Used Traub Tns 30 42 for sale (88)

Condition: used, Year of construction: 1992, machine/vehicle number: 690, CNC control Traub system TX8 D, with 1 turret with 14 tool stations and 1 turret with 9 tool stations, driven tools, max. turning length approx. 1000 mm, bar capacity 80 mm, power 73 kW, with fleece filtration system and chip conveyor. Iajdpfx Aey Sqimomyst

Condition: ready for operation (used), Year of construction: 2009, spindle speed (max.): 4,500 rpm, travel distance X-axis: 250 mm, travel distance Z-axis: 600 mm, number of axes: 4, This 4-axis TRAUB TNC 65 DG was manufactured in 2009. It features a powerful tool drive turret with a speed of 4000 rpm and a high-pressure coolant system with programmable pressure stages. The machine is designed for machining metals and plastics, equipped with a C-axis for numerically controlled turning and positioning. If you are looking to get high-quality turning capabilities, consider the TRAUB TNC 65 DG horizontal turning machine we have for sale. Contact us for further details. • Control system TX8i with 64-bit RISC high-performance processor and additional PLC high-performance processor, integrated PC • TX8i control with 64-bit technology including TFT color flat screen and electronic handwheel • Electrical system according to VDE/EN 60204 • Multi-range transformer for 460V / 400V / 380V / 220V / 200V, 50 Hz • Operating voltage machine 400V 50 Hz • Operating voltage accessories 230V 50 Hz • Control voltage 24V DC • Machine equipped with interference suppression set for industrial networks (EMC compliant) • CE conformity declaration and CE marking • Designed for machining metals and plastics with defined cutting edge • Main spindle C-axis (numerically controlled turning and positioning device) • Counter spindle C-axis with speed-synchronous control • Tool drive turret 1: power 3.1 kW, speed 4000 rpm • Tool drive turret 2: power 3.1 kW, speed 4000 rpm • Tool monitoring TX8i with wear and breakage control via axis motor monitoring • Thread cutting without compensating chuck • Software TRAUB Polyform for milling programming with C-axis (front, longitudinal, cylindrical surface) • Network connection preparation with Ethernet interface and RJ45 socket • Z/V axis counter spindle software with defined end position (plan surface transfer) Iaodpfx Amjy Sg Nieyjt • Maximum clamping diameter up to 60 mm depending on system Additional equipment • Workpiece unloading device with gripper in turret 2 (automation) • Chip conveyor (hinged belt), discharge height 1200 mm • High-pressure coolant system with programmable pressure stages 20 / 5 bar • Preparation for extraction and filter system, connection Ø200 mm, 400V socket • Bar feeder interface preparation DNH 61 • Collet chuck system RÖHM for spindle Ø65 mm • Reducer sleeve for main spindle Ø65 mm Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: ready for operation (used), Year of construction: 1999, number of axes: 5, This 5-axis TRAUB TNC65 DG was manufactured in 1999. It features a robust control system with TRAUB TX8H technology, dual tool carriers with 10 stations each, and a maximum clamping diameter of 60 mm. The machine is equipped with a coolant cleaning system and a hinged belt conveyor for efficient chip removal. If you are looking to get high-quality turning capabilities, consider the TRAUB TNC65 DG horizontal turning machine we have for sale. Contact us for further details. • Control system: TRAUB TX8H (32-bit technology) • Main spindle: Yes • Counter spindle: Yes • Spindle synchronization: Yes • C-axis main spindle: Yes • C-axis counter spindle: Yes • V-axis: Yes (programmable position) • Tool carriers: 2 (tool carrier I and II) • Driven tools on tool carrier I: Yes • Driven tools on tool carrier II: Yes • Number of tool stations: 10 per tool carrier • Thread cutting: Without compensating chuck • Drilling and milling units: X-direction (i=1 and i=3) and Z-direction (i=1 and i=3) • Coolant system: Cleaning system with cyclone filter • Coolant tank capacity: approx. 470 liters • Coolant pump: Supply for both turrets integrated • Hydraulic system: Yes • Operating voltage: 400 V / 50 Hz • Control voltage: 24 V DC • Accessory voltage: 230 V / 50 Hz Iedpfx Ajy R Uvusmysat • Multi-range transformer: 460 V / 400 V / 380 V / 220 V / 200 V • Standards: EC Machinery Directive, EMC Directive, Low Voltage Directive, DIN EN 292, DIN EN 294, DIN EN 418, DIN EN 60204 • Tool monitoring: Tool breakage and wear monitoring • Programming software: TRAUB Polyform • Coolant type: Water-based coolant compatible Additional equipment • Chip conveyor: Hinged belt conveyor • Bar feeder: TRAUB DNH 61-3000 (preparation included) • Workpiece ejection device: Yes • Workpiece removal device: Yes, with gripper • Collet system: Röhm, max clamping diameter 60 mm Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: good (used), Year of construction: 2008, functionality: fully functional, cam-controlled automatic lathe including bar magazine - Manufacturer: PMT (Traub India) Iajdpfxey R Tqqj Amyjt - max. bar diameter: 25 mm - tailstock - 2 vertical tool holders - 2 horizontal tool holders - Weight approx. 650 kg - Dimensions (LxWxH) approx. 1000 x 600 x 1500 mm - Bar loader IEMCA AS 325/62 (max. bar length 6,200 mm)

