Used Tightening Bolts for sale (1,892)

Condition: good (used), total height: 2,710 mm, Technical data for the pallet racking upright: Racking system: Jung Heinrich Type: Esmena Included in the scope of delivery: 01x Pallet racking upright, used Material color: green Frame profile: M94 Dcodoz A Edhopfx Ai Ssn Profile dimensions: 76.2 x 74.7 x 2.3 mm Includes horizontal and diagonal braces, Base plates The uprights are pre-assembled (bolted framework) Height: 2,710 mm Depth: 1,050 mm General information about the item: This item is offered for pickup only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: used, clear span: 3,595 mm, total length: 18,575 mm, total height: 9,500 mm, load per truss pair (max.): 2,650 kg, Technical data for the pallet racking system: Racking system: Mecalux Technical data for the installation: Number of racking rows: 1 Length per racking row: approx. 18,575 mm Number of bays per racking row: 05, each 3,595 mm Number of levels including floor level: 04 Technical data for the volume: Pallet spaces per bay: 20 Pallet spaces per racking row: 100 Total pallet spaces: 100 Based on: Load handling unit: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height including pallet: not specified Weight per pallet (max.): 660 kg Included in the scope of delivery: 06x Pallet racking uprights, used Material color: blue Upright profile dimensions: 100 x 69 x 2.0 mm Upright type: M-101-P Including cross and diagonal braces Base plates The uprights are pre-assembled (bolted frame) 9,500 mm high 1,100 mm deep 40x Pallet racking beam, used Beam type: 2C-S 1315 Material color: orange Box profile: 130 x 50 mm Connector: 4 hooks Clear span: 3,595 mm Max. load per beam pair: 2,650 kg, with evenly distributed load 80x Integrated safety pin, used To secure the longitudinal beams against unintentional lifting out 24x Bolt anchor, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: cracked concrete Dcodjz A Awxjpfx Ai Sjn 12x Shimming plate, used Design: fully galvanized to level the racking uprights that are installed on uneven ground 01x Load sign with information on bay and shelf loads, manufacturer and batch number Dimensions: 420 x 297 x 3 mm General information about the item: This item is offered for collection only. Any additional transport or shipment of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: used, clear span: 3,595 mm, total length: 18,575 mm, load per truss pair (max.): 2,650 kg, Technical data for the pallet racking system: Racking system: Mecalux Technical data for installation: Number of racking bays: 01 unit Length per racking bay: approx. 18,575 mm Number of bays per racking bay: 05 units Number of levels including floor level: 02 units Technical data for volume: Pallet spaces per bay: 12 units Pallet spaces per row: 60 units Total pallet spaces: 60 units Based on: Load carrier: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Overall height including pallet: not specified Weight per pallet (max.): 660 kg Included in the scope of supply: 06x Pallet racking uprights, used Material color: blue Upright profile dimensions: 100 x 69 x 2.0 mm Upright type: M-101 Including cross and diagonal braces, Base plates The uprights are pre-assembled (bolted framework) 2,500 mm high 1,100 mm deep 20x Pallet racking beams, used Material color: RAL 2001 orange Beam type: 2C-S 1315 Box profile: 130 x 50 mm Clear width: 3,595 mm Maximum load per beam pair: 2,650 kg with evenly distributed load 40x Locking pin, used Material color: Sendzimir galvanized For securing the longitudinal beams against unintentional lifting out 24x Bolt anchor, new Manufacturer: Hilti Dsdpfx Asz A A Ausi Secn Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: cracked concrete 12x Shimming plate, used Design: fully galvanized For leveling the racking uprights that are installed on uneven ground 01x Load sign With information on bay and frame loads, manufacturer and order number Dimensions: 420 x 297 x 3 mm General information about the item: This item is offered for collection only. Any additional transport or shipment of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: used, Technical specifications for the pallet racking upright: Racking system: Mecalux Included in the scope of delivery: 01x pallet racking upright, used Material color: Sendzimir galvanized Djdpfx Aioz A Aqxj Sscn Frame profile: 120 x 69 x 1.75 mm Incl. horizontal and diagonal braces, Base plates The uprights are pre-assembled (bolted framework) Height: 2,500 mm Depth: 850 mm General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur extra costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: used, clear span: 2,700 mm, total length: 14,100 mm, load per truss pair (max.): 3,000 kg, Technical data for the pallet racking system: Racking system: Mecalux Technical data for installation: Number of racking rows: 01 unit Length per racking row: approx. 14,100 mm Number of bays / racking row: 05 units, each 2,700 mm Number of levels including base level: 02 units Technical data for capacity: Pallet spaces per bay: 09 units Pallet spaces per racking row: 45 units Total pallet spaces: 45 units Based on: Load carrier: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Dcsdpfsz A Ayajx Ai Sen Overall height incl. pallet: n/a Weight per pallet (max.): 1,000 kg Included in the scope of supply: 06x used pallet racking uprights Material color: blue Upright type: A103 Upright profile: 100 x 79 x 3.00 mm Incl. cross and diagonal bracing, Base plates The uprights are pre-assembled (bolted frame structure) 2,300 mm high 1,100 mm deep 20x new pallet racking beams Material color: RAL 2001 orange Box profile: 110 x 50 mm Beam type: 2C-S 1115 Clear width: 2,700 mm Agraffe: G.E. - 3 Max. load per beam pair: 3,000 kg, with evenly distributed load 40x integrated safety pin, new Material color: orange For securing the longitudinal beams against unintentional lifting 24x heavy-duty dowels, new Manufacturer: MKT Design: galvanized steel Approved for: uncracked concrete Through-installation: M 12-13/95 12x leveling plates, used Design: fully galvanized For leveling the racking uprights that are installed on uneven ground 01x load signs With information on bay and shelf loads, manufacturer and batch number Dimensions: 297 x 210 x 2 mm Note: The images are example images to illustrate the material. The quantities shown may differ from the scope of supply. General information about the item: This item is only offered for collection. Any additional desired transport or shipment of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of supply.

