Used Tubular Film for sale (1,588)

Condition: good (used), Year of construction: 2014, operating hours: 7,145 h, functionality: fully functional, Baler Presto HPK 50 HS, Year of Manufacture 2014 Manufacturer: Presto Model: HPK 50 HS Year of Manufacture: 2014 Drive: 30 kW Pressing Force: 50 t Operating Hours: 7145 Filling Opening: 1600 x 650 mm (L x W) Hfedox Uzzxjpfx Adwob Channel Cross Section: 700 x 950 mm Maximum Filling Volume: 1.06 m³ Cycle Time: 20 s Tying: 4-fold Throughput Capacity at 35 kg/m³: 5.5 t/h 60 kg/m³: 8.8 t/h 100 kg/m³: 12.7 t/h Bale Weight: up to 500 kg Machine Dimensions: 8420 x 1900 x 2400 mm (L x W x H) Machine Weight: approx. 10,500 kg Materials: Paper, Cardboard, Film, PET Bottles Remarks: Blades and counter-blades as well as all sliding plastics have been replaced. The baler is in good condition and has been inspected and tested. A video is available on our website or YouTube channel. Operating manuals and CE declaration are available. Inspections, including under power, are possible by appointment at any time. Upon request, we also conduct tests with your material for a handling fee. We are happy to answer any questions about the machine by phone from Monday to Thursday from 08:00 to 14:00. On Fridays, we are available from 08:00 to 13:00. Please note: All technical data is based on manufacturer’s specifications. We assume no liability for the information provided or for any potential errors. The offer is non-binding and subject to prior sale and revocation at any time. Viewings are possible by arrangement. Sale is ex works against advance payment, without warranty or guarantee.

Condition: used, Year of construction: 2018, rotor diameter: 368 mm, rotor width: 1,500 mm, No. 10027 Single-shaft shredder AMIS / WEIMA WT 15 Used, year of construction 2018, approx. 250 operating hours According to our customer, the machine is fully functional and can be viewed and tested on site Single-shaft shredder for cables, plastics & recycling Hfedpfjxwdiuex Adweb Feed opening 1500 x 1160 mm LW Rotor width 1500 mm Rotor diameter 368 mm Rotor speed approx. 90 rpm Motor output 90 kW System output 99 kW Power consumption 210 A Voltage 400 V / 50 Hz PLC control Siemens SIMATIC Built-in screen with 20 mm screen hole diameter Replacement screen with 50 mm screen hole diameter The high-performance shredder in the WT series is ideal for processing a wide variety of plastics - especially difficult, flexible materials such as films, filaments, big bags, tapes, carpets, textiles, foams and all loose and non-bulky waste materials. The WING-RAM swing arm ensures that even contaminated or moist material is fed safely. Incl. angled conveyor belt / discharge belt AMIS FB 7000 x 1500 x 580 / year of construction 2018 / 1.5 kW Incl. magnetic separator AMIS Installation dimensions approx. 9000 x 3500 x 3950 mm LWH Transport dimensions single-shaft shredder approx. 3000 x 2700 x 3200 mm LWH Weight approx. 12500 kg Sale on behalf of customer, ex location near 69123 Heidelberg, without dismantling, without transport and assembly Dismantling, transport and loading by us optionally possible Errors in description and price excepted To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Condition: new, Year of construction: 2026, Various augers Hfsdpor Ezpvefx Adwjb • Tubular auger Ø 10/15/20 cm • Standard auger: Ø 15/20/25/30/40/50/60/80 cm • Carbide-tooth auger: Ø 20/30/40/50/60 cm • Vineyard auger: Ø 50 cm • Planting auger: Ø 50 cm

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, feed length X-axis: 6,000 mm, feed length Y-axis: 3,210 mm, compressed air connection: 6 bar, cutting length (max.): 6,000 mm, Combi cutting table for cutting monolithic and laminated (VSG) glass. The complete line consists of an automatic crane, tilting table, a table for removing low-e film for both monolithic and VSG glass as well as for cutting monolithic glass, a VB-45 module used for cutting VSG glass, and a table for breaking off monolithic glass and removing finished pieces. Hfodpfx Adsx Tq S Djwjb

