Used Turning Lathe for sale (9,441)

Condition: used, As-new CNC chuck lathe TAIKAN model HPT 08-380 Serial No. 2015122 Year of manufacture: 2017 Nledpfxswz Rifo Alhsc CNC path control: SIEMENS Sinumerik 828 D Basic Maximum turning length without chuck: 350 mm Maximum turning length with chuck: approx. 300 mm Turning diameter (nominal): 250 mm Swing diameter over bed: 500 mm Travel of Z-axis: 385 mm Travel of X-axis: 200 mm Feed rate (X + Z): 1–8000 mm/sec. Rapid traverse (X): 30,000 mm/sec. Rapid traverse (Z): 36,000 mm/sec. Spindle speed, max.: 4500 rpm Spindle bore: 66 mm Draw tube bore: 50 mm Spindle nose: presumably A2-6 Workpiece weight incl. chuck: max. 200 kg Spindle drive motor power: 11 kW Power supply: 400 Volt, 50 Hz - Electronic handwheel - USB, LAN data interface + CF card - Drum turret with 12 tool stations - Hydraulic 3-jaw power chuck, Ø 215 mm - Infinitely variable spindle speed - Coolant unit - Chip conveyor with rear discharge + basic chip cart Machine footprint with chip conveyor: Length 2200 mm x Depth 2750 mm x Height 1700 mm Machine space requirement: Length 2200 mm x Depth 1750 mm x Height 1700 mm Chip conveyor dimensions: Length 2700 mm x Width 600 mm x Height 1400 mm Weight: 3.5 t Very good condition – as new Machine comes from a showroom and has only a few operating hours.

Condition: used, Thread cutting machine LORCH, SCHMIDT & Co Centre height: 200 mm Centre distance: 400 mm Spindle speed: 56 rpm Chuck diameter: 160 mm Tailstock quill travel: 45 mm Tailstock taper: MK2 Motor power: 0.25 HP Power supply: 380 Volt, 50 Hz - Right- and left-hand rotation - 3-jaw chuck - Spindle drive via geared motor - Without through spindle bore - Tailstock with lever quill Nljdpfx Ajxf Uwxolhsc - Drill chuck MAS 1 to 16 mm Required space (L x W x H): 1200 x 500 x 420 mm Weight: 80 kg Good condition

Condition: good (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 0179 (033), turning length: 125 mm, spindle speed (max.): 7,000 rpm, turning diameter: 32 mm, clamping diameter: 32 mm, workpiece length (max.): 150 mm, The machine is supplied with tool holders and spare parts. TECHNICAL DETAILS Swing diameter over bed: 32 mm Spindle bore: 32 mm Turning length: 125 mm Control: YASKAWA SIEMENS 840 DI V2 Spindle speeds: 7000 rpm Workpiece length: max. 150 mm Clamping diameter: 32 mm Feed rate: 0 - 2000 mm/min MACHINE DETAILS Machine weight: approx. 5.7 t Space requirements: approx. 10.5 x 2 x 1.9 m Connection voltage: 200 V, 3 phases Frequency: 50 / 60 Hz Nsdsx U Tchspfx Alhelc Connected load: 8.0 kVA

Condition: good (used), functionality: fully functional, Center height 110 mm Center width 160 mm Spindle bore 23 mm 3 speeds for clockwise rotation Nodpfx Aleywtd Djhslc and 3 speeds for anti-clockwise rotation

