Used Tying for sale (335)

Condition: used, Year of construction: 2013, Please contact ATS Norway for more information Please provide reference number upon request: 19095 Specifications: - 2013 model - Km: 6192 - Hours: 1644 - 2m2 vacuum sweeper - 4 wheel steering - 2 brush system - high pressure washer - 40 km/h - Ready for delivery Description: An owner who has operated his own property/parking garage since new. Vacuum container leaks a little water when it is not pressurized. Kfjdpfxjv U Sg Hj Aanea The protective profile around the machine is rusted and needs to be replaced, rust water from this has discolored the plastic. The cable for the emptying lever return water is stuck, must be replaced/repaired. Some scratches/damage around the machine. For the most part, the machine is ok. Was in normal use until June 2024. Service carried out November 2023.

Condition: excellent (used), Tipper Tie Alpina mod SW 130-S bowl cutter, With tote bin lift + emptying arm Adjustable speed and bowl speed. 6 knife set up. Stainless steel bowl. Kfjdsx A A Rbspfx Aanoa

Condition: like new (used), Year of construction: 2022, functionality: fully functional, HOMAG EDGETEQ S-500 (OPTIMAT KAL 375/16/V25) Year of manufacture: 2022 Serial number: 0-200-73-4868 Excellent condition – used only for demonstration and sample production. The machine has been professionally maintained and is immediately available for inspection in Slovenia. Technical specifications and equipment: - Continuously adjustable feed speed: 16–25 m/min Kfjdpfxoxwurye Aanja - Workpiece thickness: 8–60 mm - Fixed fence on the left-hand side - Adjustable working height - Pre-installed for LOOPTEQ O-200 / O-300 return system - Feed lock system - Workpiece alignment at infeed with roller support - Top pressure unit - Sizing package with DIA joint trimming cutter set WD40 - Gluing package with preheating up to 60 mm thickness - Adhesive application system with emptying function - Edge magazine with two vertical roll holders - Pressure zone - PERFORMANCE2 package - End trimming unit PK25 - Rough trimming unit BF10 (I-HM straight cutter set) - Profile trimming unit FF32 top/bottom WD60 with FLEXTRIM quick-change system (2 radii) - Multi-scraper MN21 automatic with profile knife set - Cleaning agent spraying unit - Glue joint scraper FA20 BASIC - Buffing unit FP10 top and bottom - PowerControl PC23 PowerTouch control system - TAPIO Ready - Ethernet network connection - Wired manual control for setup operation - WOODCOMMANDER software package with MMR data logging, ToolManager, speed adjustment for track control, and full diagnostic functions - Documentation in Slovenian (digital and paper format) - Remote service enabled

Condition: used, Year of construction: 2025, operating hours: 21 h, functionality: fully functional, Powerful ride-on scrubber dryers in top condition for sale! The machine is in very good condition and ready for immediate use. Condition: Used, very good Operating hours: 21 hours Year of manufacture: 2025 SCHORR SCRUBBER DRYER 24V FLOOR MOP SCRUBBER 100AH SCRUBBER Efficient floor cleaning combined with extremely easy handling. Restore the shine to your hall! The fully electric ride-on scrubber dryer from SCHORR makes cleaning large hall areas much easier, especially due to the machine's excellent maneuverability. The steering angle is 90°, so pillars or narrow spaces, for example, are no problem. No special training is required to operate the machine. Simply fill it, get on, and drive off. With the built-in 100Ah batteries, intensive continuous use of approximately 4 hours is possible. The batteries are conveniently charged using the included charger at a standard 230V household outlet. SCHORR SCRUBBER DRYER RR1030FS – DISCOVER THE BENEFITS: -- Fully electric scrubber dryer with a 1030mm working width – ideal for large halls and rooms -- Up to 4500m²/h cleaning performance -- 80-liter fresh water tank and 85-liter waste water tank -- 510mm brush diameter -- Powerful 24V 100AH batteries -- Extremely robust and reliable Kfedpfxjwh Ri Eo Aanoa Technical Specifications Manufacturer (abbreviation): SCHORR Manufacturer's model code: RR1030FS Drive: Seated Suction motor power: 500W Brush motor power: 500W Drive motor power: 500W Operating time: approx. 4 hours Number of wheels: 3 Tires: PU (non-slip) Weight: 250kg Basic dimensions Volume Fresh water tank: 80L Dirty water tank volume: 85L Brush diameter: 510mm Overall length: 1400mm Overall width: 1030mm Overall height: 1100mm *Further technical specifications are available upon request. The ride-on scrubber-dryer is designed to be user-friendly, making the cleaning process as straightforward as possible. The intuitive control panel allows for easy control of all functions, so even inexperienced users can quickly get to grips with it. The ergonomic seat and clear view of the cleaning area allow you to work comfortably and efficiently. The large 80-liter fresh water tank and 85-liter waste water tank ensure long cleaning intervals without the need for frequent refilling or emptying. The machine is easy to maneuver and ideal for use in large areas. Of course, we usually have all spare parts in stock and can deliver them quickly should you ever encounter a problem. Should you need technical support, we have the necessary technical expertise and can also carry out repairs in our in-house workshop. We at SCHORR are happy to answer any questions you may have about our ride-on scrubber-dryer. You can reach our competent team by phone or email. We look forward to hearing from you and assisting you with your needs.

