Used Studer S 40 for sale (65)

Condition: used, TECHNICAL DETAILS - distance between centers : 1000 [mm] - centers height : 175 [mm] - strokes (Z/X) : 1050 x 275 [mm] - max. feeds (Z/X) : 10 x 5 [m/min] - grinding wheelhead type : 2 external, 1 internal - left external grinding wheel dimension : 500 x 63 x 127 [mm] - right grinding wheel dimension : 400 x 63 x 127 [mm] - grinding wheel motor power : 7,5 [kW] - rotation speed : 1670 - 2110 [Rpm] - grinding wheelhead orientation : -15 to +225 [°] - resolution : 0.001 [°] - workhead tapper : MT5 - workhead rotation speed : 1 - 1027 [Rpm] - workhead power : 0,785 [kW] - tail stock : MT3 - quill stroke : 35 [mm] - weight : 7000 [kg] - hours under power : 47.959 [h] EQUIPMENT - control CNC FANUC 16 TB - programming through Pictogramming - Release B version B275 - deported electronic handwheel - 2 grinding wheels left-right internal at 180 [°] - B axis for indexing of the grinding wheelhead every 0,001 [°] - high precision C axis for part indexing and form grinding - tail stock with fine concentricity adjustment - sensitron - upper table swiveling fine adjustment - control pedal Isdpfsuhbyqsx Aqqoba - lenght positioning device MARPOSS E32R with sensor T25G - measuring scales HEIDENHAIN on X/Z - coolant tank with pump - 1 grinding wheel holder flange - 1 grinding wheel - 1 dry center - 1 electro-spindle : 40.000 [Rpm] - tail stock hydraulic retract through pedal

Condition: used, Year of construction: 1987, machine/vehicle number: 6004.01, grinding diameter:350 mm grinding length:1000 mm centre height:175 mm workpiece weight:120 kg power capacity:5,5 kW turning speeds:max. 25000 U/min control:FMS 5-88 weight of the machine ca.:3,5 t precision grinding machine with SONY digital display, coolant system, electronic hand wheel, Ijdpfx Asdmppqjqqsba separate electrical cabinet, emergency cut-off

Condition: like new (used), Year of construction: 1995, functionality: fully functional, center height: 225 mm, workpiece weight (max.): 100 kg, grinding length: 1,600 mm, CNC cylindrical grinding machine STUDER S40, year of manufacture 1995. The machine is in good used condition. Technical data: • Control: Fanuc Series 16-GC • Required space approx. (Height/Length/Width): 250 cm / 650 cm / 320 cm Axes: • Distance between centers: 1,600 mm • Center height: 225 mm • 4 axes (X, Z, B, C) • Max. workpiece weight approx.: 100 kg Equipment: • 2 grinding wheels + 1 internal grinding stone (selectable via control) • Face, plunge, internal, and cylindrical grinding • Magnetic chuck, three-jaw chuck, collets, between-centers grinding • Automatic dressing device • Steady rest • Resolution: 0.0001 mm Ijdpfet N Ivcjx Aqqeba • Polygon grinding • Static balancing unit • Grinding wheels available in corundum, diamond, and CBN • Cycle control • DXF import possible

Condition: as good as new (ex-display), Year of construction: 2025, Studer S40 1000/1600 Grinding length: 1,000/1,600 mm Center height: 175 mm (optionally more) Workpiece weight: 120 kg Additional freely selectable options: - Completely new control cabinet with Siemens Sinumerik One or Fanuc 0iTF-Plus control - Quick setup via GSN user interface - B-axis freely positionable - Second external grinding wheel Ijdpfjfg S Uajx Aqqeba - Internal grinding unit - Center height adjustment - Dressing spindle for diamond dressing roll - Balancing and finishing sensor - Hydraulic clamping/releasing of the tailstock - Automatic Siemens door drive - 19" / 22" screen - Remote maintenance - Conversion to needle nozzles - Matching coolant/extraction system - Automation preparation - and much more We would also be happy to overhaul your existing machine! Schaudt / Studer / Kellenberger / Bahmüller / Voumard / Overbeck / Fortuna / Tacchella and others.

Condition: used, Year of construction: 1999, functionality: limited functionality, CNC Cylindrical Grinding Machine for Sale – STUDER S40 (1999) We offer for sale a STUDER S40 cylindrical grinding machine, year of manufacture 1999. The machine is in working condition. It is equipped with one grinding spindle and a turret wheelhead suitable for both external and internal grinding operations, making it a versatile solution for precision machining. Ibodpey Elz Defx Aqqsa Control system: FANUC 16 Key Features: External and internal grinding capability Turret wheelhead Reliable FANUC 16 control system Solid and proven STUDER build quality Operator manual. Delivery Terms: EXW (Ex Works) The machine is available for inspection upon request. For more information, photos, or pricing, please get in touch.