Condition: new, Electric dehumidifier/construction dryer for commercial use. For drying rooms, dehumidifying cellars, etc. and for drying e.g. concrete, masonry, plaster, screed. Refrigeration unit with rotary piston compressor and capacitor motor 230 V, 50 Hz, 1200 W, with automatic hot gas defrosting system, for continuous operation. Very quiet operation. Dehumidification capacity max. 80 l/24 h, air volume max. 850 m3/h. Electronic control unit with illuminated 3"" display and memory function. Electronic hygrostat, operating hours counter, power consumption counter. Air filter. In a sturdy sheet steel housing on a mobile tubular steel frame with large wheels. In cardboard box. Condensate container not included (see accessories below!) Dehumidification capacity: ≤ 80l/24h Hfjdeuy Thmjpfx Adwjb Air volume: ≤ 850 m³/h Super offer: When you buy a REMS Secco 80 set, you will receive 1 REMS Detect W humidity measuring device free of charge. You save an additional 233.55 euros. The offer is valid until 31.12.2024

Condition: used, Year of construction: 2012, operating hours: 31,000 h, functionality: fully functional, pressing force: 90 t, filling opening width: 940 mm, filling opening length: 1,600 mm, bale width: 1,000 mm, bale height: 800 mm, total width: 5,800 mm, total height: 5,680 mm, total length: 9,050 mm, overall weight: 16,500 kg, power: 53 kW (72.06 HP), volume flow: 190 m³/h, tank capacity: 1,500 l, Equipment: documentation/manual, The baler has been in operation since 2012 and has been primarily used for compressing paper materials, which make up approximately 85% of the total volume processed. The remaining materials include film/nylon and a small percentage of plastics. The machine has undergone regular maintenance and remains fully functional to this day. It continues to serve as our main baler in daily operations. Operating Schedule: 5 days per week, 8 hours per day Throughput: Approximately 50 tons per day In 2023, we replaced the carriage plate wheels and bearings. The pump for the pressing channel is new. Hedpex H Rmbsfx Adwjfb The machine operates under excellent pressure conditions; we consistently achieve container loads of 25 tons of compacted cartons. The tying system is fully functional and performs reliably using a 4-wire configuration. The main cylinder piston was recently replaced with a new one, installed by local technicians. Minor modifications have been made to the tying system and the spring system that prevents material expansion back into the carriage plate area. These changes are The channel is in good operational condition. Recently, the old floor was removed due to wear, and we applied a filler compound (similar to concrete) to smooth out irregularities and prepare the base for a new floor installation. This work ensures proper alignment and durability moving forward. The conveyor is in working order, with visible signs of wear on the side panels. These are cosmetic and clearly visible in the photos included in this report

Condition: good (used), Year of construction: 2019, operating hours: 1,022 h, functionality: fully functional, Baler Presto CC 20 M, year of manufacture 2019, pressing force 20 t, with retention device. Technical data: Manufacturer: Presto Model: CC 20 M Year of manufacture: 2019 Operating hours: 1022 Pressing force: 20 t Cycle time: 24 s Drive power: 7.5 kW Filling opening: 1030 x 750 mm Filling volume: 0.53 m³ Tying: 3-fold, manual Throughput capacity at bulk density of 35 kg/m³ - 1.6 t 60 kg/m³ - 2.3 t 100 kg/m³ - 2.8 t Bale dimensions: 700 x 750 mm Bale weight: up to 300 kg Dimensions: 3300 x 1235 x 1860 mm (LxWxH) Machine weight: approx. 2500 kg Materials: paper, cardboard, film Note: The machine is in good condition. It has been inspected and tested at our facility in 28816 Stuhr. You can find a video on our website or YouTube channel. Inspections, including under power, are possible at any time by appointment. Upon request, we can also conduct tests with your material for a service fee. Hfodpfex Uzynjx Adwob We are happy to answer any questions about the machine by phone from Monday to Thursday, 08:00 to 14:00. On Fridays, we are available from 08:00 to 13:00. Please note: All technical data is based on information provided by the manufacturer. We accept no liability for the information given or for any potential errors. Offers are subject to change, prior sale reserved, and may be revoked at any time. Inspections are possible by appointment. The sale is ex location, without warranty or guarantee.

