Used Trim Line for sale (11,791)

Year of construction: 1979, condition: good (used), strip width: 600 - 1.600 mm strip thickness: 0,4 – 2 mm edge trimming width: 5 - 60 mm speed: approx. 60 m/min Tsdpfsgnyglsx Abtsb

Condition: good (used), Production line consisting of: - BACCI FC 8 - BACCI DOUBLE JET - KUKA robots Tedpfx Ast Tw S Usbteb BACCI FC 8 The automatic copying-shaping-sanding machine executes milling and sanding operations on components of chairs, tables, armchairs, sofas, beds, furniture, frames, with the best finish and highest output. Max working length: 2700mm Max working height: 180mm Max working width: 500mm Max working width with round end: 350mm Max speed working table: 15m/min Max table return speed: 50-100m/min BACCI DOUBLE JET DOUBLE-JET is double machining centre with 6+6 interpolated CN axis, equiped with hopperfeeder system for automatic loading/unloading of the pieces.

Condition: good (used), Production line consisting of: - BACCI FC 8 - BACCI DOUBLE JET - KUKA robots BACCI FC 8 The automatic copying-shaping-sanding machine executes milling and sanding operations on components of chairs, tables, armchairs, sofas, beds, furniture, frames, with the best finish and highest output. Max working length: 4000mm Max working height: 180mm Max working width: 500mm Max working width with round end: 350mm Max speed working table: 15m/min Tjdpfx Abot Txfpotob Max table return speed: 50-100m/min BACCI DOUBLE JET DOUBLE-JET is double machining centre with 6+6 interpolated CN axis, equiped with hopperfeeder system for automatic loading/unloading of the pieces.

Condition: as good as new (ex-display), Technical specifications: Working surface 2800 x 1300 mm Maximum mould height 600 mm Vacuum pump 40 m³/h Vacuum vessel 2 x 200 l Membrane Rubber Configuration: - Oil free rotary valve vacuum pump (sub frame) - Vacuum vessel for fast vacuum ejection (sub frame) - Clamped membrane Tjdpfx Abeb Awz Hjtjb - Double frame for membrane clamping - Separate rubber sealing strip - Water proof robust working plate with cross milling - Vacuum height adjustable by means of electronic switch Control: The operating elements are integrated into the switch cabinet. The switch cabinet is installed into the base frame, including cable and 16 Amp. Cekon plug.

Condition: used, Year of construction: 2000, operating hours: 26,600 h, machine/vehicle number: LC612, Used Tetra pak line Overhauled TBA 19 200 ml slim Technical Specifications & Performance DataThis used bottling line is a second hand Tetra Pak aseptic carton packaging solution configured for 200 ml Slim packs. It is engineered for industrial packaging and beverage production of milk and juice products, with reliable performance and efficient downstream handling.Configuration: Tetra Pak TBA/19 200B Slim filler + TSA21 straw applicator + TCP70 case packer + conveyor line + line controller and paper trolleyProduction speed: up to 7,500 packs/hourPack volume: 200 ml SlimFilling technology: AsepticContainer type: Carton (brick packs)Main models and codes: TBA/19 200B (Dev. Step 010V), TSA21, TCP70Operating hours: 26,600Indicative years: filler 2000, packer 2008, straw applicator 2000Advanced Automation & Control SystemsThe line is equipped with industrial automation architecture suitable for high-uptime food and beverage operations. Assessment indicates a GE PLC platform on downstream equipment with recommended PLC and I/O cover upgrades to ensure long-term reliability.Control: Central line controller with integrated conveyor logicPLC/HMI: GE PLC upgrade recommended for DE modulesChangeover: 200 ml Slim change kit included; additional format parts may be required for other sizesSafety: Guarding and interlocks typical of aseptic packaging machineryProduction Line Integration CapabilitiesThis second hand bottling equipment is designed for inline operation from aseptic filling through straw application and case packing. Conveyors provide smooth transfer between machines, enabling balanced production flow and efficient accumulation.Inline operation: Filler → Straw applicator → Case packerMaterial handling: Conveyor line with integration to line controllerApplication range: Ideal for milk and juice in 200 ml Slim cartonsScalability: Potential to adapt to additional carton sizes with proper change partsMachine Condition & Maintenance HistoryThe line has been assessed after maintenance activities and prior to full recommissioning. The filler can be operated up to production step (water test completed). Downstream equipment (DE) powers on but requires further interventions before heating and full operation. An overhaul is recommended with component replacements across superstructure, machine body, jaw system, final folder, service unit, strip applicator, and electrical systems.Current status: Under maintenance/refurbishmentCondition summary: Filler fair-to-poor; DE in poor condition; overhaul advised (6,000/8,000/12,000-hour packages)Operational Performance & VersatilityEngineered by Tetra Pak for aseptic beverage production, the line supports long-life products such as UHT milk and ambient juices. The TSA21 straw applicator ex... Tedjyvilzopfx Abtob