Condition: good (used), Year of construction: 2015, functionality: fully functional, cam-controlled automatic lathe including bar magazine - Manufacturer: PMT (Traub India) - max. bar diameter: 25 mm - tailstock - 2 vertical tool holders - 2 horizontal tool holders - Weight approx. 650 kg - Dimensions (LxWxH) approx. 1000 x 600 x 1500 mm - Bar loader IEMCA AS 325/62 Iajdpfxoy R Tm Ss Amyet (max. bar length 6,200 mm)

Condition: good (used), functionality: fully functional, cam-controlled automatic lathe including bar loader magazine - max. bar diameter 25 mm - tailstock - 2 vertical tool holders - 2 horizontal tool holders Iajdpfxoy R Tg Ss Amyot - weight approx. 650 kg - dimensions (LxWxH) approx. 1000 x 600 x 1500 mm - bar feeder IEMCA AS 325/62 (max. bar length 6,200 mm)

Condition: good (used), Year of construction: 2009, functionality: fully functional, CNC Sliding Head Lathe Manufacturer: Traub Machine Model: TNL 12 Control: Traub Year of manufacture: 2009 TECHNICAL DATA Headstock - Max. bar diameter (mm): 12.7 - Bar stock tolerance (DIN 671) (mm): Ø Xh9 - Max. spindle speed (rpm): 12,000 Max. turning length / headstock stroke - With fixed guide bush (mm): 130 - With rotating guide bush (mm): 80 - With programmable guide bush (mm): 80 C-axis resolution (degrees): 0.001 Rapid traverse Z1 (m/min): 30 Tool carrier 1 - X1 axis travel (mm): 35 - Y1 axis travel (mm): 38 (-10 +28) - Rapid traverse X1/Y1 (m/min): 15 - Chip-to-chip time (s): 0.3 Tool carrier 2 - X2 axis travel (mm): 35 - Z2 axis travel (mm): 50 - Rapid traverse X2/Z2 (m/min): 15 - Chip-to-chip time (s): 0.3 Tool drive for tool carriers 1 and 2 - Max. speed (rpm): 8,000 - Max. number of driven tools: 2xG - Clamping diameter for drilling tools (mm): 0.5–7 Sub-spindle / Front attachment - Max. bar diameter (mm): 12.7 - Max. longitudinal stroke 23, 24 / Xg (mm): 140 / 228 - Rapid traverse 23,24/X3 (m/min): 30 - Tool positions (number): 4 - Max. speed (rpm): 12,000 - C-axis resolution (deg): 0.001 Rear attachment, driven / fixed - Z travel, driven with work spindle (mm): 80 - Tool holder diameter (mm): 20 - Tool positions (number): 3 Rear attachment (X4 axis) - X4 travel (mm): 39 - Rapid traverse speed (m/min): 15 - Tool holder diameter (mm): 28 - Tool positions (number): 4 Tool drive for rear attachment (with X4 axis) - Max. speed (rpm): 10,000 - Max. number of driven tools: 4 - Clamping diameter for drilling tools: - Driven (mm): 0.5–7 - Non-driven (mm): 0.5–10 Coolant system - Single-stage pump pressure (bar): 3 Ijdpfx Amoy N A S Usyjat - Tank capacity (l): 180 - Delivery rate (l/min): 40 EQUIPMENT FEATURES - Chip conveyor - FMB Minimag 18 bar feeder - High-pressure system - Fire suppression system Subject to changes and errors in technical data and specifications.

