Used Tightening Bolts for sale (1,938)

Condition: used, Used Netzsch model PMB VC2500 stainless steel variable capacity pre-mix disperser. Approximately 600-2500 litre working capacity. Unit has welded base and bolted dished top head. Has top entry stainless steel 3-tier 4-blade pitched paddle agitator direct driven by 7.5kW, 415 Volt, 3/50, 1435rpm motor via Renold model PM60 gearbox rated 48.2/1 reduction ratio. Unit has bottom entry stainless steel scraped surface agitator belt driven by 7.5kW, 3/50, 1,440rpm motor via Renold model SMH8 gearbox rated 25/1 reduction ratio. Has external heating/cooling jacket. Unit has bottom discharge. Lhedpfx Akjy Ddv Dofof

Condition: used, Year of construction: 2016, total length: 29,385 mm, total height: 3,180 mm, total width: 13,884 mm, load capacity: 400 kg, clearance between the columns: 5,000 mm, working height: 3,000 mm, overall weight: 20,000 kg, space requirement height: 3,500 mm, space requirement length: 30,000 mm, load capacity per storage section: 400 kg, space requirement width: 14,000 mm, Custom-designed industrial mezzanine in structural steelwork, complete with technical and structural documentation. The structure is brand new, never installed, currently dismantled and stored, with all original components present. Dimensional specifications: • Floor area: approx. 330 m² • Maximum overall dimensions: 29.4 m × 13.9 m • Walking surface height: approx. 3.18 m • Configuration: irregular geometry (custom structure, see technical drawings) Load-bearing structure • Structural steel frame construction • Main beams: IPE profiles 360 / 400 / 450 / 500 • Secondary beams: IPE profiles 200 – 300 • Columns: structural tubular sections up to 200×200 mm • High-strength bolted connections • Base plates pre-drilled for anchoring Decking • Galvanized profiled composite sheet metal • Prepared for concrete topping • Design load capacity: uniformly distributed load approx. 400 kg/m² Included accessories • Access staircase structure (steel stringers) • Safety guardrail components • Base plates, brackets, and connecting elements Condition and supply • Condition: NEW • Never assembled • Complete with all original parts • Currently dismantled and in storage • Ready for transport and reassembly Technical documentation • Full structural calculation report • Detailed execution drawings and construction layouts • Materials report • Documentation signed by a licensed engineer Technical notes • Structure designed in compliance with current technical regulations Lhodpfxjy Eivfj Akfof • Structure fully dismantled, delivered on lorry, transport at buyer’s expense • Weight approx. 20 tons • Available for inspection by appointment

Condition: used, empty load weight: 8,980 kg, maximum load weight: 26,020 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,410 mm, loading space width: 2,490 mm, loading space height: 2,650 mm, loading space volume: 88 m³, suspension: air, tire size: 385/65 R22,5, color: white, Year of construction: 2018, Equipment: ABS, Tare weight: 8980kg, GVW: 35000kg, Loading area (L W H): 13,410 mm x 2,490 mm x 2,650 mmTyre size: 385/65 R22.5, Loading area volume: 88 m³, 1st axle: , 2nd axle: , 3rd axle: , Air suspension, Rear underrun, Lift axle, Pallet box, Electronic Brake System EBS, Toolbox, Spare wheel carrier double, Bolted chassis, Temperature recorder, Doubledeck with crossbars, 1x15 and 2x7 pin plug, Antispray, Telematics system, Dynamic ramp protection (DRP), Please find an overview of all vehicles available on our website . Finance required? We offer individual financing solutions, full service contracts and telematic-services. We would be glad to advise you personally. Lhsdpfeyy E D Iox Akfef

Condition: new, Year of construction: 2026, The ZX 7045E 230V milling/drilling machine is a versatile tool for machining steel . It is ideal for drilling, reaming, boring, threading , milling and face milling. The machine allows precise drilling of holes in cast iron up to 45/40 mm in diameter. In addition, bolts up to M12 mm can be threaded, up to 80 mm wide can be milled and rebates up to 22 mm deep can be made. The ZX 7045E milling/drilling machine is a reliable tool ready to go! Machine characteristics Heavy Stable Cast Iron: The robust construction based on heavy cast iron ensures stability and durability of the machine even during intensive use. Milling machine height adjustable on the slide: The unique height adjustment on the slide, rather than on the column, allows the machine to be adapted to different applications. Massive Cross Table for Milling/Drilling Machine: An impressively sized table with a precision-ground surface provides a solid base for a variety of projects. Swallow Tail Shaped Guides: Innovative dovetail-shaped slides guarantee smooth movements in three axes for excellent machining results. Quiet Operation Thanks to Ground Gear Wheels: The ground gears make the machine run quietly, which contributes to comfort in the workshop. Left and Right Rotation: Rotate the tool in both directions, adapting to different tasks. Pivoting head +/- 90 degrees and Adjustable head height: Flexibility in angle setting and height adjustment allow full control over material processing. Additional Options, Additional Benefits: The ZX 7045E version is available from stock and you will also receive a kit free of charge: Drill chuck Reduction bush MK4/MK3 Reduction bush MK3/MK2 The ZX 7045E milling/drilling machine is not just a tool, it is a partner that can meet even the most demanding challenges in your workshop. Order now and experience perfect precision and performance! (Base available as an option) Technical data Maximum drilling diameter 45 mm Maximum face milling diameter 80 mm Maximum cylindrical milling cutter diameter 28 mm Maximum thread diameter 12 mm Spindle pin protrusion 100 mm Spindle taper MT4 Spindle speed (6 speeds for 1400r/min motor) 1400r/min ) 95, 170, 280, 540, 960, 1600min-1 Maximum distance from spindle nose to table 460 mm Travel in X / Y / Z axis 500 / 210 / 425 mm Distance from spindle to column surface 245 mm Work table dimensions 730x210 mm Base dimensions 400x600 mm Motor s1/s6 1500W/2100 W 230V Machine dimensions (height with base) 1080 x 770 x 1460 mm Weight 278 kg Lsdpfx Aownb T Ijkfshf Available accessories MK3/B18 drill chuck shank handy tools drill chuck 3-16 mm/B18 reduction sleeve MK4/MK3 reduction sleeve MK3/MK2

