Used Stop Baking for sale (8,098)

Year of construction: 2026, condition: new, The PD 100 e length stop with servo motor drive has a modern control positioning device that ensures that the carriage holds the material in the desired position even under load. The control provides information in three display fields about the actual value, the target value and the number of pieces to be processed (option). Motorized retraction of the carriage is possible. Existing machines / roller conveyors can be retrofitted at any time. Product Details: • Positioning control for automatic positioning • Possibility of positioning according to absolute or incremental dimensions • easy-to-read LED display for nominal size, actual size and quantity (option) • Carriage with DC servo motor and encoder Dkodpfx Anefv T Nmsqep • Trolley with 12 ball bearings • Control positioning device • Positioning accuracy 0.1 mm/m • Steel guide rail with precision toothed rack • Steel carrier profile as dirt protection • Stop arm with spring damping • Additional mountable stop extension l = 200 mm • Standard measurement lengths: 1m to 6m, maximum up to 20m • Total length of the system = measuring length + 0.6 m • Left or right hand versions available • Accesories: -Arm retraction with impact damping via pneumatic cylinder -Piece counter for number of pieces/cuts made -programmable NC control with 3000 memory locations -Different material roller conveyors on request It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Year of construction: 2026, condition: new, The PD 50 e length stop with servo motor drive has a modern control positioning device that ensures that the carriage holds the material in the desired position even under load. The control provides information in three display fields about the actual value, the target value and the number of pieces to be processed (option). Motorized retraction of the carriage is possible. Existing machines / roller conveyors can be retrofitted at any time. Product Details: Dkedpfx Anjfv T Dwjqjp • Positioning control for automatic positioning • Possibility of positioning according to absolute or incremental dimensions • easy-to-read LED display for nominal size, actual size and quantity (option) • Carriage with DC servo motor and encoder • Carriage with multiple ball bearings • Control positioning device • Positioning accuracy 0.1 mm/m • Motorized clearance function • Steel guide rail with precision rack • Multi-adjustable stop arm • Standard measurement lengths: 1m to 6m, maximum up to 20m • Total length of the system = measuring length + 0.5 m • Left or right hand versions available • Accesories: -Stop arm with spring damping -Arm retraction with impact damping via pneumatic cylinder -Piece counter for number of pieces/cuts made -programmable NC control with 3000 memory locations -Different material roller conveyors (e.g. roller conveyor width 290 mm or 407 mm etc.) It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Year of construction: 2026, condition: new, AUTOPOS – Motorized Length Stop for Precise Positioning The motorized length stop AUTOPOS is designed for material weights of up to 150 kg/m, making it ideal for use with profiles and solid materials made of aluminum. Dkjdpepa Nzkjfx Anqop Especially suitable for aluminum processing, with a roller width of 300 mm, for use with crosscut saws and under-table saws. Product features: ✔ Plastic roller diameter: Ø40 mm ✔ Roller width: 300 mm ✔ Load capacity up to 70 kg/m ✔ Height adjustable from 800 to 1050 mm ✔ Measuring accuracy: 0.1 mm ✔ Program with 20 memory slots for jobs ✔ Motor power: 0.16 HP ✔ Automatic positioning with max. speed of 18 m/min ✔ Slow movement at 0.6 m/min Available variants: AUTOPOS-3 – Measuring length 3000 mm, incl. job memory for 20 operations & roller conveyor AUTOPOS-4 – Measuring length 4000 mm, incl. job memory for 20 operations & roller conveyor AUTOPOS-6 – Measuring length 6000 mm, incl. job memory for 20 operations & roller conveyor AUTOPOS-8 – Measuring length 8000 mm, available on request Perfect for precise aluminum processing with high repeat accuracy and user-friendly operation. We look forward to hearing from you! Plantec Maschinen GmbH

Condition: new, Year of construction: 2024, Automatic length measuring and positioning system for all STROMAB crosscut saws, as well as similar machines from other manufacturers. It serves both as a stop and for workpiece positioning. Dkodpfx Ansxraucjqep Consists of: Aluminium profile 105 x 90 mm, anodized Toothed belt drive 32 mm, reinforced with steel wire Stepper motor 6 Nm, multi-voltage 115 - 230 V, 50/60 Hz Repeatability +/- 0.1 mm Positioning speed 60 m/min SMART 7 Control Unit with 7-inch touch screen Absolute and incremental processing mode 8 pre-set standard values 2 software versions with different optimization levels available optionally. ZM 415 – Usable working length 4,500 mm ZA333 – Roller table 4,500 x 280 mm, RD 32 mm ZA341 – Front support 4,500 x 260 mm ZA373 – Locking cable for customer’s own crosscut saw

