Used Twin Screw Extruder for sale (8,181)

Condition: good (used), Year of construction: 2014, Compressor ALMiG VARIABLE 35 Screw Compressor Compressor ALMiG VARIABLE 35 Screw Compressor Pgodpfeyvgq Iex Ag Tsi Manufacturer: ALMiG Model: VARIABLE 35 Year of manufacture: 2014 Free air delivery: 1.00–6.05 m³/min Final pressure: 5–13 bar Motor power: 40.0 kW Motor speed: 1250–6500 rpm Serial number: F1410719 / S0030700 Quantity: 2 Location: Pforzheim

Condition: excellent (used), Year of construction: 2004, operating hours: 59,690 h, functionality: fully functional, Screw compressor Atlas Copco ZR90VSDFF Inverter and dryer integrated. 90 kW 8.75 bar 14.70 m³/min Pgsdpfx Aeyuvwaog Toi

Year of construction: 2023, condition: like new (used), functionality: fully functional, Our compact extruder model EX20-25d Manufacturer: PMH GmbH Screw diameter [mm] 20 Screw length [L/D] 25 Screw speed [min-1] 10-192 Screw nitrided Torque 55Nm Drive Three-phase drive with frequency converter Drive power [kW] 1.1kW Barrel material: nitrided Electrical connection values 3 / N / PE Supply voltage [V] 400V at 50 Hz Control voltage [V] 24V Ceramic heating tapes [W] 1200W Number of heating tapes 3 Max. Output approx. 5kg/h Max. Processing temperature [°C] 300 Pgsdpfxeq R Tkws Ag Toi

Year of construction: 1990, condition: excellent (used), functionality: fully functional, Reifenhäuser extruder Type: RH 51-1-35-25 5.6 kW DC motor 103 rpm Psdpfx Agewxvads Tsgi 500 bar melt pressure sensor 3 zone screw 35-25d fully functional You are welcome to view this (and other) extruders at our warehouse in Königswinter The machine can be switched on and demonstrated when empty. The screw has been removed and cleaned.

Year of construction: 2026, condition: new, functionality: fully functional, The laboratory extruder model EX20-25d is designed for small-scale material development, small batches, or filament extrusion. It has a plasticising capacity of 5kg/h. Our extruder model is designed with a bimetallic barrel and through-hardened screw, allowing for high-temperature processing (up to 400 degrees). This enables the processing of abrasive raw materials, engineering plastics, PEEK, metal compounds, ceramics, and fibre-reinforced materials. Pgedeiv H Ekepfx Ag Toi Inspect available machines at our factory in Königswinter. We can also provide machines in other dimensions.

Year of construction: 1997, condition: excellent (used), functionality: fully functional, machine/vehicle number: 7 / 8939 / 05 / 21, Used Reifenhäuser extruder Type: RH-241-1-50-30 WE DC-motor with 37 kW capacity screw dimensions : diameter 50 mm – 30 L/D Grooved feeding zone With manual screen changer Fully functional You are welcome for inspection this (and further) extruders in our warehouse Königswinter Pgsdpfow Np Tkjx Ag Tei The machine can be switched on and demonstrated when empty. The screw has been removed and cleaned.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 3.04-00054, power: 30 kW (40.79 HP), Equipment: type plate available, Used Bellaform extruder Type: BH45-30D Year of manufacture: 2013 With screw dimensions 45 mm - 30 l/d, screw speed approx. 160 rpm With 30 kW water-cooled servo motor, with gearbox Cylinder with 4 heating/cooling zones and water bushing in the feed area Material hopper plus a COLORTRONIC dosing screw for masterbatch A melt pressure sensor Control cabinet integrated into the machine frame, with factory-new PLC and With new touch panel for simple and intuitive operation This extruder has been functionally tested! Dimensions: approx. 195 x 70 x 200 cm (L x W x H with hopper) You are welcome to view this (and other) extruders at our warehouse in Königswinter The machine can be switched on and demonstrated when empty. The screw has been removed and cleaned. Pgjdpfxsuxa Abs Ag Tei

