Used Thread Cutting Machine for sale (67,211)

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: Custom made, type of input current: three-phase, total width: 1,800 mm, total length: 14,650 mm, input voltage: 400 V, input current: 16 A, cutting width (max.): 1,800 mm, 22 C – Finn-Convey Industrial Spreading Line (14.65 m x 1.8 m) – Complete with Air-Flotation Description For sale is a professional-grade Finn-Convey industrial fabric spreading and cutting table line, offered as a complete production-ready system. This system is designed for efficient fabric spreading and preparation in high-volume cutting room operations. It enables controlled handling of heavy fabric rolls, precise layer alignment, and smooth material flow prior to cutting. The line has been operated as part of a dedicated production setup together with a Bergman cross cutting saw (unit 114 A). This combination allows efficient pre-cutting of fabric rolls into required lengths before spreading, significantly improving workflow efficiency and reducing manual handling. The equipment has been used in a professional garment factory and was operational prior to factory shutdown. Key Technical Specifications • Total length: 14.65 meters (modular structure, adjustable configuration) • Table width: 1.80 meters (suitable for wide fabrics) • Technology: Air-flotation table system for low-friction material handling • Drive system: Motorized side drive units ensuring controlled spreading tension System Components • Finn-Convey motorized side drive units • Industrial air-flotation table structure with perforated surface • Integrated blower system with centrifugal fans under tables • Electrical control cabinet for system operation • Fabric roll handling stands and support assemblies • Integrated end cutting unit with circular blade system Cutting Unit Technical Details • AC speed-controlled motor (Taili Motor Co., Ltd., approx. 90–200W range)14650 • Gear reduction unit (e.g. 5GN-series) for high torque output • Circular cutting blade with integrated sharpening mechanism • Adjustable vertical guide rails for cutting height positioning • Designed for efficient cutting of multi-layer fabric stacks Auxiliary Drive Components • Auxiliary induction motor (e.g. 40W class, speed-controlled) for fine positioning and movement control • Gear-driven transmission for stable and continuous operation • External capacitor-based start system (typical for single-phase auxiliary motors) System Architecture • Modular table construction allowing flexible layout adjustments • Air-assisted material movement reducing friction and operator effort • Cradle-type roll handling enabling tension-free fabric feeding • Encoder-based or mechanical length control depending on configuration • Compatible with upstream roll cutting equipment and manual or semi-automatic workflows Production Advantages • High efficiency with long cutting layouts and reduced material waste • Excellent ergonomics, heavy fabric stacks can be moved with minimal force • Accurate layer alignment supported by controlled drive system • Integrated cutting capability improves workflow continuity Hodpfx Aiey Au Aljrjw • Suitable for a wide range of materials including denim, upholstery, and technical textiles Condition Used industrial condition Removed directly from production after factory shutdown Typical signs of use from industrial environment Inspection possible prior to dismantling Sold as-is, where-is, without warranty Location Valga, Estonia Removal & Transport Buyer responsible for dismantling, loading, and transport Professional dismantling strongly recommended due to system size and electrical installation

Condition: excellent (used), Year of construction: 2017, operating hours: 14,052 h, functionality: fully functional, machine/vehicle number: M15305531R, repeat accuracy: 0.02 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 305 mm, positioning accuracy: 0.07 mm, workpiece weight (max.): 1,450 kg, type of input current: three-phase, input voltage: 380 V, travel speed (max.): 12,500 mm/min, MAXIEM 1530 II machine 30HP pump (22kW) Abrasive tank 1000 kg. In continuous operation, serviced every 500 hours. Hsdpfx Aieyglpcersw

Condition: used, functionality: fully functional, total length: 1,900 mm, total width: 740 mm, total height: 1,290 mm, input voltage: 400 V, Treif Jaguar 700 portioning and slicing machine for sale. Hedpfx Ao Agm Sasirsw