Condition: used, Year of construction: 1982, grinding diameter:250 mm grinding length:650 mm centre height:125 mm internal grinding spindle rev.-stepless:9500-50000 U/min workpiece speeds -stepless:50-10000 mm/min grinding head swivelling:90 Grad max. dia. of grinding wheel:400 mm spindle bore:30 mm grinding length - plunge feed:80 (100) mm max. grinding depth by internal grinding:ca. 170 mm max. bore diameter to be ground:90 mm feed speeds:240 mm/min max. workpiece weight:80 kg required cooling water:36 l/min centre distance:650 mm distance of workpiece spindle-taper cone:960 mm drive capacity - spindle motor:6,25 kW Ibedpfxscxxubs Aqqsa connected load:ca. 10 kW total power requirement:8,5 kW weight of the machine ca.:3,4 t dimensions of the machine ca.:3,9 x 2,5 x 1,85 m with Studer control, electric/hydraulic drive, variable speed, tailstock with fine adjustment and hydraulic back feed, work piece headstock with increased precision, table air , hydraulic removable dressing device, radius-dressing device, Hydro-Cyclone filter, automatic grinding wheel-balancing device, automatic dressing cycle with speed compensation

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 011.257.90.043, center height: 175 mm, center width: 1,000 mm, controller manufacturer: Fanuc, TECHNICAL DETAILS Maximum turning height: 175 mm Maximum turning diameter: 1,000 mm Longitudinal slide Maximum longitudinal slide travel: 1,050 mm Iodpfx Ajzb Hxneqqjba Cutting speed (vt): 0.0001–10,000 mm/min Resolution: 0.0001 mm Table tilt: max. 8.5° Cross slide Maximum cross slide travel: 275 mm Cutting speed (vt): 0.0001–10,000 mm/min Resolution: 0.0001 mm MACHINE DETAILS Control system manufacturer: Fanuc EQUIPMENT - Internal grinding attachment

Condition: good (used), cylindrical grinding machine Iodjtrgndjpfx Aqqeba

Condition: used, Year of construction: 1991, functionality: fully functional, machine/vehicle number: 7360.32, Machine: Studer S40-4 Serial number: 7360.32 Year of manufacture: 1991 Control: Sinumerik System 3 Power supply: 22 kVA Ibjdpfxsyilirs Aqqea

Condition: used, TECHNICAL DETAILS - centers height : 100 [mm] - distance between centers : 650 [mm] - length of internal grinding : 100 [mm] - Ø of internal grinding : 3 to 40 [mm] - maximal table orientation : 30 [°] - workhead : * spindle speed (variator) : 60-1200 [Rpm] * motor power : 0.5 [kW] * interior cone : morse 4/2 - wheels sizes : 350 x 30 x 127 [mm] - wheelhead : * power : 3 [kW] * orientation : 15/30 [°] - maxi part weight : 20 [kg] - maxi power required : 5 [kW] WEIGHT & DIMENSIONS - Machine floor space : 3000 x 1400 [mm] - Machine height : 1600 [mm] - Machine weight : 1900 [kg] EQUIPMENT - complete internal grinding attachment : 45.000 [rpm] - 1 complete cooling device - 1 counter headstock with fine adjustment - 1 reversible and adjustable trueing device - 1 directional diamond holder Ibsdpfx Aqjuhby Reqsa - 2 axis X, Y digital display - 1 steady rests 3 points