Condition: good (used), Technical data for the pallet racking system: Racking system: Arestant Type: AS Technical data for the installation: Number of racking rows: 01 unit Length per racking row: 19,575 mm Number of bays per racking row: 07 units Number of levels including base level: 04 units Technical data for the volume: Pallet spaces per bay: 12 units Pallet spaces per racking row: 84 units Total pallet spaces: 84 units Based on: Load support: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Overall height including pallet: n.a. Weight per pallet (max.): 400 kg Included in the scope of delivery: 08x Pallet racking uprights, used Material color: blue Frame profile: 8808 Profile dimensions: 80 x 80 x 1.50 mm Grid hole spacing: 50/50 mm Including cross and diagonal braces, Base plates The uprights are pre-assembled (bolted truss) Height: 5,000 mm Depth: 1,100 mm 42x Pallet racking beams, used Material color: orange Box profile: 80 x 40 mm Hook: 4 HK Clear width: 2,705 mm Design: Head beam Max. load per beam pair: 1,200 kg, with evenly distributed load. (Observe bay load) 84x Locking pins, used Material color: Sendzimir galvanized For securing the longitudinal beams against unintentional lifting 32x Bolt anchors, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Dodpez A Dzfefx Ai Sjcn Approved for: cracked concrete 16x Shims, used Design: fully galvanized For leveling the racking uprights that are installed on uneven ground 01x Load sign with information on bay and shelf loads, manufacturer and batch number Dimensions: 420 x 297 x 3 mm Your contact persons in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for pick-up only. Any additional transport or shipment of this item will incur additional costs, which can be requested separately from us depending on the delivery location and scope of delivery.

Condition: good (used), Technical data for the pallet racking upright: Racking system: Jungheinrich Type: MPB Included in the scope of delivery: 01x Pallet racking upright, used Material color, frame profile: hot-dip galvanized Material color, framework: Sendzimir galvanized Upright type: STD´B´28 Profile dimensions: 120 x 65.5 x 2.5 mm Incl. cross and diagonal bracing, upright protectors and base plates The uprights are pre-assembled (bolted framework) Height: 6,500 mm Depth: 1,100 mm Dcsdpfx Aioz A S Exe Sen Note: Steel grade S420MC is superior compared to S355MC Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: used, empty load weight: 6,585 kg, maximum load weight: 32,415 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 06/2022, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,730 mm, loading space volume: 92 m³, suspension: air, tire size: 385/65 R22,5, wheelbase: 7,700 mm, Year of construction: 2022, Equipment: ABS, Tare weight: 6585kg, GVW: 39000kg, Loading area (L W H): 13,620 mm x 2,480 mm x 2,730 mmTyre size: 385/65 R22.5, Loading area volume: 92 m³, 1st axle: , 2nd axle: , 3rd axle: , Air suspension, Rear underrun, Lift axle front, Electronic Brake System EBS, Toolbox, Spare wheel carrier double, Ferry lashings, Bolted chassis, ISO partition wall with ventilators, 1x15 and 2x7 pin plug, Antispray, Please find an overview of all vehicles available on our website . Finance required? We offer individual financing solutions, full service contracts and telematic-services. We would be glad to advise you personally. Dcsdjz D Ndhepfx Ai Sen

Condition: refurbished (used), functionality: fully functional, Year of construction: 2019, Forklift battery 24V 8PzS1000 Battery 82% TESTED Year of manufacture: unknown Weight: 676kg Dimensions: 825mm x 485mm x 630mm Equivalent to 24V 8PzS920 Battery has been serviced and tested by a specialist company. Dcodpfxoxf Nkgs Ai Ssn Capacity test (C5 discharge test): 824/1000 Ah battery Remaining capacity: 82% With Aquamatik filling system (BFS) With terminal bolts but WITHOUT end discharge cable

Condition: used, empty load weight: 8,807 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 07/2025, next inspection (TÜV): 07/2026, loading space length: 13,403 mm, loading space width: 2,490 mm, loading space height: 2,650 mm, loading space volume: 88 m³, suspension: air, tire size: 385/65 R22,5, color: white, Year of construction: 2025, Equipment: ABS, Unladen weight: 8807 kg, permissible total weight: 39000 kg, cargo space (L W H): 13,403 mm x 2,490 mm x 2,650 mm, tire size: 385/65 R22.5, cargo space volume: 88 m³, 1st axle: , 2nd axle: , 3rd axle: , air suspension, underrun protection, liftable front axle, pallet box, electronic braking system EBS, spare wheel holder (2x), ferry lashings, bolted chassis, temperature recorder, double-deck EURO pallet with beams, connection plug 1x15 and 2x7-pole, anti-splash, international customs seal, telematics system. You can find our entire vehicle range at [website address]. Would you like financing? With our value-added services, we offer you individual financing options, as well as full-service and telematics services. We will be happy to advise you. Dcsdpfx Aoz Ifgmei Son

