Used Tool Cabinet for sale (39,448)

Condition: ready for operation (used), functionality: fully functional, HURON NU-4 is equipped with several buttons, switches and levers to control its operations. x-travel: 1100 mm y-travel: 700 mm z-travel: 500 mm spindle/table distance: 9-509 mm spindle head - swivelling: 360°. spindle taper: SK 40 Meziv spindle speed range: 30 - 2066 rpm spindle speed steps: 27 feed rates: 1.6 - 820 mm/min feed steps: 27 Gedpfx Aporiulgj Dobu table surface: 1435 x 460 mm rapid traverse on X and Y axes: 2.8 m/min rapid traverse on Z axis: 1.4 m/min total power requirement: 10 PS(HP) weight of the machine approx.: 3.1 t dimensions of the machine approx.: 2.36 x 1.65 x 1.45 m (w x h x d)

Condition: new, Carbolite Gero AX30 Heating Cabinet *New price: €3385 The Apex AX series heating cabinets are economical laboratory devices for temperatures up to 250°C. * Digital PID controller R38 * Forced-air fan for short heating times and excellent temperature homogeneity * Stainless steel interior chamber * Two adjustable, chrome-plated shelves * Door with locking function and airtight silicone seal * Complies with safety standard BS EN 61010-2-010:2003 Gedpfx Apsq Hdfns Debu Maximum temperature: 250°C Minimum temperature: RT + 30°C Volume (liters): 28 Temperature homogeneity (°C): ±5.0 @ 250°C Heating time (min): 23 Recovery time (min): 3 Dimensions: Internal H x W x D (mm): 295 x 300 x 320 External dimensions H x W x D (mm): 440 x 590 x 465 Load per shelf/total: 10/20 (kg) Air changes per hour: 65 Max. power (W): 918 Holding power (W): 342 Weight (kg): 24 Item condition: new, without original packaging More Carbolite Gero AX heating cabinets can be found in our shop! International shipping costs available upon request!

Condition: good (used), Garant Oil Cabinet 145x72x75 cm Design: Sturdy steel sheet construction with reinforced hinged doors, lockable with a sliding handle and pin cylinder lock. The cabinet body is equipped with a single-drawer locking mechanism. This mechanism ensures that only one drawer can be opened at a time, thus largely preventing the cabinet from tipping over. Shelves and drawers can be accommodated in a 25 mm grid. Oil cabinet, equipped with plastic oil canisters. Godpfx Ask Shv Hjp Dobu Drawer/shelf load capacity: 200 kg Drawer extension (partial/full extension): 100% Drawer extension: Extension lock Height adjustment in a grid: 25 mm Pin cylinder lock: modular plug-in insert H x W x D = 145 x 72 x 75 cm Without key Item condition: used MSRP: €3240 You can find more control cabinets – new and used – in our shop! International shipping costs available upon request!

Condition: new, Areva Teleperm XS Control System Cabinet Standard Cabinet Design For the construction of Teleperm XS systems, control system cabinets of the type SC 9422 (2200 x 900 x 400 mm deep), protection class IP30, are typically used. The cabinet is equipped with cable routing systems with a shielding rail. The cabinet is designed for seismic loads. Cable entry and power supply are generally located at the bottom. In the standard cabinet, the module carriers are mounted in the central area. To the left and right of this are areas for mounting cabinet connection elements and transceivers. Connection terminals are used to connect peripheral cables. Other connection techniques, such as Maxi-Termi-Point, are also possible. Field cables must be shielded and consist of twisted pairs. Buses are implemented within a cabinet using conventional cables, and outside the cabinet using optical fibers. Teleperm XS is suitable for systems with area grounding as well as for systems with central grounding (ZEP). Godetzaxmepfx Ap Debu Module Carriers Depending on the application, various configurations of module carriers are used. In the basic design, the module carrier has a continuous backplane bus and offers 21 slots. If large quantities of signals need to be processed, expansion module carriers can be connected. The following variants are also supported: - Divided module carriers with two smaller, independent computers (each with 10 slots, each with its own fan and power supply) - Mixed configurations, such as a compact combination of a computer with the associated signal processing modules Control System Cabinet SC 9422 with cross bracing Double doors Cabinet indicator light Height x Width x Depth: 2200 x 900 x 400 mm Protection class: IP30 Power consumption: typically 550 W, max. 1280 W Weight: 300 kg You can find more items in other sizes - new and used - in our shop! International shipping costs available upon request!