Condition: new, Year of construction: 2026, The ZX 7045E milling/drilling machine is a versatile tool for machining steel . It is ideal for drilling, reaming, boring, threading , milling and face milling. The machine allows precise drilling of holes in cast iron up to 45/40 mm in diameter. In addition, bolts up to M12 mm can be threaded, up to 80 mm wide can be milled and rebates up to 22 mm deep can be made. The ZX 7045E milling/drilling machine is a reliable tool ready to go! Machine characteristics Heavy Stable Cast Iron: The robust construction based on heavy cast iron ensures stability and durability of the machine even during intensive use. Milling machine height adjustable on the slide: The unique height adjustment on the slide, rather than on the column, allows the machine to be adapted to different applications. Massive Cross Table for Milling/Drilling Machine: An impressively sized table with a precision-ground surface provides a solid base for a variety of projects. Swallow Tail Shaped Guides: Innovative dovetail-shaped slides guarantee smooth movements in three axes for excellent machining results. Quiet Operation Thanks to Ground Gear Wheels: The ground gears make the machine run quietly, which contributes to comfort in the workshop. Left and Right Rotation: Rotate the tool in both directions, adapting to different tasks. Pivoting head +/- 90 degrees and Adjustable head height: Flexibility in angle setting and height adjustment allow full control over material processing. Additional Options, Additional Benefits: The ZX 7045E version is available from stock and you will also receive a kit free of charge: Drill chuck Lhodpjud Iztofx Akfef Reduction bush MK4/MK3 Reduction bush MK3/MK2 The ZX 7045E milling/drilling machine is not just a tool, it is a partner that can meet even the most demanding challenges in your workshop. Order now and experience perfect precision and performance! (Base available as an option) Technical data Maximum drilling diameter 45 mm Maximum face milling diameter 80 mm Maximum cylindrical milling cutter diameter 28 mm Maximum thread diameter 12 mm Spindle pin protrusion 100 mm Spindle taper MT4 Spindle speed (6 speeds for 1400r/min motor) 1400r/min ) 95, 170, 280, 540, 960, 1600min-1 Maximum distance from spindle nose to table 460 mm Travel in X / Y / Z axis 500 / 210 / 425 mm Distance from spindle to column surface 245 mm Work table dimensions 730x210 mm Base dimensions 400x600 mm Motor s1/s6 1500W/2100 W 400V Machine dimensions (height with base) 1080 x 770 x 1460 mm Weight 278 kg Available accessories MK3/B18 drill chuck shank handy tools drill chuck 3-16 mm/B18 reduction sleeve MK4/MK3 reduction sleeve MK3/MK2

Condition: used, empty load weight: 6,494 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 09/2019, next inspection (TÜV): 07/2026, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,950 mm, loading space volume: 99 m³, suspension: air, tire size: 435/50 R19,5, color: silver, Year of construction: 2019, mileage: 5,34,603 km, Equipment: ABS, Unladen weight: 6,494 kg, permissible total weight: 36,000 kg, load securing with certificate, cargo area (L x W x H): 13,620 mm x 2,480 mm x 2,950 mm. Tire size: 435/50 R19.5, certificate DIN EN 12642 (Code XL), cargo area volume: 99 m³, 1st axle: , 2nd axle: , 3rd axle: , air suspension, underride guard, electronic braking system (EBS), bolted chassis, sliding roof, connector plugs 1x15 and 2x7 pin, antispray, hydraulic lifting roof, telematics system. You can find our complete range of vehicles on our website. Interested in financing? With our Value Added Service, we offer you tailor-made financing options, full service and telematics solutions. We are happy to advise you. Lhjdpfx Aey Er R Eokfef

Condition: new, empty load weight: 9,039 kg, maximum load weight: 29,961 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 13,403 mm, loading space width: 2,490 mm, loading space height: 2,650 mm, loading space volume: 88 m³, suspension: air, tire size: 385/65 R22,5, Year of construction: 2026, Equipment: ABS, Unladen weight: 9,039 kg, permissible total weight: 39,000 kg, cargo space (L x W x H): 13,403 mm x 2,490 mm x 2,650 mm, tire size: 385/65 R22.5, cargo volume: 88 m³, 1st axle: , 2nd axle: , 3rd axle: , air suspension, underride guard, front lift axle, pallet box, electronic brake system (EBS), spare wheel carrier (2x), bolted chassis, portal doors, ISO bulkhead without fan, temperature recorder, connector 1x15 and 2x7 pin, antispray, international customs seal, telematics system, tire pressure monitoring, dynamic ramp protection (DRP), multi-function floor. You can find our complete vehicle range at . Interested in financing? With our Value Added Service, we offer you individual financing options as well as full-service and telematics solutions. We are happy to advise you. Lhedpfjy Er N Uex Akfef

Condition: used, Year of construction: 2020, Ref. No. 26086 Technical Data: - Length: 2400 mm - Width: 1200 mm - Plate height: 200 mm - Wall thickness: 25 mm - Hole diameter (bores): approx. 28 mm Lhjdpfx Aksy Efm Tjfsf - Hole spacing (center to center): approx. 100 mm - Table height: approx. 850 mm - Table height adjustable - 16 pc. clamp-on screw clamps with clamping bridges - Approx. 22 clamp-in connecting bolts - 6 pc. stop and clamping angles approx. 175 x 175 mm - 2 pc. stop and clamping angles approx. 300 x 200 mm - 8 pc. stops with elongated hole and hole 225 x 50 x 20 mm - 2 pc. stops with elongated hole and hole 225 x 50 x 25 mm - 6 pc. stops with elongated hole 150 x 50 x 20 mm - 2 pc. stops with elongated hole 150 x 50 x 25 mm - Total weight approx. 1000 kg

Condition: used, mileage: 39 km, power: 150 kW (203.94 HP), fuel type: electric, first registration: 03/2026, color: blue, number of seats: 5, Equipment: ABS, air conditioning, navigation system, * 30-color ambient lighting * Armrests for front seats on both sides * Heated windshield in heat-insulating glass * Lumbar support, pneumatically adjustable on both sides * Seat heating for both seats in the cab, separately adjustable left and right * App-Connect incl. App-Connect Wireless for Apple CarPlay and Android Auto * 9 speakers (5 speakers at the front and 4 speakers at the rear) * Digital radio reception (DAB+) * "Comfort" cell phone interface with inductive charging function * "Discover Pro" navigation system * Anti-lock braking system (ABS) * Airbags for driver and front passenger, with front passenger airbag deactivation * Automatic distance control ACC "stop & go" with speed limiter * Anti-theft alarm system with interior monitoring, back-up horn and towing protection * Travel Assist driver assistance system including Lane Assist lane departure warning system and Emergency Assist * Front Assist emergency brake assistant with pedestrian and cyclist detection * Automatically dimming interior safety mirror * Proactive occupant protection system in conjunction with Front Assist * Electromechanical power steering, speed-dependent control * Rear view camera * Intermittent windshield wipers with rain sensor * "Side Assist" lane change assistant * Traffic sign recognition * 11 kW AC charging power (alternating current) * USB-C interfaces * 4 "Solna" alloy wheels 8 J x 20 at the front, with 10 J x 20 at the rear, in black, high-sheen finish * Folding towbar, with electric unlocking system * Changing the surround of the infotainment display, central controls and steering wheel from electric white to black * "Plus" assistance package including "Area View" with "Rear View" reversing camera * Evasion support and cornering assistant * Convex exterior mirrors on driver's side, convex on passenger's side Ledpfx Ajwz T Epskfshf * Electrically adjustable, folding and heated exterior mirrors, with lowering front passenger mirror * Three-point automatic front seat belts with belt tensioners and height adjustment * Dynamic high beam control "Dynamic Light Assist" for LED matrix headlights * Black surround for the infotainment display and central controls * Electric tailgate (opening and closing) with "Easy Open" and "Easy Close" function * Electric motor system output 150KW Basic motor is: N06/N07 * Transmission for electric drive (1-speed) * HT - LED matrix headlights with automatic headlight switching, bad weather light, welcome function * Air Care Climatronic air conditioning system with active combi-filter, stationary air conditioning and 2-zone temperature control * Comfort seat left and right, in the 1st row of seats * Short wheelbase, hatchback * LED luggage compartment lighting * Light alloy wheels "Solna" 8 J x 20 front, 10 J x 20 rear, in black, high-sheen finish * Headlight range adjustment, dynamic, with dynamic cornering lights * Memory function for "Park Assist Plus" parking assistant * Multifunction steering wheel in imitation leather, with touch controls, heated * LED tail lights with dynamic blinker lights * Park Assist Plus parking assistant incl. parking aid * "Ready 2 Discover" radio with 30.48 cm (12") touch color display * Wheel bolts with extended anti-theft protection * Rear View reversing camera as an alternative to the Area View in the "Plus" assistance package * Rear windows in darkened heat-insulating glass * Electric sliding door left & right * Tire monitoring display

Year of construction: 2023, condition: new, With bolted,welded and horizontal types, silos are used in storing cement,fly ash,bentonite and other bulk materials. Ledpfxogavace Akfshf Welded Silos Welded silos are preferred in low capacities of storage, it can be assembled and operated in 2 hours with one crane. It is preferred in local solutions where transportation costs can be neglected. Semix is able to manufacture welded silos in a range between 50 to 150 tons. Bolted Silos Bolted silos are preferred due to its' compactness for transportation. It can be transported with containers for avoiding freight costs. Because of its modularity, Semix is able to manufacture welded silos in a range between 100 to 2000 tons. Semix provides a mechanical supervisor for assembling the bolted silo correctly. Semix have succeed to install bolted silos in Peru, Israel, Germany and United Kingdom.

Condition: used, empty load weight: 9,649 kg, maximum load weight: 32,351 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 06/2023, next inspection (TÜV): 04/2027, loading space length: 13,403 mm, loading space width: 2,490 mm, loading space height: 2,700 mm, loading space volume: 90 m³, suspension: air, tire size: 385/65 R22,5, wheelbase: 1,310 mm, color: white, Year of construction: 2023, Equipment: ABS, Tare weight: 9649kg, GVW: 42000kg, Pharma certificate, Loading area (L W H): 13,403 mm x 2,490 mm x 2,700 mmTyre size: 385/65 R22.5, Loading area volume: 90 m³, 1st axle: , 2nd axle: , 3rd axle: , Air suspension, Rear underrun, Lift axle front, Self-levelling suspension, Electronic Brake System EBS, Toolbox, Ferry lashings, Bolted chassis, ISO partition wall without ventilators, Temperature recorder, Double deck with beams, 1x15 and 2x7 pin plug, Antispray, Telematics system, Tyre pressure control, Multifunctional floor: 5500kg, Please find an overview of all vehicles available on our website . Finance required? We offer individual financing solutions, full service contracts and telematic-services. We would be glad to advise you personally. Lhodpfx Akeyzva Asfjf

Condition: new, 4th axis incl. control for: Milling, grinding, testing/measuring; engraving IDEAL also for "machines in training" Technical data: Center height: 110 mm Spindle nose: HSK 63 taper, outer ø 70 mm 0/-0.005 mm Clamping torque: 250 Nm Concentricity and axial run-out: 0.006 (optional: 0.003 mm or 0.002 mm) Max. transport load: (limited by motor) without support: 40 kg (only if turntable is bolted down) with support: 80 kg Total weight, approx.: 25 kg Version: - Stepper motor - motor-dependent, backlash-free toothed belt drive including correct pre-tensioning - With automatic spindle clamping with 6 bar compressed air - Fully sealed to IP 67 - Sensor system with LEDs, data logger and microprocessor, e.g. for status monitoring and display - Service display - Data history for root cause analysis - Remote diagnosis - Axis signals 'Limit+ / Limit -' (e.g. for swivel axis) - Data output via USB slot - Alignment sliding blocks 14h6, 1 pair - Alignment sliding blocks 18h6, 1 pair Lhedpfx Akerxcu Sjfjf Cable set 3m: - All cables and hoses routed in quality protective conduit - Pre-assembled, all cables shielded in accordance with regulations, incl. matching plugs Accessories / options: - ControlTablet - quality tablet with Mutlitouch, Windows 11Pro; software pre-installed - QuickControl software - "professional" range of functions; smallest display unit-0.0001°; 2 outputs, 6 inputs - QuickConnect - Direct cable connection to the machine control unit

Condition: new, functionality: fully functional, empty load weight: 583 kg, maximum load weight: 2,117 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 4,060 mm, loading space width: 2,110 mm, maximum speed: 100 km/h, trailer brake: trailer braked, Year of construction: 2026, MARTZ GT Plateau 400/2 2.7T NEW VEHICLE Internal dimensions: 406 cm x 211 cm Gross weight: 2,700 kg Payload: 2,117 kg Braked tandem trailer Overrun brake and handbrake by KNOTT 2 x 1,350 kg axles and brakes with automatic reverse function Low-profile chassis Bolted, hot-dip galvanized steel frame Steel ramps in the rail compartment Support load Multiple tie-down lashing points along the entire length Reinforced 10" C-grade tires with steel valve M+S (mud and snow) tires 13-pin connector Front marker lights Rear lamps with reversing light, fog light, and triangular reflectors Lamps and license plate holder are foldable Winch with brake and bracket 2 x wheel chocks 15 mm thick, durable, anti-slip phenolic plywood floor OPTIONAL ACCESSORIES PERMANENTLY DISCOUNTED FROM FEBRUARY 2026 - 100 km/h equipment (shock absorbers) - Spare wheel with holder - Full LED lighting - Anti-theft device - Swap steel track for aluminum track - Swap 10" tires for 13" tires - Wheel stops Lodpfoxp U A Ajx Akfjhf - Foldable rear support cranks - Anti-sway coupling - Side railing - 30 cm aluminum side panels - 30 cm aluminum extension side panels - 150 cm high tarpaulin - Full-width wheel stop Additional accessories available on request! Plus freight to Gera and vehicle registration certificate: €250 net Images are for illustration purposes and may show optional accessories at extra cost. Haven’t found the right trailer yet? We have 50–100 vehicles in stock, available immediately for pickup. The workshop is open weekdays from 8:00 to 17:00 for all types of repairs. Specialist in axle repairs, including for caravans. We also offer a large selection of spare parts and accessories for trailers from various manufacturers. We also have a wide range of rental trailers available. Visit us online or stop by in person!

Condition: new, functionality: fully functional, empty load weight: 128 kg, maximum load weight: 622 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 2,010 mm, loading space width: 1,067 mm, loading space height: 400 mm, total length: 2,910 mm, total width: 1,500 mm, total height: 900 mm, maximum speed: 100 km/h, trailer brake: trailer unbraked, Year of construction: 2026, Martz HIT 200 Tipper NEW VEHICLE Internal dimensions: 201 cm x 106 cm Gross weight: 750 kg Payload: 622 kg Side wall height: 40 cm Unbraked single-axle low-bed trailer Removable side walls made of galvanized steel sheet Rear and front panels foldable and removable Easily convertible to a flatbed transport platform Bolted and galvanized steel frame Folding drawbar Phenolic plywood floor 13-pin electrical system Rear lights with reversing light, fog light, and triangular reflectors Plastic fenders Jockey wheel 13-inch M+S tires The trailer can be stored vertically on the rear panel when not in use Optional accessories: - 100 km/h upgrade - Rear support stands - Mesh sides - Side extension panels 40 cm - Aluminum lid with holder (e.g., for bicycle carriers) Lhodpfoy Dq Dhsx Akfof - Flat tarpaulin with or without bows - High tarpaulin 80 cm - Coarse or fine mesh net - Spare wheel with holder - Loading ramps Additional accessories available on request! Images are for illustration purposes and may show optional equipment subject to extra charge. Plus vehicle registration documents and shipping to Gera €100 net Haven't found the right trailer yet? We always have 50-100 vehicles in stock and ready for immediate pickup. The workshop is open on weekdays from 8:00 to 17:00 for all types of repairs. Specialist in axle repairs, including for caravan trailers. Large selection of rental trailers. We also offer a wide range of spare parts and accessories for trailers of all manufacturers. Get expert advice by phone, visit our website, or stop by in person.

Condition: new, functionality: fully functional, empty load weight: 169 kg, maximum load weight: 581 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 2,300 mm, loading space width: 1,550 mm, trailer brake: trailer braked, Year of construction: 2026, MARTZ GP 3 Premium NEW VEHICLE Internal Dimensions: 230cm x 155cm Gross Weight: 750 kg Payload: 581 kg Unbraked Single-Axle Low-Loader Bolted and galvanized steel frame Folding drawbar 13-pin electrical system Plastic mudguards Lhedsww Diqepfx Akfjf Jockey wheel 13-inch M+S tires 3x Motorcycle wheel chocks Loading ramp Multiple lashing points Front marker light Rear lights with reversing light, fog light, and triangular reflectors Optional accessories: -100 km/h upgrade -Rear supports -Spare wheel with bracket -Anti-slip plywood floor -Aluminum floor -Toolbox Further accessories available on request! Images are for illustrative purposes and may show optional equipment subject to surcharge. Plus registration documents and freight to Gera: €100 net Haven’t found the right trailer yet? We have 50–100 vehicles permanently in stock and ready for immediate collection. The workshop is open Monday to Friday from 8:00 am to 5:00 pm for repairs of all kinds. Specialist in axle repair, also for caravans. Ijbquowvi Ehopd Nfean Large selection of rental trailers available. In addition, we offer a wide range of spare parts and accessories for trailers of all manufacturers. Get advice by phone, visit our website, or stop by in person.

Condition: new, functionality: fully functional, Year of construction: 2026, We are a renowned European manufacturer of Long Reach booms. Our booms are custom-built for your specific machine (individually tailored to fit a particular model) and come equipped with hydraulic pipes (hoses), bolts, steel and bronze bushings, as well as the bucket closing cylinder. The boom cylinder is not included in the offer—however, the majority of our clients use the original cylinder from their existing arm. Upon request, we can supply a used and refurbished boom cylinder. If you require a different length or want to extend the reach of another machine, please send us your specific request! We offer booms for machines ranging from 14 to 80 tons—compatible with brands such as Volvo, CAT, Doosan, Atlas, Kobelco, Hitachi, and more. Upon request, we can organize transportation for you, including all shipping and required customs documents. Our Long Reach booms are manufactured from S355J2 steel, available in a two-cylinder ("triangle") configuration, enabling full extension of reach without shortening, as well as in a single-cylinder ("banana") configuration, designed for applications demanding higher-duty performance. All machined components (pins, bushings) undergo heat treatment (hardening, carburizing). Each boom set includes: - Arms - Bucket closing cylinder - In the "triangle" variant: boom cylinders - Tubes and hydraulic hoses - Centralized lubrication for hard-to-reach points - Optionally, at extra cost: a suitably sized digging or grading bucket The booms are painted in colors matched to your machine and come with warning and information labels. Lhjdpeyf Apksfx Akfef The listed price refers to a 14-meter boom, suitable for machines from 18 to 29 tons.

