Used Thermal Plate Processor for sale (14,372)

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 3, roller (top) diameter: 150 mm, side roll diameter: 130 mm, working width: 2,050 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, Equipment: cone bending device, documentation/manual, emergency stop, foot remote control, hardened rollers, swiveling upper roller, STANDARD EQUIPMENT - Steel construction main frames - Hydraulic top roll opening head - Movable control panel - Centrally driven rolls powered by electric motor - Hydraulic up/down movement of rear and lower roll - Precision bending with main motor equipped with brake - Conical bending and pre-bending system - Upper and lower roll driven by planetary gearbox - Rear roll ball support system for easier plate handling - Compliance with EU safety directives - High-strength forged steel rolls made of SAE 1050 (CK45) certified steel - Hardened shafts - Digital indicators (2 pcs) - Operating manual OPTIONAL EQUIPMENT - Overhead crane (elevator) for support during large-diameter bending - Hydraulic side supports for large-diameter bending - Ground and polished rolls - Wire grooves on roll ends - NC control unit - Dual-speed operation - Stepless speed adjustment - Ejector system - Hydromotor option TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-Bending: 3/4 mm Bending: 4/6 mm Iodpfx Ajxw D Udsanetr Upper & Lower Roll Diameter: 150 mm Side Roll Diameter: 130 mm Min. Bending Diameter: 225 / 750 mm Motor Power: 2.2 + 1.1 kW Bending Speed: 6 m/min Tank Capacity: 25 l Length: 3800 mm Width: 950 mm Height: 1100 mm Weight: 2250 kg

Condition: used, Year of construction: 1981, sheet width - max. 2535 mm plate thickness 4.0 mm ST plate thickness 2.5 mm VA plate thickness 6.0 mm ALU number of strokes - loaded 20 Hub/min cutting angle 1.7 ° work height max. 900 mm total power requirement 8.5 kW weight of the machine ca. 3400 kg range L-W-H 2916 x 2250 x 1760 mm Machine from training workshop Good/well-maintained condition (!!) Features: - Robust electro-hydraulic guillotine shear “swing cut” - Electric motorized backgauge - Electric cutting length limiter - Electro-hydraulic cutting angle adjustment - Manual cutting gap adjustment - from the front - Front support table incl. recessed handles Itedoxabvqepfx Aanjr - 1x stable side stop, with scale and tilt cam - 3x stable front support arms - 1x freely movable foot switch - Front finger guard - EMERGENCY STOP button at the front - Operating instructions * Special accessories included: - Pneumatic sheet metal holding device for thin sheet metal cuts

Condition: good (used), Clamping plate with T-slots, plate field, welding table, welding table, plate boring machine, T-slot plate, -T-slot plate: clamping plate on a solid base frame with inlet/outlet device -Clamping plate: Ø 600 mm -Groove width: 20 mm -Accessories: incl. 4 holders -Total dimensions: Ø 685 x 825 mm -Weight: 200 kg Itjdpfx Ash It Tyeansr

Condition: new, sheet length: 1.020sheet thickness: 1,5total power requirements: -weight approx.: 450messurements (LxWxH): 2000 x 850 x 1500 Itedpfx Aaod Ab Hbsnor

Condition: new, The KRM ST 20/6, a robust Plate Rolling Machine from KNUTH, is designed for exceptional performance in the category of 3-Roll Motor Plate Rollers. This heavy-duty machine is capable of bending workpieces up to 3000 mm in length, making it ideal for a variety of applications in metalworking, including steel and metal construction. With features like a solid, closed machine frame, a motorized rear roller, and an asymmetrical roll arrangement, the KRM ST 20/6 can handle even the heaviest plates with precision. The crowned and hardened rollers are suitable for processing stainless steel, while the machine boasts a motorized drive powered by a 4 kW electric motor. Control is simplified with a foot switch, and the emergency stop safety rope ensures safe operation. You can trust the central lubrication system for reliable maintenance and operation. For those looking for quality Plate Rolling Machines, the KRM ST 20/6 stands out as a solid investment. Request a quote today to enhance your sheet metal processing capabilities with this exceptional 3-Roll Motor Plate Roller. Itsdpfx Aasqagtionsr

Condition: used, functionality: unexamined, Ferwood Code: RU0007162 - Manufacturer Code: 2-083-02-7400 - Condition: Used - Functionality: Untested - If interested we offer a revision service, contact us. Ijdpowp Nr Uefx Aanetr

Condition: new, Year of construction: 2025, control type: NC control, degree of automation: automatic, actuation type: hydraulic, number of rollers: 3, roller (top) diameter: 180 mm, side roll diameter: 150 mm, working width: 2,550 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, warranty duration: 12 months, Equipment: documentation/manual, emergency stop, foot remote control, STANDARD EQUIPMENT Steel construction main frames Hydraulic top roll opening head Movable control panel Centrally driven rolls powered by motor Hydraulic up/down movement for rear and lower rolls Precision bending with braked main motor Cone bending and pre-bending system Lower and upper rolls driven by planetary gearbox Rear roll ball system for easy sheet movement Compliance with EU safety directives High-strength forged steel rolls made from SAE 1050 (CK45) certified steel Hardened shafts Digital indicators (2 units) Iodpexw D Tmefx Aanotr User manual OPTIONAL EQUIPMENT Top crane (elevator) for support in large diameter bending Hydraulic side supports for large diameter bending Ground and polished rolls Wire grooves on journal ends NC control unit Dual speed operation Stepless speed adjustment Ejector system Hydromotor option TECHNICAL SPECIFICATIONS Bending Length: 2550 mm Pre-bending: 3/4 mm Bending: 4/6 mm Upper & Lower Roll: 180 mm Side Roll: 150 mm Min. Bending Diameter: 270 / 900 mm Motor Power: 4 + 1.1 kW Bending Speed: 5 m/min Tank Capacity: 25 l Length: 4350 mm Width: 1100 mm Height: 1290 mm Weight: 3070 kg

Condition: good (used), functionality: fully functional, Year of construction: 2011, Biko 3128 – Plate Rolling Machine (2011) High-quality 3-roll plate bending machine for professional metal fabrication. Well maintained and ready for work. Technical Specifications Model: Biko 3128 Year of manufacture: 2011 Rolling type: 3-roll, initial pinch Max. plate width: 3100 mm Max. bending capacity: 28 mm (depending on material grade) Top roll diameter: To be confirmed Side roll diameter: To be confirmed Motor power: To be confirmed Control system: Hydraulic, with adjustable side rolls Cone bending capability: Yes Machine construction: Heavy-duty welded frame Safety: Emergency stop & foot pedal control Condition Machine is in very good working condition Regular service history Test run possible Included Foot pedal Hydraulic adjustments Dimensions & Weight (Confirm exact values with seller) Iodpsx Dx Hzjfx Aanotr Length: 5.0 m Width: 1.8 m Height: 1.6 m Weight: 12,000 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2022, sheet thickness steel (max.): 10 mm, cutting width (max.): 3,100 mm, Equipment: documentation/manual, Knife length: 3100 mm Sheet thickness: 10 mm Safety photocells at the rear of the machine NC control system Programmable bumper with a bumper positioning accuracy of 0.1 mm with positioning compensation Special lower and upper blade for cutting ordinary steel (lower four-sided and upper two-sided) Hydraulic clamps for cut sheet metal Chute at the rear of the machine for cut sheets Year 2022 Ijdpfx Aaswgwwysnetr

Year of construction: 2011, condition: used, functionality: fully functional, The plate heat exchanger is build up in modules and therefore flexible with respect to enlargements or reductions. It is easy to change the capacity by respectively enlarging or reducing the number of plates. Iodswcqvzopfx Aanstr

Condition: new, The KRM ST 30/5, a robust Plate Rolling Machine from KNUTH, is designed for exceptional performance in the category of 3-Roll Motor Plate Rollers. This heavy-duty machine is capable of bending workpieces up to 3000 mm in length, making it ideal for a variety of applications in metalworking, steel, and metal construction. With features like a solid, closed machine frame, a motorized rear roller, and hardened rollers, it provides reliable and precise results. The asymmetrical roll arrangement accommodates heavy plates, and its conical bending capabilities are enhanced by an adjustable rear roller. Moreover, it includes a user-friendly separate control panel with a foot switch for easy operation. Maintenance is simplified through central lubrication, ensuring long-lasting functionality. You can take advantage of the KRM ST 30/5 for your plate rolling needs; request a quote now and enhance your sheet metal processing capabilities. Itodpfxoihvtgo Aanor

Condition: ready for operation (used), A high-performance crank plate shear with a low operating hours count is offered. Design: all-steel welded construction, stroke rate: 50 strokes/min, control FM 1S, backgauge manual or motorized (MAH 51/52), pneumatic hold-down device, rear safety light barrier. Inspection possible by arrangement. Itsdpfx Aasx Hfgvjnjr

Condition: good (used), motorized limit stop behind foot switch Technische Daten / technical details: Isdpfx Aaehtq N Nsnotr Schnittleistung (Blechdicke) / max. cutting capacity (thickness of sheet) 6 mm Schnittlänge / max. cutting length 2035 mm Hinteranschlag / arrester behind 1000 mm Ständerweite / distance between columns 2000 Mm Antriebsleistung / drive capacity 11 kW Gewicht der Maschine / weight 3500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: used, mileage: 4,05,000 km, Year of construction: 2006, Serial number: YS2R6X2000201xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21128 Specifications: 2012 model Km: approx. 405,000 6x2 Euro 3 Axle distance: 350/132 cm Snowplow mount Engine brake Suspension: steel Underslung blade Box (see pictures) Tires (see pictures) New heater radiator New engine hoses VBG tow hitch AC/climate Radio/DAB Ready for delivery Description:2006 Scania R500 6x2 tipper truck with snowplow setup, including mount and underslung blade.The owner has a custom start button installed by Scania; sometimes the key won’t turn.The start button works every time.See video.Ready for delivery. Itsdpfxew Raf Hs Aansr Km: 405000 HK: 500 Technical approved: Yes EU-approved until: 09.06.2026 Own weight: 12810 Total Weight: 29000 Payload: 16115 Width: 255 Length: 740 Euro: 3 Model: R500 6x2 brøyterigget tippbil

Condition: used, Little used Niro model MP3/2/3 10 bar stainless steel multi processor fluid bed dryer / granulator / coater. Rated 10 bar over pressure. Unit includes various bowl inserts, spray arms, and air handling system. Itodpfx Ajx Db H Reaner

Year of construction: 2022, condition: used, The panel swivel fix facilitates handling when moving panels from a vertical to a horizontal position. The support frame is hydraulically height-adjustable and also pivots. Support rollers facilitate horizontal movement. Four swivel casters ensure safe movement. Technical data: Support height: • Vertical approx. 340-120 mm • Horizontal approx. 1200-890 mm Max. panel size: 5200 x 2100 mm Load capacity: 250 kg Itsdpfx Aaev T Ilvjnor Storage location: Bad Wimpfen

Condition: new, Year of construction: 2025, – Capacity 2070 × 9 mm (minimum diameter 900 mm) 2070 × 7 mm (minimum diameter 270 mm) Bending capacity 2070 × 7 mm (minimum diameter 900 mm) Iodpjx Hq Dyefx Aanjtr Bending capacity 2070 × 5 mm (minimum diameter 270 mm) – 4 rolls – Hydraulic operation – Hardened rolls – Top roll diameter: 180 mm – Bottom roll diameter: 180 mm – Side roll diameter: 150 mm – Digital display for left roll movement – Digital display for central lower roll movement – Digital display for right roll movement – Top roll hydraulically swing-out – Steel construction made of ST-52 – Hydraulic drop-end system for easy positioning of the rolls – Hydraulic lifting and lowering system for center and side rolls – Hydraulic balancing system – Overload protection – Documentation – 400V

Condition: like new (used), functionality: fully functional, Year of construction: 2024, control type: NC control, degree of automation: semi-automatic, actuation type: hydraulic, controller manufacturer: MG, controller model: 4-AXIS, number of rollers: 4, roller (bottom) diameter: 245 mm, roller (top) diameter: 265 mm, side roll diameter: 185 mm, roller diameter: 280 mm, roller length: 2,550 mm, working width: 2,500 mm, working height: 700 mm, sheet thickness (max.): 14 mm, sheet thickness steel (max.): 12 mm, sheet thickness stainless steel (max.): 10 mm, overall weight: 7,500 kg, total length: 4,200 mm, total width: 1,500 mm, total height: 1,600 mm, power: 18 kW (24.47 HP), input voltage: 380 V, input frequency: 50 Hz, number of digital displays: 3, Equipment: centralized greasing system, cone bending device, documentation/manual, emergency stop, hardened rollers, swiveling upper roller, 4roll plate bending machine 2500 X 12 mm with central support hydraulic for large diameters and side arm plate support Capacity plate width 2500 mm Plate thickness 12 mm Prebend 10 mm Ijdoxw S Eqspfx Aanstr Upper roll 265 mm Lower rolls 245 mm Surface useful on rolls 2550 mm Power supply 380/50 Electric motor 15 Kw on hydraulic unit Configuration Hardened rolls very high surface resistance Conical bending attachment Digital position readout of the rollers Safety and emergency installed per norms Hydraulic rolls power driven with planetary gear unit Hydraulic motion of rollers individual with dual initial pre-pinch Open front drop-end hydraulic to unload the closed shells Central support vertical hydraulic operated for large diameters Side arm operated hydraulic support Total weight of the machine 7500 Kg machine layout 4200X1500 X H1600 mm

Condition: used, total length: 545 mm, total width: 545 mm, drop-through hole in table: 90 mm, Used clamping plates in the following sizes are available for sale: No. 10 / 1100 x 700 mm / through hole 180 x 220 mm / T-slot 28 Iodpovcywvefx Aanetr No. 11 / 1200 x 600 mm / Fold-through hole 220 mm / T-slot 20 No. 12 / 910 x 620 mm / Fold-through hole 130 mm / T-slot 22 No. 13 / 900 x 620 mm / Fold-through hole 250 mm No. 14 / 545 x 545 mm / Fold-through hole 90 mm / T-slot 18 No. 15 / 800 x 507 mm / Fold-through hole 155 mm / T-slot 20 No. 16 / 780 x 600 mm / Fold-through hole 120 mm / T-slot 22 No. 17 / 600 x 520 mm Further information and prices are available on request.

Condition: used, total length: 900 mm, total width: 620 mm, drop-through hole in table: 250 mm, Used clamping plates in the following sizes are available for sale: No. 10 / 1100 x 700 mm / through hole 180 x 220 mm / T-slot 28 No. 11 / 1200 x 600 mm / Fold-through hole 220 mm / T-slot 20 Isdpfevcywisx Aanotr No. 12 / 910 x 620 mm / Fold-through hole 130 mm / T-slot 22 No. 13 / 900 x 620 mm / Fold-through hole 250 mm No. 14 / 545 x 545 mm / Fold-through hole 90 mm / T-slot 18 No. 15 / 800 x 507 mm / Fold-through hole 155 mm / T-slot 20 No. 16 / 780 x 600 mm / Fold-through hole 120 mm / T-slot 22 No. 17 / 600 x 520 mm Further information and prices are available on request.

Condition: used, total length: 800 mm, total width: 507 mm, drop-through hole in table: 155 mm, Used clamping plates in the following sizes are available for sale: No. 10 / 1100 x 700 mm / through hole 180 x 220 mm / T-slot 28 Itsdovcyxyjpfx Aanor No. 11 / 1200 x 600 mm / Fold-through hole 220 mm / T-slot 20 No. 12 / 910 x 620 mm / Fold-through hole 130 mm / T-slot 22 No. 13 / 900 x 620 mm / Fold-through hole 250 mm No. 14 / 545 x 545 mm / Fold-through hole 90 mm / T-slot 18 No. 15 / 800 x 507 mm / Fold-through hole 155 mm / T-slot 20 No. 16 / 780 x 600 mm / Fold-through hole 120 mm / T-slot 22 No. 17 / 600 x 520 mm Further information and prices are available on request.

Condition: used, total length: 600 mm, total width: 520 mm, Used clamping plates in the following sizes are available for sale: Isdpfxovcyyke Aanjtr No. 10 / 1100 x 700 mm / through hole 180 x 220 mm / T-slot 28 No. 11 / 1200 x 600 mm / Fold-through hole 220 mm / T-slot 20 No. 12 / 910 x 620 mm / Fold-through hole 130 mm / T-slot 22 No. 13 / 900 x 620 mm / Fold-through hole 250 mm No. 14 / 545 x 545 mm / Fold-through hole 90 mm / T-slot 18 No. 15 / 800 x 507 mm / Fold-through hole 155 mm / T-slot 20 No. 16 / 780 x 600 mm / Fold-through hole 120 mm / T-slot 22 No. 17 / 600 x 520 mm Further information and prices are available on request.

Condition: used, total length: 780 mm, total width: 600 mm, drop-through hole in table: 120 mm, Used clamping plates in the following sizes are available for sale: No. 10 / 1100 x 700 mm / through hole 180 x 220 mm / T-slot 28 No. 11 / 1200 x 600 mm / Fold-through hole 220 mm / T-slot 20 No. 12 / 910 x 620 mm / Fold-through hole 130 mm / T-slot 22 Itjdpfevcyx Tox Aanjr No. 13 / 900 x 620 mm / Fold-through hole 250 mm No. 14 / 545 x 545 mm / Fold-through hole 90 mm / T-slot 18 No. 15 / 800 x 507 mm / Fold-through hole 155 mm / T-slot 20 No. 16 / 780 x 600 mm / Fold-through hole 120 mm / T-slot 22 No. 17 / 600 x 520 mm Further information and prices are available on request.

Condition: used, total length: 1,200 mm, total width: 600 mm, drop-through hole in table: 220 mm, Used clamping plates in the following sizes are available for sale: Itsdjvcyrtspfx Aanjr No. 10 / 1100 x 700 mm / through hole 180 x 220 mm / T-slot 28 No. 11 / 1200 x 600 mm / Fold-through hole 220 mm / T-slot 20 No. 12 / 910 x 620 mm / Fold-through hole 130 mm / T-slot 22 No. 13 / 900 x 620 mm / Fold-through hole 250 mm No. 14 / 545 x 545 mm / Fold-through hole 90 mm / T-slot 18 No. 15 / 800 x 507 mm / Fold-through hole 155 mm / T-slot 20 No. 16 / 780 x 600 mm / Fold-through hole 120 mm / T-slot 22 No. 17 / 600 x 520 mm Further information and prices are available on request.

Condition: used, total length: 1,100 mm, total width: 700 mm, Used clamping plates in the following sizes are available for sale: No. 10 / 1100 x 700 mm / through hole 180 x 220 mm / T-slot 28 No. 11 / 1200 x 600 mm / Fold-through hole 220 mm / T-slot 20 No. 12 / 910 x 620 mm / Fold-through hole 130 mm / T-slot 22 Iodpfx Aajvcyp Sonstr No. 13 / 900 x 620 mm / Fold-through hole 250 mm No. 14 / 545 x 545 mm / Fold-through hole 90 mm / T-slot 18 No. 15 / 800 x 507 mm / Fold-through hole 155 mm / T-slot 20 No. 16 / 780 x 600 mm / Fold-through hole 120 mm / T-slot 22 No. 17 / 600 x 520 mm Further information and prices are available on request.