Used Strand Pelletizer for sale (427)

Condition: used, operating hours: 30,374 h, functionality: fully functional, machine/vehicle number: 000-0059085/3, overall weight: 997 kg, volume flow: 209 m³/h, power: 113.9 kW (154.86 HP), heating capacity: 99 kW (134.60 HP), smoke pipe connection diameter: 200 mm, nominal heat output: 113.9 kW (154.86 HP), space requirement length: 3,140 mm, space requirement height: 2,400 mm, space requirement width: 2,170 mm, temperature: 90 °C, total height: 2,310 mm, total length: 2,040 mm, total width: 860 mm, type of input current: three-phase, exhaust gas temperature (max.): 160 °C, input voltage: 400 V, negative pressure: 15 Pa, nominal power: 99 kW (134.60 HP), tank capacity: 10 l, input current: 13 A, operating pressure: 3 bar, Equipment: documentation/manual, hot water, KWB UNIT USV100 / Multifire – 99 kW biomass boiler Used Austrian boiler with KWB Comfort 3 controls, output modulation, lambda and negative-pressure control, automatic heat exchanger cleaning and ash extraction. Technical data: - Nominal heat output: 99 kW - Minimum output: 27.6 kW - Fuel input: 113.9 kW Tjdpjzhh Iijfx Airjd - Water capacity: 167 litres - Maximum operating pressure: 3.5 bar - Maximum temperature: 90 degrees C - Weight: approximately 997 kg - Flue connection: 200 mm - Operating hours: 30374 h Data plate specifies 6 mm wood pellets. Wood chip operation depends on the installed extraction and conveying equipment. Exact equipment and scope of delivery by arrangement. Located in Mosonmagyaróvár, Hungary. Inspection by appointment. Transport, installation and commissioning by the buyer.

Year of construction: 2025, operating hours: 2 h, condition: new, functionality: fully functional, Pelletizing plant for a wide range of materials such as wood, miscanthus, agricultural by-products and waste (hay, straw, corn stover, etc.), animal feed, and more. This is a complete compact system, built on a base frame, consisting of the following components: - Raw material storage hopper (4 m³) with agitator - Hammer mill, 22 kW drive power, for size reduction of raw materials (e.g., wood chips) Tedpfx Aioxlif Rorjd - Inclined mixer for raw material, including level sensors and fully automatic moisture dosing - Dosing hopper for pelletizing aids (e.g., corn starch) - Dosing screw for optimal material feed to the press (speed-controlled) - Pellet press with 30 kW drive power, featuring a horizontal ring die, discharge chute, temperature monitoring, overload protection, and more - Conveyor belt for pellet discharge, drop height approx. 2.5 m - Drum screen for dedusting and cooling of pellets The entire plant is centrally operated via Siemens PLC with touch display! All parameters are continuously monitored, and the plant will automatically shut down in case of malfunction! The system is designed and prepared for operation with a second press! Price excl. VAT! !!!!! Attention!! We are continuously looking for sales and service partners (worldwide) !!!!!

Condition: used, Granulation and packaging line. Model: HM700E PRO 11KW Year of manufacture: 2022 It includes: Hammer mill - shredder Chip mixer Chip feeder Granulator Vibrating table Product feed belt (conveyor belt) Pellet hopper with packaging equipment Bag sealer and chip moisture meter Hammer mill with cyclone Motor: 11 kW / 400 V Productivity: 300 - 700 kg / h Weight: 360 kg Soft start installed Cutting system 16 hammers Tedpfx Aisxcy D Eersd Chip mixer: Volume: 1.0 m³ Chip feeder: Motor: 3.3 kW / 380V Feeds up to 800kg / h Granulator: Motor: 22 kW / 380V/50hz; Productivity: 300 - 700 kg/h Weight: 590kg Soft start installed Vibrating table: Weight 90kg Product feed belt (conveyor belt): Dimensions: 5m × 0.4m. Automated packaging equipment: Dimensions: 1, 90x2, 50x2, 30 Volume: 1.5m³ Packing in bags: 1 - 50kg Equipped with two types of scales Bag sealer 220V Moisture meter

Year of construction: 2014, condition: excellent (used), functionality: fully functional, We offer this pellet production line from STOZA s.r.o., in very good condition, year of manufacture 2014. Manufacturer: STOZA s.r.o. Year of manufacture: 2014 Condition: very good Category ID: 659 Todpfx Aisy Ah Nfsred Type: Pellet production line If you have any questions or need further information, please feel free to send us a message or call us.