Condition: like new (used), Year of construction: 2020, functionality: fully functional, total width: 1,650 mm, total length: 5,450 mm, total height: 1,900 mm, input voltage: 380 V, input frequency: 50 Hz, overall weight: 1,475 kg, type of input current: three-phase, CAPACITY: 250 pieces/minute max. BAG WIDTH: 80 mm – 800 mm max. BAG LENGTH: 70 mm - 1000 mm FILM THICKNESS: 0.020 mm – 0.100 mm TOTAL ELECTRIC POWER: 13 kW (380 V – 50 Hz) SERVO MOTOR: 4 UNIT PHOTO CELL: 1 UNIT TOTAL AIR SUPPLY: 6 Bar min. MACHINE WIDTH: 1650 mm MACHINE LENGTH: 5450 mm MACHINE HEIGHT: 1900 mm WEIGHT: 1475 kg Hjdpfx Aezd N Ipsirow STANDARD FEATURES - Controlled via a touch operator panel: bag length, number of pieces per bag, production speed, visible number of bags in the package, stop function based on the total count. - Equipped with one photocell. Handles both printed and unprinted bags. - High-speed cutting with precise measurement, achieved through servo motor-controlled pulling rollers. - Strong and high-quality sealing is achieved through a servo motor-controlled sealing jaw. - The servo motor-controlled belt system ensures synchronous operation of the belts with the stacking system. - Servo motor-controlled stacking rollers provide high-quality stacking. - Warp rolls with inverter tension control system. - Pneumatic ballerina system. - Automatic edge control system. - Automatic stop when the roll is empty. - Automatic stop when the photocell print location is incorrect. - Roll bobbin binding diameter: max. 800 mm. - Capable of processing PP, OPP, CPP, High Density Polyethylene (HDPE), and Low Density Polyethylene (LDPE) bags.

Condition: excellent (used), Year of construction: 2014, operating hours: 2,200 h, functionality: fully functional, machine/vehicle number: 1000001927, travel distance X-axis: 3,210 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 200 mm, pressure: 3,800 bar, feed rate X-axis: 45 m/min, feed rate Y-axis: 45 m/min, feed rate Z-axis: 15 m/min, INTERMAC PRIMUS 322 METAL – 5-AXIS WATERJET – YEAR 2014 Approximately 2,200 operating hours | Working area 3,210 × 2,000 mm | BFT Ecotron 38.22 pump | 3,800 bar B&B Waterjet Abrasive offers for sale a used Intermac Primus 322 Metal 5-axis waterjet cutting system, year 2014, complete with a 22 kW BFT Ecotron 38.22 high-pressure pump. The machine is in excellent condition and was disassembled while in working order. It is currently disassembled at our Onara di Tombolo (PD) location, where it can be viewed by appointment. A functional test is not available in its current state. The 5-axis configuration allows for machining with an inclined head, offering greater versatility compared to vertical cutting alone. TECHNICAL DATA • Manufacturer: Intermac / Biesse • Model: Primus 322 Metal – Waterjet • Year of manufacture: 2014 • Configuration: 5 axes, X / Y / Z / A / C • Machine operating hours: approximately 2,200 • Working area X/Y: 3,210 × 2,000 mm • Z-axis travel: 200 mm • A-axis tilt: ±60° • C-axis: continuous rotation • Maximum axis speeds X/Y/Z: 45 / 45 / 15 m/min (not cutting speed) • Allowable load on the table: 1,000 kg/m² HIGH-PRESSURE PUMP • BFT Ecotron 38.22 • Pump motor power: 22 kW • Maximum pressure: 3,800 bar • Maximum flow rate: 2.3 l/min • Pump power supply: three-phase, 400 V, 50 Hz APPLICATIONS Abrasive waterjet cutting of metals, including steel, stainless steel, aluminum, copper, brass, and titanium, as well as stone, ceramics, and non-tempered glass. Thicknesses, speeds, and achievable quality depend on the material and processing parameters. REQUESTED PRICE: €50,000 + VAT The price includes the machine and the BFT Ecotron 38.22 pump. Transport, installation, commissioning, training, and other ancillary services are excluded and can be quoted separately depending on the destination and the customer's requirements. B&B WATERJET ABRASIVE: YOUR WATERJET PARTNER Hjdpfx Ae Aduy Ijirow With over 17 years of experience in the industry, we support the customer from the selection of the system to its daily management. We can assist with installation and commissioning, operator training, technical assistance, and maintenance, as well as the supply of spare parts and abrasives. A single point of contact to guide you through the purchase and support you over time. To receive more information, arrange a visit, or request a quote including the necessary services, please contact us, indicating the installation location and your production requirements. B&B Waterjet Abrasive