Condition: new, Year of construction: 2025, A 220-liter top-loading sandblaster with telescopic cylinders is a device for sandblasting and cleaning surfaces from rust, paint, greasy deposits and other impurities. The top opening significantly improves the ergonomics of working with heavy details. It is standardly equipped with a set of nozzles, a gun and glass protection stickers. A sandblaster is an essential tool in the metal, automotive, construction and shipbuilding industries. Thanks to its capacity and the stream of sand to the type of surface, the sandblaster ensures quick and effective cleaning of surfaces. Hfsdpfx Adsvzqf Uewob The KDP220TOP sandblaster is a top quality product. It provides users with long and reliable work, and what is more, it enables quick and effective cleaning of surfaces of various types of elements. Equipped with an upper opening on telescopic actuators, it significantly improves work ergonomics and makes it easier to load heavy elements, and the capacity of 220 liters enables effective cleaning of larger surfaces in a short time. Advantages of our sandblaster model Complete for immediate use Convenient sandblasting gun with 4 replaceable ceramic nozzles Large, stable front door with rubber seal around the perimeter for safe and dust-free operation Telescopic actuators for increased work comfort High-quality rubber gloves integrated with the device Vent connection Efficient lighting of the workspace 4 pieces of replaceable protective film for the window, visor Sand blasting hose placed at the bottom of the collection container Adapted to work with various abrasives Drain hole allows for quick change of blasting material Ease of use, reliability and work safety Technical parameters Technical parameters of KDP220TOP AIR REQUIREMENTS 400-700 L/min ALLOWABLE PRESSURE 8 BAR AIR CONNECTION 1/4" quick connector ABRASIVE TANK CAPACITY +/- 18kg SUCTION CONNECTION (venting) 63mm VIEWFINDER AREA 540x250mm FRONT HEIGHT 370mm INTERIOR CABIN DIMENSIONS (LxWxH min-max) 840x550x370-550mm EXTERNAL DIMENSIONS OF THE CABIN (LxWxH min-max) 890x560x1118-1380 mm WEIGHT 49kg Technical parameters Technical parameters of the extraction unit MODEL DC23 TENSION 220V POWER 1200W UNDERPRESSURE >12Kpa INPUT DIAMETER 45mm CAPACITY ~16l Standard equipment Work area lighting - 12 V fluorescent lamp with 230 V power supply with switch 2 high-quality rubber work gloves, integrated with the device 2 suction (venting) connections with a diameter of 63 mm and 90 mm, enabling the connection of a suction device Sandblasting gun with 4 replaceable ceramic nozzles in sizes: 4, 5, 6, 7 mm 4 pcs. of replaceable protective film for window, visor Upper door with rubber seals around the perimeter to ensure dust-free operation Stable grid on the processing field Instructions in Polish Dust Extractor DC23 Connecting hose approx. 2m Bag filter We kindly inform you that the device requires self-assembly. Manufacturer: Cormak

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, pressing force: 40 t, bale weight: 350 kg, HSM HL 4010 Re / Li horizontal baler. Equipped with a loading tipper for the basket. Manufactured in 2015. Very good condition - regularly serviced by an authorized service center. Ready for use. Available for binding with wire, string, or polypropylene tape. Semi-automatic baler system with a 40-ton pressure for economical volume reduction of residual (recyclable) materials in industry and retail: Hfjdpfx Ajx Rbtgedwjb Cardboard Tetra packs Films Foams PET bottles Insulation mats and other compressible materials. Press force: 400 kN Transport width: 1,767 m Transport height: 2,489 m Transport length: 5,573 m Weight: 4,500 kg Drive power: 7.5 kW Bale weight (depending on material): 300-350 kg Bale length x width x height: 750 x 1200 x 750

Condition: used, Technical details: Pressure: Hebelkraft t throat: 115 mm work stroke: 15 mm work height max.: 1050 mm weight of the machine ca.: 55 kg dimensions L x W x H: 780 x 300 x 1360 mm AS GOOD AS NEW Conventional riveting machine, bolted steel casting with welded construction. Application for: rivet connections e.g. tubular rivets machining further details of the machine: - stamp holder Ø 11,5 x 15mm - ram Ø 25mm - distance 70mm - Countersink: Drill diamter Ø 11.5 mm continuous, intake is currently mold piece operation is via a foot lever with return spring size of the base plate L: 380 x W: 300 mm with 4 drill holes Hsdevc Au Repfx Adwefb *

