Used Tying for sale (346)

Condition: good (used), CSF Fryer Bwjdpexr Rugofx Abzow Model BRN 3000 / 500 The fryer comes with an oil holding tank and pumping system for filling oil into and emptying oil from during deep-clean. Smaller tank inside the room that gravity drip feeds oil to the fryer to keep is continuously topped up. It was originally an electric fryer but was converted to thermal fluid heated. There is a little damage to the fryer hood, it doesn’t affect the fryer performance. Year of manufacture is 1987, its in perfect working order. Videos of it running available

Condition: ready for operation (used), functionality: fully functional, sliding table length 1500mm scoring unit fence with angle regulation Bwjdpjxhd Aiofx Abzsw max blade diameter 300mm spindle diameter 35mm spindle speed 3/4.5/6/8 tys. RPM connection 380V

Condition: excellent (used), Year of construction: 2023, operating hours: 1,851 h, functionality: fully functional, pressing force: 70 t, filling opening width: 1,100 mm, filling opening length: 1,400 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 500 kg, overall weight: 17,000 kg, oil tank capacity: 70 l, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Bwsdsu Thbxspfx Abzsw Type AVOS 1410 BS-22/50 Year of construction 2023 Pump operation hours 1,851 hours, as of July 24 Press power main press 70 t (a 70 tonne hydraulic cylinder is installed, special equipment) Specific press force 90,9 N/cm² (a 70 tonne hydraulic cylinder is installed, special equipment) Feed channel 1,400 x 1,000 mm Theoretic cycle time 13 sec Theoretic throughput capacity 266 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 22 kW Connected load 65 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 5,5 t/h bulk weight of 50 kg/cbm approx. 7,5 t/h bulk weight of 100 kg/cbm approx. 9,7 t/h Bale weight with a bale length of approx. 1.2 m up to 500 kg, depends on material SPS controller Siemens S7-1500 Operating panel Schneider Harmony Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport weight baler approx. 17 t Special equipment: Wear-resistant floor made of HARDOX steel Larger main hydraulic cylinder with 70 tonnes of pressing force Special press ram for pressing loose bulk materials with small grain sizes OptiCut XS system for lower cutting forces and higher throughput rates Special pressing piston for pressing "difficult" materials Technical data for the conveyor belt: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Deutschland Type KGF GB 1500 Year of construction 2023 Drive power 4.0 kW Belt speed approx. 0.3 m/second Length feeding conveyor 2,679 mm Length elevating conveyor 6,866 mm Length goose neck 1,272 mm Grade 35° Effecting width 1,400 mm Side wall height 800 mm Carrier height 50 mm Carrier distance 750 mm Belt quality EP 400/3, 3:1 (DIN quality N) Overall height 4,515 mm Overall transport dimensions11,148 x 2,502 mm (l x w) Technical data on the non-contact personal protection system: Manufacturer BOREMA Umwelttechnik AG, Switzerland Type APSS iBOR 22 Year of construction 2023 Condition of the press system: The entire system is in very good condition due to the short operating time of only 1,851 pump hours and the processing of only paper, cardboard and film. Scope of delivery: Avermann baler, type AVOS 1410 BS-22/50, incl. wire drawing stations and bale chute Avermann conveyor belt, type KGF GB 1500 BOREMA personal protection system, type APSS iBOR 22 Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: new, turning diameter 420 mm turning length 1500 mm swing diameter over bed slide 250 mm Swingdiameter in the bed bridge 590 mm centre height 210 mm Turning length in the bed bridge 260 mm reus 16 (45-1800) U/min tail stock MK 4 quill stroke 120 mm diameter of quill 50 mm spindle taper DIN ISO 702-2 Nr. 6 spindle bore 52 mm spindle cone MK 6 feed längs 17 / 0,05 - 1,7 m/min feed plan 17 / 0,025 - 0,85 m/min total power requirement 4,6 kW weight of the machine ca. 1340 kg dimensions of the machine ca. 2440 x 915 x 1375 mm Fully equipped master and feed spindle lathes. TH 4215 with digital position indicator DPA 21 / 3462070 - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 6 - Precisely crafted slide - Hand wheels with adjustable fine scaling 0.04 / 0.02 mm - Quadruple steel holder - All guides can be adjusted using V-ledges - Adjustment range top slide ± 90° - Guaranteed concentricity of the spindle nose better than 0.015 mm - Main spindle running in oil bath - Smooth-running gear wheels, hardened and ground with 2 adjustable Precision tapered roller bearings - Hand wheels decoupled and tested according to EN 23125 - Two-channel right-left switch tested according to EN 23125 - Switch with life cycle calculation, tested according to EN ISO 13849 - All metric pitches in the range 0.2 to 14mm/rev and all Inch threads in the range of 72 - 2 threads per inch without changing the Change gears adjustable by shift lever in the control panel - Clockwise/counterclockwise rotation can be switched on the bed slide via the switching spindle - Central lubrication in bed slide - Meehanite cast base and machine bed in one piece - Lead screw cover - Emergency stop device with foot control - Safety handwheels with snap-out function in the X and Z axes - Tailstock for taper turning adjustable ± 10 mm - Tailstock quill and hand wheel with adjustable fine scaling 0.025 mm - Quick, easy and tool-free adjustment using a clamping lever - Heavily ribbed prism bed, induction hardened and precision ground cast iron - Coolant device with separate coolant tank with level indicator and oil separator; easy and complete emptying and cleaning according to DIN - LED machine lamp in the chip guard Models TH 4210D and TH 4215D with digital readout DPA21 - User-friendly membrane keyboard, splash-proof, closed andglare-free - Glass scales scope of delivery - Fixed bezel passage Ø 15 - 145 mm - Revolving bezel passage Ø 10 - 75 mm - LED machine light - Reducing sleeve MT 6 / MT 4 Bwsdpek Egrpjfx Abzew - Fixed center MK 4 - Change gear set - Position stop with fine adjustment - Initial filling of the machine with quality oil - Operating tool Incl. special accessory OPTIMUM three-jaw lathe chuck centrically clamping Ø 250 mm Quick change holder SWH5-B set