Condition: excellent (used), CATALOGUE NUMBER 7393 TECHNICAL DATA Crosscut saw: max. saw blade diameter 350mm spindle 30mm blade adjustable left/right, up/down motor 1.5kW Router: Hsdpfe Af Izcsx Airjw dovetail spindle: spindle diameter 40mm spindle working height 145mm max. router bit diameter 400mm motor 3.7kW side carriage adjustable up/down clamping device on the carriage tabletop + fence with angle adjustment 600x400mm dimensions L/W/H 1700x2050x1260mm weight approximately 500kg ADVANTAGES – made in Germany – very good condition – used router Net price: 7900 PLN Net price: 1840 EUR Net price calculated based on an exchange rate of 4.3 PLN/EUR (in case of significant exchange rate fluctuations, the price may change)

Condition: reconditioned (used), travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 200 mm, warranty duration: 6 months, CARETTA MODULA 4020 – 3-AXIS WATERJET – 4,000 × 2,000 MM – REFURBISHED WITH WARRANTY Available without pump or complete with a KMT Streamline SL-V 50 Classic 50 HP pump. The first year of CAD-CAM IGEMS subscription is included in both configurations. B&B Waterjet Abrasive offers a Caretta Technology Modula 4020 3-axis waterjet cutting machine, with a working area of 4,000 × 2,000 mm, self-aligning gantry, and ECS CNC 1802 numerical control. The machine is supplied with refurbished or new components, a new Dialine cutting head with integrated diamond, and a new abrasive metering unit. CONFIGURATIONS AND PRICES • €40,000 + VAT: machine without high-pressure pump, with the first year of IGEMS subscription included. • €65,000 + VAT: machine complete with a KMT Streamline SL-V 50 Classic pump, with the first year of IGEMS subscription included. From the second year onwards, the IGEMS subscription costs €1,500 + VAT per year. For both configurations, transport, installation, commissioning, training, and other ancillary services are excluded and can be quoted separately. TECHNICAL SPECIFICATIONS • Manufacturer: Caretta Technology • Model: Modula 4020 • Technology: abrasive waterjet cutting • Configuration: 3 axes with self-aligning gantry • Working area: 4,000 × 2,000 mm • Controlled Z-axis, 200 mm stroke • Numerical control: ECS CNC 1802 • Cutting head: new Dialine with integrated diamond • Abrasive metering unit: new • Abrasive tank: 200 liters • Motors and drives: Yaskawa • Guides and slides: INA • Rack: Güdel with helical teeth • CAD-CAM software: IGEMS, first year of subscription included SLUDGE SYSTEM INCLUDED IN BOTH CONFIGURATIONS Provision for a sludge disposal system, with a tank, semi-automatic electrical panel, and diaphragm pump included in the supply. PUMP FOR THE €65,000 + VAT CONFIGURATION • Brand: KMT • Model: Streamline SL-V 50 Classic • Power: 50 HP / 37 kW • Maximum pressure: 3,800 bar • Flow rate at 3,800 bar: 3.7 l/min • Topwork refurbished to new condition • Oil and filters replaced Hedpfxe Ad I U Ej Airew The indicated power refers to the pump, not to the total power consumption of the system. WARRANTY, DELIVERY, AND LOCATION Both configurations include: • 6-month / 1,000-hour warranty, according to the offer conditions. • Delivery expected within 8 weeks from receipt of order. Machine can be viewed by appointment at: Via Campolongo, 81E – 35019 Onara di Tombolo (PD), Italy. B&B WATERJET ABRASIVE – OVER 17 YEARS OF EXPERIENCE We support you from the selection of the machine to after-sales service: installation, commissioning, operator training, maintenance, spare parts, and abrasive supply. Services are quoted based on the requirements and the machine's destination. Contact us specifying the desired configuration, the materials to be processed, and the installation location: we will prepare a customized offer.