Condition: used, • Front side: 2 boxes for the films • 2 flaps for vacuum • Dimensions: W 2,450 x L 3,000 x H 2,650 mm • For production of double mirrors or laminated glass Hodpfx Adjwc Abvowofb • Price on request

Condition: good (used), Tubular heater, heating tape, heating sleeve, mica heater, cylinder heater, heating cylinder, ceramic heating tape -Manufacturer: Erge, heating tape, heating sleeve -Type: 80/82 Ø 75 -Item No.: 129 069 -Heating power: 1000 W -Voltage: 220 V -Quantity: 1x heating cable included Hfsdpfx Adox Sdu Aswob -Transport dimensions: 250/160/H80 mm -Weight: 1.2 kg

Condition: good (used), Year of construction: 2017, operating hours: 1,640 h, functionality: fully functional, Baler Presto CC 40 M Technical specifications: Manufacturer: Presto Model: CC 40 M Year of manufacture: 2017 Pressing force: 40 t Cycle time: 34 s Drive power: 15 kW Feed opening: 1080 x 1100 mm Feed volume: 0.85 m³ Tying: 4-fold, polyester strapping, manual Throughput at bulk density of 35 kg/m³ – 1.8 t/h 60 kg/m³ – 2.5 t/h 100 kg/m³ – 3.1 t/h Bale dimensions: 750 x 1100 mm Bale weight: 400 kg Dimensions: 3650 x 1590 x 2010 mm (LxWxH) Machine weight: approx. 3800 kg Materials: Paper, cardboard, film The baler is in good condition. It has been inspected and tested by us. A video is available on our website or YouTube channel. The operating manual and CE declaration are available. Note: Channel exit is fully automatic and self-regulating. Inspections, including powered demonstrations, are possible at any time by prior arrangement. Upon request, we can also perform tests with your material for a nominal fee. If you have any questions about the machine, we are happy to assist you by phone from Monday to Thursday between 08:00 and 14:00, and Friday from 08:00 to 13:00. Please note: All technical data are based on manufacturer information. We do not assume any liability for the supplied information or possible errors. This offer is subject to change, prior sale excepted, and may be withdrawn at any time. Inspections are available by appointment. Hodpfx Ajx Uzxkedwefb Sale is ex works, advance payment required, without warranty or guarantee.

Condition: new, Year of construction: 2025, functionality: fully functional, A sandblaster connected to a compressor is an ideal solution for quick, accurate and effective cleaning of various surfaces, eg removing rust, paint, sludge from metal surfaces, such as: automotive parts, engines, fittings, casings, wheels, rims, hinges, etc. As abrasive can be used, among others: sand made of plastic, corundum, quartz, glass, etc. The sandblaster we propose is very well equipped and prepared for work. Machine description The machine is equipped with a proven control system, a solid and roomy chamber with side doors, a solid sandblasting gun, four ceramic nozzles, high-quality work gloves, workspace lighting, a large window - a viewfinder (without a blind spot). The recommended device is provided in addition to a compact construction and a large and spacious workspace, ease of use, reliability and work safety. Dust-free operation of the device is ensured by the use of perimeter gaskets, which allows you to perform work in an environmentally friendly way. The blasting hose was placed in the bottom of the collecting container. The drain hole allows a quick change of material for sandblasting. The advantages of our sandblaster model Complete for use Comfortable sandblasting gun with 4 interchangeable ceramic nozzles Large, stable side door with rubber perimeter gasket for safe and dust-free operation High-quality rubber gloves integrated with the device Venting connection Efficient lighting of the working space 4 pieces of removable protective film for the window, viewfinder Sanding hose located in the bottom of the collecting container Adapted to work with various abrasives The drain hole allows a quick change of material for sandblasting Ease of use, reliability and work safety Technical data Workspace dimension 840x550x370-550 mm Air consumption 400-700 L/min Required air pressure 2,75 - 5,5 BAR Arm hole opening 180 Air connection 1/4" Weight 49 kg We kindly inform you that the device requires self-assembly. Hodpfx Adsrh Erxowefb The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, pressing force: 80 t, DIXI 80 SLD horizontal press Semi-automatic press system with 80 tons of pressure for economical volume reduction of residual materials (recyclable) in industry and retail: Cardboard Tetra packs Films Foams PET bottles Insulating mats and other compressible materials. Pressure force : 80 t Electrical connection : 400 V 50 Hz; 11 kW; D-32 A (option: K-32 A) Cycle – average approx. : 35 sec Length approx. : 4,320 mm (without lifting device and pallet) Width approx. : 1,830 mm Height approx. : 2,620 mm (with hopper) Loading opening (WxD) – housing : 1,040 x 1,110 mm Bale dimensions : 1,120 x 1,120 x 1,200 mm Bale weight approx. : 500 – 600 kg Tying 4 manual, wires with quick-release eyelets Hfedpfxsx Sqlne Adwsb Machine weight approx. 8,000 kg (without bale)