Condition: used, Electrical contact length stops for Mubea and Peddinghaus in various lengths. The price is for a Mubea length stop 1000 mm. Dkedjf Srn Ropfx Anqop

Condition: new, functionality: fully functional, Workpiece stop made of two-tone anodized aluminum for drilling and milling machines. T-slot nut for 16mm slot 16/9/25 Includes T-slot nut, stop rod, and hex key (Allen key). Djdpfx Aneymmrroqekp

Year of construction: 1995, condition: used, functionality: fully functional, We offer this used Elumatec AMS 200 measuring stop, year of manufacture 1995. Dkedjyc N A Sopfx Anqsp Manufacturer: Elumatec Model: AMS 200 Year of manufacture: 1995 Condition: used Category: 1231 Type: measuring stop Length: 5 m If you have any further questions or need more information, feel free to send us a message or call us.

Condition: new, 2000 mm Working width 400 mm Wheel width 400 mm roll diameter 60 mm number of rolls 8 Stck. work height max. 810 - 910 mm Dedpsp S Ddbsfx Anqskp

Condition: new, 2000 mm Working width 600 mm Wheel width 600 mm roll diameter 90 mm number of rolls 8 Stck. work height max. 660 - 815 mm Colour blau / rot weight 150 kg Dedpotv Rgxefx Anqekp

Condition: new, 3000 mm Working width 600 mm Wheel width 600 mm Djdpfxjuap S Se Anqskp roll diameter 90 mm number of rolls 12 Stck. work height max. 800 - 950 mm Colour blau / rot weight 200 kg - straight version - stable construction - high load-stable stability - Height-adjustable feet

Condition: new, 3000 mm Working width 400 mm Wheel width 400 mm roll diameter 60 mm Dkedpfx Aep S Ddfjnqep number of rolls 12 Stck. work height max. 810 - 910 mm

Condition: new, 3000 mm Djdjtv Rf Ujpfx Anqjkp Working width 600 mm Wheel width 600 mm roll diameter 90 mm number of rolls 12 Stck. work height max. 660 - 815 mm Colour blau / rot weight 200 kg - straight version - stable construction - high load-stable stability - Height-adjustable feet

Condition: new, 2000 mm Working width 600 mm Wheel width 600 mm roll diameter 90 mm number of rolls 8 Stck. Dodpfx Anjtycqkeqokp work height max. 800 - 950 mm Colour blau / rot weight 150 kg

Condition: new, length 3000 mm Wheel width 500 ( 450 ) mm work height max. 880 (+/- 60) mm MADE IN GERMANY Description: - 3000 mm roller and measuring track type Exakt A standard Dedpfx Ajxaahrenqekp - with digital position indicator el. connection 230 V 50 HZ with power pack - Display in mm display (measuring range: +/- 0.5 mm on 1,000 mm) - Measuring stop can be adjusted from the workplace by means of a hand wheel - with pneumatic brake for fixing the dimensions. - Stable material stop trolley, 12 ball bearings - on a large guide profile. - The stop is adjustable and can be folded back manually. - Basic version of roller and measuring track - in stable steel construction, all versions are stationary - The suring length is the track length minus 450 mm - Ball-bearing support rollers Ø 60 x 2 mm - Galvanized conveyor roller with axis Ø 15 mm - Load capacity per meter of roller conveyor approx. 300 kg - Roller pitch 250 mm - Web width: 500 mm, usable roll width 450 mm - Construction height: 880 +/- 60 mm - Color: feet anthracite gray RAL 7016, upper part silver gray RAL 7042 - Attachment side

Condition: new, Roller conveyor with length stop. Configurable in various lengths and widths. Optionally available with driven rollers, lateral pusher, material slide, roller conveyor with weighing system, etc. Length stop can be adjusted manually, using a hand crank, or with a motor. Position can be read on a digital display. Stop can be fixed or foldable. Dsdjd A Ufbopfx Anqokp Please specify the desired length, roller width/material, and height when making inquiries.

