Used Tenon for sale (394)

Condition: new, spindle moulder with tillable spindle guaranteed quality at your finger tips - easy-to-use the operator easily adjusts all movements due to a hand wheel with mechanical decimal readouts located on the front of the machine. spindle speed readout via LED's left right turning of spindle spindle moulder fence with manual adjustment machine in version 'LL' with left and right table elongation (2500 mm), pull - out work piece support and emergency stop button carriage on work table for tenoning works incl. fence and work piece clamp incl. feeder unit STEFF 2048 4 rollers 8 speeds work table dimensions 1200 (2500) x 855 mm spindle DM 30 mm usable spindle lenght 125 mm Csdpfxscuwptj Af Aord max. tool DM under table 240 x 80 mm suction connection DM 2 x 120 mm motor 5,5 kW INcL. OPTIONS: version 'LL' with long cast iron tables (2500 mm) & pull out work piece support in front fence with hand wheel adjustment and numerical read out machine dimensions L x B x H = 2500 x 855 x 900 weight approx. 500 kg Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: used, Tenoning spindle 2 Stk. Number of milling agregates 5 St. Spindle diameter 50 mm Control Weinig, PC-Nexus Weinig Unicontrol 10 NC Window System — Optional: Extensive Tooling Set ----- Optionally available (at an additional cost): IV 68 Wood, Wood/Aluminum IV 78 Wood, Wood/Aluminum IV 68 Entrance Doors Manufacturer's Technical Description: ----- Item 1: Weinig Unicontrol 10 NC Window System ----- Cross-cut Saw ----- with laser alignment light; motor power: 3 kW; spindle diameter: 40 mm; spindle speed: electronically variable (with brake) from 3,000 to 6,000 rpm. Max. tool cutting circle: 400 mm Axial adjustment: 150 mm via NC axis Radial adjustment: pneumatic, to 8 positions for top edge rounding Horizontal bottom rounding unit ----- Axial adjustment travel: mechanically coupled with cut-off saw 1st Tenoning and Slotting Spindle ----- Motor power (with brake): 15 kW Spindle diameter: 50 mm Spindle speed: 2,925 rpm Max. tool cutting circle: 400 mm Tool clamping length: 640 mm Axial adjustment travel: NC axis Home position (below table): 5–10 mm Radial adjustment travel: fixed Credpfx Afszawize Aed 2nd Tenoning and Slotting Spindle ----- Motor power (with brake): 11 kW Spindle diameter: 50 mm Spindle speed: 2,925 rpm Max. tool cutting circle: 400 mm Tool clamping length: 320 mm Axial adjustment travel: NC axis Radial adjustment travel: NC axis Home position (below table): 5–10 mm 1st Profiling Spindle (Climb and Conventional Milling) ----- Motor power (with brake): 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool cutting circle: 140 mm Max. tool diameter: 232 mm Tool clamping length: 400 mm (with outboard bearing) Axial adjustment travel: 350 mm (NC axis) Radial adjustment travel: NC axis Home position (below table): 5–10 mm 2nd Profiling Spindle ----- Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool cutting circle: 140 mm Max. tool diameter: 232 mm Tool clamping length: 400 mm (with outboard bearing) Axial adjustment travel: 350 mm (NC axis) Radial adjustment travel: NC axis Home position (below table): 5–10 mm Horizontal Profiling Unit (Top) ----- Motor power (with brake): 3.0 kW Spindle diameter: 40 mm Clamping length: 40 mm Spindle speed: 5,850 rpm Max. tool cutting circle: 130 mm Pneumatic adjustment: 8 positions (axial and radial) 3rd Profiling Spindle ----- Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool cutting circle: 140 mm Max. tool diameter: 232 mm Tool clamping length: 400 mm (with outboard bearing) Axial adjustment travel: 350 mm (NC axis) Radial adjustment travel: NC axis Home position (below table): 5–10 mm Vertical Profiling Unit (Right, at Machine End) ----- Motor power (with brake): 3.0 kW Spindle diameter: 40 mm Clamping length: 160 ...

