Used Sterilization for sale (222)

Year of construction: 2001, condition: used, The Pall CFS system is designed as a single unit and can be installed directly in front of the filling line without the need for a buffer system. It is a completely independent process unit consisting of the following components: filter vessel Piping and connections Membrane cleaning system (CIP) integrity check Switchboard The hygienic design, the simple integrity test and the full automation ensure the microbiological safety of the system and usually allow the operation of the filling staff. Cluster filtering groups filter elements into clusters. Each cluster has its own outlet valve. During filtration, all clusters are open. Cleaning, sterilization and integrity testing are performed per cluster. Advantages of the CFS principle; Longer life Integrity testing on site Integrity diagnostics per cluster Special rinsing High specific flow rate Short flush times Constant flow in all candles Minimal water consumption Quick replacement of filter elements Controlled backwash Minimal beer loss High biological safety Constant availability With this filter system only preclarified products may be filtered, which have normally filterable properties in their composition. Max. filtration flow: 400 hl/h continuous Permissible operating pressure: 6 bar Permissible operating temperature: 105 °C Volume: 1456 l Current: 10 A Voltage: 220 V Blsdpfx Aevcqx Djktep Water: cold water: min. 150 hl/h; hot water (max 65 ° C): min. 150 hl/h Compressed air: prepared compressed air: 4 - 6 bar; control air: 5 - 8 bar Length: 1,40 m Width: 1,20 m Height: 1,85 m Weight: 3450 kg Base construction: basic frame with control and measuring components and filter container; cleaning module Features: 98 filter cartridges, 3 piston diaphragm pumps (Dosage), centrifugal pump with frequency converter (WT circuit), various analog and digital sensors (flow, pressure, level, temperature, conductance), various valves, control cabinet

Condition: used, Year of construction: 2022, functionality: limited functionality, Complete, industrially manufactured water treatment system for ultra-pure, demineralized water, 400 l/h (< 3 µS/cm, depending on the raw water), delivered in December 2022. Multi-stage: raw water filter Berkofin KS25 HWS, compact demineralization ion exchanger BerkeSOFT midi 2-45, reverse osmosis Terion-S 500 with pressure pump/membrane modules, electrodeionization (CEDI), NaOH dosing for CO₂ removal, UVC sterilization Aquafides 1AF4+. 980-liter pure water storage tank with E+H Levelflex FMP51 and capacitive level sensors. Frequency inverter-controlled pressure boosting, 2 m³/h at 6 bar. High-quality industrial components (including KSB, Grundfos, Calpeda, WIKA, Bürkert, Balluff). Bodpfx Akjzmap Nstelp Technical data: - Capacity 400 l/h, < 3 µS/cm; RO membrane set valid until 28.07.2025 (approx. 265 m³ treated) - UV lamp replaced on 01.10.2025 (approx. 5,350 operating hours); storage tank 980 l; pressure boosting 2 m³/h at 6 bar, frequency-controlled - Note: CEDI unit currently defective/clogged, capacity currently ~20 l/h; repair offer dated 24.09.2025 is available. Extensive documentation and manuals are available. More systems and equipment are continuously being offered for sale from a laboratory and pilot plant liquidation – inquiries are welcome. Sold on behalf of the customer through the Köck auction house. Located in eastern Austria, exact address upon request. Collection/dismantling by the buyer.

Condition: used, Unused and never installed Steriline sterile vial filling line made in 2021 with an output capacity of 24,000 pieces/hour. Designed to operate in ORABS (Open Restricted Access Barrier System) containment system and currently capable of filling into vial sizes 6R (5ml) and 2R (2ml) with lyo / injection stoppers or alu caps. (OEM can provide change parts for alternative sized vials and cap formats.) Major equipment includes: - Rotary washing machine RC-V8 - Depyrogenating tunnel ST9-CCS - Tray Loader / TL2 - (4) LAF (Laminar Air Flow) Units - Vial filling machine VFM400 + oRABS - Swing way belt SWB1 + oRABS - Positive diverting system PDS + oRABS - Vial capping machine VCM400 + oRABS - Swing way belt SWB2 - Connection belt LBT Bljdpfszi D Izsx Aktsp - Swing way belt SWB3 - Rotating table RT Full design specifications available.