Condition: new, Year of construction: 2025, Our SAPI "Mammut" pressure blasting unit with a 200-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Included in delivery: SAPI pressure blasting unit "Mammut 200 L" 1 1/4" pressure regulator, permanently mounted 1 1/4" water separator, permanently mounted SAPI safety shut-off Technical specifications of the pressure blasting unit: Precisely adjustable from 0.1 - 12 bar TÜV-tested with certificate 1 1/4" fixed piping inside and outside Rubber-coated metal cone with rubber seal Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity: 200 l Total height: 1,420 mm Vessel diameter: 600 mm Total diameter: 1,000 mm Weight: approx. 140 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fastest start-up and shutdown times while maintaining compliance the regulations of the professional associations (VBG 48) The pressure setting can be precisely adjusted before blasting – continuously adjustable from 0.1 to 12.0 bar Dkjdpfx Anjwc Rk Eeqsp Lower abrasive consumption, as the pressure vessel remains permanently pressurized and there is no unnecessary run-on time Upon restart, full blasting pressure is immediately available at the nozzle – no pressure build-up necessary → lower consumption & less wear on the hose No condensate formation in the vessel, as it remains constantly pressurized → no venting or venting with every start/stop Optimal abrasive dosing with a hardened fine dosing valve Less compressed air required → noticeably lower diesel consumption One-person operation, as the pressure can be displayed and adjusted directly on the pressure gauge – even without starting No failure-prone components such as control valves, diaphragms, or seals → easy to maintain and reliable Only the blasting hose in the safety shut-off device needs to be checked and replaced if necessary

Condition: new, Year of construction: 2025, Our SAPI "Mammut" pressure blaster with a 100-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the built-in pressure regulator. A water separator is also permanently installed on the blaster, which separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off system ensures safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. The pressure blaster is delivered fully operational, assembled in a space-saving mesh box. All that's required is to connect the compressed air supply and fill it with blasting media. Dodjwc Ri Iopfx Anqokp It can be easily transported by forklift or pallet truck. A lockable aluminum box is installed for storage of protective clothing, spare parts, etc. The scope of delivery includes: SAPI "Mammut 100 L" pressure blaster 1" pressure regulator, permanently mounted 1" water separator, permanently mounted SAPI safety shut-off device Abrasive sieve Cover 10 m blast hose, fully assembled, ø 25x7 mm Silicon carbide Venturi long nozzle, diameter optionally 6 mm, 8 mm, or 10 mm RED 2 sandblasting helmet Nylon/cotton sandblasting overalls 1 pair of leather blasting gloves 10 m breathing air hose, fully assembled SAF breathing air filter/activated carbon filter Wearing parts set consisting of: 100 tear-off films for RED 2 10 inner discs for RED 2 1 blast hose coupling, 25x7 mm nylon 2 rubber seals for blast hose coupling 1 nozzle holder, 25x7 mm Grid box with blast hose holder Aluminum box Lockable Technical specifications of the pressure blaster: Precisely adjustable from 0.1 - 12 bar TÜV-certified with certificate Fixed 1" internal and external piping Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity: 100 l Total height: 1,130 mm Bowl diameter: 490 mm Total diameter: 900 mm Weight: approx. 75 kg Dimensions of the mesh box: Length: 1,460 mm Width: 840 mm Height: 1,400 mm Total weight including all accessories: 260 kg

Condition: new, Our SAPI "Mammut" pressure blasting unit with a 60-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Included in delivery: SAPI pressure blasting unit "Mammut 60 L" 1" pressure regulator, permanently mounted 1" water separator, permanently mounted SAPI safety shut-off Technical specifications for the pressure blasting unit: Precisely adjustable from 0.1 - 12 bar TÜV-tested with certificate 1" fixed piping, internal and external Rubber-coated metal cone with rubber seal Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity 60 l Total height 1,130 mm Bowl diameter 360 mm Total diameter 700 mm Dedpfxewc Afho Anqekp Weight approx. 60 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fast shut-off and start-up times, while complying with the regulations of the professional associations (VBG 48) Pressure setting Can be precisely adjusted before the actual blasting process, continuously adjustable from 0.1 to 12.0 bar. Reduced abrasive consumption, as the pressure vessel remains permanently pressurized, thus eliminating unnecessary abrasive run-on. Upon restart, the full blasting pressure is immediately available at the nozzle and does not need to be slowly built up. This significantly reduces abrasive consumption and significantly reduces wear on the blasting hose. No moisture (condensate) builds up in the vessel, as the vessel remains constantly pressurized and is not vented and vented with every start and stop. This process also offers other advantages, such as: Optimal abrasive dosing with a hardened fine dosing valve Lower compressed air consumption, thus significantly reducing fuel consumption (diesel) One-person operation, as the blasting pressure is constantly displayed by the vessel pressure and can be easily adjusted on the pressure gauge without prior start-up. No failure-prone components such as control valves, diaphragms, or seals, making it easy to maintain and reliable. Only the blasting hose needs to be checked in the safety shutoff and replaced if necessary.

