Used Thread Wuerling for sale (2,395)

Condition: used, shaft length under head: 80 mm, thread length: 58 mm, GW 63 / GW 63SX flat-die thread rolling machines, various models, good condition, top-of-the-line electrical system EW Menn including vibratory feeder, Skako, and slide conveyor Bsdpfx Aiswkqvqerodi

Condition: used, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Maximum rolling force: 24 tons Maximum tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Maximum tool/reception length: 180 mm Maximum workpiece diameter: 50 mm Hydraulic motor power: 3 kW Bdjdpjuz If Nsfx Airei Roll drive motor power: approx. 5.5 kW Electrical connection: 400 Volt, 50 Hz, 10 kW - Pivotable roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox shift - Hydraulic unit integrated in the machine base - Operating manual with electrical schematic Space requirements (L x W x H): 2,000 x 1,450 x 1,900 mm Weight: approx. 3 tons Very good condition Plunge Rolling: The thread rolling tools, having the same pitch as the workpiece, form the thread by penetrating the workpiece up to the nominal diameter. The maximum thread length is limited to the width of the rolling dies. Through-feed Rolling: Used when the thread length is greater than the width of the rolling dies. Through-feed tools are divided into three sections – entry, calibration, and exit. Knurling rolls have no pitch and are swiveled at the lead angle corresponding to that of the profile to be rolled. Lead angle rolls differ from knurling rolls by having a pitch in the profile. The sum of the lead angle and swivel angle results in the effective lead angle in the workpiece.

Condition: good (used), Year of construction: 1956, machine/vehicle number: 5866, POLYGRAPH thread sewing machine 39 3/4 /2, machine number 5866, working width 39 cm, year of manufacture 1956, in good condition, immediately available. Bedpfx Aiexbzgxerodi If interested, we will also be happy to inform you about other machines in our inventory. You are welcome to inspect the machine at our premises by prior appointment.

Condition: new, thread dia. bis M 36 turning speeds max. 150 U/min thread M5 - M36 working area 2050 Rmax. work height max. 900 mm table surface area 700 x 900 mm Bdedpoy Umd Eofx Airoi oil volume 100 l engine output 4.0 kW weight - pallet system 320 kg equipment: - electro-hydraulic tapping machine - Large working range (max. radius 2050 mm) * Smooth swivel movement, e.g. due to built-in gas pressure dampers - Mobile machine base frame * Oil tank hydraulic unit integrated in the base frame * Hydraulic pressure gauge - Vertical / horizontal thread cutting possible - Connection cable with 16A plug * Special accessories included in the scope of delivery : - Tap quick-change inserts according to "DIN 376" . M05 / M06 / M08 / M10 / M12 / M14 / M16 / M18 / M20 / M 22 . M27 / M30 / M33 / M36 - Infinitely variable speed adjustment incl. digital display - Minimum quantity lubrication (spray oiler/compressed air) - T-slot clamping table - Tapping head can be fixed with magnetic quick-action insert

Condition: good (used), Thread cutting head, thread cutting chuck, thread chuck, tap chuck, milling tool, thread cutting apparatus -Manufacturer: Pittler, self-opening thread cutting heads 2 pieces -Type: Model A No 3d L485 -Size: M7 x 1.25 1 piece -Size: Ø 24 mm recording MK4 1 piece Bdsdporvldujfx Airoi -Price/tax: complete -Transport dimensions: 180/140/H310 mm -Weight: 8.5 kg

Condition: new, Year of construction: 2024, thread dia. bis M 16 mm turning speeds 0 - 600 U/min thread M5 - M16 Bdsdou Ag Raspfx Airji working area 2050 Rmax. working area 500 Rmin. table surface area 900 mm engine output 3,0 kW weight ca. 250 kg

Condition: excellent (used), Year of construction: 1999, Drilling capacity (steel): 18mm Drilling capacity (cast): 23mm Thread cutting (steel): M14mm Spindle holder: MK 2 Spindle stroke: 100mm Extension: 250mm Bdjdpfxokytxzo Airoi Column diameter: 90mm Power: 0.55 kW Spindle speed: 125 – 2400 RPM / 225 – 4300 RPM