Condition: good (used), Tubular heater, heating tape, heating sleeve, mica heater, cylinder heater, heating cylinder, ceramic heating tape Hfodex Sdt Ejpfx Adwjb -Manufacturer: Erge, heating tape, heating sleeve -Type: Ø100 x 80 mm -Item No.: 832 393 65 -Heating power: 1040 W -Voltage: 220 V -Quantity: 1x heating cable included -Transport dimensions: 170/160/H80 mm -Weight: 1.2 kg

Condition: new, Year of construction: 2025, The front-opening sandblasting booth is a significant convenience for large and heavy workpieces. Telescopic actuators mounted in the door facilitate opening. As a standard, the sandblaster has a built-in dust extractor generated during sandblasting. Equipped with a set of nozzles, a gun and protective stickers for the visor. Machine description Dust-free operation of the device is ensured by the use of circumferential gaskets, which allows you to perform work in an environmentally friendly manner. The sandblasting hose is placed in the lower part of the collection container. Drain hole allows quick change of blasting material. The sand blaster is used for cleaning and processing various types of surfaces, e.g. removing rust, paint, deposits from metal surfaces, e.g. automotive parts, engines, fittings, housings, wheels, rims, etc. The following can be used as an abrasive: , silicon, glass beads, plastic sand, emery and other materials. KDP350TOP technical parameters WORKING CAPACITY 330L (0.33m3) OPERATING PRESSURE 4 - 8 bar AIR CONSUMPTION 400 - 700 l/min AIR CONNECTION 1/4" (INCH) QUICK RELEASE VIEW AREA 580x270mm DRAIN CONNECTION fi 63mm and 90mm CAB INTERNAL DIMENSIONS (Width x Depth x Height lowest/highest point) 890 x 655 x 360/610 mm DIMENSIONS 960x720x1500mm WEIGHT 64 kg Standard equipment DC15 cyclone exhaust Working field lighting - 12 V fluorescent lamp with 230 V power supply with switch 2 high-quality work gloves made of rubber, integrated with the device 2 suction (vent) connections with a diameter of 64 mm and 90 mm for connecting a suction device Sand blasting gun with eight replaceable ceramic nozzles 4 pieces of replaceable protective film for the window, viewfinder front door with rubber perimeter seals for dust-free operation Manual in Polish We kindly inform you that the device requires self-assembly. Hfodpfx Aem Ncb Eedwob We kindly inform you that the device requires self-assembly. The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, pressing force: 80 t, bale weight: 600 kg, DIXI 80 SLS horizontal press Semi-automatic press system with 80 tons of pressure for economical volume reduction of residual materials (recyclable) in industry and retail: Cardboard Tetra packs Films Hsdpjx Rbuqefx Adwefb Foams PET bottles Insulating mats and other compressible materials. Pressure force : 80 t Electrical connection : 400 V 50 Hz; 11 kW; D-32 A (option: K-32 A) Cycle – average approx. : 35 sec Length approx. : 4,320 mm (without lifting device and pallet) Width approx. : 1,830 mm Height approx. : 2,620 mm (with hopper) Loading opening (WxD) – housing : 1,040 x 1,110 mm Bale dimensions : 1,120 x 1,120 x 1,200 mm Bale weight approx. : 500 – 600 kg Tying 4 manual, wires with quick-release eyelets Machine weight approx. 8,000 kg (without bale)