Condition: new, empty load weight: 6,622 kg, maximum load weight: 29,378 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,950 mm, loading space volume: 99 m³, suspension: air, tire size: 445/45 R19,5, Year of construction: 2026, Equipment: ABS, Unladen weight: 6622 kg, permissible total weight: 36000 kg, load securing system with certificate, cargo area (L W H): 13,620 mm x 2,480 mm x 2,950 mm, tire size: 445/45 R19.5, certificate DIN EN 12642 (Code XL), cargo area volume: 99 m³, 1st axle: , 2nd axle: , 3rd axle: , air suspension, underrun protection, lift axle at the front, electronic braking system EBS, bolted frame, connection plug 1x15 and 2x7 pole, anti-splash guard, liftable roof (manual), tire pressure monitoring, ramp buffer. You can find our entire vehicle range at [website address]. Would you like financing? With our Value Added Services, we offer you individual financing options, full-service, and telematics services. We will be happy to advise you. Djdpfx Ajz Iuk Isi Socn

Condition: new, axle configuration: 2 axles, loading space length: 66,000 mm, loading space width: 2,550 mm, suspension: air, tire size: 275/70-22,5, color: black, = Additional Options and Accessories = - LED lighting - Air suspension = Notes = Internal number for customer inquiries: 2-149 !!! WORLD EXCLUSIVE !!! PAVIC HTA 20 66Z Shortwood Trailer with OPTIPA SW bolsters. SW = Quick-change. With this, you can remove the OPTIPA AL10 telescopic stakes in just a few minutes and have complete flexibility! Ideal for roundwood and sawn timber! The side bolster storage is included! You have the greatest possible flexibility that the market offers! !!! IMMEDIATELY AVAILABLE !!! You can choose the color of the stake strips from red, green, blue, neon red, neon yellow, or black! 2-axle bolster trailer 4x OPTIPA SW bolster body (quick-change system using a patented wedge system) 8x OPTIPA AL10 telescopic stakes Special wrench for stake assembly and telescoping Side aluminum box for storing the stakes (for 4 pieces) Optionally, a second, larger aluminum box for all 8 stakes could also be realized for an additional cost Chassis length approx. 6600 mm Overhang at the front approx. 710 mm (turntable bolster) Bolt-on hooks on the loading bolsters for load securing Payload 14750 kg Total weight technically possible 22,000 kg EBS / ABS Air suspension with safety cables, leaf spring suspension available upon request 2 x 10t SAF off-road axles Steering ring with double row of ball bearings, permissible axial load max. 20 tons Lifting cable at the front Smartboard Wabco Signal light system at the front, clearly visible as an indicator of the maximum air spring pressure LED lighting LED work lights High-quality powder coating - coating including the baking process Twin tires: 275/70 R 22.5 with branded tires on steel rims Optional: ALU wheels, brand ALCOA Dura-Bright, available at an extra cost Financing, leasing or hire purchase are possible. For further questions, our sales team will be happy to assist you. This is a non-binding offer. Subject to prior sale, errors and changes. = Further Information = Tire size: 275/70-22.5 Brakes: Disc brakes Suspension: Air suspension Front axle: Steered GVWR: 22,000 kg Dcedpoz Hkdhofx Ai Sjn Brand of superstructure: PAVIC shortwood bolster OPTIPA SW (quick-change) General condition: very good Technical condition: very good Optical condition: very good

Condition: new, number 77 Positionen weight 146 kg condition neu 28 mm Set 3: 77 pieces, 28mm system, consisting of: Dcsdpfxeupw Rvs Ai Sen Ferrules: 10 x 280610.N Ferrules: 6 x 280630.N Prism: 4 x 280648.1.N Bolt: 24 x 160511 Magnetic bolts 4 x 280740 Stop: 8 x 280410.N Stop: 8 x 280420.N Angle: 6 x 160110.N Angle: 2 x 280152.N Angle: 2 x 280162.N Angle: 1 x 280166.N Angle: 1 x 280167.N Accessory set. 1 x 283999 Price information plus packaging and transport.

Condition: used, functionality: fully functional, machine/vehicle number: 33063, overall weight: 18,000 kg, first registration: 06/2024, loading space volume: 15.1 m³, suspension: air, color: orange, Chassis consisting of 2 BPW axles, 9 tons each, air-suspended, single-tire configuration, plastic fenders, disc brakes, automatic load-dependent all-wheel drive pneumatic braking system with WABCO EBS, front impact protection, underrun protection, drawbar length 2,200 mm with retaining spring. Dsdsz Hxy Ropfx Ai Secn The tank volume is 15.1 m³, wall thickness 6 mm, the usable volume of the sludge chamber is reduced to approximately 12.8 m³ by the extension piston. The full-size top lid can be opened hydraulically upwards, lid locking with hydraulically operated latch, galvanized. Upper and lower suction connections are manually operated in DN 100. Perot connection and blank coupling. Tank content indicator with internal float and external scale, display in scale divisions of 500 l for with and without piston. Aluminum discharge chute, emptying through free outlet, pressurization, or by means of the extension piston. Locking of the piston by means of a pair of manually operated locking bolts. 2 piston seals with pressure regulation in the control panel. Suction line routed on the right side. Hose boxes on the right and left sides of the superstructure, made of aluminum, designed for circumferential hoses. Lockable plastic tool box. Control panel made of stainless steel at the rear right. 1 LED rotating beacon on the rear of the superstructure, 1 LED ambient lighting each on the left and right sides and at the rear of the tank with one LED spotlight each.

