Used Tungsten Carbide for sale (542)

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 28464, overall weight: 2,300 kg, input voltage: 380 V, type of input current: three-phase, Equipment: documentation/manual, CAT 500 cutting center – an automatic machine designed for cutting PVC profiles using a circular saw. Numerical control with dedicated software allows for programming processing parameters, limiting the operator's tasks to loading profiles and collecting finished parts. Saw parameters: - Arbor: Ø 30 mm - Diameter: Ø 500 mm - Rotational speed: 3000 rpm - Max. saw blade thickness: 4.2 mm Technical data: - Voltage: 380–400 V AC3PE - Current: 8 A - Frequency: 50 Hz - Power: 3.8 kW - Air pressure: 7 bar - Weight: 2300 kg Standard equipment: - Tungsten carbide saw blade Ø 500 mm (arbor Ø30) - Welded frame with adjustable feet and the possibility of mounting to the floor - Industrial computer integrated with the machine - Infeed belts with inverter control and programmable acceleration/deceleration ramps - Label printer Dimensions: - Infeed: 7900 mm Prodpfx Aozvmh Rsbpja - Machine: 1000 mm - Outfeed: 2600 mm - Max. width: 2300 mm - Max. height: 1700 mm - Overall length: 11500 mm

Year of construction: 2017, condition: used, Used machine Year of manufacture: 2017 Condition: Well-maintained Equipment: Gantry milling machine High-Z S-1400T/105 (Rev. 1.5 - Facelift 2016) with ball screws Travel: 1400 x 1050 x 110 mm (X/Y/Z) Machine control Zero-3 (Rev. 1.3) for High-Z series, 5-channel, 110 - 240 Volt, 50/60 Hz Milling kit for High-Z S-1350 or S-1400T/105, additional stabilization of the Z-axis when machining very hard materials Energy arm for S-1350 and S-1400/105 Cable harness for clean routing of cables and hoses from milling motor, spray mist cooling, etc. T-slot plate on base frame for High-Z S-1400T/105 - 1790x1160mm (NL2016) 1790 x 1160 x 76mm T-slot keys, 8 pcs with bridge, M6 - 10 pcs. incl. screws M6x25 6 pcs. clamping bars 50x20x10mm M6 Base frame for combination with enclosure for S-1400T/105 - 1790x1450x900mm (NL2016) SET - Suhner milling motor UAD 30-RF / 1050W - 3,500-30,000 RPM, 230 Volt, 50/60Hz incl. 8mm and 10mm collets Collet set for Kress and Suhner (UAx-30RF) milling motors, 3.00mm / 3.175mm (1/8") / 6.00mm Milling cutter set, 10-piece (shaft 3.175mm) Wood milling cutter: 2x1mm / 2x2mm / 1x3mm Aluminum/plastic: 2x1mm / 2x2mm / 1x3mm Extraction nozzle made of aluminum for Kress or Suhner milling spindle Hose nozzle with Ø 32 and 38mm Dimensions 135x60x30mm Tangential module EOT-3, stroke 3mm Oscillating with 3mm stroke Connection cable for EOT-3 / TCM-4 for High-Z series - 5m Tungsten carbide blade type E12 - cutting edge 12mm Tungsten carbide blade type E18 - cutting edge 13.5mm EcoCam EC-4 continuous cutting pad 4mm / roll width 2m Always delivered in 2m roll width!!! 1m2 = 2 x 0.5m Tangential grooving module TCT-1 Tool holder type KR for grooving module TCT-1 for ball-bearing grooving wheels Grooving wheel B14 Grooving wheel B24 Side channel compressor Rubin 220, 1.5KW/50Hz vacuum pump incl. 3m spiral hose 40mm 230V/50Hz / 9.5A / 190mbar -190mbar / 71dB(A) Maintenance set High-Z series Grease gun + grease cartridge 400g + 100ml oil Network switch 5-port 10/100 Mbit/s + LAN cable 1m, 5x 10/100Mbps-RJ45 ports with auto negotiation Kinetic-NC control software Podjzu T Smspfx Abpora incl. CNC-Pod (LAN), network cable + USB charging cable Vacuum table VT-150100 - 1500x1000mm incl. through-milling mat and connecting hoses Location: NRW Availability: Short-term Sold on behalf of a customer! Technical data without guarantee!

Year of construction: 1960, condition: not inspected (used), Tungsten carbide chip flute grinding machine of the company Wendt type SS 50 Prsdpfx Abjhaqxbopsa

Condition: like new (used), Year of construction: 2019, operating hours: 300 h, functionality: fully functional, overall weight: 2,500 kg, rotational speed (min.): 4,500 rpm, screw diameter: 305 mm, year of last overhaul: 2026, temperature: 80 °C, empty load weight: 2,500 kg, power: 22 kW (29.91 HP), Equipment: documentation/manual, rotational speed infinitely variable, Complete Technical Data (GEA OCE 305-01-32)Technical ParameterSpecification and ValuesManufacturer & ModelGEA Westfalia Separator Group GmbH – OCE 305 SeriesEquipment TypeHigh-performance 2-phase decanter centrifuge (Solid-Liquid)Bowl Inner Diameter305 mmBowl DesignFlat-cone design with an extended length (Extended L/D ratio)Maximum Hydraulic CapacityUp to 5 m³/h (varies depending on solid concentration)Maximum Solids Density 2.6 kg/dm³Drive Type2-Gear Drive (System with 2 independent motors, no magnetic brake)Differential Speed ControlAutomatic via dedicated Variable Frequency Drives (VFD)Overall DimensionsLength: 3000 mm | Width: 1000 mm | Height: 1150 mmTotal Weight (Complete Skid)Approx. 2500 kgLubrication SystemAutomatic centralized grease lubrication for main bearingsConstruction MaterialsHigh-grade duplex stainless steel (all product-contact areas)Scroll Wear ProtectionSintered tungsten carbide tiles welded onto the flight edgesII. Liquid Discharge Under Pressure SystemUnlike standard models with gravity discharge (where the liquid falls freely into acollection tank), your model retains the clarified liquid phase inside a hydro-hermetic tripetal Pump (Paring Disk): The separated liquid flows toward the cylindrical end of the bowl, entering a special chamber where a stationary disk with spiral internal channels (a reverse turbine) is etic-to-Pressure Energy Conversion: The kinetic energy of the rapidly rotating liquid is instantly transformed into hydrostatic pressure when it hits the channels of the stationary cess Advantages: The liquid leaves the decanter directly under pressure (without requiring an external transfer pump). This prevents product foaming (highly critical for oils, chemical products, or food-grade applications) and eliminates contact with atmospheric oxygen Electrical cabinet with frequency inverters ant PLC (Siemens ) with acces code for modify the parameters , including factory documentation Pjdpfxezgq Szs Abpora