Condition: good (used), Year of construction: 2007, functionality: fully functional, CNC Swiss-type Lathe Manufacturer: Traub Machine Model: TNL 12 Control: Traub Year of Manufacture: 2007 TECHNICAL DATA Spindle Head - Max. bar diameter (mm): 12.7 - Material quality (DIN 671) (mm): Ø Xh9 - Max. spindle speed (rpm): 12,000 Max. machining length / spindle stroke - With fixed guide bushing (mm): 130 - With rotating guide bushing (mm): 80 - With programmable guide bushing (mm): 80 C-axis resolution (degrees): 0.001 Rapid traverse Z1 (m/min): 30 Turret 1 - X1 axis travel (mm): 35 - Y1 axis travel (mm): 38 (-10 +28) - Rapid traverse X1 / Y1 (m/min): 15 - Chip-to-chip time (s): 0.3 Turret 2 - X2 axis travel (mm): 35 - Z2 axis travel (mm): 50 - Rapid traverse X2/Z2 (m/min): 15 - Chip-to-chip time (s): 0.3 Iasdpfoy N A Atjx Amyet Tool Drive for Turret 1 and 2 - Max. speed (rpm): 8,000 - Max. tools (number): 2xG - Clamping diameter for drilling tools (mm): 0.5-7 Sub-Spindle / Front Attachment - Max. bar diameter (mm): 12.7 - Max. longitudinal stroke 23, 24 / Xg (mm): 140 | 228 - Rapid traverse 23,24/X3 (m/min): 30 - Tool stations (number): 4 - Max. speed (rpm): 12,000 - C-axis resolution (degrees): 0.001 Backworking Attachment (dragged / fixed) - Z stroke, dragged with work spindle (mm): 80 - Holder diameter for tools (mm): 20 - Tool stations (number): 3 Backworking Attachment (X4 axis) - X4 travel (mm): 39 - Rapid traverse speed (m/min): 15 - Holder diameter for tools (mm): 28 - Tool stations (number): 4 Tool Drive for Backworking Attachment (with X4 axis) - Max. speed (rpm): 10,000 - Driven tools max. (number): 4 - Clamping diameter for drilling tools - driven (mm): 0.5 - 7 - non-driven (mm): 0.5 - 10 Coolant System - Single-stage pump pressure (bar): 3 - Tank capacity (l): 180 - Pump delivery rate (l/min): 40 EQUIPMENT FEATURES - Chip conveyor - FMB Minimag 18 bar feeder - High-pressure coolant system - Fire extinguishing system Subject to changes and errors in technical data and specifications.