Condition: excellent (used), Year of construction: 1990, Description to follow! Tsdexzk Ilspfx Abtjb

Condition: good (used), Year of construction: 2000, For Sale. König Industrie Rex Automatic bread roll line included: Lifting tipper - type: Herkules HK600/3000 Heading machine – model: Industrie Rex I – type: T 6/5/4 S-1/1-70 9 – year of construction: 2000 – with TRÖ pre-portioner with oil system – 6 rows (row reduction possible to 5 or 4 rows) long former scarifying unit stamp unit pre-proofing cabinet – model: KGV – type: RR610 SOHN-L-(B) 1035 – year of construction: 2000 Siemens S7 control. viewing is possible here on location! Transport in consultation. price: €60,000 EXW immediately available. If you have any questions or comments, please let us know. Kind regards, Leo Holland Todpswtfkzofx Abteb

Condition: new, Year of construction: 2026, functionality: fully functional, Equipment: CE marking, Blanching bath with steam for Salmon pieces. Blanching area 3000 mm. Mesh belt width 600 mm. Fish loading at the entrance (manually) – Water supply from system D – 40 mm. Steam supply 30 mm, 6-8 bar 150gr. Bath with double wall (heated). Lids can be lifted. Two hatches in the side wall. T regulation from 70-95 grC, mesh belt speed adjustable - from the control cabinet Ventilation outlet for the bath 200mm. Cooling in the exit area - cold water from the system. Level overflow. Water level sensor in the bath - for filling the bath. Tedpfxov E Ec Ns Abteb Steam heating - snake. Closed system. Knife at the end of the mesh belt (belt cleaning).

Condition: used, Used Pfaudler BE5000 vertical glass lined reactor. Approximately 5,000 litre capacity. Internal rated 6.6 bar/full vacuum design pressure at -29 to 200 deg.c. External mild steel jacket rated 6.6 bar/full vacuum design pressure at -29 to 200 deg. Unit has welded dished top and bottom heads. Includes top entry 4-blade CBR Turbine type agitator driven by a 10.5 kw 415 volt 292-1460 rpm 3/50 motor. Unit is mounted on lugs. Tsdoykn Rdopfx Abtjb

Year of construction: 2006, condition: excellent (used), Description to follow! Todpfx Aexy S Ecjbtob