Condition: new, THREAD ROLLING ROLLERS Bdodpfx Aezdv Trsirji

Condition: used, Year of construction: 1973, functionality: fully functional, machine/vehicle number: M14L/9094, Offer Number: M14L/9094 Machinetype: thread rolling machine - flat die Info: vibratory feeder Make: MENN Type: GW32 Constr. year: 1973/2000 diameter range: 1,6-4 mm shaft length under head: 50 mm Bdjdjzwqh Repfx Airsi max. thread length: 30 mm output pieces/min: 300-750 Location: In our warehouse

Condition: used, Thead Roller TLM RP8 TLM TORTONA Year: 1995 Bdjdpfxox Aqprs Airoi Diameter range: 3-8 mm Shaft length under head: 90 mm Max. thread length: 52 mm Dies size:130/115x54

Condition: new, Year of construction: 2026, CORMAK RGE36PWx1200 Electric Tapping Machine The CORMAK RGE36PWx1200 electric tapping machine is an advanced tool designed for efficient and precise thread cutting in industrial environments. It is ideal for both large production facilities and smaller workshops. Thanks to its innovative design and modern technologies, this tapping machine provides exceptional reliability, high operating speed, and minimizes the risk of errors and inaccuracies during the threading process. Main advantages of the CORMAK RGE36PWx1200 Electric Tapping Machine High-precision tapping: Thanks to the use of a servo drive and a tapping arm, the machine ensures excellent accuracy and repeatability when cutting threads in various materials. High efficiency: The tapping arm enables fast and effective thread cutting, significantly reducing operation time compared with traditional manual tapping methods. Modern control panel: The touchscreen control panel allows easy adjustment of parameters such as spindle speed, tapping depth, and thread direction. The interface is available in two languages: Polish and English. Tool cooling system: The standard micro-spray lubrication system effectively cools the tap, reduces lubricant consumption, and extends tool life. Improved working efficiency: The chip blow-off system effectively removes chips, improving visibility of the workpiece and increasing operator comfort. Universal application: With a wide tapping range from M6 to M36, the machine is an ideal solution for various industrial applications. Design and technology of the CORMAK RGE36PWx1200 tapping machine The CORMAK RGE36PWx1200 was designed for intensive operation in demanding industrial conditions. Its construction provides high resistance to wear and ensures long service life. The servo-driven tapping mechanism operates smoothly and reliably, while the tapping arm allows precise tool positioning. The rotating motor assembly enables thread cutting at different angles, increasing the versatility of the machine. Key construction features of the CORMAK RGE36PWx1200 include: Tapping arm with quick-change tool holder, allowing fast and secure installation of taps. Adjustable overload clutches, providing protection against excessive loads and preventing tool damage. Robust machine construction with a micro-spray lubrication system ensuring effective tool cooling. Standard equipment of the CORMAK RGE36PWx1200 tapping machine Touchscreen control panel: Enables easy programming of tapping parameters such as speed, direction of rotation, and thread depth. Rotating tapping arm: Allows thread cutting at any required angle. Tap holders with overload clutches: Protect the machine against excessive loads and ensure long-term durability. Micro-spray lubrication system: Provides continuous tool cooling with minimal coolant consumption. Chip blow-off system: Removes chips and improves visibility during tapping operations. Bdedpfxjycdcgj Airsi Technical specifications of the CORMAK RGE36PWx1200 tapping machine Parameter Value Power 2 kW Power supply 230 V Weight 56 kg Maximum arm reach 1200 mm Maximum spindle speed 125 rpm Included in the set: Tap holders covering the range from M5 to M36. The machine is supplied without a workbench, vice, and taps.