Condition: used, BAG PACKING MACHINE Consists of: Weighing machine: make Wagner type WAMA-SP Compact, year 1995 Conveyor belt Bag emptying machine: DCE Sintamatic Bag sealing machine: Toss type 780 year 2002 Ksdpfx Aju Nu Hveanjfa *

Condition: excellent (used), Year of construction: 2017, operating hours: 19,187 h, functionality: fully functional, pressing force: 140 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,500 kg, overall weight: 52,000 kg, Technical data baler: Manufacturer Bollegraaf Recycling Machinery B.V. Typ HBC 140 Year of construction 2017 Working hours 19,187 hours, stand October 2025 Press power main press 140 tons (max. 153,5 tons) Press power of pre-press 70 tons Feed channel 1,600 x 1,100 mm Capacity per cycle time 4,34 m³ Theoretic cycle time 16 sec. Bale size 1,100 x 1,100 mm Driving motor 2 x 75 kW Connected load 226 kW Full load current 428 A Tying system 5-fold vertical, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx. 30 tons/h bulk weight of 50 kg/cbm approx. 46 tons/h bulk weight of 100 kg/cbm approx. 82 tons/h Bale weight 800 up to 1300 kg, depends on material and bale lenght SPS controller (manuf., type) Telemecanique TSX Micro Operating panel (manuf., type) Schneider MAGELIS Touch Baler dimensions built up with hopper 13,200 x 27,000 x 7,344 mm (l x w x h) Kjdexrta Ejpfx Aanjfa Transport dimensions only baler 13.200 x 2.750 x 3.450 mm (l x w x h) Machine weight baler approx. 52 tons Technical data chain belt conveyor: Manufacturer Bollegraaf Typ HBT 1216 Year of construction 2009 Driving motor 7,5 kW Length feeding conveyor 6,750 mm Length elevating conveyor 14,400 mm Length goose neck 2,150 mm Grade 30° Effecting width 1,754 mm Height of side wall feeding conv. 500 mm Height of side wall elevating conv. 800 mm Weight 16 t Pit dimensions 10,000 x 3,200 x 1,200 mm (l x w x d) Comments: The press is currently in operation and is to be replaced by a new machine in the 2nd quarter of 2026. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Year of construction: 2019, condition: used, functionality: fully functional, machine/vehicle number: 19207555, This listing is for a tilting bratt pan from the premium manufacturer MKN, model Optima 850 Gas 3/1 GN, featuring motorized tilting. The unit has undergone a comprehensive inspection in our in-house workshop and is fully functional, with a 6-month warranty on all electrical components. The tilting bratt pan is in good used condition, free of defects, and is supplied mounted on legs. If required, the legs can be removed so the unit can be installed on a plinth. The manufacturer's RRP is €29,140 net. Our price: €8,394.95 net (€9,990 gross) Our used equipment service includes: 6-month warranty on all electrical components High-quality branded equipment at fair prices Professional refurbishment, inspection & expert cleaning Tested and fully functional – or your money back Flexible shipping or self-collection options Expert advice before and after purchase Provision of operating manuals, wiring diagrams, & spare parts Safety inspection according to DGUV V3 Technical data: Dimensions (W x D x H): approx. 1600 x 850 x 700 mm Pan internal dimensions: 1020 x 540 x 210 mm deep Kedpfx Aaexq D S Nsnefa Power supply: V: 220-240 / kW: 17 Model: 10019153 Serial number: 19207555 Year of manufacture: 2019 Rated capacity / usable capacity: 116 / 94 liters Condition: Used, fully inspected, fully functional Additional information: Optimized rated capacity: 116 liters Usable capacity: 94 liters The front pivot point of the pan and the shape of the pouring spout prevent spillage and ensure complete emptying 55 mm cleaning gap between pan and side frame Supplied as standard with double-walled hinged cover and mixing tap Pan bottom made from special sandwich material as standard for even heat distribution Thermostatic temperature control Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: NR810NEU, total length: 1,415 mm, sweeping width: 810 mm, empty load weight: 465 kg, construction height: 1,120 mm, drive type: Lithium-Ionen, construction width: 890 mm, Scrubber Dryer Chassis number: NR810NEW Condition: New machine Technical condition: New Front tyre condition: New Rear tyre condition: New Kfsdpjxglm Hjfx Aanja Battery voltage: 24V Battery capacity: 205Ah Battery type: Lithium-ion Battery year: 2025 Battery condition: New Description: - Efficient cleaning performance of 4,860 m² per hour. - Compact size with a low center of gravity, small turning radius, and flexible operation. - Integrated waterproof touch panel design; the LCD displays operating parameters and error codes, making parameter adjustment and fault diagnosis easier. - Three speed levels and adjustable water flow. - In-house developed controller with motor overload protection and low battery safeguarding functions, effectively extending motor and battery life. - An ECO mode reduces the vacuum motor’s output and noise level, ideal for noise-sensitive environments. - Electric one-touch lifting function for brush and squeegee holders; automatic squeegee lift during reverse driving for safety and efficiency. - Dual brush/pad design with innovative connection for easy brush or pad loading and unloading. - 120-liter fresh and wastewater tank capacity, reducing refill and emptying frequency. Automatic alarm for empty fresh water tank or full waste water tank. - Large opening on the removable waste water tank; tool-free design facilitates easy cleaning and maintenance. - Seat equipped with safety switch, causing the machine to automatically stop if the operator leaves the seat. - Non-slip, durable tyres provide secure grip and optimal traction even on smooth or wet floors.

