Used Sun Diagnostic Device for sale (16,166)

Condition: good (used), Year of construction: 2012, Lothar Starke Airless piston pump HP 4/32 Lothar Starke Airless unit including spray gun Tripod stand Ratio: 32 / 1 Package with filter Kdsdpfsy A Tpqex Akljr Compressed air manometer Good condition Location: in stock at 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Al-Ko Clean Air Dust Collector, Year of Manufacture: 2024 Exhibition model - Immediately available Exceptional special price Technical data, Power Unit 250 P Intake nozzle: 250 mm Motor rated power: 6.5 kW / 3-phase Voltage: 400 V / 50 Hz Max. volumetric flow rate: 4900 m³/h Rated volumetric flow rate: 3524 m³/h Negative pressure: 2451 Pa Filter area: 22.4 m² Chip collection volume: 2 x 250 L Dimensions (L / W / H) in mm: 2305 x 994 x 2351 Weight: 758 kg Location: Available from warehouse 54634 Bitburg Kodpfscdy I Rsx Akljdr

Condition: new, Year of construction: 2025, Clean air dust extractor RLA 160 For wood dust and shavings, designed for commercial use Article number: 5131620 Brand: Holzkraft For wood shavings and wood dust. Designed for commercial use. All clean air extraction systems in this series are dust-tested according to H3, with a residual dust content of less than 0.1 mg/m³. High extraction performance with a small footprint. Maximum performance in this class. Very quiet. Application area: Clean air extraction systems for wood shavings and wood dust. Designed for commercial use. For all woodworking machines with a corresponding extraction port diameter. Also suitable for multiple dust sources. High-quality, well-designed construction. Robust and compact housing made of galvanized sheet steel. Extraction port can be easily repositioned from left to right, allowing for flexible use. Large inspection openings. Large, mobile chip collection containers with clamping bracket and chip collection bag. System is fully assembled upon delivery, allowing for quick deployment. Mobile. Description of the filter: Kodpfocnw T Iex Aklodr Ultra-compact with maximum filter area. Filter material made of polyester fleece, aluminum-coated, washable, and therefore with a long service life. Filter is standardly tested and approved in antistatic design according to category M-BIA. Filter resistance monitoring via differential pressure sensor, adjustable with warning light on the control panel. The fan is located downstream of the filter. Equipment details: With a novel locking device for secure container positioning. All systems in this series are dust-tested according to H3, with a residual dust content of less than 0.1 mg/m³. Scope of delivery: Metal fan impeller Inspection opening for cleaning the bypass filter Connection cable 5 m with CEE plug 5-pin and phase reverser 2 swivel casters and 2 fixed casters with parking brake Manual cleaning Model: RLA 160 Article No.: 5131620 Technical data: Intake port diameter: 160 mm Nominal air flow: 1448 m³/h Max. air flow: 2400 m³/h Negative pressure at Vnenn: 2247 Pa Filter area: 9.21 m² Filter material: Dust class M Residual dust content: H3 (< 0.1 mg/m³) Filter cleaning: Compressed air supply: Chip collection volume: 2 x 193 l Supply voltage: 400 V Supply frequency: 50 Hz Motor power: 2.2 kW Sound pressure level max.: 73 dB(A) Dimensions (length x width x height): 1681 x 830 x 1654 mm Weight: 254 kg Location: Available from stock in 54634 Bitburg.