Year of construction: 2011, condition: used, 32 mm direkt 1:1,25 angle adjustable from - to -20/ +20 Grad weight 17,0 kg dimensions 180 x 120 x 260 mm mm Threaded swivel apparatus with two driven toolholders in well condition. For Maier swiss lathe Bsdpfxswa Uf Us Airedi - Price of a new one: 16.100,-- € - prepared for two driven toolholders straight 2-020-W10-1001 (not included) - Angle-adjustable threaded swivel head

Condition: new, Year of construction: 2026, CORMAK RGE36PWx1700 Electric Tapping Machine The CORMAK RGE36PWx1700 electric tapping machine is an advanced thread-cutting device designed for both large production facilities and smaller workshops. This tapping machine significantly reduces thread machining time, increasing work efficiency and improving the precision of manufactured threads. It has been developed to provide high reliability, ease of operation, and versatility across a wide range of industrial applications. Main advantages of the CORMAK RGE36PWx1700 Electric Tapping Machine High precision and fast tapping: Thanks to the powerful servo drive and tapping arm, the machine ensures accurate thread cutting in a short time, which is essential for serial production. Easy operation: The machine is equipped with a touchscreen control panel available in Polish and English, allowing simple adjustment of tapping parameters such as spindle speed, tapping direction, and thread depth. High flexibility: The tapping arm enables thread cutting at various angles, while the rotating motor assembly allows precise positioning of the machine for different applications. Efficient cooling system: The micro-spray lubrication system cools the tools with minimal lubricant consumption, extending tool life and reducing material waste. Bjdpfoycdhpjx Airsdi Comprehensive equipment: The tapping machine includes a chip blow-off system, improving visibility of the workpiece and increasing overall work efficiency. Design and Technology of the CORMAK RGE36PWx1700 Tapping Machine The CORMAK RGE36PWx1700 features a robust construction designed for efficient and precise tapping in various industrial environments. The machine is powered by a servo drive, ensuring reliable operation and accurate control of tapping parameters. Thanks to the tapping arm and rotating motor assembly, the machine can perform threading in a wide range of materials, including steel, stainless steel, aluminium, and non-ferrous metals. The tapping arm is equipped with a quick-change tool holder, allowing fast and convenient installation of taps. Adjustable overload clutches integrated into the tap holders provide additional tool protection during operation. This system also allows precise adjustment of torque settings, ensuring accurate and repeatable tapping results. Standard Equipment of the CORMAK RGE36PWx1700 Tapping Machine Touchscreen control panel: Enables easy programming of tapping parameters such as spindle speed, tapping direction, and thread depth. Rotating tapping arm: Allows thread cutting at any required angle. Tap holders with overload clutches: Protect the machine against excessive loads and ensure long-term durability. Micro-spray lubrication system: Provides continuous tool cooling with minimal coolant consumption. Chip blow-off system: Removes chips and improves visibility during tapping operations. Technical Specifications of the CORMAK RGE36PWx1700 Tapping Machine Parameter Value Power 2 kW Power supply 230 V Weight 56 kg Maximum arm reach 1700 mm Maximum spindle speed 125 rpm Included in the set: Tap holders covering the range from M5 to M36. The machine is supplied without a workbench, vice, and taps.

Condition: good (used), Thread cutting machine, pipe thread cutter, thread cutting head, thread cutting chuck, thread chuck, thread cutting apparatus -Manufacturer: Rems, thread cutting head -Pipe size: 2 1/2 to 4 inches -Spindle bore: dimensions see pictures -Dimensions: 410/400/H340 mm Bdjdpswq Nviofx Airei -Weight: 50 kg

Condition: good (used), Thread cutting machine, pipe thread cutter -Manufacturer: Ridgid, thread cutting machine type 535 -Pipe size: 1/8 to 2 inches -Spindle bore: Ø 64 mm -Operating voltage: 230 volts Bsdpfx Aewub Ekoirsdi -Dimensions: 1080/700/H1140 mm -Weight: 128 kg

Year of construction: 2000, condition: excellent (used), Thread cutting machine make ROTHENBERGER TYPE:3S-G year of construction ca.2000 Without cutting head with pipe cutter and end burr device. Bdsdjmn Thhjpfx Airei Runs with V230 current. In top condition, like new.

