Used Sun Diagnostic Device for sale (19,970)

Condition: like new (used), Year of construction: 2024, functionality: fully functional, load capacity: 2,500 kg, Dumeta CHGK-5-NDPU roller stand Load capacity 2500 kg Dedpfx Aowffxijdkswc This was a bad investment and has hardly been used, making it in mint condition. This system is available for immediate delivery.

Condition: excellent (used), Year of construction: 2016, Granifrigor KK 310 Tropic Grain Cooling Unit Compact, mobile cooling unit, completely mounted in a plastic-coated frame, for the cold preservation of grain, oilseeds, and other bulk goods. It features an automatic Hygrotherm reheating system and Hygromat for regulating cold air humidity. The Granifrigor Tropic series grain cooling units are optimally designed in terms of performance and energy consumption for the temperature and humidity of tropical climates. Area of ​​Application Reliable grain cooling in tropical climates (heat, high humidity, monsoons, and fog) – reliable humidity control thanks to the HYGROMAT™ automatic system Excellent suitability and reliable operation even at very high outside temperatures thanks to safety refrigerants Handling and Operation Particularly powerful compressors and large heat exchangers for tropical conditions Quiet normal operation thanks to frequency-controlled fans and a sound-optimized compressor Effective, large-area filters with integrated filter monitoring Increased safety thanks to backpressure indicator Optimal control thanks to the viewing window in the air cooler Reliable start-up even at cool outside temperatures thanks to speed-controlled condenser fans Easy and thorough cleaning thanks to good accessibility, e.g. E.g., through heat exchangers with large fin spacing, housing doors, manholes, and inspection openings in the air duct. Energy and environmental balance Economical solution thanks to low power consumption Energy-efficient design thanks to frequency controls and state-of-the-art motors Environmentally friendly safety refrigerant – CFC-free and HCFC-free Further energy savings thanks to winter and summer thermostats Permanent maintenance and monitoring of the desired cooling air humidity and temperature with HYGROTHERM Technical specifications Operating limits Standard version with refrigerant R 407C - Maximum ambient temperature: +43°C - Lowest achievable cold air temperature: +8°C at 95% relative humidity Cooling capacity Initial grain temperature +30°C, cooling to +10-12°C, grain moisture content approx. 16% - Cooling capacity in 2 hours: 310-520t/ 24h Compressor cooling capacity (average temperature) - 160 kW at +10°C evaporation temperature and +40°C condensation temperature Air flow rate standard version 18,000 m³/h (100 mm WS) 1000 Pa 15,400 m³/h (200 mm WS) 2000 Pa Dwsdpfsxlrl Hex Adksc 14,000 m³/h (300 mm WS) 3000 Pa 10,000 m³/h (400 mm WS) 4000 Pa Air flow HP version for high silo backpressure 18,000 m³/h (100 mm WS) 1000 Pa 14,000 m³/h (300 mm WS) 3000 Pa 8,000 m³/h (500 mm WS) 5000 Pa 3,000 m³/h (800 mm water column) 8000 Pa Electrical connection - Electrical power consumption (average): 53 kW - Maximum current consumption without electric heater: 120 A - Electrical connection: 160 A - Current type: 400 V, 3-phase, 50 Hz Dimensions Length: 3370 mm Width: 1810 mm Height: 2410 mm Weight: 1900 kg Filter - 3/4" hose line - Max. flow rate approx. 65 l/h Cold air connection - Diameter: 600 mm Year of manufacture: 2016 New price: €90,500 This unit comes from the Rolls-Royce Solutions Magdeburg Technology Center and is in very good condition. You can find more items - new and used - in our shop! International shipping costs upon request!

Condition: excellent (used), Year of construction: 2020, Pneumatic Double Diaphragm Pump Cobra 40-10 Top condition – Year of manufacture: 2020 Its unique design enables low-pulsation operation. Consistent paint flow for a perfect spray pattern and highest surface quality. Ideally suited for processing shear-sensitive and moisture-sensitive materials. Minimal shear forces – ideal for processing, e.g., UV coatings. Ideal for handling small material volumes and frequent color changes. Scope of delivery: Basic unit on frame, HD double hose 7.5 m, upper container 5 l Ex, AirCoat spray gun AC 4600 Professional including red air cap and holder, AirCoat nozzle ACF 3000 11/40. Dwodpfx Aoxdtkusdksc Technical Data: Ratio: 40:1 Displacement per double stroke: 10 cm³ Flow rate at 200 double strokes: 2 l/min Max. operating pressure: 250 bar Weight: 23 kg Location: 54634 Bitburg Extremely low hours of use –

Year of construction: 2017, condition: used, New: No Empty weight: 5 kg Part suitable for: trucks Type number: 1787899, 1660474 Djdpexlv I Sjfx Adkjwc XF106 Occ zonneklep DAF OEM : 1787899, 1660474 Article nr.: B019009004-veiling Used DAF sun visor

Condition: used, functionality: unexamined, USNR model turning device. Complete Dodpfx Aoxcbicedkewc

Condition: like new (used), functionality: fully functional, 50 litres 2 pieces of 100 litres Dwjdpexk Tx Sofx Adksc 2x150 litres

Condition: good (used), Year of construction: 2023, functionality: fully functional, The machine is in good condition and has been professionally and carefully maintained. Graco airless unit, type Merkur ES with spray gun Dsdpfoxgn Uaex Adkewc Including various nozzles Further information available by email or phone. Private sale, therefore no return, no warranty and no guarantee. Sale is made with exclusion of any liability. No shipping

Condition: used, Year of construction: 2006, The Neolt FT250 Manual Foam Trim Pro 250, manufactured by Neolt in 2006, is a machine with a format of 2500 mm currently in stock and located in Germany. This machine comes with a fixing bar and stand, offering a cutting width of 98 inches. It can handle a maximum cutting thickness of 30mm for foam and 3mm for Forex. The delivery terms are FCA. Format: 2500 mm Dwedpfx Ajvfx Dmodkec Max. Size: 250 cm Net Weight: 70 kg Measurements: 280 L 33 W 120 H Equipment: with Fixing Bar and Stand 98 in Cutting Width, 30mm FOAM and 3mm FOREX Max. Cutting Thickness

Condition: used, Portable hardness tester IMPACT with integrated impact device Dodpfx Aexciwuodkewc Type: TH-130 Hardness testing methods: Rockwell, Vickers, Brinell, Shore Minimum specimen thickness: 3mm with support Battery operation up to 8 hours Printer connection - usable in all positions, including overhead - precise and reliable hardness measurement according to ASTM A956 - Dynamic, fast hardness testing method with direct hardness value display on the screen - Charger - Operating instructions The handheld device displays hardness values in all common scales such as HRC, HRB, HV, HB, and HS.

Condition: ready for operation (used), ZEISS Rondcom 54 Form Measuring Instrument – Surface and Contour Measuring Device Max. Measuring Diameter (OD): approx. 300 mm Max. Workpiece Diameter: approx. 580 mm (depending on configuration) Max. Workpiece Load: approx. 30 kg Rotational Axis (C-axis) – Radial Roundness: 0.020 + 6 H / 10,000 µm (tolerance) Axial Runout: 0.020 + 4 R / 10,000 µm Measuring Speed (Rotation): approx. 2 – 10 rpm Centering Range: ± 2 mm Leveling / Tilting Range: ± 1° Resolution (Rotary Axis): 0.025° Z-Axis (Vertical Travel): 300 mm (optionally expandable to 500 mm) Straightness Deviation Z-Axis: 0.12 µm / 100 mm, 0.20 µm / 300 mm Parallelism Deviation (relative to rotary axis): 0.8 µm / 300 mm R-Axis (Radial Movement) – Travel: 170 mm Straightness Deviation R-Axis: 0.8 µm / 150 mm Parallelism Deviation (C vs. R): 1 µm / 150 mm Linear Scale (on R-Axis): Yes, available as standard (for higher accuracy) Measuring Force (stylus / probe): adjustable, 30 – 100 mN Measuring Range (probe): ± 1000 µm (adjustable) Detector Resolution: up to 0.001 µm (1 nm) Standard Stylus: Length L = 54 mm, Ball Ø = 1.6 mm carbide Power Supply: 100 – 240 V AC, 50/60 Hz Power Consumption: approx. 600 VA Compressed Air Requirement: 0.3 – 0.7 MPa Weight (approx.): approx. 170 kg You are welcome to arrange a viewing appointment. We are happy to organize cost-effective shipping for you! You will receive a proper invoice. Dodpfexhd E Dox Adkswc Export customers can be issued a net invoice, provided a valid VAT ID number is supplied. Sale subject to prior sale. Visit our shop to view our other offers as well. All company names and trademarks are property of their respective owners and are used for identification and description purposes only. Technical data may vary and errors in item descriptions are subject to change.

Year of construction: 1997, condition: good (used), Log infeed and centering device LINCK EV 20. Very good condition, overhauled! 1 x straightening roller head pair, 2 x side centering units, and 2 x hold-down rollers. Through-feed chain. Dwodpfx Adexca S Njkec

Condition: excellent (used), Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Included in delivery are: 01x slide-through protection, used Material color: hot-dip galvanized total length: approx. 2.700 mm U-profile: 50 x 50 mm Agraffe dim.: 335 x 50 mm (HxW) 04x hexagon head screw: M10 x 35 mm 04x Toothed nut: M10 08x washers: M10 Further information: System: SSI Schaefer for type designation: PR350/400 designed for double rack rows suitable f. clear width: approx. 2.700 mm General information about the article: This item is offered for pickup only. Any additional transport or shipment of this or a shipment of this article is associated with additional costs, which are separately depending on the delivery location or scope of delivery can be requested from us. Djdpfx Ash T Uwvedkowc Our services at a glance: (prices on request) Assembly, erection our general assembly conditions are to be observed Rack inspection Rack inspection according to DIN EN 15635 executed according to the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet (without unloading)

Condition: excellent (used), measuring range X-axis: 250 mm, measuring range Y-axis: 380 mm, OCS Alfa-SYS Sara-set 33 Swift tool setting machine in very good condition. Current inspection/test until May 2025. I am including three pieces of fonts with the machine. The machine includes a Dymo Label 450 printer and a mouse with a disc. I am including a book with the machine. Djdpfsv Am Emsx Adkewc

Condition: used, Year of construction: 2006, Kahl Twin Screw Extruder is a machine manufactured by Kahl in 2006. Currently stored in Germany, it comes equipped with a fine grain hopper, fine grain discharge, fine grain sack, a belt unit (Type: BTK 1510-0), water addition, extruder, supply air blower, reconditioned in 2016. It also includes dust removal, tumbler sieve, dedusting, final packaging, belt dryer, product hopper, pipe chain conveyor, cyclone, rotary valve, distributor, dust sack, exhaust air blower, air stream rotation dryer, feed table, mixer, and an additional air supply blower and belt dryer. The delivery terms are FCA. Equipment: 1 x feed table, 1 x tube chain conveyor, 1 x mixer 1 x water addition, 1 x extruder, 1 x supply air fan, 1 x cyclone, 1 x rotary valve, 1 x distributor, 1 x belt dryer, 1 x product hopper, 1 x tube chain conveyor, 1 x fine grain hopper, 1 x fine grain discharge, 1 x fine grain bag, Djdpovfxqyjfx Adkswc 1 x supply air fan, 1 x belt dryer, 1 x rotary valve, 1 x dust bag, 1 x exhaust fan, 1 x airflow rotary dryer, 1 x dedusting, 1 x tumbling screen, 1 x bar removal, 1 x final packaging 1 x belt unit, type: BTK 1510-0 refurbished 2016

Condition: used, PCB test device with contact pin testing, ELABO 99-9Z ZM 107011 test system Test system for single-sided testing of SMD PCBs Manufacturer: ELABO Model / Type: 99-9Z ZM 107011 Dwjdpfxsxcivqj Adksc Serial No.: SN0064623 Year of manufacture: 2004 Without two-hand control panel The machine originates from a production shutdown. You will receive the machine exactly as pictured, without any functional guarantee. For your safety and ours: Please make sure to take advantage of the opportunity for inspection.

Condition: used, Electric chain hoist, electric hoist, crane SWF type presumably SKA 80.12 Year of manufacture: approx. 1995 Dwodpoxcit Nofx Adkec Load capacity: 125 kg Hook path: 6 meters with fine lifting 1 load strand Power connection: 380 Volt, 50Hz

Condition: used, Electric chain hoist, electric lifting device, crane MAN GHH type SKA 83.12 Year of manufacture: approx. 1997 Dwjdpexcit Asfx Adkoc Load capacity: 125 kg Hook path: 8.2 meters Main lifting speed: 8 m/min Fine lifting speed: 2 m/min 1 load chain Power supply: 380 Volt, 50Hz

Condition: used, Vibratory Bowl Feeder / Sorting Unit / Spiral Feeder / Vibratory Conveyor RNA Vibratory bowl, sorting device / screw feeding unit with vibratory feeder for screwdriving applications Feeding system, feeding device Manufacturer: RNA Rhein-Nadel Automation GmbH Model: SRC-N 250-2L Serial No.: Year of manufacture: approx. 2000 Bowl diameter (bottom): 300 mm Bowl diameter (top): 350 mm Bowl internal height: approx. 25 mm Sorting track width: approx. 30 mm Total height (drive + bowl with sorting track): 380 mm Oscillation frequency: 100 Hz / 6000 rpm Power supply: 230 V, 50 Hz - RNA control unit, type ESG 90, for adjustable vibration speed - The feeder was used for feeding automotive blade fuses Space requirement Ø x H: 420 x 390 mm Weight: 52 kg In good condition A bowl feeder always consists of two main components. Dwodpoux Shvefx Adksc 1) Sorting bowl, which aligns the parts 2) Drive unit, which generates vibrations in the bowl via mechanical oscillation and thereby moves the parts.

Condition: used, Vibratory bowl feeder / Sorting device / Bowl feeder / Vibratory feeder RNA Vibration bowl, sorting device / Screw feeding with vibratory feeder for screw technology Feeding system, feeding device Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SRC-N 250-2L Serial No.: Year of manufacture: approx. 2000 Bowl diameter bottom: 250 mm Bowl diameter top: 380 mm Bowl internal height: approx. 70 mm Sorting track width: 30 mm Total height (drive + bowl with sorting track): 390 mm Vibration frequency: 100 Hz / 6000 rpm Mains connection: 230 Volt, 50 Hz - RNA control unit, type ESG 90 for adjustable vibration speed - Vibration bowl with rubber lining - The feeder was used for feeding automotive blade fuses Space requirement Ø x H: 420 x 390 mm Weight: 50 kg Good condition Djdpfx Ajuqrahjdkswc A bowl feeder always consists of two essential components: 1) Sorting bowl, where the parts are oriented 2) Drive unit, which generates mechanical vibrations in the sorting bowl to move the parts.

Condition: used, Electric chain hoist, electric lifting unit, crane ABUS type FN-3 Load capacity: 125 kg Hook path: 4 meters Lifting speed: 7.2 m/min Fine lifting speed: 1.8 m/min Dwsdpfx Adjxcil Sekoc 1 load chain

Condition: used, Electric chain hoist, electric lifting device, crane HADEF Dsdpfjxcil Ejx Adkewc Load capacity: 125 kg Hook path: 3.8 meters Lifting speed: 10 m/min. Fine lifting speed: 3.3 m/min. 1 load strand

Condition: used, E-chain hoist, electric hoist, crane DEMAG type DK5-500-K-V1F4 Factory no.: 63207040 Year of manufacture: 1993 Load capacity 1000 kg Hook path 2.6 meters Distance from suspension to load hook 450 mm Main lifting speed 4 m/min. Fine lifting speed 1 m/min. Cable length of control box approx. 1.7 meters Mains connection 400 volts, 50 Hz. 2 load strands = 1000 kg - Emergency stop Weight 46 kg good condition Djdpfxov Daqrs Adkowc

Condition: used, 4 INGERSOLL adjustable chuck jaws for face plate Chuck jaws for lathe chuck, mechanical clamping device, clamping block No: 39.02.10000 / 501.397 Jaw width 70 mm Jaw length 180 mm Jaw carrier height 150 mm Base plate 325 x 265 mm - Stepped jaws for turning as turning and drilling jaws - Jaw adjustment via trapezoidal threaded spindle - Jaw carrier with 6 recesses 40 x 30 mm for fastening - Distance between recesses 280 x 133 and 220 x 90 mm (centered) Dimensions L x W x H 325 x 265 x 215 mm Dodpsu Axzkjfx Adkewc Weight per jaw 36.5 kg Weight of all 4 jaws 146 kg Good condition

Condition: used, Indexing head with tailstock DECKEL Center height: 100 mm Dwsdpfxsxcbp Nj Adkec Gear ratio: 40:1 Spindle bore: 26 mm - 3-jaw chuck FORKARDT, Type F 160 with one set of step jaws - Crank handle with index plate and sector arms - Swiveling crank handle with index plate for direct dividing - 1 index plate with hole numbers: 36, 37, 40, 58 - 24-step index position (15° increments), graduated scale on the main spindle - Tailstock center with dovetail guide - Complete indexing head rotatable and tiltable on base plate Dimensions (L x W x H): 600 x 400 x 270 mm Net weight: 67 kg Indexing head in need of repair: - Key strip for dovetail guide is missing - Lever for index positioning is broken - Swivel mechanism is stiff

Condition: used, Rotary Table WMW Type D 315 k Serial No.: 16508 Table diameter: 315 mm Table height: approx. 135 mm Transmission ratio: 90:1 - Hand crank with indexing plate and scissors - Scale ring for reading at the crank - Readable degree scale on the rotary table - Swing-out worm for direct indexing - Clamping via clamping screw - 14 mm T-slots in the table plate - Universal joint drive - Built-in indexing plate: 17-25-30-39-47-57 - Rotary table drive suitable for WMW HECKERT console milling machine Type FU 315 E, possibly also for FU 400 E Dwsdpfjxcbpiox Adkoc - Dividing head (indexing plate = 20) suitable for WMW HECKERT console milling machine Type FU 315 E, possibly also for FU 400 E Weight: 145 kg Good condition