Condition: as good as new (ex-display), Year of construction: 2025, For wood chips and wood dust. Designed for commercial use. All clean air extraction systems in this series are dust-tested according to H3, with a residual dust content of less than 0.1 mg/m³. High extraction performance with a small footprint. Maximum performance in this class. Very quiet. Application area: Clean air extraction systems for wood chips and wood dust. Designed for commercial use. For all woodworking machines with a corresponding extraction port diameter. Can also be used for multiple dust sources. High-quality, well-designed construction. Robust and compact housing made of galvanized sheet steel. Extraction port can be easily repositioned from left to right, allowing for flexible use. Large inspection openings. Large, mobile chip containers with clamping bracket and chip collection bag. The system is fully assembled upon delivery, allowing for quick deployment. Mobile. Filter description: Ultra-compact with maximum filter area. Filter material made of polyester fleece, aluminum-coated, washable, and therefore with a long service life. Filter is standard and tested and approved in antistatic design according to category M-BIA. Filter resistance monitoring via differential pressure sensor, adjustable with a warning light on the control panel. The fan is located downstream of the filter. Equipment details: Kodpfx Akecnw U Dsledr With a new locking device for secure container positioning. All systems in this series are dust-tested according to H3, with a residual dust content of less than 0.1 mg/m³. Scope of supply: Metal fan impeller. Inspection opening for cleaning the bypass filter. Connection cable 5 m with CEE plug 5-pole and phase inverter. 2 swivel castors and 2 fixed castors with parking brake. Preparation for connection of machine detection for up to 8 machines and slide valve controls. Manual cleaning. Sound pressure attenuator available as an accessory. Model: RLA 125 M Article no.: 5131256 Technical data Extraction port diameter: 125 mm Motor power: 2.2 kW Mains voltage: 400 V Mains frequency: 50 Hz Nominal volume flow: 1095 m³/h Max. volume flow: Vacuum at Vnenn: Filter area: 5.31 m² Filter material: Dust class M Residual dust content: 0.1 mg/m³ Chip collection volume: 1 x 239 l Max. sound pressure level: 73 dB(A) Dimensions (L x W x H): 1100 x 830 x 1650 mm Height from the lower edge of the extraction port to the ground: 850 mm Weight: 194 kg Location: Arriving at warehouse 54634 Bitburg.

Condition: new, Year of construction: 2025, Description: IE 3 motor as standard Maximum volume flow up to 8,500 m³/h at the fan Approximately 73 m² filter area, residual dust content after H3 Pre-separator as standard 71 dB (A) at full load (according to DIN EN ISO 11201) Already meets the requirements of prEN 16770 Optional: Models with type-tested rotary valve airlock (FSA) Tested backflow damper Integrated automatic extinguishing system Suction nozzle: 350 mm Motor rated power: 11 kW Voltage: 400 V / 50 Hz Maximum volume flow: 8500 m³/h Rated volume flow: 6927 m³/h Negative pressure at Vnenn.: 2765 Pa Filter area: 73 m² Chip collection volume: (net/gross) 3 x 165 L / 3 x 241 L Sound pressure level: 71 dB (A) Dimensions (L x W x H): 3112 x 1058 x 2351 mm Kdjdpfx Akscqy I Sslsr Weight: 1074 kg Location: in stock at 54634 Bitburg

Condition: good (used), Year of construction: 1964, Container rotator, boiler rotator, welding rotator, welding rotator, welding device, welding turntable, welding rotator -Manufacturer: Deuma Heitze, Container rotating device, Welding rotating device type H 02.5 -Load capacity: kg -Roller spacing: 600 - 1670 mm -Rollers: Ø 320 x 950 mm Kdodpfxjzkqt Hj Aklsr -Rolling speed: 0.15 to 1.35 m/min Right/Left rotation -Control unit: with manual control -Individual components: see photos -Transport dimensions: 1150/1105/H550 mm / 1100/600/H550 mm -Weight: 607 kg / 365 kg

Condition: good (used), load capacity: 3,000 kg, Protec Reiss welding rotator, optionally with a perforated table, size as desired. 360° rotation. Adjustable axis. Kdodpfeziyh Djx Akljr Can be used without a perforated table for customer-specific parts or with a perforated table. Table height, top surface: 1.16 m. We have several of these rotators in stock. Additional cost for a new perforated table: €2,600 (2.0 x 1.0 x 0.2 m).

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 600 kg, type of input current: three-phase, input voltage: 380 V, total height: 4,000 mm, total width: 1,900 mm, warranty duration: 12 months, tank capacity: 2,000 l, MIXER 2000L Ksdpfx Akoyrz Ewolsdr The mixing auger is driven by a three-phase, 4-pole electric motor with trapezoidal belt transmission. The range includes sizes from 500 to 20,000 liters.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, Pulsed laser cleaning device with 200 watts of laser power. Significantly more effective than continuous lasers in cleaning and rust removal applications, such as those used in welding lasers. - Demo machine / (used/very good condition), approximately 70 operating hours. - Come and see and test it at our facility now. - Top-quality device at a great price from our showroom. - For paint stripping, rust removal, cleaning stainless steel welds, etc. - 200-watt pulsed laser / air-cooled - German-language menu Kedpfsuhcd Rox Akledr - Available immediately Please also note our attractive leasing/hire-purchase offers. Sale only to commercial businesses. Machine dimensions approximately: Width: 60 cm Height: 120 cm Depth: 110 cm Weight: approximately 100 kg

Condition: good (used), Fork carriage, rotator for wheel loaders, forklifts, telescopic handlers, forklifts, rotator, forklift rotator -Manufacturer: Stabau, forklift rotator 360° continuous rotation -Type: unfortunately without a type designation -Load capacity: approx. 2,500 kg -Mounting dimensions: see photos -Dimensions: 1050/205/H755 mm Kdedozkg U Hepfx Akljr -Weight: 353 kg

Condition: good (used), Welding rotary device, container rotary device, welding rotary device, welding rotary device, welding device, welding rotary table, welding rotary device, gearbox, spur gear gearbox, bevel gearbox -Manufacturer: Guso, welding rotary device, container rotary device on a solid base frame -Load capacity: kg -Control: with hand terminal, foot pedal and digital speed setting -Three-jaw chuck: Forkardt Ø 400 mm, three-jaw chuck bore Ø 140 mm -Speed: 0-1 1/3 rpm Right/Left rotation -Axles: 1 piece -tiltable: No -Height adjustment: Yes -Base frame: without adjustable feet -Transmission: switchable 2 stages -Manufacturer Sawa- Gearbox type CUSII260/720-S -Translation: 1:6375, 1:1530 -Input shaft: Ø 30 mm -Output shaft: Ø 170 mm Kdodpfx Akjzkfuljlsr -Transport dimensions: 2390/1110/H1520 mm -Weight: 2700 kg

Condition: good (used), Welding rotary device, container rotary device, welding rotary device, welding rotary device, welding device, welding rotary table, welding rotary device, gearbox, spur gear gearbox, bevel gearbox -Manufacturer: Guso, welding rotary device, container rotary device on a solid base frame -Load capacity: kg Kedpfx Ajzkfr Dsklsdr -Control: with handheld terminal and foot pedal -Three-jaw chuck: Ø 400 mm, three-jaw chuck bore Ø 130 mm -Speed: 0-2 1/4 rpm Right/Left rotation -Axles: 1 piece -tiltable: No -Height adjustment: Yes -Transmission: switchable 2 stages -Manufacturer Sawa- Gearbox Type -Translation: 1:1000, 1:2508 -Input shaft: Ø 28 mm -Output shaft: Ø 135 mm -Transport dimensions: 2070/1430/H1520 mm -Weight: 1880 kg

Condition: excellent (used), For sale: Professional setting device for internal micrometers SUBITO – Schwenk ESU. Very good condition, complete set in original wooden case with manual. • Model: SUBITO Einstellgerät ESU • Manufacturer: Oskar Schwenk GmbH, Germany • Complete equipment • Stable cast iron base • Precise adjustment and micrometric feed • Ideal for setting SUBITO, ESS, ESU internal micrometers • The whole set is in as-new condition Kdedjx A Ia Iepfx Aklsr

Year of construction: 2023, condition: excellent (used), Professional pneumatic device for emptying SEMCO 600 ml cartridges and containers, designed for industrial applications (adhesives, sealants, pastes, high-viscosity materials). Manufacturer data: • Manufacturer: axiss GmbH (Germany) • Type: 9110 / B-SEMCO600-PN-KM-F • Year of production: 2023 • Serial number: 514 • Quality standard: DIN EN ISO 9001:2015 Kodpfx Aoyc Nzuokljdr • CE marking Technical description: • Pneumatic emptying of SEMCO 600 ml cartridges • Robust construction on an aluminium profile mounting plate • Piston assembly with transparent sleeve (position control) • Pressure regulator with pressure gauge • Directional control valve • Pneumatic quick couplings • Shut-off valve (safety) • Vertical or horizontal mounting possible • Smooth and controlled operation

