Used Table Lathe for sale (21,622)

Condition: used, Metal lathe Mammut CD6250B, good condition, year of manufacture 2006, standard equipment, 6 kW, 1500 mm center distance, 250 mm center height, 2000 kg Prices subject to change, errors, printing and typesetting errors reserved Hedpovrvl Usfx Afljfk

Condition: excellent (used), Year of construction: 1995, Maximum distance between centers: 1,000 mm Diameter over lathe bed: 410 mm Spindle bore: 54 mm Hfodpfxezd S Daj Afljk Taper for tailstock: MK 4 Machine weight: approx. 2.1 tons Includes: 3-jaw chuck Includes: Multifix quick-change tool holder Includes: Live center

Condition: good (used), Year of construction: 1984, functionality: fully functional, Swing diameter over bed: 560 mm Swing diameter over cross slide: 250 mm Spindle bore: 65.3 mm Max. power: 15 kW Speeds: 11.2 - 2,240 rpm Distance between centers: 1,000 mm Quill diameter: 80 mm Quill taper: MT 5 Including chip conveyor Including complete documentation Immediately available from stock Hfjdpovn Rlzsfx Aflsk

Condition: used, CATALOGUE NUMBER 7650 Technical data: - max. working length 1500mm - max. working diameter 250mm - milling (disc milling cutter) 7.5kW - spindle – 2800 rpm, 3kW - spindle speed 700/1200/1500/2000 rpm - grinding unit 0.75kW - hydraulic motor 3kW - total power 17.75kW - air consumption 6-8 bar - infeed conveyor for workpieces up to 150x150mm - diameter of dust extraction nozzle 100mm, 160mm - dimensions for transport (length/width/height) 4350x2300x1980mm Hodpfx Afoztrfcjlefk - weight approximately 3000kg ADVANTAGES - made in Germany - automatic hydraulic copying system - original DTR documentation - unpainted - used lathe, very good condition Net price: 59900 PLN Net price: 14262 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (the price may change in case of significant exchange rate fluctuations)

Condition: ready for operation (used), functionality: fully functional, Single spindle automatic lathe TRAUB A-15 is in perfect condition, ready for use Hfjdpsyy Nz Rjfx Aflok Max turning diamater 15 mm

Condition: like new (used), Year of construction: 2024, operating hours: 100 h, functionality: fully functional, DN Solutions LYNX 2100LC – 2024 Model Year: 2024 10" Hydraulic Chuck 2-Axis CNC Turning Center 10-Station Servo Turret FANUC i Plus CNC Control Maximum Turning Diameter: Ø350 mm Maximum Turning Length: 537 mm Main Spindle Speed: 3,500 rpm Main Spindle Motor: 18.5 kW Maximum Spindle Torque: 269 Nm X-Axis Travel: 205 mm Z-Axis Travel: 560 mm Rapid Traverse: 30 m/min (X), 36 m/min (Z) Chip Conveyor Compact High-Rigidity Machine Hfedpfx Ajzpfi Hjfljk Ideal for Heavy-Duty Turning Applications Approximate Machine Weight: 3,450 kg

Condition: new, Catalog number: RE066 TECHNICAL DATA - Main blade diameter: ⌀250 – 350/30 mm - Scoring blade diameter (operates only with the main blade ⌀300, 350 mm): ⌀120/20 mm - Main motor power: 4 kW - Scoring motor power: 0.75 kW - Rotational speed: 4000 rpm - Scoring blade rotational speed: 8800 rpm - Blade tilt: 0 – 45° - Max. cutting length: 3200 mm - Moving table stroke: 3400 mm - Cutting width with parallel guide: 1250 mm - Splitting knife: ⌀350 mm - Parallel fence adjustable to angles of 90° – 45°, accuracy ±1° - Max. cutting height with ⌀300 mm blade: 95 mm - Max. cutting height with ⌀350 mm blade: 120 mm - Upper dust extraction port diameter: ⌀80 mm - Lower dust extraction port diameter: ⌀100 mm - Weight: 650 kg ADVANTAGES – New machine – CE certificate – Warranty The 3200mm version is equipped with a hood and a 45° side guard. The saw does not include blades. Net price calculated according to the euro exchange rate. (In case of significant exchange rate fluctuations, the price may change.) Hsdeztncqjpfx Aflefk Net price: 26000 PLN Net price: 6190 EUR, depending on the exchange rate of 4.20 EUR (Prices may change with higher fluctuations.)