Condition: used, BAG PACKING MACHINE Consists of: Weighing machine: make Wagner type WAMA-SP Compact, year 1995 Conveyor belt Bag emptying machine: DCE Sintamatic Bag sealing machine: Toss type 780 year 2002 * Bwodpfeu Nu Hvex Abzew

Condition: used, maximum load weight: 27,410 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 10/2015, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, PEISCHL Moving Floor +/- 90 cbm, Cargo Floor system with 21 slats, 8 mm thick, stainless steel wear plate at the rear under the moving floor, complete emptying system (sliding bulkhead), in/out push-pull function, double-wing rear door with rotary latch, front access ladder and working platform, sliding tarpaulin, side wall protection tarpaulin, ABS, EBS, SAF INTRA axle(s), 1st axle is a lift axle, disc brake system, air suspension with raise/lower device, aluminum drop supports, vehicle may be covered with advertising stickers and/or lettering. Bedpfxevnpqie Abzoww New brakes! Our offer is generally without new TÜV inspection. If you require a new TÜV inspection, we would be pleased to provide a quotation from our partner workshops! Vehicle may have advertising stickers and/or lettering. Our general terms and conditions of delivery and payment apply. We are happy to provide you with a financing or leasing offer for this unit. Please do not hesitate to contact us!

Year of construction: 2025, condition: new, Suitable for emptying containers of tuber vegetables and fruit. Technical Information • Output: 25 cycles per hour Bodpjw Ec E Hofx Abzeww • Load capacity: max. 1,000 kg per container • Power consumption: 2.2 kW, 230 V, 10 A • Container dimensions: 1,200×1,200×1,000 mm • Powder painted Dimensions: Length: 2,060 mm Width: 1600 mm Height: 1505 mm Weight: 415 kg

Condition: new, maximum load weight: 29,560 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 10,600 mm, loading space width: 2,480 mm, loading space height: 2,300 mm, loading space volume: 60 m³, Year of construction: 2025, Equipment: ABS, Buy, rent, or lease with an option to purchase! Approx. 60m³ STAS agricultural moving floor with integrated grain hopper / service door / slider for sample collection, etc. ----* Manufacturer: STAS * Type: FARMSTAR - Agricultural Moving Floor * First registered: - (New vehicle) * Color: Chassis + body RAL 7016 anthracite gray, roll-up tarpaulin SIO 7340 * Volume: approx. 60m³ (10.60m long x 2.48m wide x 2.30m high) * Axles: 3x SAF axles / 1st axle with lift axle + traction aid / disc brake * Tires: 385/65 R22.5 with Speedline Diamond aluminum rims * Wheelbase: 6.25m * Suspension: Air suspension with lifting and lowering Bjdpfxjwknz Rj Abzeww * Gross vehicle weight: 36,000 kg * Unladen weight according to manufacturer: 6,440 kg * Payload: 29,560 kg * ABS / EBS * CARGO FLOOR CF 500 SL-C with radio remote control and control console at the rear right * 21 floorboard system, 6mm ribbed * Welded aluminum end caps * Aluminum rear end plate * Integrated grain hopper * Additional guides below the floor profiles * Complete emptying wall with brushes and stainless steel handles * Front wall made of aluminum plank profiles * Service door in the front wall * Smooth side walls inside and out (grain version), welded through * Viewing window on the rear left side wall * Wing doors (50/50) * 4 locking rods * 2 slides for sampling (left and right) * Pivoting door cross member * Front hydraulic connections with 3 m hoses and * Connection option below the body without hoses * 1" female pressure * 1" female return port * Operator platform with access at the front left and right * Saddle height 1,150mm * Single fenders * Full-load supports * Roll-up tarpaulin (900g/m²) with quick-click system * Aluminum bow, foldable * Aluminum rear light guard (foldable) * Aluminum air tank * 1x toolbox, front left * 1x toolbox, rear right * Shovel and broom holder, left * 1x aluminum step ladder, 2x 8-step, attached to the right * 1x extendable ladder at the rear right * Smartboard * TPMS tire pressure monitoring * 5-chamber LED taillights * 2x LED work lights in front of the axles * 2x LED reversing lights at the rear * 1x LED work light on the inside of the bulkhead * 2 x 3 functional lights at the top of the door cross member Buy, rent, or rent with purchase option upon request! Note on possible errors in the advertisement: Despite careful preparation of this advertisement, isolated errors may have crept into the text or information. We assume no liability for errors, changes, or prior sales. All information is provided without guarantee. Please contact us to verify details or clarify any further questions.