Condition: new, mileage: 1 km, power: 235 kW (319.51 HP), first registration: 01/2026, fuel type: diesel, number of seats: 57, gearing type: automatic, emission class: euro6, color: other, brakes: retarder, total length: 12,100 mm, total height: 3,460 mm, Year of construction: 2026, Equipment: ABS, air conditioning, cruise control, = Additional Options and Accessories = Other - Webasto Other - Air conditioning = Further Information = Damage: none Tedoxwxghjpfx Abtob = Company Information = We are an international company based in Belgium, in the Brussels area (+/-20 km). Belgian Bus Sales is your ideal partner for the buying and selling of used buses and has a large parking area that serves as a showroom. We always have a large number of buses of all brands, capacities, models, and in every price range in stock. We can find the right tourist, school, or regular service bus for you, tailored to your needs or your budget. All information is provided without guarantee. Errors, prior sale, and typos excepted. Opening hours for viewing the used buses: Mon-Fri: 08:30 - 12:00, 12:30 - 17:00. (Mowimy po Polsku Agata) We speak your language: Dutch, French, English, Spanish, Portuguese, Italian, Russian, Polish, and more.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser source manufacturer: MAX Photonics, laser power: 6,000 W, laser wavelength: 1,080 nm, sheet thickness steel (max.): 30 mm, sheet thickness stainless steel (max.): 15 mm, sheet thickness aluminum (max.): 12 mm, travel distance X-axis: 3,050 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 120 mm, input voltage: 400 V, type of cooling: water, overall weight: 5,000 kg, door opening width: 3,000 mm, door opening height: 600 mm, Equipment: CE marking, cabin, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, New laser cutting machine with 6kW fiber laser Delivery time approx. 6-8 weeks Our aim is to offer highly precise, long-term stable, and yet affordable laser machines. Our machines are ideal for workshops and repair shops. A perfectly developed cutting parameter library is included in the scope of delivery, as is first-class service. - Machine without automatic exchange table! Loading takes place on the long side of the machine. - Very space-saving - Extremely energy-efficient cutting system - Requires only approx. 4 x 4.5 meters of floor space - 6kW laser source from MaxPhotonics (G5/European version) - Laser generator with socket efficiency better than 30% - Suitable for aluminum - Top quality, arrange a viewing now! Cutting of steel sheet up to 30mm (maximum) Cutting of stainless steel sheet up to 15mm (maximum) Cutting of aluminum sheet up to 12mm (maximum) Cutting of brass sheet up to 8mm (maximum) - Travel range 1500 x 3000mm (for large format) - Machine control in German - Safety light curtain for maximum operator protection - Extensive collision protection measures for the cutting head - Large laser protection windows for observing the cutting process - Comprehensive cutting parameter file - Incl. housing module - Very easy to operate. - Powerful laser chiller - Machine control in German - German service and spare parts supply - Powerful laser chiller - Filter extraction system available as an option (5.5kW with frequency inverter for pleasantly quiet operation) Leasing or hire purchase is possible via our financing partner Sales are exclusively to commercial businesses. Delivery / Consultation / Sales only in Germany / Austria / Switzerland Machine dimensions approx.: Tedpsxw T Nkjfx Abtsb Length: 4.0m Height: 2.3m Width: 4.5m Total weight: approx. 4500kg Do you need a different laser power, table shape, or table size? No problem. I will gladly prepare a suitable offer for you. For example, a 2kW machine from 29,990 euros. Are you unsure which laser power is suitable for your application? Of course, I will carry out cutting tests according to your requirements. A lot is possible here.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, year of last overhaul: 2024, Equipment: documentation/manual, Original Japanese line for the production of cardboard books. 16 gluing stations, presses, transfers, cover attachment, three-knife, corner rounding. Capacity up to 5,000 cardboard books per hour Special cardboard folding machines included Tjdpfxjwfr Udj Abtob

