Used Tos Fn 40 for sale (22,845)

Condition: used, Weiss   Type: WT3-600/40   Weiss temperature test chamber with S!MCON / 32 control, air-cooled   (Refrigerant converted to R-452A)   Control panel: "Touchpanel" All control and operating commands can be initiated on the "Touchpanel" control panel by simply touching the function symbols.   Adjustable feet To compensate for uneven floors and to ensure adequate ventilation of the machine, the test chamber is equipped with adjustable feet.   Feedthroughs The test chamber is equipped with feedthroughs on the right and left sides. These allow measuring cables and testing equipment to be placed inside the test chamber.   Feedthrough installed as standard R1: 125 mm nominal diameter L1: 50 mm nominal diameter   Test chamber volume: approx. 600 liters   External dimensions with hinges and door latch Height 1995 mm, Width 1090 mm, Depth 1660 mm External dimensions without hinges and door latch Height 1995 mm, Width 1000 mm, Depth 1660 mm   Internal dimensions: Height 950 mm, Width 800 mm, Depth 800 mm   Data for temperature tests:   Temperature range: -42 to +180 °C Temperature deviation over time in the center of the usable space: ± 0.1 to ± 0.5 K Temperature deviation spatially: ± 0.5 to ± 1.5 K   Temperature change rate (according to IEC 60068-3-5) Heating: 4.0 K/min Cooling: 3.0 K/min Maximum heat compensation: 2500 W   Data for operation:   Test chamber lighting: Halogen bulb 2 x 24V, 50W Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated current: 15 A, Rated power 7.8 kW Fuse on customer side: 16 A, slow-blow   Sound pressure level approx. Measured at a distance of 1 m from the front, 1 m height: 61 dB(A)   Refrigerant: R-452A   Itedpfxszga Huj Anisn Weight: 620 kg   For your safety as a buyer, here is the following information!   The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful testing, the chambers are subjected to a documented test run.   Condition: used   Scope of delivery: (See picture)   (Changes and errors in the technical data and information are subject to change!)   We are happy to answer any further questions you may have by telephone.

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 269588 € 3 kW Wechseltisch 16 mm 8 mm 8 mm 5 mm 8 mm 29,9 (mit Absaugung) kW 6100 x 2070 mm 6100 mm 2070 mm 125 mm 6096 x 2032 mm 240 (für 3 - 12kW) / 400 kg/m² 5800 (für 3 - 12kW) / 960 kg 100 m/min 100 m/min 141 m/min 14 m/s² +/- 0,05 mm +/- 0,05 mm 42 s The HD-FN has two tables which are automatically switched alternately to enable simultaneous cutting and loading/unloading. The shuttle table is positioned longitudinally, which results in the best possible accessibility for optional loading and unloading systems. Control, laser source and cooling are integrated into the machine. The cutting head has automatic focus adjustment. Itedpjx U Elnefx Anion The system consists of the following components: Shuttle table (positioned longitudinally for best possible accessibility for optional loading and unloading systems) Encapsulated cutting room with protective glazing CNC graphic control with touchscreen Laser source Brilase Premium Cutting head with automatic focus adjustment Integrated cooling unit for cutting head and laser source CAD/CAM software Lantek for programming including autonesting Positioning laser Sheet check system (automatic detection of sheet position and dimensions) Automatic nozzle cleaning Central lubrication Slug box Working area lighting Multi-chamber suction system Light barrier protection for the changing table Remote maintenance access Air condition for electrical cabinet Equipped according to CE guidelines ALTERNATIVE LASER SOURCES: Material 4 kW 6 kW 12 kW 15 kW 20 kW Mild steelS235 20 25 30 35 40 Stainless steel(304) 10 15 25 35 40 Aluminium (5083) 12 20 30 35 40 Copper 6 10 15 15 15 Brass(CuZn39 Pb3) 10 12 20 20 20 OPTIONS: Suction unit with filter Automatic nozzle change