Condition: good (used), Year of construction: 2019, operating hours: 673 h, functionality: fully functional, pressing force: 60 t, filling opening width: 1,100 mm, filling opening length: 1,400 mm, bale width: 720 mm, bale height: 1,100 mm, overall weight: 12,500 kg, oil tank capacity: 800 l, power: 37 kW (50.31 HP), Technical data baler: Manufacturer Riko Ekos d.o.o Type S-60K (5) Year of construction 2019 Operating hours 673 hours, as of August 24 Number of pressed bales 1,127 bales, as of August 24 Pressing force main press 60 tonnes Dimensions of feed chute 1,100 x 1,400 mm Filling volume / pressing cycle 2.1 m³ Bale dimensions 720 x 1,100 mm (W x H), the length is variable Drive power 37 kW Connected load, total 47 kW Tying 4-fold horizontal, fully automatic Throughput capacity with a bulk density of 30 kg/cbm approx. 5 - 6 tonnes/hour Bulk weight of 50 kg/cbm approx. 9 - 11 tonnes/hour Bulk weight of 100 kg/cbm approx. 15 - 19 tonnes/hour Filling volume of hydraulic oil tank 800 litres PLC control Siemens SIMATIC S7-1200 Siemens SIMATIC HMI control panel Press dimensions assembled without hopper and chute 12,220 x 3,654 x 2,685 mm (L x W x H) Effective transport dimensions excluding press, with dismantled tying system 7,230 x 1,750 x 2,685 mm (L x W x H) Transport weight press 12.5 tonnes Condition of the baler: The machine is part of a sorting line and was only partially used for pressing individual material flows. The machine is now no longer needed and has therefore been sold. However, the baler is regularly put into operation once a week for two to three bales so that the machine remains in working order. Due to the extremely low operating hours, the baler is in good condition and ready for immediate use. Bwsdou Thicjpfx Abzow Scope of delivery for the baler: 1 piece baler without conveyor belt, hopper and chute 8 pieces wire pulling stations, without wire 1 piece bale chute 1 set of machine documentation Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: new, fuel type: diesel, color: white, axle configuration: 4x2, fuel: diesel, driver cabin: day cab, gearing type: mechanical, emission class: euro3, loading space volume: 8 m³, Year of construction: 2025, The Mercedes-Benz Atego 1418 4x2 tanker is a reliable, efficient, and versatile solution for the safe transport of fuels. With its robust chassis, excellent performance, and well-designed safety features, this truck is perfect for fuel delivery in urban, regional, and remote areas. Specifications Mercedes-Benz Atego 1418 4x2 Fuel Tank: - Drive: 4x2 configuration, ideal for on-road and off-road use. - Engine: 4-cylinder in-line LA 132 kW (177 hp) - Transmission: Manual gearbox for optimal control and efficiency. - Load capacity: Suitable for medium loads, MAX. 14 tons. - Suspension: Front suspension 4.7T parabolic – Rear suspension 9.6T short trapezoidal 2-stage - Suspension: - Rear spring, 9.6T trapezoidal, short, 2-stage Fuel tank: - 8,000 ltr + 5% expansion volume - Fuel pump, capacity min. approx. 500 l/min at 5-6 bar - PTO engage/disengage from the cab, pump engage/disengage from the cab - Gravity drainage, via 2 inch with ball valve and cam-lock coupling. - Emptying with pump, via 2 inch with ball valve and coupling with cam-lock. - Top filling (hatch) - 2 x 3 m. - 2-inch pressure or filling hoses with cam-lock couplings. - Overflow valves, pressure regulator, and anti-static devices to ensure safety during use. Applications: - Delivery of fuel to gas stations. - On-site fuel distribution for agricultural and construction equipment. - Fuel transport in remote areas and difficult terrain. - Ideal for use in and around drilling rigs in cold and warm countries. Sustainability and Safety: The truck complies with international hazardous materials standards (ADR) and is equipped with robust safety features such as ABS, ASR, and fire protection valves. The Mercedes-Benz Atego 1418 4x2 tanker is a reliable and efficient tanker, ideal for the transport of liquid fuels. With a 180 hp engine and 4x2 drive, the Atego provides excellent agility and performance even in urban environments. Thanks to the tank capacity, it is suitable for transporting large quantities of fuel, while the advanced safety system ensures a secure and stable ride. This truck is the perfect choice for companies that want to transport fuels efficiently and safely. = Further information = Year of manufacture: 2025 Bodpfx Asxnblzjbzoww Usable material: Fuel Number of cylinders: 4 Pump: Yes Hoses: Yes

Condition: used, Technical details: Length: 1340 mm filling capacity: 600 Liter filling capacity: 0,6m³ Dimensions (LxWxH): 1,34 x 0,71 x 0,67 m Bwsdowprwgepfx Abzew 3 chip containers (blue) type PST; capacity = 0.6 m³ Tipping angle approx. 45° for emptying Base frame size 1000mm x 1000mm x 180mm Sheet metal construction 8 mm thick 4 eyebolts for crane lifting *

