Used Tightening Bolts for sale (1,879)

Condition: used, overall weight: 2,19,000 kg, maximum load weight: 1,75,620 kg, axle configuration: > 3 axles, first registration: 01/2002, Equipment: ABS, STHP 8 (3 + 5) 8-piece hydraulic BWP pendulum axle units with radio remote control. Total weight technically possible: 219,000 kg Payload technically possible: 175,620 kg Hydraulically suspended and 8-axle steerable Goldhofer low-bed low-loader type STHP 8 (3+5) consisting of 4 heavy-duty modules with a detachable gooseneck and up to 5-meter-long telescopic excavator low-bed with 4 wheel recesses with ABS up to 175,620 kg payload technically possible. Consisting of the following 4 separate heavy-duty module parts: 1st Module: Hydraulic universal gooseneck type STH / ST Year of manufacture 2002 Can be combined with heavy-duty module chassis, with drive-over loading bridges. Empty weight approx. 5,900 kg Permissible fifth-wheel load front 35,000 kg Length approx. 4.10 m Fifth-wheel height approx. 1.30 m King Pin 3.5" bolt Aluminum side boards plug-in Fully hydraulically adjustable 2nd Module: Goldhofer THP/ST3 3-axle heavy-duty chassis module First registration: 14.11.2001 As a single module total weight technically possible: 108,000 kg, axles technically possible load: 36,000 kg at 5 km/h possible. Empty weight: 10,350 kg As a single module technical payload up to 97,650 kg at 5 km/h possible. Hydraulic pendulum axles 8-fold, 24 x fitted with tires: 215/75/R17.5 Axle load: 25 tons at 20 km/h Vehicle width: 3 meters Hnjdpfx Aaexcdfgobeu Axle distance: 1.5 meters Max. steering angle: ±60° Hydromechanical 2-circuit all-wheel forced steering integrated into the chassis with a maximum steering angle of the axle units of 60° with integrated hydraulic oil tank Front and rear optimized bolt-lug coupling for longitudinal combinations Single-tire pendulum axle units with a total of 8 wheels per axle line Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure spring suspension Hydraulic steering of all axles BPW axles with drum brakes and ABS and technically possible axle load of 34 tons at 5 km/h 3rd Module: Extendable heavy-duty low-bed module - excavator bridge Year of manufacture 2002 Internal dimensions approx. 7.50 meters long, 3.00 meters wide and 0.40 meters loading height Construction height 350 mm Extendable by approx. 5.00 meters - telescopic 4 wheel recesses with ramp module in the front area Construction height in the wheel recess area approx. 150 mm Load up to 80 tons in the low-bed and 175.6 tons in the complete STHP8 (3+5) module possible. Empty weight 11,900 kg Front and rear hydraulic bolt lug coupling with claw coupling adapter 4th Module: Goldhofer THP/ET5 5-axle heavy-duty chassis module First registration: 04.01.2002 Technically possible total weight: 115,000 kg, axles technically possible load 23,000 kg at 5 km/h possible Empty weight: 14,200 kg Technical payload up to 100,800 kg possible. Single-tire hydraulic pendulum axle units with 4 wheels per axle line fitted 20x with 285/70 R 19.5 Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure spring suspension Hydraulic steering of all axles Radio remote control for steering axles 5. Notes: With the 4 heavy-duty modules, up to 3 different pull combinations are possible! The payloads change with different pull combinations. A current manufacturer's certificate from Goldhofer is available for the special low-bed combination. The low-bed can be tested at our facility. Price NET plus 19% VAT. All details provided without guarantee. Subject to changes, errors and prior sale. Internal vehicle number: 2285 Advertisement als

Condition: as good as new (ex-display), functionality: fully functional, power: 242 kW (329.03 HP), gearing type: automatic, fuel type: diesel, overall weight: 24,200 kg, empty load weight: 24,200 kg, operation weight: 24,200 kg, Year of construction: 2024, operating hours: 155 h, Equipment: ABS, UVV, additional headlights, air conditioning, all wheel drive, cabin, cruise control, differential lock, low noise, onboard computer, pallet forks, standard shovel, Hyundai HL970A Year of manufacture: 2024 Operating hours: approx. 155 Cyclone air pre-filter Air compressor for cab Standard brake accumulator Safety boom (general) Remote-controlled door LED cab lights (4 front) Voltage converter 24V -> 12V LED beacon All-around view monitor (AAVM) Radar LED driving lights LED combination lights Second monitor Single brake pedal Piping for 3rd control circuit Central lubrication system Bekamax Piping for quick coupler Joystick steering Standard lift frame With emergency steering Ride control 5-speed transmission (torque converter) Quick coupler ISO SW (Volvo type attachment) Triangle TB5 radial tires Transmission guard Control block (MCV) with 3 sections Air-suspended heated seat Hydraulic oil - VG46 Accelerator pedal with ECO switch Without Bmair filter system Hjdpfsw Rdt Ujx Aabenu Standard paintwork Fingertip 3-lever electric control Rear window roller blind Wheel chock Axle cooling - front & rear Hydraulic differential Rear axle without differential lock Universal bucket 4.2 m³, with bolt-on edge/blade Universal bucket 4.6 m³, with teeth