Condition: used, Tenoning spindle 1 0 Number of milling agregates 2 St. Spindle diameter 40,50 mm Item 1: Okoma UF1 S Angle Combination Unit and Item 2: UF2 EG Rebating Machine, incl. Item 3: Tooling Set for IV78 Timber Windows, IV78 Timber Entrance Doors, and IV78 Timber-Aluminum Windows (Gutmann system) with straight and angled sash profiles For sale on behalf of a customer ----- Manufacturer's Technical Description: Item 1: Okoma UF 1 S Tenoning and Profiling Machine / Rebating Machine Cjdpfx Ajy T R Tbof Ajrd ----- Compact, heavy-duty automatic window machine featuring a cast-iron construction, consisting of: Top-mounted cross-cut saw with 12-position turret stop system; Positive-guided saw guard for accident prevention Tenoning spindle: 40 mm diameter x 252 mm length; 2-step stroke mechanism for 3 tool positions (stroke height: 83 mm); Motor: 7.5 kW Sliding table: Adjustable on both sides from 0 to 60 degrees Automatic feed system with various infinitely variable speed settings; dual pneumatic clamping system; Length stop (LAS) with 3-position system, 2300 mm capacity Automatic transfer unit to the profiling section Profiling spindle: 40 mm diameter x 252 mm length Pneumatic stroke: 112 mm (adjustable) for 2 tool positions Motor: 7.5 kW; Spindle horizontally adjustable relative to the tool cutting edge; Adjustable front milling fence jaw Glazing bead saw with 3 kW motor and 4-position turret head adjustment; Heavy-duty articulated feed system, infinitely variable from 0 to 25 m/min. adjustable, Roller groups pivotable inward and outward Counter-stop with 5-position turret head Frame milling unit ----- Item 2: OKOMA Automatic Rebating Machine, Model UF 2 EG ----- Power Specifications: - Operating voltage: 3-phase, 380 V, 50 Hz - Compressed air: Air requirement: 13 NL/min; Operating pressure: 8 bar Conditioned air: According to Pneurop 6611 1. Profiling Spindle 1: - Spindle arrangement: Right - Power: 11 kW - Speed: 7000 rpm - Direction of rotation: Climb and conventional milling - Spindle diameter: 50 mm - Usable length: 272 mm - Max. tool diameter: 230 mm - Vertical (U-axis) movement of the profiling spindle - Vertical positioning: Actuation: Pneumatic cylinder; 90 mm stroke for 3 tool positions Position sensor: Limit switches - Horizontal positioning: Actuation: Pneumatic cylinder (forward/backward) Position sensor: Limit switches - Automatic plunge mechanism: Plunge speed adjustable to ensure tear-out-free rebating - Safety and dust extraction hood with 140 mm diameter connection port 2. Profiling Spindle 2: - Spindle arrangement: Right - Power: 11 kW - Speed: 7000 rpm - Direction of rotation: Counter-rotation - Spindle diameter: 50 mm - Usable length: 272 mm - Max. tool diameter: 230 mm - U-axis movement of the profiling spindle - Vertical positioning: Drive: Pneumatic cylinder; 90 mm stroke for 3 tool positions Position sensor: Limit switches - Horizontal positioning: Drive: Pneumatic cylinder (forward/backward) Position sensor: Limit switches - Safety and dust extraction hood with connection port (140 mm diameter) 3. Hardware Routing Unit EG: - Spindle arrangement: Right - Drive: 3 kW three-phase motor - Speed: 6000 rpm - Spindle diameter: 30 mm - Usable length: 47 mm - Vertical positioning: None - Horizontal p...

Condition: excellent (used), Year of construction: 2011, Thomas Pettersson (Sweden). Fully automatic compact high speed planing line 150m/min !!! High performance handling system suitable for use with a moulder, double end tenoner etc. consisting of the following. 1. Pack infeed system, roller and chain conveyors, 5m + 3,8m. 2. Robot layer feeder (4 layers per minute) with automatic stick collector. 3. Crossfeed system with end trimmer saws (angle adjustable), 22 cycles 400mm wide per minute.. 4. Moulder infeed (right side with adjustable fence line) with 4 feed roller accelerator 150m/min maximum speed, 5. Infeed belt with side pressure to fence. 6. Outfeed belt 5m long. 7. Board sweeper to stacker capable of stacking 80pcs/min. 8. Automatic stacker with stick magazines, 1200mm high packs, 9. Magazine for automatic loading of pallets to outfeed, holding 10 pallets. 10. Outfeed roller conveyor, 5m long.. 11. Control system with remote panels. This high speed fully automatic line could be used for feeding a moulder, resaw, multi-rip etc. It could be modified to suit feeding a double end tenorer etc also. If you need a highly efficient, compact, labour saving handling system for lengths up to 2.1m then this could be the equipment for you. Crjdpfx Aoth Taasf Aed Very suitable for doors, windows, furniture, specialist packaging etc. Inspection is very welcome.