Condition: like new (used), Year of construction: 2024, operating hours: 200 h, Selling a puttying line consisting of a loading table, puttying machine, UV lamps, and unloading table. Bjdexd Tf Espfx Abzeww

Year of construction: 2025, condition: new, Suitable for emptying containers of tuber vegetables and fruit. Technical Information • Output: 25 cycles per hour • Load capacity: max. 1,000 kg per container • Power consumption: 2.2 kW, 230 V, 10 A • Container dimensions: 1,200×1,200×1,000 mm • Stainless steel Dimensions: Length: 2,060 mm Width: 1600 mm Bsdsv Sq Tyspfx Abzsww Height: 1505 mm Weight: 415 kg

Condition: used, maximum load weight: 24,830 kg, overall weight: 32,000 kg, axle configuration: 2 axles, first registration: 01/2007, loading space volume: 51 m³, Equipment: ABS, approx. 51,000 liters Heitling silo trailer for animal feed / 7 chambers / forced steering / aluminum rims ----* Manufacturer: Heitling * First registered: 01/2007 * Total weight: 32,000 kg * Empty weight according to vehicle registration document: 7,170 kg Bjdpfjq I H N Hsx Abzjww * Payload: 24,830 kg * Volume: 51m³ in 7 chambers (6.3m³/6.3m³/8.6m³/5.8m³/(5.8m³/8.6m³/9.6m³) * Axles: 2 x SAF / 2nd axle forced steering * Tires: 425/65 R 22.5 aluminum rims * Suspension: air suspension with lifting and lowering * EBS * Pressure tank 2 bar * 7 chambers * 7 Sliding lid * 7 udders * 6 floor emptying flaps NW200 with external control on the right * Discharge line NW80 to the rear * Solimar loosening * Access with walkway at the rear left * Central lubrication * Control box at the rear * Hose box left and right * LED work lights * LED reversing lights * Rotating beacon at the rear * Tool box on the left * Cyclone * Full load supports * Single fender German vehicle!! German papers!!

Condition: reconditioned (used), Year of construction: 1996, functionality: fully functional, pressing force: 170 t, filling opening width: 1,020 mm, filling opening length: 1,800 mm, bale width: 1,100 mm, bale height: 1,100 mm, overall weight: 40,000 kg, oil tank capacity: 3,000 l, year of last overhaul: 2024, For sale is a used baling press system consisting of a chain belt conveyor for underfloor operation, with a feed hopper, a hydraulic pre-compactor with whirlulator, a MACPRESSE 111A baling press, two complete wire drawing frames with 5 wire reel stands each, without wire. Technical data baler: Bsdju Th D Ropfx Abzoww Manufacturer MACPRESSE EUROPA S.R.L. Typ 111A Year of construction 1996, refurbished in 10/2024 Press power main press 170 tons Specific press capacity 14 kg/cm² Feed channel 1,800 x 1,020 mm Filling volume 2,5 cm³ Theoretic throughput rate 750 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 55 kW Tying system 5-fold horizontal, full automatic Throughput rate at a approx. 30 up to 35 tons/h, depends on material Volume hydraulic oil tank 3,000 l Transport dimensions of press with new machine feets 113,700 x 2,300 x 2,900 mm (l x w x h) Machine weight baler approx. 40 tons Comments: The baler was partially overhauled in our workshop and tested after completion of the work, please look at our functional video. The system was previously used to bale paper and cardboard from municipal collections. The contract was awarded elsewhere after the end of the contract period, so the complete system is for sale. The overhaul work carried out and the spare parts replaced can be found in the detailed photo documentation and in our quotation. The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors. Technical data conveyor belt: Manufacturer Wagensfeld B.V. Type chain belt conveyor 1700 mm Year of construction 2017 Drive power 7.5 kW Belt speed 14 m/minute Length of infeed conveyor 6,900 mm Length of ascending belt 12,885 mm Length of gooseneck 1,747 mm Overall length 21,271 mm Pitch 32° Effective width 1,644 mm Height of drive shaft above ground 5,777 mm Wall height of feed conveyor 500 mm Wall height of ascending conveyor 880 mm Steel flights height 40 mm Distance between flights 1200 mm Transport dimensions conveyor disassembled 15,005 x 2,503 x 2,435 mm (l x w x h) Pit dimensions 11,500 x 2,700 x 1,015 mm (l x w x d) Remarks: The chain belt conveyor, built in 2017, was later made to fit the baler during the last installation of the baler in the Netherlands and is newly installed. The conveyor belt is in good, operational condition and has therefore not been overhauled. An installation drawing with the pit dimensions is available. Scope of delifery: 1 chain belt conveyor, Wagensveld B.V. 1 piece feed hopper with pre-compressor flaps 1 piece wirbulator 1 baler MACPRESSE, type 111A 2 wire drawing frames with wire reel stands, without wire 1 operating manual with CE declaration, electrical and hydraulic circuit diagram

Condition: reconditioned (used), Year of construction: 2015, operating hours: 676 h, functionality: fully functional, fuel type: diesel, maximum load weight: 2,200 kg, empty load weight: 1,380 kg, Equipment: air conditioning, second-hand vehicle warranty, HAKO CITYMASTER 600 MULTIFUNCTIONAL 4x4 STREET SWEEPER from 2015 - EXCELLENT CONDITION INSTALLED EQUIPMENT: Two-brush sweeping system - NEW hard brushes with ACC wire are ideal for removing dirt from public roads, parking lots, and paths. Hydraulic controls from the cab allow for adjustable working widths from 1380mm to 1800mm, while the spray system binds loose dirt and prevents it from becoming airborne. Multifunctional tank - The versatile tank with a usable capacity of 600 liters, made of water-resistant (including salt-water), aluminum alloy, can be used for a variety of tasks, including collecting debris from sweeping, grass from mowing, and leaves. The tank can be used up to its maximum capacity. Emptying is easy thanks to hydraulic lifters that lift the machine and open the hatch – the process is fully automatic. Manual suction hose – Ø125mm mounted on a movable boom, the suction hose can be used as a vacuum cleaner, making it ideal for collecting leaves or smaller waste such as packaging or bottles. Air conditioning and heating – ensure high operator comfort even in high and low temperatures. Reversing camera – and an audible warning signal increase safety when working in public areas and on sidewalks. Work and spot lighting – Full road lighting allows for movement in public areas, complemented by optional workspace lighting for improved comfort in twilight and poor visibility conditions. Wiper with windshield washer, Bluetooth/USB radio. Warning light, horn, and pneumatic height-adjustable operator's seat. TECHNICAL DATA: Model: Citymaster 600 Year of manufacture: 2015 Sweeping module operating hours: 676 h Overall operating hours: 1865 h Total distance traveled: 9823 km Total sweeping distance: 1777 km Working width: 1380 mm - 1880 mm Dust tank capacity: 600 l / 500 kg Clean water tank capacity: 150 l Operating weight: 1380 kg Gross vehicle weight: 2200 kg DRIVE: Engine: Yanmar 3TNV88C-ZMHW - 1642 cm³ - Diesel Fuel tank (l): 41 Number of cylinders: 3 Power: 24.2 kW (32.91 HP) Engine speed: 2630 rpm max / 1900 rpm eco Torque: 104.8 Nm Forward / reverse speed: 25 km/h / 10 km/h Gradeability: 25% Hydraulic tank capacity: 35 l Hydraulic oil type: HVLP 46 DIMENSIONS: Length: 3899 mm Width: 1090 mm Width with brushes in transport position: 1380 mm Height: 2269 mm INCLUDED: REMANUFACTURED SUCTION NOZZLE WITH NEW GUARD RUBBERS AND NEW SUCTION TUBE LEADING TO THE TANK NEW 4m suction hose for the handheld vacuum cleaner, Ø125 mm Bodjxfazvspfx Abzeww NEW PPL 1.8 side brushes + ACC wire (2x) NEW KENDA 23X8.5-12 10PR TL E K500 Super Turf tires (4x) NEW 12V 72Ah starter battery NEW air, fuel, and oil filters with oil service NEW cabin air filter for the air conditioning Warning beacon Reversing camera, windshield wiper with washer, Bluetooth/USB radio, warning light, horn, and pneumatic height adjustment of the operator's seat

Condition: new, maximum load weight: 29,560 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 10,600 mm, loading space width: 2,480 mm, loading space height: 2,300 mm, loading space volume: 60 m³, Year of construction: 2025, Equipment: ABS, Stock no. 5640 Buy, rent, or lease with purchase option upon agreement! Approx. 60 m³ STAS agricultural moving floor trailer with integrated grain hopper / service door / sample extraction slide, etc. ---- * Manufacturer: STAS * Model: FARMSTAR - Agricultural Moving Floor * First registration: - (New vehicle) * Colour: Chassis RAL 9005, Body RAL 7001, Tarp SIO 7500 * Volume: approx. 60 m³ (10.60 m length x 2.48 m width x 2.30 m height) * Axles: 3x SAF axles / 1st axle is a lift axle with traction assist / disc brakes * Tyres: 385/65 R22.5 with Speedline Diamond aluminium rims * Wheelbase: 6.25 m * Suspension: Air suspension with lift and lower function * Gross weight: 36,000 kg * Unladen weight (manufacturer figures): 6,440 kg * Payload: 29,560 kg * ABS / EBS * CARGO FLOOR CF 500 SL-C with wireless remote control and control console at the rear left * 21-board floor system, 6 mm ribbed * Welded aluminium end caps * Rear closure plate in aluminium * Integrated grain hopper * Additional guides beneath the floor profiles * Residual emptying wall with brushes and stainless-steel handles * Front wall made of aluminium plank profiles * Service door in front wall * Side walls with smooth finish inside and out (grain version), fully welded * Inspection window on the left rear side wall * Double-wing doors (50/50) * 4x locking rods * Swivelling door end crossmember * Hydraulic connections at front with 3 m hoses and * Connection option underneath body without hoses * Pressure 1" female * Return 1" female * Operator’s platform with access at front left and right * Fifth wheel height 1,150 mm * Individual mudguards * Full-load supports * Roll tarp (900 g/m²) with quick-clamp system * Folding aluminium bows * Rear aluminium light protection (foldable) Bwjdpfjxl Ntujx Abzew * Aluminium air tank * 1x toolbox front left * 1x toolbox rear right * Shovel and broom holder left * 1x aluminium ladder (2x 8 steps) mounted right * 1x extendable ladder at rear right * Smartboard * TPMS tyre pressure monitoring system * 5-chamber LED tail lights * 2x LED work lights in front of the axles * 2x LED reversing lights at rear * 1x LED work light on inside front wall * 2 x 3-function lights at the top of the rear door crossmember Buy, rent, or lease with purchase option upon agreement! Note regarding possible errors in the listing: Despite careful preparation, errors may occasionally occur in the text or information provided. We accept no liability for mistakes, changes, or interim sales. All information is subject to change without notice. Please contact us to verify details or if you have further questions.