Condition: used, Year of construction: 2022, turning diameter over bed 254 mm spindle passage 20 mm Iaedpfx Aoy Nfdtomyot turning length 120 mm Control TX8i-s total power requirement 40 kW weight of the machine ca. 5 t

Condition: good (used), Year of construction: 2002, TRAUB TNL 12/7 CNC sliding headstock automatic lathe TECHNICAL DATA Bar capacity: 12 mm Main headstock strokes: 130 / 80 mm Spindle power: 4 kW Speed, main spindle: 12`000 rpm Upper turret: 6 positions Lower turret: 6 positions Number of driven tools, turret: 6 Max diameter, counter spindle: 12 mm Speed, counter spindle: 12`000 rpm Dimensions: 2850 x 1100 x 1480 mm Iajdet E Dbyspfx Amyst SCOPE OF OFFER U.A: (list not exhaustive): Traub TNL 12/7 CNC lathe Meyrat high-frequency spindles, 2 pieces Tool holders (driven and non-driven) FMB Minimag 3200 C bar loader Hydraulic unit High pressure pump Chip conveyor Exact scope of supply according to photo gallery No responsibility is taken for the correctness, completeness and up-to-dateness of the information.

Condition: excellent (used), Year of construction: 2013, Traub TNL 18-7B CNC Automatic Lathe Base machine: 2441 x 1396 mm Weight: 3800 kg Spindle height above floor: 3800 mm Connected power: 24 kW Main spindle Max. bar capacity: 18 mm Max. speed: 12,000 rpm Cross-cut speed: 5,000 rpm Z stroke: 205 mm Rapid traverse: 40 m/min Z measuring system resolution: 0.001 mm Feed force: 3000 N Spindle head / short taper: Traub short taper mount Max. clamping force: 1400 daN Max. clamping pressure: 40 bar Min. clamping pressure: 7.5 bar Piston area: 40 cm2 Total cylinder travel: 5 mm Clamping tube thread: M25 X 1 Counter spindle Workpiece diameter: 21 mm Workpiece clamping depth: 180 mm Max. speed: 12,000 rpm Strokes: X: 120 mm Y: -20/+40 mm Z: 250 mm Rapid traverse: X: 20 m/min Y: 20 m/min Z: 40 m/min Max. clamping pressure: 30 bar Min. clamping pressure: 10 bar Top tool turret with B-axis Number of stations: 8 Shank cross-section, turning tool: 16 x 16 mm Stroke: X: 120 mm Y: -25/+40 mm Z: 250 mm Rapid traverse: X: 20 m/min Y: 20 m/min Z: 40 m/min Chip-to-chip time: 0.5 sec Measuring system resolution: X: 0.0005 mm Y: 0.0005 mm Z: 0.001 mm Lower tool turret Number of stations: 7 + counter spindle Shaft cross-section, turning tool: 16 x 16 mm Stroke: X: 120 mm Y: -20/+40 mm Z: 250 mm Rapid traverse: X: 20 m/min Y: 20 m/min Z: 40 m/min Chip-to-chip time: 0.5 sec Measuring system resolution: X: 0.0005 mm Y: 0.0005 mm Z: 0.001 mm Tool drive for upper tool turret Number of driven stations: Max. 8 Drive power: 2 kW Max. speed: 12,000 rpm Torque: 3.9 Nm Tool drive for lower tool turret Number of driven stations: 7 + counter spindle Drive power: 3.4 kW Max. speed: 12,000 rpm Torque: 7.3 Nm Tool drive for the rear unit Number of stations: 7 Number of driven stations: max. 3 Pitch spacing: 46 mm Drive power: 2 kW Max. speed: 7,500 rpm Torque: 4.7 Nm Drive power: 2 kW Max. speed: 4,000 rpm Torque: 11.8 SCOPE OF OFFER INCLUDES (list is not exhaustive): Traub CNC lathe Tool holders, driven and non-driven High-pressure and belt filter system Oil mist separator Fire extinguishing system Chip conveyor Bar loader Operational documentation Iajdpjwg Taksfx Amyst For the exact scope of offer, see the photo gallery No liability is assumed for the accuracy, completeness, or timeliness of the information provided.