Condition: new, Year of construction: 2025, functionality: fully functional, Heigth of center: 500 mm Distance between center: 3000 mm Bed width: 755 mm Max. swing over bed: 1000 mm Max. swing over slider: 610 mm Diameter of spindlehole: 130 mm Spindlenose: D1-15/short cone 15 Speed range: 3.15 - 315 RPM (21 steps) Range longitudinal feeds: 0.1 - 12 mm/U 57 steps Range cross feeds: 0.05 - 6 mm/U 57 steps Quick feed in Z- and X-Axis: 3700/1850 mm/min Metric thread: 1 - 120 mm Inch thread: 3/8 - 28 Pitch/Inch Model thread: 0.5 - 60 mm Diametral pitch: 1 - 56 DP Diameter of Tailstock Quill: 160mm Quill konus: MK 6 Quill stroke: 300 mm Power of engine: 22 KW Weight: 14400 kg Dimensions LxWxH = 6350 x 2190 x 1810 mm Accerssories - D800 mm independent face plate - 3 axis DRO system - Coolant tank - Steady rest in range of D20 - 480 mm - Following rest in range of D20 - 200 mm - 4-fold tool holder - Chuck cover Hfsdpfx Afszr E E Tjlok - Rapid speed on longitudinal and cross slides - Motorized tailstock

Condition: good (used), Year of construction: 2004, Engel INSERT 200H/40 Control: CC100 Condition: fully funtional Clamping force: 400 kN Opening stroke: 300 mm Ejector force: 20 kN Ejector travel: 100 mm Opening max. : 570 Opening min. : 270 Platen size: 590x340 mm Screw: 25 mm Screw length: 140 mm Hfodpfx Ajtrhv Seflsk Injection volume: 69 cm3 Injection pressure: 2090 bar Weight: 5400 kg Pump drive power: 15 kW

Condition: excellent (used), Year of construction: 2004, Engel INSERT 330H/90 Controll: CC100 Condition: funtional Vertical machine with Horizontal injection Hfedpfxju Dbkdo Aflsk Rotary table diameter: 1100mm Clamping force: 90 ton Opening max. : 570 Opening min. : 270 Platen size: 590x340 Screw: 40 mm Screw length: 160 mm Injection volume: 201 cm3 Injection pressure: 1230 bar Motor: 15 kw Weight: 5600 kg Height 2800 mm

Condition: like new (used), Year of construction: 2019, Arburg 1200 T 2000-800 (vertical machine with rotary table 1200mm) Clamping unit 2000T Table diameter: 1200mm Angle rotation: 180 degrees Clamping force: 200 tons Opening force max. kN/mm: 115/500 Platen daylight max. : 600 mm Injection unit Screw diameter: 45 mm Hfsdpfx Aewugczoflok Shot volume: 318 cm3 Shot weight: 291 g Injection pressure: 2470 bar 1. Model: T model 2. Machine type: 1200 T 2000 - 800 3. Plasticizing unit: Thermoplastics cylinder 45 mm, highly wear-resistant 4. Screw: Reinforced screw coupling for splined coupling geometry 5. Control system: SELOGICA ‘direct’ controller 6. Technology stage: Stage 2 servo-regulated with 2 control pumps 7. Rotary table: Advanced ergonomics special model, 2-station 180° forward/backward alternating 8. Nozzle: Open nozzle 45 mm with nozzle tip 9. In-mould needle nozzles: Electric & hydraulic control for needle nozzle 1, electric & pneumatic control for needle nozzle 2 10. Heating: Heater band for open nozzle, 9 electric heating control circuits for mould heating 11. Clamping platen: Mould mounting platen set, central diameter 125 mm 12. Blow unit: Mould blow unit with pressure reducer at station 1 13. Safety: Optical barrier at loading station, continuous oil cooling and filtration 14. Hopper: Adapter (extension) for feed hopper, machine delivered without 50 L hopper 15. Robot interface: Interface for robot system for station 2 & 3 (based on EM67/1) 16. Electric axes: Basic equipment for electric axes control 17. I/O: 4 programmable inputs/outputs on terminal rail 18. Sockets: Additional socket combination (1 CEE, 1 Schuko) 19. Interfaces: Temperature control device interface (REGLOPLAS), printer USB interface, Compact Flash, EUROMAP 65 chip card user authorisation 20. Acoustic alarm: Error alarm acoustic signal 21. Safety interlock: Interface for safety interlock of door (EUROMAP 73) 22. Cooling circuits: 3 regulated machine-related cooling circuits with flow indicator, 3 manually adjustable cooling circuits for second water manifold 23. Anti-corrosion: Anti-corrosion treatment for rotary table, sealing lip on outer diameter 24. Manual & labels: CD operating manual & spare parts list, Slovak language labels 25. Machine feet: Anti-vibration footplates 26. Other: Hydraulic ejector, external cycle start key, standard equipment packages, new ARBURG colour scheme 27. Display languages: IT/EN/SK