Condition: excellent (used), Year of construction: 2021, GANNOMAT "PROTEC 571" (drilling, grooving, milling) with Clamex and milling tools In top condition Base machine complete in standard configuration for drilling and grooving, including: - Additional safety device via louver curtain - Prerequisite for horizontal Lamello P-system milling - Prerequisite for milling diameters > Ø 16 mm, as well as for the use of multi-part milling tools Detailed technical data can be found in the data sheet for ProTec Type 0571 Machining unit with: PowerBlock with 21 spindles and 1 dado saw - 13 vertical drilling spindles - 6 horizontal drilling spindles in Y / 2 horizontal drilling spindles in X - 1 grooving unit in Y Workpiece sizes and weights - Workpiece width (X): min. 60 mm / max. 1000 mm - Workpiece thickness (Z): min. 6 mm / max. 60 mm - Workpiece length (Y): min. 250 mm in continuous mode max. 5600 mm programmable workpiece length in software - Workpiece weight: max. 75 kg 1 Milling unit Profit HSK63F with 3-way magazine for automatic tool change, motor 5.5 kW (S1), 1000-18000 rpm with frequency inverter, clockwise and counterclockwise rotation, for tool holder HSK63F with collet 462E/OZ25, cutter length up to 130 mm including options 1 Roller table 765 mm (Y-axis) foldable, for the front of the machine, width 500 mm 1 Roller table 765 mm (Y-axis) foldable, for the rear of the machine, width 500 mm 1 Auxiliary stop 600 mm with integrated rollers for roller tables Dcsdpfx Aozu A D Eei Sjn 1 SET OF TOOLS: Drill set for ProTec 1 Carbide grooving cutter  125/30 mm, grooving cutter width (SB) 4 mm, Z=12, LI, by Leitz 1 Tools for milling unit Profit HSK63F and HSK63F with 3-way magazine with collet 462E up to shank diameter 25mm, HSK and cutter set 1 HSK mounting set 1 Mounting device HSK63F, easiest operation with maximum user comfort thanks to roller clamping system, no clamping or tightening required, mounted on a stable base or workbench, 1 Hook wrench for HSK63F collet 462E, 1 Extraction distributor Ø 160 mm / Ø 80-80-80 mm, pitch 196 mm 1 Counterpressure device from above 1 Tool for vertical Lamello P-system milling Machine in very good condition with many drills and tools included. The machine can be viewed and demonstrated at our showroom. Location: available from stock in 54634 Bitburg - immediately available -

Condition: used, mileage: 10 km, power: 130 kW (176.75 HP), first registration: 10/2026, fuel type: diesel, color: orange, gearing type: automatic, emission class: euro6, number of seats: 6, total length: 6,204 mm, total width: 2,098 mm, total height: 2,352 mm, loading space length: 2,700 mm, loading space width: 2,040 mm, loading space height: 400 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, * Exhaust system, EU6e (EC) * Front-wheel drive * 8-speed automatic transmission * 4-cylinder turbo diesel engine, 2.0 l / 130 kW (4V) BIT * Start-stop system with brake energy regeneration * Tow hitch, fixed * Standard wheelbase 3,640 mm * End crossmember in wider design with L = 1,899 mm and H = 258 mm, bolted * Rear axle 'Standard' * Approved as 3.5 t * Front axle (1,800 kg load capacity) * Tires optimized for low rolling resistance, without specifying the tire brand * Immobilizer, electronic * Electrical terminal block and preparation for body builder * 'Climatronic' air conditioning in the cab * Daytime running lights with assist headlight function and * Coming and leaving home function * LED main headlights with LED daytime running lights * Preparation for load compartment lighting * Fog lights incl. cornering lights * Position lights on the roof, front * Preparation for rotating beacon in the front * Rear lights * Side marker lights * Headlight cleaning system, windshield washer fluid level indicator, heated * Windshield washer nozzles * Step lighting * Exterior mirrors, electrically adjustable and heated * Exterior mirrors left and right, convex, with integrated LED turn signal and wide-angle area * Standard roof * Rear window * Chassis with double cab * Radiator grille, black with chrome trim * Windshield wiper intermittent function with light and rain sensor * Laminated windshield with heat protection glazing, heated * Airbag for driver and front passenger, with front passenger airbag deactivation * Roof console with storage compartments, two 1-DIN slots and reading light * Sun visors, foldable and swiveling sideways * Electronic parking brake * Premium interior noise damping measures * Glove compartment with lockable flap, illuminated * Safety interior mirror, dimmable * Leather multifunction steering wheel, heated with Tiptronic * 12V socket, cup holder * Three-point automatic seat belts with height adjustment * 12V socket in the cab (in the instrument panel) * Seat belt control, E-contact in the seat belt buckle * 2 remote control keys * Keyless Go * Auxiliary water heater, with remote control * Chrome package * 4-seater bench seat in the 2nd row * Suspension seat 'ergoActive' left * Suspension seat 'ergoActive' right * Seat covers in 'Toronto Grid' fabric * Heated driver and front passenger seats Dcedpfxjyxu Awe Ai Sen * Digital instrument cluster * Tire pressure monitoring system * USB Type-C data and charging ports with increased charging power * 4 speakers: 2 tweeters, 2 woofers * Digital radio reception (DAB+) * MAN Media Van Navigation Business package (12.9 inches) * MAN SmartLink * MAN Connect * 3-button module * Comfort telephony with LTE and wireless charging * Hill start assist * Emergency brake assist * ESP with electronic differential lock, anti-slip regulation (ASR) and ABS * Parking assist, front and rear * ACC Stop & Go * Traffic sign recognition * Rear view camera * High beam assist 'Light Assist' * Driver attention and fatigue detection * Emergency assist (Active lane keeping assist and Emergency Assist and Traffic Jam Assist) * Intelligent speed assist * With multifunction camera * Cruise Assist Plus * Flatbed with aluminum sideboards, lashing eyes, step * Flatbed accessories: cab protection grille * Light & Visibility Package * Comfort Package Plus * Tire range R2011 * Country cluster 'WLTP EU approval' * Preparation for alcohol interlock system * Complete N1 approval (up to and including 3.5 t GVWR) Conversion service for pa