Condition: ready for operation (used), Year of construction: 2007, operating hours: 19,441 h, functionality: fully functional, machine/vehicle number: 6000816, turning length: 50 mm, spindle speed (max.): 12,000 rpm, bar passage: 12 mm, controller model: Mitsubishi TX-8i, counter spindle speed (max.): 12,000 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Turning length: 50 mm Main spindle Technology: Belt-driven spindle Speed: 12,000 rpm Power: 4 kW Torque: 7 Nm Bar capacity: 12 mm Travel in Z1: 50 mm Workpiece clamping: Collet chuck Counter spindle Technology: Belt-driven spindle Speed: 12,000 rpm Power: 4 kW Torque: 7 Nm Travel in X3/Z4: 222/139 mm Rapid traverse in X3/Z4: 15 m/min Workpiece clamping: Collet chuck Tool Carrier I (X/Y) Technology: Turret with 6 stations (fully driven) Tool holder: Ø25 mm Driven tool speed: 8,000 rpm, 1.5 kW, 2.4 Nm Travel in X1/Y1: 35/37.5 mm Rapid traverse in X1/Y1: 15 m/min Tool Carrier II (X/Z) Technology: Turret with 6 stations (fully driven) Tool holder: Ø25 mm Driven tool speed: 8,000 rpm, 1.5 kW, 2.4 Nm Travel in X2/Z2: 35/50 mm Rapid traverse in X2/Z2: 15 m/min Front Attachment Number of stations: 4 Tool holder: Ø28 mm Station pitch: 32 mm Driven tool speed: 12,000 rpm, 4 kW, 7 Nm Number of driven stations: 4 Travel in X3/Z3: 222/139 mm Rapid traverse in X3/Z3: 15 m/min Rear Attachment Number of stations: 4 Tool holder: Ø28 mm Station pitch: 32 mm Driven tool speed: 8,000 rpm, 1.5 kW, 2.4 Nm Number of driven stations: 4 Travel in X4: 39 mm Rapid traverse in X4: 15 m/min MACHINE DETAILS Control system: Mitsubishi TX-8i Dimensions & Weight Spindle center height above floor: 1,050 mm Dimensions (L x W x H): 1,450 x 1,098 x 1,700 mm Dimensions (L x W x H) with standard coolant tank: 2,355 x 1,098 x 1,700 mm Weight with control cabinet (max. configuration): 2,000 kg Weight without control cabinet (max. configuration): 1,600 kg Weight with control cabinet (min. configuration): 1,200 kg Weight without control cabinet (min. configuration): 850 kg Nledjx Hxv Depfx Alhsc Operating Hours Power-on hours (control): 19,441 h Automatic mode 1: 7,607 h Automatic mode 2: 6,720 h Production time: 38,989 h Total counter: 50,536 h EQUIPMENT Chip conveyor Coolant pump Bar feeder FMB minimag 3200 Workpiece discharge device (tube) Mechanical interface prepared Various fixed holders Rinse gun

Condition: excellent (used), Year of construction: 2014, Automatic Lathe Citizen M32 Manufacturer: Citizen Machinery Co. Ltd Model: M32-4M5 Year of manufacture: 2014 Country of origin: Japan Machine weight: 3,550 kg Maximum machining diameter: 32 mm Max. machining length: 320 mm with one chuck Main spindle speed: 200–8,000 rpm Main spindle indexing: 1° C-axis resolution (spindle): 0.001° Counter spindle speed: 200–8,000 rpm Max. clamping diameter of counter spindle: 32 mm Max. drilling diameter front side: 12 mm Max. tapping diameter front side: M10 Max. tapping diameter rear side: M10 Spindle through-hole diameter: 37 mm Number of tool positions: up to 25, depending on configuration Rapid traverse X/Y/Z axes: up to 32 m/min Bar length: 2,500 mm Coolant tank capacity: 198 l Compressed air requirement: 0.5 MPa Noise level: Ø580 dB(A) Memory size: 5120 m, 2048 kB Minimum input increment: 0.1 µm Interface: RS232C Number of programs: 63 Tool offsets: 32 pairs X1 travel: 108 mm Y1 travel: 347 mm Z1 travel: 325 mm X2 travel: 120 mm Y2 travel: 44 mm Z2 travel: 212 mm Nsdeydaadspfx Alhelc X3 travel: 313 mm Z3 travel: 430 mm A3 travel: 150 mm A4 travel: 1,500 mm No guarantee is made for the accuracy, completeness or timeliness of the information provided.

Condition: used, Hydraulic Copying Device SAUTER Type KMC 8001 Copy turning attachment, copying device for lathes The copying device comes from a lathe. Connections for oil supply and oil return Copy stroke: approx. 140 mm Radial travel at 60° mounting: 120 mm Required operating pressure: approx. 25 bar Nljdpfexxmf Iox Alhec Oil flow rate: max. 7 liters/min. Lathe drive power: max. approx. 15 kW Chip cross-section: max. 3.5 mm² Copying slide stroke: approx. 125 mm Distance from turning tool to tracer: 800 mm Net weight of copying device: 120 kg Good condition The matching hydraulic power unit and holders for the pattern parts can be found on our website under the search term 'Sauter'.