Condition: excellent (used), LINE (year 2024) for transporting, assembling and pressing furniture carcasses. Composed by: A) Motorised belt for transporting and assembling furniture (length mm 2500) B) Clamping Pressing machine Mod. WEPRESS TWIN EP 8. 2, with motorised belt conveyor, furniture diemensions - Min/Max length: mm 250 /2500 - Min/Max depth: mm 300 /820 - Min/Max height: mm 250 / 1200 C) Turning device (0°-180°) Automatic (motorised belt) length mm 1800 + flaps D) Motorised conveyor belt (length mm 2500) E) Motorised conveyor belt (slow speed) length mm 7000, for insertion of drawers, corners (protections), cartons (packaging) F) Motorised conveyor belt (length mm 5000) G) Motorised conveyor belt (length mm 2500) H) System Mod. SILVERPACK 150 LIGHT - S self-dimensioning system for automatic closing (lower and upper) of cardboard boxes. Complete with lower and upper, self-adjusting (with adhesive tape) TAPER. Maximum useful dimensions (external box) mm 1530 x 820 x 1350 (H) and Minimum useful dimensions (external box) mm 300 x 160 x 160 (H) I) 90° Transfer (with rollers and 6 belts) for the outfeed of packed products (mm 1600 x 850 x 700H) L) Inclined conveyor with idle rollers for the accumulation of packed furniture (mm 6000 x 800 x 450H) Tedpfx Ajwcn Hdobtjb

Condition: excellent (used), AUTOMATIC Drilling and Dowels inserting LINE (2 machines): W12054A) THROUGH-FEED MULTI-BORER “BIESSE” Techno FDT - No. 2 through-feed motorised belts, feeding speed up to 75 m/min - No. 2 horizontal units (each with 2 drilling heads at 11 spindles each, HP 1.8 each), - No. 5 bottom vertical units (each with 2 swivelling drilling heads at various spindles, HP 2.3 ea) - No. 1 top vertical unit (with 2 swivelling drilling heads at various spindles, HP 2.3 each) - No. 5 top pressing devices - No. 2 endless screws to evacuate the wastes. Tedevnq Txopfx Abtsb With NC (software Modul Tooling System) to control, manage and run the 2 machines of this line W12054B) THROUGH-FEED MULTI-BORER & DOWELS INSERTER “BIESSE” Techno SDT - No. 2 through-feed motorised belts, feeding speed up to 75 m/min - No. 2 horizontal units (each with 8 inserting nozzles, such as Glue injectors and dowel drivers) - No. 3 bottom units (each with 2 swivelling drilling heads at various spindles, HP 2.3 each) - No. 1 top vertical unit (with 2 swivelling drilling heads at various spindles, HP 2.3 each) - No. 3 Top pressing devices - No. 2 endless screws to evacuate the wastes.