Condition: used, axle configuration: 2 axles, first registration: 02/2002, loading space length: 13,600 mm, loading space width: 2,480 mm, loading space height: 2,620 mm, total length: 13,900 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 425/65R22,5, wheelbase: 9,040 mm, color: other, Year of construction: 2002, Equipment: ABS, = Additional options and accessories = - EBS = Notes = Number of axles: 2, Payload: 23,680 kg, Unladen weight: 8,320 kg, Gross weight: 32,000 kg, Type of chassis: Complete chassis, Chassis material: Steel, Kingpin size: 2 inch, Suspension type: Full air suspension, ABS, EBS, Body year: 2002, Axle type: BPW, 2-axle closed box semi-trailer. = Further information = General information Cab: Day cab Registration number: OG-35-TY Drivetrain Fuel type: Diesel Transmission Gearbox: Manual Axle configuration Tire size: 425/65R22.5 Brakes: Drum brakes Suspension: Air suspension Axle 1: Tire tread left: 13 mm; Tire tread right: 7 mm Axle 2: Tire tread left: 6 mm; Tire tread right: 6 mm Weights Empty weight: 8,320 kg Payload: 23,680 kg GVW: 32,000 kg Environment Emission class: Euro 0 Condition Overall condition: moderate Technical condition: moderate Optical condition: moderate Damages: none = Company information = Kleyn Trucks is one of the world’s largest independent dealers of used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our range includes all European brands, years of manufacture, and price categories. Why buy from Kleyn Trucks? Simple! • Large, fast-rotating stock • Recognizable quality • Good prices • Proper conduct of business • We speak many languages • We understand our customers • Assistance with import and transport • (Export) license plates are arranged quickly Kodpfjvr Dlpsx Aansfa • Expert technical services • The safety of ‘recognizable quality’ • And more… Please visit our website for special offers and our full inventory: Leasing via Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send us an inquiry via our website. Ask directly about our European warranty package.

Condition: new, Year of construction: 2024, SCHORR SCRUBBER DRYER 24V FLOOR MOP SCRUBBER 100AH SCRUBBING MACHINE Efficient floor cleaning combined with extremely easy handling. Bring back the shine to your hall! The all-electric ride-on scrubber-dryer from SCHORR makes cleaning large hall areas much easier, especially thanks to the machine's excellent maneuverability. The steering angle is 90°, so columns or narrow spaces, for example, are no problem. No special training is required to use the machine. Simply fill it up, mount it and drive off. With the 100Ah batteries installed, intensive continuous use of approx. 4 hours is possible. The batteries are conveniently charged with the supplied charger at a standard 230V socket. SCHORR SCRUBBER DRYER RR1030FS - DISCOVER THE ADVANTAGES: -- Fully electric scrubber dryer with 1030mm working width - ideal for large halls and rooms -- Up to 4500m²/h cleaning performance -- 80 liter fresh water tank and 85 liter waste water tank -- 510mm brush diameter -- Powerful 24V 100AH batteries -- Extremely robust and reliable Kedpfx Aaeuacy Aonsfa Technical data Manufacturer (abbreviation): SCHORR Type designation of the manufacturer: RR1030FS Drive: Seat Power suction motor: 500W Power: Brush motor: 500W Power: Drive motor: 500W Operating time: approx. 4 hours Number of wheels: 3 Tires: PU (non-slip) Own weight: 250kg Basic dimensions Fresh water tank volume: 80l Dirty water tank volume: 85l Brush diameter: 510mm Total length: 1400mm Total width: 1030mm Overall height: 1100mm *Further technical data available on request. The ride-on scrubber dryer is designed to be user-friendly to make the cleaning process as straightforward as possible. The intuitive control panel makes it easy to control all functions, so even inexperienced users can quickly get to grips with it. Thanks to the ergonomic seat and clear view of the cleaning surface, you can work comfortably and efficiently. The large 80-liter fresh water tank and 85-liter waste water tank ensure that long cleaning intervals are possible without the need for frequent refilling or emptying. The machine is easy to maneuver and is ideal for use in large areas. Of course, we usually have all spare parts in stock and can deliver them quickly if you do have a problem. If you need technical support, we have the necessary technical expertise and can also carry out repairs in our in-house workshop. Would you prefer to finance or lease the appliance? No problem! We also offer you attractive options for this. Simply contact us and we will advise you on the various options. We look forward to hearing from you! We at SCHORR will be happy to answer any questions you may have about our ride-on scrubber-driers. You can reach our competent team by phone or email. We look forward to hearing from you and being able to help you with advice.

Condition: good (used), functionality: fully functional, - During the pressing cycle, it allows filling of an additional chamber - Option to connect additional pressing chambers to increase the press capacity or for direct sorting of various types of material - Safe operation - Compact design - High compression ratio Technical specification: Weight: 555 kg Machine dimensions: 2000x850x1950 mm Filling hole dimensions: 750x550 mm Pressing chamber dimensions: 750x550x900 mm Filling height of pressing chamber: 1250 mm Pressing chamber volume: 0.4 m³ Bale size: up to 100 kg Kedpsxu U Ipefx Aanofa Hourly throughput: up to 300 kg Number of tying points: 3 Cycle time: 30 s Power supply/Voltage/Fuse: 1.5 kW/1x230 V/16A C

Condition: new, Year of construction: 2023, functionality: unexamined, fuel type: electric, color: dark red, empty load weight: 890 kg, total length: 1,970 mm, total width: 1,340 mm, total height: 1,480 mm, working width: 1,700 mm, battery capacity: 480 Ah, battery voltage: 48 V, area performance: 16,200 m²/h, discharge height: 1,470 mm, noise level: 84 dB, tank capacity: 350 l, Ride-On Sweeper RCM Sweep 100AHB – Powerful with High Dump up to approx. 147 cm. NEW! The RCM Sweep 100AHB is a modern, battery-powered ride-on sweeper designed for the efficient cleaning of large areas such as car parks. It is equipped with a hydraulic high dump system allowing emptying at heights up to approx. 147 cm – ideal for direct disposal into containers or collection bins. This machine is new, unused, and has only been stored. It is in excellent, like-new condition. Technical Data and Features - Model: RCM Sweep 100AHB - Year of manufacture: 2023 Kfodpfoxw Rnwsx Aanea - Operating hours: 0 h (new) - Drive: 48 V electric battery operation - Working width: approx. 1700 mm with two side brushes - Area performance: up to 13,940 m²/h - Debris container: 350-litre capacity - High dump system: hydraulic, with a dumping height up to approx. 147 cm – ideal for emptying directly into containers or bins - Complete with battery and charger included Condition: The machine is new, unused, and ready for operation. It has been technically inspected and shows no signs of use. Origin: The unit comes from an insolvency auction. This is a genuine RCM product, manufactured in Europe. Country of Manufacture: Italy Note: The technical information and descriptions are based on manufacturer details. All information is provided to the best of our knowledge, however, no liability is assumed for completeness, accuracy, or specific properties. The equipment is sold as described and seen; warranty and liability for material defects are excluded. Subject to prior sale, typing errors, and mistakes.