Condition: ready for operation (used), Year of construction: 1999, operating hours: 78,000 h, functionality: fully functional, turning length: 205 mm, spindle speed (max.): 10,000 rpm, bar diameter (max.): 20 mm, controller model: Fanuc 16i-T, number of axes: 9, CNC sliding headstock lathe with 9 axes! TECHNICAL DETAILS Axes: X / C1 / Y / E / B / A / X / C2 Maximum bar diameter: 20 mm Maximum turning length: 205 mm / 195 mm Maximum main spindle speed: 10,000 rpm Maximum sub-spindle speed: 10,000 rpm MACHINE DETAILS Nlodpfxsx U Af Ss Alhoc Control: Fanuc 16i-T Coolant: Oil Tank capacity: 170 L Operating hours: 78,000 h EQUIPMENT 4-position tool holder 3 cross drilling units Turret with 8 stations Various additional tool holders Tailstocks Parts conveyor Bar feeder FMB Turbo 3-26 /3200/A Fire extinguishing system Kraft & Bauer Chip conveyor Mayfran

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, turning length: 205 mm, spindle speed (max.): 10,000 rpm, turning diameter: 20 mm, controller model: Cincom Mitsubishi Meldas, counter spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Bar diameter max.: 20 mm Turning length max.: 205 mm Main spindle speed max.: 10,000 rpm C-axis (main spindle): 0.001 degree Counter spindle speed max.: 10,000 rpm C-axis (counter spindle): 0.001 degree Tool capacity: 18 tools Axes: 7 MACHINE DETAILS Control: Cincom Mitsubishi Meldas Dimensions & Weight Machine dimensions (LxWxH): 2,540 x 1,450 x 1,850 mm Machine weight: 1,750 kg Nlodpfx Alox U Afxohsc Bar feeder dimensions (LxWxH): 3,900 x 900 x 1,450 mm Bar feeder weight: 850 kg EQUIPMENT Parts conveyor belt Bar feeder FMB Turbo 3-26

Condition: not inspected (used), Year of construction: 2008, functionality: unexamined, machine/vehicle number: R14507, Year 2008 with Fanuc 18i-TB With LNS Tryton 107 Country of origin: JP Voltage: 200V 3ph 50/60Hz Dimensions: 141x56x140 cm Net machine weight: 950 kg TECHNICAL SPECIFICATIONS (Standard) Number of axes: 6 Number of spindles: 2 Main spindle Max bar diameter: Ø 7 mm Max machining length: 40 mm Stroke: 40 mm Spindle speed: 16,000 rpm Spindle power: 1.1 kW C axis indexing accuracy: 0.0001° Sub-spindle Max bar diameter: 7 mm Spindle speed: 10,000 rpm Power: 0.5 kW C axis indexing accuracy: 1° Njdeya Aq Ropfx Alhjlc Tool post 1 Number of positions: 5 Driven positions: 2 Rotating tool speed: 8,000 rpm Tool post 2 Number of positions: 3 End-working attachment Number of positions: 3 Sub-operation Number of positions: 3 All technical details are provided without obligation and subject to errors or omissions.

Condition: used, Year of construction: 1999, Lathe with 4 tools only for 3-cylinder crank shaft Nodjw Dufiopfx Alhjlc *

Condition: ready for operation (used), Year of construction: 2000, operating hours: 61,000 h, machine/vehicle number: 04800000401, Sales only within EU Please give us your quote for the machine ----- Without packaging; Technical data please see handout in attachment. Nedjhv H Hyepfx Alhelc German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations.