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, 1 x automatic lathe Traub A 25 Isdpfoy R Nwyox Amyjat with bar feeder Iemca AS 325/32 The machine can be inspected under power, or a video can be sent.

Condition: used, Year of construction: 2005, Technical details: turning diameter: 275 mm turning length: 900 mm spindle passage: 65 mm power capacity at 100 % load: 25/20 kW spindle turning speed range: 1 - 5000 U/min spindle diameter in front bearing: 110 mm c-axis: 1 - 500 U/min. number of workpiece supports: 4 tool turret: 1 x-axis: 290 mm y-axis: 165 mm z-axis: 360 mm b-axis: 360 ° rapid speed: 18/30 m/min number of tools: 2x2 + 2x2 number of driven tools: 2x2 + 2x2 mm toolpiece turning speed range: 8000 / 2000 U/min Iodpfx Amswp D Nboyjat power capacity: 25% ED 5,8 kW tool taper: TRAUB 60 tool turret: 2/3/4 x-axis: 170 mm z-axis: 600/950 mm y-axis: +/- 60 mm rapid speed: 18/15/30 m/min number of driven tools: 10 mm toolpiece turning speed range: 1 - 6000 U/min power capacity: 25% ED 5,8 kW tool taper: DIN 69880 40 x 63 total power requirement: 95 kW weight of the machine ca.: 16 t dimensions of the machine ca.: 10,0 x 3,5 x 3,0 m with CNC TRAUB TX 8i, Barloader TRAUB Stamag DNH61 / 3000, Main and Sub spindle with C-axis 1 support with B-axis 3 turret supports dust exhauster, coolant attachment with coalescence-seperator and chip conveyor 2 pc. 3-jaw chuck SMW KNCS-N 170-43 2 pc. HAINBUCH Spanntop chuck 40 pc. various tool holder non-driven 6 pc various tool holder driven Spare parts package *

Condition: used, Year of construction: 1990, Technical details: turning diameter: 445 mm turning length: 2000 mm Iaodpfx Asw I R Ndjmyjt turning diameter over bed slide: 660 spindle bore: 65 mm spindle speeds:: 16 - 3150 U/min. rapid motion - x-axis: 10 mm/min rapid traverse Z-axis: 15 m/min total power requirement: 34 kW weight of the machine ca.: 7,5 t dimensions of the machine ca.: 6 x 2,5 x 2,2 m with CNC Control TX 8 D C-axis driven tooling 14 station turret head 3 jaw chuck dia. 315 mm tailstock, steady as NC-axis diverse driven toolholders diverse turning toolholders chip conveyor and coolant attachment *

Condition: used, Year of construction: 2005, turning diameter 5-42 mm Iodpfx Amjy Nd U Deyjat turning length 3200 mm control Traub TX8i x-axis 50 mm z-axis 50 mm weight of the machine ca. 4000 kg

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, spindle speed (max.): 8,000 rpm, bar passage: 32 mm, controller model: Traub TX8i-S, number of slots in tool magazine: 12, Equipment: chip conveyor, TECHNICAL DETAILS Bar capacity: 26 / 32 mm Max. main spindle speed: 8,000 rpm Axes: X1 / Y1 / Z1, C-axis integrated in the main spindle Turret: 1 Tool stations: 12 Drive power: 6.7 kW (100% duty cycle) / 10.7 kW (40% duty cycle) Torque: 21 Nm (100% duty cycle) / 32 Nm (40% duty cycle) MACHINE DETAILS Power-on time: 116,721 h Operating hours: approx. 48,000 h Control: Traub TX8i-S DIMENSIONS & WEIGHT Dimensions (L × W × H): approx. 4.4 × 1.4 × 1.7 m Machine weight: approx. 4,000 – 4,200 kg Iodeyzxp Tspfx Amyoat EQUIPMENT Chip conveyor: hinged belt, discharge height approx. 950 mm