Condition: new, functionality: fully functional, Year of construction: 2025, CORMAK DC2200 Model The CORMAK DC2200 is a powerful and robust cyclone dust extractor, designed to efficiently purify the air in woodworking shops, furniture factories, and metalworking facilities. Thanks to its cyclone separator, high-performance radial fan, and modern filtration system, the machine ensures effective particle separation and long-term high efficiency. Main Advantages of the CORMAK DC2200 High extraction capacity – up to 2800 m³/h – effective removal of dust and shavings from multiple workstations simultaneously Cyclone separator – separates larger particles before the filter, extending its service life Powerful 2.2 kW (2200 W / 50 Hz) motor – stable and reliable continuous operation Kfedpfoxrdhaox Aansa Large 151-liter metal container – convenient and safe waste collection Filtration area of 4.8 m² – ensures high efficiency in capturing fine dust particles Compact, mobile design – sturdy frame with transport wheels for easy movement Quiet operation – optimized fan design reduces noise without sacrificing performance Design and Technology The CORMAK DC2200 is equipped with a 365 mm radial fan, generating a maximum static pressure of 2220 Pa. This allows efficient air suction through long ducting systems and multiple workstations. The extractor offers three suction inlets (3 × Ø100 mm) and one main inlet (Ø200 mm) for flexible setup according to the production area layout. The cyclone separation system effectively removes heavier particles at the inlet, directing only pre-cleaned air to the container. The cylindrical filter (Ø370 × 612 mm) ensures consistent airflow even during intensive operation. Performance and Ergonomics The DC2200 extractor is designed for daily use in small and medium-sized workshops. The 151-liter container (Ø620 × 570 mm) provides long working cycles without frequent emptying. With its compact dimensions (1320 × 900 × 1840 mm) and lightweight design (136 kg net), the unit fits easily into any workspace. Applications The CORMAK DC2200 is ideal for use in: Carpentry and furniture workshops Sawmills and wood-processing facilities Model-making and metalworking shops Production of composite and MDF components Standard Equipment Cyclone separator Cylindrical filter with large filtration surface 151 L metal container for dust and shavings Transport wheels Suction inlets: Ø200 mm and 3 × Ø100 mm Technical Specifications Parameter Specification Motor power 2.2 kW / 50 Hz Airflow (without filter) 2800 m³/h Max. static pressure 2220 Pa Fan diameter 365 mm Inlet diameter 1 × Ø200 mm / 3 × Ø100 mm Container volume 151 L Container dimensions Ø620 × 570 mm Filter surface area 4.8 m² Filter dimensions Ø370 × 612 mm Overall dimensions (L × W × H) 1320 × 900 × 1840 mm Weight (net / gross) 136 / 170 kg

Condition: used, operating hours: 15,418 h, mileage: 1,13,474 km, power: 206 kW (280.08 HP), first registration: 07/2012, overall weight: 18,000 kg, fuel type: diesel, color: orange, axle configuration: 4x2, maximum load weight: 8,500 kg, empty load weight: 9,500 kg, wheelbase: 3,620 mm, brakes: other, driver cabin: day cab, gearing type: mechanical, emission class: none, suspension: steel-air, number of seats: 2, Equipment: ABS, additional headlights, cabin, compressed air brake, cruise control, differential lock, fog lights, immobilizer system, onboard computer, parking sensors, power assisted steering, seat heater, soot filter, traction control, * German vehicle * From first owner * Genuine mileage only 113,474 km and 15,418 operating hours * Condition: See photos * SCARAB MAGNUM Hydrostatic * Disc brush on the right and central roller brush * SWEEPING WIDTH: 2365 mm single sweeping * Debris container 7.2 m³ with V2A stainless steel floor pan * Container tipping for emptying, controlled with cable remote control * Water tank 1,800 liters * Street washing system * High-pressure cleaner with lance on hose reel * Hydrostatic drive during sweeping * Sweeping speed from 0 to 32 km/h * Scarab CANbus control console displaying operational information, with data recording and self-diagnosis functions * Multifunction steering wheel * 6-speed manual transmission * Cruise control * Driver & passenger comfort seats, air-suspended * Seat heating * Electric windows * Electric mirrors * Rear view camera * Rear maneuver coupling * Beacon * Radio CD * Central lubrication system * Differential lock * Bluetooth phone connectivity * ABS and ASR * Leaf and air suspension with lifting and lowering function * Sun visor * Wheelbase: 3,620 mm * Gross vehicle weight: 18,000 kg * Unladen weight: 9,500 kg * Payload: 8,500 kg * Self-propelled road sweeper If a new TÜV inspection is required, we are happy to provide an offer from our partner workshops. Our offer generally excludes new TÜV inspection, new DGUV, new SP, and new UVV. Kfjdpfjxwx U Ejx Aanea You can find further trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend an inspection and assessment of the goods to avoid any misconceptions about their condition and suitability on the part of the buyer. Viewing and inspections are possible at any time by appointment and are expressly encouraged. All information is provided without guarantee. We do not accept liability for errors or incorrect details in the offer. The buyer is obliged to independently verify the condition and specifications of the goods/vehicles. Subject to alterations, prior sale, and errors.