Year of construction: 2024, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 04344, BRAND NEW Leistritz ZSE Maxx Series (27 / 40 / 50) – 48 L/D – 0 Hours – Factory Wrapped! Technical Specifications Manufacturer: Leistritz Extrusionstechnik GmbH Models Available: ZSE 50 Maxx ZSE 40 Maxx ZSE 27 Maxx Year of Manufacture: 2024 Condition: 100% Brand New (Zero operating hours, completely unused, still in original factory packaging/wrapping) L/D Ratio: 48 L/D (All units upgraded directly by Leistritz with brand-new complete barrel sets and new shafts) All machines are with side feeders. Description Available for immediate individual or package sale: Three (3) pristine, 2024 Leistritz ZSE Maxx Twin-Screw Extruders (Models: ZSE 50 Maxx, ZSE 40 Maxx, and ZSE 27 Maxx). These machines were originally dedicated laboratory units held by Leistritz. To meet high-specification production requirements, Leistritz directly upgraded all three machines to a 48 L/D ratio. These OEM upgrades included a brand-new, complete barrel set and brand-new shafts installed entirely by the factory. All three machines are in 100% brand-new condition with zero (0) operating hours. They remain fully wrapped and packed in their original factory delivery boxes—they have never been opened, touched, or commissioned since arriving from Leistritz. Each machine is a complete, turnkey system supplied with its own high-end feeding setup, control architecture, and an extensive array of genuine auxiliary tools and spare parts. Scope of Delivery & Included Accessories (Per Machine) Feeding & Extrusion Setup Volumetric Feeder & Side Feeder (with dedicated side feeder trolley) Feed Ports Downstream & Die Attachments Strand Die Head, Die Plates, & Screen Carrier Plates Control & Electrical System Full Control Cabinet (including the Macrometer integrated into the operational panel) Complete set of Connection Cables & Cables for the Main Drive Comprehensive Spare Parts Kit for the control cabinet Vacuum & Degassing System Spare set of Screw Vacuum Pumps, Vacuum Hoses, & Vacuum Gauges Vacuum Pump Heating/Cooling Systems & Connection Hoses Sensors, Maintenance & Installation Melt Temperature & Melt Pressure Sensors Screw Mounting Device, Screw Extractors, & Cleaning Brushes Lifting Rods, Leveling Elements, & Corrosion Inhibitors Listing Summary for Buyers Available Models: ZSE 27 Maxx, ZSE 40 Maxx, ZSE 50 Maxx. Immediate Availability: Skip the massive factory lead times for a brand-new Leistritz line. Tsdsy Ufk Rjpfx Airjd OEM Guaranteed: All modifications and extensions to 48 L/D were performed officially by Leistritz. Pricing available for individual machines or as a complete 3-machine package. Photos of the packed crates and original documentation are available upon request.

Condition: used, Year of construction: 1994, operating hours: 392 h, functionality: limited functionality, machine/vehicle number: 1115, type of input current: three-phase, total height: 150 mm, total length: 2,200 mm, total width: 900 mm, overall weight: 1,800 kg, power: 11 kW (14.96 HP), input voltage: 380 V, Equipment: documentation/manual, Brand: Pawert Tedjzyau Eepfx Airsd Type: I-40/85 Year of construction: 1994 Capacity: 150 kg/hour Briquette dimensions: Ø 40 mm Motor: 11 kW Weight: 1800 Including feed screw and discharge chute.