Year of construction: 1990, condition: excellent (used), functionality: fully functional, machine/vehicle number: 32531, Used Reifenhäuser extruder Type: RH 801-1-90-30 with one screw D = 90 mm - 30 L/D equipped with ceramic heaters and cooling air fans DC motor, power 103 kW Year of manufacture: 12/1990 Known plasticizing capacity: 250 kg with PP granulate The plasticizing capacity depends on the material and shape Fully functional You are welcome to view this (and other) extruders at our warehouse in Königswinter The machine can be switched on and demonstrated when empty. The screw has been removed and cleaned. Pgedpfxjw Np S To Ag Tji

Year of construction: 2026, condition: new, functionality: fully functional, machine/vehicle number: EX30, We have designed our compact extruder model EX30-28d so that it can be used in all extrusion processes. Pjdpfxeby Rfpj Ag Tsgi We offer this extruder as co-extruder or laboratory extruder, as well as for the extrusion of welding wire, filament, solid rods, hoses, or for pelletizing with hot die or strand pelletizer. We also realize other machine dimensions, please contact us. Our standard extruder with nitrided screw and barrel covers most polymer raw materials. Optionally, we also offer this extruder with wear-resistant screw and barrel, for example: for PEEK, titanium, ceramics, etc.

Condition: excellent (used), Year of construction: 2016, volume flow: 3.62 m³/h, operating pressure: 8 bar, Boge C 30 FD Screw Compressor Variable speed (inverter-controlled) With refrigerant dryer Motor: 22 kW Output: 3.62 m³/min Pressure: 8 bar Year of manufacture: 2016 Operating hours: 11,260 h COMPRESSOR IN FULL WORKING ORDER. Psdsywz Hmspfx Ag Tjgi

Year of construction: 2016, operating hours: 32,000 h, condition: ready for operation (used), overall weight: 1,100 kg, Single screw extruder manufactured in 2016. This Krauss Maffei KME 45 XS Extruder weighs 1,100 kg and operates at a voltage of 400 V with a total current of 235 A. The machine has undergone a motor conversion in 2023 and has a total of 32,000 operating hours. If you are looking to get high-quality extrusion capabilities, consider the Krauss Maffei KME 45 XS machine we have for sale. Contact us for further details. • Operating voltage: 400 V (3-phase) • Frequency: 50 Hz • Short-circuit withstand capability: 3 kA • Pre-fuse: 250 A • Total current: 235 A • Motor current: 48 A • Heating current: 68 A • Motor conversion: Performed in 2023 Pgjdoyu S Izspfx Ag Tei • Operating hours: 32,000 h

Year of construction: 2016, condition: ready for operation (used), Control Unit Brand MITSUBISHI Model M70 Podpfx Agsx D Ifto Tjgi Main Drive Number of axis 6 Spindle Speed 4000 RPM Technical Specification Counter Spindle yes Driven Tools yes This 6-axis Quick-Tech i60 twin was manufactured in 2016, featuring a CNC turning center with B-axis and driven tools. It includes a main spindle bore of 60 mm, sub spindle bore of 42 mm, and a maximum turning length of 300 mm. The machine offers 4-axis simultaneous machining, full axis programming, and a Mitsubishi M70 control system. Consider the opportunity to buy this Quick-Tech i60 twin horizontal turning machine. Contact us for more information about this machine. Application Types Turning

Condition: excellent (used), Year of construction: 2017, overall weight: 403 kg, volume flow: 2 m³/h, operating pressure: 13 bar, input voltage: 400 V, KTC KME 15 kW Screw Compressor Mounted on a 500 l pressure vessel Pgedpfxsyb Dbms Ag Tji With refrigeration dryer. 15 kW motor Capacity 2.00 m3/min Pressure 10 bar Year of manufacture: 2017

Condition: excellent (used), functionality: fully functional, PALLET CRUSHING LINE : 2 Shredder 2 conveyors with magnetic drum for nail removal. Used only 200 hours AMIS shredder and 30 hours RUBUST shredder. Pgedjyvhi Eopfx Ag Toi Like a new and good price.