Condition: good (used), Year of construction: 2022, machine/vehicle number: 25666, Equipped with: Hydraulic Unit Sinumerik 840D sl CNC Control Slim Line Operator Panel OP012 W/12 TFT-Color Display 19" Machine Control Panel 20 Tool ATC CAPTO C6 Multifunctional Tool Carrier For Turning and Driven Tools One Fixed Tool Unit Assembled To The Compound Slide W/Coolant Thru The Turning And Drilling Tools, Coolant For The Driven Spindle From The Outside Drilling Spindle Additional Drill Spindle For Orientation Chip Conveyor Coolant Equipment -Including piping and shut-off valve and flow control switch -To supply coolant to tools for coolant and flushing through the cutting tools -To supply coolant for flushing the work piece and chuck -To supply coolant for flushing the working area Paper Band Filter Immersion Cooler High Pressure Coolant Pump, 40 Bar Through Tools Flushing Pistol, Hand Held Air Cleaner - Mechanical Separation "Mist Collector" Tool Life Display Remote Diagnostics Signal Lamp Automatic Door For Loading W/Shuttle Load and Unload Shuttle Swivel Loader Automation Cell Tuned for Part Pallet Conveyor For 20 Raw And Finished Parts Pallets Pallets Designed for Part 596500 Handling System SPC Station (Maximum O 270 mm, Maximum H 150 mm, Maximum Wt. 12 kg) NIO Station (Closing forward leading gravity) Skiving Software (Hardware: Software and user surfaces for skiving technology) Measuring Probe (For measuring diameters and length of the workpiece in the machine) Measuring Software for Teeth Measuring (MDK and Flank Line, Software and User) Measuring Program (Automatically measuring program for measure the position of the two gears to each other, after using sister tools) SPC (Every X workpieces the MDK needs to be measured) Tool Changer (Precut, measurer and final cut) Skiving Tool Identification (Hardware, software for the identification of the skiving tool after tool change) Hydraulic Diagrams Coolant Diagrams Lubrication Diagrams Electrical Wiring Diagrams Hardcopy of Diagrams CF Certificates Nodpfx Aley Tybzehslc Specifications: Workpiece Spindle: -Speed: 0-7000 l/min -Power: 55,2 - 59,7 kW Tool: Capco C6 Tool Spindle: -Speed: 0-6000 l/min -Power: 29 - 41 kW Machine Weight, Floor Space and Voltage Supply: -Operating Voltage: 400V, 3 Phases, 50 Hz -Control Voltage: 24 V -Lighting Voltage: 240 V, 50 Hz -Floor Space: 2,700 x 2,600 mm -Height: 4,000 mm -Total Weight, Approximate: 16,000 kg Longitudinal, Z-Axis: -Stroke: 800 mm -Rapid Rate: 24 m/min -Feed Force: 12 kN Transverse, X-Axis: -Stroke: 900 mm -Rapid Rate: 24 m/min -Feed Force: 12 kN Tool Spindle, B-Axis: -Range: -20 / +90 Degree Y-Axis for Spindle Unit: -Stroke: 200 mm -Rapid Rate: 12 m/min -Feed Force: 6 kN C-Axis Main Spindle: -Positioning Accurace: 9" Multifunctional Tool Carrier: -Power: 29 kW at 100% ED -Power: 41 kW at 44% ED -Torque: 141 Nm at 100% ED -Torque: 212 Nm at 44% ED -Spindle Speed: 0-6000 min-1 -B-Axis for Stepless Motion in a Range Of: -20/+90 Degree Tool Magazine: -Maximum Tool Diameter: 100 mm -Approximate Tool Length: 300 mm -Approximate Tool Weight: 12 kg Swivel Loader: -Maximum Workpiece Diameter: 270 mm -Height: 150 mm -Weight: 16 kg