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 2426, Equipment: CE marking, Band Saw for Pallet Dismantling – VALTER BAND SAWS 1800 P-SP If you are looking for a robust and efficient industrial solution for cutting and dismantling standard or non-standard wooden pallets, this is the ideal machine. *Work Table Dimensions: 1800 x 2000 mm *Horizontal Cutting Capacity: 1500 mm *Vertical Cutting Capacity: 150 mm *Blade-to-Column Distance: 490 mm Prodpfx Ajzh Hrmsbpja *Blade Motor Power (with brake): 10 HP *Blade Speed: 400 m/min *Automatic hydraulic blade tensioner with safety limit switch *Hydraulic Oil Tank Capacity: 30 liters (1 HP pump motor) *Operating Pressure: 40 bar *Total Machine Weight: 2000 kg *Electrically welded steel structure with vertical movement via ball-recirculating linear guides for straight, uniform, and precise feed: *Micro-mist oil blade lubrication system (prepared for compressed air connection) to maximize blade life. *Tungsten carbide blade guide adjustable according to the type of pallet being processed. *Also prepared for dust extractor connection. *Dual Operator Station: Designed for safe operation with 2 operators (one for loading and one for unloading with a dedicated emergency stop button). CE CERTIFIED SAFETY The machine is equipped with advanced active and passive protection systems: *Self-braking motor that stops the blade in less than 5 seconds (3 seconds at maximum speed). *Safety microswitches in case of blade breakage or guard opening. *Electronic device against excessive motor strain. *Low-voltage controls and dual emergency stop buttons. Machine can be viewed by appointment. Price is ex-works, with transportation costs borne by the buyer.

Year of construction: 2017, condition: used, Pos.1 VEN CLEAN Smart dedusting systemCompressed air dedusting for cleaning the workpieces to be painted from dust on profiled workpiece surfaces. Five rotating blowing stars are installed. These remove the dust from the surface. The loosened dust is extracted on both sides by suction shafts. on both sides. An external extraction system is required on site. Technical data: Roller transport length: 2,060 mm Roller pitch: 85 mm Working width: 1,300 mm Total width: 1,800 mm Drive power: 0.25 kW Exhaust air volume: 4,000 m³/h To be provided by the customer Compressed air consumption: 980 Nl/min. Ionisation as nozzle bar, not EX) with compressed air nozzles, Compressed air consumption 840LN/min. Pos. 2 Automatic spray gun VEN SPRAY Comfort- Manufacturer Venjakob - Type. VEN SPRAY Comfort CNC 7000 - Year of construction 2017 - Working height approx. 930mm+-20mm - Working width 1300 mm - Operating side left - Price for overhauled machine - Actual condition, machine not overhauled - Gun drive in duo version - Dry extraction system - Extraction nozzle diameter 500 mm - Exhaust air capacity 7,000 m³/h Podjzv Tcuepfx Abpsra - Belt conveyor system - Infinitely variable feed speed ~ 2-6 m/min - With belt cleaning system with doctor blade in tungsten carbide design - Gun control, touch screen CNC7000 - Installed colour circles 1 pc. (optionally more possible) - Supply air filter cover - Suitable for water-based paints - Suitable for solvent-based paints - Control cabinet, free-standing - Volt, Hz 400 / 50 - Colour RAL 7035 - Location, in stock Voltage fluctuations max. +/- 5 %

Condition: like new (used), Year of construction: 2019, functionality: fully functional, 5 axis double head sawing machine FOM INDUSTRIE KEOPE E5 6.6 m Year: 2019 Condition: excellent, as new Technical specifications and equipment installed on the machine (standard and options): - No.2 new FOM carbide tungsten saw blades Ø 600 mm - Minimum cutting capacity between two heads: 470 mm (with heads at 90°) - Maximum cutting capacity between two heads: 6.6 m - No.4 vertical vices and No.2 horizontal (for step-by-step operation) - Micro-drop pure oil blade lubrication system - Set up for the extraction of chips and fumes - Blade motors, three phase 5 HP (3.7 kW) - 230/400 V- 50Hz. Blade rotation speed 2400 RPM - Head rotation between 22.5° and 140° (Y and Z axes) with electronic control (vertical axis) Prjdpfswk R A Dex Abpsa - Internal blade inclination between 90° and 45° (W and U axes) with electronic control (horizontal axis) - Handling of mobile head (X axis) with electronic control - Mobile head max. speed 25 m/min. - Hydraulic saw blade feed (adjustable blade exit speed - quick return) - Profile lifting kit - Loading roller conveyor length 2.2 m, width 400 mm (on mobile head) - No.3 intermediate pneumatic retractable support - Chip conveyor belt - Label printer - FSTCut software - Software for special cut-off (beyond measure and super minimum) and profile bevel cut for 45° cuttings - Step-by-step cutting software, complete with 1 extra surface on fixed head, 90° cuts, two-hand control - Vacuum cleaner

Year of construction: 2026, condition: new, functionality: fully functional, Standard configuration: ▪   No. 2 carbide tungsten saw blades Ø 600 mm ▪   Integral safety casing for cutting area protection ▪   No. 4 vertical vices ▪   2 Retractable pneumatic intermediate supports Podpfeztr Rrex Abpera ▪   Loading roller conveyor 400 (Useful length 2,2 m) on mobile head ▪   Minimum quantity lubrication (MQL) with pure oil ▪   Greasing gun ▪   Set up for the extraction of chips and fumes ▪   15' touch screen control panel (IP65) on linear guides ▪   PC operator interface ▪   Operating system Windows ® ▪   Real time numerical control ▪   FSTCUT4 software licence ▪   Software management of cutting in minimum and super-minimum mode for special lengths ▪   Software management of cutting in oversize mode for special lengths ▪   Software management of cutting in trimming mode for cut ends with variable angles ▪   Teleservice for the first 12 months Optional equipment installed on the machine: ▪ PR-29060 Profile lifting kit ▪ PR208207 Third intermediate pneumatic retractable support ▪ PR206695 Chip conveyor belt ▪ PR203359 Label printer ▪ PR203356 Licence for step-by-step cutting software, complete with 1 extra surface on fixed head, horizontal clamps on fixed and mobile head (no. 2), 90° cuts, two-hand control ▪ IV33160 Vacuum cleaner for extraction of chips and fumes

