Used Table Feed for sale (22,995)

Condition: used, Year of construction: 2007, Cutting height 175 mm cutting width 750 mm Motor output 5,5 kW saw-blade dia. 550 mm Nodpfx Aey Tpqfjqvelb Weinig OptiCut C700 under-table cross-cut saw for safe and precise cross-cutting of solid wood, especially hard and heavy timber with large cross-sections. The machine works with a pneumatically guided saw unit, two-hand control and hold-down device and is ideal for sawmills, timber construction and industrial solid wood processing.

Condition: used, Feeding technology / Feeding system / Vibratory feeder / Sorting unit / Bowl feeder Vibratory bowl, sorting device / Screw feeding with vibratory feeder for screw technology Feeding system DEPRAG Type: 0611-P/0.75-1S No.: 1183885 Year: 2011 - 2012 The system was used for feeding electrical connector pins. Nlodpfxokpwuus Aqvob Product dimensions: Ø 4 mm, length 39 mm The pins are preloaded in the material hopper; the feed belt conveys the pins as required into the bowl feeder. From the bowl feeder, the product is transferred via the linear feeder to the product inverter. The product inverter orients the product into the correct position and makes it available for further processing. The unit comes from a prototype system; the external electrical control unit is not present and should be replaced by a PLC. Without modification, for example, suitable for the automatic and properly oriented feeding of threaded pins up to M4 x 40. The unit consists of the following components: 1 piece belt hopper / feed conveyor DEPRAG Type: B 10 Serial no.: 1178201 Order no.: 415050A Year: 2011 Fill volume: 10 liters Belt speed: 100 mm/min. Operating voltage: 24 V (DC) - Belt surface dimpled - Foldable stainless steel chute Weight 11 kg 1 piece bowl feeder KENDRION Type: OA C006.504101 / OA C006029 / KQF 465 B5 Bowl diameter (top): 200 mm Bowl diameter (bottom): 100 mm Bowl internal height: approx. 75 mm Sorting track width: approx. 5 to 8 mm Operating voltage: 230 V, 50 Hz. 1 piece DEPRAG vibratory controller for the bowl feeder Type: SZG Controller 6 Serial no: 35 pieces linear feeder KENDRION Type: WS3B/36 Part no: WSB003,564025 Operating voltage: 230 V, 50 Hz. 1 piece DEPRAG vibratory controller for the linear feeder Type: SZG Controller 6 Serial no: 35 pieces product inverter FESTO with 180° swivel range - 1 piece FESTO valve block CPV10-VI 18200 - Compressed air requirement approx. 6 bar - 1 piece MURR base module type MVP12 - Complete unit mounted on a steel plate with 4 support legs Space requirements (L x W x H): 1150 x 520 x 860 mm Weight: 100 kg Very good condition

Condition: excellent (used), CATALOG NUMBER 7394 TECHNICAL DATA - max main blade diameter: 380mm - max cutting height: 110mm - main blade height adjustable up/down Nlodpfx Aqjy Rr R Nsvsb - spindle diameter: 30mm - spindle lock - with sliding table - cutting length on sliding table: 2560mm - cutting width at rip fence: 810mm - with side table - main motor: 5.5kW - table dimensions: 1250x730mm - blade guard included - overall dimensions (L/W/H): 2580x2570x1050mm - weight: 780kg ADVANTAGES – German-made – Used saw, very good condition Net price: 7900 PLN Net price: 1880 EUR (based on 4.2 EUR rate) (Prices may change with significant currency fluctuations)

Condition: new, Catalogue number H0548 - New machine, in stock - CE certificate - Cutting length: 3200 mm - Cutting width: 1150 mm - Cutting height 90°/45°: 80/55 mm - Max. blade diameter: 305 mm - Blade adjustable up/down and at 45° angle - Scoring blade diameter: 120 x 20 mm - Main saw speed: 4500, 5500 rpm - Scoring saw speed: 8000 rpm - Motor: 5.5 kW / 400 V - Scoring motor: 1.1 kW - Carriage guided on steel rods Overall dimensions: - Length: 3220 mm - Width: 3150 mm - Height: 900 mm - Weight: 700 kg - Mechanical height adjustment Nedpfey Rrzhox Aqvolb - Mechanical tilt adjustment - Table extension - Table widening - Angle cutting fence - Includes main blade and scoring blade Net price: 20,320 PLN Net price: 4,990 EUR Net price calculated at exchange rate 4.1 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: used, Year of construction: 2016, Automatic cutting table system for textiles and leather Manufacturer: Atom Type: FlashCut 2H 1660B UP Year of manufacture: 2016 CNC control Working area: 1,540 x 1,200 mm Cutting area: 1,540 x 600 mm Maximum cutting height: 20 mm Maximum traverse speed: 80 m/min Maximum acceleration: 1G Vacuum power: 1 – 8 kW Connected load: 5.5 kW 380 volts, 3 phases, 50 Hz Compressed air: 6 bar, 200 l/min when using pneumatic tool holder 9 bar, 400 l/min 2 independently operating multi-tool heads consisting of: Tool module for all tool holders Writing nib for applying markings 2 punch nozzles with different diameters Minimum diameter: 1 mm Maximum diameter: 8 mm one needle Circulating conveyor belt (transports the material into the working areas) Vacuum table: divided into squares of 300 x 300 mm High-performance vacuum turbine with frequency control up to 1 – 8 kW High-brightness projector Servo drive for the X, Y and Z axes Safety device with light curtain monitoring and emergency stop switch Njdpfx Aqsyf Egxovolb Machine dimensions: 2,210 x 2,506 x 1,841 mm Weight: 1,630 kg 19526