Condition: good (used), Year of construction: 2019, machine/vehicle number: 25667, Equipped with: Hydraulic Unit Sinumerik 840D sl CNC Control Slim Line Operator Panel OP012 W/12 TFT-Color Display 19" Machine Control Panel 20 Tool ATC CAPTO C6 Multifunctional Tool Carrier For Turning and Driven Tools One Fixed Tool Unit Assembled To The Compound Slide W/Coolant Thru The Turning And Drilling Tools, Coolant For The Driven Spindle From The Outside Drilling Spindle Additional Drill Spindle For Orientation Chip Conveyor Coolant Equipment -Including piping and shut-off valve and flow control switch -To supply coolant to tools for coolant and flushing through the cutting tools -To supply coolant for flushing the work piece and chuck -To supply coolant for flushing the working area Paper Band Filter Immersion Cooler High Pressure Coolant Pump, 40 Bar Through Tools Flushing Pistol, Hand Held Air Cleaner - Mechanical Separation "Mist Collector" Tool Life Display Remote Diagnostics Signal Lamp Automatic Door For Loading W/Shuttle Load and Unload Shuttle Swivel Loader Automation Cell Tuned for Part Pallet Conveyor For 20 Raw And Finished Parts Pallets Pallets Designed for Part 596500 Handling System SPC Station (Maximum O 270 mm, Maximum H 150 mm, Maximum Wt. 12 kg) NIO Station (Closing forward leading gravity) Skiving Software (Hardware: Software and user surfaces for skiving technology) Measuring Probe (For measuring diameters and length of the workpiece in the machine) Measuring Software for Teeth Measuring (MDK and Flank Line, Software and User) Measuring Program (Automatically measuring program for measure the position of the two gears to each other, after using sister tools) SPC (Every X workpieces the MDK needs to be measured) Tool Changer (Precut, measurer and final cut) Skiving Tool Identification (Hardware, software for the identification of the skiving tool after tool change) Hydraulic Diagrams Coolant Diagrams Lubrication Diagrams Electrical Wiring Diagrams Hardcopy of Diagrams CF Certificates Specifications: Workpiece Spindle: -Speed: 0-7000 l/min -Power: 55,2 - 59,7 kW Tool: Capco C6 Tool Spindle: -Speed: 0-6000 l/min -Power: 29 - 41 kW Machine Weight, Floor Space and Voltage Supply: -Operating Voltage: 400V, 3 Phases, 50 Hz -Control Voltage: 24 V -Lighting Voltage: 240 V, 50 Hz -Floor Space: 2,700 x 2,600 mm -Height: 4,000 mm -Total Weight, Approximate: 16,000 kg Longitudinal, Z-Axis: -Stroke: 800 mm -Rapid Rate: 24 m/min -Feed Force: 12 kN Transverse, X-Axis: -Stroke: 900 mm -Rapid Rate: 24 m/min -Feed Force: 12 kN Tool Spindle, B-Axis: -Range: -20 / +90 Degree Y-Axis for Spindle Unit: -Stroke: 200 mm -Rapid Rate: 12 m/min -Feed Force: 6 kN C-Axis Main Spindle: -Positioning Accurace: 9" Nedsy Tybnopfx Alhjlc Multifunctional Tool Carrier: -Power: 29 kW at 100% ED -Power: 41 kW at 44% ED -Torque: 141 Nm at 100% ED -Torque: 212 Nm at 44% ED -Spindle Speed: 0-6000 min-1 -B-Axis for Stepless Motion in a Range Of: -20/+90 Degree Tool Magazine: -Maximum Tool Diameter: 100 mm -Approximate Tool Length: 300 mm -Approximate Tool Weight: 12 kg Swivel Loader: -Maximum Workpiece Diameter: 270 mm -Height: 150 mm -Weight: 16 kg

Condition: used, Year of construction: 1988, Distance between centres 1200 mm Nledpfx Alek Sat Djhec Speed A) 70 - 380 U/min. turning speeds B) 380 - 2000 U/min weight 2,2 t +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: excellent (used), Year of construction: 2021, operating hours: 7,950 h, functionality: fully functional, Vertical Turning Center / Vertical Lathe Manufacturer: EMAG Model: VL6 (FANUC) Year of Manufacture: 2021 Operating Hours: approx. 7950 Total weight : 10,5T Main spindle 28,5 KW Power at 40/100% ED 41/28,5KW Torque at 40/100% ED 491/340 Nm Full power at spindle speed 800 rpm Max. speed 3100 rpm Slide Unit X, Z HP Turret Drive Unit for Driven Tools (C362) with internal coolant supply to the tool Max. speed: 9600 rpm Full power at 3000 rpm Torque at 100% ED 33/Nm/10,4 kW Torque at 40% ED 44/Nm/13,8 kW Torque at 10% ED 56/Nm/17,6 kW Tool holder unit for driven tools: 12 x BMT65 Component storage and transport system conveyor, O-Type (GO 240") carrier prism system for 10 components Workpiece height : max. 250 mm Workpiece weight: max. 40 kg Set (10 pcs) of carrier prisms for workpiece diameter: 150 - 300 mm Blow-off Device for Workpiece and Clamping Device (Pick-Up) Coolant Supply: 15 bar Coolant pump capacity: approx. 80 l/min at 15 bar Cooling unit (6.5 kW, water - air) Coolant double filter, manually switchable Filtering fineness 100 μm, with electric and mechanical contamination indicator Swarf conveyor, chain type - rear discharge Hinged belt version: rear discharge Chip discharge height 1,100 mm (with integrated coolant tank, capacity approx. 500 l) Emulsion Mist Extraction: Extraction rate approx. 800 m³/h Rinsing gun Workpiece Measurement with Probe Probe blow-off Tool life monitoring (sister tool management) 3-Color Signal Tower Quick-Jaw changing chuck SMW autoblok KCNS-N400-128 max. = 3500 rpm Nedpfx Ajwzwu Ijlhjlc Set of hard base jaws Set of soft top jaws Software Package Operating Manual / Maintenance Manual