Condition: good (used), Separating tool, punching tool, punch, punch die, punch stamp, die holder -Punch tool: Intermediate block -Bore: Ø 73 mm / Mounting Ø 90 mm / Hole spacing 90/75 mm M10 -Dimensions: see photos -Dimensions: 200/100/H120 mm Gedpfjzm Samsx Ap Debu -Weight: 6.8 kg

Condition: good (used), Separating tool, punching tool, punch, punch die, punch stamp, die holder -Stamping tool: die holder -Hole: Ø 35 mm -Dimensions: see photos -Dimensions: 235/105/H130 mm Gbedezm Satepfx Ap Dou -Weight: 11.1 kg

Condition: good (used), Triangular notching tool, notching side knife, die holder, separating tool, punching tool, punch, punch die, punching die Gsdpfozm Tkgex Ap Debu -Punch tool: Angle notching tool, notching unit -Dimensions: see photos -Dimensions: 150/130/H80 mm -Weight: 4.4 kg

Condition: good (used), Profile steel knife, shearing tool, cutting tool, separating tool, punching tool, punch, punch die, punching die, knife plate -Manufacturer: Mubea, cutting plate shearing tool for square steel / round steel -Item No.: Square steel: 27x27 mm / 50x50 mm -Round steel: Ø 31/56 mm -Number: 2x shearing tools available -Price: per piece Gbodoznadvopfx Ap Deu -Dimensions: 185/185/H40 mm -Weight: 8.8 kg/pc.

Condition: good (used), Separating tool, punching tool, punch, punch die, punch stamp, wiper, wiper plate -Scrapers: Scraper plate for punching tool, 4 pieces -Size: 10/15/30/40 mm -Dimensions: see photos -Submission/Price: complete -Transport dimensions: 150/110/H60 mm Gjdsznafyspfx Ap Dobu -Weight: 6.1 kg

Condition: good (used), Extrusion tool accessories, extruder -Manufacturer: JC Times USEON, Extrusion Tooling Accessories -Type: unfortunately without type designations -Perforated plates: 3 pieces 1940/210/H60 mm -Individual components: see photos Gedpozpwcxefx Ap Dobu -Price/Fee: complete -Transport dimensions: 3150/1095/H1790 mm / 2050/300/H900 mm -Weight: 2510 kg / 560 kg

Condition: good (used), Drawer cabinet, Format, 9 drawers – used: Price ex works: €500.00 (net)! Item 1: Manufacturer: Format Type: unknown Year of manufacture: unknown Gbjdpfjzp Rq Asx Ap Dou Dimensions: approx. 80x70x100cm 9 drawers According to the manufacturer, 80 kg load capacity per drawer 88% extendable New price approx. €1,700.00 Condition: good Available: immediately Location: Leipzig

Condition: good (used), Drawer cabinet, Format, 8 drawers – used: Godpfx Aszp Ru Uop Djbu Price ex works: €400.00 (net)! Item No. 2: Manufacturer: Format Type: unknown Year of manufacture: unknown Dimensions: approx. 80x70x100cm 8 drawers Condition: good Available: immediately Location: Leipzig

Condition: good (used), Drawer cabinet, Schäfer Shop, 8 drawers – used: Price ex works: €400 (net)! Item 3: Manufacturer: Schäfer Shop Type: unknown Godpfozp Rv Eox Ap Dsbu Year of manufacture: unknown Dimensions: approx. 100x70x100cm 8 drawers of different heights Condition: good Available: immediately Location: Leipzig

Condition: good (used), Approx. 15 units of 5-section wardrobe with bench, C+P – used: Price per unit: €500 (net), disassembled, packed, and loaded at the location! Manufacturer: C+P Möbelsysteme Type: S 3000 Evolo Year of manufacture: unknown Dimensions: H 1850 x W 1480 x D 500/815 mm Gbjdpfozqzplsx Ap Dju with 150 mm high feet and pre-assembled bench, bench slats made of beech, with integrated height adjustment, 5 compartments, compartment width 300 mm, 5 shortened doors, suspension on pivot bolts, safety swivel lock for padlock with lock protection. Condition: good Available: immediately Location: Leipzig

Condition: used, Tool sharpening machine with coolant pump. Once the correct grinding angle has been set, the tool is ground using a manual/linear feed. Gjdpfx Aozrx Ihop Dsbu Technical data: - Tool shank: 35 mm - Clamping length: 65 mm