Condition: used, mileage: 10 km, power: 130 kW (176.75 HP), first registration: 10/2026, fuel type: diesel, next inspection (TÜV): 02/2028, color: silver, gearing type: automatic, emission class: euro6, number of seats: 6, total length: 7,004 mm, total width: 2,098 mm, total height: 2,330 mm, loading space length: 3,500 mm, loading space width: 2,040 mm, loading space height: 400 mm, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, parking heater, * Exhaust system, EU6e (EC) * All-wheel drive 4x4 * 8-speed automatic transmission 4x4 * 130 kW (LD) * Start-stop system with brake energy recuperation * Tow hitch, fixed * Rear crossmember in wide design with L = 1,899 mm and H = 258 mm, bolted * Differential lock on the rear axle (manually engageable, mechanical) * Rear axle 'Standard' * Approved as 3.5t * Front axle, reinforced * 4 steel wheels 6 1/2 J x 16, with 1,200 kg load capacity, in black * Tires 235/65 R16C 115/113 R, optimized for rolling resistance * Battery 520 A (92 Ah) * Immobilizer, electronic * Electrical connection strip and auxiliary equipment socket * Automatic climate control 'Climatronic' in the cab * Daytime running lights with automatic driving lights and coming and leaving home function * LED headlights with LED daytime running lights * Fog lights incl. cornering lights * Outline lights at the front on the roof * Preparation for a rotating beacon at the front * Tail lights * Side marker lights * Headlight cleaning system, windshield washer fluid level indicator, heated windshield washer nozzles * Step lighting * Exterior mirrors, electrically adjustable and heated * Exterior mirror left and right, convex, with LED turn signal and wide-angle view * H2 - Normal roof * Rear window * Chassis with double cab * Windshield wiper intermittent operation with light and rain sensor * Laminated windshield with heat-reflecting glazing, heated * Airbag for driver and passenger each, with passenger airbag deactivation * Roof console with storage compartments, two 1-DIN slots and reading light * Sun visors, foldable and swiveling sideways * Electronic parking brake Djdjzm D Naspfx Ai Secn * Premium interior noise damping measures * Glove compartment with lockable flap, illuminated * Safety interior mirror, dimmable * Leather multifunction steering wheel, heated with Tiptronic * 12V socket, cupholder * Three-point automatic safety belts with height adjustment * 12V socket in the cab (in the instrument panel) * Seat belt warning, front and rear * 2 remote key fobs * Keyless Go * Auxiliary water heater, with remote control * Chrome package * Bench seat for 4 in the 2nd row of seats * Suspension seat 'ergoActive' left * Suspension seat 'ergoActive' right * Seat covers in fabric 'Toronto Grid' * Seat heating for driver and passenger seats, separately adjustable * Digital instrument cluster * Tire pressure monitoring system * USB Type-C data and charging sockets with increased charging power * 4 loudspeakers: 2 tweeters, 2 woofers * Digital radio reception (DAB+) * MAN Media Van Navigation Business package (12.9 inches) * MAN SmartLink * MAN Connect services incl. call services * Comfort telephony with LTE and wireless charging * With voice control * Hill start assist * Emergency brake assist (Front Assist) * ESP with electronic differential lock, * Anti-slip regulation (ASR) and ABS * Parking assist (PDC) front and rear * Automatic distance control (ACC) * Traffic sign recognition * Rear view camera preparation * High beam assist 'Light Assist' * Driver attention and fatigue detection with driver monitoring camera * Emergency assist incl. driving assistant (Travel Assist) and lane keeping assist (Lane Assist) * Speed limiter with predictive control * Multifunction front camera * Cruise Assist Plus * Flatbed with aluminum side panels, lashing eyes, step * Flatbed accessories: Cab protection grille * Stone chip protection (without CO2 optimization) * Construction package flatbed * Light & Safety

Condition: used, mileage: 10 km, power: 130 kW (176.75 HP), first registration: 10/2026, fuel type: diesel, color: silver, gearing type: automatic, emission class: euro6, number of seats: 6, total length: 6,204 mm, total width: 2,098 mm, total height: 2,330 mm, loading space length: 2,700 mm, loading space width: 2,040 mm, loading space height: 400 mm, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, parking heater, * Exhaust system, EU6e (EC) * All-wheel drive 4x4 * 8-speed automatic transmission for 4x4 * 4-cylinder turbo diesel engine, 2.0 l / 130 kW (4V) * BIT, common-rail base engine: TK1/TK4 * Start-stop system with brake energy recuperation * Trailer coupling, fixed * Standard wheelbase 3,640 mm * Rear crossmember in wider design with L = 1,899 mm and H = 258 mm, bolted * Rear axle differential lock (manually switchable, mechanical) * Rear axle 'Standard' * Approved as a 3.5t vehicle * Front axle, reinforced * 4 steel wheels 6 1/2 J x 16, with 1,200 kg load capacity, in black * Tires 235/65 R16C 115/113 R, optimized for low rolling resistance * All-season tires * Immobilizer, electronic * Electrical terminal block and wiring harness * 'Climatronic' air conditioning in the cab * Daytime running lights with assistant driving lights and coming and leaving home function * LED main headlights with LED daytime running lights * Fog lights incl. cornering light * Position lights on the roof, front * Preparation for a rotating beacon at the front * Rear lights * Side marker lights * Headlight cleaning system, windshield washer fluid level indicator, heated windshield washer nozzles * Step lighting Djdpfx Aiszwtfrs Secn * Exterior mirrors, electrically adjustable and heated * Exterior mirrors left and right, convex, with integrated LED turn signal and wide-angle area * Normal roof * Rear window * Chassis with double cab * Windshield wiper intermittent control with light and rain sensor * Laminated windshield with heat-insulating glazing, heated * Airbags for driver and front passenger, with front passenger airbag deactivation * Roof console with storage compartments, two 1-DIN slots and reading light * Sun visors, foldable and swiveling sideways * Electronic parking brake * Premium interior noise damping measures * Glove compartment with lockable flap, illuminated * Safety interior mirror, dimmable * Leather multifunction steering wheel, heated with Tiptronic * 12-V socket, cup holder * Three-point automatic seat belts with height adjustment * 12-V socket in the cab (in the instrument panel) * Seat belt warning, E-contact in the seat belt buckle * 2 remote control keys * Keyless Go * Auxiliary water heater, with remote control * Chrome package * Bench seat for 4 in the 2nd row of seats * Suspension seat 'ergoActive' on the left * Suspension seat 'ergoActive' on the right * Seat covers in fabric 'Toronto Grid' * Seat heating for driver and front passenger seat, separately adjustable * Digital instrument cluster * Tire pressure monitoring system * USB Type-C data and charging ports with increased charging power * 4 loudspeakers: 2 tweeters, 2 woofers * Digital radio reception (DAB+) * MAN Media Van Navigation Business package (12.9 inch) * MAN SmartLink * MAN Connect * Comfort telephony with LTE and wireless charging * With voice control * Hill start assist * Emergency brake assist * ESP with electronic differential lock, anti-slip regulation (ASR) and ABS * Parking assistance system (PDC) front and rear * ACC Stop & Go * Traffic sign recognition * Preparation for rear view camera * High beam assistant 'Light Assist', driver alert system and fatigue warning * Emergency assistant (active lane keeping assistant and emergency assist and traffic jam assistant) * Intelligent speed assist * Multifunctional front camera * Cruise Assist Plus * Platform body with aluminum sideboards, lashing eyes, step * Platform body accessories: cab protection grille * Stone chip protection * Const

Condition: used, mileage: 52,672 km, power: 125 kW (169.95 HP), first registration: 06/2025, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, number of seats: 3, total length: 6,946 mm, total width: 2,345 mm, total height: 2,280 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, tail-lift, Vehicle number: 263385 1st owner, accident-free, regularly serviced according to maintenance schedule, non-smoker ---- HIGHLIGHTS & PACKAGES * Winter package * Charging package, dashboard * Smoker package ASSISTANCE SYSTEMS * Active Brake Assist * Mercedes-Benz emergency call system Djdpfjz H Hd Rox Ai Sscn * Breakdown management * Traffic sign assistant * Active Lane Keeping Assist * Rain sensor * ATTENTION ASSIST * Headlight assistant * ECO Start-Stop function * Cruise control * Crosswind assist ENGINE, TRANSMISSION & CHASSIS * 6-speed manual transmission ECO Gear AUDIO & COMMUNICATION * Digital radio (DAB) * MBUX multimedia system * Communication module (LTE) for digital services * Instrument cluster with color display INTERIOR * Multifunction steering wheel * Steering wheel adjustable in inclination and height * USB socket 5 V * Switch for special signals in the cockpit * Socket in the cab * Pre-installation for electrical system, configurable special module * Storage compartment above the windshield * Cup holders in the front * Folding cover for storage compartment * Storage compartment under the cockpit * Seat heating for front passenger * Seat heating for driver * Semi-automatic controlled air conditioning system TEMPMATIC * Climate zone 1 (cold/comfort) * Speedometer km/h * Comfort roof control panel * Armrest for driver's seat * Passenger seat for two people * Grab handle for inside seat in the case of a two-person seat * Airbag driver * Airbag passenger * Comfort driver's seat * Grab handles for entry for driver and passenger * Rear wall cladding * All-weather floor mats * Fabric Maturin black * Digital operating manual LIGHTS & VISIBILITY * Outline lights * Turn signal lights, side, front * Adaptive brake light * LED High Performance headlights * Mirror head, large TECHNOLOGY & SAFETY * Hill-start assist * Parking brake, electric * Jump-start contact * Anti-theft alarm system * Seatbelt warning system for passenger seat * Seatbelt warning system for driver seat * Outside temperature display * Gear shift indicator * Seat occupancy recognition, driver's seat EXTERIOR * Exterior mirrors, heated and electrically adjustable * WET WIPER SYSTEM * Exterior mirrors without turn signal indicators * Thermally insulated glass with band filter on the windshield * Side marker lights * Rear crossmember, bolted * Towing eye, rear * Acoustic package * Arctic white OTHER EQUIPMENT * Front axle with increased load capacity * Stabilization level I * Vibration damper * Battery main switch, single-pole * Separating relay for additional battery * Electrical system for trailer socket * Vlies battery 12 V 92 Ah * Pre-installation for electrical system, reversing assistance * Chassis with cab * Basic * Head unit Europe/CIS countries/Mongolia * 3.5-ton vehicle * Exhaust gas purification SCR generation 4 * Rear lamp wiring harness, extended * Europe * Generator 14 V / 250 A * Vehicle capable of running on HVO * Engine version Euro VI * Longitudinal member reinforcement * Registration certificate, part II, prepared * Manufacturer Mercedes-Benz AG * Without weight adjustment 3,500 kg * Noise reduction measures * Mercedes-Benz MobiloVan with roadside assistance and extended warranty * Signage / printed materials in German * Minimum reference weight of 2381 kg required * Control code conversion WLTP * Country version EU - EFTA - UK * Manufacturing Ludwigsfelde * Additional bodywork measures * Control of registration documents during input of delta weight Further features