Year of construction: 2010, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 101258050, Submission of a bid constitutes an obligation for timely collection no later than 31/12/2025! The offer includes: Bacciottini Pit Stop WFD2H Speed (Serial number: WFD2H 1010, Year of manufacture: 2010) MB PFNET 52/4-40-ART52 (Serial number: 101258050) TECHNICAL DETAILS Number of pockets: 4 EQUIPMENT 2-bar scoring system Inline Extended feeder Dedoxyh E Sopfx Anqokp MB folding machine Gatefold pocket Delivery

Condition: used, Year of construction: 1994, functionality: fully functional, machine/vehicle number: 1425, table length: 3,300 mm, Urban sash stop station with fittings rack Screw feed unit S 330 Milling unit FE 330 for milling out the lock case Djdpfx Aoyk Rv Aenqjkp Hardware punching unit BS 330 with stop system for central and consistent handle position Olive drilling unit GOB 330 with hydropneumatic feed including accessories for spindle size adjustment

Year of construction: 2010, condition: ready for operation (used), A Silex continuous baking and deep-frying oven is available. Production capacity: approx. 1000 portions/h, processes: frying/baking, output: 20kW, machine dimensions X/Y/Z: approx. 4100mm/1200mm/1700mm, weight: approx. 900kg. Documentation available. On-site inspection is possible. Dksdpfx Ajuzx Uuonqop

Condition: like new (used), Year of construction: 2009, Stop system with handwheel and optical decimal display via magnifying glass, 3,000 mm measuring length Dksdpfjw Suzxox Anqjp as new / showroom piece The TOPROL-3 stop system is a convenient length measurement system. The system has been developed for use on aluminum circular saws. The readout is provided via a measuring tape with a magnifying glass. Length is set manually using a hand crank, and the stop carriage is manually clamped. The system comes complete with roller conveyor (plastic rollers) and has a standard measuring length of 3 meters. - Specific information: • Mounting on the "right" side of the machine, measurement increases from "left" to "right" • Total length 3,650 mm • Support width 190 mm • Travel distance 3,000 mm • Number of rollers: 7 support rollers and 7 vertical rollers • Weight: 65 kg - Technical details: • Precise length adjustment thanks to magnifying glass • Plastic rollers ø 50 mm, width 190 mm • Vertical rollers ø 50 mm, height 140 mm • Load capacity up to 70 kg per meter • Positioning accuracy +/- 0.1 mm • Manual clamping • Support height from 940 to 1,050 mm • Stop arm can be folded up manually

Year of construction: 2015, condition: excellent (used), Used stop system with handwheel and digital display, 3,000 mm measuring length Lightly used, top condition The TMDG stop system is an efficient and convenient length measuring system. The system was specifically developed for use with our aluminium circular saws. The measurement is displayed via an easy-to-read display. The length is set manually using a handwheel, and the stop carriage is clamped manually. The system comes complete with a roller conveyor (plastic rollers)! - Specific information: • Mounted "left" on the machine, measurements increasing from "right" to "left". • Total length: 3,500 mm • Support width: 300 mm • Travel distance: 3,000 mm • Number of rollers: 11 pcs • Weight: 95 kg • Heavy-duty support feet - Technical data: • Plastic rollers, ø 40 mm, width 300 mm Dksdpfx Ajw Suxdsnqsp • Load capacity: up to 70 kg per meter • Positioning accuracy: +/- 0.1 mm • Support height adjustable from 800 to 1,050 mm • User-friendly control panel • Stop arm can be manually folded up • Length measurement via electronic magnetic tape

Condition: new, Year of construction: 2024, Stock items available for immediate delivery consisting of: ᐳ Stop rail, 3 m long ᐳ 2 complete stop units Dkedpfjfnp Swsx Anqop ᐳ 1 measuring scale, right to left ᐳ 1 measuring scale, left to right ᐳ Fastening screws - The wooden base strip, 50 x 45 mm, onto which the stop rail is screwed, is not included in the scope of delivery.

Condition: excellent (used), Year of construction: 2009, Marel scale. Type - START/STOP Scale. Year of manufacture - 2009. Conveyor dimensions - Length - 85cm. Width - 60cm. Height - 90cm. / adjustable height. Dsdpfx Anoh Nvd Hsqokp 3 pcs. in stock. Price is per piece. DANP.20.