Condition: used, Year of construction: 1998, functionality: not functional, machine/vehicle number: 241, travel distance X-axis: 4,000 mm, Tekna TK 145/20 CNC twin head mitre saw. Cutting lenght: 4000mm Blade 500mm Hsdpexrg Susfx Airew

Condition: new, functionality: fully functional, Year of construction: 2025, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, High-strength welding bed Partitioned smoke extraction system Fully automatic butter injection system Fully automatic cutting, material saving, fast speed Cutting area 4000 × 2000 mm X‑axis travel 1520 mm Y‑axis travel 4020 mm Z‑axis travel 80 mm Max. combined positioning speed 170 m/min Acceleration 2.8 G Machine dimensions (L×W×H) 9500 × 2900 × 2380 mm Footprint 10500 × 3400 mm Hodpsw A Iiljfx Airew Net weight 8500 kg

Condition: excellent (used), Year of construction: 2026, operating hours: 100 h, functionality: fully functional, machine/vehicle number: MT1212_2026_36, working range: 1,250 mm, overall weight: 1,400 kg, compressed air connection: 6 bar, total height: 1,610 mm, total length: 2,550 mm, type of input current: AC, warranty duration: 36 months, workpiece weight (max.): 80 kg, table width: 1,250 mm, air pressure: 6 bar, input current: 16 A, table length: 1,250 mm, space requirement height: 1,610 mm, space requirement length: 2,550 mm, space requirement width: 1,770 mm, Equipment: documentation/manual, rotational speed infinitely variable, Multitapper 1212 Automatic Threading Machine CoastOne - Made in Finland Demonstration Machine Machining area: 1250 x 1250 mm Thread sizes: M2-M10 Number of spindles: 3 (optionally 4) 2 thread cutting and forming stations; 1 countersinking and drilling station Micro-lubrication for each spindle/tool station Control: TC15 touchscreen Numeric input, import of punch and NC files Warranty: 36 months after installation Immediately available; subject to prior sale Hsdpfxe Ad Dire Airjw Viewing under power is possible at any time by appointment

Condition: used, Year of construction: 2016, controller model: , _____ Description: Year of manuf. : 2016 Base axis (X) : mm Outrigger (Y) : mm Technical Specifications Working area X/Y:4,000 × 2,000 mm Material support area X/Y:approx. 4,100 × 2,100 mm Hedpfxez S S Efe Airsw Z-axis travel:approx. 150 mm Max. traverse speed:12,700 mm/min Max. contour cutting speed:7,620 mm/min X/Y positioning accuracy:± 0.04 mm/m X/Y repeatability:± 0.05 mm High-Pressure Pump Manufacturer / Model:Flow HyPlex Prime 30 Motor power:22 kW (30 HP) Max. design pressure:4,150 bar Continuous operating pressure:3,800 bar Max. flow rate:3.1 l/min Power supply:400 V / 50 Hz / 3-phase Standard Equipment :-Dynamic Waterjet XD 3D cutting technology, up to 60° head movement :-PASER 4 abrasive cutting system :-Abrasive storage hopper, capacity approx. 285 kg :-Premium stainless steel catcher tank with water level control :-CleanCut material support system :-Flow Shields splash protection :-Safety light curtain :-FlowMaster PC control system Additional Equipment :-Flow UltraPierce piercing assistance system :-DynaBeam laser height sensor :-LaserPointer :-Pure water conversion kit