Condition: excellent (used), Year of construction: 2017, operating hours: 13,284 h, functionality: fully functional, pressing force: 140 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,500 kg, oil tank capacity: 2,600 l, Technical data baler: Manufacturer Bollegraaf Type HBC 140 Year of construction 2017 Working hours 13,284, as of October 2025 Press power main press 140 tons (max. 153,5 tons) Press power of pre-press 70 tons Feed channel 1,600 x 1,100 mm (l x w) Capacity per cycle time 4,34 cbm Theoretic cycle time 16 sec. Bale size 1,100 x 1,100 mm (w x h), length adjustable Driving motor 2 x 75 kW Connected load 209 kW Tying system 5-fold vertical, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx. 30 tons/h bulk weight of 50 kg/cbm approx. 46 tons/h bulk weight of 100 kg/cbm approx. 82 tons/h Bale weight 850 up to 1.500 kg Hydraulicoil 2.600 l Univis N46 Baler dimensions with conveyor built up with hopper approx.13,200 x 24,200 x 7,333 mm (l x w x h) Transport dimensions only baler approx.13,200 x 2,884 x 3,539 mm (l x w x h) Machine weight baler approx. 51,810 tons Technical data feeding and elevating conveyor with gooseneck: Manufacturer Bollegraaf Typ HBT 1216/1800 * 23,300 30°/15° Year of construction 2017 Driving motor 7,5 kW Length feeding conveyor 6,750 mm Length elevating conveyor 14,400 mm Length goose neck 2,150 mm Grade 30° Effecting width 1,754 mm Height of side wall feeding conv. 500 mm Height of side wall elevating conv. 800 mm Transport dimensions feeding conveyor with one segment elevating part 9,816 x 2,500 x 2,242 mm (l x w x h) Kedpfsxpxhvox Aanjfa Transport dimensions elevating conveyor with goose neck 13,472 x 2,800 (without motor) x 2,729 mm (l x w x h) Pit dimensions 10,000 x 3,200 x 1,200 mm (l x w x d) Condition: The press is in very good condition and ready for immediate operation. The conveyor belt chain needs replacing. The system will be in operation until December 2025. Scope of delivery: baler with conveyor belt, maintenance platform, access ladder, two wire feed stations for 5 wire reels each (without wire), and bale slider. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: ready for operation (used), DIXI 60SLD is a semi-automatic baling system with a pressing force of 60 tons, designed for economical volume reduction of recyclable residues in industrial and craft sectors: - Cardboard boxes - Foams - PET bottles - Insulation mats - and other pressable materials Horizontal baler, DIXI 60 SLD waste press with tipping device Technical specifications: Pressing force: 60 tons Specific pressure: 6.81 kg/cm² Power supply: 400V / 7.5kW Bale dimensions: 800 x 1100 x 1200 mm Number of ties: 3 Bale weight: approx. 370–410 kg Tying: manual Feed opening: 990 x 1110 mm Machine weight: 5,420 kg Average pressing cycle: 47 sec Year of manufacture: 2011–2016 Dixi 80SLD Baler Technical Data of the Baler Brand: Dixi Model: 80 SLD Pressing force: 80 tons Drive power: 11 kW, 400 V / 32 A Feed opening (W x H): 1040 x 1110 mm Pressing cycle: approx. 35 sec Throughput: approx. 1,000 kg/h Bale size (W x H x L): 1120 x 1120 x 1200 mm Bale weight: depending on material, approx. 500–600 kg Bale tying: triple, manual Machine dimensions: Kfedpfxjra A E Ue Aansa Length: 4,200 mm (+cage 1,600 mm) Width: 1,830 mm Height: 2,620 mm Machine weight: approx. 8,000 kg Automatic bale ejection Robust construction for long-term use Year of manufacture: 2016–2020 Weight: approx. 8.4 tons Condition: Used

Condition: new, maximum load weight: 28,900 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 10,184 mm, loading space width: 2,550 mm, total width: 2,550 mm, total height: 3,722 mm, Year of construction: 2025, Equipment: ABS, Bodywork * Docking funnel 8" mounted at the upper rear, behind the tank, lockable with a manual slide gate * Direct idling at the rear side * Automatic pump shut-off * Lincoln centralized lubrication system for optimal time-based lubrication of slewing rings and axles (for drum brake 36P) * Bracket with two wheel chocks Pump * Vogelsang pump, capacity 6,000 L/min Axles * VALX axles with drum brakes, 9 tonnes, offset 0 Brakes * WABCO EBS braking system * WABCO tire pressure monitoring system according to R141 * TPMS system Axles * Forced-steering axles Tire size * 385/65 R22.5, 9 t Ksdpexmudnjfx Aansfa Tires * Brand: APOLLO Lighting * 24-volt lighting system * Side marker lamps with integrated flashing function * Work lights left and right at the first axle * Two LED work lights at the rear (one left, one right, mounted on the hose racks) * Two 7-pin connectors and standard 15-pin connector Accessories * Ball valves for complete tank emptying * Stainless steel vent container Paintwork * Tank painted RAL 7030 stone grey * Chassis painted RAL 7016 anthracite grey

