Used Twin Screw Extruder for sale (8,642)

Year of construction: 2003, condition: good (used), functionality: fully functional, screw diameter: 27 mm, TECHNICAL DETAILS Capacity: 10 – 40 kg/h Screw and Barrel Technology Design: Synchronous Screw center distance: 23 mm Screw diameter: 2 × Ø27.0 mm Kneading disc and kneading block diameter: 27.0 mm Screw material: 1.2379 Cylinder diameter: 27.2 H8 Cylinder material: 1.8550 nitrided, nitriding layer 0.5–0.6 mm Screw length: 40 D Screw torque: 2 × 100 Nm Screw speed: max. 500 rpm Drive Drive type: DC shunt motor Drive power: 10.5 kW Motor speed: max. 2,690 rpm Gear ratio: i = 5.38 Power transmission: Clutch Heating and cooling system Number of heating zones: 11 Heating capacity: 9.85 kW Number of cooling zones: 9 Cooling type: ZIK (Intensive Cylinder Cooling) Filling zone cooling: Water Filling zone cooling water consumption: 30 l/h Bsdpjv U Da Ssfx Abzjww Process parameters Melt pressure: max. 300 bar Melt temperature: max. 350 °C Injection height: 1,050 mm Dimensions and weight Weight: approx. 950 kg Length: 2,630 mm EQUIPMENT - Segmented screws and barrels - Synchronized technology - Degassing

Year of construction: 1991, operating hours: 32,000 h, condition: refurbished (used), • One pair of original WEBER screws (excellent condition, including measurement report • One pair of non-original screws • Gearbox inspected and partially revised by WEBER Bwodpfjwaxuaox Abzew • Control upgraded to WPS control • Output on PVC around 700 kg/hour

Year of construction: 1994, operating hours: 32,303 h, condition: reconditioned (used), functionality: fully functional, Twin-screw extruder, second-hand Manufacturer: Reifenhäuser Type: BT 1000-2-63 K Year of construction: 1994 Machine no.: 32061 Operating hours: 32,303 hours Screw geometry: conical for PVC-hard profiles Screw diameter: 63 - 121 mm Screw length: 1300 mm Bodpfxowxvpfe Abzsww Screw speed: max. approx. 32 1/min. Nominal torque from gearbox: 1000 daNm Dynamic load rating of the back pressure bearing: 103600 daN Motor power: 43.0 kW, Drive motor: Baumüller DC motor Barrel heating/cooling zones: 4/3 (air cooling with fan) Adapter heating zones: 1 Tool heating zones: 5 Temperature control: digital temperature controller (2 x PSG Multipact 88) Max. permissible melt pressure: 500 bar Output: approx. 150 - 200 kg/h for rigid PVC profiles Accessories: Dosing device and material hopper Extrusion height: 1150 mm Dimensions: 4250 x 1200 x 1750 mm without hopper (LxWxH) Weight: approx. 3000 kg Condition: The machine came directly from production and was cleaned by us, repainted (RAL 7035, light gray) and checked for function.

Year of construction: 2000, operating hours: 30,500 h, condition: refurbished (used), - Type : CINCINNATI TITAN 68 - Year : 2000 - Conical screws - Analog controls - Screws & barrel : In good conditions - Flow rate: 250kg/h Bsdpoigrb Dofx Abzoww - Good general state We are able to supply all spare parts if required and provide on-site maintenance.

Year of construction: 2007, condition: ready for operation (used), functionality: fully functional, screw diameter: 27 mm, machine/vehicle number: DE27688, No reserve price - guaranteed sale at the highest bid! Bedsv Dkrajpfx Abzjww TECHNICAL DETAILS Screw diameter: 2 x Ø 27.0 mm L/D ratio: 40D Drive power: 33.6 kW Processable materials: PE, PP, PS, ABS EQUIPMENT - Co-rotating - Segmented screws and cylinders - Atmospheric degassing - Vacuum degassing including vacuum pump