Condition: used, Year of construction: 2001, Technical details: spindle passage: 25 mm Nledotwglaspfx Alhjc Article: CNC sliding headstock automatic lathe Manufacturer: Tornos Type: Deco 2000/20 Year of construction: 2001 Control: Fanuc spindle diameter: D25 mm max. speed: 7000 rpm comb: 2 (X,Z,Y-axis) Front attachment: 1 (X,Z,S-axis) Loading magazine: Tornos Robobar SSF Chip conveyor: Hinged belt conveyor other: various accessories such as polygonal impact device, HF spindle Please, contact us for getting more information and pictures on mail(at) or *

Condition: used, Year of construction: 2019, turning diameter over bed 32 mm spindle passage 32 mm control SIEMENS 840-D-SL spindle stroke 220 mm main spindle speeds: 6000 U/min spindle drive 5,5 / 3,7 kW Sub - spindle - bar diameter 32 mm turning speed range sub spindle 8000 U/min turning length 220 mm collets 1536E motor power 5,5 / 3,5 kW total power requirement 16 kVA weight of the machine ca. 4,3 t dimensions of the machine ca. 6,40 x 1,60 x 2,10 m MAIER Swiss lathe in very good condition with SIEMENS 840-D-SL 3-channel control system, equipped with: Nledpfjytx Skox Alhoc - 2 counter spindles - NC C-axis on main and both counter spindles - Additional 3rd channel in the form of a second counter spindle - Channel 1 with Y1 and 4 driven tool holders - Channel 2 - Back side machining, tool carrier with 4 driven and 4 fixed tool stations - Tool holders for 4 fixed turning tool holders, cross-section 16 x 16 mm - Bar loading magazine, manufacturer FMB Turbo Ø 3-36 / 3200 C - Stack magazine for holding a complete bundle of bars - Chip conveyor - Electronic handwheel - KNOLL high-pressure system 50 bar with paper belt filter system - Fire protection system, manufacturer KRAFT & BAUER - Table for removing long parts - Removal of long parts (flange + pipe) - ARTIS - Tool and process monitoring “Genior Modular fully automatic tool and process monitoring” The machine can be inspected under power!

Condition: used, SECOND-HAND OLEO PNEUMATIC LATHE FOR TURNING AND SANDING OF SMALL WOODEN ELEMENTS LOCATELLI MOD. OMK 300 - Control panel - Automatic loader - Maximum working length 300 mm - Min / max working diameter 8/80 mm - Working stations: * automatic loader * turning with n. 2 gouges (roughing + finishing) * 1° shaped knife Nledpfxsrnq Rie Alhec * 2° shaped knife * unloading