Condition: excellent (used), LOG CABIN MILLING MACHINE FOR PRODUCING CHALET CORNER JOINTS BY MILLING FOUR SIDES OF THE LOG BEAM. MAXIMUM LOG LENGTH 6000MM (DISTANCE BETWEEN 5770 MM) MINIMUM LENGTH 450 MM 4X MILLING HEADS PER SIDE (2 SIDES) CAPABLE OF 3 CYCLES PER MINUTE MAXIMUM WIDTH 250 MM MAXIMUM THICKNESS 140MM SUPPLIED WITH ADJUSTABLE TOOLING SUITABLE FOR 34MM TO 70MM JOINTS 8X 4 KW MILLING MOTORS DIGITALLY DISPLAYED LENGTH MEASUREMENT SYSTEM SIMPLE ELECTRONIC CONTROLS (NO PLC) 5,5 KW FEED MOTOR POSSIBLE TO SUPPLY WITH STACKING UNIT AFTER IF NEEDED MODIFIED LEFT SIDE TO ALLOW CHALET ROOF OVERHANG LENGTH AS NEEDED Credsy Sgx Rspfx Af Ajd VERY GOOD QUALITY KNOTCHING PRICE DISMANTLED AND LOADED TO TRUCK

Condition: used, Year of construction: 2001, Tenoning spindle 2 St. Number of milling agregates 4 St. Spindle diameter 50 mm weight 5500 kg loading dimensions L x W x H 7500 x 2500 x 2400 mm # 7020 Gubisch CW 3/8 with tooling ----- Sold on behalf of the customer from the customer's location. Machine can be viewed in operation Summary of technical data (please inquire about any additional accessories included) ----- Cross-cut saw ----- Electronically controlled cross-cut saw Number of tools: 1 pc. Spindle speed: 3000 rpm Spindle diameter: 30 mm Max. tool diameter: 350 mm Motor power: 3 kW Length stop ----- Electronic length stop 2 Tenoning and slotting spindles: ----- Number of tools per spindle: 4/5 pcs. Spindle stroke: electronic Spindle speed: 3800 rpm Spindle diameter: 50 mm Spindle length: 320 mm Max. tool diameter: 320 mm Motor power: 9.2 kW 1st Profiling spindle (climb and conventional cutting) ----- Number of tools: 4 pcs. Vertical spindle stroke (pneumatic): 3 x 80 mm Horizontal spindle stroke: 80 mm Spindle speed: 6000 rpm Spindle diameter: 50 mm Tool clamping length: 320 mm Max. tool diameter: 240 mm Motor power: 9.2 kW 2nd Profiling spindle ----- Number of tools: 4 pcs. Vertical spindle stroke (pneumatic): 3 x 80 mm Horizontal spindle stroke: 80 mm Spindle speed: 6000 rpm Spindle diameter: 50 mm Tool clamping length: 320 mm Max. tool diameter: 240 mm Motor power: 9.2 kW 3rd profiling spindle ----- Number of tools: 4 Vertical pneumatic spindle stroke: 3 x 80 mm Horizontal spindle stroke: 80 mm Spindle speed: 6,000 rpm Spindle diameter: 50 mm Tool clamping length: 320 mm Max. tool diameter: 240 mm Motor power: 9.2 kW Additional units ----- Overhead grooving unit Further features ----- Online-capable for data transfer from window software Rebating device for tear-free rebating Double-part package Crsdszhxl Sspfx Af Ajd Return conveyor system for one-man operation Screen-based control Used window tooling IV 68, 78, 80, 92 (window profiles available on request!) (Technical specifications according to manufacturer!)

Condition: new, functionality: fully functional, Year of construction: 2026, Applicable Material: metal Condition: New Laser Type: Fiber Laser Cutting Area: 3000*1500mm Cutting Speed: 0-40000mm/min Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT Cutting Thickness: 0-30mm CNC or Not: Yes Cooling Mode: WATER COOLING Control Software: Bodor Thinker Place of Origin: China Brand Name: Bodor Crsdpfx Afsg Eghds Aed Certification: CCC, CE, GS, ISO, Sgs Laser Source Brand: Bodor Laser Head Brand: bodorgenius Control System Brand: bodorpro Weight (KG): 2200 KG Key Selling Points: Tenon-and-mortise type plate welding structure bed Warranty: 3 years Laser power: 1000W Power supply: 110V/220V/380V 50Hz/60Hz