Condition: used, Year of construction: 2023, For inquiries regarding the attachment, Mr. Herden will be your contact (by phone). Seppi M. MINI-BMS 105 / 5-10 t / Forestry Mulcher / CUT CONTROL / DEMO – Unit / Year: 2023 / In stock & immediately available Price: €14,090.00 net / €16,767.10 gross - Working width: 1.05 m - Overall width: 1.20 m - Depth: 1.03 m - Height: 0.72 m - Mulcher for excavator attachment - Suitable for mulching along riverbanks, in forests, and other hard-to-access areas - Mulches brushwood and shrubs up to 10 cm Ø - For excavators from 5-10 tonnes - For mounting on various adapter plates - Drive designed for hydraulic motor, depending on the carrier vehicle’s oil flow rate - Indirect V-belt drive with 5 V-belts - Reinforced housing made from wear-resistant AR 400 steel - Drop-forged counter blades - Hydraulically adjustable hood - Continuous hinge along the entire hood length - Front guard with chains - Rear guard with chains - Skids, height-adjustable, reinforced with tungsten carbide plate - Colour: red RAL3020 · anthracite RAL7021 OPT 228 Forestry rotor with fixed MINI DUO tools (2 carbide tips) 21 pcs, total machine weight with OPT 228*: 445 kg Pjdpjyltv Uofx Abpjra OPT 513 CUT CONTROL - Depth limiter for rotor with fixed tools OPT 291 VARIO FLOW Axial piston hydraulic motor with variable displacement 29-58 cm³ and overpressure valve - Displacement in cm³ (min-max): 29 - 58 - Required hydraulic pressure in bar (min-max): 150 - 250 - Required hydraulic oil flow in l/min (min-max): 60 - 130 Spacer adapter for BE314 Z1 - Approx. 200 mm high Optional: MS08 adapter plate incl. bolts and installation = €1,410.00 net We also have many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and available for immediate delivery. An independent hydraulic power unit is recommended for the drive. 3 hydraulic lines are required: supply, return, and drain. An additional double-acting hydraulic connection is needed for the hydraulic hood. The unit is supplied without hoses, connectors, and adapter plate. Financing offers available upon request. We are an official distribution and service partner for: - Westtech - Gierking GMT - OilQuick - Weber MT - Holp - DMS - Seppi M. - Magni Telehandlers - JCB Construction Equipment - Mercedes-Benz - Iveco Additionally, with 800 used vehicles in stock, we are among the largest commercial vehicle dealers in Germany. We offer the full Seppi M. product range! Subject to errors and prior sale! Internal no.: 170048 Contact Marius Herden for further information.

Condition: used, Single Head Cutting Saw – FOM Spring 45 A - Available with loading and unloading roller conveyors. Podpfxoy Ukr Tj Abpjra Professional single head up-cut saw designed for high-precision cutting of aluminium profiles and light alloys. The FOM Industrie SPRING 45 A is equipped with pneumatic head tilting and hydro-pneumatic blade feed. Main features - Ø 450 mm tungsten carbide blade - Pneumatic head tilting around the horizontal axis - Cutting positions: 20° right 45° right 90° 45° left 20° left - Mechanical stops for intermediate positions with cushioned support, manually adjustable on a wide graduated scale - Hydro-pneumatic blade feed - Direct motor/blade transmission - Full cutting area guarding with automatic closing system Equipment Horizontal clamps Vertical clamps 2.2 kW blade motor Integrated safety system Robust structure for continuous professional use Applications Ideal for: window and door manufacturers aluminium processing industrial profile cutting light metal fabrication production of frames and curtain walls

Condition: good (used), functionality: fully functional, Year of construction: 2007, operating hours: 1,153 h, DYNO-MILL KD 6 Agitator Bead Mill (2007) Psdjx Tdyzopfx Abpsra For sale is a DYNO-MILL KD 6 horizontal agitator bead mill, manufactured by Willy A. Bachofen AG (WAB). This machine is a premium Swiss-made unit designed for the continuous dispersion and wet-grinding of pumpable products, ranging from low to high viscosity. This unit was manufactured in 2007 and decommissioned in fully functional, running condition with no known faults. It is distinguished by its exceptionally low usage history, having logged only 1’153 operating hours. It comes equipped with a high-wear-resistant Silicon Carbide (SiSiC) inner cylinder and hardened stainless steel discs. It is sold as a complete bundle, including a peristaltic pump, a tool kit, the original electric cabinet and yttrium-stabilized zirconium balls (used). Highlights • Low Usage: Only 1'153 operating hours—internal mechanics are in excellent condition. • High-End configuration: Fitted with a ceramic Silicon Carbide (SiSiC) inner cylinder (6mm wall thickness) and hardened stainless steel discs for durability and contamination control. Sintered Silicon Carbide (SSiC) prevents product overheating significantly better than Zirconium or Steel liners. • Ready to Run: Sold as a complete package including the Electric Cabinet and a Peristaltic Product Pump. • Features the industry-standard WAB dynamic gap separator and pressure-balanced mechanical seal. • Voltage: Fitted with a modern Danfoss VLT frequency converter featuring wide-range input (380-480V, 50/60Hz), making the machine immediately compatible with both European (400V) and US (480V) power grids without modification Technical Specifications • Manufacturer: Willy A. Bachofen AG (WAB), Switzerland • Model: KD 6 • Grinding Chamber Volume: 6.0 Liters (Net volume ~5.7 Liters) • Throughput: approx. 50 – 200 kg/h (dependent on product/viscosity) • Main Drive: 11 kW Motor (440V / 60Hz rated) • Separation System: Dynamic gap separator (Tungsten Carbide rotor/stator) with adjustable gap width (0.15–1.0 mm) • Shaft Seal: Double mechanical seal (DGD) with integrated pressure rinsing circuit • Cooling: Forced water cooling jacket for the grinding cylinder • Weight: 695 kg 
 Scope of Delivery • Mill: DYNO-MILL KD 6 base unit • Grinding System: Silicon Carbide (SiSiC) Inner Cylinder & Hardened Stainless Steel Discs • Feed Pump: Peristaltic Pump included • Controls: Original Electric Cabinet included • Grinding Media: Ceramic Beads, Zirconia Partially Stabilized with Yttria, four sizes, each approx. 25Kg (0.4 - 0.6 mm / 0.8 - 1.0 mm / 1.2 - 1.4 mm / 1.6 - 1.8mm) • Documentation: Operating instructions and wiring diagrams Condition • Mechanical: Excellent, running condition with no known faults at the time of decommissioning. • Cosmetic: The machine is clean but shows minor cosmetic wear (see pictures for visual details) • Last application: Food Typical Applications • Ideal for fine particle size reduction in industries such as: • Paints, Inks, and Coatings • Agrochemicals and Chemicals • Life Sciences and Microbiology • Food and cosmetics We ship worldwide. If you are interested or have any questions, please get in touch! Can be inspected in Liestal, Switzerland.