Condition: used, mileage: 38,500 km, power: 110 kW (149.56 HP), fuel type: diesel, gearing type: automatic, first registration: 03/2023, next inspection (TÜV): 03/2026, emission class: euro6, color: blue, number of seats: 5, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, second-hand vehicle warranty, soot filter, Special equipment: Hodpfxjw Umnve Aabjnu Driver assistance system: Driving Assistant, vehicle without model designation, metallic paintwork, parking assistant package, tire repair kit (mobility pack), front seat heating, sun protection glazing (darkened rear windows) Additional equipment: Storage package, front passenger airbag deactivatable, driver/passenger airbags, equipment package: Connected Professional, exterior: high-gloss Shadow Line, electrically adjustable and heated exterior mirrors, body color exterior mirrors, BMW Live Cockpit Plus, onboard computer, brake assist, DAB tuner (digital radio reception), roof rails high-gloss Shadow Line, wheel theft protection (locking wheel bolts), thru-loading facility (rear center armrest), dynamic brake lights, Dynamic Stability Control (DSC) with extended scope, Dynamic Traction Control (DTC), first aid kit, driver assistance system: Active Guard Plus (lane departure warning, front collision warning), driver assistance system: attention assistant, driver assistance system: driving experience switch, remote tailgate release, velour floor mats, front footwell illumination, luggage compartment partition net, luggage compartment lighting, automatic tailgate operation, LED rear lights, interior trim: matt-grained Quartz Silver decorative inlays, five-door body design, 3-zone automatic climate control with automatic air recirculation control, rear head airbag system, front head airbag system, foldable rear head restraints, multi-function sport/leather steering wheel, alloy wheels, mild hybrid 110 kW (2.0 l - 110 kW diesel engine), model update, Park Distance Control (PDC) front and rear, electric parking brake, tire pressure monitoring system, Euro 6d emissions standard, LED headlights, rear side airbags, front side airbags, seat upholstery: Hevelius fabric, mirror package, start/stop system, warning triangle, widescreen display, heat-insulating tinted glazing.

Condition: new, The KNWP 50 M is a top-of-the-line manual workshop press designed for various applications in the Workshop Presses category, particularly in the Manual Workshop Press group. Built in Europe, this robust hydraulic press is ideal for assembly, straightening work, and testing workpieces in mechanical workshops, garages, and locksmiths. Its features include a manually operated hydraulic pump with both hand and foot control, a rigid machine frame made from a carefully machined weldment structure, and adjustable table height for enhanced versatility. The 2-step hydraulics allow you to switch between quick-stroke and work stroke effortlessly. This 50-ton press simplifies tasks such as the removal and installation of bearings and bolt pressing while ensuring safe and professional operations. The included material support and multi-function die enhance productivity, making it an essential tool for professionals. For further inquiries and to explore your options, request a quote today. Hnsdpfx Aouyh Tweabeu

Year of construction: 2022, condition: refurbished (used), A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant Refurbished Pharmapaktor APC L200/50. The machine was previously used as a demo and rental unit. Compacting head Two cast stainless steel H-frames connected by spacer bolts. Two laterally foldable swing arms for easy and quick changing of the rollers. The swing arms are fixed with two tie rods, which also absorb the compressive forces of the compacting rollers. One chamber insert for guiding the product flow and two center pieces for sealing the rollers. Pre-compaction unit The pre-compaction unit is mounted on a supporting column and can be lifted and swivelled to the side. The charging hopper (with 2 brake bars) is equipped with a cylindrical/conical precompression screw. When the pre-compaction unit is lifted off, a limit switch switches off the compacting rollers and the screw. Materials and surfaces In contact with product: 316 L stainless steel. (1.4404) Ra ᐸ1.2 μm not in contact with product: stainless steel 304 (1.4301) Ra ᐸ1,2μm Drives Three-phase current geared motors Technical data rolls Nominal power (kW): 4,0 Speed (rpm) 3 - 30 Hedpfxofhmmxo Aabonu voltage: 400 V, 50 Hz Protection class: IP 55 Compacting rollers The rollers for the PHARMAPAKTOR are made of hardened stainless steel. Rollers, roller bearings and bearing seals form a complete unit and are delivered fully assembled. It is therefore not necessary to dismantle the bearings to change the rolls. Roller profile: At your choice roller diameter: 200 mm roller width: 50 mm roller gap: 2.5 mm

Condition: used, mileage: 1,18,047 km, power: 350 kW (475.87 HP), first registration: 09/2022, overall weight: 18,000 kg, fuel type: diesel, color: blue, fuel: diesel, gearing type: automatic, emission class: euro6, suspension: air, Equipment: ABS, air conditioning, airbag, central locking, cooling unit, cruise control, parking heater, power assisted steering, seat heater, soot filter, traction control, trailer coupling, D6G automatic air conditioning, A1C front axle 7'5 t, A1Z front axle cranked version, A2E rear axle crown gear 440' hypoid 13'0 t, B1B electronic braking system with ABS and ASR, B1F heating electronic compressed air supply unit, B2A disc brake on front and rear axles, B4A condensate monitoring for compressed air system, B4M compressed air tank steel, B5J brake and electrical connections low, C0G frame overhang 1050 mm, C1W wheelbase 3700 mm, C5D step behind driver's cab left, C5P frame bolted, C6G steering‚ servo twin, C6I power steering pump‚ regulated, C6Q stabilizer‚ front axle, C7F front underrun protection (ECE)‚ aluminum, C7T integral rear, C8C rear axle fender‚ 2500 mm vehicle width, C8H fender 3-part‚ with EC splash guard, C8I splash guard (EC)‚ front, C8Y underbody paneling‚ aerodynamic, D0A leather steering wheel, D0S compressed air connection‚ in the driver's cab, D0U smoke detector‚ in the driver's cab, D1C driver's suspension seat‚ comfort, D1N passenger functional seat, D2N seat back‚ release‚ Driver's seat, D3A comfort bed, top, wide, levelable, D3B comfort bed, bottom, D3M mattress, PremiumComfort, bottom, D3N mattress, PremiumComfort, top, D3Q seat cover, velours, driver's seat, D3T seat cover, velours, passenger seat, middle seat, D4S sun blind, 1-piece, electric, windscreen, D4T curtain, across front of bed(s), D4Z sun blind, side, driver and passenger side, D5Z carpet covering Engine tunnel, D6C electric auxiliary air conditioning, D6I residual heat utilization, D6M hot water auxiliary heating, we can be reached by phone Monday - Friday until 8:00 p.m. and Saturday until 4:00 p.m.!! More:!! Leasing/financing and trade-in possible!! !! !! -Subject to errors and prior sale!! Hedpfxoxnwmbj Aabjnu -All information without guarantee ... more on our homepage

Condition: used, axle configuration: > 3 axles, overall weight: 2,19,000 kg, maximum load weight: 1,75,620 kg, first registration: 01/2002, Equipment: ABS, STHP 8 (3 + 5) 8 units of hydraulic BWP pendulum axle assemblies with remote control. Technically permissible gross weight 219,000 kg Technically permissible payload 175,620 kg Hydraulically suspended, 8-axle steered Goldhofer low-bed heavy-duty trailer type STHP 8 (3+5), consisting of 4 heavy-duty modules with a detachable gooseneck and extendable excavator low-bed section up to 5 meters, featuring 4 wheel recesses, ABS, technically permissible payload up to 175,620 kg. Consisting of the following 4 separate heavy-duty module parts: 1st module: Hydraulic universal gooseneck type STH/ST Year of manufacture: 2002 Can be combined with heavy-duty module undercarriages, drivable loading platforms. Unladen weight approx. 5,900 kg Permissible front fifth wheel load: 35,000 kg Length approx. 4.10 m Fifth wheel height approx. 1.30 m King pin 3.5" pin Removable aluminum side walls Fully hydraulically adjustable 2nd module: Goldhofer THP/ST3 3-axle heavy-duty module First registration: 14.11.2001 As a single module, technically permissible total weight: 108,000 kg, technically permissible axle loads: 36,000 kg at 5 km/h possible. Unladen weight: 10,350 kg As a single module, technical payload up to 97,650 kg at 5 km/h possible. 8 hydraulic pendulum axles, 24 wheels, tire size: 215/75/R17.5 Axle load: 25 t at 20 km/h Vehicle width: 3 meters Axle spacing: 1.5 meters Max. steering angle: ±60° Integrated into chassis: hydromechanical dual-circuit all-wheel forced steering with a maximum aggregate steering angle of 60°, integrated hydraulic oil tank Optimized bolt-lug coupling at front and rear for longitudinal combinations Single-tired pendulum axle assemblies with a total of 8 wheels per axle line Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure suspension Hydraulic steering for all axles BPW axles with drum brake and ABS, technically permissible axle load of 34 t at 5 km/h 3rd module: Extendable low-bed heavy-duty module - Excavator bridge Year of manufacture: 2002 Internal dimensions approx. 7.50 meters long, 3.00 meters wide, loading height 0.40 meters Construction height 350 mm Extendable by approx. 5.00 meters - telescopic 4 wheel recesses with drive-on module at the front Construction height in wheel recess area approx. 150 mm Load capacity up to 80 t in low-bed and 175.6 t in overall STHP8 (3+5) module possible. Unladen weight 11,900 kg Front and rear hydraulic bolt-lug coupling with claw coupling adapter 4th module: Goldhofer THP/ET5 5-axle heavy-duty module First registration: 04.01.2002 Technically permissible total weight: 115,000 kg, technically permissible axle loads 23,000 kg at 5 km/h possible Unladen weight: 14,200 kg Technical payload up to 100,800 kg possible. Single-tired hydraulic pendulum axle assemblies with 4 wheels per axle line, 20 wheels (tire size 285/70 R 19.5) Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure suspension Hydraulic steering for all axles Remote control for steering axles 5. Notes: With the 4 heavy-duty modules, up to 3 different tractor combinations are possible! Payloads change depending on the configuration. For the special low-bed combination, a current manufacturer's certificate from Goldhofer is available. The low-bed trailer can be tested at our facility. Price NET excluding 19% VAT. All information without guarantee. Subject to errors and prior sale. Internal vehicle number: 2285 Hsdpfxoxcdfae Aabjnu

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 3,850 h, power: 125.03 kW (169.99 HP), motor manufacturer: Fendt, gearing type: automatic, fuel type: diesel, maximum speed: 50 km/h, first registration: 05/2021, next inspection (TÜV): 03/2027, color: green, front tire size: 540/65 R28, rear tire size: 650/65 R38, machine/vehicle number: 0438231360, Equipment: additional headlights, air conditioning, cabin, front power take-off, front-end loader, hydraulics, lighting, trailer coupling, o Professional Version o Vario TMS o 50 km/h Version o Heated Fuel Pre-Filter o Pre-Heating Package o Rear MZW: 540/540E/1000 rpm o Without Immobilizer Hnjdpfxjwamkpj Aabju o Hydraulic Pump 110 l/min o Rear Hydraulic Connections: 3 DA DUDK (with lever relief) o Front Hydraulic Connections: 1 DA o Rear Return Line, Pressure-Free o EHR Control, Rear Power Lift (EW) o External Hydraulic Valve Actuation o Hydraulic Rear Top Link o Cat. 2 Front Power Lift o Front PTO 1000 rpm o Corner Lights o Additional Front Lighting o 6 front work lights: front roof, front inside, cab A-pillar o 6 rear work lights: 2 pairs of rear roof, rear fender o LED Rotating Beacon, Left o Vario Terminal 10.4" o Air conditioning o Electric rearview mirror + wide-angle mirror o Segmented windshield wipers / 2 wiper fields o Mechanical cab suspension o Super comfort seat with air suspension o Terminal holder o Steering wheel with twist grip o CD MP3 radio with hands-free system o Rear wiper and washer system o Electric battery disconnect switch o Machine control basic package for ISOBUS o 2-wire pneumatic brake system o Automatic trailer coupling with 38 mm bolts o Rear wheel load: 2 x 300 kg o Pivoting front fenders o Front tires: 540/65 R28 Trelleborg o Rear tires: 650/65 R38 Trelleborg Fendt Cargo 4X/75 front loader o Multi-coupler o 3rd control circuit o Double-acting damping system o EURO mounting Operating hours: 3850 h Transmission: Continuously variable transmission PTO speed 540/540E/1000 Front tires: 540/65 R28 Front tire tread depth: 60% Rear tires: 650/65 R38 4 double-acting control units 1 previous owner Top speed: 50 km/h 4 cylinders Rear tire tread depth: 60% Electric control units Price plus 19% VAT

Condition: new, Empty weight: 7.500 kg Cargo space capacity: 34.000 l Aerial platform: Yes Thickness of tanker walls: 6 Thickness of end walls: 5 mm Hjdpfx Ajw Nbrxeabsnu Thickness of partition walls: 4 Number of fillers: 1 THE TECHNICAL SPECIFICATION OF 60 TONS BOLTED SILO CAPACITY 60 Tons 38 m3(Cement density is accepted as 1.3 Kg / cm3) HEIGHT 8.300 mm WIDTH 3060 mm WEIGHT 7.500 Kg SILO FEET WIDTH Ø219.1*6 mm Pipe SILO FEET 4 Piece SILO FEET HEIGHT 4000 mm SILO FEET SHOES 15 mm Sheet Metal SILO FEET CROSS RAILING L70X70X7 Bracket CLAMP FLANGE Ø300 mm By Clamp Flange SILO FUNNEL SUPPLEMENT BEAM 100X10 mm SILO BODY SUPPLEMENT BEAM 100X10 mm SILO FUNNEL SHEET THICKNESS 5 mm SILO BODY SHEET THICKNESS 3 Piece 5 mm, 3 Piece 4 mm SILO COVER SHEET THICKNESS 4 mm THERE ARE A GUARDED SHIP LADDER OUTSIDE OF SILO THERE IS BARRIER AROUND THE TOP COVER OF SILO SILO FILLING PIPE IS 4 '' AND HAS SUPPLEMENT UP TO SILO FEET SILOS WILL BE PAINTED WITH EPOXY PRIMER ON INDUSTRIAL PAINT

Condition: used, overall weight: 36,000 kg, empty load weight: 8,418 kg, axle configuration: 3 axles, loading space length: 13,403 mm, loading space width: 2,490 mm, loading space height: 2,650 mm, loading space volume: 88 m³, first registration: 03/2021, next inspection (TÜV): 01/2026, suspension: air, color: white, tire size: 385/65 R22,5, Year of construction: 2021, mileage: 2,73,732 km, Equipment: ABS, Unladen weight: 8,418 kg, permissible total weight: 36,000 kg, certified load securing, cargo space (L x W x H): 13,403 mm x 2,490 mm x 2,650 mm. Tire size: 385/65 R22.5, DIN EN 12642 (Code XL) certificate, cargo space volume: 88 m³, 1st axle: , 2nd axle: , 3rd axle: , air suspension, underride guard, electronic braking system (EBS), two spare wheel holders, bolted chassis, double-deck EURO pallet system with beams, hubodometer, connectors 1x15-pin and 2x7-pin, antispray, international customs seal, telematics system. Find our complete vehicle portfolio on our website. Interested in financing? With our Value Added Service, we offer customized financing options, full-service and telematics solutions. We are happy to advise you. Hnodpfjw N Tlqox Aabju

Year of construction: 1999, condition: refurbished (used), A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Refurbished Pharmapaktor APC L200/50. Hedsi Hblmepfx Aabonu The Hosokawa Alpine APC L200/50 Pharmapaktor is the perfect compactor to test the product behaviour with this technology, while it even allows to keep a continuous production at small scale if needed. The Pharmapaktor can be fitted with a flake crusher to granulate the resulting compacted material increasing the possibilities of end product sizes and forms, from different sort of briquettes to granulates according to the required specification. Thanks to its flexibility, the machine can be adapted to different products and tasks. It even complies with the tough pharmaceutical standards. Compacting head Two cast stainless steel H-frames connected by spacer bolts. Two laterally foldable swing arms for easy and quick changing of the rollers. The swing arms are fixed with two tie rods, which also absorb the compressive forces of the compacting rollers. One chamber insert for guiding the product flow and two center pieces for sealing the rollers. Pre-compaction unit The pre-compaction unit is mounted on a supporting column and can be lifted and swivelled to the side. The charging hopper (with 2 brake bars) is equipped with a cylindrical/conical precompression screw. When the pre-compaction unit is lifted off, a limit switch switches off the compacting rollers and the screw. Construction materials: Non product contacted parts: stainless steel Product contacted parts: stainless steel Non pressure shock resistant (NPSR) Non ATEX (can be implemented for an additional price) Without vacuum deaeration (can be implemented for an additional price) Scope: Hosokawa Alpine Pharmapaktor APC L 200/50, including feeding, without Flake Crusher.

Condition: used, mileage: 5,76,763 km, power: 335 kW (455.47 HP), first registration: 03/2018, overall weight: 18,000 kg, fuel type: diesel, color: blue, fuel: diesel, brakes: retarder, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, Equipment: ABS, air conditioning, airbag, central locking, cooling unit, cruise control, parking heater, power assisted steering, soot filter, traction control, trailer coupling, D6G Automatic climate control, L1A Bi-xenon headlights, Q4Z Fifth wheel coupling, low-maintenance, lubricated lock, A1C Front axle 7.5 t, A1Z Front axle, cranked version, A2E Rear axle, ring gear 440, hypoid, 13.0 t, A2X Rear axle with active, regulated lubrication, B1B Electronic brake system with ABS and ASR, B1D Electronic air supply unit, medium, B1F Heating, electronic air supply unit, B2A Disc brakes on front and rear axle, B3H Secondary water retarder, B4A Condensate monitoring for compressed air system, B4L Compressed air tanks, complete aluminium, B5J Low-position brake and electrical connectors, C0G Rear frame overhang 1,050 mm, C1Q Wheelbase 3,550 mm, C5B Step plate over the frame, partial cover, C5D Rear access behind the cab, left side, C5P Bolted frame, C6C Steering, single-circuit, C6P Power steering pump, electronically regulated, C6Q Stabilizer, front axle, C7F Front underrun protection (ECE), aluminium, C7T Integrated rear, C8B Rear axle mudguards, 2,550 mm vehicle width, C8H Three-piece mudguard with EC spray protection, C8I EC spray protection, front, C8Y Aerodynamic underbody cladding, D0A Leather steering wheel, D0L Smoker package, D0S Compressed air connection in cab, D0U Smoke detector in cab, D1C Comfort driver's air suspension seat, D1N Functional passenger seat, D2N Driver's seat backrest quick-release, D2W Armrests both sides, passenger seat, D3B Comfort bunk below, D3M PremiumComfort mattress below, D3S Leather seat cover, driver's seat, D3T Velour seat cover, passenger and centre seat, D4T Curtains. You can reach us by phone Monday to Friday until 20:00 and Saturday until 16:00! Further information: Leasing/financing and trade-in possible! Subject to errors and prior sale! All information without guarantee ... more on our homepage Hedpfxoxnwl Rs Aabsnu

Condition: excellent (used), I am offering furniture roll containers / storage trolleys with the following dimensions: Width x Depth x Height: 2800 x 1110mm ✅ Current stock: approx. 300 units ✅ Additional sizes of furniture trolleys available on request. Hodoxmt H Uepfx Aabonu ✅ Each furniture roll container is completely refurbished (panel replacement, bolts). ✅ We provide a 1-year warranty on used furniture trolleys. • Carts without load can be folded and nested together. The furniture roll container is ideal for in-house transport and storage of almost all types of goods. All trolleys are in very good condition. Invoice provided, of course. Transport possible throughout Europe. KAM-KUB Logistic&Trolleys Europe – Your specialist for the sale and service of furniture roll containers in Europe.

Condition: new, functionality: fully functional, Year of construction: 2025, container length: 5.6 ft, color: grey, overall weight: 10,000 kg, maximum load weight: 9,216 kg, empty load weight: 784 kg, loading space volume: 7 m³, loading space width: 1,720 mm, loading space length: 3,740 mm, loading space height: 1,500 mm, Price on request. The price is ex stock 33106 Paderborn! Bulk discount available for the purchase of multiple containers. Leasing/hire purchase possible. 1 unit available directly from stock, RAL 3001 18 units available directly from stock, RAL 7043 12 units available at short notice, RAL colours of your choice Other designs and sizes available ex stock Paderborn. You are welcome to view our inventory on our homepage. Skip container according to DIN 30720 Technical specifications: • Internal dimensions: 3485 x 1720 x 1500 mm • Capacity: 7 cbm • Unladen weight: 773 kg • Base: 6 mm S 235 • Sides: 4 mm S 235 • All sheets and profiles continuously welded • Container inspected and approved according to DGUV 114-010 • Corner reinforcements • 3-way tipping bearing on both sides (bolt Ø45) • L-section stacking bar • Locking bar • Frame edges U-profile 80x50x4 • Interior and exterior zinc phosphate primer; exterior • finished with synthetic resin paint (80-100 μ) • Permissible total weight: 10,000 kg Errors and prior sale excepted. Photos are for illustration purposes only! Hsdsw D A Hhepfx Aabsnu For further inquiries, feel free to send us a message or call us.

Condition: new, Empty weight: 7.500 kg Cargo space capacity: 34.000 l Aerial platform: Yes Thickness of tanker walls: 6 Thickness of end walls: 5 mm Thickness of partition walls: 4 Number of fillers: 1 Hnsdpow I S U Uefx Aabsu THE TECHNICAL SPECIFICATION OF 60 TONS BOLTED SILO CAPACITY 75 Tons 55 m3(Cement density is accepted as 1.3 Kg / cm3) HEIGHT 8.300 mm WIDTH 3060 mm WEIGHT 7.500 Kg SILO FEET WIDTH Ø219.1*6 mm Pipe SILO FEET 4 Piece SILO FEET HEIGHT 4000 mm SILO FEET SHOES 15 mm Sheet Metal SILO FEET CROSS RAILING L70X70X7 Bracket CLAMP FLANGE Ø300 mm By Clamp Flange SILO FUNNEL SUPPLEMENT BEAM 100X10 mm SILO BODY SUPPLEMENT BEAM 100X10 mm SILO FUNNEL SHEET THICKNESS 5 mm SILO BODY SHEET THICKNESS 3 Piece 5 mm, 3 Piece 4 mm SILO COVER SHEET THICKNESS 4 mm THERE ARE A GUARDED SHIP LADDER OUTSIDE OF SILO THERE IS BARRIER AROUND THE TOP COVER OF SILO SILO FILLING PIPE IS 4 '' AND HAS SUPPLEMENT UP TO SILO FEET SILOS WILL BE PAINTED WITH EPOXY PRIMER ON INDUSTRIAL PAINT

Condition: used, mileage: 1,78,459 km, power: 350 kW (475.87 HP), first registration: 09/2022, overall weight: 18,000 kg, fuel type: diesel, color: blue, axle configuration: 2 axles, fuel: diesel, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, number of seats: 2, Equipment: ABS, air conditioning, airbag, central locking, navigation system, onboard computer, parking heater, power assisted steering, seat heater, traction control, D6G automatic air conditioning, A1C front axle 7'5 t, A1Z front axle cranked version, A2E rear axle crown gear 440' hypoid 13'0 t, B1B electronic braking system with ABS and ASR, B1F heating electronic compressed air supply unit, B2A disc brake on front and rear axles, B4A condensate monitoring for compressed air system, B4M compressed air tank steel, B5J brake and electrical connections low, C0G frame overhang 1050 mm, C1W wheelbase 3700 mm, C5D step behind driver's cab left, C5P frame bolted, C6G steering‚ servo twin, C6I power steering pump‚ regulated, C6Q stabilizer‚ front axle, C7F front underrun protection (ECE)‚ aluminum, C7T integral rear, C8C rear axle fender‚ 2500 mm vehicle width, C8H fender 3-part‚ with EC splash guard, C8I splash guard (EC)‚ front, C8Y underbody paneling‚ aerodynamic, D0A leather steering wheel, D0S compressed air connection‚ in the driver's cab, D0U smoke detector‚ in the driver's cab, D1C driver's suspension seat‚ comfort, D1N passenger functional seat, D2N seat back‚ release‚ Driver's seat, D3A comfort bed, top, wide, levelable, D3B comfort bed, bottom, D3M mattress, PremiumComfort, bottom, D3N mattress, PremiumComfort, top, D3Q seat cover, velours, driver's seat, D3T seat cover, velours, passenger seat, middle seat, D4S sun blind, 1-piece, electric, windscreen, D4T curtain, across front of bed(s), D4Z sun blind, side, driver and passenger side, D5Z carpet covering Engine tunnel, D6C electric auxiliary air conditioning, D6I residual heat utilization, D6M hot water auxiliary heating, we can be reached by phone Monday - Friday until 8:00 p.m. and Saturday until 4:00 p.m.!! More:!! Leasing/financing and trade-in possible!! Hodpeifv Tzsfx Aabenu !! !! -Subject to errors and prior sale!! -All information without guarantee ... more on our homepage

Condition: refurbished (used), Year of construction: 1999, Fully refurbished Hosokawa Alpine Pharmapaktor APC L200/30 used standalone system by Alpine Originals. Technical details: Construction materials: Non product contacted parts: stainless steel Product contacted parts: stainless steel Non pressure shock resistant (NPSR) Non ATEX (can be implemented for an additional price) Without vacuum deaeration (can be implemented for an additional price) Scope of supply: Hosokawa Alpine Pharmapaktor APC L 200/30, including feeding, without Flake Crusher. The Hosokawa Alpine APC L200/30 Pharmapaktor is the perfect compactor to test the product behaviour with this technology, while it even allows to keep a continuous production at small scale if needed. The Pharmapaktor can be fitted with a flake crusher to granulate the resulting compacted material increasing the possibilities of end product sizes and forms, from different sort of briquettes to granulates according to the required specification. Thanks to its flexibility, the machine can be adapted to different products and tasks. It even complies with the tough pharmaceutical standards. Compacting head Two cast stainless steel H-frames connected by spacer bolts. Two laterally foldable swing arms for easy and quick changing of the rollers. The swing arms are fixed with two tie rods, which also absorb the compressive forces of the compacting rollers. One chamber insert for guiding the product flow and two center pieces for sealing the rollers. Pre-compaction unit The pre-compaction unit is mounted on a supporting column and can be lifted and swivelled to the side. The charging hopper (with 2 brake bars) is equipped with a cylindrical/conical precompression screw. When the pre-compaction unit is lifted off, a limit switch switches off the compacting rollers and the screw. A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Hsdpfx Aaevq Nlxsbenu Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery

Condition: used, mileage: 1,34,926 km, power: 350 kW (475.87 HP), first registration: 03/2019, overall weight: 18,000 kg, fuel type: diesel, color: white, fuel: diesel, brakes: retarder, gearing type: automatic, emission class: euro6, suspension: air, number of seats: 2, Equipment: ABS, air conditioning, airbag, central locking, cooling unit, cruise control, parking heater, power assisted steering, soot filter, traction control, trailer coupling, D6G automatic air conditioning, A1C front axle 7'5 t, A1Z front axle cranked version, A2E rear axle crown gear 440' hypoid 13'0 t, A2X rear axle with active lubrication controlled, B1B electronic braking system with ABS and ASR, B1F heating electronic compressed air supply unit, B2A disc brake on front and rear axles, B3H secondary water retarder, B4A condensate monitoring for compressed air system, B4M compressed air tank steel, B5J brake and electrical connections low, C0G frame overhang 1050 mm, C1W wheelbase 3700 mm, C5B step plate above frame‚ partial cover, C5D step‚ behind driver's cab‚ left, C5P frame bolted, C6G steering‚ servo twin, C6P power steering pump‚ electronically controlled, C6Q stabilizer‚ front axle, C7F front underrun protection (ECE)‚ aluminum, C7T integral rear, C8B rear axle fender‚ 2550 mm vehicle width, C8H 3-part fender‚ with EC splash guard, C8I splash guard (EC)‚ front, C8Y underbody paneling‚ aerodynamic, C8Z side paneling‚ aerodynamic, D0A leather steering wheel, D0L smoker's package, D0S compressed air connection in the driver's cab, D1C driver's suspension seat comfort, D1N passenger functional seat, D2K massage function for driver's seat, D2N seat backrest release driver's seat, D2W armrests on both sides passenger seat, D3A comfort bed top wide levelable, D3B comfort bed bottom, D3M mattress PremiumComfort bottom, D3N mattress PremiumComfort top, D3Q seat cover velour driver's seat, D3T seat cover Velours‚ passenger seat‚ middle seat, D4S sun blind‚ ., We can be reached by phone Monday - Friday until 8:00 p.m. and Saturday until 4:00 p.m.!! More:!! Leasing/financing and trade-in possible!! !! !! -Subject to errors and prior sale!! -All information without guarantee ... more on our homepage Hnjdpfx Aasxnizksbou

Condition: excellent (used), Year of construction: 2019, I offer furniture cage trolleys / storage carts with the following dimensions: Width x Depth x Height: 1300 x 1150 x 1800mm ✅ Current stock: approx. 600 units ✅ Other sizes of furniture trolleys available on request. Hjdpfx Aexmt Eweabonu ✅ Each furniture cage trolley is fully refurbished (panel and bolt replacement). ✅ We provide a 1-year warranty on used furniture trolleys. • Triple stackable • Wheels made of 100% polyamide, 4 swivel castors, 1 wheel with directional lock • Empty trolleys can be folded and nested into each other The furniture cage trolley is ideal for in-house transport and storage of virtually all types of goods. Thanks to the triple stacking feature, the full warehouse height can be utilized optimally. All trolleys are in very good condition. Naturally supplied with invoice. Transport available throughout Europe. KAM-KUB Logistic & Trolleys Europe – Your specialist for sales and service of furniture cage trolleys in Europe.

Condition: new, mileage: 12 km, fuel type: gasoline, gearing type: other, overall weight: 7,490 kg, emission class: none, color: grey, driver cabin: day cab, suspension: other, Equipment: crane, - For sale: a loader crane for truck mounting Loader crane: equipped with 3 hydraulic extensions + mechanical extension (Country of manufacture: Italy) - Lifting capacity according to manufacturer: Max. 995 kg; 3.2 m = 815 kg, 4.40 m = 575 kg, 5.60 m = 400 kg, 6.80 m = 300 kg, 8.05 m = 220 kg - Built according to CE directive (EN 12999) – Slew range 370° (slew range limitation 190°) - All hydraulic cylinders double-acting - Piston rods hard-chromed - Pressure relief and load-holding valves - Emergency stop - Control block with 5 control valves - Separate hydraulic tank (33 l) with filter, mounted on crane base - Outriggers extendable on both sides, special outrigger system, outrigger width 3.10 m - Hydraulic outriggers swiveling 30° and 180° – CE compliant, incl. M.O.L. - Special paint finish RAL 7016 – all cylinders painted black - Load hook and mounting clamps - Vehicle voltage 12V - Radio remote control with 6 functions - Electronic modules for Danfoss S800 control block, 4 functions - Danfoss S800 control block, 5 functions, incl. high-pressure filter - Special outrigger system, outrigger width 3.10 m, 1 unit - Surcharge for shortened stabilizer legs by 80 mm - Mechanical jib N – lift 1.30 m (7.0 k) – surcharge for stainless steel bolts and stainless steel pipe clamps - Surcharge for Dinitrol application (cavity protection) - Zinc primer ... VAT can be shown, cab: local sale, crane, new, hydraulics, consumption: 0.0/0.0/0.0 l/100 km (combined/urban/extra-urban) Hnodpfoxcfz Aox Aabou