Condition: used, *Available from approx. end of 2025* Fully automatic finger jointing line for the following dimensions: Thickness: approx. 24 – 100 mm Width: approx. 80 – 240 mm Finger jointing length: 400 – 1,500 mm Finished length: 2.50 m – 13.50 m continuously variable Consisting of the following system components: - SMB vacuum destacking lengthwise with 2 lifting tables and 2 package roller conveyors, built in 2013 Package dimensions max. 1.20 x 1.20 x 6.00 m 4 suction pads Sicko system Separation and infeed into roller conveyor for scanner feeding, board turner, switch for too moist, too dry, switch for B-quality, marking station or automatic operation - Bidac end-face scanner for cupping detection, built in 2013 - Brookhuis moisture measurement FMI 5 Year of manufacture 2019 - Microtec scanner Goldeneye 502, year of manufacture 2012 with X-ray, 4 color cameras and new optimization software - Dimter-Opticut 350-2, year of manufacture 2003 with paddle ejector, year of manufacture 2009 and associated sorting belts and pneumatic ejector for 2 additional qualities - NKT packaging - NKT finger jointing system with turntable Spezialpack AH 1050, year of manufacture 2005 consisting of: Milling machine · Tipping station · Threading section length 5.0 m · Cyclic press length 6.00 m · Cross-cut saw - SMB stacking machine, year of manufacture 1998, 2.50 - 13.50 m length, divisible into 2 units (e.g. 2 x 5.0 m) 8 stacking arms, 8 stacking tongues, manually adjustable electro/hydraulic stop, package width: max. 1200 mm, package height: max. 600 mm, hydraulic package pusher Crjdpfjvvi Tyox Af Asd Storage location: Customer

Condition: new, Catalog number: H0531 – new machine, in stock – tiltable spindle – with side trolley – CE certificate – DTR documentation in Polish TECHNICAL DATA spindle diameter 30mm spindle stroke 100mm max spindle diameter 180mm spindle adjustable at an angle of -5+45 degrees table dimensions 1000x360mm sliding table 1000x250mm 4 types of speeds 1800, 3000, 6000, 9000 U/min engine power 2.8kW/3.9kW exhaust nozzle diameter 100mm dimensions length/width/height 1150/1155/730mm weight 270kg PRODUCT FEATURES Milling machine lower spindle - table FS 200SF is a massive construction with a table top made of grey cast iron with a high-quality gauge mounted to hold the processing element and high precision of adjustment. The price includes a milling machine with a sliding side carriage. FS 200SF with a tilting spindle is a device with a wide 4-step speed range: 1800/3000/6000/9000 It is successfully used for processing the edges of straight-line elements and for creating decorative strips, grooves, projections, tenons and dovetails The welded steel body and large cast iron table make it a very solid and stable machine, not susceptible to vibration Cjdpfx Asy S Aa Rjf Aord A precise formatting table included Net price: PLN 14,100 Net price: EUR 3,350 Net price calculated according to the exchange rate of PLN 4.2 / EUR (in the event of greater exchange rate fluctuations, the price may change)