Condition: used, faceplate diameter 1800 mm hollow 300 mm Cone 463 mm 380 thickness of jaw 100 mm Thickness 200 mm total power requirement . kW weight of the machine ca. 590 kg dimensions of the machine ca. . m Djdpfxoz Icxms Ai Secn 340 rpm Bolt circle: 330 mm Fit: 285 mm Jaw width: 55 mm Thickness: 170 mm Opening: 145 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, empty load weight: 6,655 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 11/2020, loading space length: 13,620 mm, loading space width: 2,485 mm, loading space height: 2,890 mm, loading space volume: 97 m³, suspension: air, tire size: 445/45 R19,5, Year of construction: 2020, Equipment: ABS, Unladen weight: 6655 kg, permissible total weight: 36000 kg, load securing system with certificate, cargo area (L W H): 13,620 mm x 2,485 mm x 2,890 mm, tire size: 445/45 R19.5, certificate DIN EN 12642 (code XL), cargo area volume: 97 m³, 1st axle: , 2nd axle: , 3rd axle: , air suspension, underrun protection, electronic braking system EBS, spare wheel holder, bolted chassis, sliding tarpaulin, connection plug 1x15 and 2x7-pole, you can find our entire vehicle range at [website address]. Would you like financing? With our value-added services, we offer you individual financing options, full-service, and telematics services. We will be happy to advise you. Dcsdpfxsz Ifhke Ai Son

Condition: as good as new (ex-display), functionality: fully functional, This single-sided heavy-duty cantilever rack is ideal for storing heavy long goods such as pipes, profiles, metal bars, steel beams, wooden strips, and sheet material. With a total length of approximately 13.20 meters, a height of approximately 4.00 meters, and cantilever arms of approximately 120 cm, this long goods rack offers a high storage capacity across a total of 4 storage levels (floor level + 3 levels). Each cantilever arm supports up to 500 kg, and the uprights can support up to 2,250 kg. The cantilever arms are bolted on and can be flexibly adjusted in height via a hole grid of 200 mm. The completely hot-dip galvanized material ensures long-lasting protection both indoors and outdoors – new goods available from the Wietmarschen warehouse. PRODUCT DETAILS: - Rack type: single-sided heavy-duty cantilever rack - Total length of the rack row: approx. 13.20 m - Total height: approx. 400 cm - Arm length: approx. 120 cm (made of IPE 80) - Center distance (upright spacing): approx. 131 cm - Levels: floor level + 3 storage levels - Load capacity per arm: max. 500 kg (with uniform distribution) - Load capacity per upright: max. 2,250 kg (with uniform distribution) - Upright profile: IPE 160, approx. 400 cm, including base - Hole grid upright: approx. 20 cm - First hole above base: approx. 107.5 cm (from top of base) - Top hole pair: approx. 50 cm below the upright head (from top of head) - Design: single-sided, cantilever arms bolted on Dsdpfoz Iw Trox Ai Secn - Surface: completely hot-dip galvanized - Availability: new goods SCOPE OF DELIVERY: - 11 x uprights, approx. 400 cm made of IPE 160, including base, hole grid 20 cm - 33 x cantilever arms, approx. 120 cm made of IPE 80 (without end stops) - Including all connecting elements - Including all necessary screws - 1 x load sign Price: €5,750.00 net €6,842.50 gross You will receive an invoice with VAT shown. DELIVERY, ASSEMBLY & INSPECTION: - Nationwide delivery by our partner shipping company – freight costs depend on the postal code - Professional assembly and disassembly by trained teams is optionally available - Rack inspections according to DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racks from other manufacturers is also possible PLANNING & CONSULTATION: Our planning department will be happy to prepare a non-binding offer for you – tailored to your individual requirements. Whether it's a new installation, renovation, or expansion – we will provide you with competent advice on your rack configuration. Haven't found the right one yet? Visit our website – here you will find a quick overview of many offers and variations of the products! ARE YOU INTERESTED OR DO YOU HAVE QUESTIONS? Simply contact us via message or phone call. You will find our telephone number on our company website. You can reach us by telephone from Monday to Friday, 08:00 - 16:00. Alternatively, you can send us a message with your name and number, and we will get back to you as soon as possible.