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, cutting width (max.): 800 mm, stack height: 100 mm, overall weight: 900 kg, type of input current: three-phase, front table length: 1,500 mm, total width: 1,500 mm, input current: 380 A, total length: 1,950 mm, input voltage: 4 V, Equipment: safety light barrier, Robust, programmable guillotine that can be integrated into a workflow, with hydraulic drive and an 18.5” touchscreen display. A barcode reader can be added for automatic job selection. Extensive programming options, with a memory capacity of 1998 programs. The machine frame has enhanced stability and is optimized for high cutting force absorption and maximum cutting precision. The Mohr 80 guillotine is designed for single-shift operation. Precise cutting is achieved hydraulically. This allows the time the blade spends at the bottom dead center to be adjusted to the type of material. The ultra-smooth stainless steel table, equipped with air jets, allows for easy material handling. The press force can be adjusted over a wide range of pressures, adapted to each material via a scaled button. Bright LEDs clearly mark the cutting line for the operator. The machine is operated via an ergonomically positioned control panel with a 18.5" touchscreen display. It can be integrated into a workflow. Cutting data is taken directly from prepress via Compucut® (optional, costing 5,500 euros). Recurring cutting sequences can be memorized (memory capacity of 1998 programs) and adjusted at any time. Technical data PLUS 80: Maximum cutting width 800 mm Maximum feed depth 800 mm Maximum feed height 100 mm Minimum pressure 180 daN Maximum pressure 2,700 daN Ram speed during return (0 - ...) 130 mm/sec Smallest automatic cut without a false plate 15 mm Smallest automatic cut with a false plate 50 mm Hjdpfx Aoyrqnhoirjw Dimensions MOHR 80 PLUS (w × d × h) 1,500 × 1,970 × 1,500 mm Total weight 900 kg Electrical power supply (apparent power) 4.0 kVA Includes 2 HHS blades. Includes left and right tables. Includes light curtain. Includes 1 additional carbide blade. Includes 1 additional PREMIUM carbide blade. Compucut® with P-Net Connect (original optional purchase cost was €5,050.00)

Condition: good (used), EBA 721-06 LT Paper Cutting Guillotine The machine has been serviced and is ready for operation. This professional cutter is designed for high-performance cutting. This model offers excellent value for money. The guillotine, with a 721 mm knife length, is equipped with infrared safety curtains, a hydraulic pressure device, and an electromechanical cutter bar drive. Standard equipment also includes a programmable timer and electronic saddle position readout with an accuracy of 1/10 mm. The machine’s main work table is made of stainless steel with a blower. Technical data: Cutting length 721 mm Infeed height 78-80 mm Infeed depth 720 mm Power supply 400 V Weight 620 kg Key features: Electromechanical knife drive, Hydraulic clamp, Fully adjustable cutting force (250-2000 kg), Hedpfx Ajz Icz Ieirsw Optical cutting line indicator, Air table (on front and rear tables), Pedal for pre-marking the cutting line using the clamp or optical cutting indicator, Solid, adjustable steel knife carrier, Blade made of high-quality HSS steel. Safety features include: „Safety curtain” – a photocell in the front table, Transparent safety cover on the rear table, Safe drive – IDEAL patent, Electronically controlled two-handed cutting start, Automatic knife return from any position, Main switch equipped with a key switch. Key-operated Knife replacement possible with the blade permanently covered The set includes: a safety knife change tool, operating tools, a paper tapping tool, and a spare knife.

Condition: used, functionality: fully functional, Year of construction: 2002, In good technical condition and fully functional. Year of manufacture: 2002 Pressing force: 1300 kN Maximum stroke: 215 mm Hjdo Afxf Dspfx Airow Weight of the press: approx. 11,250 kg.

