Used Sun Diagnostic Device for sale (15,693)

Condition: used, Year of construction: 1997, open-circuit voltage 280 - 320 VDC current intensivity 30 - 80 A output voltage 140 VDC cutting medium Air / Nitrogen total power requirement ca. 11,2 kW weight of the machine ca. 40 kg dimensions of the machine ca. 0,90 x 0,35 x 0,50 m Plasma Cutting Machine Redpsym D Anefx Ag Nsp HYPERTHERM - Hypertherm Powermax 1100 ERTHERM RT 80 hand torch - Recommended cutting capacity: 22 mm - Maximum cutting capacity: 29 mm - Severing capacity: 38 mm - Gas: Air or nitrogen - Gas inlet pressure: 6.1 bar - Gas flow rate: 189 l/min

Condition: good (used), Container turning device, boiler turning device, welding turning device, welding turning device, welding turntable, welding turning device -Container turning device: Welding turning device on rail chassis -Drive motor: kW -Load capacity: 45,000 kg -Drive bearing: Installation dimensions 3860/3000/H1300 mm / 6900 kg -Counter bearing: Installation dimensions 3630/2570/H1300 mm / 3400 kg -Unwinding speed: m/min right/left running Rodpfx Aewx Ed Ssg Njp -Control unit: with hand control and foot pedal -Rail width: 2000 mm -Individual components: see photos -Transport dimensions: 7500/2700/H1300 mm -Weight: 10300 kg

Condition: used, centre height / mm weight 160 kg chucking diameter 250 mm swiveling dividing head with three-jaw chuck from Forkardt F250 Chuck diameter: 250 mm Total weight: 160 kg Rsdpfx Aeymga Nog Njp

Condition: used, Tool presetting device SOMET type SPS 500 U Machine no.: S1 Year of construction: 1987 Table surface: 545 x 1000 mm Travel paths: X = 500 mm, Y = 340 mm Width in portal: 550 mm Height table to portal underside: 250 mm - Longitudinal portal guide right and left on the table - Adjustment via very fine threaded spindles with handwheel Redpfjdzqrtsx Ag Nop - Quick adjustment by electric release - Projector screen Ø 150 mm with crosshair and coordinates MEOPTA PMP100 - 2 clamping fixtures for tool measurement - On base with shelf and drawer Required space (L x W x H): 1100 x 700 x 1650 mm Weight: 560 kg Good condition

Condition: used, TIG welding machine, electric welder KESTRA type WIG 350 AC/DC E-welding machine Serial No. Year of manufacture approx. 1985 Output: 350 amps = 60% duty cycle Adjustment range: 3 stages and fine adjustment Current type: AC / DC Power connection: 400 V, 50 Hz, 32 A plug - 4-metre hose package with TIG torch Rjdpodzql Sjfx Ag Nop - 2-stroke / 4-stroke welding function - Water-cooled - Gas pressure regulator Dimensions (L x W x H): 1050 x 560 x 900 mm Weight: 250 kg The welding test shows good results when welding stainless steel with DC and good results when welding aluminium with AC. The HF ignition does not work, the arc can be started via brief contact.

Condition: used, Plasma cutter CLOOS type CPS 40/80 Redpfjdzqccjx Ag Njp Year of manufacture 1990 Power at 60 % ED 80 Amp. Power at 100 % ED 40 Amp. Adjustment range 40 and 80 Amp (2 steps) cutting capacity with steel max. 25 mm Hose package length 5.5 meters Mains connection 400 Volt with 32 Amp. Plug - Hand torch CLOOS dimension L x W x H 700 x 600 x 750 mm weight 160 kg good condition

Condition: used, Manual pipe bender, pipe bending device, mandrel bending machine Hand-held pipe bender, hand-held wire bending machine, bending machine Manufacturer: MEWAG Bending capacity: max. Ø 16 mm 1 bending tool Ø 15 mm with 25 mm bending radius 1 bending tool Ø 10 mm with 16 mm bending radius Redpowhf Hfjfx Ag Nep 1 bending tool Ø 8 mm with 9 mm bending radius 1 bending tool Ø 6 mm with 8 mm bending radius 1 bending tool Ø 5 mm with 8 mm bending radius - Rotating plate with degree markings - Scope of delivery as shown - Wooden box for storage Dimensions L x W x H: 570 x 480 x 145 mm Weight: 43 kg Good condition