Year of construction: 1993, operating hours: 1,04,599 h, condition: good (used), Brand Cincinnati Milacron Austria GmbH Bsdpfx Abevl Hzgezoww Type CMT 35 Machine number 2005723/10 Type Screw Conical Double Screw Year of manufacturing 1993 Machine hours 104,599 hours Screw Diameter 35mm Dimensions (LxWxH) 3200 x 1500 x 1720 mm Weight (approx) 2000kg

Year of construction: 2008, condition: refurbished (used), functionality: fully functional, Twin parallel screw extruder - Manufacturer: WEBER - Type: DS 8.22 Bodpfx Aewc Dhdjbzsww - Year: 2008 - Double parallel screws ø87mm 22D - 5 heating zones on the cylinder + 2 cooling zones - 5 tool heating zones - Engine power: 56kW - Up to 200kg/h profile - 300kg/h tubes Very good condition

Year of construction: 1998, operating hours: 64,082 h, condition: good (used), This Cincinnati extruder is in machine storage at Plastima Used Machinery. The machine is from 1999. Special note: the extruder lacks the gearbox. Bsdpfx Ajq Tr T Rjbzjww – Brand: Cincinnati – Model: Titan 45R-APC – Construction year: 1998 – Conical double screw extruder – Screw Ø: 45 mm – Working hours: 64.082

Year of construction: 2011, condition: ready for operation (used), Screw diameter: 59mm, screw rotational speed: 25-250/min, with complete documentation, control cabinet, screen changer, side dosing unit, granulator and additional accessories. Bodpjhtvmhofx Abzoww

Year of construction: 1989, condition: ready for operation (used), A conical twin-screw extruder Weber for PVC profile extrusion including cooling water basin, pull-out machine and a saw is available. Extrusion capacity: approx. 90kg/h, drive: 30kW, injection height: 100mm, temperature range: 0°C-300°C, motor power: approx. 20kW, controller: Philips Pastomatic, weight: approx. 1000kg. Documentation available. On-site inspection is possible. Bsdpfewu E Agex Abzeww

Year of construction: 2014, condition: ready for operation (used), General Data Measurements width 1125 mm Bwjdpfxsxg Ukhs Abzsw Measurements depth 2120 mm Measurements height 1960 mm Machine weight 1100 kg Main Drive Spindle speed range 2486 Injection Unit Screw diameter 45 mm This Krauss Maffei KME 45 XS was manufactured in 2014. It features a screw diameter of 45 mm and a length of 1350 mm, operating between 20-200 rpm. The machine includes five heating/cooling zones and a hopper volume of 0.1 m³. Ideal for those looking to enhance their extrusion capabilities. Contact us for more information about this machine. Application Types Extrusion

Condition: used, Used stainless steel twin screw cooling conveyer by AMF (Apener Maschinenbau und Forderanlagen Gustav Bruns GmbH & Co KG) model HDS 250 x 3500. Machine has two stainless steel screws with total length 3500 mm and working length about 3000 mm. Screws are driven by el motor 1.1 kW and reducer. Working rotation of screws up to 2.7 rpm. Each screw has a internal channel and is connected to cooling medium. Working pressure inside the shafts - up to 1.5 bar, temperature range from -10C up to +30C, volume - 2 x 18 l. Screws are working in jacketed tank. Width of tank 570 mm x length 3500 mm. Tank has volume about 430 l and is working on atmospheric pressure. Temperature range from -10 up to 0C. Tank has stainless steel jacket at bottom and side walls. Volume of jacket 40 l, working pressure up to 1.5 bar, working temperature range - from -10C up to +30C. Top of the tank is equipped with 3 stainless steel lids, each with lenght 90 cm. Cover under the section where discharge is located is equipped with inspection manway with diameter 30 cm and stainless steel round lid. Inlet to conveyer has dimensions: 30 cm x 55 cm. Outlet has dimensions 28 cm x 30 cm. Machine has local control panel and is mounted on 4 wheels. Last time used in food industry. Bsdoxputuspfx Abzsww