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 31,621 h, machine/vehicle number: A0221E1033, table length: 3,000 mm, table width: 1,500 mm, Power: 3000 W Work area size: 3000x1500 mm Further details can be found in the images, and it comes with a commissioning guarantee. Hsdpfxozzyl Hj Airow

Condition: used, Year of construction: 2008, Technical details: x-travel: 3002 mm y-travel: 2002 mm z-travel: 200 mm total power requirement: 9 kW cutting speed: 40 m/min high-pressure pump: max. 4.000 bar weight: ca. 5.800 kg dimensions: 3800 x 2900 x 2200 mm mm waterjet cutter, for cutting of miscellaneous materials, like f.e. Aluminium, Stainless steel, plastic ... accuracy: repeat accuracy (new machine) +/- 0.1 mm accessories: Sand (several pallets) Hjdj Adr Ayepfx Airew *

Condition: good (used), Perfecta 168 TS paper guillotine The machine is in very good condition and ready for production. Year of manufacture: 2010. Available immediately from stock. The guillotine can be used as a standalone unit or integrated into cutting systems. Program creation is handled via the menu and covers a wide range of cutting tasks, such as single cuts, custom programming, multiple cuts, clamping without cutting, and automatic transfer of actual values. Perfecta premium-class paper cutters are manufactured in Bautzen, Germany. Distinguishing features of Perfecta machines: – Interactive user interface – 18.4” touchscreen – USB interface – Ethernet interface – Windows CE operating system – CIP data module – Positioning via an electronic handwheel – Optimized cutting cycle – Programmable clamp pressure – Automatic adjustment of clamp pressure based on cutting width – Automated front-access knife change – Quick-change knife system – New, single-piece cast machine frame for increased stability – Maintenance-free electromagnetic clutch Technical specifications: Hsdez S Uy Eepfx Airsw Cutting length: 1680 mm Maximum pile height: 165 mm Insertion depth: 1680 mm Minimum cut with false clamp plate: 77 mm Minimum cut without false clamp plate: 26 mm Maximum backgauge speed: 300 mm/s Backgauge guidance: above the work table Main motor power: 7.5 kW Net weight: 6900 kg The machine comes equipped with a spare knife, a paper jogger, a false clamp plate, documentation, and a set of tools.

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: 6740, type of input current: three-phase, total height: 2,600 mm, total width: 4,200 mm, distance table to spindle center: 2,300 mm, operating pressure: 4,000 bar, Product Waterjet Cutter Brand Resato Type R-LCM 3015-1 Measurements L x W x H approx. 420 x 260 x 230 cm Year 2006 Specifications with a Resato PJE-2-400 high-pressure pump, max. operating pressure 4,000 bar, 2 liters/minute, 19 kW. Please note! The high-pressure pump is mounted at a height of approx. 257 cm; the fencing will need to be professionally removed and subsequently reinstalled. Clemco sandblasting machine, model 2452, manufactured in 2006, 200-liter central control unit with display Hsdpfx Ao Agu N Ajirsw . Please note! The unit is still filled with water; the buyer must drain it themselves. Details Please note: The high-pressure pump is mounted on a container (approx. 240 cm high); the container is NOT included in the lot . Please note! The power supply must be professionally disconnected. The buyer must provide their own hoisting and lifting equipment and have the machine professionally removed from the premises.

Condition: ready for operation (used), Year of construction: 2012, machine/vehicle number: 236 C 272, Laser cutting machine Prima Power Domino, Serial No. 236 C 272, year of manufacture 2012 with - Laser source CX3000, Serial No. 110015, year of manufacture 2011 - Control system Prima Electronics P20L-OI - Industrial cooling unit Hyfra SVK320-1-S, Serial No. 11040530, year of manufacture 2011 - Absorption dryer Hsdpfx Asz Nqh Hjirew Further information can be found under "Visit the auction".