Condition: used, Cooling unit, cooling water chiller, water cooler, chiller O. Hellwig Year of manufacture: approx. 1995 Redpfx Agjpu R Ncs Njp Cooling capacity approx. 6 kW Nominal power of cooling unit: 3 kW Refrigerant R422D Water tank capacity approx. 35 liters Circulation pump flow rate: 40 liters/min Pump power: 0.63 kW Water connections: 1/2 inch Power supply: 380 volts, 50 Hz - Temperature adjustment via rotary potentiometer Space requirements: L x W x H 1100 x 750 x 140 mm Weight: 285 kg

Condition: used, 2-axis removal machine, inserter, servo robot, workpiece gripper, pick-and-place machine, removal robot Removal device, handling device for presses, lathes, etc. GETECHA Type GL-20S No. 13836 Year of manufacture 10/2003 Z-axis travel 1900 mm Travel distance Y-axis 250 mm Travel speed Z-axis max. 1100 mm/sec. Travel speed Y-axis max. 227 mm/sec. infinitely variable travel speed in Y- and Z-axis via SMB servomotors - precise axis movement via linear guides - epis control system - Control panel opposite - Control for conveyor belt, gripper magnets, bead breaker cylinder, vacuum, gripper - External monitoring inputs for emergency stop, press open, press closed, safety doors closed, automatic - Mounted gripper with 3 lifting magnets, 3 pneumatic push-off cylinders (30 mm stroke), 1 pneumatic clamping cylinder (40 mm stroke) - Operating hours 25998 hrs. The system was used as an inserter/removal device on a press. Space requirement L x W x H 2900 x 1800 x 2000 mm Rodpfoharwyjx Ag Nop Weight approx. 800 kg good condition

Condition: used, Electronic crane scale MWT type 142 Make No.: 142571 Year of construction 1993 Tensile force measuring device, crane scale Measuring range: 2.500 to 80.000 kg Smallest measured value: 20 kg Power supply via 12 Volt accumulator - Suspension shackle for double hook, anchor hook - Operation, storage of measured values and tare via remote control - Memory for measured values (weights) - Printer for measured values very massive and high quality body made of steel own weight: approx. 200 kg Rodog D H Riopfx Ag Nep

Condition: used, Plasma cutting unit MB - Welding Technology Type Plasmaprof 50 Equivalent to CEBORA Machine no. 244311 Year of manufacture: approx. 1992 Rsdpodzqa Hofx Ag Nop Power: 50 A = 35% duty cycle 30 A = 100% duty cycle Adjustment range: 2 steps Torch hose length: approx. 6 meters Compressed air connection: 4.7 bar Power supply: 400 Volt, 50 Hz, 32 Amp plug Installation dimensions (L x W x H): 500 x 350 x 700 mm Weight: approx. 80 kg Good condition

Condition: used, Test console, test station, measuring station, test device, measuring instrument, tester for HV, PE, and IS measurements ELABO Type PE/IS/HV SCT 42 / 91-3J.3 + 90-1V + 90-9B.3ZM92510 High-voltage tester The PE/IS/HV SCT 42 / 91-3J.3 is used for testing dielectric strength, insulation resistance, and protective earth voltage drop in accordance with VDE0113 or IEC regulations per EN60204, Part 1. Serial No.: 0064016 Year: 2004 Rated voltage: 230 VAC Rated frequency: 50 Hz Rated current: 6.3 A - Protective earth resistance measurement - Insulation resistance measurement - Protective earth voltage drop measurement The 90-1V unit provides a highly stable DC voltage with low ripple. One output terminal supplies the high voltage, while the other is near earth potential and can be set to a potential of up to 300 V. Device No.: 90-7WZ006 Year: 2000 Mains voltage: 230 VAC Mains frequency: 50 Hz Rated current: 1 A Interference suppression: according to VDE 0871 Rated power: 14 watts Output voltage: 0 - 6.0 kV DC Output current: 0 - 2 mA Connection unit for ELABO testers, switching matrix, connector unit ELABO Type 90-9B.3ZM92510 Serial No.: 0097588 Year: 2009 Rated voltage: 230 VAC Rated frequency: 49 - 61 Hz Rsdpfjf Axn Ajx Ag Nep Rated current: 1 A Number of test points: 5 - Compact unit on mobile frame - Various connection cables and accessories as shown Overall dimensions (L x W x H): 580 x 700 x 1380 mm Total weight: 100 kg Good condition Many other ELABO devices under stock numbers 57819, 57820, and 57821

Condition: used, WIG welding machine, electric welder DALEX type TGKW 55 (AC-DC) Serial No. 532521 Year of manufacture approx. 1975 Output 225 amps = 60 % duty cycle Rodpfedzqacjx Ag Nep 125 amps = 100 % duty cycle Adjustment range 2.8 to 225 amps Current type: DC and AC (AC-DC) Mains connection 380 Volt, 50 Hz - Power adjustment in 5 coarse stages and stepless fine adjustment via potentiometer - 2-stroke and 4-stroke welding function - Remote control with potentiometer for fine adjustment - Digital ampere display - 4-meter WIG torch package - Welding gas pressure-reducing valve - Water-cooled Dimensions (L x W x H): 1050 x 610 x 890 mm Weight: 290 kg Good condition

Condition: used, E-welding machine, stick electrode welding machine ESAB Type LTG 250 Machine no.: 736-820-387 Year of manufacture: 1997 Output: 250 A = 35% duty cycle 190 A = 60% duty cycle 150 A = 100% duty cycle Power setting: stepless - Electrode holder with 6 m connection cable - Direct current (DC) - Fan-cooled - TIG welding may also be possible, but without torch package Power supply: 380 V, 50 Hz, 32 A plug Dimensions (L x W x H): 1200 x 750 x 1050 mm Weight: 180 kg Good condition Rodpfed N E Rvex Ag Nep The unit was originally designed for TIG welding as well. The torch package for TIG welding is not included and its function has not been tested. The water cooling was intended for the TIG torch package. Therefore, the unit is being sold only as an electrode welding machine. Test welds with stick electrodes show excellent welding results.

Condition: used, Back grinding device with permanent magnetic chuck JUNG type HA 20 Device No.: 3344 Profile depth: max. 15 mm Angle adjustment: 0° to 2° Magnetic plate: 115 x 115 mm Rjdpfx Agsdz Sqxj Njp Clamping range: 110 x 75 mm Magnetic plate height: 119 mm Workpiece dimensions L x W x H: max. 60 x 100 x 50 mm Power input: 1 ampere Operating voltage: 24 volts DC (V/DC) - Mechanically switchable permanent magnet Dimensions L x W x H: 500 x 200 x 125 mm Weight: 25 kg Good condition Suitable for tool & die making for tapered, back-ground cutting plates or mold inserts.

Condition: used, Test bench, test station, measuring station, test device, measuring device, tester for HV, PE, and IS measurement Rodpfx Aged Dc Une Nop ELABO Type PE/IS/HV / 91-3J.3 + SHV 16 / 90-1V.3 + 90-9B.3ZM92510 High voltage test device The device PE/IS/HV / 91-3J.3 is used for testing dielectric strength, insulation resistance, and protective conductor voltage drop in accordance with VDE0113 or IEC regulations according to EN60204, Part 1. Serial no.: Year of manufacture: 2003 Rated voltage: 230 VAC Rated frequency: 50 Hz Rated current: 6.3 A - Protective conductor resistance measurement - Insulation resistance measurement - Protective conductor voltage drop measurement The device SHV 16 / 90-1V.3 provides a highly stable DC voltage with minimal ripple. One output terminal supplies high voltage, the other output terminal is close to earth potential and can be set to a maximum potential of 300 V. Serial no.: Year of manufacture: 2005 Mains voltage: 230 VAC Mains frequency: 50 Hz Rated current: 1 A EMI suppression according to VDE 0871 Rated output: 14 watts Output voltage: 0 - 6.0 kV / DC Output current: 0 - 2 mA Connection unit for ELABO tester, switching matrix, connector unit ELABO Type 90-9B.3ZM92510 Serial no.: 0063475 Rated voltage: 230 VAC Rated frequency: 49 - 61 Hz Rated current: 1 A Number of test points: 5 - Compact unit on roller frame - Various connection cables and accessories as shown Overall dimensions (L x W x H): 580 x 700 x 1460 mm Total weight: 100 kg Good condition Many other ELABO devices under stock numbers 57820 and 57821

Condition: used,  Schuppenauslage mit integrierter Presseinrichtung / Mobile delivery with pressing device Heidelberg SPH-70 Schuppenauslage mit Presseinrichtung / Stream delivery with pressing device Heidelberg SPH-70 Baujahr / Year 2016 - Serial-No. 1224446842 Redpeyldg Rofx Ag Njp Size min. 40 × 75mm - max. 700 x 1000mm Produktdicke / Product thickness max. 4 mm Presskraft / Pressing force 12.000N Anzahl der Nutzen / Standard no. of UPS max. 2 - 4 Einlaufhöhe / Infeed height 400 - 1000mm Steuerung MCT1 Bedienpult mit Display MCT control system1 control panel with display Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, length 575 mm width 510 mm height 1015 mm Clamping table, clamping plate, T-slot table Redpfsylz Edjx Ag Njp Dimensions Table length: 575 mm Table width: 510 mm Table height: 1015 mm

Condition: used, depth 850 mm height 2200 mm length 1100 mm weight 2125 kg flute distance 400 mm 1x clamping angle Rjdpfx Agjpy R Rzj Nop Dimension Length: 1100 mm Height: 2200mm Depth: 850mm Weight: 2125kg T-slots: 28x50mm

Condition: used, length 1000 mm Rsdpfx Agjgrngde Nep width 800 mm height 630 mm weight 460 kg T-slot - width 50 mm Clamping table, clamping plate, T-slot table Dimensions Table length: 1000 mm Table width: 800 mm Table height: 630 mm T-slot length: 50 mm Weight: 460 kg

Condition: defective spare-parts repository (used), Year of construction: 2015, The equipment is incomplete and is being sold for parts. Rodpoyhb S Njfx Ag Nop

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, measuring range X-axis: 400 mm, measuring range Z-axis: 500 mm, For sale is a presetting device from the brand Garant, model VG1. The measuring system is in very good condition and ready for immediate use. Technical data: Year of manufacture: 2010 Measuring range X-axis: 400 mm Measuring range Z-axis: 500 mm Measuring accuracy: 1 μm Spindle mounting: SK50, SK40, VDI40, VDI30 Transport and loading can be organized throughout Europe upon request and for an additional charge. Prices are subject to VAT. Viewing is possible by appointment. Please contact us – our team will be happy to assist you. Rjdexf T R Repfx Ag Nep Trade-in or exchange possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you wish to sell yours? For further information or contact options, please visit our website.

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, For sale: Minipack-Torre Modular 50 Digit shrink wrapping machine, made in Italy. A robust and reliable L-sealer, ideal for packaging a wide range of products using shrink film. Currently, we have 4 identical units available in stock – all are in full working order. The price listed is per machine. Location: Ivanka pri Nitre, Slovakia – ready for inspection or immediate collection. Technical Specifications: Manufacturer: Minipack-Torre S.p.A., Italy Model: Modular 50 Digit Year of manufacture: 2001 Voltage: 380–415 V Frequency: 50–60 Hz Power consumption: 2.3 kW Rjdpsxu Dulefx Ag Nep Current: 6.0 A CE certified Serial number: 001088 Condition: - Fully operational and tested - Good technical and visual condition - Suitable for continuous industrial use - Machines regularly serviced and stored indoors Price: €3,500 per unit (Ex-works Ivanka pri Nitre, Slovakia) All four machines are available and ready for immediate sale. Ideal for: - Industrial and commercial packaging - Shrink film applications (PVC, POF, Polyolefin) - Food, cosmetics, and general product wrapping

Condition: good (used), Year of construction: 2006, Motan Dossier unit Year of manufacture approx. 2006 Without display Rjdpfx Aoucg Dkeg Njp

Condition: new, Manual mini punch grinding device for cutting punches, ejector pins, sleeves, and other rod-shaped parts. Suitable for grinding round profiles on surface or tool grinding machines. For workpieces up to max. Ø 10 mm and lengths up to max. 300 mm. Roundness accuracy 5 µm. Weight 3.5 kg. Redpfjymyqbex Ag Nsp