Condition: used, nominal force 100 t stroke 320 mm no. of strokes 35 /min distance between columns 360 / 250 mm Distance table/ram, max. stroke up, adjustment up 500 mm table surface area 320 x 450 mm table height over floor 660 mm ram surface 250 x 280 mm spindle diameter 125 mm power capacity 3,0 kW weight 4,5 t Dimensions (WxDxH) 2,0 x 1,6 x 3,1 m only permitted for hot forming work high speed friction screw press with motor, friction screw drive Pjdpfx Asvuk N Tog Togi as is where is, WITHOUT putting into operation

Condition: like new (used), Year of construction: 1987, Used Giddings and Lewis Model MC 50 Twin Pallet Horizontal Machining Centre with Live Spindle, 60 ATC and G&L 8000A Control System. Serial # 445-1052.Year of Manufacture: 1987 Machine Formerly Installed at Rolls Royce Plc In Derby UK. Immediately for Sale and now Located in Belgium where it can be Inspected. Spindle Diameter - 130 MM Pgodeu Dahnopfx Ag Tsi Spindle Taper - 50 ISO Spindle Travel (Z Axis) - 915 MM Spindle Speeds (4 Ranges) - 5 to 1500 RPM Main Motor - 30 HP Pallet Size - 1219 x 1245 MM Pallet Rotation Increments - 0.001 DEG (360,000 POSITIONS) Pallet Changer Max Load - 5000KGS Pallet Max Load Without APC - 9000 KGS Longitudinal Travel (W) - 1700 MM Vertical Travel Of Head (Y) - 1500 MM Cross Travel (X) - 1800 MM Feed Rates Per Minute - 1.00MM/MIN TO RAPID RATE Rapid Traverse Rate Per Minute (X And Y) - 4500 MM / MIN Rapid Traverse Rate Per Minute (Z And W) - 3000 MM / MIN Auto Tool Changer - 60 POSITIONS Electrical Supply - 415V, 3PH, 50HZ FEATURES AND EQUIPMENT High Pressure (25 Bar) Through Spindle Coolant, High Tolerance Machine. Accurate Machine which was well Maintained and Regularly Calibrated by Manufacturer. Renishaw Probing. Length - 11679 MM Width - 6502 MM Height - 4423 MM Weight - 40329 KGS

Condition: excellent (used), Year of construction: 2004, Used Kia Model Kia Centre H63 Twin Pallet Horizontal Machining Centre with 60 Station ATC and Fanuc 18M Control. Serial Number KH630216. Year of Manufacture 2004. MACHINE CONSTRUCTION & FEATURES • One Piece Heavy Duty Cast Iron Bed Construction for High Accuracy & Rigidity • Heavy Duty Oil Cooled 2 Stepped Geared High Torque Spindle • Shuttle Type Pallet Changer • Pre-Tensioned Double Anchored Ballscrews • Fanuc 18M Control with 15 Inch Colour Screen • 20 Bar ‘Cool-Jet’ Through Spindle Coolant • Set of BT50 Toolholders • Filtermist FX5002 Mist Filtration • Frontal and Side Operators Platforms TABLE Table Size 630 X 630 MM Maximum Load Capacity 1,000 KGS Maximum Working Size Ø 1,120 X H 875 MM 0bwkk Minimum Index Angle 1° FEED X-Axis 950 MM Y-Axis 825 MM Z-Axis 760 MM Distance from Table Surface to Spindle Centre 175 ~ 935 MM Distance from Table Centre to Spindle Nose 0 ~825 MM Guide Type HARDENED & GROUND BOX GUIDEWAYS SPINDLE Spindle Taper NT #50 Podou A Ut Njpfx Ag Tsgi Spindle rpm 4,500 RPM Spindle Motor Output (Max/Cont.) 26.0 / 22.0 KW Spindle Torque (Max/Cont.) 1,267 / 1,071 NM Type 2 STEPPED GEARED HEADSTOCK FEED RATE Cutting Feed Rate X, Y and Z-Axis 5 M / MIN Rapid Feed Rate X, Y and Z-Axis 20 M / MIN ATC Number of Tools 60 Tool Type BT #50 Maximum Tool Diameter Ø 110 MM Max. Tool Diameter without Adjacent Tools Ø 245 MM Maximum Tool Length 600 MM Maximum Tool Weight 20 KGS Tool Selection Method FIXED ADDRESS Tool Change Time – Tool to Tool 6 SEC Tool Change Time – Chip to Chip 11 SEC APC Number of Pallets 2 APC Type SHUTTLE TANK CAPACITY Coolant Tank 400 L POWER SUPPLY Electric Power Supply 36 KVA Voltage 415V / 3PH / 50HZ MACHINE Floor Space (L x W) 3,610 X 5,320 MM Height 3,140 MM Weight 14,000 KGS