Condition: new, neu ca. 8 Wochen ab Auftragse Türkei 12900 € 247.68 € 40 to 285 mm 200x24 mm 660x1250 mm 250 mm 80 mm 10 mm/s 10 mm/s 4 kW 930 mm 1250 mm 650 mm 1250 mm 1100 kg Stroke adjustment with digital display Manual and automatic operation mode Tool holder pins and tools hardened and ground Isdpfx Aowiq N Isnistn Bending tool Foot pedal OPTIONS: Cutting-, punching- or pipe bending tools on request

Condition: used, filling valves: 40 capacity / hour ca.: 10000 capping heads: 8 Itsdoz S Ra Ujpfx Anisn working direction: right-left (CCW)

Condition: used, total length: 2,450 mm, total width: 1,900 mm, total height: 2,140 mm, Year of manufacture: 2020 Colour: Grey Weight: 5.500 kg - Year: 2020 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Drive system: CNC - Control system brand: Delem - Control system type: DA-41s - Power [kW]: 4.0 - Number of axes [pcs]: 4: Y1+Y2+X+R - Press force [ton]: 40 - Max. working width [mm]: 2000 - Column gap [mm]: 1800 - Throat depth [mm]: 200 - Backgauge depth [mm]: 750 - Max. stroke [mm]: 100 - Crowning system: None - Punch holder: Quick-release - Tool holder type: European-style - Tools included: Yes - Options: Finger safety guard - Transport dimensions: 2450mm x 1900mm x 2140mm (l x w x h) - Transport weight [kg]: 5500kg - Transport packages [pcs.]: 2 Iodpfx Ajzr Inwenijtn Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, mast type: telescopic, fuel type: diesel, Year of manufacture: 2014 Lifting capacity: 227 kg Please contact Gebrauchtgeräte Center for more information Itedpfxozf Auxe Anijn

Condition: used, fuel type: electric, Year of manufacture: 2017 Isdpezfkbysfx Anistn Lifting capacity: 150 kg Please contact Gebrauchtgeräte Center for more information

Condition: used, This used META shelving unit is a compact and flexible storage solution for workshops, warehouses, archives, and businesses. With a height of 250 cm, a depth of 40 cm, and a total of 6 storage levels, the shelving unit offers sufficient space for the organized storage of boxes, containers, spare parts, and other storage items. The modular shelving system can be used in a variety of ways and enables efficient use of the available storage space. 8.06 linear meters of shelving units, 40 cm deep, used, workshop shelving, warehouse shelving, hand storage, plug-in shelving, small parts storage. Data: - Height: approx. 250 cm - Depth: approx. 40 cm - Length: approx. 8.06 linear meters Shelving offer of 8.06 linear meters, consisting of: - 09 x uprights approx. 200 x 40 cm, pre-assembled - 48 x shelves approx. 100 x 40 cm. - 192 x shelf supports. - 08 x cross braces - Manufacturer: META CLIP. - Load capacity: 100 kg per shelf, with evenly distributed load. - Levels: 6 x storage levels. - Surface: Sendzimir galvanized. - Used, available from stock -- IMMEDIATELY AVAILABLE IN MULTIPLE UNITS -- Ijdpfx Ajz T Idmsnistn Price: €643.00 net plus applicable VAT You will receive an invoice with VAT shown. Transport: Delivery can be arranged by our partner shipping company, if desired; the costs depend on the postal code. Assembly: Our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment, if required. Our recommendation: Let us know your requirements... We will be happy to help you realize your projects, from planning and ordering to assembly. Are you interested or do you have any questions? Simply contact us via message or phone. You can find our telephone number on our company page. ☎️ You can reach us by telephone from Monday to Friday, 08:00 - 15:00. Alternatively, you can send us a message with your name and number, and we will get back to you as soon as possible.