Condition: good (used), Approx. 24 table trolleys – used – : Unit price ex location: €69 (net, excluding VAT)! Minimum purchase: 3 units = 1 pallet Nsdpfxow Db Sco Aqvjlb Manufacturer: unknown (to be provided) Model: unknown (to be provided) Year of manufacture: unknown (to be provided) Dimensions: unknown (to be provided) Width estimated at 40–50 cm, length estimated at 0.70 m Load capacity: unknown (to be provided) Condition: good – very good Available: immediately Location: Rhine/Main area, later warehouse in Frankenberg / Saxony

Condition: good (used), Approx. 11 scissor lift tables with manual lifting mechanism, 150 kg load capacity, 740x450 mm – used – Price per unit ex stock: only €195 (net)! Manufacturer: HanseLifter Type: Scissor lift table with manual lifting mechanism Year of manufacture: unknown Nedjwxrizspfx Aqvslb Load capacity: 150 kg Platform dimensions LxW: 740x450 mm Lift operation: manual via foot pedal Single scissor Lifting height from floor: approx. 74 cm 2 swivel and 2 fixed polyurethane castors Swivel castors with brakes Handle height: 935 mm Length: approx. 1 m Own weight: approx. 48 kg Original price: approx. €485 Condition: good Available: immediately Location: Frankenberg warehouse

Condition: used, Year of construction: 2017, Rotary indexing table Nodpfxjyl Swws Aqvjlb Manufacturer: Expert Tünkers Type: EDX810/0250/8 Year of manufacture: 2017 8-station table (45° indexing) 19526ä

Condition: used, Year of construction: 1991, Eye-level control panel, Aigner integral stop including feed with sliding carriage (without stop ruler), milling stop with digital display and swivel mechanism Nsdoyi A Tdspfx Aqvslb Storage location: Nattheim

Condition: good (used), approx. 4 - 5 pieces work tables, height adjustable - used - : Price ex location: 400.-€ (net), disassembled, packed and loaded! Manufacturer: Herbert Grüttner type: Modulus Year of manufacture: unknown, height adjustable - with motor Type 1 - 1 piece: table top with semicircular cutout width: ca. 1,60m width back side: ca. 1,30m height back side: ca. 1,28m total height back: 1,90m total height incl. lamp: ca. 2,10m Depth: narrow side of the worktop: ca. 95cm total depth of the table at the narrow side: ca. 1,05m Type 2 - 2 pieces: table top approx. W: 2m x 1m total height approx. 2,20m Type 3 - 1 piece: table top approx. W: 1,60m x 0,75m total height approx. 2,20m Type 4 - 1 piece: Table top approx. 0,90mm x 1,30m Condition: good Nljdpfx Aqjki Tv Esvsb Available: from end of Oct./Nov. 2021 Location: Warehouse Frankenberg (Saxony)

Condition: excellent (used), Table milling machine & Aigner table extension - 30 mm spindle - Table dimensions: 1x1 m - Milling fence with fine adjustment Nedpfx Asy Tt Uheqvelb - ELU infinitely variable feed unit

Condition: used, Year of construction: 1987, table length 1000 mm table width 1000 mm table load 1,5 t flange diameter 700 mm turning speed max. 0,04 U/min weight of the machine ca. 1,2 t Nsdpjtqqkujfx Aqvslb dimensions of machine L x W x H 1,60 x 2,0 x 1,50 m