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, clamping force: 1,800 kN, M025 — Wittmann Battenfeld Wittmann Battenfeld HM 180/350H/210S* (-) CLAMPING UNIT • Clamping force: 180 T • Coining: NO • Max mold weight: - kg • Max mold weight per plate: 700 kg • Size between bars (WxH): 570x520 mm • Min mold height: 355 mm • Max mold height: x mm • Max stroke open: - mm • Centering ring FIX / MOVE: 125 / 125 mm • Fast clamping system: NO Hodpfxoy Tn Ens Aflsfk MOLD INTERFACE • Heating zones: 12 (24 pin combi TC/PW (6 zones per harting)) • Water cooling circuits: 2+2 • Hydraulic circuits (cores): 3+1 • Hot runner sliders hydraulic (nozzles): x • Hot runner sliders pneumatic: 2+2 INJECTION UNIT • Screw diameter: 35/30 mm • Nozzle face + thread: R14,5+M35x2,0+R14,5+M35x2,0 • Injection unit type: 350H/210S • Screw stroke: - mm • Max injection capacity: - cm³ • Max injection pressure: 2080/2040 Bar • Max injection rate: 159/102 cm³/s • Accumulator SW / HW: NO / NO ⚡ *ELECTRICAL / ROBOT* • Mold ejector clamp: NO • Sockets 400V/16A: 6 • Sockets 400V/32A: 5 • Sockets 400V/63A: 0 • Robot type: Linear • Quick connector gripper: WGS-QLRD Midi • Vacuum ports: 2 • Air pressure ports: 3 • User inputs / outputs: 0 / 0 \+ Rotary table \+ Robot wittmann

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Controller GE FANUC 21i-TB Swing dia 533 mm Turning dia 340 mm Turning lenght 355 mm Hfjdovw Uqaspfx Afljk X travel 209 mm Z travel 355 mm Spindle hole D50,8 mm Spindle speed 5000 rpm Chuck size max. D200 mm Turret 12-fold Rapid speed 30 m/min Spindle power 11 kW Spindle face A2-6 Tool holder type VDI30 C axis 0,001 degree (programmable) Dimensions LxWxH = 2300 x 1700 x 1700 mm Weight ca 3000 kg Features, accessories - Hydraulic chuck - Short barfeeder EMT Super 80 - Manual Guide in FANUC Software - Drive tool turret and C axis - Tailstock - Part catcher - Manuals Very good condition. The lathe works accurately and run quitely. Ready to buy immediately.

Condition: ready for operation (used), Year of construction: 1984, functionality: fully functional, spindle bore: 250 mm, Oil country lathe SARO SBF 7/3000 Max. diameter: 700mm Hodpfxozt Irxo Afljfk Spindle hole: 250mm Turning length: 3000mm ✅ Working condition ✅ New electrical panel ✅ Full documentation

Condition: excellent (used), Year of construction: 2013, operating hours: 4,300 h, functionality: fully functional, machine/vehicle number: NL 254131163, CNC controller M730BM with MAPS IV Capacity X-axis travel mm: 250 Y-axis travel mm: +/- 50 Z-axis travel: mm 795 Turning length mm: 705 Max. turning diameter mm: ø 366 Swing over bad mm: ø 920 Hfjdpfx Afst Akirolok Swing over cross-side mm: 742 Bar work capacity mm: 80 Upper turret Number of tool slots St: 12 Speed driven tools RPM: 10.000 Drive power driven tools kW: 5,5 / 3,7 (3 mm / cont) Main spindle Speed spindle rpm: 4,000 Drive power spindle kW: 18.5 / 15 (50% ed / cont) Chuck type: BB210 Manufacturer: KITAGAWA Spindle nose: JIS A2-8 Tailstock Tailstocktravel mm: 734 Holder: MT5 equipment Chip conveyor Tool measuring arm Foot switch for chuck or collet system Interface for bar feeder