Condition: excellent (used), Device for precise setting, measurement, and inspection of CNC cutting tools. Equipped with an EZset optical camera system and EZvision (Image Controller 1) software. Condition: very good, complete, ready for operation. Technical data and features: • Model: PRECIsset 400 • Measurement system manufacturer: EZset GmbH & Co. KG, Germany • Control screen: Image Controller 1 • Software: EZvision • Documentation version: 1.1.1 (18.08.2006) • Measuring range X / Z axes: up to 400 mm • Camera with image processing system • Edge, length, and tool diameter measurement function • Results can be saved and printed • USB and RS ports • Power supply: 12 V DC, 40 VA • Year of manufacture: approx. 2018–2019 • Supplied with original PRECITOOL technical documentation Condition: • Used, fully functional • Screen operates correctly • Longitudinal/Transverse axes reference correctly • Well-maintained unit from a German tool shop Ksdpfx Aksxn Awxelsdr Functional description: The PRECIsset 400 enables fast and repeatable tool setup prior to CNC machining. The EZset vision system allows for blade geometry analysis and tool wear inspection. High measurement accuracy ensured by a stable column and industrial-grade optics.

Condition: excellent (used), Precision CNC tool presetting and measuring device from renowned manufacturer KELCH – model Trabant 271-2/M. Equipped with a length and diameter measuring system featuring optics and a KELCH Pico LCD A23 monitor, as well as Heidenhain ND1202T Tool-Chek electronics. Very good condition, complete and fully operational unit. Technical specifications and features: • Manufacturer: KELCH GmbH + Co. Werkzeugmaschinenfabrik, Germany • Model: Trabant 271-2/M • Year of manufacture: 2000 • Measuring unit: KELCH Pico LCD (Version A23) • Display system: Heidenhain ND1202T Tool-Chek • Power supply: 230V / 50–60Hz / 1000 VA • Optical system with measuring camera and LCD screen • Rotary table with holders and two-axis adjustment system • X/Z axis measuring range: up to approx. 400 mm • Axis control from KELCH control panel (joystick + function keypad) • Digital readout, menu in German and English • Complete with original documentation and all connectors Condition: • Used, fully functional • Very clean example from a German toolmaking shop • All axes move smoothly, screen responds correctly • Ready for work Functional description: The KELCH Trabant 271-2/M is designed for fast and precise presetting of cutting tools prior to mounting in CNC machines. The optical system with Pico LCD display allows for measurement of tool length, diameter, and geometry in visual mode. Ideal for inspection and presetting of milling cutters, turning tools, drills, and special tools. Ksdpfsxn Ax Aex Aklodr

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, warranty duration: 12 months, total height: 1,075 mm, total length: 1,560 mm, total width: 820 mm, overall weight: 130 kg, input current: 32 A, power: 8.2 kW (11.15 HP), New device with proofing cabinet 12-month warranty Advantages: + Excellent baking quality at a top price-performance ratio + Robust, durable stainless steel construction + Manual thermostat + Electrically operated raising and lowering of the basket via push buttons + Equipped with a drip table on the left side of the unit (optionally on the right), foldable + Fitted with a foldable steam lid + Easy cleaning and maintenance + Includes 1 turning basket, 6 rows, for easy turning of Berliners + Includes 1 proofing trolley with 10 tipping trays Optional accessories available at extra cost upon request: - Open dipping basket, e.g. for donuts, curd balls, apple fritters, etc. - 5-row turning basket, for larger dough pieces Kdodpfx Asw Sk Arokler - Proofing trolley with 8 or 9 tipping trays (greater spacing between trays) Technical data: - Capacity: max. approx. 36 pieces (depending on product) - Dimensions: --- Footprint: 860 x 820 mm (WxD) --- Overall: 1560 x 820 x 1075 mm (WxDxH) - Power: 8.2 kW - Connection: 400 V - 3Ph - 50Hz - 32A CEE plug - Net weight: 130 kg