Condition: good (used), Year of construction: 2003, feed length X-axis: 3,500 mm, feed length Y-axis: 2,500 mm, feed length Z-axis: 1,250 mm, total length: 7,200 mm, total height: 5,300 mm, table width: 1,800 mm, total width: 6,800 mm, table length: 2,200 mm, workpiece weight (max.): 12,000 kg, Table type boring mill TOS VARNSDORF - WHN13CNC MACH-ID 9629 Make: TOS VARNSDORF Type: WHN13CNC Control: HeidenHain TNC430 Year: 2003 1e owner machine ca 16.000 Spil hours Chip conveyor Under power  Nedpfsy T E Itjx Aqvjlb X - Travel: 3500mm Y - Travel: 2500mm Z - Travel: 1250mm W - Travel: 800mm Table Length: 2200mm Table Width: 1800mm Table load: 12000 Speeds / ranges: 2800Rpm Power: 37kW Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis: 10000mm/min. Feed rate Y-Axis: 10000mm/min. Feed rate Z-Axis: 10000mm/min. Feed rate W-Axis: 10000mm/min. Number of controlled axis:5 Length: 7200mm Width: 6800mm Height: 5300mm Weight: 36850kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2009, operating hours: 5,280 h, functionality: fully functional, We offer a table-type shot blasting machine – STEM with a table diameter of 1400 mm. The machine is in very good condition and ready for immediate use. The shot blasting machine has two rotating tables and two turbines, each with a power consumption of 5.5 kW. The designed shot blasting unit is manufactured for semi-automatic shot blasting of the external surface of parts placed on a rotating table. The machine is equipped with two rotating tables. Rotating table diameter – 1400 mm Maximum product height – 600 mm Nsdpjy Uc Iaefx Aqvolb Type: 14x6/2S/2WX1M Year of manufacture: 2009 Number of operating hours – 5275 Commissioning date: 03/31/2009 Machine weight: 5000 kg Machine length: 3540 mm Machine height: 5540 mm Machine width: 6600 mm Total power consumption: 20 kW Operating range Blasting wheel, number and type: 2 WX1M External diameter of blasting wheel: 330 mm Blasting wheel speed: 2900 rpm Amount of abrasive material thrown per turbine: 80-90 kg/min Amount of abrasive material for initial filling: 500 kg Rotating table diameter: 1400 mm Rotating table speed: 2 rpm Spindle diameter in the front bearing: 105 mm Maximum torque on the spindle: 2500 Nm Distance from the spindle axis to the clamping surface of the table: 60-560 mm Maximum workpiece weight: 1500 kg

Condition: good (used), Year of construction: 2012, functionality: fully functional, Weiler Praktikant VC precision lathe Manufacturer: Weiler Type: Weiler Praktikant VC precision lathe Year of manufacture: 2008 Condition: used, very good, serviced and inspected with inspection protocol according to factory specifications Technical details Turning diameter: 250 mm Turning length: 650 mm Center height: 160 mm Swing diameter over bed slide: 320 mm Max. swing diameter over cross slide: 190 mm Main spindle: Speed range – main spindle: 30 – 4,000 rpm Power output – main spindle: 10 / 6.0 kW Number of gear stages: 1 Spindle head: 5 / DIN 55027 Spindle diameter in front bearing: 70 mm Spindle bore: 40 mm Usable bar diameter: 40 mm Tool holder: System: MultiFix B Turning tool shank cross-section: 20 x 20 Tailstock: Quill travel: 85 mm Quill diameter: 40 mm Tailstock taper: MK 3 Feeds: Number of feeds: 24 Longitudinal feed: 0.02 – 0.63 mm/rev Cross feed: 0.006 – 0.2 mm/rev Thread cutting: Metric: 0.25 – 8 mm Inches: 80-2 1/” Module: 0.25 – 4 mm Travel distances: Cross slide travel: 150 mm Top slide travel: 110 mm Swivel movement: 180 ° Total power requirement: 15 kVA Nlsdsy Ti E Nopfx Aqvsb Machine weight: approx. 1.0 t Space requirements: approx. 2.5 x 2.0 x 2.0 m Scope of delivery: – Weiler Praktikant VC precision lathe – Machine lamp – Documentation – Three-jaw chuck – Tailstock – Multifix tool holder – 8x machine feet – Original tool set