Condition: used, Year of construction: 2022, functionality: unexamined, 23 complete containerised pellet boiler houses for sale – 13 × Ba-120 (120 kW) and 10 × Pereko KSR 130 (130 kW), 2.86 MW in total. Price is per unit; volume pricing for 5+ units and for the complete lot of 23. Each unit is a self-contained mobile heat plant: boiler, burners, buffer tanks, plate heat exchanger, flue system and 12 m³ pellet silo in one insulated heavy-duty container. Crane it in, connect flow/return, heat on – no boiler room, no construction. BOILER - Ba-120: 120 kW, 70/90 °C, heats approx. 2,180 m² / 5,450 m³ - Pereko KSR 130: 130 kW, 57/95 °C, heats approx. 2,360 m² / 5,900 m³ Tjdez Iy Ilepfx Aired - Both: 2 × ECOMAT 70 pellet burners (agro pellets / sunflower husk capable, up to 98 % combustion efficiency), turbulators in fire-tube heat exchanger, max. 1.5 bar, flue 300×300 mm, G3 connection, 230 V / 500 W, power modulation 90 % - EN 303-5:2012 (MSZ EN 303-5:2013) STANDARD PACKAGE (every unit) - Heat buffer: 2 × 1,000 L insulated (Hajdu PT1000) - Expansion: 3 × 200 L pressure vessels - Heat exchanger: APV / SPX TR1-MV-16I/2 plate HX, 140 kW, 10 bar - Flue: hot-gas induced-draught fan 450 m³/h / 800 Pa, vortex-tube cyclone separator (92 %), insulated acid-resistant modular chimney, draught monitoring - Fuel: 12 m³ external double-insulated pellet silo + screw feeder to internal day hopper - Ash: Ø100 mm geared ash screw to closed external bin - Controls: manual / automatic mode, control cabinet with PC, remote monitoring & fault alerts via internet, heat meter - Container: 6 × 2.5 × 2.5 m internal, PIR sandwich panels U = 0.4 W/m²K, 6 t steel floor, crane lugs, security lock, 0.9 × 2.1 m door CONDITION Pre-owned, complete, in storage since 2022. Sold as is, where is. Inspection by appointment in Hungary. Transport and recommissioning can be arranged. Ideal for schools, clinics, municipal buildings, farms, greenhouses, worker camps and emergency / temporary district heating. Full technical documentation in English and Ukrainian available on request.

Condition: used, functionality: fully functional, Year of construction: 2015, Palletizer and pallet wrapper Capacity 100 kg / h Used, no warranty This machine is located in Tata, Hungary. What is Pellet? Pellets are a natural biofuel made from made from agricultural and forestry wastes, such as dried sawdust, compressed into small cylinders with a diameter of a few millimetres. It possible to obtain a compact product with no additives and chemicals. Benefits of pellets? Todpfotw Szaex Aired Among the most important advantages: environmental sustainability (reduction of deforestation and GHG emissions); cheap to produce and affordable to buy. And, due to the pressing process, the calorific value of pellets is approximately double that of wood for the same volume.

Condition: used, SPE Renergi Low Temperature Dryer. The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels. The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C. Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur. Power supply Data: • Voltage 400 V AC, three phase • Recommended fuses in supply line: maximum 3x630 A • Typical power consumption: 200kW The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet). Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h. Airflow: max 200 liter/min Air pressure: min 4,5 bar, recommended 6,0-8,0 bar Water supply: hot water supply, with a flow of 32 dm3/s. Water pressure: min 1.5 bar, max 6.0 bar Operating temperature range: • Incoming air temperature: -20°C to 50°C • Relative humidity: 0% to 60% Raw material/media: • Relative humidity: 45% to 55% by wieght • Requested relative humidity: 8% to 15% in the dried material Capacity: • The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load • The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour. SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of: • The Machinery Directive 2006/42/EC • LVD 2006/95/EC • EMC 2004/108/EC The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time. The dryer is already dismantled All electrical schematics, manual, operating instructions available Upon request, we can provide a contact person with this type of working dryer for consultation Price: 35 000 EUR (VAT is not included) Tsdszvq Rcspfx Airsd