Condition: good (used), Year of construction: 2010, operating hours: 3,641 h, functionality: limited functionality, pressing force: 36 t, filling opening width: 1,100 mm, filling opening length: 1,080 mm, bale width: 1,100 mm, bale height: 750 mm, power: 15 kW (20.39 HP), empty load weight: 4,000 kg, volume flow: 90 m³/h, Technical data baler: Manufacturer Presto GmbH & Co. KG Typ CC 36 M Year of construction 2010 Hours of operation 3,641 h Press power main press 36 t Specific press capacity 467 N/cm² Feed channel 1.080 x 1100 mm (l x w) Cycle time 34 sec. Capacity per cycle time 0,85 m³ Theoretic throughput rate 90 m³/h Throughput rate under operating conditions with a material bulk density of 35 kg/m³ approx. 51 m³/hour Bale size 1100 x 750 mm (w x h), length variable Driving motor 15 kW Tying 4-fold vertical, semi-automatic, with polyester synthetic yarn Throughput rate at a bulk weight of 35 kg/cbm 1,8 to/h bulk weight of 60 kg/cbm 2,5 to/h bulk weight of 100 kg/cbm 3,1 to/h Transport dimensions only baler 4.200 x 1.640 x 2.200 mm Machine weight baler approx. 4 to Comments: The press was checked for function in our workshop, then stored and is therefore available at short notice. The machine documentation (operating ins3.641tructions, CE, electrical and hydraulic circuit diagram) is available. Bedeu Thh Eopfx Abzjww Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: good (used), Year of construction: 2015, operating hours: 19,173 h, functionality: fully functional, pressing force: 150 t, filling opening width: 1,100 mm, filling opening length: 2,000 mm, bale width: 1,100 mm, bale height: 750 mm, overall weight: 35,800 kg, oil tank capacity: 4,300 l, Technical data baler: Manufacturer Europress Umwelttechnik GmbH, Germany Type EP5 150 V5 Bwsdpou Thfdjfx Abzsw Year of construction 2015 Operating hours 19,173 hours Number of pressed bales 282,961 bales Number of press strokes from the press ram 1,895,112 press strokes Pressing force of main press 150 t Specific pressing force 181.8 N/cm² Dimensions of feed chute 1,000 x 2,000 mm (w x l) Bale dimensions 750 x 1,100 mm (h x w), length variable Drive power 2 x 55 kW + 15 kW + 2 x 0.75 kW Rated current 230 A Cable cross-section supply 120 mm² Tying 5-fold vertical, fully automatic Hydraulic oil tank capacity 4,300 l PLC control Siemens S7 / ET200S Transport weight press 35,800 kg Special equipment: Base plates and side walls made of HARDOX steel Free tamper in front of the counter blade, with cleaning cycle Scope of delivery: 1 piece baler 1 piece control cabinet 1 set of oil collecting pans under the baler 1 piece maintenance platform on the baling channel 1 piece Feed hopper 1 piece Drop chute 10 pieces wire reel stands 2 pieces wire drawing stations with deflection rollers 1 set of machine documentation (operating instructions, electrical circuit diagram, hydraulic circuit diagram, CE confirmation) Remarks: The machine is still completely assembled and available at short notice. Dismantling and loading is the responsibility of the buyer. The documentation (operating instructions, electrical circuit diagram, hydraulic circuit diagram, CE confirmation declaration) is available in German. An inspection is possible by arrangement. We do not assume any liability for the technical data and possible errors.