Condition: new, power: 235 kW (319.51 HP), fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: white, gearing type: automatic, Equipment: air conditioning, crane, navigation system, MAN TGM 18.320 4x4 BB WITH PAVIC 3-Way Tipper Body AND FASSI F195A.2.24 A vehicle suitable for landscaping and horticulture, civil engineering, road construction, site operations, or as a municipal service vehicle! Vehicle: Kodoxnn Hfepfx Aanjfa * MAN TGM 18.320 4x4 BB crane tipper * CC driver’s cab: compact (narrow, short, standard height) * Wheelbase: 3,900 mm * Suspension: leaf/leaf * Drive: 4x4 * Tires FA: 2x 295/80R22.5 RA: 4x 295/80R22.5 * Gross weight: 18,000 kg * MAN PowerMatic 08 13 OD automatic transmission * MAN D0836 LFLAP diesel engine, 235 kW (320 HP) output, 1,250 Nm torque, Euro 6d * Transmission features: EfficientRoll + MAN Idle Speed Driving * Cruise control * Rear axle differential lock * Axial pump for hydraulics * Tipper operation control inside the cab * MAN EasyControl panel with 4 functions, operable from outside when door is open * Trailer coupling RINGFEDER type 4040/G150B * 2-line brake connection at rear of frame * Sun visor in front of windshield * Central locking with remote control * MAN Media System Navigation Advanced 7-inch * Online traffic for navigation * Smartphone integration * Heated, electrically adjustable rear-view and wide-angle mirrors * Driver’s comfort seat, air-suspended, with lumbar support, shoulder adjustment, and heating * Adjustable seatbelt height, driver’s seat * 2 work lights on cab roof * 2 halogen beacon lights on cab roof * And much more. Body: * 3-way tipper body 4200x2420 mm, manufacturer: PAVIC * Headboard height: 800 mm * Sideboard height: 600 mm * 8 fully recessed lashing rings in floor (4 per side) * Material: Hardox 450 * Support for horizontal laying of sideboard with rubber pad (for long materials transport) * Spring-assisted sideboards for easier opening and closing * 2 lashing points on headboard (for tying down a compactor or grapple, etc.) * Tipper body hot-dip galvanized, sideboards, etc. painted fully in 2K truck paint, RAL9016 * Subframe galvanized and painted in RAL 9011 * Left and right sides single-piece, openable on both sides pneumatically with air valve from the cab, all sides can be opened from below (pendulum type), manually from above, removable mid-stakes. * Spring-assisted sideboards for easier opening and closing * Additional body equipment: Pre-prepared locations in the pillars allow for later installation of a leaf grille (side extensions PLUS 500 mm for, e.g., transport of trimmings) Loader crane: Fassi F195A.2.24 (Hydraulic 4-stage extension) FASSI F195A.2.24 e-dynamic * Lifting moment: 162 kNm (16.51 mt) * Hydraulic four-stage outreach: 12.7 m * e-dynamic hose equipment for 2 auxiliary devices * Slewing range: 400° * Dual linkage system with PROLINK (overbending knuckle arm up to 15°) * Electronic overload protection with FX 500 * FASSI Stability Control FSC including LMB II * Fassi RCS radio max - 6 functions with 3 joysticks (2-2-2) * Special outriggers, support width 6.64 m, hydraulically extendable incl. FSC * Outriggers operable via remote control * FL-System (Full Lift) engageable rapid-action valve for extensions * LED work lights Financing / hire purchase as well as leasing / partial amortization leasing is possible with our leasing partner. For further questions, our sales team will be happy to assist you. This is a non-binding offer. Subject to prior sale, errors and modifications.

Condition: used, Year of construction: 2025, operating hours: 86 h, Compressed air | Knives: 25 | Pickup-hydraulic | Pickup support wheel | Roller hold-down | Claas Rollant 630 Uniwrap Year of manufacture: 2025, currently 422 bales pressed (as of 26.06.2025) Technical specifications: - Baler-wrapper combination with 1.25 m chamber diameter - Chamber width 1.20 m MULTIFLOW pickup: - Pickup width 2.10 m - Gauge wheels, pendulum mounted, with 16x6.5-8 tyres - Dual feed augers PRO cutting floor: - Hydraulic suspension and lowering cutting floor to prevent blockages - Operation via terminal including optical and acoustic signals ROTO CUT cutting rotor: - Cutting rotor with four spirally arranged tine rows - Individually protected knives against foreign objects - Hydraulic knife group selection Chamber: - 16 profiled steel rollers - Rear door with hydraulic locking - Greasable baler roller bearings Wrapping unit: - Fully automatic control - Twin wrapping arms with 750 mm film pre-stretchers - Wrapping speed max. 36 rpm for 6 layers of film in 23 seconds - Terminal for direct access at the wrapping table - Hydraulically lowerable film magazines for 12 spare rolls - PROFI CAM camera and work light for wrapper illumination - Continuous chain lubrication - Hand wash tank incl. soap dispenser - Hydraulic requirements: load-sensing and 1 x single-acting Equipment: MULTIFLOW Pickup HD with twin roller hold-down Dummy knives, set of 25 ROTO CUT cutting rotor with hydraulic swinging PRO cutting floor, 25 knives PREMIUM LINE knife set, 25 pieces Film pre-stretch 82% Bale transfer guide ROLLATEX net tying Single wide-angle PTO shaft with cam-type clutch, 6-piece Tractor hydraulic connection, comfort Adjustable support stand Hydraulic/electronic ROTO CUT swinging floor Kjdpfxswvwtas Aanefa K80 ball head hitch, MR Tyres: 600/55 R26.5 Dual-line compressed-air brake system, up to 40/50 km/h LED high-end work lights including service lighting Screen for PROFI CAM CEMIS 700 Automatic central lubrication system, electrically actuated Extended tool set | Internal no.: 11264178