Condition: new, Year of construction: 2026, CORMAK RGE30PW Electric Tapping Machine The CORMAK RGE30PW electric tapping machine is an innovative industrial tool that revolutionizes the process of thread cutting in various materials. Using the latest technologies, the RGE30PW enables fast, precise, and efficient tapping in both large production facilities and small workshops. Thanks to the servo drive and modern control system, this machine significantly accelerates the entire tapping process while ensuring exceptional reliability and high-quality threads, making it an essential tool in any production environment. Main advantages of the CORMAK RGE30PW Electric Tapping Machine High efficiency: Equipped with a powerful servo drive, the CORMAK RGE30PW provides fast and accurate tapping, significantly reducing operation time compared with traditional manual methods. Precise thread cutting: The rotating arm and easy adjustment of tapping parameters such as spindle speed, tapping direction, and thread depth guarantee excellent thread quality while maintaining a precise 90° working angle. Wide range of applications: The tapping machine can process various materials, including steel, stainless steel, aluminium, and non-ferrous metals, making it suitable for many industrial sectors. Intuitive control panel: The machine features a modern touchscreen control panel that allows easy programming of operating parameters, with menu languages available in Polish and English. Rotating tapping arm: This function enables easy and precise thread cutting at any angle, significantly increasing flexibility in various applications. Cooling and chip removal system: The integrated micro-spray lubrication system cools the tools, extending their service life, while the chip blow-off system effectively removes chips and improves visibility of the workpiece. Design and Technology The CORMAK RGE30PW electric tapping machine was designed with a focus on efficiency, precision, and durability. It is a robust device providing long-term, trouble-free operation even under intensive working conditions. Key components, including the tapping arm, have been engineered to ensure exceptional stability and accuracy during tapping operations. Standard Equipment of the CORMAK RGE30PW Tapping Machine Touchscreen control panel: Allows easy programming of tapping parameters such as spindle speed, tapping direction, and thread depth. Rotating tapping arm: Enables thread cutting at any required angle. Tap holders with overload clutches: Protect the machine against excessive loads and ensure long service life. Micro-spray lubrication system: Provides continuous tool cooling with minimal coolant consumption. Chip blow-off system: Removes chips and improves visibility during tapping operations. Technical Specifications of the CORMAK RGE30PW Tapping Machine Parameter Value Power 1.2 kW Power supply 230 V Weight 50 kg Maximum arm reach 1200 mm Bedpfxeycdale Airsdi Maximum spindle speed 200 rpm Included in the set: Tap holders covering the range from M5 to M30. The machine is supplied without a workbench, vice, and taps.

Condition: used, Thread cutting head, thread cutting chuck, thread chuck, tap chuck, milling tool, thread cutting apparatus -Manufacturer: WMW, self-opening thread cutting heads type A2 13 pieces -Size: M16 x 1.75 recording MK3 2 pieces -Size: M10 x 1.5 1 piece -Size: Ø 17 mm 10 pieces Bodpfx Asru Ra Sjirjdi -Price/tax: complete -Transport dimensions: 400/250/H270 mm -Weight: 22 kg

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 1028, Thread Rolling Machine LEISTRITZ RT 400-CCA Year of manufacture: 2004 / Control system retrofit in 2019 Connection voltage: 3x400 V Frequency: 50 Hz Bdedpsxytmhofx Airoi Rated power: 65 kW Main fuse: 125 A Operating pressure: Air: 6 bar, Oil: 270 bar Control voltage: 24 VDC Maximum shaft length: 275 mm Minimum shaft length: 125 mm Maximum roll set diameter: Tool Ø69.85: 215 mm, Tool Ø80: 210 mm Minimum roll set diameter: Tool Ø69.85: 176-178 mm, Tool Ø80: 176 mm Maximum rolling force: 40 t Space requirement: 3.4 m x 2.9 m x 2.2 m Weight: 4900 kg Accessories: - Coolant filtration system - Second spindle pair (1x for tools Ø69.85 mm, 1x for tools Ø80 mm)