Year of construction: 1993, operating hours: 2,466 h, condition: good (used), machine/vehicle number: 330,2135,01, Brand: Leistritz AG Model: Micro 27/40 D Type screw: Double screw Bwsdpfeu Aqdkox Abzsw Year of construction: 1993 Screw Ø: 27 mm L/D Ratio: 40 Working hours: 2.466

Condition: ready for operation (used), K-tron T35 twin screw volumetric powder feeder with K-tron controller and one set of powder augers. Bwedjr Elk Rjpfx Abzsw

Condition: like new (used), OHK stainless hopper and screw Model: BTO Stainless 300Kg hopper with twin screw discharge, 200mm screw diameter, 3Ph Bwsdpfx Abeilhyhezew

Year of construction: 2006, condition: refurbished (used), functionality: fully functional, Starlinger Extruder - Screw diameter: 65 mm Bsdpfxehgq Aho Abzoww - Refurbished - Degassing zones - Filter / screen changer - Strand die Data sheet, see photos. Optionally with water bath & strand pelletizer, etc. We are available for any further questions. Commissioning and testing available upon request. In stock

Year of construction: 2016, condition: ready for operation (used), General Data Machine weight 320 kg Bedsxg Uknepfx Abzsww This Krauss Maffei KME 30-25 was manufactured in 2016. It operates on a 3-phase 400 V system with a frequency of 50 Hz. The total input current is 31 A, with motor and heating currents at 15 A and 16 A respectively. It's a robust single screw extruder ideal for consistent performance. Contact us for more information about this machine. Application Types Extrusion

Year of construction: 2007, condition: good (used), functionality: fully functional, machine/vehicle number: 1785-6201, Single-screw extruder Bsdpfxju Itqdo Abzoww

Condition: used, Used Buss extruder PLK 100 for sale. The extruder was used in the powder coatings sector. The extruder is fully functional Bwjdpfx Aovfd Uqsbzow

Condition: ready for operation (used), Twin screw gravimetric powder feeder with K-tron controller. Bodpfer Elkbjx Abzjww The listing is only for the gravimetric feeder. It comes with one set of augers.

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: 019, IDE single screw PVC extruder Bwjdpfx Ajxgh H Ajbzow

Year of construction: 2025, condition: ready for operation (used), General Data Machine weight 1100 kg Bwodpfxjxg Ukbe Abzew Main Drive Spindle speed range 2486 General Data Machine weight 1100 kg Main Drive Spindle speed range 2486 This Krauss Maffei KME 45 XS single screw extruder was manufactured in 2025. It features a 23 kW drive power, a maximum drive speed of 2486 rpm, and a screw diameter of 45 mm. The machine includes five heating/cooling zones and a maximum installed cylinder heating capacity of 10 kW. Ideal for high-quality extrusion capabilities. Contact us for more information. Application Types Extrusion

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: 035, Single screw PVC extruder Bwsdpexgh Dzofx Abzow

Year of construction: 2008, operating hours: 75,559 h, condition: ready for operation (used), Main Drive Spindle motor power 200.2 kW Injection Unit Screw diameter 75 mm Additional Equipment Connection to Measuring System: Connection for connection to INDEX wall thickness measurement Equipment for tool zones: EURO socket CEE 32 A - 6 H / 250 V, 3-pole blue Central main power supply Main Drive Spindle motor power 200.2 kW Bwjdow Spt Njpfx Abzow Injection Unit Screw diameter 75 mm Additional Equipment Connection to Measuring System: Connection for connection to INDEX wall thickness measurement Equipment for tool zones: EURO socket CEE 32 A - 6 H / 250 V, 3-pole blue Central main power supply This Krauss Maffei KME 75-36 R AC single screw extruder was manufactured in 2008. It features a KM-GM 750 control integration with meter weight and mass throughput control, and a capacity of up to 750 kg/h granulate. The machine includes a connection for INDEX wall thickness measurement and is equipped with a EURO socket CEE 32 A - 6 H / 250 V. Contact us for more information about this machine. Application Types Extrusion

Condition: used, Year of construction: 1994, functionality: fully functional, machine/vehicle number: 021, IDE PVC single screw extruder Bjdpfoxghy Njx Abzeww