Condition: new, Year of construction: 2026, operating hours: 10 h, functionality: fully functional, machine/vehicle number: NM-FF2026, Equipment: CE marking, Frozen fish weighing dispenser integrated into the fish feeding, sorting, 10 kg weighing and packaging line. Designed for installation in the customer's premises, taking into account the dimensions and ceiling height. Multi-head dosing device MBP 14C2 EW 60. Number of heads: 14 pcs. Weighing type: weight sensors. Weighing accuracy: 0.1 – 1.5 gr. Pocket volume: 5 liters. Dosing in one cycle: max. 4000 gr. Pocket opening type: from two sides. Nominal speed: up to 180 cycles/min. Pocket drive: stepper motors. Air dehumidifier: above 0 degrees. Electricity AC 240V, 50 Hz, Consumption 1.0 kW; Equipment weight: 800 kg. Machine dimensions: 2600 x 2600 x 1450 mm (for clarification) Control: 12.1 ” touch-sensitive display. Number of programs: up to 99. Room temperature range: from 0 C to + 40 C; External vibration compensation: 4 built-in load sensors for external vibration compensation. Protection class: IP 66, condensation-resistant, completely washable Automatic zeroing: Yes. Self-diagnostics: Yes. Remote diagnostics: Yes. RCU cable. Conformity: CE. Tedov Dit Nspfx Abteb -Flow Pack type packaging machine PFM Zenith EW Servo. Equipment for forming pre-cut packages from a film roll. Packaging data: −Package width 100 - 320 mm. −Package length 80 - 400 mm. −Max. package volume 6 liters. −Max. roll width 700 mm. −Film roll diameter max. 350 mm. Mechanical speed: up to 90 cycles per minute. The actual speed will be specified after tests with real product and packaging material. THE BASIC SET OF THE MACHINE INCLUDES: The machine frame, electrical cabinet, melting jaws, vertical melter support made of stainless steel. Roll holder with centering cones. One forming tube made of stainless steel for pillow-type packaging (diameter optional). Photo sensor for printed film and encoder for determining the length of the package. Vacuum belts for film feeding. Machine version with a slope for product and packaging safety. Product holding mechanism before jaws. Packaging support. Vertical seam sealing bar with pneumatic drive. Machine functions are controlled via PLC Siemens. Photo sensor for working with printed film. Possibility to save up to 99 different programs. Machine control via touch sensitive panel 12.2". Machine self-diagnosis. Notes: The machine is designed to work with hot jaws MACHINE DIMENSIONS (base model): Height: 1600 mm. Width: 1280 mm. Depth: 2200 mm. Weight 550Kg. Air consumption: 350 NL/minute. Electricity consumption: 4 Kw. Connection: 400 V. 3 Ph. - 50 Hz. 2. Multifunctional line, in accordance with the requirements and premises of the customer. Designed for feeding fish from IFQ, sorting, accumulating in containers, as needed, weighing 10 kg, forming cardboard boxes and feeding tilted boxes to sealing and pallets. The line consists of: - c) Feed conveyor to weighing 10 kg - d) Reversible conveyor for feeding filled boxes to sealing - e) Reversible conveyor with control from scales with two weighing places - f) Roller, gravity, conveyor for feeding empty boxes to 10 kg weighing places - g) Roller conveyor for feeding empty boxes to the 1kg packing table - h) Work table for packing 1kg packages into boxes - i) Rotary table for accumulating 1kg packages - j) Product feed conveyor to the MFG - k) Conveyor for feeding products from the MFG to the packer - l) Conveyor for feeding 1kg packages to the Rotary table - m) carton former, automatic - n) carton sealer -p) Xray

Condition: good (used), Koenig Rex Futura II roll plant. In very good ex bakery condition. Photos show machinery whilst in storage and before cleaning. Better photos will follow. Tsdpfx Asvth Auebtob

Condition: good (used), Year of construction: 2001, Loader with 3 units for: 1) left -> end cut with 1 saw blade 2) right –> milling or drilling 3) left and right –> sanding piece heads with continuous abrasive belt and profiled pads Sanding machine with - No. 2 upper horizontal sanding belts - No. 2 lower horizontal sanding belts - No. 2 right vertical sanding belts Tedpfx Abjvxqh Dotsb - No. 2 left vertical sanding belts - No. 2 orbital sanders - No. 2 Camam robots mod. NTTR for handling pieces - No. 2 Camam brushing heads mod. SAW 91 - Return connection belts to the operator - With cabin - CE norms Technical characteristics: • maximum length of pieces to be sanded 1,200 mm • Minimum length 380 mm (350 mm without orbital sanding) • Abrasive belt dimensions: 3,700 x 90 mm • Maximum curvature of pieces 120 mm