Condition: good (used), Year of construction: 2019, operating hours: 2,320 h, functionality: fully functional, pressing force: 60 t, filling opening width: 1,100 mm, filling opening length: 1,400 mm, bale width: 720 mm, bale height: 1,100 mm, overall weight: 12,500 kg, oil tank capacity: 800 l, power: 37 kW (50.31 HP), Technical data baler: Manufacturer Riko Ekos d.o.o Type S-60K (6) Year of construction 2019 Operating hours 2,320 hours, as of August 24 Number of pressed bales 4,359 bales, as of August 24 Pressing force main press 60 tonnes Dimensions of feed chute 1,100 x 1,400 mm Filling volume / pressing cycle 2.1 m³ Bale dimensions 720 x 1,100 mm (W x H), the length is variable Drive power 37 kW Connected load, total 47 kW Tying 4-fold horizontal, fully automatic Throughput capacity with a bulk density of 30 kg/cbm approx. 5 - 6 tonnes/hour Bulk weight of 50 kg/cbm approx. 9 - 11 tonnes/hour Bulk weight of 100 kg/cbm approx. 15 - 19 tonnes/hour Filling volume of hydraulic oil tank 800 litres PLC control Siemens SIMATIC S7-1200 Siemens SIMATIC HMI control panel Press dimensions assembled without hopper and chute 12,220 x 3,654 x 2,685 mm (L x W x H) Effective transport dimensions excluding press, with dismantled tying system 7,230 x 1,750 x 2,685 mm (L x W x H) Bwodpfxju Thipj Abzjw Transport weight press 12.5 tonnes Condition of the baler: The machine is part of a sorting line and was only partially used for pressing individual material flows. The machine is now no longer needed and has therefore been sold. However, the baler is regularly put into operation once a week for two to three bales so that the machine remains in working order. Due to the extremely low operating hours, the baler is in good condition and ready for immediate use. Scope of delivery for the baler: 1 piece baler without conveyor belt, hopper and chute 8 pieces wire pulling stations, without wire 1 piece bale chute 1 set of machine documentation Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: excellent (used), operating hours: 2,658 h, functionality: fully functional, pressing force: 71 t, filling opening width: 1,000 mm, filling opening length: 1,620 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 600 kg, input current: 200 A, oil tank capacity: 1,250 l, empty load weight: 29,000 kg, Technical data baler: Manufacturer BOA Recycling Systems B.V. Type M75-45-A-5-1.6 Ecoline Year of construction 2021 Hours of operation 2,658 hours (as of May 2024) Number of pressed bales 42,212 pieces (as of May 2024) Press power main press 71,2 kN (71 t) Specific press capacity 9 kg/cm² Operating pressure 280 bar Cylinder stroke 2,200 mm Feed channel 1,620 x 1,000 mm Capacity per cycle time 2,4 m³ Theoretic cycle time 21 seconds Theoretic throughput rate 450 m³/hour Bale size 1,100 x 720 mm, length variably adjustable up to 1,400 mm Driving motor 45 kW Bwsdpfx Asu Thcvobzew Connected load 100 kW Current consumption 200 A Tying system 5-fold vertical, fully automatic, the press stamp is prepared for an additional 3-fold horizontal binding Throughput rate at a bulk weight of 30 kg/cbm approx. 13,6 tons/hour bulk weight of 50 kg/cbm approx. 24,2 tons/hour bulk weight of 100 kg/cbm approx. 36,4 tons/hour bulk weight of 150 kg/cbm approx. 54,7 tons/hour Bale weight up to 600 kg, depends on material Volume hydraulic oil tank 1,250 l SPS controller Siemens S7 1500 Operating panel Siemens SIMATIC HMI TOUCH Transport dimensions of press 10,000 x 2,800 x 3,385 mm (l x w x h) Press height set up with feed chute 4,743 mm Press height with conveyor belt 7,123 mm Machine weight baler approx. 29 tons Noise level <85 dB (A) Condition of the baler: With 2,658 operating hours, the press is almost as good as new and in very good condition, has hardly any signs of wear and is ready for immediate use. Due to larger material input quantities, the pressing force and throughput of the machine no longer meet the customer's current requirements and is therefore being replaced by a new 120 tonne baler. Only the baler is for sale, without conveyor belt and wire drawing stations. Comments: The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: reconditioned (used), Year of construction: 2007, operating hours: 22,605 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,400 kg, input current: 238 A, overall weight: 36,000 kg, oil tank capacity: 1,300 l, For sale is a overhauled baler, with 100 tonnes pressing force, large format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding Technical data baler: Manufacturer Bollegraaf Typ HBC 110 K / 75 kW Year of construction 2007 Press power main press 100 tons Press power of pre-press 50 tons Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm Driving motor 75 kW Connected load 126 kW Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight up to 1400 kg, depends on material and bale lenght Volume oil tank approx. 1,300 l SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Baler dimensions built up with hopper 11,750 x 5,000 x 7,105 mm (l x w x h) Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h) Machine weight baler approx. 36 tons Comments: The press was partially overhauled and serviced in our workshop and tested and stored after completion of the work. The machine is available at short notice and can be inspected in our warehouse by appointment. Bodpfxovf E Avj Abzsww The following overhaul work was carried out: Rust removal and partial painting of the press. Remaining hydraulic oil tank drained, oil filter and air filter replaced. New hydraulic oil topped up. All hydraulic hoses replaced. Main hydraulic cylinder, two cylinders of the prepress flap and the cylinder of the press channel dismantled, disassembled, checked, cylinder tubes honed, all seal sets replaced and a final pressure test carried out. Disassembly of the prepress flap with bearings and bearing blocks. 1st and 3rd circular arc segmet cut out and a new one welded in again. Both bearings of the shaft of the prepress flap replaced. Upper material deflector on the frame of the prepress flap replaced. Press ram dismantled, checked and both front rollers replaced. Material deflectors and wear profiles on the sides and base of the press ram cut off and new ones welded in. Horizontal and vertical needle and tying unit dismantled, disassembled, checked, plastic sliding plates, bearings of the drill shafts and wire deflection rollers with bearings in the needle heads replaced. Both bronze slide rails on the left and right in the frame cover to the press ram replaced. Both wire deflection units on the left and right, with bale retaining clamps, completely renewed. Wire insertion unit including hydraulic cylinder under the needle feedthroughs completely renewed. Wire entry marks in the floor and side walls of the bale chamber welded shut and smoothed. General maintenance and service work carried out in accordance with the manufacturer's specifications. Press was tested in manual and automatic mode, accepted and stored after completion of overhaul work. We accept no liability for the technical specifications or any errors.