Condition: used, operating hours: 5,485 h, mileage: 98,662 km, power: 118 kW (160.44 HP), first registration: 03/2014, overall weight: 11,400 kg, fuel type: diesel, color: white, axle configuration: 4x2, maximum load weight: 5,500 kg, empty load weight: 5,900 kg, next inspection (TÜV): 06/2025, wheelbase: 1,800 mm, brakes: other, driver cabin: other, gearing type: other, emission class: euro5, loading space volume: 5 m³, number of seats: 2, Equipment: ABS, air conditioning, cabin, onboard computer, parking sensors, power assisted steering, soot filter, * German vehicle * 1st hand * Currently, 18,000€ have been invested in the technology this year 2024 (invoices available) * Condition see photos * TÜV until 07/2025 * only 5,965 operating hours * 3 disc brushes * Top speed 50 km/h * Movable brush system * This means up to 3.40 m working width * Pre-spray device * Joystick operation * 5m³ stainless steel waste container * Emptying height 850 mm * Rear view camera * Air-suspended comfort seat * Air conditioning * LED work lights * EasyDrive (hydrostatic drive) (SN) * Iveco 4 cylinder diesel engine * 118 KS/ 160 HP * 3,920 cc * Rotating beacons Kfjdpfx Ajvhqn Noanoa * Stereo CD * Diameter of suction pipe 225 mm * Diameter Disc brush 750 - 900 mm * 600 l. water tank * 120 liter diesel tank * GVW 11,400 kg * Empty weight 5,900 kg * Payload 5,500 kg If you require a new TÜV inspection, we will be happy to provide you with an offer from our partner workshops. Our offer is generally WITHOUT a new TÜV inspection, without a new DGUV, without a new SP, without a new UVV.  You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note:  We offer and strongly recommend an inspection and testing of the goods so that the buyer does not have any false ideas about their quality and suitability. Inspections and tests are possible at any time by appointment and are expressly desired.   All information is without guarantee. We are not liable for errors and incorrect information in the offer. The buyer is obliged to check the condition and equipment of the goods/vehicles for themselves. Subject to changes, prior sale and errors. - .

Condition: new, functionality: fully functional, fuel type: gasoline, color: black, operation weight: 84 kg, Technical specifications: Condition - NEW! Catalog number: 1.049-221.0 Drive type: Gasoline Drive: 4-stroke engine Engine manufacturer: Kohler Drive power (W): 3300 Max. area performance (m²/h): 3375 Working width (mm): 550 Working width with 1 side brush (mm): 750 Sweep hopper (l): 40 Gradability (%): 15 Working speed (km/h): 4.5 Filter area (m²): 1.8 Weight, ready for operation (kg): 84 Dimensions (L × W × H) (mm): 1430 x 750 x 1190 Kfodexqd Epspfx Aanea Scope of delivery and equipment: *Standard main brush - Robust standard main brush with water-resistant universal bristles for normal dirt on all surfaces. Long service life. *Standard side brush - Water-resistant universal bristles, long service life, suitable for all surfaces. *Flat pleated filter - Water-resistant, washable flat pleated filter for Kärcher sweepers. This filter significantly reduces maintenance costs. Features: Manual filter cleaning Forward drive Adjustable main sweeper roller Mobile sweeping hopper Coarse debris flap Foldable push bar Overhead sweeping principle Suction Powerful drive Outdoor use Suction flow control Liftable/adjustable side brush Advantages: - Sweeping hopper with trolley handle - Convenient removal and easy emptying of the hopper thanks to recessed grips. Short disposal times. - Powerful filter system with mechanical filter cleaning - 1.8 m² filter surface for long work intervals. Long durability thanks to washable polyester material. Mechanical filter cleaning with ergonomic handle. - Easy to maintain - Tool-free changing of filter and sweeping roller for flexible, location-independent maintenance.

Condition: new, maximum load weight: 28,240 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,500 mm, loading space width: 2,480 mm, loading space height: 2,820 mm, loading space volume: 91 m³, Year of construction: 2025, Equipment: ABS, Stock no. 5559 New vehicle in stock – available immediately! Purchase, rent, or rent with purchase option by arrangement! Side tarpaulin retrofit available at an additional cost! Stas 91 m² moving floor / 10 mm flat floor / TÜV load certificate ---- * Manufacturer: Stas * Model: BIOSTAR – moving floor * First registration: - (New vehicle) * Colour: Chassis galvanized, body RAL 7016 silver grey, tarpaulin SIO 7340 * Volume: approx. 91 m³ (13.50 m long x 2.475 m wide x 2.64 m to 2.82 m high) * Gross weight: 36,000 kg * Unladen weight (as per registration): 7,760 kg * Payload: 28,240 kg * Axles: 3x SAF axles / 1st axle lift / traction assist / disc brakes * Tyres: 385/65 R22.5 new on Speedline Diamond alloy wheels * Wheelbase: 7.85 m Kfodpfx Aajv Emk Uenja * Suspension: ECAS air suspension with raise and lower function * ABS / EBS * Cargo Floor CF 500 SL-C floor with remote control and control panel at rear left * 21 floor planks, 10 mm flat * 12 pairs of recessed lashing rings in floor * Welded aluminium end caps * Residual emptying wall with brushes and stainless steel handles * Service door in front wall * Swing doors (50/50) with pneumatic locking * 2x locking rods * Swingable rear door cross member * Hydraulic connections at the front with 3 m hoses and * Additional connection beneath body without hoses * Control platform with steps at front left * Fifth wheel height: 1,150 mm * Single wheel fenders * Full-load support legs * One-piece, foldable aluminium rear light guard * Roll tarpaulin (900g/m²) with tension belts * Foldable steel hoops and longitudinal tension belts * 1x toolbox at rear left * 1x aluminium ladder, 3.80 m long * Load pressure gauge * Smartboard * TPMS tire pressure monitoring * Aluminium rear impact guard * 1x extendable ladder at rear right * 2x LED work lights in front of the axles * 2x LED reversing lights at rear * 1x LED work light on interior front wall * 2 x 3-function lamps on upper rear door cross member New vehicle in stock – available immediately! Purchase, rent, or rent with purchase option by arrangement! Notice regarding possible inaccuracies in the listing: Although this listing has been carefully prepared, errors or inaccuracies in the information may occur. No liability is accepted for errors, changes, or prior sale. All information is non-binding. Please contact us to verify details or clarify any questions.