Condition: used, Faceplate made of cast steel, probably PUT (Poland), with 4 individually adjustable clamping jaws. Type PUUf-M400C6ZJ, No: 3033. Diameter: 400 mm. Inner diameter: 100 mm. Mounting: short taper DIN 55022 size 6 with 4 M12 mounting bolts. Taper mounting: Ø approx. 106 mm. - 1 set of reversible stepped jaws for turning and drilling. Weight: 56 kg. In good condition. Hedpjxf Uxcefx Aabenu

Condition: repair required (used), AGET FT 40-D1-SP filter exhaust unit We have 2 identical units AGET DUSTKOP After-Filters improve air quality and provide a safer working environment by removing fine dust particles from the exhaust airstream. They are generally used to filter dust not removed by a cyclone, yielding breathable, clean air that can be recirculated back into the work area, where allowed. • High efficiency woven fabric filter material • Standard 5” diameter cotton sateen filter tubes with positive sealing snap-ring cuff • Standard shaker mechanism (manual or motorized) Hodsg Tivpepfx Aabenu • Component bolt-together design and construction • Supporting structural steel unit frame on open units • Sheet metal uni-body construction on enclosed units • Weather-resistant powder-coated finish • Heavy duty industrial grade construction • Standard 3-year warranty on filter tubes with the purchased unit and completed application review Capacity range: 300 – 7000 CFM (CFM dictated by dust) Common applications: Woodworking, metalworking, plastics, pharmaceuticals, powdered chemicals, and food processing Woven fabric filters material yields extremely high filtration efficiency, and is intermittently reconditioned by the integral shaker mechanism, operated either manually or automatically. Collected dust is deposited into a dust storage container, selected to meet specific application requirements. • Standard dust bin • Dust bin drawer(s) • One 55 gallon drum– 7.3 cu. ft. Price Euro 2.000 +VAT for both units, negotiable Delivery condition, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, Double-sided cantilever rack for bar stock (custom-built) Height: 1.9 meters Rack length: 4.3 meters Frame spacing: 2000 mm Arm depths: 600 / 500 / 450 and 400 mm Load capacity per arm: approx. 200 kg Hnsdpfxsxf Ut Ho Aabsu Load capacity per level (per bay with 3 uprights): approx. 600 kg Total load capacity with 3 uprights: approx. 4800 kg Base width: 1000 mm - 3 uprights = 2 bays = Ideal for 6 meter bar stock - Uprights made of 100 x 50 x 9 mm U-profile - Support arms made of 100 x 50 x 7 mm U-profile - 8 arms per upright (total 24 welded arms) - 3 double-sided uprights with base - Bolted upright connectors made of rectangular tube - Diagonal bracing is missing Assembled dimensions (L x W x H): 4400 x 1450 x 1900 mm Transport dimensions (L x W x H): 2100 x 1500 x 500 mm Total weight: 350 kg

Condition: used, Vertical milling head, milling head, angle milling head MAHO suitable for MH300 or MH400. Year of manufacture approx. 1990. Tool holder: SK 40. Quill stroke: 60 mm. Centering diameter on the flange plate: 102 mm. Outer diameter of flange: 180 mm. Bolt circle on flange plate: Ø 150 mm. Mounting holes on flange plate: 4x Ø 11 mm. - Quill feed: 0.015 / 0.03 / 0.06 / 0.12 mm/rev. - Head drive via shaft Ø 32 with 10 mm keyway. - Knurled wheel with scale for quill stroke. - Angle scale on angle milling head 2x 90°. Dimensions L x W x H: 300 x 280 x 300 mm. Total weight: 31.4 kg. In good condition. Hjdpfx Aaoxf Ur Njbjnu

Condition: used, Adjustment unit with 2 positioning tables featuring hand crank adjustment - made from aluminium system profiles. Linear unit, linear axis, loading unit, linear guide Manufacturer: Custom-built Year of manufacture: 2000 Track length: 3600 mm Travel distance: 2750 mm Table size: 590 x 355 mm Usable table area with index: 470 x 355 mm Tabletop material thickness: 30 mm (steel) Aluminium system profile rail, length: 3600 mm (profile length) Aluminium system profile, cross-section: 80 x 80 mm (base rail for guide) Aluminium system profile rail, cross-section: 123 x 120 mm (front) Height to top of tabletop above floor: 640 mm Height to top of linear guide carriage above floor: 615 mm Height to top of aluminium system profile 80 x 80 mm above floor: 575 mm - Stable and torsion-resistant construction made from aluminium system profiles (80 x 80 mm) and steel feet - For handwheel adjustment, a rack is bolted to the aluminium system profile rail Hnsdpoxf Uq Eofx Aabju - Hand crank adjustment via gear and rack, individually for each table - Spring-loaded index pin for fixed indexing, unlockable by hand lever - Adjustable index plates on the aluminium system profile rail - Standard linear guide width = 28 mm, height = 26 mm Overall dimension L x W x H: 3640 x 900 x 780 mm Weight: 450 kg Good condition