Year of construction: 2013, condition: used, We offer you a used PET bottle crusher of the manufacturer BOREMA, type R-1200 F, year of construction 2013, for residual emptying, deaeration and pre-compaction of the fed PET bottles, from 0.3 up to 2.5 l content. The machine has a chassis and can be moved into and out of the feed chute of your baler. The machine has a throughput capacity of approx. 85,000 bottles/h, corresponding to approx. 3t/h. We have the following technical information: Manufacturer: BOREMA Umwelttecjhnik AG Type: R-1200 F (with trolley for retracting and extending) Year of manufacture: 2013 Drive power: 11 kW Connected load: 15 kW Rated current: 32 A Back-up fuse: 40 A Type of construction: Continuous system Function: Double rotor press system Rotor pretension pneumatic: approx. 16t Overload protection: by anti-blocking system Input material: PET disposable and returnable empty bottles 0.3 to 2.5 L capacity Input material: HDPE bottles and canisters up to 3 l capacity Throughput capacity: approx. 3 t/hour, corresponding to approx. 85,000 bottles/hour, depending on size Required compressed air output: G1/2", 8 bar, 40 l/min. Compression ratio: 1:3 Flange dimensions inside: 972 x 1220 mm Feed opening: 565 x 1280mm Weight: approx. 2500kg Possible applications: Due to the chassis, the PET flattener can be moved into the feed chute of your baler as required, thus ensuring residual emptying, venting and pre-compaction of the fed bottles and canisters. When the material is changed, the PET flattener is simply moved out of the feed chute again and paper, cardboard, film, etc. can now be pressed further without using the flattener. Process of the BOREMA PET crusher: The plastic packages are drawn in by two rotating shafts. One of the rotating shafts is pneumatically pretensioned by two air bellows and presses the PET bottles with 16 t of pressure against the second rotating shaft. In the process, the closed plastic bottle is squeezed together, caused to burst and vented. Residual liquids run out and the material falls into the baler in a precompressed state. When impurities are introduced, the pneumatically pre-tensioned shaft deflects to the side and the impurities are channeled through. Significant advantages compared to conventional PET perforators with punching mandrels or knives: The BOREMA process is much more efficient and less subject to wear than conventional PET perforators with punching mandrels or knives. The biggest advantage is that any foreign matter such as metal parts, stones, bottles with frozen contents and pieces of wood are passed through the pneumatically deflecting rotor shaft without stopping the operation of the system or causing any major damage. With conventional perforators, mandrels or blades sometimes break off or become so jammed with the interfering material that the plant has to be shut down and repaired at great expense. Comments: Bjdpfx Aeu Thpnebzoww The crusher is in good condition, was dismantled from the running operation, stored, is available at short notice and after assembly immediately ready for use. The documentation (manual, CE, electrical/hydraulic circuit diagram) is complete. An inspection is possible by arrangement. The technical information is taken from sales brochures, the operating instructions or other information provided by the manufacturer. We accept no liability for incomplete or incorrect data and informations.

Condition: used, Year of construction: 2009, operating hours: 20,536 h, pressing force: 80 t, filling opening width: 1,100 mm, filling opening length: 1,400 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, empty load weight: 16,000 kg, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 20,536 hours, as of September 2024 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Bsdpfx Aju Thypobzjww Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport weight baler approx. 16 t Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Remark: The machine is currently in our workshop undergoing partial refurbishment. We expect the refurbishment work on the machine to be completed by the end of October, after which the machine will be tested and released for sale.

Condition: used, Year of construction: 2006, operating hours: 54,050 h, pressing force: 80 t, filling opening width: 1,020 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 750 kg, oil tank capacity: 2,100 l, power: 94 kW (127.80 HP), empty load weight: 21,000 kg, Technical data baler: Manufacturer Paal Typ Konti 275 E Year of construction 2006 Hours of operation in total 54,050 hours Press power main press 80 tons at 300 bar Specific press capacity 9,7 kg/cm² Feed channel 1,600 x 1.020 mm (l x w) Throughput capacity under operating conditions 350 m³/hour Bale size 750 x 1,100 mm, length variable Driving motor 75 kW Connected load 94 kW Rated current 180 A Tying system 4-fold vertical, fully automatic Bale weight up to 750 kg, depends on material Volume hydraulic oil tank 2,100 l SPS controller (manuf., type) Siemens Simatic S7-300 Operating panel (manuf., type) Siemens Multi Panel Bedpfxexcxm Ee Abzeww Transport dimensions only baler 11,152 x 2,152 x 3,000 mm (l x w x h) Machine weight baler approx. 21 tons Condition of the baler: The press and conveyor belt are in satisfactory working condition, see photo documentation. Further technical data and dimensions for the conveyor belt are not currently available. The plant is currently still in operation and is to be replaced by a larger press plant in the coming months. Scope of delivery: Bale press, bale chute, conveyor belt and machine documentation. Comments: The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Dismantling and loading is the responsibility of the buyer. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.