Condition: used, Year of construction: 2006, turning diameter 580 mm turning length 1040 mm Spindle Speed 3.500 U/min. travel -x axis 250 mm travel -z axis 1040 mm diameter of quill 85 mm weight of the machine ca. 7200 kg Hedozupphepfx Afljfk dimensions 4650 x 2320 x 2060 mm

Condition: used, Year of construction: 2004, Technical data: Main spindle: Max. turning diameter: 33 mm Max. speed: 8000 1/min Drive power: 5.5 kW Drive power at 60% duty cycle: 7.5 kW Slide 1: Slide travel Z1: 320 mm Slide travel X1: 50 mm Slide travel Y1: 255 mm Rapid traverse speed: 30 m/min Ball screw diameter: 25 mm Tool holder slide 1: Number of tools stationary with tool shank 16 x 16: 5 pieces Slide 2: Slide travel X2: 165 mm Slide path Z2: 200 mm Rapid traverse speed: 30 m/min Ball screw diameter: 30 mm Tool holder slide 2: Number of stations for turret with integrated spindle: 8 pieces Number of axially driven tools (integrated): 8 pieces Coolant tank, approx.: 400 l Coolant pump, max. output: 80 l/min Hfedpfx Afstzyx Telok Dimensions (LxWxH), approx.: 2460 x 1510 x 1750 mm Equipment: - CNC control Fanuc iT - Workpiece unloading system - IEMCA bar loading magazine - 5-pos. tool carrier plate for slide 1 - Electrical interface and software for bar loading magazine - Collet chuck holder for main and pick-up spindle - 2 Double drill holder for rear machining support with cylinder - Pick-up spindle workpiece pusher

Year of construction: 1977, condition: used, turning diameter 700-1500 mm clamping length 3000 mm guage width 1676 mm Control weight of the machine ca. 60 t Rafamet UBC 150 wheelset lathe for railway wheelsets Serial No.: 152 110 Year of manufacture: 1977 Machining range: Diameter from 700 mm to 1500 mm Gauge of the wheelsets to be machined in standard version: 1435mm track widths: 1435mm , 1524mm , 1676mm Length of wheelsets to be machined: 1640-3000mm Running diameter of the wheelset: 700-1500mm Driving diameter: 350-1350mm Width of the wheelset tyre: up to 140mm Fork dimensions of the wheelset lathe_ 8700x360x3250mm Total installed power: 172kW Weight of the machine: 59200kg Speed of the setting movement Lifting and centring device: 2500 mm/min. Headstocks: 1320 mm/min. Hjdpfx Asuddglsflefk Quills: 550mm/min. Supports in the longitudinal direction: 1300 mm/min.

Condition: used, turning diameter 260 mm turning length 280 mm control OSP500 1. Machine Specifications Item Unit Specification Number of controlled axes – 2 Swing diameter over bed mm Ø 450 Swing diameter over slide mm Ø 350 Swing diameter over cross slide mm Ø 300 Maximum turning diameter × length mm Ø 260 × 280 Spindle diameter mm Ø 100 Spindle nose – JIS A2-6 Hodpfxswm Rrds Aflsfk Spindle taper mm Ø 70 × 1/10 Spindle bore mm Ø 62 Spindle speed range rpm 35 – 4,000 Z-axis travel mm 320 Z-axis rapid traverse mm/min 20,000 X-axis travel mm 155 X-axis rapid traverse mm/min 15,000 Turret type – V Number of tools – 8 (optional 12) Tool size (external turning) mm ¦ 25 Tool size (internal turning) mm Ø 40 (optional Ø 32)

Condition: used, Year of construction: 2014, control FANUC Series Oi-TD greates pass round over bed 670 mm swing diameter over slide rest 500 mm max. turning diameter 400 mm max. turning length 600 mm spindle nose A2-8 spindle passage 90 mm Hfsdpfx Afozupqlelok diameter in the front bearing 130 mm spindle tunring speed 35 - 3.500 U/min number of tool places 12 Pos. In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale.