Condition: new, - Sturdy steel and cast iron construction - Dynamically balanced milling unit anchored to the work table - Especially robust design - Smooth operation thanks to precision assemblies and high intrinsic weight - Standard with reversing function (left/right rotation) and electronic interlock when changing direction - Five speeds from 3,000 to 10,000 rpm - Speed change is easily and conveniently operated from the machine side - Standard with MK 4 quick-change spindle system - Large cast iron work table for long-term precision - Easy handling via control elements and speed display located at the front of the machine - Large dimensioned milling fence with fine adjustment and aluminum fence jaws as standard - Fence adjustment via hand crank - Numeric display of the set spindle height, accurate to 0.1 mm - Powerful industrial motors This product comes with a 3-year Stürmer warranty upon online registration. Warranty applicable to end customers in Germany and Austria only. Manufacturer: SCM Group S.p.A. Via del Lavoro 1/3-Po Box 168, 36016 Thiene-Vicenza, Italy Dimensions and Weights: - Net weight approx.: 510 kg Dust Extraction Connection: - Number of extraction ports: 2 - Extraction port diameter: 80 mm - Number of extraction ports on fence: 1 Crodju T Hhkopfx Af Ajd - Extraction port diameter on fence: 120 mm Work Table: - Work table length: 2,500 mm - Work table width: 810 mm - Table height: 923 mm Placement Information: - Space requirement explanation: Dimensions take into account the maximum travel ranges or usable lengths. - Working area length: 3,700 mm - Working area width/depth: 5,000 mm - Working area explanation: Please add the specified measurements to the space requirement to obtain the recommended free installation area for the machine. Equipment: - Milling fence: Heavy-duty professional version with aluminum fence jaws and fine adjustment, adjustment from the front via hand crank with numeric digital display - Curved milling safety hood - Spindle height adjustment: manual - Spindle tilt adjustment: manual - Control: manual adjustment of milling unit height and tilt - Control element position: located on the machine body - Table configuration: table extension on left and right, and pull-out workpiece support (total width 2,500 mm) Electrical Data: - Connection voltage: 400 V - Mains frequency: 50 Hz - Drive motor power: 7.0 kW Milling Spindle: - Spindle tilt: -45 to +45° - Usable spindle length: 140 / 180 mm - Usable spindle length explanation: for spindle Ø 30–35 mm / for spindle Ø 40–50 mm - Milling spindle stroke: 90 mm - Quick-change spindle: MK 4 - Spindle speeds: 3,000 / 4,500 / 6,000 / 8,000 / 10,000 rpm Max. Milling Tool Diameter: - Max. tool diameter (lowerable): 320 x 60 mm - Max. profile milling diameter: 250 mm - Max. tenoning diameter: 350 mm - Max. form milling diameter: 160 mm

Condition: used, Spindle moulder SCM T130 NPS - used - fine-adjustable fence, tenoning and slotting table, right-/left-hand rotation ----- Technical Data ----- Table size: 1,080 x 750 mm, Csdpfx Ajw Nv Nfjf Aord Spindle diameter: 30 mm, Speeds: 3,000/4,500/6,000/7,000/10,000 rpm, Extraction port Ø: 120 mm, Lower extraction port Ø: 120 mm

Condition: excellent (used), CATALOG NUMBER 7855 Technical specifications: - Spindle diameter: 40mm - Spindle working height: 160mm - Interchangeable spindle - Spindle locking - Height adjustable up/down - Original cast iron fence with full adjustment - 4 spindle speed settings + forward/reverse: 3000, 4500, 6000, 9000 rpm - Table dimensions: 1520x1000mm - Extendable table support - With side carriage for tenoning - Carriage with height adjustment - Electric brake - 3-roller power feed - Number of speeds: 4 - Forward/reverse rotation - Power feed motor: 0.65 kW - Main machine motor: 5.9 kW - Extraction port diameter: 3x120mm - Overall dimensions (L/W/H): 2030x1250x1400mm - Weight: 1100kg ADVANTAGES – Made in Poland – Top-mounted control panel – With side carriage for tenoning – 3-roller power feed – DTR technical documentation included – Not repainted – Used spindle moulder, in very good condition Net price: 16,900 PLN Net price: 4,020 EUR Crsdpfx Aszdz I Ujf Aed Net price calculated at 4.2 PLN/EUR exchange rate (Price may change in case of major exchange rate fluctuations)