Condition: used, axle configuration: 3 axles, first registration: 02/2011, loading space length: 7,585 mm, loading space width: 2,350 mm, loading space height: 1,500 mm, loading space volume: 27 m³, Chassis: Aluminium, reinforced design Two fully automatically welded I-beam longitudinal members with welded crossmembers, 1,600 mm chassis width Axles and Suspension - "430 mm off-road disc brakes" DOA axle assemblies, 3 x 9 t with DC air suspension, first axle liftable with starting aid (Wabco system), Wabco Smart Board, raise and lower valve. Tyres and Wheels: 6 wheels with GreBe 385/65 R 22.5 tyres, approximately 90-100% tread on ALCOA aluminium rims, 11.75x22.5 ET 120 King Pin: 2" bolted into a 10 mm thick plate Landing Legs: 1x aluminium drop-leg landing gear for uncoupling the empty trailer Brake System: To E.C. standards, two-line Wabco system, spring-actuated parking brake acting on two axles and Wabco EBS-E system with RSS (Roll Stability Support), aluminium air tanks Electrical System: Built to StVZO guidelines, with 2x LED five-chamber lights (Aspöck system), 24V installation with two 7-pin sockets and one 15-pin socket, LED side marker lights, 2 separate halogen reversing lamps Tipping Body / Hopper – Conical Floor Construction: Aluminium hopper design with trapezoidal floor and rectangular top rail, fully assembled and welded from patented profiles and aluminium plates, side walls of 4 mm aluminium 5086H24, floor 8 mm in a high-abrasion alloy (5383H34), two strong top rail profiles fully welded to the side walls. Front wall sloped at 20°, 4 mm thick; rear wall approx. 20° slope, swinging tailgate in smooth design without chute, tailgate resting, double-pivot hinges flush with top rail, automatic pneumatic central locking with two locking hooks, tailgate clamps on hopper, rear overhang suitable for paver applications. Hydraulic System: Hydraulic cylinder mounted on the front wall, working pressure of 150 bar, with approx. 2.5 m hose and 1" quick-release half-coupling, tipping angle approx. 48-49° Accessories: 6 Parlok mudguards, 2 "STAS" swinging mud flaps, 2 wheel chocks, robust folding underrun protection with impact guard, 1 central chain, 1 aluminium roof bow, additional inclinable aluminium bow in front of tailgate, 1 plastic toolbox, Cramaro sliding tarpaulin electrically operated with remote control, 2 Ferry eyes at rear frame (for rope attachment), 3 m aluminium ladder, shovel holder inside front wall, nearly new plastic wear linings on side and front walls! (Original cost approx. €5,800), shovel & broom holder left on frame, etc. Unladen weight: 5,030 kg Ledpoy Ekx Iofx Akfehf Offer and images non-binding.

Condition: new, power: 397 kW (539.77 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 4,000 mm, loading space width: 2,480 mm, Year of construction: 2025, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Brand new Volvo 8x2 with an F2150RAL Fassi loading crane including fly jib and hydraulic winch Equipment as per building description Chassis: (New model 2024) • Manufacturer/Type: Volvo FH 540 8x2, wheelbase 4900 mm • For detailed vehicle equipment, please refer to the enclosed documents. • Driver’s cab GLOBE • 1 x oil pump type: Sunfub • New MOT / emissions test Lhsdpfxowtb Rqs Akfef • Initial inspection, error reading, and parameterization of the vehicle. • If necessary, day registration with all entries. • Light bar • LED brown/brown • LED • Rotating beacons on the roof • Complete control of the warning lighting (heavy transport/tow truck type) Superstructure: • Carrying out all chassis work required for crane installation, disassembly and assembly of attachments, exhaust system, tanks, etc. Adaptation of the vehicle frame. • All chassis and bodywork are carried out in accordance with the installation guidelines of each chassis manufacturer and in the best quality. • Complete assembly of a specially designed and manufactured auxiliary frame made from fine-grained steel for crane and body. The auxiliary frame, welded and bolted to the vehicle chassis frame, guarantees extremely high torsional rigidity and perfect stability of the crane vehicle. The unique feature is the design of the auxiliary frame. Produced to the highest quality and painted in an RAL colour to be specified during order clarification. • Mounting/bolting the crane and main support carrier to the auxiliary frame. Installation of all hydraulic and electrical connections. Installation location: Front • Platform configuration as steel/welded construction, REMOVABLE platform, • Length approx. 4000 mm x width x 2480 mm. • Platform body steel / sandblasted / repainted, • RAL colour to be specified during order clarification. • Detachable aluminium side panels Brand Suer, 400 mm high, anodized version • Standard platform floor with welded steel checker plate, 4 mm, painted. • 8 x retractable lashing eyes per side 2000 daN, flexible profile/arrangement. • 2 x MULTISAFE stake pocket rows per approx 600 mm (per side) • 2 x retractable lashing eyes per side 6500 daN • Sturdy front wall made from welded frame, welded-on 4 mm steel plate and 5x accessory hooks, front wall height 1300 mm, steel finish/repainted. • Trim panels, mudguards, version aluminium checker plate, sandblasted, powder-coated and painted. RAL colour to be specified during order clarification. • 3 pcs. toolboxes, version aluminium checker plate, sandblasted, powder-coated and painted. Size and arrangement depend on wheelbase or available space. Mounting of underride protection at the rear and additional support, with installation of all hydraulic and electrical connections. Arrangement of sockets/pneumatics • 2x container locks in front of the front wall • Company FASSI is a renowned Italian crane manufacturer that has been developing, manufacturing and marketing loading cranes from 1.0 TM to 215 TM worldwide for more than 50 years. • New crane type FASSI F2150RAL 2.28RAL, endlessly rotating, fully assembled, installed, and parameterized, with 8 hydraulic extensions on the knuckle boom and Fly-JIB L816L with 6 extensions. • For detailed crane equipment, please refer to the enclosed documents. • Initial inspection and parameterization of the crane are carried out according to the technical regulations and load diagrams of FASSI loading cranes. Lighting: • 1 x LED AS, each 1x on

Condition: new, functionality: fully functional, fuel type: electric, color: other, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE FABO TURBOMIX FULL AUTOMATIC MOBILE CONCRETE BATCHING PLANTS are ideal solutions for the projects that require short term and a compacted settlement on a dedicated job site. Since all the equipment of a concrete plant is assembled on a single mobile chassis, the plant can be moved easily by only one truck. Productivity of TURBOMIX mobile concrete plants vary from 30 m3/h to 150 m3/h. FABO TURBOMIX series of mobile concrete batching plants have automatic control, static/dynamic Load Cell Weighing of aggregate materials and additives. Concrete plants have qualitative and strong concrete mixer, which provides high capacity homogeneous mixture. TECHNICAL SPECIFICATIONS: Model: TURBOMIX 60 Production capacity: 60 m3 Dimensions (length x width x height): 15500 x 3000 x 4500 mm Mixer type: 1m3 twinshaft Aggregate bunker: 4x10 m3 Transfer conveyor: 2500 kg Cement weighing: 500 kg Additives weighing: 30 kg Water weighing: 200 lt Total weight: 19650 kg Total motor power: 60 kW Cement silo is optional. Turbomix 60 consists of: • Aggregate Storage Hopper • Aggregate Weighing Hopper • Aggregate Transfer Conveyor • Pan Mixer • Mixer Chassis, Walking Platforms, Ladder • Water Weighing Hopper • Cement Weighing Hopper • Admixture Weighing Hopper • Air Compressor • Cement Screw Conveyor • Bolted Cement Silo • Top Filter, Safety Valve and Accessories • Control Cabinnet • PC and Automation System • Control and Power Panel Lhedpoywf D Nefx Akfjf FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: new, functionality: fully functional, fuel type: electric, color: other, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE MEET OUR NEW INNOVATION MINIMIX-30! In this period when many products are mobilized and cost items are underestimated due to the current era, we continue to offer solution-oriented projects to our customers' concerns. As FABO Company, to reduce investment costs of our clients and provide them with quality service, we offer our new innovative MiniMix-30 model with affordable prices, which can be shipped by only one container. This plant, which is constructed completely by new parts on a new platform, has an economic structure and can be used to produce concrete mixture according to international standards on projects which require fairly moderate amount of concrete. Advantages of Mobile Minimix Concrete Batching Plant; - Cost effective shipping to overseas with 1 x 40 ft OT Container along with all its equipment’s - Minimizing installation area of the plant - Transportable by towing on roads - Can be installed, re-installed and transported in a very short period of time. - Ready Concrete Mixture conveyed by feeding conveyor to concrete mixing truck - According to the amount of the used concrete can be used Big Bag or small Bolted Silo - By complete automatic system can be produced homogeneous concrete Minimix model plant consists of following parts: - 4 x 5m3 Aggregate Bunker - 1m3 Aggregate Weighing Hopper - 600 x 4250mm Aggregate transfer conveyor - 600 x 12000mm Ready mixture transfer conveyor - 0.5m3 Pan Mixer - 300 kg Cement Weighing Hopper - 200 lt Water Weighing Hopper - 20 kg Admixture Weighing Hopper - 300 lt Air compressor - Optionally, Big Bag Blasting or 30 Ton Bolted Silo - Electrical switchboard consisting of Siemens switchgear - PLC Automation System Production capacity: 30 m3 FOR FURTHER INFORMATION, PLEASE FEEL FREE TO CALL US!!! Lodoywf A Eopfx Akfehf