Condition: new, color: grey, Field of application: Mining Empty weight: 32.000 kg Dimensions (LxBxH): 2200 x 310 x 430 cm Tyre size on axle rear: 225 Tyre tread remainder on axle rear: 100% - Central lubrication - Originally painted - Tool box MOBILE SAND MAKER Feeding Hopper : 10 m3 Crusher Feeding Belt Conveyor 800*9000mm VSI700 Vertical Shaft Impact Crusher 132kw Vibrating Screen 2 Decks 1600x5000mm 11 kw Feedback conveyor 600*8000mm Stockpile Conveyors 600*8000mm Mobile Chassis 2 Axles-Compacible With EU Road Regulations Automation -PLC- with Tablet and PC Controlled Industrıal Paint on 1 Layer Linings-120-140 Micron- Barriers-Ladders-Platfroms Galvanised PLANT DETAIL Production Capacity 40-60 tph 0-5mm Maximum Feeding Size 50mm Feeding Height 3.8 meters Main Configuration VSI Crusher + Vibrating Screen Predjx D A H Eepfx Abpoa Total Motor Power 165 kW Electric Generator Requirement 350 kVA Weight of the plant 31 Tonnes Sizes of the plant 14(L) x 3 (W) x 4.2(L) meters Chassis Type Single chassis on wheels Production Capacity 100-150 tph Maximum Feeding Size 50mm FEEDER PROPER FOR HEAVY DUTY Dimensions : 900x4100 mm Bunker : 15 m³ Capacity : 150 to 200 tons / hour Grid Length : 1160 mm Main Body Sheet : 20 mm. Weight : 5.5 tons. Number of springs : 111 ea Type of Bypass : Flat grid type (throttle transfer) Grill casting : 16-18 mn. 1,5 cr. Type of Bunker : With flat ramp climbing Anchorage slots : pin click - fit Bypass chute : With rear additional saddle 2-Model : VSI 700 -CR Max Feed : 35 mm. Hard Condition Rotor Diameter : 760 mm. / Off Std. Rotor Rotor Speed : 50-70 m / s. Drive : 132 kW / 1500 rpm. Capacity : 40-60 tons / hour 0-5 sand production at 5-32 mm feed. Total Capacity : 80-120 tons / hour Weight : 8,500 kg Rotor Diamond Inserts (Two-row - 6 pcs Ductile Iron Tungsten Carbide Tipped) Other Wear Parts (2 Molybdenum, 22 Chrome Alloy Castings) Electric Motorized Hydraulic Unit (Used for Belt tensioning and Upper Body Lifting.) One-sided maintenance platform with ladder. Drive pulley for two separate speeds (1400 rpm - 1600 rpm) Vibration sensor switch Maintenance Crane Crusher Feeding Belt conveyor Rated sizes : 800 x 9000 mm Motor power : 7 kw 1500 d/d Power Transmission : Motorized Reducer Drive drum : 273 Vulcanized Rubber Coating Tail drum : Angle process over pipe Body Construction : Sheet Metal Body Rubber Tension System : SNH type sliding bedding Carrier : triplet assembly pedestal Group of turning roll : single hanger system Type of reducer : İ-MAK reducer Band rubber : 5 layers...

Year of construction: 2003, operating hours: 65,470 h, condition: refurbished (used), functionality: fully functional, machine/vehicle number: Titan 68R-APC/ 2 68F-60-40-1100-UT, Titan 68R-APC/2 68F-60-40-1100-UT with tungsten carbide cylinder and screw (designed for WPC-HDPE base) Very good feeding behavior and good processing. Screw modification for optimal use, including in the recycling sector. The system has been completely overhauled and is ready for use. Prsdpfxszh Edno Abpsa Feeder optionally available. SIHI vacuum pump. For throughputs up to 400 kg/h. For highly filled compounds, approximately 180 kg/h. 4-zone heating.