Condition: excellent (used), grinding diameter 155 mm grinding length 400 mm centre height 80 mm Q U O T A T I O N We are pleased to offer you ex our stock, subject to prior sale, and error in technical data : STUDER (CH) Universal Precision Cylindrical Grinding Machine Model S 20-12 Year Height of centers / Grinding Ø 80 / 160 mm Center distance / Grinding length Z-axis 400 / 420 mm Internal Grinding Ø mm Workpiece weight flying / between centers max. 5 / 20 kg Table speeds 0,1 – 3,5 m/min Table way automatic, min. 1 mm Table swivable max. 30 ° Universal Grinding Head cross way max 170 mm Rapid infeed way 30 mm Infeed way 1,9 mm Feeds 0,001 – 0,04 mm/Ø Swivable 10 / 30 ° Grinding wheel dimension : bore x width x Æ 127 x 30 x 300 mm Internal Grinding device separately mounted mm Workhead Fitting taper/conus MK 2 Speeds 60 – 1.200 rpm Spindle drive 2,2 kW Total electric load approx.. 5 kW - 400 V – 50 Hz Weight approx. 1.000 kg Accessories / Special Features: • Electrohydraulic conventional control with PHILIPS Digital Readout for the infeed (x-axis) • Preinstalled automatic cycles for plunge-in grinding, traverse grinding, internal grinding with roughing, finishing, fine-finishing, spark-out • Separately mounted Internal Grinding Device with belt-driven internal grinding spindle • Workhead with Quck-release collet chuck, swivable 90° • (right now the machine is not equipped with a tailstock, an original STUDER tailstock; used can be supplied for approx.. EUR 5.000,--) • Wet grinding equipment with coolant filtration unit, separate electric cabinet, manuals Condition : Very good ! Universal machine for all sorts of grinding tasks ! Ibodozbczxjpfx Aqqsa Video : ! Delivery : immediately available, FCA Metzingen Payment : 100 % Net, before loading

Condition: used, Year of construction: 1992, Technical details: grinding diameter: 50 mm grinding length: 100 mm centre height: 100 mm Ibodpfoy Nk Hyjx Aqqja centre distance: 200 mm

Condition: used, Year of construction: 1989, Technical details: grinding diameter: 300 mm grinding length: 540 mm centre height: 175 mm Iodpfoy Nk Hmsx Aqqoba total power requirement: 20 kVA centre distance: 1000 mm

Year of construction: 1989, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 5117.19, TECHNICAL DETAILS Grinding diameter: 450 mm Grinding length: 1600 mm Center height: 225 mm Control system: Siemens Sinumerik System3 Rotational speed: max. 2440 rpm Center distance: 1750 mm Resolution: 0.001 mm Speed: 0.06 - 10000 mm/min Cross slide: 180 mm Feed rate: 0.01 - 5000 mm/min Iedpolnkfaofx Aqqoba Resolution: 0.0005 mm Workpiece weight: max. 500 kg Tailstock travel: 40 mm Straightness of the outer circumference over 650 mm: 0.004 mm Roundness accuracy: 0.0005 mm MACHINE DETAILS Machine weight: approx. 7.3 t Total connected load: max. 22 kVA

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 119/020.0895, Manufacturing origin CH Voltage 400 V Netweight 4500 kg Custom position 8460.2320 Dimensions 2700x2350x2100 mm TECHNICAL DATA Ibjdelbgfcepfx Aqqoa Control Fanuc 16i-T Center height 175 mm Distance between centers 1000 mm LINEAR AXES Grinding length 500 mm Strokes X : 267 mm Z : 650 mm WHEEL HEADSTOCK Continuous orientation +/- 8.5°. External grinding wheel size 500x80x203 mm Power 7.5 kW Speed 44 m/sec. WORKPIECE HEADSTOCK Taper type MT5 C-axis +/- 5 Power 1 kW Speed 30-1000 min-1 TAILSTOCK Taper type MT3 Sleeve stroke 35 mm Sleeve diameter Ø 50 mm Max. workpiece weight 130 kg POWER SUPPLY Voltage 400V 50 Hz errors and omissions excepted-data given without obligation Fully overhauled: Mechanics, geometry, hydraulics and electrical parts checked and/or replaced. Grinding headstock Disassembly, cleaning of parts, replacement of worn and defective parts, overhaul of motor, replacement of bearings, replacement of belts, disassembly of spindle, replacement of seals and O-Rings + adjustment. New paintwork. Headstock Dismantle, clean parts, replace worn and faulty parts, overhaul motor, replace belts. New spindle bearings. New paintwork. Tailstock Dismantled, checked and overhauled. Hydraulics Dismantle, check motor, replace hoses, defective and worn parts. Check hydraulic block X-axis Dismantle, replace worn parts such as O-Rings, seals, rings etc., overhaul hydraulic piston, grind tables. Z axis Dismantle, grind tables, replace worn and defective parts, overhaul hydraulic piston, new paintwork. Electrical cabinet Complete check, change various relays. Painting Colors: White RAL 9003 and gray RAL 7011 Geometry according to manufacturer's protocol. Inspection and cleaning of various accessories

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, center height: 225 mm, controller model: Fanuc 16T, TECHNICAL DETAILS Centre height: 225 mm MACHINE DETAILS Control: Fanuc 16T Ibjdpfjxlix Dex Aqqea

Condition: good (used), Year of construction: 2000, Universal Cylindrical Grinding Machine Studer S30 leanPRO Studer S 30 Year of manufacture: 2000 Operating hours counter Regular maintenance intervals by manufacturer (last service 11/25, report available) Wheel change: according to manufacturer intervals Hydraulic inspection: annual check Backup battery replacement: included in Studer maintenance Control system: FANUC 16 T Ibodpfxsyx Hgzs Aqqoa Grinding diameter: 350 mm Grinding length: 1000 mm Center height: 125 mm Distance between centers: 650 mm Optional grinding cycles for increased center height Table adjustment: 11° Glass scale on X / Z axis Paper band filter unit Workpiece headstock: approx. 1-1,000 rpm Internal grinding attachment with accessories LED spotlight with flexible arm Grinding wheel: 400x80 mm Frequency converter for external grinding spindle Grinding wheel flange Bore diameter: 127 mm Frequency converter for internal grinding spindle Workpiece weight: approx. 80 kg Workpiece support with live center and MK 4 Workpiece headstock: MK 5 taper Tailstock: MK 3 taper Quill stroke: 40 mm Machine weight: approx. 3,400 kg Installation dimensions (LxW): 2,300x1,550 mm Machine height: approx. 2,000 mm Electrical supply Digital linear measurement system Coolant supply with fleece filter, tank capacity 300L Operating hours counter, control ON: 35,978 h

Condition: excellent (used), Year of construction: 2008, operating hours: 32,109 h, functionality: fully functional, center height in crank: 170 mm, center height: 175 mm, workpiece weight (max.): 80 kg, grinding length: 600 mm, center width: 350 mm, grinding wheel diameter: 500 mm, grinding diameter: 300 mm, distance between centers: 600 mm, workpiece diameter between centers: 300 mm, workpiece length between centers: 600 mm, grinding wheel width: 100 mm, feed rate X-axis: 285 m/min, input voltage: 380 V, TECHNICAL DATA: - Table tilt +8.5° - X-axis travel 285 mm - B-axis travel 800 mm - Angular grinding at 1° at –15° + 195 - Grinding wheel 500x63, 50 m/s - Distance between centres 600 mm, max 80 kg - Chuck B32 - Tailstock quill stroke 63 mm - Fine adjustment of tailstock 0.04 mm - FANUC 21-TB control, 10.4'' - Memory 64 KB - Coolant tank 375l with automatic filter paper feed Isdpfxoy E N Iuj Aqqjba ADDITIONAL EQUIPMENT: - Steady rest ARBOTECH – GR – 055V - MARPOSS measuring device UNIMAR S30 - MARPOSS measuring device P4 - MPM wheel balancing system This S33 grinding machine is additionally equipped with a MARPOSS device for fast and precise measurement of workpieces, an ARBOTECH auxiliary unit for grinding workpieces in a single setup, and a grinding wheel balancing system. The machine has been serviced annually by the manufacturer STUDER. It is highly precise and in excellent condition. It has been used for tooling jobs in batches of up to a maximum of 50 pieces. The machine is connected to the electrical network and ready for operation.

Condition: used, Surface grinder Center height 125 mm Distance between centers 650 mm Grinding wheel diameter 250 mm Grinding disc diameter 400 mm Total power requirement 8 kW Weight approx. 2500 kg This is a machine from Machines4you. Iodpfegfqn Njx Aqqeba

Condition: ready for operation (used), Offered is a used high-precision Studer S35 CNC cylindrical grinding machine. Center distance: 1000mm, center height: 175mm, swing diameter max. approx. 350mm, workpiece weight: approx. 80kg, resolution: measuring systems glass scales range 0.0001mm 0.1µm. Inspection by appointment possible. Ibedeykuucjpfx Aqqsa

Condition: ready for operation (used), Year of construction: 2001, Studer S21 cylindrical grinding machine. Ijdpfszupdrjx Aqqjba