Condition: new, Heidenhain LS 106C length measuring scale, ML 440 mm, art. no. 336961-40, serial no. 155103690F, unused, in original packaging, 100% functional. Scope of delivery as shown in the photos. Itodpfx Ansi Eap Heisn

Condition: used, machine/vehicle number: 005521, X axis working area: 4000 mm Itodpsvctlgefx Anijn Y axis working area: 1400 mm Working Table: Pod and Rail Main Electrospindle power: 15 KW Number of controlled axes: 4 axes Total number of drilling spindles: 30 Total number of tool changer positions: 24

Condition: new, Alzmetall Alzstar 40/S pillar drilling machine Manufacturer: Alzmetall Type: Alzstar 40/S Condition: new Drilling capacity steel E335 (St 60) 40 mm Short spindle MK 3 Spindle stroke 120 mm Thrust 293 mm Itjdpfsy S Ar Tsx Anion Column diameter 115 mm Machine table, usable support 514 x 360 mm T-slots, number x width x distance 2 x 14 x 224 mm Distance spindle-table min./max. 117/701 mm Feed manual Machine height without options approx. 1840 mm Net weight approx. 270 kg Spindle speed rpm 160-2250

Condition: excellent (used), Year of construction: 2011, operating hours: 29,000 h, functionality: fully functional, Weiler E40 Precision Lathe Manufacturer: Weiler Type: E40 Year of Manufacture: 2011 Condition: Used, operational, ready for demonstration Operating Hours: 29,000 h Scope of Supply: - Documentation Isdpfx Anjztypvjietn - Machine feet - Coolant system - Machine lamp - Full chuck jaws - Half chuck jaws - 3-jaw chuck - 4-jaw chuck - 4-position automatic tool changer incl. 4 tool holders - MultiFix tool changer

Condition: good (used), Year of construction: 1995, For sale is a good used guillotine shear from LVD. This machine was produced in Germany in 1995. guillotine shear LVD HST - C 40/6 Manufacturer: LVD Type: HST - C 40/6 Cutting capacity in steel 6,35 mm Maximum length 4050 mm Cutting angle 0.5 to 2 ° Cadence 10 to 45 strokes / min Itsdezty E Dspfx Anien 7.5 kW motor Weight 9500 kg

Condition: used, This used META shelving unit is a compact and flexible storage solution for workshops, warehouses, archives, and businesses. With a height of 250 cm, a depth of 40 cm, and a total of 6 storage levels, the shelving unit offers ample space for the organized storage of boxes, containers, spare parts, and other storage items. The modular shelving system can be used in a variety of ways and enables efficient use of the available storage space. Itodpfx Ajz T Dx Tonisn 3.06 linear meters of shelving units, 40 cm deep, used, workshop shelving, warehouse shelving, hand storage, plug-in shelving, small parts storage. Data: - Height: approx. 250 cm - Depth: approx. 40 cm - Length: approx. 3.06 linear meters Shelving unit offer 1.06 linear meters, consisting of: - 04 x uprights approx. 200 x 40 cm, pre-assembled - 18 x shelves approx. 100 x 40 cm - 72 x shelf supports - 03 x cross braces - Manufacturer: META CLIP - Load capacity: 100 kg per shelf, with evenly distributed load - Levels: 6 x storage levels - Surface: Sendzimir galvanized - Used, available from stock -- IMMEDIATELY AVAILABLE IN MULTIPLE UNITS -- Price: €253.00 net plus legally applicable VAT You will receive an invoice with VAT shown. Transport: Delivery can be arranged by our partner shipping company upon request; the costs depend on the postal code. Assembly: Our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment if required. Our recommendation: Let us know your requirements... We will be happy to help you with the implementation of your projects, from planning to ordering and assembly. Are you interested or do you have any questions? Simply contact us by message or phone. You can find our telephone number on our company page. ☎️ You can reach us by phone from Monday to Friday, 08:00 - 15:00. Alternatively, you can send us a message with your name and phone number, and we will get back to you as soon as possible.