Condition: used, Year of construction: 1996, operating hours: 12,171 h, total width: 2,300 mm, total height: 2,400 mm, total length: 9,000 mm, Colour: Grey Empty weight: 10.000 kg BOERE sanding line 'Compact' Elite Year of construction 1996 (CE) 12171 Operating hours Maximum height 150 mm Maximum width 1300 mm Elite BKKS 1300 First generator 45kW engine Todpfx Abjwnh Eqstob Second generator 30kW engine Third generator 18.5kW engine Voltage 380V, 183Amp Elite TKKS 1100 First generator 45kW engine Second generator 30kW engine Third generator 18.5kW engine Voltage 380V, 172Amp Revised by Boere in 2019 - Year: 1996 - Documentation available: Yes - CE marking present: Yes - Bottom sander: - CE certificate present: No - Serial number: 98015305 - Operating hours: 12171 - Max. working width [mm]: 1300 - Max. working height [mm]: 150 - Sanding belt length [mm]: 1900 - Sanding belt width [mm]: 1310 - Motor power first unit [kW]: 45 - Motor power second unit [kW]: 30 - Motor power third unit [kW]: 18.5 - Feed motor [kW]: 2.2 - Number of contact rollers [pcs.]: 2 - Number of combi units [pcs.]: 1 - Number of steel rollers [pcs.]: 2 - Number of motors [pcs.]: 3 - Belt blow-off system present: Yes - Brush present: Yes - Sanding pad present: Yes - Segments present: Yes - Top sander: - Max. working width [mm]: 1300 - Max. working height [mm]: 150 - Sanding belt length [mm]: 1900 - Sanding belt width [mm]: 1310 - Motor power first unit [kW]: 45 - Motor power second unit [kW]: 30 - Motor power third unit [kW]: 18.5 - Feed motor [kW]: 2.2 - Number of contact rollers [pcs.]: 2 - Number of combi units [pcs.]: 1 - Number of steel rollers [pcs.]: 2 - Number of motors [pcs.]: 3 - Belt blow-off system present: Yes - Structuring brush present: No - Brush present: Yes - Sanding pad present: Yes - Segments present: Yes - Voltage [V]: 380 - Current consumption [A]: 172 - Transport dimensions: 9000mm x 2300mm x 2400mm (l x w x h) - Transport weight [kg]: 10000kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser source manufacturer: Max Photonics, laser power: 3,000 W, laser wavelength: 1,080 nm, sheet thickness steel (max.): 22 mm, sheet thickness stainless steel (max.): 12 mm, sheet thickness aluminum (max.): 12 mm, table width: 1,300 mm, travel distance X-axis: 2,550 mm, travel distance Y-axis: 1,260 mm, travel distance Z-axis: 120 mm, input voltage: 400 V, type of cooling: water, overall weight: 3,500 kg, door opening width: 2,600 mm, door opening height: 1,000 mm, Equipment: CE marking, cabin, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, new laser cutting machine with 3kW fiber laser Our goal is to offer high-precision, long-term stable, and yet affordable laser machines. Our machines are ideal for workshops and repair businesses. A perfectly developed cutting parameter library is included, as is first-class service. Please also take note of our attractive leasing and hire-purchase offers. - Machine without automatic shuttle table - Very space-saving design - Extremely energy-efficient cutting system - Only about 4 x 4 meters installation area required - 3kW laser source from MaxPhotonics (G5/German configuration) – suitable for aluminum - Top quality, schedule a viewing now! Cutting capacities: - Mild steel up to 22mm - Stainless steel up to 12mm - Aluminum up to 12mm - Brass up to 5mm - Travel range: 1260 x 2550mm (suitable for medium-size sheets) - Machine control interface in German - Safety light curtain for maximum operator protection - Extensive collision protection for the cutting head - Large laser protection window for process observation - 3-gas selection (compressed air, nitrogen, oxygen) - Extensive cutting parameters library - Including nesting module - Very easy to operate - Powerful laser chiller - German service and spare parts availability - Extraction/filter system optionally available (5.5kW with frequency converter for exceptionally quiet operation) Leasing and hire-purchase available via our financing partner Sale exclusively to commercial customers. Delivery / consulting / sales only in Germany / Austria / Switzerland. Machine dimensions approx.: Length: 4.0m Height: 2.3m Width: 4.0m Total weight: approx. 3500kg Need different laser power, table configuration, or table size? No problem. I am happy to prepare a tailored offer. Tjdpexa Ahnofx Abtsb Example: 2kW machine from €29,990 Not sure which laser power is right for your application? Of course, I can perform cutting trials according to your requirements. There is a wide range of possibilities.