Year of construction: 2026, condition: new, Ready-to-deliver press feeding line for scaffolding plank production with 4 Ton decoiler, straightener feeder and 200 Ton C-type press. Bosporas Machinery is a manufacturer of coil processing, press feeding and roll forming systems, delivering high-performance and customized industrial solutions worldwide with strong R&D capabilities. This scaffolding plank feeding line is available from stock and ready for fast delivery. The system is designed for perforating, punching and feeding operations in scaffolding plank production and similar metal forming applications. The line combines stable coil feeding, precise straightening and high-capacity press performance in a compact and efficient production solution. Ideal for companies looking for immediate production capacity without long manufacturing lead times. ⚡ FAST DELIVERY ADVANTAGE Stock machine – ready for shipment Fast delivery opportunity Reduced investment waiting time Ready for industrial production setup ⚙️ TECHNICAL CONFIGURATION Coil Width: up to 600 mm Mechanical Decoiler: 4 Ton Capacity Straightening Servo Feeder System C-Type Mechanical Press: 200 Ton Capacity Servo synchronized feeding operation Heavy-duty industrial structure 🔧 LINE COMPONENTS 4 Ton Hydraulic Decoiler Straightening Unit Servo Feeder System 200 Ton C-Type Press Electrical & Automation System Operator Control Panel ⚙️ ENGINEERING FEATURES High precision feeding performance Stable straightening and synchronized press operation Heavy-duty press structure for continuous production Servo motor controlled feeding system Compact and operator-friendly design Suitable for integration with roll forming systems ⚡ OPERATIONAL ADVANTAGES Immediate availability from stock Reliable and continuous production Reduced setup and commissioning time Flexible use for punching and perforation applications Short lead time compared to European manufacturers Nlodpfx Aqsy Nnftovob 🏭 APPLICATION AREAS Scaffolding plank production Perforated metal production Sheet metal punching applications Roll forming pre-feeding systems Construction industry components

Condition: excellent (used), Format circular saw F45 - Year of manufacture 1994 - Tilts to 45° - Duplex miter stop - Laser with 5mW power, red - Control panel on top - Scoring saw - Digital angle display - 5.5kW main motor Nljdpfx Aqoy Tm N Seveb - 2800mm sliding table length, 1m to the right of the blade - Electric height and swivel adjustment

Condition: new, Year of construction: 2025, We offer a new table blasting machine – high-quality Czech production, made using premium materials. Model – TS 330/1. - Diameter of rotary table – 1000 mm. - Maximum height of blasted part – 550 mm. - Overall machine height – 2750 mm. - 1 blasting wheel – power input – 5.5 kW. - Bucket elevator – power input – 0.75 kW. - Table rotation – power input – 0.75 kW - Total machine power input – 7 kW. We also manufacture table blast machines with table diameter – 1500 mm. Equipment with frequency inverter – regulating the rotation speed of the blasting wheel. A major advantage of the machine is the ability to change the turbine’s rotation direction to right or left. Blasting equipment comes with CE certification. Further advantages include high blasting efficiency, quiet operation, low energy consumption, and minimal space requirements for installation. Nsdpfx Aqswt T Uzovslb Within its category, thanks to its design, this table blast machine can be considered highly advanced. (Sandblaster, sand blasting, shot blasting, sandblasting machine, blasting machine, blast cleaner). Blast machine.

Condition: excellent (used), AGT Nlodpfey Tmgksx Aqvjb Combination table saw and miter saw - Cutting width: 380mm - Cutting height: 85/40mm - Weight: approx. 50kg - Tilting and swiveling

Condition: used, Hydr. flat form scissor lift table FLEXLIFT FLUNDER type 1500 / 100 (without hydraulic unit) Year of manufacture 1991 Nominal lifting capacity 1500 kg Lifting capacity (practically tested) 1000 kg (at approx. 350 bar) platform size 2100 x 1400 mm stroke max. 930 mm Overall height - bottom 100 mm (with mounting frame) Overall height - top 1030 mm Hydr. operating pressure 350 bar = lifting force 1000 kg Motor power of hydraulics 1,5 kW Nlodpfx Aol Nbqcoqveb mains connection 400 Volt, 50 Hz - mechanical-hydraulic safety limit switches stop the lowering process when the safety bar is actuated - without hydraulic power unit - without electric control length of installation frame 2270 mm width of mounting frame 1580 mm height of mounting frame = height at bottom 100 mm dead weight of lifting table 500 kg good condition

Condition: new, Year of construction: 2021, functionality: fully functional, Feed rate: 10 m/min – 10 + 18 m/min; Drive motor: 0.75 kW (S6) – 1.1 kW (S6); Precision running and guiding surfaces; Min. workpiece length: 140 mm; Min. Workpiece width: 70 mm. Segmented, rubberized chain plates with quick-change system. The minimum workpiece width varies depending on the workpiece length, height, and surface finish. Swiveling 15" smartouch control panel. Unlimited memory for user-defined edge programs. Nlsdpfx Aqoy Ndhdevob Fine adjustment of path parameters. Simple, clear, and intuitive display of units and functions. Unit selection and precise fine adjustment of the motor-positioned units (adjustment accuracy 1/100 mm) directly via the control panel. Adhesive temperature setting with automatic temperature reduction in standby mode. Pressure setting in the pressure zone. Optimization of the edge overhang during trimming (front and back). Plain text error messages. Maintenance schedule and linear meter counter.