Condition: excellent (used), CATALOGUE NUMBER 8064 TECHNICAL DATA - max. diameter of the main saw blade with scoring blade: 350mm - max. cutting height: 130mm - main blade adjustable up/down + angle, manually - spindle diameter: 30mm - with crosscut fence - cutting length on the fence: 3200mm - cutting width adjustable electrically with guide: 1320mm - with side table - with scoring blade - max. diameter of the scoring blade: 120mm - spindle diameter: 20mm - main motor: 7.5kW - 3 types of spindle speeds: 3000/4000/5000 rpm - diameter of the dust extraction port: 120mm - dimensions of the table with extension and widening: 1870x1440mm - blade guard - dimensions (L/W/H): 4100x3400x1500mm - weight: 860kg ADVANTAGES – Made in Italy – Cutting width adjustable electrically – With scoring blade – Unpainted – DTR documentation, CE certified – Used saw, very good condition Net price: 26900 PLN Net price: 6256 EUR, depending on the exchange rate of 4.30 EUR (Prices may change due to significant fluctuations) Itedpjzrwbtefx Anijn

Condition: like new (used), Year of construction: 2019, functionality: fully functional, load capacity: 4,000 kg, Equipment: documentation/manual, Sideros Syncrolift Column Lifting and Rotating Device, 4000 kg load capacity, like new condition. Minimum height: 450 mm Maximum height: 1950 mm Travel: 1500 mm Diameter of clamping disc: 800 mm Overall height: 2505 mm Total weight: 1300 kg Torque: 5500 N/m Iodpfxsyrz Hno Aniotn Speed: 0.75 RPM.

Condition: reconditioned (used),

Condition: used, machine/vehicle number: 007350, X axis working area: 4000 mm Y axis working area: 1400 mm Working Table: Pod and Rail Main Electrospindle power: 15 KW Number of controlled axes: 4 axes Total number of drilling spindles: 30 Itedo Aayalspfx Anisn Total number of tool changer positions: 28

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 05/2007, total length: 12,080 mm, total width: 2,500 mm, wheelbase: 9,600 mm, color: silver, Equipment: ABS, General information Year of construction: 2007 Registration number: OK-65-YT Axle configuration Make axles: BPW Rear axle 1: Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Weights Empty weight: 5.360 kg Carrying capacity: 33.640 kg GVW: 39.000 kg Condition Technical condition: good Visual appearance: good Ijdpfx Ao Aa A Ncsnistn Additional information Please contact Arie or Pedro for more information = Additional options and accessories = - Air suspension - Disc brakes - Extandable - Twist-locks = Remarks = Fliegl SDS 390 / 40-45FT / 1x Extendable / BPW + Disc

Condition: good (used), Year of construction: 1983, FGSH 50 TOS KURIM milling machine. Year of manufacture 1983 (CZE). Double-torsion head (new bearings, new gears). Beam to the level with the eyepiece. Itedpfsdqp Euox Anisn Parameters: Table 630 x 1800 mm. Travels: X - 1430 mm, Y - 670 mm, Z - 500 mm. ISO 50. Speed ​​range 45-1400 rpm. Main engine power 15 kW. The demand for a power of 23 kW. Dimensions: Length X Width X Height: 3200 X 3475 X 2620 mm. Weight 6500 kg.

Year of construction: 1983, condition: good (used), FGSV 32 TOS KURIM milling machine. Year of manufacture 1983 (CZE). Parameters: Table 320 x 1400 mm. Travels: X - 1000 mm, Y - 400 mm, Z - 450 mm. ISO 50. Speed ​​range 35-1800 rpm. Distance between spindle and table 140 - 590 mm. Isdpfx Ajh Ir Rmeniotn Distance between spindle and column 120 - 520 mm. Max. table load 500 kg. Main engine power 11 kW. The demand for a power of 15 kW. Dimensions: Length X Width X Height: 2735 X 2425 X 2475 mm. Weight 4200 kg.

Condition: good (used), Geared motor, electric motor, electric geared motor, geared motor with frequency converter -Handover in its current condition as inspected -Gearbox base: Damage, see photos -Manufacturer: Nord, Type SK20-80L/4 SK80L/4 TFBRE10TIO/2-D -Speed: 40 rpm i= 34.09 -Power: 0.75 kW / 1375 rpm -Engine: Nord type SK80L/4 TFBRE10TIO/2-D -Transmission: Nord type SK20-80L/4 -Frequency converter: Nord type SK 300E-151-340-B -Design: B3 Itedsilq Hiepfx Anijn -Shaft: Ø 25 x 60 mm -Brake: 10 Nm -Protection class: IP 55 -Dimensions: 480/185/H305 mm -Weight: 28 kg

Condition: used, mileage: 5,00,819 km, power: 290 kW (394.29 HP), first registration: 08/2014, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: red, gearing type: automatic, emission class: euro6, loading space volume: 47 m³, loading space length: 8,200 mm, loading space width: 2,450 mm, loading space height: 2,350 mm, Equipment: ABS, air conditioning, tail-lift, * Sun visor * Driver airbag * ABS * ASR * ESP * Active Brake Assist * Lane departure warning system * Radio * On-board computer * Rear view camera * Reversing alarm * Cruise control * Hill start assist * Electric windows * Electric mirrors adjustable * Heated mirrors * Central locking * Roof hatch * Driver's comfort seat Ijdpfxjum H N As Aniotn * Heated seats * Seat ventilation * Differential lock rear axle * Steering axle * Air intake at top * Tandem trailer coupling * Duomatic air connection * Fog lights * 12-speed * Suspension: air * Payload: 14340 * Permanent brake: engine brake ----Special structure: Tail lift: Bär BC 2000 S4, load capacity: 2,000 kg, shield height: 2,300 mm, aluminum, foot control.----Structure: Spier beverage structure type 7GK040, sliding tarpaulin left + right, hardwood floor, 4 perforated strips, beam system for securing loads, loading area lighting. Loading height approx. 1,200 mm Only sold to traders. FOR EXPORT ONLY THE NET PRICE HAS TO BE PAYED !!!!! ALL INFORMATION IS PROVIDED WITHOUT GUARANTEE. EQUIPMENT AND ACCESSORIES. The basis of all purchase contracts, invoices, pro forma invoices, orders and sales discussions are our general terms and conditions (see legal notice).

Condition: used, mileage: 82,000 km, power: 295 kW (401.09 HP), first registration: 09/2017, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: black, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, compressor, navigation system, parking heater, MB ANTOS 2640 S AKX Horsetruck 6 horses Pop-Out 6 horses, side and rear ramp, pop-out, cellar under apartment, storage compartments around the truck, 550 liters fresh water, 300 liters waste water, 5 berths, living room, large bed above bathroom, groom's bed, rear entrance door, Video surveillance and temperature monitoring for horse compartment, LG stationary air conditioning, stationary heating, Tv/Sat, fine wood, bathroom, shower, WC, air conditioning, kitchen, seating area, microwave, refrigerator, external tack room, cable winch, cruise control, alloy wheels, navigation system, air suspension, steerable rear axle, trailer coupling, and much more. Errors/entry errors & prior sale reserved. Itsdpfx Ansufu Uijisn * NET SALE POSSIBLE. * Top leasing offers Location and viewing of our vehicles: STX HORSETRUCKS GERMANY Hamburgerstrasse 65 23816 Leezen Sales and service of all makes in the field of horse transporters and trailers. Please make an appointment in advance. under Richard Theurer Andreas Theurer

Condition: good (used), machine/vehicle number: 2212 0030, turning height: 1,150 mm, workpiece weight (max.): 4,000 kg, power: 0.037 kW (0.05 HP), TOS Vertical Lathe model SK 12 A, 37Kw Skoda main motor, plate diameter 1250mm, maximum diameter to be turned on the right carriage 1540mm, working height 1100mm, maximum weight of the part to be turned 4000kg, 1 carriage with 3-position turret, 1 vertical carriage with 45º inclination, includes the display of the degree inclination, weight of the lathe 20 tns, Itedpjqnwqzsfx Anien