Condition: used, Year of construction: 2024, For inquiries regarding the attachment, Mr. Herden is available to assist you (by phone). Seppi M. BMS 125 Forestry Mulcher / incl. rotary actuator / Year of manufacture: 2024 / DEMO machine / in stock & immediately available / very good condition Price: €33,490.00 net / €39,853.10 gross Working width: 125 cm Total width: 156 cm Depth: 111 cm Height: 85 cm Weight: 1,285 kg - Ideal machine for mulching in hard-to-reach locations such as along roadsides, riverbanks, steep slopes, or for clearing gas and power lines - Mulches shrubs and wood up to 30 cm Ø - Suitable for excavators from 13 to 30 tonnes - For mounting to various adapter plates - Drive designed for hydraulic motor depending on the carrier machine’s flow rate - Indirect V-belt drive with 5 V-belts - Reinforced double-walled housing made of wear-resistant AR 400 steel - Drop-forged counter blades - Hydraulically adjustable rear hood - Continuous hinge along the entire length of the hood - Front chain guard - Rear chain guard - Height-adjustable skid shoes in sandwich design, reinforced with a carbide plate - Colour: red RAL3020 · anthracite RAL7021 OPT 468 Rotor with fixed tools and tungsten carbide inserts - 1 x MONO EXTREME V-LOCK L, part no. 19702266 - 33 x MONO TIP V-LOCK, part no. 19702259 - 1 x MONO EXTREME V-LOCK R, part no. 19702267 OPT 465 M-BOOST angle-axis piston motor - With automatic displacement regulation 60–80 cm³ and pressure relief valve - Displacement in cm³ (min-max): 60–80 - Required pressure in bar (min-max): 200–350 - Required hydraulic flow rate: 80–170 l/min OPT 372 hydraulic 190° rotation device OPT 158 hydraulically adjustable hood - 24V solenoid valve for opening the rear hood Optional: Verachtert CW20/30/40 adapter plate incl. bolts and installation = €2,510.00 net The rotor requires 3 hydraulic lines: supply, return, and leakage oil. An additional hydraulic circuit is required for the hood. The unit is supplied without hoses or connectors. Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and immediately available. Our warehouse has a very large selection of various Seppi M. products that are ready for immediate delivery! Mr. Herden is happy to assist you by phone. Psdpfsyltvbsx Abpsra Upon request, we can also provide you with a financing offer. We are an official Seppi M. sales and service partner. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Magni telehandler sales and service partner. We are an official JCB construction equipment sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. Additionally, with a stock of 800 used vehicles, we are one of the largest commercial vehicle dealers in...

Condition: ready for operation (used), Year of construction: 2018, machine/vehicle number: 974/1-810, functionality: fully functional, operating hours: 1,483 h, workpiece height (max.): 60 mm, feed rate X-axis: 18 m/min, controller model: Edge Control 19 mit 18,5" Touchscreen, The machine was last serviced in February 2026 and will continue to operate until August 5, 2026. The machine has the following configuration: Edge milling unit 1802 Motor power: 2 x 2.0 kW 1st milling cutter: Diamond Ø 70 x 64 x 30 mm, Z2+2, left-hand rotation for edge milling unit 2nd milling cutter: Diamond Ø 70 x 64 x 30 mm, Z2+2, right-hand rotation for edge milling unit Edge feeder 1901 SYNCHRO (fully automatic) Glue application station Glu Jet GJ301 (automatic) Power: 2.3 kW, 50 Hz Cartridges: Reservoir for 14 cartridges (1.4 kg) GluJet collection container Printing unit 1913 MOT Cutting unit 1918 (60 mm) pneumatic Multi-function milling unit 1826 MOT4 Motor power: 2 x 0.65 kW Air Stream System milling cutter: Diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2 mm, left-hand rotation Air Stream System milling cutter: Diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2 mm, right-hand rotation Profile milling unit 1833 MOT4 Podezrf Nrjpfx Abpjra 1st milling cutter: Diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 Radius R = 2 mm, left-hand rotation with CM technology 2nd milling cutter: Diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 Radius R = 2 mm, right-hand rotation with CM technology Scraping blade unit 1929 MOT4 Tungsten carbide reversible inserts for scraping blade holder R = 2 mm (2 pieces required) Surface scraping blade FK 701 Smoothing unit 1940 (2 x 0.12 kW, 50 Hz, 1400 rpm) Spray device 1856 TECHNICAL DETAILS Feed speed: 10 - 18 m/min Workpiece length min: 160 mm Workpiece width min: 60 mm Workpiece thickness: 8 - 60 mm Edge height max.: 65 mm Edge thickness roll material: 0.4 - 3 mm Edge thickness strip material max.: 8 mm MACHINE DETAILS Control: Edge Control 19 with 18.5" touchscreen Infeed guide rail length: 1,350 mm Electrical system for stepless feed: 400 V / 50 Hz Feed electric motor: 2.2 kW Operating hours: 1,483 h EQUIPMENT Motorized pressure bridge adjustment Nesting - tactile probe vertical, top & bottom Edition 18 package ECO MODE energy-saving mode ITronic system

Condition: new, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone at ...). Seppi M. KASTOR hyd to / Stump Grinder / NEW / In Stock & Immediately Available Price: €27,790.00 net / €33,070.10 gross - Cutter wheel width: 0.11 m - Cutter wheel diameter: 0.90 m - Overall width: 0.88 m - Depth: 1.80 m - Height: 1.30 m - Weight: 868 kg - Stump grinder for excavator attachment - Designed for removal of tree stumps and roots - Grinds stumps up to 50 cm deep - Suitable for excavators from ... t - Can be mounted to various attachment plates - Drive intended for hydraulic motor depending on the hydraulic output of the carrier machine Pjdeyltvzspfx Abpsra - Indirect double V-belt drive with 2x5 V-belts - Hydraulically adjustable hood - Double chain guard - Rotor equipped with 50 fixed tungsten carbide-tipped tools - Colour: red RAL3020 · anthracite RAL7021 OPT 074 Two axial piston hydraulic motors F12-80 cm³ with overpressure valve - Displacement in cm³: 2 x 80 - Required hydraulic pressure in bar (min-max): 200 - 350 - Required hydraulic flow in l/min (min-max): 140 – 220 An independent hydraulic system is recommended for operation. Three hydraulic lines are required: feed, return, and drain. An additional double-acting hydraulic connection is required for the hydraulic hood. The unit is supplied without hoses, connections, or attachment plate. Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) are in stock and immediately available. We have a very large selection of various Seppi M. products in stock and ready for immediate delivery at our warehouse! Please contact us at ... for further information. On request, we are happy to provide a financing offer. We are official sales and service partners for: - Seppi M. - Magni Telehandlers - DMS - Westtech - JCB Construction Equipment - Mercedes-Benz - Iveco - Holp - OilQuick With 800 used vehicles in stock, we are also one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi M. product range to you! Errors and prior sale excepted! = Further information = Please contact Marius Herden for further information.