Condition: good (used), Martin panel saw Sliding table: 170 cm Blade tilt and up/down adjustment: hydraulically controlled Motor: approximately 7.5 kW Maximum blade diameter: 450 mm Nsdsy Uw Syjpfx Aqvolb Overall machine width when in operation: 380 cm Condition: good, the motor fan guard is missing, but the machine still functions properly.

Condition: good (used), Year of construction: 1995, Reversible clamping device, 4th axis, rotary table, rotary indexing table, controlled rotary table, dividing head, dividing head, rotary indexing table, rotary coupling -Manufacturer: NIKKEN Rotary table with drive -Type: CNC-100 -Recording: SK40 Nsdpfx Aqoy Tax Hevelb -Clamping: pneumatic -Control: Z3BF UNIT -Tailstock: 2 pieces type P-105 -Dimensions of transport trolley: 600/940/H720 mm -Weight: 119 kg

Condition: used, Vibratory bowl feeder / Sorting unit / Bowl feeder / Vibratory feeder RNA Vibrating bowl, sorting unit / Screw feeding with vibratory feeder for screwdriving technology Feeding system, feeder unit Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SRC-N 250-2L Serial no.: Year of manufacture: approx. 2000 Bowl diameter bottom: 300 mm Bowl diameter top: 350 mm Bowl inner height: approx. 25 mm Sorting track width: approx. 30 mm Nlsdpfouzn Nnjx Aqveb Overall height (drive + bowl with sorting track): 380 mm Vibration frequency: 100 Hz / 6000 rpm Mains connection: 230 Volt, 50 Hz - The feeder was used for supplying automotive blade fuses Space requirements: Ø x H: 420 x 390 mm Weight of bowl feeder: 52 kg Linear feeder / Vibratory feeder / Sorting unit Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SLL 400-400 Serial no. 00835 Year of manufacture: approx. 2000 Maximum rail length: 700 mm Useful load: approx. 1.5 to 2 kg Vibration frequency: 100 Hz / 6000 rpm Mains connection: 220 Volt, 50 Hz - Oscillating plate L x W x H 400 x 65 x 12 mm - Mounted track length 530 mm - Overall height with oscillating plate 145 mm Space requirements: L x W x H: 580 x 120 x 400 mm Weight of linear feeder: 20 kg Control unit for vibration drives, control device, regulator, controller for vibratory feeders / sorting unit / bowl feeder / vibrating bowl / vibratory conveyor Manufacturer: RNA Rhein-Nadel Automation GmbH Type: ESK-N80 / ESG 90 Mains connection: 0 ... 208 V eff (230VAC motor operation) at 230V mains 0 ... 98 V eff (115VAC motor operation) at 115V mains Output voltage: 0...208 V (eff.) adjustable, (230 V mains) Number of power outputs: 2 Output 1: Bowl feeder, linear feeder max. 10A adjustable Output 2: Bowl feeder, linear feeder max. 6A adjustable Total load current: 16 A eff Sensor inputs: 1 Number of enable inputs: 1 (24V DC) Sensor supply: 24V DC, max. 60 mA Sensor delay ON: 0 ... 8 sec. Sensor delay OFF: 0 ... 8 sec. Power output connection: Hirschmann 7-pin - Two power outputs - Sensor amplifier with independently adjustable time stages (on/off) - Soft start (internally adjustable) - External enable input 24VDC Space requirements: L x W x H: 260 x 190 x 140 mm Weight of controller: 3.6 kg All units tested and in good condition.

Condition: used, Universal swivel, tilting, and rotary table DECKEL Universal add-on table for tool milling machines suitable for FP 2L, FP 3L, or FP 4L No. 2314 Year of manufacture: approx. 1975 Clamping surface: 1000 x 520 mm - 6 clamping slots, 16 mm, spacing 90 mm Njdpfx Aed E A I Noqvolb - Clamping plate can be rotated horizontally to the right and left up to 45 degrees, with scale - Can be tilted to/from the machine +/- 15 degrees - Swivel range +/- 15 degrees - Swivel table, tilting table, angle table Permissible load max. 1000 kg Weight: 400 kg Good condition