Condition: repair required (used), Year of construction: 2008, functionality: not functional, machine/vehicle number: 06-13633, Technical characteristics: Work Area - Elevation: 160 mm - Minimum center distance between table axis and spindle: -30 mm - Maximum center distance between table axis and spindle: +150 mm - Minimum distance between table surface and cutter spindle: 275 mm - Maximum distance between table surface and cutter spindle: 345 mm - Manual transverse movement of the column: ±20 mm - Maximum workpiece external diameter: 250 mm - Bore diameter: 100 H7 mm Workpiece Specifications - Maximum nominal module (for steel with an approximate tensile strength of 600 N/mm²): 3 mm - Minimum pitch diameter (internal gearing): 60 + d0s mm, where d0s is the external diameter of the cutter (in mm) - Maximum external diameter (internal gearing): 280 mm - Maximum band (toothed area) width: 42 mm - Maximum stroke length for toothing: 50 mm - Maximum spindle travel: 70 mm Load Capacity - Maximum load supported by the table (including fixtures): 150 kg - Maximum force exerted by the tailstock: 1,500 kg - Maximum attainable helix angle (with hydrostatic guide): ~45° Cutter Spindle - External diameter: 85 mm - Cutter holder bore: 45 H3 mm Electrical Equipment - Operating voltage: 400 - 480 V - Control voltage: 24 V - Magnetic voltage: 24 V - Cable cross-section: 16 mm² - Connected power: 15 kW - Protection: 50 A Hedpfexwl Tzex Airow Dimensions - Overall dimensions: Length = 2980 mm, Width = 1650 mm, Height = 2165 mm - Weight: 5700 kg Main Features and Capabilities: - Vertical Design: Optimized for chip evacuation and easy loading/unloading - Control: Siemens Sinumerik 810D/840D - High Precision: Positioning accuracy via Heidenhain linear scales - Measurement system: Marposs T25 (for angle alignment or zero-point rotation definition) - Oil filtration and cooling system - Magnetic chip conveyor Machine Status: NOT WORKING: NC does not start

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 380 V, input frequency: 50 Hz, travel distance X-axis: 6,000 mm, workpiece weight (max.): 1,000 kg, laser power: 20,000 W, pipe diameter (max.): 6,000 mm, Equipment: cooling unit, safety light barrier, Max. Length of Tube: 6m Cutting Capacity of Round Tube: Φ360mm Cutting Capacity of Square Tube: Φ360mm Max. Load: 1000kg Zero Waste Cutting Full stroke movement, capable of cutting both ends of the pipe, improving material utilization Hedpfjv D T H Tex Airsw Full Pipe Cutting available Standard auxiliary loading and unloading system loading, unloading, and cutting of 6m full pipes available Bevel Cutting Function available Bevel angle adjustable from 0-45° Capable of V, X, Y, K type bevel cutting Optional Automatic Loading and Unloading Saves labor costs, and increases production efficiency Intelligent production for high efficiency

Condition: good (used), Polar Mohr 92 XT Paper Guillotine The machine is in very good condition, fully serviced, and ready for production. Polar Mohr is the most highly regarded brand of paper guillotines; this model is their flagship product. Technical specifications: Cutting width: 920 mm Stack height: 130 mm Programmable controller with a 15″ color touchscreen display Air table Safety light curtains (photocells) Chrome-plated table surface Ball-screw drive for the backgauge Optical cutting line Extended side tables Knife change system operated from the control panel Hsdsz S Uylopfx Airow Weight: 2000 kg Power supply: 380V Includes documentation, a tool kit, a jogger block, a spare knife, and one knife installed in the machine.

Condition: used, functionality: fully functional, machine/vehicle number: 82415, type of input current: three-phase, total width: 1,500 mm, total length: 2,500 mm, input voltage: 400 V, input current: 16 A, cutting height (max.): 100 mm, 114 A – BERGMAN & JOHANSSON 420 Bandknife Fabric Cutting Machine – Industrial Precision Cutting Unit Description For sale is a Bergman & Johansson industrial bandknife fabric cutting machine, model Type 420, manufactured in Sweden. This machine is designed for high-precision cutting of stacked textile materials using a continuous vertical bandknife system. It is a core component in professional garment cutting rooms, especially suited for detailed shaping of components such as collars, sleeves, and smaller pattern pieces. The system has been used as part of a dedicated cutting workflow together with Finn-Convey spreading tables (unit 22 C), enabling efficient transition from fabric spreading to precision cutting. The long-arm C-frame construction allows handling of large fabric stacks, while maintaining excellent control and cutting accuracy. The machine was in production use prior to factory shutdown and has been serviced on 27.02.2026. Technical Details • Manufacturer: Bergman & Johansson i Borås AB, Sweden • Model: Type 420 • Band length: approx. 4200 mm • Serial number: 82415 • Machine type: Industrial bandknife fabric cutting machine Motor Specifications • Manufacturer: Leroy-Somer • Type: LS 80 P • Power: 0.75 kW • Speed: approx. 1410 rpm • Voltage: 380–400 V (3-phase, star connection) • Current: approx. 2.0 A (Y) / 3.45 A (Δ) • Frequency: 50 Hz • Protection class: IP54 Machine Features • Continuous vertical bandknife for precision cutting • Long-arm (C-frame) design for large cutting areas • Integrated cutting table with smooth surface • Adjustable blade guard for safety and accuracy • Built-in sharpening system for continuous blade maintenance • Heavy-duty industrial construction • Mobile base with wheels for flexible positioning Cutting Capabilities • High-precision cutting of multi-layer fabric stacks • Suitable for both straight and complex contour cutting • Ideal for detailed garment components and templates • Clean and accurate cuts across various textile types System Characteristics • Table-based cutting process, material is guided manually Hodpfey Au Hqox Airjw • Optional air table functionality (depending on configuration) to reduce friction • Stable blade tracking and tension system for consistent performance • Designed for continuous industrial operation Condition Used industrial condition Serviced on 27.02.2026 Machine was operational prior to factory shutdown Typical wear consistent with industrial use Inspection possible prior to dismantling Sold as-is, where-is, without warranty Applications • Precision cutting of fabric stacks • Garment component cutting • Denim and workwear production • Textile cutting rooms • Small to mid-scale production setups Location Valga, Estonia Dismantling & Transport Buyer responsible for dismantling and transport Professional dismantling recommended

Condition: used, Year of construction: 1998, Wire-cut EDM machine Manufacturer: FANUC Model: ROBOCUT ALPHA-0C Year of manufacture: 1998 Control system: FANUC Series 16-W Technical details: Control system: FANUC Series 16-W X-axis: 320 mm Y-axis: 220 mm Z-axis: 180 mm U-axis: 120 mm V-axis: 120 mm Rapid traverse (X): 900 mm/min Rapid traverse (Y): 900 mm/min Rapid traverse (Z): 450 mm/min Rapid traverse (U): 450 mm/min Rapid traverse (V): 450 mm/min Hedezrh N Uopfx Airew Max. workpiece weight: 250 kg Machine weight: approx. 1.5 t Connected load: 11 kVA Additional information: In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to technical changes, errors, and prior sale.

Condition: good (used), Mohr 66 ECO Polar Guillotine Year of manufacture: 2016. Machine ready for production, fully serviced, in like-new condition. Mohr Polar is the most recognized and highly regarded brand of paper guillotines worldwide. Made in Germany. Working width: 660 mm Stack height: 80 mm Machine weight: 620 kg Hedoz S Uzpspfx Airjw Power supply: 380 V Equipment: Programmer with a 5.5” display and the capacity to store 198 programs in memory Chrome-plated table Safety light barriers (photocells) Intuitive operation Documentation, tools, etc.