Condition: new, Brugger FMP 225 Forestry Mulcher – New, 225 cm working width, ideal for heavy-duty mulching tasks! The Brugger FMP 225 is a robust forestry mulcher designed for agricultural, forestry, and fallow land applications. Featuring a double belt drive, 36 tungsten-carbide-tipped hammers, and hydraulic equipment, it is ideally suited for tractors from 110 hp – reliable, powerful, and built for tough jobs. Technical Data – Brugger FMP225: Pedpfx Ajwhyw Eebpera Working width: 225 cm Drive: Double belt drive (5 + 5 V-belts) PTO speed: 1000 rpm Required power: 110 – 160 hp Weight: approx. 1,800 kg Mounting: Three-point linkage CAT II / III Italian CMR gearbox Rotor shaft Ø: 219 mm (465 mm with hammers) Hammers: 36 pieces, tungsten-carbide-tipped Working depth: –70 mm / –30 mm / +10 mm (3-stage adjustable) Housing: 8 mm wall thickness, 12 mm side panels Hydraulic connections: 2x double-acting (1x for tailgate, 1x for pressure roller) Equipment: Hydraulic rear flap & pressure roller Included: PTO shaft Prices + VAT: Brugger FMP180 180cm – 30 hammers, 1,600kg = €10,900 Brugger FMP200 200cm – 32 hammers, 1,700kg = €11,900 Brugger FMP225 225cm – 36 hammers, 1,800kg = €12,900 ----- Contact us for a tailored quote!

Condition: new, For enquiries about the attachment, Mr. Herden will be happy to assist you (by phone). Seppi M. MINI-BMS 105 / Forestry Mulcher / MS08 / 5-10 t / CUT CONTROL / NEW / in stock & immediately available Price: €15,890.00 net / €18,909.10 gross - Working width: 1.05 m - Overall width: 1.20 m - Depth: 1.03 m - Height: 0.72 m - Mulching attachment for excavator mounting - Suitable for mulching along riverbanks, in forests, and other hard-to-reach areas - Mulches brush and wood up to 10 cm diameter - For excavators from 5-10 tonnes - Compatible with various mounting plates - Drive via hydraulic motor, depending on the carrier’s oil flow - Indirect belt drive with 5 V-belts - Reinforced housing made of wear-resistant AR 400 steel - Drop-forged counter blades - Hydraulically adjustable hood - Continuous hinge along full hood length - Front protection with chains - Rear protection with chains - Height-adjustable skid plates, reinforced with tungsten carbide plate - Colour: red RAL3020 · anthracite RAL7021 OPT 228 Forestry Rotor with fixed MINI DUO tools (2 carbide inserts) 21 pcs, total machine weight with OPT 228*: 445 kg OPT 513 CUT CONTROL: - Depth limiter for rotor with fixed tools OPT 106 VARIO FLOW: Axial piston hydraulic motor with variable displacement 22 - 45 cm³ and pressure relief valve - Displacement in cm³ (min-max): 22 - 45 - Required hydraulic pressure in bar (min-max): 150 - 250 - Required hydraulic flow in l/min (min-max): 40 - 100 Predpfjyltvnex Abpea Intermediary adapter for BE314 Z1 - approx. 200 mm high - Not required when using OPT 372 hydraulic 190° rotation device Optional: MS08 adapter plate incl. bolts and installation = €1,410.00 net For operation, an autonomous hydraulic system is recommended. 3 hydraulic lines are required: supply, return, and drainage. A double-acting hydraulic connection is additionally needed for the hydraulic hood. The machine is delivered without hoses, fittings, and mounting plate. Mr. Herden (phone) will be happy to assist you. We are also happy to provide a financing offer upon request. We are an authorised distribution and service partner for Seppi M. We are an authorised distribution and service partner for Westtech. We are an authorised distribution and service partner for Gierking GMT. We are an authorised distribution and service partner for OilQuick. We are an authorised distribution and service partner for Weber MT. We are an authorised distribution and service partner for Holp. We are an authorised distribution and service partner for DMS. We are an authorised distribution and service partner for Magni telehandlers. We are an authorised distribution and service partner for JCB construction machinery. We are an authorised distribution and service partner for Mercedes-Benz. We are an authorised distribution and service partner for Iveco. With a stock of 800 used vehicles, we are also one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi M. product range! Errors and prior sale excepted! = More information = Contact Marius Herden for further information.

Condition: new, power: 132 kW (179.47 HP), fuel type: electric, color: black, Field of application: Mining Empty weight: 16.500 kg Dimensions (LxBxH): 250 x 300 x 400 cm Make of engine: Siemens Required tractor power: 132180200 hp Volume of the tank: 100 m^3 Productivity: 50 tph = Additional options and accessories = - Central lubrication Pedpfx Abex D A Ucjpora = Remarks = 1-Model : VSI 700 -CR Max Feed : 35 mm. Hard Condition Rotor Diameter : 760 mm. / Off Std. Rotor Rotor Speed : 50-70 m / s. Drive : 132 kW / 1500 rpm. Capacity : 40-60 tons / hour 0-5 sand production at 5-32 mm feed. Total Capacity : 80-120 tons / hour Weight : 8,500 kg Rotor Diamond Inserts (Two-row - 6 pcs Ductile Iron Tungsten Carbide Tipped) Other Wear Parts (2 Molybdenum, 22 Chrome Alloy Castings) Electric Motorized Hydraulic Unit (Used for Belt tensioning and Upper Body Lifting.) One-sided maintenance platform with ladder. Drive pulley for two separate speeds (1400 rpm - 1600 rpm) Vibration sensor switch Maintenance Crane 3- Model : VSI 800 -CR Max Feed : 50 mm. Rotor Diameter : 1000 mm. / Off Std. Rotor/Closed Rotor Rotor Speed : 50-70 m / s. Drive : 180 kW / 1500 rpm. Capacity : 70-100 tons / hour 0-5 sand production at 5-50 mm feed. Total Capacity : 100-150 tons / hour VSI-900-CR 1. Rotor Diamond Inserts (Two-row - 6 pcs Ductile Iron Tungsten Carbide Tipped) 2. Other Wear Parts (2 Molybdenum, 22 Chrome Alloy Castings) 3. Electric Motorized Hydraulic Unit (Used for Belt tensioning and Upper Body Lifting.) 4. One-sided maintenance platform with ladder. 5. Drive pulley for two separate speeds (1400 rpm - 1600 rpm) 6. Vibration sensor switch 7. Maintenance Crane 3-Model : VSI 900 -CR Max Feeding : 45 mm. Rotor Diameter : 900 mm. / CLOSE ROTOR Rotor Speed : 50-70 m / sec. Drive : 185 kW x 2/1500 rpm. Capacity : 70-80 tons / hour 0-5 sand production at 5-15 mm feed. Total Capacity : 230 tons / hour Weight : 14.500 kg Standard Equipments: 1.Electric motorized Hydraulic Unit (Used for Belt tensioning and Upper Body Lifting) 2. One-sided maintenance platform (galvanized grating and steps) 3. Drive pulley for two separate speeds (1400 rpm - 1600 rpm) 4. Automation control panel (Vibration sensor switch - Breaker feed control-working hours) 5. Maintenance Crane

Condition: new, color: grey, Field of application: Mining Empty weight: 32.000 kg Dimensions (LxBxH): 2200 x 310 x 430 cm Tyre size on axle rear: 225 Tyre tread remainder on axle rear: 100% MOBILE SAND MAKER Feeding Hopper : 10 m3 Crusher Feeding Belt Conveyor 800*9000mm VSI700 Vertical Shaft Impact Crusher 132kw Vibrating Screen 2 Decks 1600x5000mm 11 kw Feedback conveyor 600*8000mm Stockpile Conveyors 600*8000mm Mobile Chassis 2 Axles-Compacible With EU Road Regulations Automation -PLC- with Tablet and PC Controlled Industrıal Paint on 1 Layer Linings-120-140 Micron- Barriers-Ladders-Platfroms Galvanised PLANT DETAIL Production Capacity 40-60 tph 0-5mm Maximum Feeding Size 50mm Feeding Height 3.8 meters Main Configuration VSI Crusher + Vibrating Screen Total Motor Power 165 kW Electric Generator Requirement 350 kVA Weight of the plant 31 Tonnes Sizes of the plant 14(L) x 3 (W) x 4.2(L) meters Pedpfx Aeyh Hngebpjra Chassis Type Single chassis on wheels Production Capacity 100-150 tph Maximum Feeding Size 50mm FEEDER PROPER FOR HEAVY DUTY Dimensions : 900x4100 mm Bunker : 15 m³ Capacity : 150 to 200 tons / hour Grid Length : 1160 mm Main Body Sheet : 20 mm. Weight : 5.5 tons. Number of springs : 111 ea Type of Bypass : Flat grid type (throttle transfer) Grill casting : 16-18 mn. 1,5 cr. Type of Bunker : With flat ramp climbing Anchorage slots : pin click - fit Bypass chute : With rear additional saddle 2-Model : VSI 700 -CR Max Feed : 35 mm. Hard Condition Rotor Diameter : 760 mm. / Off Std. Rotor Rotor Speed : 50-70 m / s. Drive : 132 kW / 1500 rpm. Capacity : 40-60 tons / hour 0-5 sand production at 5-32 mm feed. Total Capacity : 80-120 tons / hour Weight : 8,500 kg Rotor Diamond Inserts (Two-row - 6 pcs Ductile Iron Tungsten Carbide Tipped) Other Wear Parts (2 Molybdenum, 22 Chrome Alloy Castings) Electric Motorized Hydraulic Unit (Used for Belt tensioning and Upper Body Lifting.) One-sided maintenance platform with ladder. Drive pulley for two separate speeds (1400 rpm - 1600 rpm) Vibration sensor switch Maintenance Crane Crusher Feeding Belt conveyor Rated sizes : 800 x 9000 mm Motor power : 7 kw 1500 d/d Power Transmission : Motorized Reducer Drive drum : 273 Vulcanized Rubber Coating Tail drum : Angle process over pipe Body Construction : Sheet Metal Body Rubber Tension System : SNH type sliding bedding Carrier : triplet assembly pedestal Group of turning roll : single hanger system Type of reducer : İ-MAK reducer Band rubber : 5 layers of 10 mm EP-125 eksaş conveyor Drive bearings : UCF type with...

Condition: new, For inquiries regarding the attachment, please contact Mr. Herden (by phone). Seppi M. BMS 125 Forestry Mulcher / incl. Rotary Motor / NEW / In Stock & Immediately Available Price: €35,190.00 net / €41,876.10 gross Working width: 125 cm Overall width: 156 cm Depth: 111 cm Height: 85 cm Weight: 1,285 kg - Ideal machine for mulching in hard-to-reach locations such as roadside verges, riverbanks, steep slopes, or for clearing around gas and electricity lines - Mulches brush and wood up to 30 cm diameter - For excavators from 13 to 30 t - Suitable for mounting on various attachment plates - Drive designed for hydraulic motor, depending on the carrier’s oil flow - Indirect V-belt drive with 5 belts - Reinforced double-walled housing made of wear-resistant AR 400 steel Pedpfx Ajyltv Iebpora - Drop-forged counter blades - Hydraulically adjustable rear hood - Continuous hinge along the entire length of the hood - Front protection with chains - Rear protection with chains - Height-adjustable skid runners in sandwich construction, reinforced with a hard metal plate - Color: red RAL3020 · anthracite RAL7021 OPT 468 Rotor with fixed tools with tungsten carbide inserts - 1 x MONO EXTREME V-LOCK L, part no. 19702266 - 33 x MONO TIP V-LOCK, part no. 19702259 - 1 x MONO EXTREME V-LOCK R, part no. 19702267 OPT 465 M-BOOST Axial Piston Motor - With automatic displacement adjustment 60-80 cm³ and pressure relief valve - Displacement in cm³ (min-max): 60 - 80 - Required pressure in bar (min-max): 200 - 350 - Required hydraulic flow: 80 - 170 l/min OPT 372 hydraulic 190° rotary device OPT 158 hydraulically adjustable hood - 24V solenoid valve for opening the rear hood The rotor requires 3 hydraulic lines: pressure, return, and leakage oil. An additional hydraulic circuit is needed for the hood. The machine is supplied without hoses or fittings. Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) are in stock and immediately available. We have a very large selection of various Seppi M. products in our warehouse, all available for immediate delivery! Please contact us for more information. We are happy to provide you with a financing offer upon request. We are the official sales and service partner for Seppi M. We are the official sales and service partner for Magni telehandlers. We are the official sales and service partner for DMS. We are the official sales and service partner for Westtech. We are the official sales and service partner for JCB construction machinery. We are the official sales and service partner for Mercedes-Benz. We are the official sales and service partner for Iveco. We are the official sales and service partner for Holp. We are the official sales and service partner for OilQuick. Additionally, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the full Seppi M. product range for you! Errors and prior sale reserved! = Further Information = Please contact Marius Herden for more details.