Condition: used, Year of construction: 2006, Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 mm Hfedpozumzzjfx Aflek Swing diameter over face slide: 260 mm Face slide travel: 380 mm Main drive Drive power AC motor - 40/60/100% duty cycle: 33/27/22 kW Spindle box Spindle bore diameter: 106 mm Spindle diameter in front bearing: 140 mm Speed range (V constant): 1 - 2,000 rpm Cross slide Feed range, face: 0.001 - 1,000 mm/rev Feed range, face, optional up to: 5,000 mm/rev Feed range, longitudinal and thread pitch: 0.001 - 2,000 mm/rev Feed range longitudinal and thread pitch, optional up to: 13,000 mm/rev Feed force flat: 9,000 N Feed force longitudinal: 12,000 N Automatic tool turret Number of tool stations: 12 With tool drive for 6 stations Tool holder system (DIN69880) VDI40 Equipment SIMENS SINUMERIK 840D sl (Shop Turn with manual functions) COMBI control station C-axis with drilling, milling, and engraving cycles Residual material detection and machining – during roughing and contour pockets MULTIFIX C forne setup Three-jaw chuck SMW AUTOBLOK: HI-GRIP HGF260-81-3 Oil emulsion mist filter for work area extraction: MAHLE LTA600

Condition: refurbished (used), Year of construction: 2022, functionality: fully functional, turning diameter over bed: 540 mm turning length: 1.500 mm turning diameter in the recess: 580 mm Working travel of the lower slide max. approx.: 415 mm adjustment of upper support, max. approx.: 140 mm turning speed range: 0 - 1.800 1/min diam. of main spinde: 135 mm spindle bore: 68 mm internal taper diameter: 68 mm bed width: 403 mm Hfsdpfx Afszumxtolok Equipped with: Three jaw chucks FORKARDT 250 Digital read out 3 axis fixed steady rest feed safety chip tray tool holders, 6 chisel holders, 1 holder for clamping sleeve

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, Control system: SIEMENS 840D Turning diameter: 2,800 mm Turning height: 1,000 mm Hedpfx Afezumwvslsfk Load capacity: 16,000 kg Max. swing diameter, approx.: 2,800 mm Turning diameter - external, max.: 2,800 mm Spindle speed: 63 rpm Travel of the cross slide: 620 mm Ram stroke - max.: 690 mm INCLUDED Chip conveyor 4-position tool turret Hydraulic chuck: 2800 mm EQUIPMENT Tool holder CAPTO 6 Electric handwheel Retrofit in 2009 DESCRIPTION The machine is in very good condition and was used for hard turning of roller bearings. In 2009, the machine was mechanically overhauled by Maschinenbau HELLWIG. As part of this general overhaul, the control system was also upgraded to a SIEMENS 840 Powerline.

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, Control system: SIEMENS 840D Turning diameter: 4,000 mm Turning height: 1,400 mm Travel range of the rotary table: 850 mm Max. swing diameter, approx.: 4,200 mm Turning diameter - external, max.: 4,000 mm Travel range of the cross slide: 850 mm Hfjdpfx Ajzumwijflok Ram stroke - max.: 950 mm EQUIPMENT - Hydraulic chuck - Tool holder CAPTO 6 - Electric handwheel - Retrofit in 2007 INCLUDES Chip conveyor 4-position tool turret DESCRIPTION The machine is in very good condition and was used for hard turning of 4m cylindrical roller bearings. In 2007, the machine underwent mechanical refurbishment by Maschinenbau HELLWIG. As part of this general overhaul, the control system was also upgraded to a SIEMENS 840 Powerline.

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, Processing diameter: 4,200 mm Table speed: 12.3 min-1 Max. workpiece weight: 9,000 kg X-axis: 1,110 mm Processing height: 850 mm Workpiece height: min. 50 / max. 850 mm Control system: SIMATIC S7-300 Tool holder: Grinding segments Integrated dressing unit on the grinding head In 2010, the machine underwent a comprehensive mechanical and electrical overhaul. Hjdpfxjzumubs Aflefk As part of this modernization, the entire automation and drive technology was converted to Siemens technology. The machine is equipped with a MARPOSS P7 in-process measuring system. The measuring system is fully integrated into the Siemens SIMATIC S7-300 PLC control system via PROFIBUS.