Condition: used, operating hours: 500 h, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, Turn fine-grained biomass into uniform pellets with a complete pelletizing system: pellet press, material bunker, drum sieve with conveyor belt and big-bag handling, all from one manufacturer. This EcoKraft RP22 system is built around the second-generation RP22 press, developed for fine-grained biomass. It has built-in steam extraction from the pressing chamber and two central lubrication points, which keeps it compact and easy to operate. Only one system available. This is a single used system, not ongoing stock. Once sold, it is gone. Pickup and transport slots are limited (press alone: 650 kg). Best for: pelletizing fine-grained biomass (for example fertiliser, wood or plant-fibre mixes) indoors, protected from the weather, with 400 V three-phase power. Not suitable for: outdoor use, unattended operation, or explosion-risk areas (no explosion protection is included as standard). What the equipment means in practice: RP22 GEN2 press, max. 22 kW: powerful press for fine material, with steam extraction from the pressing chamber Bunker 1 m³ with screw discharge and level sensor: the sensor sends a start/stop signal that controls filling of the press Vibration pads on compressed air: help prevent material bridging in the bunker Drum sieve with conveyor belt: screens out fines and collects them in a big bag Complete package (as supplied by EcoKraft AG): • Pellet press RP22 with automatic central lubrication • Pneumatic grease system for 18 kg buckets with 18 kg food-grade grease bucket • Digital water dosing pump 54 l/h • Die 6x20 mm, 45° pre-compression • Material bunker 1 m³ with screw discharge, level sensor and vibration pads • Drum sieve with conveyor belt 6mm sive + 4 mm sive • Big-bag racks: 1x Vario 1.0 and 3x Vario 1.5 (stackable) • Big bags: 1x 90x90x110 cm and 5x 95x95x150 cm Technical data: Tsdpfx Asz Rwimjirsd Press: 1.70 x 0.80 x 1.70 m, 650 kg, max. 22 kW, 63 A CEE plug (50 A upstream fuse required), customs tariff no. 84793010 Drum sieve: Ø300 x 1200 mm, height adjustable, side feed left or right, max. discharge height 1800 mm Conveyor: length 3600 mm, discharge height 2600 mm, belt width 150 mm, 49 cleats, 0.75 kW Manufacturer: EcoKraft AG, Germany, with manufacturer CE declaration Condition: used. Bought second hand in like-new condition, then used by us for approx. 500 operating hours. The bunker is a demo unit with light signs of use. Location: 6064 Kerns (self pick-up, transport by arrangement). Price: EUR 70,000. Why you can buy with confidence: approx. 500 operating hours in our own use, complete scope as listed, manufacturer documentation available, in-person inspection in Kerns by appointment. Inspect and test before you buy: you may verify identity, condition, completeness and operation at inspection or pickup. We guarantee what we control: the system is what this listing says it is, complete and functional when you see it. We do not promise throughput or pellet quality for your material, which is why we ask about your application first. Speed bonus: buy by October 27, 2026 and receive EUR 2,000 off, so EUR 68,000 instead of EUR 70,000. Valid until October 27, 2026, or until the system is sold. Action: send us your material, required capacity and destination. We will confirm suitability and provide a transport estimate.

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: 9825, The 2024 general overhaul includes, among other things, the die head, hydraulic nut, bearings, main shaft, oil pump with filter, and synthetic oil. Only the steel housing is older but is in excellent condition. The images of the production line in the hall date from before the overhaul. The individual images of the Amandus Kahl pellet press show the condition after the overhaul. TECHNICAL DETAILS Motor power: 110 kW Sawdust capacity: 2.5 – 3 t/h Biomass capacity: 3 t/h Bran capacity: 3.5 – 4 t/h Straw capacity: 2 – 2.5 t/h L/D ratio: 3.67:1 MACHINE DETAILS Tjdezaricspfx Airjd Dimensions of press (W x H): 1,450 x 1,900 mm Diameter of press: 2750 mm Insertion depth: 6 mm Press length: 22 mm Year of manufacture of motor: 2024 Year of manufacture of cooler with sieve: 2015 Year of manufacture of conveyor belt: 2015 Year of manufacture of feed screw: 2015 EQUIPMENT Amandus Kahl C35-780 pellet press with base plate New 110 kW electric motor Electric control cabinet with emergency stop Complete electrical documentation Conveyor belt Sieve system with automatic cooling Hydraulic nut Die head Electrical wiring Metering screw for product feed Automatic metering system for filling 4 additional dies, 6 mm 60 liters of additional synthetic oil 7 new bearings 2 new wear rings 1 new air filter 2 new oil seals 1 new oil filter 1 new oil pump 20 liters of 800/460 synthetic oil 1 new thrust piece (main shaft) Documentation of overhauled and renewed parts