Condition: used, Tenoning spindle 1 St. Number of milling agregates 5 St. Spindle diameter 50 mm Control Weinig PC-Nexus Weinig Unicontrol 11 Window System with Extensive Tooling ----- Optionally available (at additional cost): - Weinig Univar 6 Rebating Machine (Price upon request!) - Götzinger PowerDrill Drilling and Milling Center for Windows and Doors (Price upon request) Manufacturer's Technical Description: ----- Item 1: Weinig Unicontrol 11 Window System ----- Includes existing tooling sets: - IV 67 (Wood and Wood-Aluminum) - IV 77 (Wood and Wood-Aluminum) - IV 90 (Wood) Cross-cut Saw ----- With laser alignment light; motor power: 3 kW; spindle diameter: 40 mm; electronically variable spindle speed with brake: 3,000–6,000 rpm. Max. tool cutting circle: 400 mm Axial adjustment: 150 mm via NC axis Radial adjustment: pneumatic, to 8 positions for top edge rounding Horizontal Bottom Rounding Unit ----- Motor with brake: 1.5 kW; Spindle diameter: 20 mm; Clamping length: 25 mm Spindle speed: 9,000 rpm Crsdjy T R Tuspfx Af Aod Max. tool cutting circle: 130 mm Axial adjustment travel: mechanically coupled with cut-off saw Radial adjustment travel: pneumatically controlled Tenoning and Slotting Spindle ----- With hydraulically clamped outboard bearing Motor power with brake: 15 kW Spindle diameter: 50 mm Spindle speed: 2,800 rpm Max. tool cutting circle: 400 mm Tool clamping length: 640 mm Axial adjustment travel: NC axis Home position below table: 5–10 mm Radial adjustment travel: fixed 1st Profiling Spindle (Climb and Conventional Milling) ----- Motor power with brake: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Min. tool cutting circle: 140 mm; Max. tool cutting circle: 232 mm Tool clamping length: 400 mm (with outboard bearing) Axial adjustment travel: 350 mm (NC axis) Radial adjustment travel: NC axis Home position below table: 5–10 mm 2 feed rollers opposite the spindle; axial adjustment pneumatically controlled (8 positions) Horizontal Top Profiling Unit ----- Motor power with brake: 3.7 kW Spindle diameter: 40 mm Clamping length: 40 mm Spindle speed: 9,000 rpm Max. tool cutting circle: 130 mm Adjustment: pneumatic, to 8 positions (axial and...) radial 2. Profile Spindle ----- Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool cutting circle: min. 140 mm, max. 232 mm Tool clamping length: 400 mm (with outboard bearing) Axial adjustment travel: 350 mm (NC axis) Radial adjustment travel: NC axis Home position (below table): 5–10 mm Indexed guide fence with muntin support strip 2 feed rollers (opposite the spindle); axially pneumatically controlled (8 positions) Vertical Profile Milling Unit (Right-hand side, at machine end) ----- Motor power (with brake): 3.7 kW Spindle diameter: 40 mm Clamping length: 160 mm Spindle speed: 5,850 rpm Tool cutting circle: min. 112 mm, max. 210 mm Adjustment: Pneumatic (8 positions—axial a...

Condition: used, Year of construction: 1991, Used machine Year of manufacture: 1991 Equipment and technical data: - Designed for all window tooling systems up to 400 mm tool diameter - The machine can be stopped in just a few seconds thanks to the standard braking systems (foot brake for slot spindle, automatic electronic safety brake for saw) - The protective covers for the slot spindle and crosscut saw are designed to allow easy and straightforward tool changes without having to remove the covers themselves - The crosscut saw can be conveniently adjusted from the operator's position using a quick adjustment feature. A six-position turret head allows for rapid changeover to different dimensions - The 40 mm slot spindle can be precisely adjusted in height using an ergonomically positioned handwheel with 0.1 mm graduations - The robust roller table, combined with hardened and ground guides, can be easily moved with minimal effort - Slot spindle motor: 5.5 kW - Slot spindle speeds: 3000/4500 rpm - Spindle diameter: 40 mm - Clamping length: 140 mm - Slot spindle height adjustment: 100 mm - Extraction port: 120 mm - Crosscut saw motor: 2.2 kW Codpfx Afjxymfds Aord - Crosscut saw speed: 2950 rpm - Saw blade mount: 30 mm - Max. saw blade diameter: 400 mm - Max. cutting height: 125 mm - Pneumatic tool clamping - With Festo-LAS fence Weight: approx. 600 kg Availability: short term Location: Röllbach

Condition: used, Year of construction: 2023, Used machine Year of manufacture: 2023 Condition: as new, machine is unused Equipment and technical specifications: - Spindle speeds: 3,500 / 6,000 / 8,000 / 10,000 rpm - Milling spindle tilt: 0 to -45° - Usable spindle length: 125 mm Crsdpfxjw E Tzrs Af Asd - Spindle arbor diameter: 30 mm - Speed display: LED indicator on the machine front - Max. tool diameter (standard): 240 mm - Max. lowerable tool diameter: 230 mm - Max. tool diameter for profile milling: 240 mm - Max. tool diameter for tenoning: 320 mm - Working table length: 1,200 mm - Working table width: 530 mm - Table height: 900 mm - Sliding table length: 1,200 mm - Sliding table width: 360 mm - Sliding table height: 142 mm - Extraction port diameter: 2 × 120 mm - Main drive motor power: 5.0 kW - Connection voltage: 400 V - Mains frequency: 50 Hz Dimensions: 1,200 × 2,000 mm Weight: 510 kg Availability: short-term Location: Saxony-Anhalt

Condition: used, Spline cutting machine with 5 spindles on a carousel, automatic slide movement, Csdpfx Aszh N U Dof Aerd still connected to the power supply; the machine is currently located near Görlitz.