Condition: new, Year of construction: 2025, KDP350 Cabinet Sandblaster is an efficient surface treatment and cleaning machine for metal components, designed for professional workshops, industrial facilities, and refurbishment services. The 330-liter working chamber and two side doors with full-seal gaskets ensure convenient access and dust-free operation. The set includes a DC15 cyclone dust extractor, which effectively removes dust generated during operation. This unit is ideal for sandblasting wheels and other metal parts requiring precise cleaning. Key Features of the KDP350 Sandblaster Large working chamber – 330 liters capacity allows processing of larger components. Two side doors – on the right and left sides for easy loading and part handling. Dust-free operation – thanks to sealing gaskets and extraction ports (63 mm and 90 mm). Gun with ceramic nozzles – includes 4 interchangeable tips (4, 5, 6, 7 mm) for precise blasting. Illuminated work area – improves visibility and accuracy during operation. Integrated gloves – abrasion-resistant and protect the operator’s hands. Compatible with various abrasives – such as quartz sand, glass beads, silicon carbide, emery, and plastic granules. Standard Equipment DC15 cyclone dust extractor with filter and hose 12V fluorescent lamp (powered by 230V, with switch) 2 integrated rubber gloves Blasting gun with 4 ceramic nozzles (sizes: 4, 5, 6, 7 mm) Hodpsw H N R Ssfx Adwsfb 4 protective films for the viewing window 2 dust extraction ports: 63 mm and 90 mm diameter 2 side doors with full-circuit sealing User manual in Polish Technical Specifications of the KDP350 Sandblaster Specification Value Working capacity 330 L (0.33 m³) Operating pressure 4 - 8 bar Air consumption 400 - 700 l/min Air inlet 1/4" quick coupling Viewing window area 580 x 270 mm Doors 2 pcs (left and right sides) Dust extraction ports Ø63 mm and Ø90 mm Internal dimensions 890 x 655 x 360/610 mm External dimensions 960 x 720 x 1500 mm Weight 88 kg Note: The machine is delivered in parts and requires self-assembly according to the included manual.

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, pressing force: 12 t, bale length: 1,200 mm, bale width: 700 mm, bale height: 500 mm, bale weight: 450 kg, total length: 5,500 mm, Equipment: documentation/manual, The machine is in very good condition and regularly serviced. Manufactured in 1994, it was purchased from the original owner and is ready for use. The baler is started manually by a button or fully automatically using a photocell in the loading chute. Cutting blades mounted on the pressure plate cut the material and compress it in the baling channel. Once the desired length is reached (bale length adjustment is available), the bale is automatically tied after several baling cycles. The bale can be tied with wire, twine, or polypropylene tape. Automatic baling system with a 12-ton pressure for economical volume reduction of residual (recyclable) materials in industry and retail: Cardboard Tetra packs Films Foams PET bottles Insulation mats and other compressible materials. Baling pressure: 120 kN Bale size: 700 x 500 x 600 - 1200 mm Hfodpfox Ihqajx Adwjb Bale weight (depending on material): 280-450 kg Transport length: 5.5 m Weight: 3500 kg Drive power: 7.5 kW Transport costs depend on weight, volume, and, above all, distance. The following information is important for inquiries: Delivery address (postal code and city name), but further details require a phone call. Therefore, please inquire about transport costs and other delivery methods by calling us.

Condition: new, Year of construction: 2025, Reliability confirmed by our customers dealing with large orders every day. Pollutants from the filter fall directly into an airtight bag with quick discharge. Designed for the filtration of primarily chips and dust with very fine granulation in the woodworking and furniture industry. Advantages of Cleaning quality guaranteed! space-saving yet capable of extracting large quantities of dust and chips trouble-free operation confirmed by production facilities dealing with large orders on a daily basis Robust, vibration-free hardened construction for maintenance-free operation! dynamically balanced metal rotor to reduce noise levels metal intake nozzle with a diameter of 200 mm allows for a much higher air flow!!! possibility to build a ceiling system and feed several machines working simultaneously with the DCV ECO extraction units large filter surface area! have a special blade design, which makes them more efficient and effective, as well as contributing to energy savings very high tightness of the entire extraction system, guaranteeing the best quality of air inside the plant and, during the heating period, no loss of heat quick change of film containers designed to keep the system 99.99% airtight. The DCV 4500E is the next step in the production of efficient sawdust extraction, with the aim of constantly ensuring the same extraction performance throughout the entire extraction cycle. This type of extraction will ensure perfection and cleanliness at the workplace, which will have a direct effect on the quality of your products. Perfectly compatible with the following machines: sanding machines, format saws, veneering machines, panel saws, etc. It is forbidden to use this extraction in explosive atmospheres The extraction is used for working in the carpentry industry with sawdust, shavings, dust (it is not suitable for working with wet material such as wet sawdust) polyester filter retains dust with a diameter of up to 5 microns, for the filtration of smaller particles it is necessary to use a filter such as HEPA Technical parameters CONTINUOUS DUTY MOTOR POWER S1 3.0 kW / 400 V, 50 Hz RPM 2900 rpm SUCTION OUTPUT 4500 m3/h SUCTION NOZZLE DIAMETER 200 mm SUCTION VELOCITY 28-32 m/s Hsdpfouc Uchex Adwofb FILTER AREA 170 x 1035 mm FILTER MATERIAL Polyester, 5 micron NUMBER OF FILTERS 12 DIMENSIONS 1530 x 665 x 2200 mm WEIGHT 120 kg

Condition: new, Year of construction: 2025, Pallet Wrapping Machine for 1200x1000 mm Pallets – 2000 kg Capacity The pallet wrapping machine for 1200x1000 mm pallets with a load capacity of 2000 kg is a universal and cost-effective solution for companies looking to increase the efficiency of their packaging processes. This device combines high build quality, ease of use, and operational safety. It performs excellently across various industries – from food processing and manufacturing to logistics and e-commerce. 1650 mm Turntable Wrapper – Designed for Industrial Pallets and Heavy Loads Thanks to its 1650 mm turntable diameter, the wrapper is suitable for larger industrial pallets (1200x1000 mm) and non-standard loads with a wider base. It is ideal for use in: Manufacturing plants and heavy industry Shipping and transportation companies Logistics centers and wholesale operations Food, chemical, and metal industries High-bay warehouses With a high load capacity of 2000 kg, the machine can handle both lightweight carton pallets and heavy goods placed in crates, barrels, or industrial containers. Key Advantages of the 1200x1000 mm Pallet Wrapper ✅ High Load Capacity – up to 2000 kg Allows wrapping of heavy loads without the risk of damaging the turntable. ✅ 1650 mm Turntable Diameter Ideal for larger industrial pallets and wide-based loads. ✅ Versatile Use Compatible with EURO pallets, industrial pallets, and non-standard formats. ✅ Stretch Film Savings Precise film tensioning reduces consumption and lowers packaging costs. ✅ Film Compatibility Works with both black stretch film (for content concealment) and transparent film (for product visibility). ✅ User-Friendly Operation Intuitive control panel with adjustable rotation speed and number of wrap layers. ✅ Durable Construction Reinforced mast and turntable ensure long service life, even under heavy-duty use. 1650 mm Stretch Wrapper – Alternative Names & Practical Benefits This machine is also commonly referred to as: Industrial pallet stretch wrapper Pallet packing machine 1650 mm automatic wrapper Hsdpfexnmnnsx Adwsfb Large turntable pallet wrapper Heavy-duty load wrapping machine Regardless of the name, all serve the same purpose – effectively securing pallets and goods against damage during transportation.

Condition: new, Year of construction: 2025, The DCV8900E+ professional industrial extraction unit has been designed for the most demanding working environments. It is a high-performance unit designed to remove sawdust, dust and shavings from carpentry machines, guaranteeing continuous extraction performance throughout the production cycle. Thanks to its compact design and high suction power, the central extraction unit is suitable both as a stand-alone unit and as part of a multi-point extraction system. Technical data Motor power S1 7.5 kW / 400 V, 50 Hz Motor speed 3000 rpm Hjdpfx Adswwq Ndswofb Extraction capacity 8900 m³/h Suction nozzle diameter 300 mm Suction speed 32 m/s Number of filters 45 Filter material Polyester (5 microns) Filter area 20 m² Dimensions (L x W x H) 2400 x 1170 x 2240 mm Weight 500 kg Standard equipment 45 polyester filters (5 microns) metal rotor and rotor housing hermetic film containers integrated filter cleaning system