Condition: excellent (used), Year of construction: 2002, operating hours: 66,568 h, functionality: fully functional, pressing force: 71 t, bale width: 1,100 mm, bale height: 720 mm, bale weight: 600 kg, oil tank capacity: 800 l, power: 45 kW (61.18 HP), operating pressure: 280 bar, Technical data baler: Manufacturer BOA Type 2040.S. 4V (6) 71.30 Year of manufacture 2002 Operating hours approx. 66,568 hours, as of October 2025 Effective pump running time 13,614 hours, as of October 2025 Number of bales pressed 139,167, as of October 2025 Pressing force main press 71 t Specific pressing pressure 9.0 kg/cm² Operating pressure 280 bar Dimensions of feed chute 1,620 x 1,080 mm Bale dimensions 1,100 x 1,100 mm, length variably adjustable 800 up to 1,600 mm Drive power 45 kW Tying system 4-fold vertical, fully automatic Throughput rates for quality: Bulk density 20–30 kg/m³, throughput capacity up to 9 tonnes/hour Bulk density 40–60 kg/m³, throughput capacity up to 16 t/hour Bulk density 80–100 kg/m³, throughput capacity up to 21 t/hour Bulk density 100–150 kg/m³, throughput capacity up to 28 t/hour Bale weight up to 600 kg/bale, depending on material Hydraulic oil tank capacity 800 l Transport dimensions 10,020 x 2,060 x 3,250 mm (l x w x h) Machine weight press approx. 26 t Noise level <90 dB (A) Technical data for the chain belt conveyor: Manufacturer BOA Type 1500 HS 29° KTH 3000 *13625 * 1500 Kfjdpfoxmk Ivex Aanea Year of manufacture 2002 Drive power 7.5 kW Length of feed belt 2,600 mm Length of incline belt 13,625 mm Length of gooseneck 1,500 mm Incline 29° Useful width 1,425 mm Overall height of conveyor belt 7,065 mm Height of side wall of feed belt, inside 500 mm Height of side wall of ascending belt, inside 800 mm Pit dimensions for conveyor belt 5,500 x 2,800 x 800 mm (l x w x d) Technical data for PET bottle flattener: Manufacturer BOREMA Type L 1600 Year of manufacture 2002 Suitable for returnable bottles with a capacity of 0.33 to approx. 2 litres Throughput approx. 50,000 PET bottles/hour Dimensions of feed opening 700 x 530 mm Drive motor power 11.5 kW Adjustment motor power 0.55 kW Pressure vessel 6–10 bar Working pressure 3.5 bar Connected load 27.7 kVA Main fuse 3 x 40 AT Scope of delivery: 1 piece used baler BOA 2040.S. 4V (6) 71.30 10 pieces wire reel stands, without wire 6 pieces wire deflection stations 1 piece bale slider 1 piece chain belt conveyor BOA 1500 HS 29° KTH 3000 *13625 * 1500 1 piece BOREMA PET bottles flattener type L 1600 1 piece of BOREMA PSS ibor 12 non-contact personal protection system 1 piece of machine documentation The machines were used in a PET recycling plant for compressing sorted PET bottles. As part of the production plant, the machines were regularly maintained and are in good condition, ready for immediate use. Comments: The documentation (operating instructions, CE declaration, electrical and hydraulic circuit diagrams) for the press is available. An inspection is possible by arrangement. We do not accept any liability for the technical specifications or any errors.

Condition: used, Year of construction: 2024, AMAZONE Cirrus 6003-2 Trailed seed drill combination Year of manufacture 2023, demo machine in use Approx. 170 hectares of mileage Equipment: Single-chamber hopper with 3600 liters Quick hopper emptying LED lighting Chassis swing Short telescopic drawbar with CAT 3 drawbar Dual-circuit air brake Tire packer with 12 Matrix tires 48 mounted discs, 460 mm finely serrated Stone remover Tramline segment Track width 1.80 m Electric half-width control Kfsdpfx Aajv Aqurenea 36 TwinTec plus coulters Control plus 65 depth control rollers Electronic coulter pressure remote adjustment Harrow set 6000/166 Comfort hydraulics ISOBUS operation Radar sensor AutoPoint Amatron4 Comfort package for Twin Terminal Bout marker Tramline marking Dispensing roller 660 cm Ridge clearer Scraper LED work lighting Blower drive with 6.2 cc hydraulic motor | Internal No.: 11165512

Condition: used, operating hours: 5,485 h, mileage: 82,555 km, power: 116 kW (157.72 HP), first registration: 05/2015, overall weight: 11,400 kg, fuel type: diesel, axle configuration: 4x2, maximum load weight: 5,500 kg, empty load weight: 5,900 kg, brakes: other, driver cabin: other, gearing type: other, emission class: euro5, loading space volume: 5 m³, number of seats: 2, Equipment: ABS, air conditioning, cabin, onboard computer, * German machine * Condition see photos * only 5.485 operating hours * 3 disc brushes * Maximum speed 62 km/h * thereby Aurtobahn approval * movable brush system * therefore up to 3.40 m working width Kfodpjvhqlnsfx Aanea * Pre-spraying device * Joystick operation * 5m³ stainless steel hopper * 850 mm emptying height * Camera monitoring for suction mouth and vehicle side * Rear view camera * Air-filled comfort seat * Air conditioning * Operating hours 10,326 * LED work lights * EasyDrive (hydrostatic drive) (SN) * Iveco 4-cylinder diesel engine * 118 KS/ 160 HP * 3,920 ccm * Rotating beacons * Stereo CD * Diameter intake manifold 225 mm * Diameter disc brush 750 - 900 mm * 600 l. Water tank * 120 liter diesel tank * max. gross vehicle weight 11,400 kg. * Unladen weight 5,900 kg. * Payload 5,500 kg. If new TÜV approval is required, we will be happy to make you an offer from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .