Used Tour Amc 360 for sale (4,984)

Condition: ready for operation (used), Year of construction: 1980, functionality: fully functional, type of input current: three-phase, total width: 1,050 mm, total length: 3,800 mm, total height: 1,750 mm, input current: 5 A, Schou L-2500 Heavy duty universal line boring machine Manufacturer: Schou & Co. Ltd., Copenhagen, Denmark Production era: Late 1970s – mid-1980s (Heavy Duty series) Design: Precision bore machining equipment for line boring engine blocks and gear casings Maximum boring length: 2500 mm Boring diameter range: 25 mm – 200 mm (depending on accessories) Table length: 2500 mm Spindle speed: Infinitely variable or multi-stage adjustable hydraulic/mechanical drive Feed: Automatic, fine-adjustable longitudinal feed for micron-level surface finish Frame structure: Vibration-free, special cast-iron bed with integrated support bridges Machine weight: approx. 1800 – 2200 kg (depending on equipment) 2. Accessories and equipment • Complete boring bar set (in various diameters and lengths) • Precision clamping blocks and support units for block alignment Guedpfx Agez Rw T Eo Soh • Centering bridges and dial indicator measuring devices • Tool setting micrometer • Integrated control panel with emergency stop • Boring grinder / milling auxiliary unit (depending on model)

Condition: good (used), Year of construction: 2011, operating hours: 46,500 h, functionality: fully functional, travel distance X-axis: 3,600 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 900 mm, feed length X-axis: 3,600 mm, feed length Y-axis: 1,100 mm, feed length Z-axis: 900 mm, nominal power (apparent): 130 kVA, controller manufacturer: Siemens, controller model: 840SE, workpiece length (max.): 3,600 mm, workpiece width (max.): 1,100 mm, workpiece diameter (max.): 1,100 mm, workpiece weight (max.): 5,000 kg, total height: 3,042 mm, total length: 9,280 mm, total width: 4,608 mm, table width: 1,100 mm, table length: 4,200 mm, table load: 5,000 kg, rotary table diameter: 1,050 mm, rotational speed (max.): 50 rpm, overall weight: 32,050 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 18,000 rpm, operating hours of spindle: 21,500 h, coolant supply: 40 bar, spindle nose: HSK 63, number of slots in tool magazine: 120, mount diameter: 1,050 mm, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, DMF 360 linear, manufactured in 2011, with Siemens 840D Solutionline control 120-position tool changer HSK 63 tool interface Spindle speed 18,000 rpm Chip conveyor Coolant system, 1000 liters, 80/40 bar Work area enclosure 3D probe, Heidenhain Blum laser Handwheel Air blow through the spindle Coolant nozzle Automatic doors A-axis, Lehman EA 420 Hydraulic clamping system for rotary table Robot interface Oil and emulsion mist separator Gusdoz Riy Rjpfx Ag Soh

Condition: excellent (used), Year of construction: 2017, machine/vehicle number: AB / 231059, functionality: fully functional, power: 4 kW (5.44 HP), input voltage: 400 V, input current: 23 A, input frequency: 50 Hz, type of input current: AC, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, height adjustment type: mechanical, feed rate X-axis: 11 m/min, actuation type: electric, total height: 1,600 mm, total length: 3,600 mm, total width: 900 mm, overall weight: 700 kg, Equipment: documentation/manual, One sided edgebanding machine SCM Olimpic K360. Second owner, both were small worshops, so limited usage and well preserved. Regularly maintained by authorised service. Main parameters: panel thickness 8 - 60mm, edge thickness 0.4 - 3mm (up to 10mm for solid wood) Main features: - pre-milling station - gluing station - feed magazine - pressure section - end-trimming unit - top and bottom trimming unit - corner rounding unit Guedez I U S Sopfx Ag Soh - scrapping and buffing units - controller with LCD panel - extra glue container

Condition: used, Polish Lathe / Polishing Machine Gujdez I Dh Aspfx Ag Soh Between points: 1500 mm Centre height: 180 mm Maxi diameter to polish: Ø 380 mm Spindle CM3 Spindle speed driven by speed variator Pneumatic tailstock Equipped with a vaccum system (only air hose to plug in) Machine was used to polish axes Voltage: 220 V mono Dimensions (L x W x H): 3200 x 1000 x 1900 mm Weight: 1,2 T

Condition: excellent (used), CATALOGUE NUMBER: 7480 Technical data: - track width: 360mm - roller width: 350mm - max. disc diameter: 350mm - disc bore diameter: 80mm - max. cutting height: 120mm - table dimensions: 2040x1220mm From above: - pawls - toothed feed roller - pawls - saw mandrel - sliding, pressure roller From below: - rollers in front of the table, 2 pcs - guide - pawls - track - central track lubrication - electric saw mandrel lifting - electric body lifting - stepless feed speed adjustment - extraction nozzle diameter: 140mm, 160mm - main motor: 30kW - overall dimensions (L/W/H): 2600x2300x1850mm - weight: approximately 4000kg ADVANTAGES - Czech production - used multi-blade saw - very good condition Gedpezulzmofx Ag Ssuh Net price: 30900 PLN Net price: 7186 EUR, depending on an exchange rate of 4.30 EUR (Prices are subject to change due to significant fluctuations)

Condition: used, 3-points Steady Ø 350 mm for SCULFORT Lathe Centre height: 550 mm Maxi diameter: Ø 350 mm Distance between fixing V: 350 mm Width: 1200 mm Guodpfx Aez I A D Nsg Sjh Thickness: 300 mm Total height: 1300 mm Weight: approx 250 kg

Condition: ready for operation (used), Year of construction: 2007, operating hours: 71,852 h, functionality: fully functional, machine/vehicle number: 15145361464, table length: 4,000 mm, overall weight: 32,000 kg, spindle speed (min.): 18,000 rpm, operating hours of spindle: 39,785 h, number of spindles: 1, number of slots in tool magazine: 30, Equipment: documentation/manual, DECKEL MAHO DMF 360 Linear – CNC Machining Center Gusdpfx Aez I D E Ujg Sjh Year of manufacture: 2007 Control: Siemens CNC control Machine type: 3-axis CNC vertical machining center The DECKEL MAHO DMF 360 Linear is a high-quality CNC machining center designed for precision milling and machining of complex components. The machine features a rigid and stable construction, linear drive technology and Siemens CNC control, providing high accuracy, excellent surface quality and reliable operation. The DMF 360 Linear offers a large working area and is suitable for a wide range of machining applications, including milling, drilling, tapping and contour machining. Main features: Manufacturer: DECKEL MAHO Model: DMF 360 Linear Year: 2007 CNC control: Siemens 3-axis machining Linear drive technology Vertical machining center Suitable for precision milling, drilling and tapping Rigid construction and high machining accuracy Suitable for single-part production as well as series production The machine is a reliable and versatile solution for metalworking companies looking for a high-quality CNC machining center with Siemens control.

Condition: like new (used), functionality: fully functional, Year of construction: 2014, operating hours: 300 h, Equipment: ABS, The printer is in almost new condition and has been used very little. Gujdpfx Agjz Ep Dkj Ssh

Condition: refurbished (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: S36-0330, laser power: 80 W, Trotec Speedy 360 – CO₂ laser with a brand-new laser tube, fully serviced Invest instead of repairing – this Trotec Speedy 360 is ready for immediate use and impresses with its exceptionally well-maintained condition and a newly installed laser tube. For sale is a Trotec Speedy 360 CO₂ laser engraving and cutting system, which has only been used in a professional setting and has always been carefully maintained. The machine is in very good condition, both technically and visually, and is immediately available for productive use. A new laser tube was installed before the sale. This means you not only get a proven industrial laser but also benefit from one of the most valuable wear parts in new condition. This significantly reduces the investment risk and enables a direct start to production without additional follow-up costs. Proven Trotec quality The Speedy 360 has been one of the most powerful and reliable CO₂ laser systems in its class for years. Its high processing speed, precise positioning, and excellent repeatability make it the first choice for professional users in industry, crafts, and advertising technology. Whether for individual production or series production – the Speedy 360 consistently delivers precise results. Versatile applications Gjdpfx Aozlb Absg Sjuh The machine is suitable, among other things, for processing: ✔ Acrylic ✔ Wood and plywood ✔ MDF ✔ Leather ✔ Paper and cardboard ✔ Rubber ✔ Textiles ✔ Plastics ✔ Glass (engraving) ✔ Coated metals (marking) This makes the laser ideal for companies in the fields of advertising technology, sign manufacturing, model making, personalization, industrial marking, or prototype construction. Your advantages at a glance ✔ New laser tube – ready for immediate use ✔ Very well-maintained overall condition ✔ Precise engraving and cutting quality ✔ High working speed ✔ Proven Trotec technology ✔ Easy operation with JobControl ✔ Reliable industrial machine with high value retention Inspection is highly recommended We invite you to personally inspect the excellent condition of the machine. An inspection and a test run can be arranged at any time by appointment.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: S36-1969, laser power: 60 W, type of cooling: air, total width: 830 mm, total height: 1,055 mm, total length: 1,221 mm, overall weight: 300 kg, We present the Trotec Speedy 360 CO2 laser with a power output of 60 watts, manufactured in October 2020. Equipped with Sonar autofocus technology, this laser is ready for immediate use and is fully functional. Gedpfx Aezzkg Ieg Ssuh The scope of delivery includes: - Trotec Speedy 360 60-watt air-cooled laser and Atmos Duo plus HEPA 230V - Laptop including Win10 and CorelDraw - Aluminum grid cutting table - with pump for air supply - Rulers in mm - with masking tape - Extraction nozzle 75mm - Connection cable Technical data: - Working area: 813 mm x 508 mm - Dimensions: 1221 x 830 x 1055 mm - Laser power: CO2 60 watts - Laser source: CO2 laser, digitally controlled, air-cooled - Air assist: Improves cutting results by blowing away heat and gases - Movable starting point: Enables precise selection of the starting position for laser engraving/laser cutting - Resolution: User-selectable from 100 to 1000 dpi - Connection: USB interface

Condition: good (used), Ram punch AMC Hydromatic 220 Label die cutter A professional machine made in Italy. AMC is a world leader in the production of label die-cutting machines. Very good condition. The machine is 100% functional and ready for production. This is the model currently in production. Technical specifications: Maximum format: 220 x 220 mm Number of cycles: 18/min Productivity: 900,000 sheets/h Weight: 700 kg The machine is equipped with a hydraulic quick-action unit. Photo safety barriers. Adjustable feed table in all directions. Two operating modes: semi-automatic and manual. Tail on the delivery. Guedpfxez Dtbwj Ag Soh

Condition: used, Year of construction: 2017, overall weight: 120 kg, Equipment: documentation/manual, ABB IRB 360-8/1130 FlexPicker Manufacturer: ABB Model: IRB 360-8/1130 FlexPicker Robot type: Delta/Parallel robot, 4-axis Design: High-speed pick-and-place industrial robot Payload: up to 8 kg Reach: approx. 1,130 mm Application area: Pick & Place, sorting, packaging, assembly, and material handling Controller: ABB IRC5 Mounting: Ceiling mounting Drives: Servo motors Guodsz Euakepfx Ag Seh Axes: 4 Protection class: depends on the specific design Application areas: Food industry, packaging technology, pharmaceutical industry, consumer goods industry, and general automation Description: 1 x ABB FlexPicker robot IRB360-8/1130 1 x IRC5 Single 1 x Handheld control panel FlexPendant DSQC679 1 x Gripper, Schunk GmbH 1 x Various spare parts The robot is disassembled. An inspection in Karlsruhe is possible. Description for the advertisement: The ABB IRB 360-8/1130 FlexPicker is a fast, 4-axis delta industrial robot for automated pick-and-place applications. The robot is designed for high cycle rates and precise handling and is particularly suitable for sorting, packaging, assembly, and transferring products. The design with a payload of up to 8 kg and a working range of approx. 1,130 mm enables its use in various automated production facilities.

Condition: excellent (used), functionality: fully functional, BANDSAW MACC MODEL: SPECIAL 360 A BELT DIMENSIONS: 3010X25X0.9 THICKNESS: 1.2 mm USED, OPERATIONAL MACHINE Gusdpjzz Sk Ijfx Ag Soh INTERNAL CODE: SVR

Condition: used, Year of construction: 1991, functionality: fully functional, Behringer bandsaw automat Model HBP 360 A Year : 1991 Capacity round : 360 mm. Godpozzpwfsfx Ag Sjuh Capacity square : 360 x 360 mm. Cutting speed : 20-130 m. / min. Max. feed pr. stroke : 600 mm. Band size : 5400 x 41 x 1,3 mm. Power : 7,5 kW Well maintained machine Delivery time 4 weeks

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, We offer you: CNC bed milling machine Gjdpfx Agoz A Ap Io Sjuh Manufacturer: DMG MORI Type: DMF 360-11 Year of construction: 2020 Control system: Celos with Siemens 840D sl Operate Technical data: Travel ranges: X-axis: 3,600 mm Y-axis: 1,100 mm Z-axis: 900 mm Main spindle: Speed range - main spindle: 20 - 15,000 rpm Drive power - main spindle (100/40%): 46 / 30 kW Torque: 200 / 130 Nm Work table: Table clamping surface: 4,200 x 1,100 mm Rotary table: d 1,050 mm Max. table load: 1,200 kg Tool changer: Number of tool positions: 120 Tool holder: HSK-A 63 Feeds: Rapid traverse (x/y/z): 40 / 40 / 40 m/min Operating hours: approx. 23,850 h Spindle hours: approx. 11,500 h Technical features & accessories: - 5-axis simultaneous machining - NC swivel milling head (B-axis) - Integrated rotary table, arranged on the left, hydraulically clamped - Full enclosure - Coolant tank - Direct measuring systems - Drag chain chip conveyor - Internal coolant supply (IKZ) 40 bar, includes: - Paper band filter, 600 l - 2 rotating viewing windows - Purge air for linear measuring systems - Rotary coupling for spindle - Flushing gun for chip flushing - 2x oil and emulsion mist separators - Blow-off air through the spindle center - Infrared measuring probe, Heidenhain TS 460 (if available) - Preparation for 3D quickSET - MPC – Machine Protection Control - Operating mode 4 - ATC (Application Tuning Cycle) - Preparation for Hofmann dividing head RW-NC 300 (dividing head not included) - Alternating operation - Tool breakage monitoring TRS2 - Tracy surface interpolation Accessories, tools and clamping devices shown in the pictures are only included in the scope of supply if this is stated in the additional information. Subject to changes and errors in the technical data and information, as well as prior sale!

Condition: good (used), Akebono OB-360 Banding Machine This machine is in very good condition and has been serviced. One of the most recognized machines in the world. The latest model. The machine operates in manual or automatic mode. After inserting the material, the machine wraps it with tape, compresses, and seals it to create an elegant package. Ideal for wrapping business cards, flyers, calendars, and other materials. Can be used with paper or foil tape. Technical specifications: Tape width: 29 mm Cycle speed: 28 cycles/min Frame dimensions: 420 x 210 mm Length: unlimited Guedezyz Dnspfx Ag Sjh Weight: 40 kg. Made in Japan.

Year of construction: 2019, condition: like new (used), MUT RWO 360/400-1150 Retort Heat Treatment Furnace - Like new: hardly used - Documentation available (both electronic and physical) - Pallet with spare parts included TECHNICAL DATA System type: RWO 360/400-1150 Furnace chamber temperature: ≤ 1150 °C for max. 1 hour Gujdpfx Ajiryyasg Seh Operating temperature: ≤ 1100 °C, ≤ 1050 °C in a vacuum Control stability: ± 2 K Temperature homogeneity: ± 6 K in the range of 600 °C to 1150 °C at the end of the stabilization period Control voltage: 230 VAC / 24 VDC Furnace working space: 360 x 400 mm Load: ≤ 50 kg Heating: Three-zone Pressure: ≤ 350 mbar Final vacuum pressure in the cold state: < 5 * 10-5 mbar in a clean, dry furnace Installation area: 900 x 1900 x 3000 mm Total system weight approx.: 1500 kg Sound pressure level: < 70 dB We assume no liability for the accuracy, completeness, and currency of the information provided.

Condition: used, functionality: fully functional, color channels: 1, resolution (max.): 1,200 dpi, paper weight (min.): 60 g/m², paper weight (max.): 110 g/m², paper width (min.): 297 mm, paper width (max.): 914 mm, paper height (min.): 419 mm, paper height (max.): 176 mm, number of feeding trays: 2, total length: 1,720 mm, total width: 800 mm, total height: 1,470 mm, input current: 6 A, input voltage: 230 V, Océ PlotWave 360 – Professional A0 multifunction plotter with color scanner and Estefold folder professional black and white printing; maximum format A0 / 36" / 914 mm; Godpfx Agozy Em Ho Souh speed up to 6 A1 prints per minute; print resolution up to 600 × 1200 dpi; large-format CIS color scanner; scanner resolution up to 600 × 600 dpi; scanning of originals up to 914 mm wide; scan formats: PDF, PDF/A, TIFF, and JPEG; Océ ClearConnect touchscreen display; Ethernet network connection; controller with 4 GB RAM and 500 GB hard disk; roll paper feed; complete with automatic Estefold folder for folding drawings, technical plans, and projects; also included in the sale are rolls of printing paper, provided as standard equipment/consumables.

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, load capacity: 360 kg, arm reach: 2,830 mm, controller manufacturer: KUKA, controller model: KRC4, The most popular robot series from KUKA, the KR 360 R2830 is sturdy, sleek, versatile, and outfitted with high performance features. The KUKA KR 360 R2830 robot has a repeatability of 0.05 mm. Frequently used in the following applications: - Palletizing -Depalletizing -Material Handling -Additive Manufacturing -Assembly -Dispensing -Remote TCP. Model: KRC4 KR360 R2830 Condition: Used & Tested Year: 2016 Controller Cabinet: KRC4 Included: Manipulator + KRC4 Control Cabin + All Wire Sets + Teach Pendant PLC MERKEZI Refurbishment Services Include with additional cost: • Cleaning: The surface of the robot panel and the robot has been cleaned. Gujdpfozl Sgkex Ag Ssh • Oil Changing: The oils of all axes (6 axes) of the robot have been replaced. • Battery Changing: All batteries have been replaced with the new ones. • Mechanical Maintenance: Gear wheels counter balance are checked and maintained after weight, repeatability tests. • Electronical Maintenance: Includes drivers, electronic boards, teach pendant and PC maintenance. • Polishing and Repainting: After the cleaning the robot gets polished and be painted to its original colour, can be painted to the colour that you desired. As PLC Merkezi EOOD, we have more than 400 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands. We also offer custom engineering services and design for your specific production needs.

Condition: used, mileage: 32,463 km, power: 315 kW (428.28 HP), first registration: 01/2026, fuel type: diesel, number of seats: 58, gearing type: automatic, emission class: euro6, color: white, brakes: retarder, Year of construction: 2026, Equipment: ABS, air conditioning, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, power assisted steering, traction control, = Additional options and accessories = - Adaptive cruise control - Autoradio - CD - Central lubrication - Climate control - Double glazing - DVD - EBS - Electrically operated mirrors - GPS navigation - Heater - Hydraulic power steering - Individual air cooling - Individual lighting - LED headlights - Multifunction steering wheel - Refrigerator - Reverse camera - Sun visor - Tachograph - TV/Video = More information = Technical information Engine capacity: 10.680 cc Dimensions (LxBxH): 1393 x 255 x 368 cm Make of engine: Mercedes Benz Gsdpfxez R Ny Sj Ag Seuh Other information Tyre tread remainder on axle 1: 80% Tyre tread remainder on axle 2: 80% Tyre tread remainder on axle 3: 80% Tyre tread remainder on axle rear: 80% Availability: in stock Bus refrigerator number: 1 Number of microphones: 2

Condition: used, mileage: 36,218 km, power: 315 kW (428.28 HP), first registration: 01/2026, fuel type: diesel, gearing type: automatic, emission class: euro6, color: white, brakes: retarder, Year of construction: 2026, Equipment: ABS, air conditioning, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, power assisted steering, traction control, = Additional options and accessories = - Autoradio - CD - Climate control - Double glazing - DVD - EBS - Electrically operated mirrors - GPS navigation - Heater Gujdpfx Ajz R Nzpeg Soh - Hydraulic power steering - Individual air cooling - Individual lighting - Refrigerator - Reverse camera - Sun visor - Tachograph - TV/Video = More information = Engine capacity: 10.680 cc Dimensions (LxBxH): 1393 x 255 x 368 cm Make of engine: Mercedes Benz Tyre tread remainder on axle 1: 80% Availability: in stock

Condition: good (used), Year of construction: 2011, operating hours: 16,640 h, load capacity: 1,600 kg, lifting height: 3,600 mm, fuel type: electric, mast type: duplex, construction height: 2,250 mm, Year of construction: 2011 Field of application: Internal logistics Guedpfxjz R Imvs Ag Sjh

Condition: used, mileage: 4,56,175 km, power: 315 kW (428.28 HP), first registration: 03/2017, fuel type: diesel, gearing type: automatic, emission class: euro6, color: white, brakes: retarder, Year of construction: 2017, Equipment: ABS, air conditioning, cruise control, electronic stability program (ESP), fog lights, immobilizer system, power assisted steering, traction control, trailer coupling, = Additional options and accessories = - Autoradio - CD - Climate control - Coffee-machine - Double glazing - DVD - EBS - Electrically operated mirrors - GPS navigation - Heater - Hydraulic power steering - Individual air cooling - Individual lighting - Kitchen - Portable radio set - Refrigerator - Reverse camera - Sun visor - Tachograph - TV/Video Gedsy Hxdzjpfx Ag Ssuh = More information = Engine capacity: 10.677 cc Dimensions (LxBxH): 1393 x 255 x 377 cm Make of engine: Mercedes Benz

Condition: new, Year of construction: 2026, functionality: fully functional, feed length X-axis: 1,300 mm, feed length Y-axis: 320 mm, feed length Z-axis: 450 mm, travel distance X-axis: 1,300 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 1,800 rpm, spindle speed (min.): 60 rpm, total height: 2,000 mm, total width: 2,100 mm, total length: 2,520 mm, table width: 360 mm, table length: 1,600 mm, type of input current: three-phase, rotational speed (max.): 1,800 rpm, rotational speed (min.): 60 rpm, table load: 500 kg, overall weight: 2,800 kg, input voltage: 400 V, workpiece weight (max.): 500 kg, space requirement width: 2,100 mm, space requirement length: 2,520 mm, space requirement height: 2,000 mm, warranty duration: 12 months, Equipment: documentation/manual, SALE - 5% OFF UNIVERSAL VERTICAL AND HORIZONTAL MILLING MACHINE This robust universal milling machine is equipped with vertical and horizontal ISO50 spindles. The complete vertical spindle head moves along the column guideways, while its adjustable angle enables machining in various positions. The machine is suitable for producing tools, fixtures, engine components and other precision parts. Automatic and rapid feeds on all three axes, servo drives and a digital readout ensure efficient, accurate and convenient operation. KEY FEATURES Vibration-damping cast-iron construction Vertical and horizontal ISO50 spindles Automatic feed on all three axes Rapid feed on all three axes Infinitely variable feed adjustment 10 Nm servo drives Digital readout (DRO) Large worktable with a 500 kg load capacity Hardened and ground gears for reduced operating noise Central lubrication system Adjustable vertical head angle Functional and intuitive control panel Protective guards compliant with current safety requirements Worktable guard available as optional equipment TECHNICAL SPECIFICATIONS Gsdoyuculjpfx Ag Seuh Table size: 1600 x 360 mm Maximum table load: 500 kg Table swivel range: -45° to +45° X-axis travel: 1300 mm Y-axis travel: 320 mm Z-axis travel: 450 mm X-axis feed rate: 30-750 mm/min Y-axis feed rate: 20-500 mm/min Z-axis feed rate: 15-375 mm/min X-axis rapid feed: 1200 mm/min Y-axis rapid feed: 800 mm/min Z-axis rapid feed: 600 mm/min Number of T-slots: 3 T-slot width: 18 mm T-slot spacing: 80 mm Horizontal spindle taper: ISO50 Vertical spindle taper: ISO50 Upper ram travel: 550 mm Vertical spindle-to-table distance: 196-646 mm Horizontal spindle-to-table distance: 20-470 mm Vertical spindle speeds: 12 speeds, 60-1750 rpm Horizontal spindle speeds: 12 speeds, 60-1800 rpm Vertical spindle motor: 4.0 kW Horizontal spindle motor: 5.5 kW X-axis feed motor: 1.5 kW Y-axis feed motor: 1.5 kW Z-axis feed motor: 1.5 kW Servo drive torque: 10 Nm Machine dimensions (L x W x H): 2520 x 2100 x 2000 mm Weight: 2800 kg TRANSPORT We can arrange delivery of the machine to the customer. Transport costs are calculated individually according to the delivery location and specific transport requirements. Please contact our sales department to receive a transport quotation.

Condition: refurbished (used), functionality: fully functional, 1. Machine specifications: * Travel ranges - Table longitudinal travel (x) 1190 mm - Cross slide transverse travel (y) 530 mm - Column vertical travel (z) 540 mm * Table surface area 480 x 1600 mm * T-slots 18 mm at 80 mm spacing 5 * Table load capacity 1500 kg * Tool holder SK 50 DIN 2080 * Diameter in the front bearing 100 mm * Milling spindle drive power 15 kW * Speed range 35.5 ... 1800 min-1 * Number of speeds 18 * Step ratio, automatic shifting 1.25 * Max. torque 2200 Nm * Feeds 3 ... 2000 mm/min * Rapid traverse longitudinal and transverse 10000 mm/min vertical 5000 mm/min * Coolant system 40 l/min * CNC control TNC 360 Heidenhain, feed motors SIEMENS * Connected load 35 kW * Machine weight 5400 kg 2. Technical condition The machine was only used in production until May 2009!!! Due to the overhaul, the machine meets the acceptance conditions for new machines. All guideways have been re-scraped. Ball screw drive and measuring systems in all axes have been replaced. All motors have been checked and repaired in the authorized workshop. The milling spindle has been checked and repainted. A milling head can be provided for vertical machining. 3. Warranty: last inspection 04/2026 3 months 4. Prices * Machine 59,000.00 € * Assembly/Commissioning 5,250.00 € 5. Delivery conditions: * Pricing: Prices are quoted net for delivery or service ex works, excluding value-added tax. We reserve the right to sell the machine in the meantime. Our terms and conditions of delivery and service apply. Gsdpfx Ajz H Ttxsg Sjuh * Payment terms: 30% down payment upon order 60% upon delivery 10% after handover * Delivery date: ex warehouse