Condition: like new (used), Year of construction: 2007, HYUNDAI WIA KH63G - YOM 2008/ FIRST INSTALLED 2010 - SERIAL NUMBER G3641-071 MACHINE CONSTRUCTION & FEATURES • Twin Pallet Horizontal Machining Centre. • One Piece Heavy Duty Cast Iron Bed Construction for High Accuracy & Rigidity. • Heavy Duty Oil Cooled 2 Stepped Geared High Torque Spindle. • Shuttle Type Pallet Changer. • Pre-Tensioned Double Anchored Ballscrews. TABLE Table Size 630 X 630 MM Maximum Load Capacity 1,000 KGS Maximum Working Size Ø 1,120 X H 875 MM Minimum Index Angle 1° FEED X-Axis 950 MM Y-Axis 825 MM Z-Axis 760 MM Distance from Table Surface to Spindle Centre 175 ~ 935 MM Distance from Table Centre to Spindle Nose 0 ~825 MM Guide Type HARDENED & GROUND BOX GUIDEWAYS SPINDLE Spindle Taper #50,DIN 69871 Spindle rpm 4,500 RPM Spindle Motor Output (Max/Cont.) 26.0 / 22.0 KW Spindle Torque (Max/Cont.) 1,267 / 1,071 NM Type 2 STEPPED GEAR FEED RATE Cutting Feed Rate X, Y and Z-Axis 5 M / MIN Rapid Feed Rate X, Y and Z-Axis 20 M / MIN ATC Number of Tools 60 Tool Type ISO 50, DIN69871 Maximum Tool Diameter Ø 110 MM Max. Tool Diameter without Adjacent Tools Ø 245 MM Maximum Tool Length 600 MM Maximum Tool Weight 20 KGS Tool Selection Method FIXED ADDRESS Tool Change Time – Tool to Tool 6 SEC Tool Change Time – Chip to Chip 11 SEC APC Number of Pallets 2 APC Type SHUTTLE TANK CAPACITY Coolant Tank 400 L POWER SUPPLY Electric Power Supply 36 KVA Pgjdpfxjlrqiqe Ag Tji Voltage 415 V / 50 HZ / 3PH MACHINE Floor Space (L x W) 3,530 X 5,320 MM Height 3,106 MM Weight 14,000 KGS STANDARD SUPPLIED MACHINE FEATURES • Total Splash Guard • Door Interlock • APC (2 Pallets) • Remote MPG • Coolant Tank • Internal Chip Conveyor (2 Sets) • Work Light • Tapped Holes in Pallets • Levelling Pads and Bolts • Operation/Programming Manuals • Call Light • Selection of Spindle Tooling