Condition: used, TECHNICAL DETAILS - center height : 100 [mm] - Distance between centers : 650 [mm] - Max. table orientation : [°] - Travel : 650 [mm] - Speed : 100 - 3500 [mm/min] GRINDING WHEEL HOLDER HEADSTOCK - Orientation : [°] - T1 grinding wheel dimensions : 350 x 32 x 127 [mm] - Power : 3 [kW] - Speed : 1600 - 2200 [rpm] - Peripheral speed : [m/s] PART-HOLDER HEADSTOCK - Spindle speeds : - 1200 [rpm] - Power : 0.5 [kW] - Type of cone : CM4 - Max. part weight : 20 [kg] - Orientation : 0 - 90 [°] POWER SUPPLY - Supply voltage : 400 [V] - Power : 8 [kVA] Ibjdpexrg Hxjfx Aqqsa WEIGHT & DIMENSIONS - Machine floor space : 00 x 00 [mm] - Machine height : 1650 [mm] - Machine weight : 1900 [kg] MACHINE HOURS - Number of hours under power : 01 [h] EQUIPMENT - Sony LG20-2 display - Automatic contact detection : SENSITRON 6 - 1 tailstock with fine adjustment - 2 internal grinding spindles : 20.000 / 60.000 [rpm] - Fixed dressing device - Coolant tank - 1 three-key steady rest - 3-jaw chuck, Ø 100 mm - Various grinding wheels

Condition: used, TECHNICAL DETAILS - center height : 100 [mm] - Distance between centers : 650 [mm] - Max. table orientation : [°] - Travel : 650 [mm] - Speed : 100 - 3500 [mm/min] GRINDING WHEEL HOLDER HEADSTOCK - Orientation : [°] - T1 grinding wheel dimensions : 350 x 32 x 127 [mm] - Power : 3 [kW] - Speed : 1600 - 2200 [rpm] - Peripheral speed : [m/s] PART-HOLDER HEADSTOCK - Spindle speeds : - 1200 [rpm] - Power : 0.5 [kW] - Type of cone : CM4 - Max. part weight : 20 [kg] - Orientation : 0 - 90 [°] POWER SUPPLY - Supply voltage : 400 [V] - Power : 8 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 00 x 00 [mm] - Machine height : 1650 [mm] - Machine weight : 1900 [kg] MACHINE HOURS - Number of hours under power : 01 [h] EQUIPMENT - Sony LG20-2 display - Automatic contact detection : SENSITRON 6 Iedeyn R I Hspfx Aqqoba - 1 tailstock with fine adjustment - 1 internal grinding spindle - Fixed dressing device - Coolant tank - 1 three-key steady rest

Condition: used, TECHNICAL DETAILS - distance between centers : 200 [mm] - centers height : 100 [mm] - strokes (X/Z) : 130 / 170 [mm] WHEELHEAD - grinding wheels dimensions : 400 x 63 x 127 [mm] - peripheral speed : 45 [m/sec] - power : 3 [kW] - positioned at : 30 [°] WORKPIECEHEAD - type of cone: MT4 - speeds : 600 - 3000 [rpm] - power : 0,5 [kW] - C axis indexing precision : +/- 0,5 [°] TAILSTOCK - type of cone : CM2 - quill stroke : 30 [mm] ELECTRICAL SUPPLY - voltage : 400 [V] - frequency : 50 [Hz] - installed power : 19 [kVA] DIMENSIONS - floor space : 1760 x 2180 [mm] - height : 2630 [mm] - weight : 4.000 [kg] HOURS - under power : 46.943 [h] - working hours : 21.529 [h] EQUIPMENT - CNC FANUC 16TB Ibedpfx Aqeuhbxmoqsa - soft options : Studer Release B, Pictogramming - interface : RS232C - electronic deported handwheel - direct measuring rules on axes X/Z - tailstock with fine concentricity adjustment - tailstock pinole hydraulic recoil - swiveling dressing wheel upon table : FISCHER AES-72x230/3 - dynamic wheel balancing device : DITTEL HBA 4000 - prepared for diameter sensor : MOVOMATIC ES400 - prepared for parts loading/unloading robot : FELSOMAT - automatic front door - prepared for cooling - electrostatic aspiration : ELOSTA BF2000 - pneumatic collets chuck - 1 wheel-holder - 1 grinding wheel - support arm for zero gravity wheel change - 1 balancing shaft

Condition: used, TECHNICAL DETAILS - Centers height : 125 [mm] - Distance between centers : 400 [mm] - Grinding wheels dimensions : 400 x 127 x 50 [mm] - Power : 4 [kW] - Max. part weight : 30 [kg] - Floor space : 3000 x 3520 [mm] - Weight : 4000 [kg] EQUIPMENT - CN FANUC 21i-T - B axis with 1° precision Ijdjuhbxtjpfx Aqqjba - Chuck 3 jaws - Tool-holder flanges - 1 external grinding wheel - 1 diamond grinder - Tail stock with fine adjustment - 1 internal grinding devices with spindle 42000 rpm - Coolant tank with paper filter - Part probe