Condition: new, Year of construction: 2025, A compact design sheet fiber laser metal cutting machine with complete protection Crsdpjhwmdrefx Af Aod Small occupied space balances complete protection and higher safety. Each frame of the cutting machine bed is welded after mortise-and-tenon joint to achieve perfect mechanical property and better stability and firmness. The pu Convenient and fast open&close with one click; The laser cutter door is safe and reliable, by using rack-pinion transmission mode combined with self-locking cutting machine system Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. Applicable Material: metal Condition: New Laser Type: Fiber Laser Laser Power: 1500W, 2000W, 3000W, 6000W, 12000W Cutting Area: 3048*1524mm Cutting Speed: 0-100m/min Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: new, Year of construction: 2025, A compact design sheet fiber laser metal cutting machine with complete protection Small occupied space balances complete protection and higher safety. Each frame of the cutting machine bed is welded after mortise-and-tenon joint to achieve perfect mechanical property and better stability and firmness. The pull-out cutting machine table, with the electric table optional, saves space occupation and freshen up the user operation experience. Convenient and fast open&close with one click; The laser cutter door is safe and reliable, by using rack-pinion transmission mode combined with self-locking cutting machine system Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. Applicable Material: metal Condition: New Laser Type: Fiber Laser Laser Power: 1500W, 2000W, 3000W, 6000W, 12000W Cutting Area: 3048*1524mm Cutting Speed: 0-100m/min Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING Codpfehwmdnjx Af Aerd

Condition: new, Year of construction: 2025, A compact design sheet fiber laser metal cutting machine with complete protection Small occupied space balances complete protection and higher safety. Each frame of the cutting machine bed is welded after mortise-and-tenon joint to achieve perfect mechanical property and better stability and firmness. The pull-out cutting machine table, with the electric table optional, saves space occupation and freshen up the user operation experience. Convenient and fast open&close with one click; The laser cutter door is safe and reliable, by using rack-pinion transmission mode combined with self-locking cutting machine system Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. Applicable Material: metal Condition: New Laser Type: Fiber Laser Laser Power: 1500W, 2000W, 3000W, 6000W, 12000W Codjhwrgdjpfx Af Asrd Cutting Area: 1000*1500mm Cutting Speed: 0-100m/min Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: used, Year of construction: 1998, functionality: fully functional, I have an Italian SCM Method K corner processing center for the production of wooden windows for sale. The machine was manufactured in 1998. It is adapted and CE-marked. The machine is in working order and fully operational. It was purchased by us 9 years ago as a backup and has not been used much since then. The machine is in very good condition – the resin marks indicate that it has seen little use. Equipment: - Tenoning unit P - pressure pad – height adjustable on the turret 1TR - numerically controlled positioning cut-off saw 1VSJ - anti-splintering device 1VS - 620mm tenoning spindle, numerically controlled positioning B - fence cylinder – used to adjust the tenoning depth - Profiling unit 1VD - 320mm profiling head – numerically controlled height positioning, depth on the turret G1 - fence with adjustable ON/OFF stroke 2VD - 320mm profiling head – numerically controlled height positioning, depth on the turret 3VD - 160mm profiling spindle – adjustable in positions 1 and 2 G2 - fence for recovering window bead 1SL - saw for recovering window bead, adjustable in ON/OFF position Feed unit - stepless speed adjustment and height adjustment of the workpiece Crsdpezhimyofx Af Ajd I have documentation for this machine. In addition, included in the price of this machine, are Aigner tools for the production of 90mm windows. This is not a complete set – documentation is available. In addition, the price includes a whole box of new, replaceable blades for these tools, both straight and profile blades – I think it is worth several thousand Euros. Export price – domestic price + VAT Transport is the responsibility of the buyer.

Condition: used, Year of construction: 1987, machine/vehicle number: 1815, functionality: fully functional, power: 5.5 kW (7.48 HP), Mortise and tenon machine with stop, control panel on top, electric feed, year of manufacture 1987, 4 speeds: 3000/4500/6000/9000 rpm with reversible motor, star-delta starter, clockwise/counterclockwise rotation, emergency stop switch. Cedpfx Aezizipsf Ajrd

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, degree of automation: semi-automatic, actuation type: electric, controller manufacturer: Bodor, laser type: fiber laser, Model: C3 Working Area: 3048mm*1524mm Laser Output Power: 40kW/30kW/22kW/20kW/12kW/6kW/3kW/2kW/1.5kW Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Credpfeg D Ntmex Af Aed Max. linkage speed: 110m/min Max. acceleration: 1.5G 1.Active Anti-collision Function Effectively reduce the damage rate of laser heads, help you save maintenance cost. 2.One-click Processing All functions of the system are distributed logically and orderly to achieve fully automatic mass production. 3.No Quiver when Cutting Thin Sheet C Series is capable of cutting edges of thin sheets and ensures no quivering marks. 4.Stretching Aluminum Crossbeam Rigidity increases by 60% Weight goes down by 20% Equipment running speed increases by 50% 5.Welded Bed with Tenon-and-mortise Joint Each frame of bed is welded after mortise-and-tenon joint to achieve better stability and firmness.

Condition: used, Year of construction: 1999, Tenoning spindle 1 St. Number of milling agregates 4 St. Spindle diameter 50 mm Control Weinig PC-Nexus # 7015 Weinig Unicontrol 6 with NC spindles ----- Machine available for inspection while still in operation until September 2026 Summary of technical data (please inquire about any additional accessories included) Item 1: Cross-cut saw ----- > Electronic cross-cut saw, horizontally continuously adjustable > Number of tools: 1 unit > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.0 kW > Laser alignment light for identifying the cut position > NC length stop mounted on the slotting table included; positioning of the cross-cut saw integrated into the control system. > Length 3500 mm Item 2: Tenoning and slotting spindle ----- > Number of tools: variable, infinitely adjustable via NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, infinitely adjustable 254 mm via NC axis > Spindle speed: 3500 rpm > Spindle diameter: 50 mm > Max. tool diameter: 320 mm > Motor power: 11 kW Item 3: 1st profiling spindle (climb-cut and conventional-cut capable) ----- > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Max. tool cutting circle: 232 mm > Motor power: 7.5 kW Item 4: 2nd profiling spindle ----- > Position: vertical right > Number of tools: variable, infinitely adjustable via NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, infinitely adjustable 254 mm via NC axis > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Max. tool cutting circle: 232 mm > Motor power: 11 kW Item 5: Horizontal profile milling unit (top) ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed: 5,850 rpm > Max. tool cutting circle: 130 mm > Axial adjustment range: 2 positions > Radial adjustment range: 2 positions Item 6: 3. Profiling spindle (hardware groove spindle) ----- > Position: vertical, right > Tool clamping length: 160 mm > Axial adjustment range: 3 positions > Radial adjustment range: 2 positions > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm Codpfxezdk Hye Af Aerd > Max. tool cutting circle: 210 mm > Motor power: 3.0 kW Additional features ----- > Network-ready (online capability) > Rebating unit for tear-free rebating > Double-part processing package > Return conveyor system for one-man operation: slat conveyor > Screen-based control system > Angled window processing unit > Electronic angle display for angled windows > Industrial PC, PC control/NEXUS > Excluding machining tools ----- Price of the above-mentioned machine available on request! ----- Optional extra: EUR 6,500.00 Note regarding used tools: We currently have used "Gold" series tools in stock (Stock No. #2790) Window tools (Gold series) for IV78 Wood and IV78 Wood/Aluminum Previously used on a Weinig Unicontrol 10; a jointing cutter is additionally required for use on a Unicontrol 6. Tool set for fixed-stroke or CNC spindle machines (80 mm and 95 mm stroke), (Tool set prepared for IV92 where technically feasible) Wood-aluminum tool set ...

Condition: good (used), Tenon and slotting machine, tenon cutting machine, tenon cutter, slotting rotor, tenon cutting and slotting machine Crodpfx Aob A Ivnof Asd -Recirculating rotor: 3 positions -Length stop -Workpiece tension -Dimensions: 1400/800/H1500 mm -Weight: 560 kg

Condition: new, Year of construction: 2025, A compact design sheet fiber laser metal cutting machine with complete protection Small occupied space balances complete protection and higher safety. Each frame of the cutting machine bed is welded after mortise-and-tenon joint to achieve perfect mechanical property and better stability and firmness. The pull-out cutting machine table, with the electric table optional, saves space occupation and freshen up the user operation experience. Convenient and fast open&close with one click; The laser cutter door is safe and reliable, by using rack-pinion transmission mode combined with self-locking cutting machine system Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. Applicable Material: metal Condition: New Laser Type: Fiber Laser Laser Power: 1500W, 2000W, 3000W, 6000W, 12000W Cutting Area: 1000*1500mm Cutting Speed: 0-100m/min Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Codpjhwv Rnefx Af Aerd Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING