Used Surfacing for sale (7,068)

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Tedpfjwiricjx Abteb 6400 € 123.52 € 3000 x 1500 mm 850 mm 8000 kg 1544 kg 200 mm 28 mm - Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes - Hard chrome-plated table surface Cr75 The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market. - Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers) - Grid lines 100 x 100 mm - 4 solid table feet withload capacity 2 ton/feet and levelling option - Different foot variants available (standard, height-adjustable and with castors) - Load capacity 8 to - All-round 200 mm high side cheeks with diagonal perforation - 2-sided millimetre scaling - Substructure with stiffeners

Condition: excellent (used), Marking plate-clamping plate-surface plate Length 1560 mm Tedswaxl Ejpfx Abtob Width 560 mm Thickness 60 mm Weight 180 kg The plate is heavily tipped on the bottom. Surface is finely planed. T-slot 16 mm

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3000x1200x1240 mm Weight 850 kg Total power requirement 5,5 kw Tedov A Hnhspfx Abteb

Condition: used, total height: 2,000 mm, total length: 2,600 mm, total width: 1,800 mm, Empty weight: 3.500 kg - Documentation available: Yes - CE certificate present: No - Drive system: Conventional - Power [kW]: 4.5 - X-axis travel [mm]: 600 - Y-axis travel [mm]: 350 - Z-axis travel [mm]: 510 - Table width [mm]: 800 - Table depth [mm]: 350 - Magnet width [mm]: 600 - Magnet depth [mm]: 350 - Max. grinding wheel diameter [mm]: 350 - Motor power: 4.5kW - Transport dimensions: 2600mm x 1800mm x 2000mm (l x w x h) - Transport weight [kg]: 3500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Todpfx Asxpgwrsbtjb Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1973, Technical details: grinding length: 400 mm grinding width: 200 mm workpiece height: 300 mm dimensions of grinding wheel: 275 - 315 mm magnetic plate size: 400 x 200 mm max. table load: 200 kg weight of the machine ca.: 1,6 t dimension machine xH: 1,55 x 1,45 x 2,20 m Tjdpfxexu Dv Aj Abtsb

Condition: good (used), Year of construction: 1988, voltage 380 V connected load 7,5 kVA dimensions 2725 x 1930 x 1773 mm weight of the machine ca. 2500 kg --> Technical data Main data: --> Table surface: 605 x 300 mm --> Table longitudinal movement max. (manual): 750 mm --> Table transverse movement: 340 mm --> Grinding height between table/new grinding wheel min/max: 22.5 / 322.5 mm --> Standard size of magnetic clamping plate: 600 x 300 mm --> Workpiece weight incl. magnet: 420 kg --> X-axis / longitudinal movement: --> T-slots (number x width): 3 x 17 mm --> Table feed, hydraulic: 0.3 - 25 m/min Tsdpfxew Dvkaj Abteb --> Travel per handwheel revolution: 47 mm --> Y-axis / height movement: --> Automatic vertical feed - coarse in 12 steps: 0.001 - 0.03 mm --> Automatic vertical feed - fine in 8 steps: 0.001 - 0.01 mm --> Distance per handwheel revolution (x1/x10): 0.1 / 1.0 mm --> Graduation on handwheel (x1/x10): 0.001 / 0.1 mm --> Trigger strokes: 0 - 5 --> Rapid traverse: 400 mm/min --> Z-axis / transverse movement: --> Automatic transverse feed intermittent: 0.5 - 20 mm --> Automatic transverse feed / rapid traverse continuous: 0.1 - 1.0 m/min --> Distance per handwheel revolution: 5.0 mm --> Scale mark on handwheel: 0.02 mm --> Standard grinding wheel: --> Ø x width: Ø 355x38 (50) mm --> Bore: Ø 127 mm --> Speed: 1500 rpm --> Accessories Various grinding wheels --> Documentation

Condition: excellent (used), Surface planer SCM F520 Class Working width: 520 mm Todpfx Abox H S Dnjtjb 4-knife cutterhead Traditional knives Electronic raising and lowering of the worktable Main fence adjustable up to 45° Table length: 2700 mm CE certificate Technical documentation (DTR) Year of manufacture: 2014

Condition: new, Year of construction: 2026, max. working width: 1330 mm workable material thickness: 0,5 - 80 mm Infinitely variable feed speed: 0,5 - 6 m / min Grinding belt dimensions: 1910 x 1350 mm Sand rolling brush size: 300 x 400 mm Tjdpox S Dwqofx Abtob Sandbelt line speed: 18 m / s Number of roller-brush planetary revolution shaft heads: 8 pcs. machine thickness servo adjustment precision: 0,01 mm Length: 4200 mm Width: 2300 mm Height: 2400 mm Machine weight: 6500 kg Electrical connected load: 68 kW Standard configuration Machine configuration:3 station variants:1st station: Sanding belt2nd station: Brush elements3rd station: Sanding belt Main components:PLC: SiemensTouchscreen: SiemensLow-voltage devices: SchneiderFrequency converter: SchneiderSuction fan: Elektror, Germany Total connected load:Sanding belt motor: 15 kWBrush motor: 11 kWInfeed belt motor: 4 kWVacuum suction motor: 15 kWFrequency converter for rotating brushes: 15 kW Machine with wet vacuum cleaner Extended machine accessories

Condition: excellent (used), Year of construction: 1980, Grinding length: 600 mm Grinding width: 200 mm Clamping area of table: 600 x 200 mm Tsdpfxox Ir I Ae Abtsb Maximum distance between table and grinding spindle center: 500 mm Grinding wheel dimensions: 250 x 25 x 51 mm Table longitudinal feed hydraulically steplessly adjustable: 1 - 24 m/min Table cross feed per handwheel revolution: 4 mm Grinding spindle speed steplessly adjustable via DC drive: 800 - 4200 rpm DC drive: 1.5 - 5.0 kW Net weight with control cabinet approx.: 2000 kg Space requirement approx.: 3100 x 1700 x 1900 mm

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: 0418260040, The machine is operational, recently serviced. Todpfx Abex R Dw Ioteb

Condition: ready for operation (used), Surface grinder, travel (mm): X485, Y170, Z350, hydraulic, grinding wheel diameter 177.8 mm, 1.5 kW, 2800 rpm, with digital readout. Todpfx Ajy N S Sqsbtob

Condition: like new (used), Year of construction: 2016, Jung Supromatic JF 520 Jung Supromatic JF 520 Surface Grinding Machine, year of manufacture 2016, very good general overhauled original condition. The machine comes from the technical center of a renowned German mechanical engineering company. Technical Data: Year of manufacture: 2000 Technical Data: Clamping area (L x W in mm): 600 x 200 Tjdsy Naw Ispfx Abtsb Grindable area (L x W in mm): 600 x 250 Max. magnet size mm: 500 x 200 Max. grinding wheel dimensions mm: 225 (250) x 25 x 51 Distance table/spindle center mm: Max. 400 Table longitudinal feed traverse m/min: 1 – 20 Creep feed mm/min: 0 – 500 Grinding spindle drive speed RPM: 800 – 4200 Power kW (with creep feed): 1.6 – 2.2 Machine weight approx.: 2.0 t Accessories and Equipment: Magnet Coolant system Machine feet Grinding wheel About the machine: We are offering a Jung Supromatic JF 520 surface grinding machine, year of manufacture 2016, in very good condition. The machine is, of course, fully operational and has completed approx. 50 operating hours since overhaul. All slides move very smoothly and evenly. Even at high speeds, the Jung runs very quietly. This newer generation of surface grinding machines is very user-friendly and can achieve surfaces with a low Rz value. Take the opportunity to inspect this machine under power on site and see for yourself its condition. Scope of overhaul: Mechanical scope: Mechanical basic overhaul Hydraulics Feed Lubrication Cross and vertical adjustment Grinding spindle Dresser Painting to new-machinery quality Geometric scope: Guideway grinding at the manufacturer’s facility (optional) Scraping of the guideways Column pull, measurement, possible re-scraping/grinding, adjusting with pressure stones, check and pattern guideways Setting of cross-grinding on spindle head Aligning the dresser Regrinding the table and magnet Machine acceptance to manufacturer's inspection checklist Electrical scope: Renewal of complete electrics, all limit switches and buttons Conversion of X-axis from cam switch to contactless limit switches New control cabinet RSF position display (2- or 3-axis readout) Holding force regulation for 24V or EP-magnetic chuck Control system modernization New auxiliary control cabinet (control panel top right) Thyristor control for grinding spindle drive Manual cylindrical dressing with head or side dresser (for Diaform operation)

Condition: used, Year of construction: 2008, Manufacturer: Fritz Müller Machine type: Hydraulic drawing press Type: BZE 1200 – 35.1.1 Year of manufacture: 1972 General overhaul: 2008 Total drawing force, press ram: 1,000 – 12,000 kN Drawing force: 7,000 kN Holding force per cylinder: 200 – 1,250 kN Ram surface area: 3,500 × 2,200 mm Max. ram stroke: 1,330 mm Max. drawing depth: 430 mm Todpfxjy Ndz Ro Abtjb Distance, table – holding cylinder, top dead center: 2,700 mm Distance, table – holding cylinder, bottom dead center: 1,420 mm Distance, table – ram, top dead center: 2,500 mm Distance, table – ram, bottom dead center: 1,200 / 1,600 mm Hydraulic table cushion, one-piece: Displacement force: 800 – 2,500 kN Stroke: 0 – 300 mm Cushion surface area: 2,700 × 1,200 mm Table clamping surface: 3,500 × 2,200 mm Clear width between guides: 3,550 mm Max. tool weight: 32 t Max. plate width: 2,200 mm Max. plate length: 1,600 mm Sheet metal thickness: 0.5 – 2.5 mm Feeding height above table: 650 – 900 mm Max. single part weight: 40 kg Max. stack height: 450 mm Max. weight per plate stack: 4.5 t Single or double plate feeding possible Electronic double sheet control available Rapid descent speed: max. 500 mm/s, unregulated Working speed: 30 – 115 mm/s Return speed: 30 – 600 mm/s Documentation: No digital data available Drawings: Partially available as ink drawings; on-site inspection possible Packing lists: No packing lists with individual weights available

Condition: excellent (used), Year of construction: 2009, grinding length: 1,200 mm, grinding width: 600 mm, total length: 3,500 mm, total width: 1,875 mm, feed length X-axis: 1,320 mm, feed length Y-axis: 730 mm, feed length Z-axis: 480 mm, feed rate X-axis: 1,320 m/min, feed rate Y-axis: 730 m/min, grinding wheel diameter: 350 mm, table length: 1,200 mm, table load: 1,400 kg, table width: 700 mm, Surface grinder LGB France - R12070SM MACH-ID 9600 Make: LGB France Type: R12070SM Year: 2009 X - Travel: 1320mm Y - Travel: 730mm Z - Travel: 480mm Table Length: 1200mm Table Width: 700mm Table load: 1400 Grinding stone dimensions:350 x 50 x 127mm Power: 16kW Speeds: 1500Rpm Todpfx Absy Edctjtsb Length: 3500mm Width: 1875mm Height: 2250mm Weight: 4500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 1994, total length: 2,950 mm, total width: 2,100 mm, feed length X-axis: 650 mm, feed length Y-axis: 400 mm, feed length Z-axis: 400 mm, workpiece weight (max.): 400 kg, feed rate X-axis: 5,000 m/min, feed rate Z-axis: 5,000 m/min, grinding wheel diameter: 350 mm, table length: 600 mm, table width: 400 mm, Digital read out system position slides 5 stones and flanches Coolant and Filtration system CE Mark Levelling pads included  Full set off books  X - Travel: 650mm Y - Travel: 400mm Z - Travel: 400mm Table Length: 600mm Table Width: 400mm Table load: 400 Feed rate X-Axis: 0-5000mm/min. Feed rate Z-Axis: 0-5000mm/min. Grinding stone dimensions:350 x 127 x 50mm Power: 6kW Speeds: 1400Rpm Cooling system: Yes Feed rate Y-Axis: 0-5000mm/min. Length: 2950mm Width: 2100mm Todpjyvhxmsfx Abteb Height: 2000mm Weight: 2550kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 2016, operating hours: 100 h, functionality: fully functional, Scraping straightedge made of grey cast iron L1000xB130 mm Price €150.00 Scraping straightedge made of grey cast iron L1000xB50 mm Price €100.00 Scraping straightedge made of grey cast iron L1000xB50 mm Price €100.00 Surface plate made of hard stone L680xB150 mm Price €100.00 Measuring cylinder D85 x L300 made of hardened steel Price €100.00 Surface plate with 2 handles L250x80 mm Price €20.00 Square surface plate 75x75x150 Price €100.00 Round surface plate D170 mm Price €20.00 Tedpfxoyxywyj Abtob Euro pallet with base and frame €30.00 All items can also be purchased individually No guarantee is given for condition, straightness, or accuracy

Condition: like new (used), ELB SMART BD10 STC is a CNC surface/profile grinder engineered for high precision, accuracy and reliability. Capacities: table 1360×590 mm, X1100 Z670 Y400 mm, grinding 1000×600 mm, table load 1000 kg. Specs: wheel Ø400×100 mm (bore127), 1450 rpm, spindle 10 kW, table 2–30 m/min stepless, feeds up to 2000/1500 mm/min, vertical rapid 1 m/min, 3×400V 50Hz, total 30 kW; machine ~6900 kg; dims 3550×2410×2660 mm. Accessories: coolant, paper filtration, oil‑mist extractor, magnetic plate 800×600, redressing/profile roll devices, wheel/flange sets, electronic handwheel. Achieves tight tolerances; suited to automotive, aerospace, toolmaking, medical, watchmaking. Tjdpfx Asyxn N Dsbtob

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, turning length: 196 mm, turning diameter over cross slide: 130 mm, spindle speed (min.): 6,000 rpm, bar diameter (max.): 36 mm, overall weight: 1,900 kg, Equipment: documentation/manual, Yamazaki Mazak QT-6T CNC Turning Center – Excellent Condition We offer for sale a well-maintained Yamazaki Mazak QT-6T CNC Turning Center, manufactured in Japan and kept in excellent mechanical and operational condition. The machine is currently under power, in production, and available for inspection and testing upon appointment. Machine Information - Manufacturer: Yamazaki Mazak - Model: Quick Turn QT-6T - Year of Manufacture: 1999 - Serial Number: 39178 - Country of Origin: Japan - CNC Control: Mazatrol - Configuration: 2-Axis CNC Turning Center (X / Z) - Machine Weight: Approx. 1,900 kg Main Features - 6" Chuck - Collet Chuck - Complete Set of Collets Included - Bar Capacity up to 36 mm - 8-Station Turret - Tool Eye (Automatic Tool Measurement System) - Automatic Parts Catcher - Coolant System - Fully Operational Included Equipment - Fedek Bar Feeder - Bar Feeder Length: 1.5 m - Pneumatic Bar Pushing System - 6" Chuck - Collet Chuck Tjdpfxszal Raj Abtjb - Complete Set of Collets - Full Set of Tool Holders - Original Manuals and Documentation - Various Accessories Additional Equipment Included The machine is supplied with the complete set of spindle protection plastic tubes (bar guide tubes), allowing safe operation with bar stock and minimizing vibration, noise, and bar whipping during spindle rotation. This contributes significantly to machining stability, surface finish quality, and spindle protection when running long bars. Technical Specifications - Maximum Turning Diameter: Approx. 130 mm - Maximum Turning Length: Approx. 196 mm - Spindle Bore: Approx. 45 mm - Maximum Spindle Speed: Up to 7,000 rpm - Bar Capacity: 32–36 mm - X-Axis Travel: Approx. 80 mm - Z-Axis Travel: Approx. 200 mm - Rapid Traverse X/Z: Up to 30 m/min Condition ✔ Excellent mechanical condition ✔ Regularly maintained ✔ Machine under power ✔ Ready for immediate production ✔ Inspection and test run possible ✔ All manuals and documentation available Additional Information This machine is offered as a complete production package and is ideal for precision machining of bar stock, small and medium batch production, and high-accuracy turning applications. The machine comes with extensive tooling, collets, holders, automatic tool setting, automatic parts catcher, bar feeder, and spindle guide tube system, allowing immediate integration into production with minimal additional investment. Loading assistance is available. Videos of the machine running can be provided upon request.

Condition: reconditioned (used), Year of construction: 1998, functionality: fully functional, grinding length: 2,200 mm, grinding width: 500 mm, grinding height: 450 mm, grinding wheel diameter: 400 mm, table speed: 30,000 mm/min, table length: 2,200 mm, table width: 500 mm, grinding wheel width: 100 mm, spindle speed (max.): 4,000 rpm, overall weight: 10,000 kg, rapid traverse X-axis: 30 m/min, warranty duration: 12 months, Precision surface grinding machine, 2200 x 500 mm, workshop-refurbished with a 12-month warranty, available immediately. Includes delivery, commissioning, service, and spare parts, all from a single source. Custom-made by Mägerle with a narrow, semi-enclosed cabin for a Swiss customer. Magnetic table 2200 x 500 mm CNC control system Sinumerik 840 D Grinding wheel drive 25 kW Grinding wheel diameter x width = 400 x 100 mm Peripheral speed 45 m/sec (can also be retrofitted for CBN up to 8,000 rpm upon request) Feed rate range (X / Y / Z) 30 / 3 / 3 mm/min Smallest increment 0.001 mm Balancing device Dittel MBA 5000 Tedpfszbyp Tjx Abteb Total power requirement 82 kVA Machine weight approx. 12 t Space requirement approx. 6.00 x 3.00 x 2.80 m

Year of construction: 1989, condition: ready for operation (used), travel distance X-axis: 1,500 mm, number of axes: 3, This 3-axis ELB Surface Grinder was manufactured in 1989. It features a working area of 1,500 mm x 500 mm, ensuring ample space for various grinding tasks. If you are looking to get high-quality surface grinding capabilities, consider the ELB Surface Grinder we have for sale. Contact us for further details. Tedszb Et Dopfx Abtsb - Manufacturer: ELB- Working Area: 1,500 mm x 500 mm- Year of Manufacture: 1989- Condition: Very good / Fully functional

Condition: good (used), Roughness measuring device, HOMMEL / Jenoptik, type Waveline 20 (Tester T1000), in fully functional condition. Plate size: 400 x 280 mm Column height: 400 mm Tjdpfxszcy N Ae Abtob Plate width: 280 mm Plate length: 400 mm Adjustment range, max.: 300 mm

Condition: ready for operation (used), functionality: fully functional, grinding length: 600 mm, grinding width: 250 mm, space requirement height: 2,440 mm, space requirement length: 3,000 mm, space requirement width: 2,050 mm, The machine has undergone geometric revision and is fully functional. If required, further work can be carried out, such as a complete overhaul or repainting in your desired color. Tjdozc E Azspfx Abtjb

Condition: used, Year of construction: 2021, functionality: fully functional, grinding length: 6,000 mm, grinding width: 800 mm, total height: 800 mm, Technical specifications: • Application: Surface grinding and profile grinding • Grinding area: 6000 x 800 x 800 mm • Grinding wheel: 500 x 100 x 203.20 mm Tjdjzcyccopfx Abtsb • Spindle power: 43 kW • Connected load: 89 kW • Operating hours: approx. 4,400 machine operating hours / approx. 1,600 spindle operating hours • Year of manufacture: 2021 The machine is currently fully functional and can be inspected at the supplier’s premises by appointment. Price is quoted ex works in Lower Saxony; the machine will be prepared/packaged for transport. The machine can be taken over immediately. Equipment: • CAM profile grinding software “WinWop” • Diamond roll dressing unit with 160 mm diamond wheel • Coolant recirculation system • Grinding mist extraction system • Automatic balancing • Spark detection system • Belt filter system with magnetic separator • VPN connection for remote diagnostics/remote maintenance

Year of construction: 2017, condition: used, Used Machine Year of Manufacture: 2017 Features and Technical Specifications: Automatic cutting plotter with vacuum sectors on the work surface Automatic cutting table with automatic detection of print images and reference points The work surface consists of 40 individual vacuum sectors that are automatically activated as needed Todpfx Aezlbqlobtjb Multi-tool cutting head for cutting, scoring, and milling materials up to 50 mm thick Multi-batch cutting capable, allowing different substrates to be cut simultaneously Automatic tool presetting Video projection system for optimizing material yield Cutting speed up to 102 m/min, acceleration 1.4 G Automatic substrate height detection Working area 3100 x 2000 mm Suction sectors in the working area: 40 Cutting speed up to 102 m/min Tooling program: Scoring tool, oscillating blade, router Elitron CAD

Condition: new, Year of construction: 2026, grinding length: 560 mm, grinding width: 240 mm, total height: 2,150 mm, total length: 2,250 mm, total width: 1,720 mm, workpiece weight (max.): 180 kg, feed rate X-axis: 25 m/min, grinding wheel diameter: 220 mm, distance table to spindle center: 450 mm, table length: 508 mm, type of input current: three-phase, table width: 200 mm, grinding wheel width: 20 mm, overall weight: 1,800 kg, rotational speed (max.): 2,850 rpm, power: 5 kW (6.80 HP), input voltage: 400 V, Equipment: documentation/manual, Siemens PLC control Touchscreen Electronic handwheel Digitally controlled automatic vertical feed with servomotor SINO 2-axis digital readout Electromagnetic clamping plate Cooling system LED lighting Grinding wheel Flange Central oil lubrication Todpoykvkxjfx Abtjb Table size ----- 200 x 508 mm T-slot width / quantity ----- 14 / 1 mm Electromagnetic clamping plate ----- 200 x 460 mm Max. longitudinal travel of table ----- 560 mm Max. cross travel of table ----- 240 mm Table speed, hydraulic ----- 5~25 m/min Max. distance spindle - table ----- 450 mm Max. permissible workpiece weight ----- 180 kg Grinding wheel ----- 220 × 20 × 31.75 mm Cross travel Automatic feed, cross ----- 0.2~8 mm / stroke Rapid traverse, cross ----- 990 mm/min Feed per handwheel revolution, cross ----- 4 mm/rev Handwheel graduation ----- 0.02 mm Vertical travel Automatic feed, vertical ----- 0.005 / 0.01 / 0.02 / 0.03 / 0.04 / 0.05 mm Rapid traverse, vertical ----- 480 mm/min Feed per handwheel revolution, vertical ----- 1 mm/rev Handwheel graduation ----- 0.005 mm Main motor ----- 2.2 kW Hydraulic pump motor ----- 0.75 kW Vertical feed motor ----- 0.5 kW Weight ----- 1800 kg Machine dimensions ----- 2250 x 1720 mm