Year of construction: 2026, condition: new, PLN-75 Mini Film Waste Pelletizing Line with Air Cooling The Mini Film Waste Pelletizing Line is designed for recycling low-bulk-density polymer waste at relatively low production capacities. It is a compact solution for processing film production waste and other lightweight plastic materials into reusable pellets. The system can process plastic film in either shredded or non-shredded form, depending on the type and condition of the material. 1. Output Range: 30~50Kg/hour 2. Standard Electricity:380V/3 Phases/50 Hz 3. Main Motor Power: 15 кW 4. Total Power: 29 кW 5. Screw Diameter. : 75 mm 6. Filter: Dual stations manual filter 7. Cooling Method: air cooled 8. Material feeder pusher: equiped Tedsz Nlfmopfx Aired 9. Application: LDPE, HDPE,LLDPE pelletizing, scraps or rolls

Condition: used, Year of construction: 1985, functionality: fully functional, For sale: granulator from the renowned manufacturer Buhler. Granulator model: DPAA-660 Motor power: 160 kW – option to install a more powerful motor – 200 kW. Die diameter: 660 mm, Tjdpfew Uh Nzex Airod Die working width: 160 mm, Granulator output on straw / sawdust: 2 – 2.5 t/h The granulator is currently dismantled. For a committed buyer, we will assemble it using new wear parts. Contact for more photos and details. Machine available for inspection in Sępólnie Krajeńskie, Kuyavian-Pomeranian Voivodeship, Poland.

Year of construction: 2014, condition: excellent (used), functionality: fully functional, RECYCLING PELLETIZING EXTRUSION LINE – BEIER 2014 / EKOCHEM – 2023 – with autostart heating - Belt conveyor with amperes load control - Agglomerator – 75 kw with cooling blower and auto water spray system - Main engine extruder – 110 kw - Double degassing MELT LASER FILTER SYSTEM – HOP 400 – Ekochem – 2023 - with autostart heating - with cooling pump Todpfx Aijuac Ugerjd - laser filter spare parts: 1 set 200 microns, 1 set 250 microns, 2 sets 300 microns, 2 blades PELLETIZER – RW-440 – Ekochem – 2023 - with new Ekochem die head water pump - with PE and PP die head - with air compressor and custom die head blades – 48 h/set change - Centrifuges - Vibrator - Heated Silo + weight system - Capacity: PP( 400 – 500 kg/h) / PE( 500 – 600 kg/h )

Condition: reconditioned (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 26/2632, power: 180 kW (244.73 HP), input voltage: 380 V, warranty duration: 12 months, Equipment: documentation/manual, 1. Pelletizing press, brand: Paladin 1600-210 Internal diameter of the die: 850 mm Die surface: 210 mm The press is equipped with 2 motors, each with 90 kW and a speed of 1500 rpm. The press door is made of stainless steel and has an overload valve. 2. Roll press with 2 rolls on the press, refurbished with a drilled or ribbed design. The press is complete with a die lifting device and tools. New rear plate for the 2 rolls. The press has been completely refurbished and fitted with new bearings and wear parts, such as front and rear sliders, die adjustment ring, etc. Todpfx Aioq U R N Torsd Also includes new V-belts and toothed belt. All safety features will be taken into account, and appropriate switches will be installed. Friction protection, door switch, and inspection hatches will be mounted. Refurbished pump unit for friction and V-belt tension. Note: Conditioner on the press is an optional extra.