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, WORKING DIMENSION 250x150 mm MILLING MOTOR 50 HP HYDRAULIC POWER UNIT MOTOR 20 HP PUSHING FORCE 40T MAXIMUM WORKING SECTION 250x150 mm EXIT ROLLER CONVEYOR NOT INCLUDED Tjdpfxjw E Etys Abtsb

Condition: used, Year of construction: 2006, functionality: unexamined, SANDING LINE COMPOSED OF 3 MACHINES: LOWER WITH TWO PAD BELTS; UPPER WITH TWO PAD BELTS; LATERAL WITH ONE BELT AND TWO EDGE SANDING BELTS. FOR BEAMS UP TO 800x300 mm. INCLUDING INFEED AND OUTFEED ROLLER CONVEYORS. TOTAL POWER 34 kW. Todpfx Aew E Eu Rsbtjb

Condition: refurbished (used), Year of construction: 2007, The PDFD joining line, in its single-milling version, consists of two main units: a milling and tenoning machine, DFC 60M (where the tenons on the strip ends are machined), and a length joining press, PHSL, where the elements are joined into a strip with a length of up to 6.6 meters. Input package width for the milling and tenoning machine – 650 mm Width of glued elements – 30 ÷ 155 mm Todpfxsw Hrm Ne Abtob Length of glued elements – 170 ÷ 900 mm Thickness of glued elements – 20 ÷ 70 mm Compressed air consumption – 18 m³/h Working performance – cycles/min – approx. 2 (strip 6600) Length of the glued element – up to 5500 mm The machine is in excellent technical condition!

Condition: excellent (used), Year of construction: 2018, Biscuit line Capacity - 250-300kg/h Tedpfx Aow Nxvuebtsb Year - 2018 Dough mixer 100kg batch, Biscuit rotary moulder 800mm width, Tunnel oven, wire mesh belt 500mm width, 18m baking zone, 1.5m inlet conveyer and 1.5m outlet conveyer, total 21m, electric, 4 temperature controlled zones with separate control for upper and lower zone, automatic controlled tracking of the belt

Condition: excellent (used), CNC Flexible Automatic through-feed ROUTERING, DRILLING and DOWELS INSERTING LINE Min/Max workpieces (panels) width (X axis) with FTT: mm 240 / 3100 Min/Max workpieces (panels) thickness (Z axis) with FTT: mm 12 / 60 Min/Max workpieces (panels) length-depth (Y axis) with FTT: mm 140 /1550 (or 800+800) A) Motorized Roller table "RBO" with 90° conveyoring belts B) Gantry (Portal) CNC (Routering and Drilling) machine "BIESSE" FTT 800 slot A: No. 2 vertical Electro-spindles ISO 30 (Kw 4.5 each) with 2 tool-holder stores 3 places each (tot. 6) slot B: No. 2 predispositions for the installation of other 2 electro-spindles No. 4 upper drilling units (4x32 = total 128 vertical spindles + 4x4= tot. 16 horizontal spindles in Y-axis) No. 2 drilling spindles stores/magazines (revolver) with 60 positions each (total 120) C) Connection system, with up-side-down turning machine (180°) "RBO" Mod. Ribaltatore D) Gantry (Portal) CNC (Routering and Drilling) machine "BIESSE" Mod. FTT 800 R8 No.2 horizontal units (1 left+1 right) with 4x BH18 heads with 18 spindles each (36 right + 36 left) total 72 slot A: No. 2 vertical Electro-spindles ISO 30 (Kw 4.5 each) with 2 tool-holder stores 3 places each (tot. 6) Todpfxjyhqa Ao Abteb slot B: No. 2 predispositions for the installation of other 2 electro-spindles No. 4 upper drilling units (4x32 = total 128 vertical spindles + 4x4= tot. 16 horizontal spindles in Y-axis) No. 2 drilling spindles stores/magazines (revolver) with 60 positions each (total 120) E) "BIESSE" RD dowels insertion machine No.2 horizontal units (1 right+1 left) with 5 insertion nozzles each (5 left + 5 right), total 10 nozzles F) Brush-cleaning machine "WANDRES"