Condition: new, Cantilever rack, new H: 400cm, base +3 storage levels with roof & rear panel Free delivery within Germany, except islands Data : - H : approx. 400 cm - D : approx. 147 cm - L : approx. 1420 cm - Cantilever arms : approx. 125 cm - Axial dimension: 290 cm (can be adapted to customer requirements) - New goods - made in Germany. - Delivery time approx. 6 weeks after commercial clarification. - 1000 kg load per arm - 4000 kg load per upright - Uprights in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are bolted. - Arms adjustable in 200 mm increments. - Levels: Base + 3 storage levels (4 storage levels) Shelf consists of : - 06 x uprights, incl. base approx. 400 cm made of IPE270. Dodpfez Iqwkox Ai Sjcn - 18 x cantilever arms approx. 125 cm made of IPE 120. - 06 x roof girder approx. 150 cm made of IPE 120, 5° rising roof pitch. - incl. roof and rear wall material. - incl. all necessary connecting elements and screws. Why BLT cantilever racks ? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the uprights and cantilever arms are statically verifiable at 100% load. - All shelving systems are supplied in a hot-dip galvanized version. They can therefore be installed both indoors and outdoors and do not rust like painted systems. Consistent appearance for many years. - We use the legally prescribed hot-dip galvanized screw fittings in accordance with DIN EN 15048-1 - Long after-sales guarantee - The upright base and upright back are welded together, providing additional safety and short assembly times because the feet do not have to be bolted to the upright back. - Bracing made of angle steel, so no adjustment with turnbuckles necessary. This shortens the assembly time. - No slotted hole system, therefore no weakening of the upright profile. Price : 12.250,00 € net plus statutory value added tax. You will receive an invoice with VAT shown. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your operating equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: new, Year of construction: 2020, Cantilever rack NEW Data : - H : approx. 416 cm - D : approx. 137 cm - L : approx. 402 cm - Cantilever arms : approx. 120 cm - Axial dimension : 131 cm - NEW GOODS immediately from stock. - 500 kg load per arm - 2250 kg load per upright - Uprights in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are bolted. - Arms adjustable in 100 mm increments. - Levels: Base + 3 storage levels (4 storage levels) Shelf consists of : - 04 x uprights, incl. base approx. 416 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 80 - incl. all necessary connecting elements and screws. Why BLT cantilever racking ? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the uprights and cantilever arms are statically verifiable at 100% load. Dsdpfx Aoz Iq Ayei Sscn - All shelving systems are supplied in a hot-dip galvanized version. They can therefore be installed both indoors and outdoors and do not rust like painted systems. Consistent appearance for many years. - We use the legally prescribed hot-dip galvanized screw fittings in accordance with DIN EN 15048-1 - Long after-sales guarantee - The upright foot and upright back are welded together, providing additional safety and short assembly times, as the feet do not have to be bolted to the upright back. - Bracing made of angle steel, so no adjustment with turnbuckles necessary. This shortens the assembly time. - No slotted hole system, therefore no weakening of the upright profile. Price : 2578,00 € net + statutory value added tax. You will receive an invoice with VAT shown. Accessories such as ground anchors, collision protection etc. can also be purchased from us. Transportation : The delivery is carried out on request by our partner forwarding agency, the costs depend on the postal code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: new, Year of construction: 2024, functionality: fully functional, carrying capacity per cantilever arm: 140 kg, shelf height: 2,500 mm, total length: 3,150 mm, total width: 810 mm, total height: 2,500 mm, axle spacing: 1,030 mm, load capacity per stand: 560 kg, approx. 3.15 running meters. Cantilever shelf H: 250 cm 140 kg/arm META Multistrong Data : - H : approx. 250 cm - D : approx. 81 cm - L : approx. 315 cm - Cantilever arms : approx. 60 cm - Axial dimension : 103 cm - NEW GOODS immediately from stock. - 140 kg load per arm - 1120 kg load per upright - Uprights in RAL5010 (gentian blue). - Cantilever arms in RAL5010 (gentian blue). - Arms are hooked in and secured with locking bolts. - Arms adjustable in 70 mm increments. - Levels: Base + 4 storage levels (5 storage levels) Shelf consists of : - 04 x uprights, incl. base approx. 250 cm made of IPE120. - 16 x cantilever arms approx. 60 cm made of rectangular profile 40 x 30 mm. - incl. all necessary connecting elements and screws. -- Available immediately Price : 1525,00 € net 1814,75 € gross You will receive an invoice with VAT included. Accessories such as ground anchors, collision protection etc. can also be purchased from us. Djdpfx Aijz Iq A Hj Socn Transportation : The delivery is carried out on request by our partner forwarding agency, the costs depend on the postal code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.