Condition: used, Tank rotating device, roll rotating device, welding rotating device, boiler rotating device Tank rotating device for welding pipes and tanks Manufacturer: PH Maschinenbau Type: PH-RBA 30000-SO AT01H424 Kdedszin A Aepfx Aklsr Year of manufacture: 2002 Load capacity of the rotating device: 30 tons Rotational speed: 0 to 2 m/min Tank diameter: 500 - 7000 mm Roll spacing: 100 to 2500 mm Center distance between rolls: 500 to 2950 mm Roll diameter: 400 mm Roll width: 540 mm Motor power: 2 x 0.55 kW Power connection: 230 volts, 50 Hz - Infinitely variable speed adjustment via SEW frequency inverter - Cable remote control - Right and left rotation - Both roll pairs are driven - Rolls with 4 rubber tires each - Manual adjustment of the roll spacing via trapezoidal screw spindle - Rail-mounted chassis with drive, steel cast wheels with smooth roll surface Space requirement L x W x H: 3750 x 2100 x 1200 mm Weight: 3.2 t Good condition

Condition: used, Quantity: More than 10 available Used safety module / fieldbus module for industrial automation and PROFINET applications from Murr Elektronik. Manufacturer: Murr Elektronik Model: MVK-MPNIO F DI8/4 F DO4 7/8" IRT Article number: 5557 Device type: Safety device / safety module Communication: PROFINET IO IRT compatible: Yes Digital inputs: 8 safe inputs / 4 channels Digital outputs: 4 safe outputs Kdjdpfx Akszi Dy Dsljr Connection type: 7/8" connector Application area: Industrial automation technology Mounting type: Field mounting Condition: Used

Condition: used, Quantity: More than 10 available Kdodpfszi Dx Hex Aklor Used safety module / fieldbus module for industrial automation and PROFINET applications from Murr Elektronik. Manufacturer: Murr Elektronik Model: MVK-MPNIO F DI16/8 7/8" IRT Article number: 5556 Device type: Safety device / safety module Communication: PROFINET IO IRT-capable: Yes Digital inputs: 16 safe inputs / 8 channels Connection type: 7/8" connector Application area: Industrial automation technology Mounting type: Field mounting

Condition: good (used), Year of construction: 2009, operating hours: 3,834 h, machine/vehicle number: 193042, load capacity: 120 kg, overall weight: 3,057 kg, construction height: 1,990 mm, product width (max.): 1,780 mm, working height: 12,000 mm, enginetype: Petrol, manufacturer: Teupen Kdedpozhi D Eefx Aklsr

Condition: new, Year of construction: 2025, Suction nozzle diameter: 120 mm or 100 mm Nominal flow rate: 1900 m³/h Chip bag volume: 1 x 0.1426 m³ Filter cleaning: manual Motor power: 1.1 kW Machine height: 1000 x 500 x 1800 mm (L x W x H) Ksdpfewhuufex Aklodr Weight: 39 kg

Condition: new, Year of construction: 2022, Suction nozzle diameter: 200 mm Nominal flow rate: 2800 m³/h Chip bag capacity: 2 x 120 l Filter cleaning: manual Kdjdpfxsv R U H Uo Aklsr Motor power: 2.2 kW Dimensions: 1500 x 500 x 2100 mm (L x W x H) Weight: 53 kg

Condition: new, Year of construction: 2025, Suction nozzle diameter: 200 mm / 2 x 100 mm Nominal flow rate: 1900 m³/h Chip bag volume: 1 x 110 l Filter cleaning: manual Motor power: 1.5 kW Machine height: 1000 x 500 x 2100 mm (L x W x H) Kdjdpfsv N Tydsx Akljr Weight: 39 kg

Condition: new, Year of construction: 2022, Intake nozzle diameter: 180 mm Nominal flow rate: 4200 m³/h Chip collection bag volume: 2 x 175 l Kdodpsd Txblsfx Aklor Filter cleaning: manual Motor power: 3.8 kW / 400V Machine dimensions: 1700 x 600 x 2400 mm (L x W x H) Weight: 69 kg