Condition: used, Münch RMP 660 pellet press for the production of wood pellets and biomass pellets from sawdust, wood shavings and other organic waste materials. The machine is suitable for industrial pellet production, offering high pressing capacity and consistent pellet quality. Ideal for wood processors, sawmills and biomass plants. Technical data: - Screen: 6 mm - Motor: 2 x 90 kW Tjdpfx Aiozryyrsrsd - Inner diameter of die: approx. 660 mm - Number of press rollers: 2 - Pressing capacity: up to approx. 3–5 t/h

Year of construction: 2011, condition: excellent (used), functionality: unexamined, machine/vehicle number: 24, For sale: Mixer – Raw material mixer from a pellet production line. Thanks to the mixer, the raw material fed into the pelletizers is homogeneous. Capacity of the line in which the mixer was used: approximately 8 tons/hour. Mixer dimensions: External length: 6150 mm, External width: 1760 mm, External height: 2740 mm, Internal length: 5000 mm, Internal width: 1490 mm, Internal height: 1750 mm, Rib diameter: approximately 1400 mm, 22 kW motor, Mixer price: 23,000 Euros, We offer a bag filter for the mixer, visible in the photos of the production line. Filter price: 7,000 Euros, Todowxatbspfx Aired The machine can be viewed in: Sępólno Krajeńskie, Kuyavian-Pomeranian Voivodeship, Poland.

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 1877, cutting height (max.): 300 mm, total length: 18,500 mm, total height: 2,550 mm, cutting width (max.): 450 mm, total width: 2,400 mm, control cabinet width: 400 mm, saw blade diameter: 735 mm, overall weight: 11,000 kg, control cabinet length: 1,600 mm, control cabinet height: 2,400 mm, power: 15 kW (20.39 HP), type of input current: three-phase, Equipment: safety light barrier, Submitting a bid obligates the bidder to collect the equipment on time, no later than week 46. TECHNICAL DETAILS Machining Area Cross-section: 20 × 60 to 300 × 450 mm Material Feed Infeed cross conveyor: 7 strands Conveyor length: 2.2 m Saw Unit Saw: Undercutting swiveling miter saw Milling Units Milling unit: Universal milling machine Tools for universal milling machine: Roller cutters and finger cutters Vertical Combination Support Drilling units: 1 unit Finger cutter: 1 unit Horizontal Combination Support Drilling units: 2 units Grooving tool: 1 unit Workpiece Handling Beam turning station: fully automatic Foundation and Installation Minimum floor slab thickness: 10 cm Floor slab requirements: level, sufficiently reinforced, and suitable for anchoring Electrical Data Voltage: 400/230 V, 3/N/PE Fuse rating: 3 × 63 A Frequency: 50 Hz Peak demand: 15 kW Compressed Air Supply Volume flow: max. 600 l/min Operating pressure: 8.5 bar Permissible pressure: max. 10 bar Control System Retrofitting: Fall 2020 by Hundegger Control system: CAN bus control Previous control system: MIPPS EQUIPMENT Infeed cross conveyor with 7 strands Undercutting swiveling miter saw Universal milling machine Roller cutters Finger cutters Combination support for vertically operating tools Drilling unit, vertical Tedj Aayqwopfx Airsd Finger cutter, vertical Combination support for horizontally operating tools 1 drilling unit, horizontal Grooving tool, horizontal Fully automatic beam turning station

Condition: used, Year of construction: 2003, functionality: fully functional, type of input current: three-phase, overall weight: 10,000 kg, power: 264 kW (358.94 HP), input voltage: 400 V, 2 used Salmatec presses, type Maxima 840/125 LF Suitable for compressing sawdust, with forced feed. Tjdpfx Aoz I Tzxoirod The presses are equipped with an automatic grease lubrication system for the rollers and main shaft bearings. In addition, there is a lifting beam on the press for changing rollers and dies. The motors are 132 kW and of the Hoyer brand, manufactured in 2016, IE3 efficiency class. The presses have always been maintained by Salmatec and have recently been fitted with refurbished rotors. Several rollers and dies are included with the presses. Interested or would you like more information? Please feel free to contact us for specifications, photos, and price.