Condition: good (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 875 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 7,000 rpm, overall weight: 4,500 kg, CNC control Heidenhain TNC 426 electronical hand wheel manual swivel head quill coolant device measuring feeler Technische Daten: /technical details X Weg / x travel 875 mm Y Weg / y travel 500 mm Z Weg / z travel 500 mm Drehzahlbereich 2-stufig / spindle speed range (2-steps) 20 - 7000 UpM / rpm Eilgang / rapid feed 15 m/min. Gsdpfx Aezr D Akop Dobu Spindelaufnahme / spindle taper SK 40 Tischaufspannfläche / table clamping area 900x528 mm Gewicht der Maschine ca. / weight 4500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: good (used), Die holder, notching tool, punching tool, punch, punch die, punch stamp, punch die Gbodpozr Ek Njfx Ap Dju -Die: Punch and die Ø 46 mm / 1 13/16" -Transport dimensions: Ø 90 x 80 mm -Weight: 2.2 kg

Condition: good (used), Die holder, notching tool, punching tool, punch, punch die, punch stamp, punch die, slot die, punch and die set slot die Gedpfx Apozr Epro Dobu -Die cutting set: punch and die set, slotted die -Size: 13.0x40.0 mm -Matrix: 13.7x40.7 mm -Quantity: 2x punching tools available -Price: per piece -Transport dimensions: Ø 90 x 80 mm -Weight: 2.1 kg

Condition: good (used), Separating tool, punching tool, punch, punch die, punch stamp, die holder Gedpfx Apjzr Hbcs Dsbu -Punch tool: Intermediate block -Bore: Ø 100 mm / Ø 25 mm -Dimensions: see photos -Dimensions: 205/180/H90 mm -Weight: 8.2 kg

Condition: good (used), Separating tool, punching tool, punch, punch die, punch stamp, die holder -Punch tool: Notching tool -Type: unfortunately without a type designation -Dimensions: see photos -Dimensions: 200/120/H150 mm Gbedpfx Aozr Hcaep Deu -Weight: 13 kg

Condition: excellent (used), max. grinding diameter 175 mm Gsdpfxszxh Tms Ap Djbu

Condition: ready for operation (used), Year of construction: 1998, Table size: 400 x 800 mm Travel ranges x/y/z: 600/400/380 mm Quill stroke: 80 mm Spindle mount: SK 40 Gbjdpfx Apezvm H He Dsu Vertical milling head, adjustable in 2 planes Spindle speeds, stepless: 63 - 3150 rpm Feeds, longitudinal/vertical, stepless: 4 - 1200 mm/min Electrical connection: 400 V, 4 kW Space requirement: 1800 x 1700 x 1900 mm Weight, approx.: 1.65 t

Condition: used, Year of construction: 2011, turning diameter over cross slide: 75 mm, turning diameter: 381 mm, spindle speed (max.): 3,500 rpm, spindle bore: 75 mm, travel distance Z-axis: 850 mm, total height: 2,325 mm, total length: 4,820 mm, total width: 2,100 mm, overall weight: 8,000 kg, CNC Lathe with Y-axis, driven tools and 2nd Spindle Gbjdpfszv Smfox Ap Dou CNC Control Fanuc series 18i-TB Turning diameter 381 mm Spindle bore diameter 75 mm Spindle speed 3500 R/min Spindle motor 22/15 Kw Movement X-axis 190 + 69,5 mm Movement Y-axis +55 / -55 mm Movement Z-axis 850 mm Movement W-axis (subspindle to mainspindle) 830 mm Min indexing C-axis main spindle 0,001 ° Number of tools on turret 12x Number of driven tools 12 x Tool Taper VDI 40 Bar feeder Irco-Breuning ILS MUK Spindle motor driven tools 4000 R/min If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: good (used), Year of construction: 2000, measuring range X-axis 330 mm measuring range Z-axis 400 mm dimensions 880 x 520 x 990 m Tool spindle: SK 50 Indexable (4× 90°), pneumatic Measuring system: Heidenhain LS series, optoelectronic Profile projector/optics: 0× magnification, cutting edge control using crosshairs Weight: approx. 250 kg Gedpezupmmefx Ap Dobu

Condition: good (used), Triangular notching tool, notching side knife, die holder, separating tool, punching tool, punch, punching die, corner notching punch, punching punch, square notching punch, notching punch, notching tool -Punching tool: for profile steel shears, flat steel shears, 2 pieces -Hole spacing: 135 x Ø17 mm -Dimensions: see photos -Submission/Price: complete -Dimensions each: 175/107/H125 mm -Weight: 6.1 kg/pc. Gbsdezr Hlnspfx Ap Dju