Condition: used, Year of construction: 2018, machine/vehicle number: LC667, Used GEA Aseptic filling line 48000 BPH - year 2020 (data of use)Technical Specifications & Performance DataThis used bottling line is a 2020 PET aseptic production line configured for 230 ml PET bottled water at a rated output of 48,000 bph. It combines PET bottle blowing, aseptic processing, filling, capping, labeling, inspection and secondary packaging for high-output beverage production.* Production capacity: 48,000 bph* Available bottle format: 230 ml PET only* Main line year: 2018, 2020 (data of use)* Blowing equipment: SIPA SFR24 EVO, 48,000 bph* Filling equipment: GEA FILLSTAR FX AS 84 PET filler, 48,000 bph* Compressor: AF L5S, 35 bar, 220 kWAdvanced Automation & Control SystemsThe line includes electrical control cabinets with HMI displays, ventilated electrical enclosures and high-voltage warning protection. Process equipment includes a Tetra Pak FLEX1 PET UHT sterilizer rated at 17 t/h, a Tetra Pak 15,000 L/h homogenizer rated at 90 kW, a 15,000 L/h yogurt secondary pasteurizer, pulsed-light sterilizers, laser marking machines and visual inspection systems.Product preparation assets include four 25 m³/h centrifugal pumps rated at 7.5 kW, two 30 m³/h centrifugal pumps rated at 18.5 kW, one 12,000 L/h rotary pump rated at 7.5 kW and one 20,000 L/h rotary pump rated at 18.5 kW. The installation also includes a triple 100 mm high-pressure filter, model ECS7003SCA5H19-A61.Production Line Integration CapabilitiesThe PET production line integrates bottle blowing, drying, aseptic filling and capping, cap handling, labeling, coding, inspection, carton packing, sealing and conveying. A GEA conveyor chain system provides bottle transport at 20 to 60 m/min. Five bottle dryer sets with conveyors are included, together with two GEA dryers rated at 700/840 m³/h.Machine type | Manufacturer / model | YearMachine typeManufacturer / modelYearBlow Molding MachineSIPA SFR24 EVO2020 (data of use)Filling MachineGEA FILLSTAR FX AS 84 PET2020 (data of use)Labeling MachineGuangzhou Lixin AP-400H2020 (data of use)Labeling MachineGuangzhou Santuo SL-695 Bedpfezwu Uuox Aktelp

Condition: new, Tuttnauer T-Edge 11 Tabletop Autoclave The fully automatic T-Edge 11 sterilizer is much more than just an autoclave. Your skills are needed in your practice, and your time is a crucial factor. The T-Edge therefore frees you from unnecessary effort. Meets strict international standards Clinically proven applications High-resolution touchscreen Innovative technology Easy-to-use interface Elegant design Excellent user experience Sterilization at the touch of a button Select the desired program and press "Start." The autoclave takes care of everything else - "click and go." Bedpeyk D Edjfx Aktelp Technical data Chamber dimensions ø x L: 280 x 460 mm Chamber volume: 27 liters External dimensions W x H x D: 500 x 500 x 580 mm Tray dimensions (W x H x D): 421 x 207 x 20.5 mm Power supply: 50/60Hz, 230V-1Ph+N+GND Connections: 1 Ethernet port, 2 USB ports, WLAN, integrated connection for automatic water supply and drainage Weight: 56 kg 0 cycles Year of manufacture: 2023 You can find more new and used items in our shop! International shipping costs on request!

Condition: excellent (used), Year of construction: 2022, operating hours: 54 h, functionality: fully functional, machine/vehicle number: 3W2I324202513, Equipment: charge status display, lighting, ALIEN-X The latest C-arm version introduced to the market in January 2019 (our unit manufactured in 2022). The system is designed to have a working performance similar to an angiography unit or a stationary hemodynamics unit; therefore, it will not be affected by the high temperature of the X-ray unit or other components. The C-arm movement is both motorized and manual. Isocentric active anti-collision system geometry on the FPD and X-ray side. Compact and stable with a perfectly balanced C-arm, which is safe for all movements. Excellent maneuverability thanks to two large anti-static steering wheels. Latest generation start & stop system with excellent ergonomics and easily recognizable (color-coded) steering wheels. Durable cable connections between the C-arm and the trolley, resistant to mechanical damage, special paint for quick cleaning and disinfection. Generator power: 25kW Detector: 3030 X-ray tube: dual focus 0.3-0.5 mm Anode speed: standard and high speed available Control console: no. 2 synchronized ETS15-18 (on the C-arm and on the trolley) ETS15-18: real-time images and reference images displayed C-arm movements: manual – motorized – hybrid C-arm position storage: no. 4 arbitrary positions Anti-collision systems: active systems on both the FPD and X-ray tube side Adjustable monitor: 4K Small-sized trolley: separate from the C-arm Foot pedal Bljdpfxez Dft Eo Aktep New EPB power supply systems X-ray tube Alien X uses the latest generation of X-ray tubes with a titanium, zirconium, and molybdenum (TZM) plate. The advantages compared to using pure molybdenum plates are: better resistance to deformation, higher recrystallization temperature, and higher thermal resistance. Anode capacity 400 kHU 104 kHU/min anode dissipation High anode rotation speed Dual focus 0.3-0.5 mm 1200 W dissipation in the housing WAD + EHC WAD (Water Aided Dissipation): X-ray tube cooling system; through the combination of dielectric oil management within the radiology complex, coolant, and an advanced heat exchanger, there are no fans in the sterile field. EHC (Eurocolumbus Heat Control): real-time control of the heat generated with immediate actions to change frames/s and/or pulses and/or imaging and radiological parameters to ensure optimal system operation and avoid overheating. Manual with motorized drive – HYBRID The Alien X C-arm movement can be done both manually and with a motor; manual movement is easy, and the system can be operated simply and ergonomically thanks to dedicated handles. Hybrid movement allows the combined use of both movements. Motorized horizontal movement is also available as an option. This option is mandatory if the EIC package is required. EPD anti-collision system However, it should not be overlooked that a flat detector must have certain important features, regardless of the technology used, namely: 16-bit DQE ≥ 75% MTF ≥ up to 55%