Condition: refurbished (used), Year of construction: 2026, Pellet Press for Sale Manufacturer - General Dies Engine Power - 200 Kw Tjdozq E Avopfx Aired Capacity - 2,2 t/h Year - 2014 / 2026 Reconditioned

Condition: used, Ražotājs: Munch Modelis: 420 Ražîba: 1 tonna stundā Elektrojauda: 2x75 kW Diametrs 420 mm Komplektā ar dzesētāju pēc kapitālā remonta clear 134 / 5,000 Translation results Translation result Manufacturer: Munch Model: 420 Production: 1 ton per hour Electric power: 2x75 kW Diameter 420 mm Complete with cooler after overhaul Tjdpfx Aiowfqn Aerjd

Condition: refurbished (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 305.537.1992, warranty duration: 12 months, Le Meccanica CLM630ST 630/150 die and rolls Force Feeder with a 0.9KW motor Currently undergoing full refurbishment - Seals &bearings included Colour - customers option Tjdpfx Aiev Sq Rlerod Customer to arrange collection and freight

Condition: used, Year of construction: 2007, functionality: fully functional, power: 100 kW (135.96 HP), heating capacity: 100 kW (135.96 HP), nominal heat output: 100 kW (135.96 HP), nominal power: 100 kW (135.96 HP), tank capacity: 5,000 l, We are offering this used HDG Bavaria 100kW heating system with articulated arm discharge, manufactured in 2007. Manufacturer: HDG Bavaria Model: 100kW with articulated arm discharge Year of manufacture: 2007 Tedpfx Aijyrhd Terjd If you have any questions or require further information, please feel free to send us a message or give us a call. The system is currently still in operation and can be inspected. The offer includes a 5,000L buffer tank, control unit, and various spare parts (which we have kept in stock as a precaution).

Condition: excellent (used), Year of construction: 2010, 153 USED PWSB Bakery Oven, Wood-Fired, Pellet-Fired. Year of manufacture: 2010. TECHNICAL DATA: - Number of chambers: 3, - Ceramic-lined baking chamber, - 6 pellet burners (2 per baking chamber). EXTERNAL DIMENSIONS (in cm) - Width: 300, - Depth: 400 (including burners) - Height: 290, Pellet hopper: - Capacity: approx. 8-10 tons, - Height: 700, - Diameter: 270 cm. CHAMBER DIMENSIONS (in cm) - Width: 180, - Depth: 200. We offer devices in various technical conditions and prices: 1. Directly from the bakery. 2. After inspection with a commissioning warranty. 3. After renovation with a 6-12 month warranty. The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: renovation / transport / assembly / commissioning of the device. The price is a net price per 1 pcs. Tsdpfx Aijxfkx Eersd Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, batch oven, shelf oven, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: excellent (used), KWB Powerfire TDS 150 – automatic biomass boiler Used Austrian wood chip and pellet boiler with modulating output from 45 to 150 kW, suitable for commercial, agricultural and industrial heating. Key features: - Moving grate combustion - Lambda-controlled combustion and cyclone combustion chamber - Automatic heat exchanger cleaning - Automatic ash extraction - Wood chips G30/G50 or pellets Factory specifications: - Nominal output: 150 kW - Minimum output: 45 kW - Maximum operating pressure: 3.5 bar - Maximum supply temperature: 90 degrees C - Water capacity: 300 litres - Efficiency with wood chips: 90.4 percent at nominal load In stock. Inspection by appointment. Please confirm the exact scope of delivery and accessories before purchase. Transport and installation by separate arrangement. Tedjzqnp Sjpfx Airjd We also offer wood chip boilers, pellet boilers, wood gasification boilers, feeders, pumps, buffer tanks and heating accessories.