Condition: new, Year of construction: 2025, The sandblasting cabin is a device used in industry, car workshops and renovation works. It is used to remove surface layers from various materials, such as metal, wood or glass. The cabin has side openings and telescopic cylinders, which allows the processing of long workpieces. The standard equipment includes a dust extraction system, a set of nozzles, a gun and protective stickers for the visor. Thanks to it, you can effectively and precisely remove surface layers from various materials. Product characteristics: The 350 liter top opening sandblaster for KDP350TOPPLUS profiles is a specialized, reliable and professional tool that will ensure precise and effective cleaning and treatment of metal surfaces. Its advanced solutions and high quality make it one of the best products on the market, which will surely satisfy demanding customers and ensure failure-free and safe operation. The sandblaster is a device that has been specially designed to remove surface layers from various materials. Thanks to the side openings, it allows the processing of long workpieces, which allows for even greater versatility and flexibility in use. Telescopic cylinders are installed in the cabin door, which makes it easier to open and close, and thus increases the comfort of use. As standard, the cabin is equipped with a dust extraction system that protects against inhalation of harmful dust during operation. Thanks to this tool, work is safer and more comfortable. KDP350TOP PLUS technical parameters: WORKING CAPACITY 330L (0.33m3) OPERATING PRESSURE 4 - 8 bar AIR CONSUMPTION 400 - 700 l/min AIR CONNECTION 1/4" (INCH) QUICK RELEASE VIEW AREA 580x270mm SIDE OPENING DIMENSIONS 200 x 180mm DRAIN CONNECTION fi 63mm and 90mm CAB INTERNAL DIMENSIONS (Width x Depth x Height lowest/highest point) 890 x 655 x 360/610 mm DIMENSIONS 960x720x1500mm WEIGHT 64 kg Standard equipment DC15 cyclone exhaust Foot pedal to control airflow Working field lighting - 12 V fluorescent lamp with 230 V power supply with switch 2 high-quality work gloves made of rubber, integrated with the device 2 suction (vent) connections with a diameter of 64 mm and 90 mm for connecting a suction device Sand blasting gun with eight replaceable ceramic nozzles 4 pieces of replaceable protective film for the window, viewfinder front door with rubber perimeter seals for dust-free operation Manual in English We kindly inform you that the device requires self-assembly. Hodpfx Ajm Ncciodwefb We kindly inform you that the device requires self-assembly. The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, Year of construction: 2025, The front-opening sandblasting booth is a significant convenience for large and heavy workpieces. Telescopic actuators mounted in the door facilitate opening. As a standard, the sandblaster has a built-in dust extractor generated during sandblasting. Equipped with a set of nozzles, a gun and protective stickers for the visor. Machine description Dust-free operation of the device is ensured by the use of circumferential gaskets, which allows you to perform work in an environmentally friendly manner. The sandblasting hose is placed in the lower part of the collection container. Drain hole allows quick change of blasting material. The sand blaster is used for cleaning and processing various types of surfaces, e.g. removing rust, paint, deposits from metal surfaces, e.g. automotive parts, engines, fittings, housings, wheels, rims, etc. The following can be used as an abrasive: , silicon, glass beads, plastic sand, emery and other materials. KDP450TOP technical parameters CAPACITY 450L (0.45m3) AIR CONSUMPTION 400 - 1000 l/min OPERATING PRESSURE 4 - 8 BAR AIR CONNECTION 1/4" (INCH) QUICK RELEASE VIEW AREA 580 x 270mm DRAIN CONNECTION fi 64mm and 90mm CAB INTERNAL DIMENSIONS (Width x Depth x Height lowest/highest point) 1140 x 650 x 630mm DIMENSIONS 1260 x 1000 x 1600mm Hfjdpfxjm Nccxo Adwjb WEIGHT 105 kg Standard equipment DC15 cyclone exhaust Working field lighting - 12 V fluorescent lamp with 230 V power supply with switch 2 high-quality work gloves made of rubber, integrated with the device 2 suction (vent) connections with a diameter of 64 mm and 90 mm for connecting a suction device Sand blasting gun with four replaceable ceramic nozzles 4 pieces of replaceable protective film for the window, viewfinder front door with rubber perimeter seals for dust-free operation Manual in English We kindly inform you that the device requires self-assembly. We kindly inform you that the device requires self-assembly. The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.