Condition: used, Year of construction: 1990, operating hours: 50,000 h, functionality: unexamined, operating pressure: 10 bar, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, We are offering this used Atlas Copco GA 75 screw compressor, year of manufacture 1990. Manufacturer: Atlas Copco Model: GA 75 Year: 1990 Including dryer, oiler, and 2000L buffer tank. Pgjdpfjywyc Hox Ag Tei If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, functionality: fully functional, machine/vehicle number: Fuhrpark, empty load weight: 6,000 kg, maximum load weight: 20,000 kg, overall weight: 26,000 kg, axle configuration: 2 axles, first registration: 04/2018, tire size: 205 / 65 r 17,5, Further information Welded fine-grained steel construction, saddle plate with replaceable 2 king pins Reinforcer mounting point for gallows mounting and with sturdy grinding plates drum profile made of flat steel underneath the outer frame. Outer frame slightly inclined with Load-Lock profile for attaching tension beltsNote! To attach the belts in conjunction with drop sides, the drop sides must be opened! 24 to. 2-speed support winch, single-side operation, with straight lower section, without thrust compensation Wheel chocks with holder, aluminum side bumpers, offset inwards as far as technically possible, steel underride guard, as much ground clearance as possible, quarter-shell mudguards in front of and behind each axle, suspension strip for aluminum ramps at the rear, plastic toolbox, with shelf, w=620/h=360/t=440 mm, lockable with a padlock. (lock not included in scope of delivery) SAF drum brake axles, with axle stopsAxle distance 1600 mm, air suspension with lifting & lowering valve 205 / 65 R 17.5, twin steel rims, factory silver 2-line compressed air brake system, spring-loaded parking brake, 2 interchangeable front coupling heads, without connecting cable, EBS, electronic brake system with EBS socket at the front, without connecting cable, Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! 24 volt, multi-chamber lights, amber LED lighting integrated in outer frame profile at the side, offset inwards by approx. 25 mm, 10 lights per side 2 white position lights at the front, protected, 2 white/red lane departure lights at the rear, additional LED work light(s) at the rear, switched via reversing light 2 x 7-pin and 1 x 15-pin swap-proof sockets at the front, without connecting cable Pedpfsmp Ug Dex Ag Tegi Screen printing plates approx. 30 mm thick, for high point load capacity for forklift axle load up to max. 5,600 kg Special floor installation: test of new profiles, without bolting Steel/checker plate covering in the wheel arch area, front wall/front stanchions, 25 mm aluminum hollow profile, approx. 800 mm high, steel corner stanchions in volume design, with viewing windows on both sides. Approval country: Germany, with Dekra approval and certificate (according to §13 EG - FGV), 24/7 service hotline, prepared for single-line license plate holder, contour marking with reflective strips according to ECE R 048, white at the sides and red at the rear

Condition: refurbished (used), Year of construction: 2007, Refurbished Eurec S20.00 with Scania engine. Shafts and screen overhauled. New remote control. Serviced. 4800 operating hours. Pgsdpfxjyxxmme Ag Toi

Condition: excellent (used), Year of construction: 2006, operating hours: 32,000 h, Compressor in excellent condition, rewound motor. The machine is operational and tested. Technical specifications: Max pressure: 10 bar Power: 90 kW - 110 HP Capacity: 16,200 liters/min Podjxn Sw Iepfx Ag Tegi

Condition: like new (used), Year of construction: 2016, operating hours: 3,890 h, functionality: fully functional, INVERTER COMPRESSOR WITH INTEGRATED DRYER, LIKE NEW, ONLY 3890 HOURS. NEW LIST PRICE: EUR 56,199. MAIN FEATURES: MAX PRESSURE 13 BAR, OUTPUT 5100 L/MIN, POWER 26KW-35HP. Pgodjxnx Dhopfx Ag Tji

Condition: excellent (used), Year of construction: 2005, operating hours: 33,500 h, functionality: fully functional, Inverter compressor with integrated dryer. Fully functional. Approximately 23,000 operating hours. Main features: Podpfx Agjxvcdns Tegi Max pressure: 13 bar Power: 75 kW – 100 HP Output per min: approx. 12,500 l

Condition: new, Year of construction: 2025, atlas copco compressor (we are official dealers) with warranty. new and ready for delivery. super silent. possibility of combining external dryer (available). main features: max bar 10 power 11kw / 15 hp Psdpfx Aov Drq Rjg Tegi air flow liters / min 1500 list price euro 10517