Condition: used, empty load weight: 8,421 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2021, next inspection (TÜV): 06/2026, loading space length: 13,403 mm, loading space width: 2,490 mm, loading space height: 2,650 mm, loading space volume: 88 m³, suspension: air, tire size: 385/65 R22,5, color: white, Year of construction: 2021, mileage: 3,02,641 km, Equipment: ABS, Unladen weight: 8,421 kg, permissible gross weight: 36,000 kg, load securing with certificate, cargo space (L W H): 13,403 mm x 2,490 mm x 2,650 mm. Tyre size: 385/65 R22.5, DIN EN 12642 (Code XL) certificate, cargo space volume: 88 m³, 1st axle: , 2nd axle: , 3rd axle: , air suspension, underrun protection, EBS electronic braking system, spare wheel holder (2x), bolted chassis, portal doors, double-deck for EURO pallets with crossbars, 1x15 and 2x7-pin connection sockets, antispray, telematics system. You can find our full range of vehicles at . Interested in financing? With our Value Added Service, we offer you tailored financing options, full service and telematics solutions. We are happy to advise you. Lhjdjy Eayhjpfx Akfof

Condition: used, empty load weight: 8,421 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2021, next inspection (TÜV): 06/2026, loading space length: 13,403 mm, loading space width: 2,490 mm, loading space height: 2,650 mm, loading space volume: 88 m³, suspension: air, tire size: 385/65 R22,5, color: white, Year of construction: 2021, mileage: 2,81,974 km, Equipment: ABS, Unladen weight: 8,421 kg, permissible gross weight: 36,000 kg, load securing with certificate, cargo space (L W H): 13,403 mm x 2,490 mm x 2,650 mm. Tyre size: 385/65 R22.5, DIN EN 12642 (Code XL) certificate, cargo space volume: 88 m³, 1st axle: , 2nd axle: , 3rd axle: , air suspension, underrun protection, EBS electronic braking system, spare wheel holder (2x), bolted chassis, portal doors, double-deck for EURO pallets with crossbars, 1x15 and 2x7-pin connection sockets, antispray, telematics system. You can find our full range of vehicles at . Interested in financing? With our Value Added Service, we offer you tailored financing options, full service and telematics solutions. We are happy to advise you. Ledpfxsy Eaybs Akfshf

Condition: used, empty load weight: 8,418 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 05/2021, next inspection (TÜV): 05/2026, loading space length: 13,403 mm, loading space width: 2,490 mm, loading space height: 2,650 mm, loading space volume: 88 m³, suspension: air, tire size: 385/65 R22,5, color: white, Year of construction: 2021, mileage: 2,35,009 km, Equipment: ABS, Unladen weight: 8,418 kg, permissible total weight: 36,000 kg, load securing with certificate, cargo area (L W H): 13,403 mm x 2,490 mm x 2,650 mm. Tire size: 385/65 R22.5, certificate DIN EN 12642 (Code XL), cargo area volume: 88 m³, 1st axle: , 2nd axle: , 3rd axle: , air suspension, underride protection, electronic braking system (EBS), spare wheel holder (2x), bolted chassis, swing doors, double-deck Euro pallet system with beams, 1x15-pin and 2x7-pin plug connectors, antispray, telematics system. You can find our complete vehicle range at . Interested in financing? With our Value Added Service, we offer you tailored financing solutions, full-service and telematics services. We are happy to advise you. Lhedpfxoyt Uk Ns Akfof

Condition: used, empty load weight: 8,418 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 04/2022, next inspection (TÜV): 02/2027, loading space length: 13,403 mm, loading space width: 2,490 mm, loading space height: 2,650 mm, loading space volume: 88 m³, suspension: air, tire size: 385/65 R22,5, color: white, Year of construction: 2022, Equipment: ABS, Unladen weight: 8,418 kg, permissible total weight: 36,000 kg, load securing with certificate, cargo area (L W H): 13,403 mm x 2,490 mm x 2,650 mm. Tire size: 385/65 R22.5, certificate DIN EN 12642 (Code XL), cargo area volume: 88 m³, 1st axle: , 2nd axle: , 3rd axle: , air suspension, underride protection, electronic braking system (EBS), spare wheel holder (2x), bolted chassis, swing doors, double-deck Euro pallet system with beams, 1x15-pin and 2x7-pin plug connectors, antispray, telematics system. You can find our complete vehicle range at . Interested in financing? With our Value Added Service, we offer you tailored financing solutions, full-service and telematics services. We are happy to advise you. Lhjdpfx Ajy Eax Rokfjf

Condition: good (used), Swivelling aggregate mount Engine mount Lhsdpfx Akjx Ni Szsfef UP-DOWN .....250 mm FORWARD-BACKWARD.... 150 mm Swivelling All components are bolted not welded