Condition: used, spindle passage 12 mm Control Fanuc type LB 2 bar loader FMB weight of the machine ca. 1,4 t The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop Nlodpfx Asyt R Haelhoc If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: new, Year of construction: 2023, functionality: fully functional, center width: 390 mm, center height: 310 mm, overall weight: 61 kg, input voltage: 230 V, spindle speed (min.): 50 rpm, spindle speed (max.): 3,500 rpm, spindle mount: MK 2, power: 0.75 kW (1.02 HP), - Fully cast headstock, tailstock and support for smooth running. - User-friendly operation of the cast iron hand rest. - Induction motor with high torque even at low speeds. - Digital speed display. - Hardened steel edge of the hand rest. Nljdpfx Astuuv Nolhjc - 24-step division for locking the workpiece. - Storage compartment means you always have your tips to hand. - Drive-out mandrel and wrench for tightening the clamping disk. - Pre-drilled holes for lighting the headstock. - Easy mounting of accessories: stand, extension, lighting and mobile base frame. - Machine bed width is 160 mm! Medium-sized LAGUNA 1216 lathe is characterized in particular by its robust elements: Cast iron headstock, tailstock, precisely ground bench bed and tool rest with resistant edge made of hardened steel. Another highlight: ergonomic control panel made of anodized aluminium with duralumin speed control. Working speeds: 50-525, 325-1750, 650-3500 rpm. Stepless speed control with duralumin regulator and change between three gear ratios with a simple lever mechanism. The motor technology ensures high torque even at low speeds. Locking the tailstock at the rear: it does not interfere with work, but is still easy to reach. Ergonomic handles with eccentric lock for a very firm grip. - Type: REVO 1216 - Recommended use: Professional production - Power (230 V): 750 W - Speed: 50-525, 325-1750, 650-3500 rpm - Max. Machining diameter over guideway: 310 mm - Center distance: 390 mm - Spindle thread: M33 × 3.5 mm - Headstock / tailstock taper: MK2 / MK2 - Tool rest / tailstock bore: 17 / 17 mm - Quill adjustment: 63 mm - Hand rest shank size: 25.4 mm (1") - Length × width × height: 750 × 226 × 442 mm - Weight: 56.3 kg - Length x width x height: 750 × 226 × 442 mm - Weight incl. packaging: 61 kg - Packaging dimensions: 920 mm × 380 mm × 520 mm Scope of delivery: - Driver tip - center point - face plate - Hand rest - Punch with brass tip - Key for spindle lock

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 2760174, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Nsdpfxeyiarus Alholc Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 104440, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. Nedpfjyh Sc Njx Alhjlc No private sales.

Condition: excellent (used), Year of construction: 1999, Control: Siemens Sinumerik 840D Working range: max swing diameter: 300 mm Main spindle: Nlsdpevvmkiefx Alhsc minimum spindle speed: 28 rpm maximum spindle speed: 7000 rpm maximum torque: 188 Nm turning diameter: 1250 mm swing diameter: 1160 mm turning height: 800 mm faceplate diameter: 1000 mm

Condition: good (used), Year of construction: 2003, operating hours: 41,852 h, Workpiece Specifications: Max Swing Diameter: ~2500 mm (98.4 inches) Max Turning Height: ~2000 mm (78.7 inches) Max Workpiece Weight: ~10,000 kg (22,046 lbs) (depending on configuration) Spindle Specifications: Spindle Drive Power: ~50 kW (67 hp) (approximate, depending on model) Spindle Speed Range: ~10-500 rpm (variable, depending on model) Spindle Taper: Typically a large taper suitable for heavy-duty turning. Table Specifications: Table Diameter: ~2500 mm (98.4 inches) Table Load Capacity: ~10,000 kg (22,046 lbs) Axis Travel: X-Axis Travel: ~2000 mm (78.7 inches) Z-Axis Travel: ~2000 mm (78.7 inches) Tooling: Tool Holder Type: Typically VDI or similar heavy-duty tool holders. Number of Tools: Depending on the turret configuration, typically 12 or more tools. Accuracy: Positioning Accuracy: ~0.01 mm (0.0004 inches) Repeatability: ~0.005 mm (0.0002 inches) Nedpevy Ti Hefx Alhjlc Dimensions and Weight: Machine Weight: ~30,000 kg (66,139 lbs) (approximate) Machine Dimensions: ~5000 x 4000 x 4000 mm (196.9 x 157.5 x 157.5 inches) (approximate) Additional Features: Coolant System: High-pressure coolant system for efficient chip removal and cooling. Automation: Optional automation systems for loading/unloading of workpieces. CNC Control: Advanced CNC control for complex machining tasks.