Condition: new, metric thread diameter (min.): 3 mm, metric thread diameter (max.): 16 mm, overall weight: 500 kg, feed length X-axis: 3,000 mm, feed length Y-axis: 1,500 mm, feed length Z-axis: 200 mm, torque: 24 Nm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 50 rpm, power: 0.005 kW (0.01 HP), The CMA 3-axis controlled tapping center is designed for the post-processing of laser-cut sheet metal parts and complete processing of small parts and tubes, for example. The machine offers the following processing options: - Thread cutting - Drilling (standard / with chip breaking / hollow profile cycle) - countersinking - Flow drilling (with optimum feed curve) - reaming - Simple graphical programming - Import of 2D DXF or DWG files - Machine table according to System 28 (similar to Demmeler and Siegmund welding tables, among others) Bsdpfjrbz T Nex Airjdi - Radial compensation of the tool by means of patented tool holder (accessory) - Tool probe for length measurement and as a breakage detector - Intuitive safety system using light barriers Standard version: Automatic tool changer with 10 positions, mounted on the machine portal

Condition: used, Internal threading machine HAGEN & GOEBEL type HG 10 Bjdpfsupbf Dsx Airedi Tapping machine, Vertical tapping machine Machine. No. 4462 Year of construction approx. 1980 Cutting capacity in steel M3 to M10 Cutting capacity in cast iron M3 to M16 Cutting capacity in brass M3 to M18 mm throat depth 250 mm Pinol stroke 80 mm Table size 340 x 240 mm Spindle speed 200-1000 rpm 6 steps Motor power 0.55 and 0.75 kW Mains connection 380 Volt, 50 Hz - 6 speed levels through 2 motor speeds and 3 belt levels - Thread pitch via guide cartridge - 2 guide cartridges with 1.0 mm and 1.25 mm thread pitch - Spindle holder with cone Ø 14.8 to 16 mm and 4 mm keyway - Table height adjustment with toothed rack via hand crank on the round column - Quick-change tapping chuck size 1, Ø 19 mm Space requirement L x W x H 850 x 550 x 1800 mm Weight 255 kg Good condition

Condition: excellent (used), max. workpiece diameter 400 mm threading length 1000 mm max. module 4 (8) min. module 1 clamping length max. 850 mm weight of the machine ca. 3,1 t dimensions of the machine ca. 3,1 x 1,1 x 1,6 m Bsdpfxezmapij Airedi

Condition: good (used), overall weight: 2,300 kg, spindle diameter: 0 mm, total height: 1,375 mm, total length: 1,645 mm, total width: 1,520 mm, One - Good used Profiroll Model UPWS 16 - 16 ton Hydraulic Thread Rolling Machine with swivelling spindles for in-feed or thru-feed rolling. Max threaded dia. 70mm Min. threaded dia. 3mm, Max width in=feed rolling: 150mm, rolling spindlle dia.: 69.85mm power of main motor: 6.5 kw Bdsdpezt R T Eofx Airoi Complete with coolant equipment, work rest blade holder and five sets of thread dies.

Condition: new, thread dia. bis M 24 turning speeds max. 280 U/min thread M5 - M24 working area 2050 Rmax. work height max. 900 mm table surface area 700 x 900 mm oil volume 100 l engine output 3.0 kW weight - pallet system 280 kg Equipment: - electro-hydraulic tapping machine - Large working range (max. radius 2050 mm) * Smooth swivel movement, e.g. due to built-in gas pressure dampers - Mobile machine base frame * Oil tank hydraulic unit integrated in the base frame * Hydraulic pressure gauge Bedpfx Asy Umdljirodi - Vertical / horizontal thread cutting possible - Connection cable with 16A plug * Special accessories included in the scope of delivery : - Tap quick-change inserts according to "DIN 376" . M05 / M06 / M08 / M10 / M12 / M14 / M16 / M18 / M20 / M22 - Infinitely variable speed adjustment incl. digital display - Minimum quantity lubrication (spray oiler/compressed air) - T-slot clamping table - Tapping head can be fixed with magnetic quick-action insert

Condition: excellent (used), Tapping attachment Efem No.1 for internal thread Mounting MK 2 Bjdetqlq Ejpfx Airedi Tapping head Adjustable slip clutch Thread M3 - M10 Mechanical condition very good optically there are traces of storage