Year of construction: 1995, condition: used, This filter system may only be used to filter preclarified products that have normal filterable properties in their composition. Max. filtration flow: 400 hl/h continuous Permissible operating pressure: 6 bar Permissible operating temperature: 105 °C Bledpfx Aksvcqv Netep Volume: 1456 l Current: 10 A Voltage: 220 V Water: cold water: min. 150 hl/h; hot water (max 65 °C): min. 150 hl/h Compressed air: prepared compressed air: 4 - 6 bar; control air: 5 - 8 bar Weight: 3450 kg Base construction: basic frame with control and measuring components and filter container; cleaning module Features: 98 filter cartridges, 3 piston diaphragm pumps (Dosage), centrifugal pump with frequency converter (WT circuit), various analog and digital sensors (flow, pressure, level, temperature, conductance), various valves, control cabinet

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 103, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, type plate available, FOOD STERILIZATION DEVICE EQUIPPED WITH FLOW METER, HEAT EXCHANGER, AND CHAIN CONVEYOR FOR BASKETS Bsdpfxow Ekkde Aktelp

Condition: used, Year of construction: 2004, operating hours: 33,411 h, machine/vehicle number: M308, Aseptic Carton Filling Monoblock CFA406-32 This used SIG Combibloc aseptic carton filling monoblock is engineered for reliable, high-quality filling of fruit juices and still drinks into SIG COMBIBLOC cartons. Built in 2004 and maintained in professional industrial packaging environments, it offers stable performance at 2.0L format with consistent output suitable for beverage production. With a complete set of auxiliary equipment, it integrates smoothly into a used bottling line or second hand industrial packaging setup seeking aseptic carton filling capability. Manufactured by SIG Combibloc, the CFA 406 series is known for precise dosing, hygienic design, and dependable operation in high-demand beverage production. This unit is accompanied by a sterile air system and downstream handling including evacuation and buffer tables, conveyors, and a Combiswift cap applicator, making it a compact solution for carton packaging lines. Bljdpo Adt Rfofx Aktep Technical Specifications & Performance Data Manufacturer: SIG Combibloc Model: CFA406-32 Year: 2004 Packaging/carton: SIG COMBIBLOC Container volume: 2.0L Capacity: 5000 pieces/hour Operating hours: 33411 h Products: fruit juices and still drinks Equipment composition: CFA 406 filler (2004); Sterile air system (2004); Evacuation table (2004); Buffer table (2004); Cap applicator/Combiswift (2002); Tray packer (2004); Conveyors (2004) Last service: 12/2019 Shutdown: 06/2020 Advanced Automation & Control Systems Designed for aseptic operation, the line features a sterile air system to maintain controlled, hygienic conditions in the filling zone. The equipment supports stable, repeatable filling performance suitable for 2.0L carton formats with precise handling through integrated tables and conveyors. Quick format handling within the CFA series allows efficient setup aligned with industrial packaging standards. Production Line Integration Capabilities This aseptic carton filler integrates seamlessly with upstream and downstream packaging machinery. The included evacuation table, buffer table, conveyors, and tray packer streamline product flow and accumulation, supporting smooth line balancing. The Combiswift cap applicator enhances closure application on cartons, enabling comprehensive line functionality for beverage production focused on cartons. Machine Condition & Maintenance History The machine underwent its last service in December 2019 and was shut down in June 2020. It is currently dismantled and stored. During removal, certain components were taken off and are now missing: 9 switches, 3 photocells, and 10 sensor cables. Overall, the unit presents as a well-maintained, second hand aseptic filling solution with documented service and clear storage status. Operational Performance & Versatility Optimized for fruit juices and still drinks, this carton filling monoblock supports consistent 2.0L SIG COMBIBLOC packaging. The integrated cap applicator allows closure application suited to carton systems, while the sterile air module supports aseptic standards for sensitive beverage categories. Its throughput of 5000 piec...

Condition: excellent (used), Year of construction: 2001, TUBULAR JUICE UHT STERILIZER MADE BY KF ENGINEERING, GERMANY Bljdpfev Tl D Njx Aktep CAPACITY 11 TONS PER HOUR FOR ALL JUICES, INCLUDING TOMATO MAX TEMP. 124 DEGR. C. PLC SIEMENS-7

Condition: ready for operation (used), Year of construction: 2007, operating hours: 17,200 h, functionality: fully functional, total height: 3,250 mm, total width: 2,000 mm, total length: 7,870 mm, type of input current: three-phase, input voltage: 400 V, pressure: 90 bar, operating pressure: 90 bar, power: 120 kW (163.15 HP), compressed air connection: 6 bar, control voltage: 400 V, overpressure (max.): 100 bar, input frequency: 50 Hz, Sterilizer for natural and concentrated fruit and vegetable purees. Max. product infeed 5- 10,000 kg/h, depend of the product, sterilization temperature up to 110°C , holding time up to 120s. Steam consumption 2100kg/h. Complete with buffer tank 5000L, screw pump, piston pump, vacuum pump and filling machine MakropackTM2000_3 for aseptic filling of 220-liter bags. Bledpfszpx Shox Aktjp

Condition: used, Year of construction: 2011, Overview Complete turnkey craft brewery built around a 4-vessel Newlands Systems (NSI) brewhouse with a 35 hl brew length, delivered from Canada and installed in 2011-2013. The plant covers the full process chain: malt intake and milling, brewhouse, fermentation and maturation, yeast handling, CIP, steam and glycol cooling. Fermentation capacity is 9 x 70 hl cylindroconical fermenters plus 2 x 70 hl pressure-rated bright beer tanks. The brewhouse runs on a Siemens Braumat control system. The brewery is still installed and under power and can be visited in operation. Technical data - Manufacturer: Newlands Systems (NSI), Canada - Year of manufacture: 2011-2016 - Machine type: complete turnkey brewery, 4-vessel brewhouse - Brew length: 35 hl - Brewhouse vessels: mash mixer 44 hl, lauter tun 69.85 hl, boil kettle 58 hl, whirlpool - Fermentation and maturation: 9 x 70 hl fermenters, 2 x 70 hl bright beer tanks - Steam: 750 kW electric steam boiler, operating pressure approx. 4 bar - Control system: Siemens Braumat - Power supply: 3 x 400 V / 50 Hz Scope of Delivery - Brewhouse | Newlands Systems | 4-vessel, 35 hl brew length | Mash mixer, lauter tun with rakes, boil kettle with internal calandria, whirlpool, wort heat exchanger, progressive cavity grain-out and spent grains pumps, post-whirlpool solids filter | 2011 - Control system | Siemens | Braumat | Brewhouse control panel and operator station | 2011 - Hot liquor tanks | Newlands Systems | 2 x 60 hl, stacked | External steam heat exchanger, pumps and valving, 316 stainless wetted surfaces, water treatment dosing bin | 2012 - Fermenters | Newlands Systems | 9 x 70 hl working volume | Cylindroconical, 60 degree cones, standpipes, cooling jackets | 2012-2013 - Bright beer tanks | Newlands Systems | 2 x 70 hl working volume | Pressure rated, carbonation stone assemblies | 2012-2013 - Yeast storage tank | Newlands Systems | 700 l | Conical, cooling jacket, mixer | 2013 - Yeast propagator | Newlands Systems | 240 l working volume | 300 l total volume, AISI 304 stainless steel | 2012 - CIP station | Newlands Systems | Steam heating and pump | 2012 - Malt silo | MAFA Sweden | UNB 70 | 30 t capacity, outdoor installation | 2012 - Auger system | MAFA Sweden | Silo and mill connections, flexible auger, specialty grains dump hopper | 2012 - Malt mill | Bühler | 4-roller | 3.0 kW drive, ATEX marked | 2012 - Grist hopper | Newlands Systems | 1,000 kg | On load cells | 2012 - Electric steam boiler | Pannpartner | 750 kW | 3 x 400 V / 50 Hz, design pressure 16 bar, empty weight 800 kg, CE marked | 2011 - Glycol chiller | Daikin | Air-cooled water chiller, refrigerant R407C, 400 V | 2011 - Sterile air unit | Donaldson | 2016 - Pumps, fittings and accessories | 2012-2013 Bljdpfx Ajzza Dijktjp Condition Used - still installed and under power, available for inspection in production. Availability Immediately. Location: Norway. Dismantling, handling, packing and truck loading can be quoted on request (EXW).

Year of construction: 2023, condition: like new (used), functionality: fully functional, ESCO Airstream Gen 3 Vertical Laminar Flow Cabinet Type: LVG-3AG-F8 Bljdpsz D Tkfjfx Aktsp Airstream Gen 3 Vertical Laminar Flow Cabinet While others rely on traditional PSC motors, the Esco Airstream® Gen 3 Vertical Laminar Flow Cabinet is the only vertical-type clean bench in the market that uses Direct Current Electronically Commutated Motor (DC ECM) technology. Reducing energy costs by up to 70%, these clean benches are the greenest ones yet. The secret to achieving energy savings through ECM technology lies in its high electrical efficiency and ability to run precisely on programmed speeds. Enjoy low heat and noise emission as well with the Esco Airstream Gen 3 Vertical Laminar Flow Cabinet. Esco's laminar air flow cabinet is a product of robust engineering combined with strategic ergonomic design. It provides long-term reliability and ultimate user comfort making it ideal for non-hazardous applications that need a sterile environment

Year of construction: 2024, condition: like new (used), functionality: fully functional, Stainless steel steam sterilization autoclave Pass-through autoclave, GXMQ-KK.13.8JS Model: STAU-26.3 Serial No.: G2310 Power: 11 kW Voltage: 380V/50Hz & 230V/50Hz Operating pressure: +0.5 bar / -0.88 bar Weight: 20,000 kg Bedez Td Alspfx Aktjlp Self-dismantling and removal included.

Condition: good (used), Icon Engineering Steriliser tunnel Blsdpszzf E Eofx Aktop Stainless, cold water steriliser tunnel, stainless chain belt, belt dimensions 1800mm x 360mm, max product height 250mm, variable speed, with recirculation pump, air knife, 3Ph

Condition: new, Year of construction: 2020, functionality: fully functional, BOSCH Pharmatec CIP System 8X0400 – Never Used – GMP Pharma Version Blodpfx Aozpy Nzoktop For sale is a complete BOSCH Pharmatec CIP (Cleaning in Place) system in new condition (Never Used). The system was manufactured in 2019/2020 but was never put into operation. Since delivery, it has been stored professionally and is in excellent condition. The system was developed according to the highest GMP standards and is ideally suited for the pharmaceutical, biotechnology, vaccine, and food industries. Technical Data Manufacturer: Bosch Pharmatec GmbH (now Syntegon) Type: CIP Unit 8X0400 Year of Construction: 2019 / 2020 Condition: Never Used / New GMP Version Stainless Steel Design CE Marking Immediately available Scope of Supply BOSCH Pharmatec CIP Unit 8X0400 Stainless Steel Water Tanks CIP Satellites Complete Pump Skids KPA Hygienic Pumps Endress+Hauser Measuring and Control Technology Hygienic Stainless Steel Piping Valves and Fittings Heat Exchangers Original Bosch Documentation P&ID Flow Diagrams Layout Drawings and Technical Documents Important Note The system is offered without pneumatic components and without control (automation). This allows the system to be individually adapted to the buyer's requirements and equipped with a modern PLC, pneumatic, and automation solution as desired. This offers maximum flexibility for new installations or integration into existing production facilities. Application Areas Pharmaceutical Industry Biotechnology Vaccine Production Sterile Production Facilities API Manufacturing Supply of Purified Media GMP Production Plants Contract Manufacturing (CMO) Advantages Original Bosch Pharmatec Quality Never Put Into Operation High-Quality GMP Version Complete Technical Documentation Available Flexible Retrofitting of Control and Pneumatic Technology According to Customer Requirements Immediately Available Significantly Cheaper Than a Comparable New System The system can be inspected by appointment. We will gladly send you further photos, technical documents and drawings upon request.

Condition: used, Year of construction: 2012, machine/vehicle number: PST30, Used Tetra therm aseptic pasteurizer - 2012Technical Specifications & Performance DataThis aseptic pasteurizer delivers reliable high-temperature short-time processing for demanding beverage production. Engineered within the Tetra Therm family and manufactured in collaboration with Alfa Laval, it is configured for aseptic operation with integrated deaeration for quality preservation in sensitive products. As a second hand unit from industrial packaging environments, it offers strong performance for a used bottling line or a standalone processing cell.Machine type: Aseptic Pasteurizer (Flash)Brand: Tetra Pak (engineered with Alfa Laval)Model: CM6-SMYear: 2012Production capacity: up to 12,000 L/h (current setting approx. 6,000 L/h)Maximum process temperature (TS): 125 °CMaximum allowable pressure (PS): 6.0 barTest pressure (PT): 8.6 barProcess volume: 162.0 LFluid group: 2Deaerator: IncludedCE conformity: CE 0409Test pressure date: 2012-11-28Advanced Automation & Control SystemsDesigned for modern beverage production, this aseptic pasteurizer supports automated temperature control and stable holding conditions suited to HTST workflows. It is compatible with typical PLC/HMI architectures used in bottling equipment and packaging machinery, enabling recipe management, alarm handling, and trending through standard plant control systems. Safety interlocks and CE-compliant protections contribute to consistent operation and operator safety during process and cleaning phases.Production Line Integration CapabilitiesBuilt for inline placement within a beverage production or used bottling line, the unit integrates upstream with preparation and deaeration modules and downstream with sterile tanks, fillers, or homogenizers typical of industrial packaging. Format agility at the process level makes it suitable for multiple juice recipes and still beverage SKUs, helping plants adapt to seasonal or private-label demands without extensive hardware changes.Machine Condition & Maintenance HistoryThis is a second hand aseptic pasteurizer previously used for tomato juice and still (non-carbonated) drinks. It is presented as operationally ready for deployment, offering a practical choice for producers seeking proven equipment with established performance characteristics in beverage processing environments.Operational Performance & VersatilityThe system’s aseptic flash process, 125 °C temperature rating, and integrated deaeration help protect color, aroma, and nutritional attributes while reducing dissolved oxygen for improved shelf life. Its capacity range—currently set around 6,000 L/h with headroom to 12,000 L/h—supports both pilot-scale and medium-scale beverage production. This configuration is well suited to juice applications and other still beverages requiring controlled thermal treatment.Installation Requirements & Site PreparationThe pasteurizer is typically skid-mounted for straight... Bljdjz E Dlcspfx Aktop

Condition: used, Year of construction: 2013, Overview This KHS Innopro KZE 72 is a flash pasteurizer (short-time heating system) for beer, cider and other carbonated beverages, built in 2013 by KHS GmbH (Dortmund, Germany). Working with a plate heat exchanger, it gently pasteurizes at a nominal capacity of 72 hl/h and is designed for a product flow between 24 and 72 hl/h with a maximum CO₂ content of 6.5 g/l. The system comes complete with its 50.8 hl buffer tank and the control cabinet with touchscreen HMI. The unit comes out of a large brewery, is still installed and can be visited on request. Technical data - Manufacturer: KHS GmbH (Dortmund, Germany) - Model: Innopro KZE 72/T4-72-12/PT45A - Year of manufacture: 2013 - Machine type: flash pasteurizer with plate heat exchanger - Nominal capacity: 72 hl/h - Minimum adjustable capacity: 24 hl/h - Capacity during CIP cleaning: 85 hl/h - Maximum CO₂ content in the product: 6.5 g/l - Pasteurization temperature: 72 °C (beer) / 85 °C (cider) - Holding time: 30 s - Product inlet temperature: 4 °C; product outlet temperature: max. 4 °C - Supply pressures: product 3.5 bar(g), steam 3 - 6 bar(g), coolant 1.5 - 2 bar(g), CIP 4 bar(g) - Electrical connection: 400 V, 50 Hz, 3-phase - Dimensions pasteurizer skid: approx. 4,600 x 3,500 x H 2,900 mm - Weight pasteurizer skid: approx. 3,100 kg (frame incl. plate heat exchanger) Equipment - Pasteurizer skid with plate heat exchanger type PT45A, pumps and valve manifold - Buffer tank: 50.8 hl gross / 45.5 hl working volume, inner Ø 1,600 mm, H 3,420 mm, approx. 1,120 kg, operating pressure up to 5 bar(g), CO₂ and sterile air connections 6 - 8 bar(g) - Control cabinet with touchscreen HMI - OEM technical documentation (operating manual) Condition Bsdpfx Akjzvfbcstolp Used - good working condition. The system was in production in a large brewery until recently, is still installed and can be inspected. Availability Immediately. Location: Netherlands. Dismantling and loading by arrangement.

Condition: used, Year of construction: 2011, Water treatment plant from Grünbeck for treatment of brewing and process water. Fully mounted on a stainless steel frame and controllable via Simatic S7-300. Reverse osmosis system for removing hardness compounds, salts, particles and micro-contaminants from water. This produces brewing water with the desired hardness. To protect the membranes, coarser particles are first removed in two fine filters (with pore sizes of 50 µm and 5 µm respectively). Desalination then takes place in two pressure pipes containing membrane modules. Includes sterilization filtration, membrane modules, chemical dosing, centrifugal pump, piping, valves, measurement technology, and control cabinet with touch panel. Additional title: reverse osmosis Permeate capacity: 8000 l/h ; Feed: 10000 l/h Recovery: 80 % Concentrate: 2000 l/h Max. overpressure: 16 bar Power: 6.5 kW Voltage: 3 x 380 - 415 V Bedpjz E Rv Ujfx Aktelp Frequency: 50 Hz Water: feed 2.5 - 5 bar Length: 5000 mm Width: 1000 mm Height: 2000 mm Operation / Control: Simatic S7-300 Material: membranes from polyamid Base construction: on stainless steel frame with feet Features: 2 fine filters; pressure pipes with membrane modules; chemical dosing system with two dosing pumps; centrifugal pump (Lowara); various pipes, valves, and measurement equipment; control cabinet with touch panel

Year of construction: 2018, condition: used, This listing is for a Solaris Biotech Solution Jupiter 3.0 Fermentor. The unit is in full working condition and is ready for immediate release. Bledpfjxxz T Hex Aktsp The Solaris Biotech Solution Jupiter 3.0 Fermentor is a highly versatile and configurable bioreactor system, ideal for laboratory-scale applications. With advanced automation and robust design, it caters to a wide range of research and development needs, as well as small-scale production. Key Features: Autoclavable and Sterilizable Design: Ensures ease of cleaning, sterility, and reliable operation for contamination-free processes. Flexible Vessel Options: Available in various aspect ratios and thermoregulation designs, with total volumes ranging from 2.0 L to 10.0 L. Pressure Control: Handles pressures up to 1.6 bar in the 2 L and 4 L jacketed vessels, with continuous gas-in and gas-out flux. Innovative SCADA Software (LEONARDO 3.0): Provides automated management of fermentation and cultivation processes, ensuring precision and ease of operation. Parallel Management: Supports simultaneous operation of up to 24 units via a single HMI with a 24” display, streamlining complex workflows. Remote Access: Enables monitoring and control via PC, tablet, or smartphone, using QR code scanning or a dedicated web portal for remote convenience. Applications: Process Development and Optimization: Facilitates experimentation and optimization of bioprocesses for scale-up and scale-down studies. Education and Research: Suitable for educational purposes and basic research in bioprocessing. Small-Scale Production: Supports small-batch manufacturing and pilot-scale processes. Benefits: Cost-Effective Performance: Combines advanced features with affordability for laboratory and production environments. High Level of Automation: Simplifies management of fermentation and cultivation with LEONARDO 3.0 software, reducing operator workload. Versatility and Configurability: Adaptable to a wide variety of applications, ensuring compliance with validated GMP regulations. Technical Specifications: Material: VALOX resin (external) and silicone (internal) Autoclavable: 121-133°C for up to 30 minutes Residual Volume: 0.04 mL Flow Rate: 65 mL/min

Condition: used, This listing is for a Keith Shuttleworth & Associates SQ1 Steam Quality Test Kit The unit is in full working condition and ready for immediate use This steam quality test kit is a high-quality lab instrument manufactured by Keith Shuttleworth & Associates (Model: SQ1). This portable system is designed for testing the quality of steam used in sterilization processes, ensuring compliance with industry standards such as EN 285. It includes the primary condenser unit, pressure gauge, and various accessories housed in a durable carrying case for field use. It has been sourced directly from a working facility, offering premium performance and dependability for standard laboratory applications while ensuring a cost-effective alternative to purchasing brand new equipment. Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. Bljdpfx Akj Agpwgetjp specifications_en: Cooling In: Max 4 BARG / 60 PSI; Steam In: Max 7 BARG / 100 PSI.

Year of construction: 2002, condition: used, This listing is for the Ehret STE 1610/2/100 Sterilising Oven. The unit is in full working condition and is ready for immediate use. Overview The Ehret STE 1610/2/100 Sterilising Oven is a high-performance dry heat sterilizer designed for reliable and consistent sterilization of laboratory and pharmaceutical materials. Manufactured by Ehret, a trusted German brand in thermal processing equipment, the STE 1610/2/100 delivers precise temperature control and robust performance, making it ideal for applications requiring sterilization without moisture, such as glassware, metal instruments, and heat-stable laboratory components. Key Features Precise Dry Heat Sterilization High-Temperature Range: Operates up to 250 °C, suitable for complete sterilization and thermal decontamination. Uniform Temperature Distribution: Advanced air circulation ensures even heat distribution throughout the chamber. Validated Sterilization Cycles: Ideal for sterilizing glass, metal tools, and other heat-resistant materials with accuracy and repeatability. Robust Construction & Ergonomic Design Durable Stainless Steel Chamber: Corrosion-resistant and easy to clean, suitable for repeated sterilization cycles. User-Friendly Controls: Digital temperature controller with display for accurate setpoint adjustment and monitoring. Safety Features: Over-temperature protection, door interlock, and visual/audio alarms for enhanced operational safety. Technical Specifications Model: STE 1610/2/100 Temperature Range: Ambient +5 °C to 250 °C Chamber Volume: Approx. 100 litres Heating Method: Electrically heated with forced air circulation Temperature Control Accuracy: ±1 °C Construction: Stainless steel inner chamber; powder-coated steel exterior Control System: Digital PID controller with safety cut-off and time functions Power Supply: 230 V / 50–60 Hz (depending on configuration) Applications Pharmaceutical Laboratories: Dry sterilization of vials, stoppers, and instruments Medical Facilities: Sterilizing surgical tools, metal parts, and reusable components Research & Diagnostics: Sterilization of labware and experimental setups Industrial & QA Labs: Heat treatment, drying, and thermal conditioning of materials System Components Electrically heated drying/sterilization chamber Forced air circulation fan for uniform heating Digital control panel with setpoint and actual temperature display Safety thermostat with alarm system Removable shelving for flexible loading Quality Assurance All Ehret STE ovens are manufactured in compliance with DIN and ISO standards and undergo rigorous quality testing at the factory. Designed for reliable long-term use, the units support calibration, validation (IQ/OQ), and GMP documentation where required. Benefits Reliable Sterilization: Proven performance across thousands of cycles Accurate & Uniform Heating: Ensures consistent results and safe sterilization Low Maintenance: Durable components and easy-to-clean surfaces Safety-Compliant: Built with laboratory and industrial safety standards in mind Compact Footprint: Fits easily into lab or cleanroom environments Bljdpfx Ajxhflxektjp Conclusion The Ehret STE 1610/2/100 Sterilising Oven is a dependable, precision-controlled dry heat sterilizer built for modern lab and pharmaceutical environments. Its combination of German engineering, validated performance, and operator-friendly design makes it a trusted solution for high-integrity sterilization processes.

Year of construction: 2020, condition: refurbished (used), functionality: fully functional, Refurbished at Industrial Microwave Services Ltd to comply with UK Safety Standards. • Manufacturer/Brand: Tianjin Leici Electronic Technology Co., Ltd. (A prominent Chinese specialized manufacturer of industrial microwave drying systems and component integration). • Core Subsystem Model: MG1000 (Specifically utilizing the MG1000 Microwave Inverter Power Supply units coupled with dedicated industrial air-cooled magnetrons which have been upgraded). • Equipment Classification: 18kW Industrial Tumbling Cage Microwave Drying/Sterilization Oven. The 18kW total operating rating is achieved structurally by stacking 18 modular 1kW MG1000 power-and-magnetron sets together inside the machine grid. Machine External Dimensions: 1550mm Wide - 1178mm Depth - 1800mm High Blsdpfxjyv H T Aj Aktjp Internal Cavity Depth: 900 mm Door Width: 680mm 6 x Internal S/S trays - 805mm long - 295mm Wide - 9mm Depth 18Kw at 100amps 3 phase + neutral needed Weight approx. 500kg. Refurb Notes 1. Control system being fitted with a siemans PLC, controlled from a 4” siemans H.M.I. 2. Applicator structural strengthening and seam welding of all joints. 3. Emergency stop safety systems to conform to U.K. safety standards. 4. Strengthen the main frame to enable the equipment to moved without damage. 5. Improve the Magnetron launch inputs to the cavity. 6. Fit serviceable covers on all Magnetron ports inside applicator cavity.

Year of construction: 2020, condition: ready for operation (used), An autoclave Stock DFT including a Jumag steam system for the food industry is available. Batch trolley capacity: 2, process method: steam-water spraying, application: sterilization/pasteurization, gross volume: approx. 1550l, steam system: Jumag DG560, steam output: approx. 560kg/h. Including 6 batch trolleys. Documentation available. An on-site inspection is possible. Bledpfx Ajyh Nvgsktjp

Condition: used, Year of construction: 2007, Overview This KHS Corvus is a skid-mounted cartridge filtration system (microfiltration), built in 2007 by KHS AG in Dortmund, Germany. Four stainless steel KHS cartridge filter housings for 40-inch cartridges are connected through a pneumatically operated valve manifold and controlled from the skid's own stainless steel control cabinet with Siemens PLC. The Corvus range is designed for clarifying filtration, cold sterile filtration and safety filtration of wine, beer and water ahead of the filler. This unit was last used for wine filtration in a bottling line. Technical data Bledpoz Hb Scofx Aktsp - Manufacturer: KHS AG (Dortmund, Germany) - Model: Corvus - Year of manufacture: 2007 (filter housings 2006) - Machine type: cartridge filtration system (microfiltration), skid-mounted - Filter housings: 2 housings for 19 cartridges of 40 inch, 143 L each; 2 housings for 12 cartridges of 40 inch, 108 L each - Housing design ratings: max. 10 bar at up to 90 °C, max. 2 bar at 121 °C - Material: stainless steel - Overall dimensions: approx. 3,600 x 1,700 x H 3,750 mm Equipment - 4 CE-marked KHS cartridge filter housings - Pneumatically operated valve manifold with stainless steel piping - Pressure gauges and process instrumentation - Stainless steel control cabinet with Siemens PLC and pneumatic valve terminals - Stainless steel skid frame with mesh safety guarding Condition Used. Still installed and can be inspected by appointment. Availability Immediately. Location: Belgium.