Condition: new, For inquiries about the attachment, Mr. Herden will be pleased to assist you by phone. Psdpfoyii Tzex Abpera Seppi M. BMS 125 Forestry Mulcher / NEW / in stock & immediately available Price: €30,690.00 net / €36,521.10 gross - Working width: 1.25 m - Overall width: 1.56 m - Depth: 1.11 m - Height: 0.85 m - Mulching attachment for excavator mounting - Ideal machine for mulching in hard-to-access areas such as roadsides, riverbanks, steep slopes, or for clearing gas and power lines - Mulches brush and wood up to 30 cm Ø - For excavators from 13 to 30 t - For installation on various mounting plates - Drive designed for hydraulic motor, depending on carrier oil flow - Indirect belt drive with 5 V-belts - Reinforced double-walled housing made of wear-resistant AR 400 steel - Drop-forged counter blades - Hydraulically adjustable rear hood - Continuous hinge across the entire hood length - Front and rear chain guards - Height-adjustable support skids in sandwich construction, reinforced with carbide plate - Colour: red RAL3020 · anthracite RAL7021 OPT 468 Rotor with fixed tools with tungsten carbide inserts - 1 x MONO EXTREME V-LOCK L, part no. 19702266 - 33 x MONO TIP V-LOCK, part no. 19702259 - 1 x MONO EXTREME V-LOCK R, part no. 19702267 - Wear-resistant tool holders - Replaceable rotor stub shafts OPT 465 M-BOOST angled-axis piston motor - With automatic displacement regulation 60-80 cm³ and overpressure valve - Displacement in cm³ (min-max): 60 - 80 - Required hydraulic pressure in bar (min-max): 200 - 350 - Required oil flow: 80 - 170 l/min Three hydraulic lines required: supply, return, and drain. The unit is supplied without hoses, connectors, or mounting plate. Many additional adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and immediately available. We have a very large selection of various Seppi M. products in stock and ready for immediate delivery! Mr. Herden will be pleased to assist you by phone. Financing quote available on request. We are official sales and service partner for DMS, Westtech, Gierking GMT, OilQuick, Weber MT, Holp, Seppi M., Magni Telehandlers, JCB Construction Machinery, Mercedes-Benz, and Iveco. With 800 used vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi M. product range for you! Subject to errors and prior sale! = More Information = Please contact Marius Herden for more information.

Condition: new, Year of construction: 2025, Single head sawing machine for aluminium FOM INDUSTIRE PANDA 300 ECHO with measuring system DIGISTOP 4m, measuring caliber DIGIBAR 3,3m and inlet conveyor PORTER 4,2m Machine in stock Configuration: Single head saw with up-feed blade Ø 300 mm and manual positioning of vertical axis FOM INDUSTRIE PANDA 300 ECHO: - Tungsten carbide saw blade Ø 300 mm - Hydro-pneumatic feed of saw blade - Spray mist blade lubrication system - Cutting area guard kit - Two vertical vices Prsdpfx Ajwh Rlgebpoa - Two horizontal vices - Set up for the extraction of chips and fumes Electronic measuring system DIGISTOP 4m: - Min. cutting length 0 mm, maximum 4000 mm - Friendly software using icons and function keys - Accuracy 0.1 mm - Manual piece execution - Measurement list editor - Editor of measurement received by radio or net - Removal of piece after every cut - Visualization of reference for each measurement - Roller width 200 mm Wireless electronic measuring bar DIGIBAR 3,3m - Minimum measure 140 mm - Maximum measure (without extension) 1600 mm - Maximum measure (with extension) 3300 mm - In set includes two extensions: 1400 mm and 1700 mm - Accuracy 0.1 mm - Weight 2190 gr - Power supply 4 recharg. batt. AAA - Absolute measuring system (no recalibration required) - 2 LCD lines 16 characters - Industrial keyboard 6 keys protected - 2 LED signal for immediate display of the state of instrument - Ergonomic Handle with a simple use button for measurement capture Inlet roller conveyor PORTER 4,2 m: - Loading capacity Kg. 10 per meter - Plastic rollers, width 200 mm - Vertical plastic rollers

Year of construction: 2025, condition: new, XZ100228 Single head sawing machine Ø 400 mm for aluminium and PVC with manual blade down-feed and pneumatic vices FOM INDUSTIRE SIKA PLUS M Machine in stock Configuration: Prjdpfxopl Tgmj Abpoa - Aluminium and PVC cutting machine with CE certification - Tungsten carbide saw blade Ø 400 mm - Manual blade lowering (with lever) with pneumatic servo control to reduce operator stress - Side support plates on both sides - Blade motor power 2.2 kW - 2850 rpm - Self-braking motor with blade stop in less than 10 sec - Cutting angle from 45°Lh to 45°Rh on vertical axis and 45°Rh to 90° on horizontal axis - Intermediate angles with mechanical stop - Cylinder blocking involuntary head lowering - Double working pressure servo-controlled in low pressure - 1 pneumatic vertical vice - 2 pneumatic horizontal vices - 1 safety servo-valve for each pneumatic horizontal vice - Conical anti-crushing buffers - Worktable and turntable structure in stabilized cast iron - Motor transmission by belt - Saw blade holding spindle Ø 32 mm - Spray mist blade lubrication system - Integral blade guard in rest position - Set up for the extraction of chips and fumes

Condition: excellent (used), pressure: 210 bar, Gaulin, Homogenizer model MC18 3TPSX. stainless steel clad, 2 stage hydraulic valve assembly, 54mm pistons, Tungsten Carbide coated. aseptic cylinder block, puppet valves.. Remote controlled homogenization pressure adjustment and read-out. Capacity 6000 l/h, 210 bar Pedpjwf Itcofx Abpora Maintenance history available. Spare parts available. Excellent working condition