Condition: ready for operation (used), functionality: fully functional, Single spindle automatic lathe TRAUB A-15 is in perfect condition, ready for use Iasdpoyy Nz Rjfx Amyst Max turning diamater 15 mm

Condition: used, functionality: fully functional, Traub automatic lathe Iodpfx Ajwcqv Ismyeat

Condition: used, Year of construction: 1997, spindle passage 80 mm max. turning diameter 460 mm Iajdpexbtpxjfx Amyet Max. Turning length 1.000 mm control System TX 8F max. Spindle speed 2.800 U/min. CNC lathe | TRAUB - TNA 500 The machine is in a well-maintained condition. The machine videos from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags:TNA500 | TNA-500

Condition: used, Year of construction: 1996, spindle passage 80 mm max. turning diameter 395 mm Max. Turning length 750 mm Iedpsxbtqvofx Amysat control System TX 8H max. Spindle speed 3.150 U/min. CNC lathe | TRAUB - TNA 400 The machine is in a well-maintained condition. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags:TNA400 | TNA-400

Condition: good (used), Machining diameter max: 36 mm Maximum spindle speed: 6300 rpm No. of Spindles: 2 Controller: Traub TX8i Toolchanger 1: No. of tools: 12 positions X-axis travel: 50 mm Z-axis travel: 50 mm Toolchanger fronside: No. of tools: 7 positions Speeds: 150 - 3000 Rpm 300 - 6000 Rpm Max. diameter: 40 mm X-axis travel: 370 mm Z-axis travel: 250 mm Toolchanger backside: No. of tools: 5 Speeds: 150 - 3000 Rpm 300 - 6000 Rpm Max. diameter: 40 mm X-axis travel: 73 mm Barfeeder: FMB Turbo 5-42 Barlength: 3200 mm Bardiameter: 5 - 42 mm Iaedpfx Astrvzxomyet Country of origin: Germany Machine LxWxH: 3400 x 1300 x 1700 mm Machine weight: 4000 kg

Condition: used, Year of construction: 2001, turning diameter 340 mm turning length 750 mm control SYSTEM TX 8H spindle passage 80 mm swing over plan sled 530 mm greates pass round over bed 665 mm turning speed range - main spindle 3.150 min/-1 drive capacity - main spindle 22 kW number of tool places 12 Pos. In our assessment, the machine is in good used condition and can be inspected under power by appointment. Two machines are available. Price per unit. Machine 1: - Images 1-5 - Operating hours approx. 55,790 h Machine 2: - Images 6-10 - Operating hours approx. 54,347 h Technical Features & Accessories: - Y-axis - Accessory package with rigid and driven tool holders - Chip conveyor Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and specifications, as well as prior sale! Iasdpfx Ajxwdw Esmyjt

Condition: good (used), Grinding wheel puller, cup wheel puller, double bench grinder puller, surface grinder puller, cylindrical grinder puller, dressing head, dressing head for grinding machines Quantity: 1 piece available -Dimensions: 325/130/H135 mm -Weight: 7.3 kg Isdjd R Ikdepfx Amyjat

Year of construction: 2022, condition: used, functionality: fully functional, TRAUB Stone Dry Saw MULTI-STONE 520 MULTI-STONE 520 — Year of manufacture 2022 Used, from the professional rental fleet of Kurt König Baumaschinen GmbH, Einbeck, Germany. Condition & Notes: - Condition: Used, ex-rental, regularly serviced - Functionality: Fully operational - Product photos to follow — please contact us for current images - On-site inspection in 37574 Einbeck available by appointment Iajdpfey A E Nisx Amyjt Price EUR 3,750 plus VAT | EXW Einbeck | Delivery upon request

Condition: used, Year of construction: 1987, operating hours: 80,678 h, functionality: fully functional, Description follows Isdjx A Hl Aspfx Amyoat