Used Tyre Changer for sale (9,527)

Condition: good (used), Tool changer chain, chain magazine, tool changing system, tool magazine -for: max. 60 recordings -Hole: Ø 17 mm Gedpfx Afob A Rzme Nott -Weight: 44 kg

Condition: good (used), Year of construction: 2018, operating hours: 3,869 h, load capacity: 1,400 kg, lifting height: 2,350 mm, fuel type: electric, mast type: duplex, construction height: 2,000 mm, Options: VERY unique WIDE TRACK version equipped with PALLET exchanger!! = Spreader / Rotator / Clamp (Range from 560 to 1700 mm) – Proportional lift & lower valves – Width between support legs 1280 MM!! Gtsdpfx Afox Rudrs Not

Condition: used, frequency 47-63 Hz total power requirement 18,5 kW dimensions of the machine ca. 0,52x0,28x0,25 m Artikel-Nr.: 6SE6440-2UE31-8DA1 Gtjdpfx Afod Ihdbs Njt MICROMASTER 440 without Filter 3 AC 500-600V +10/-10% 47-63Hz Konstantmoment 18,5 kW Overload 150% for 60 seconds, 200% for 3 seconds square moment 22 kW 520x275x245 (hxbxt)safety class IP20 environmental temperature -10+50°C e without OP/BOP

Condition: new, Year of construction: 2023, functionality: fully functional, Available immediately Godpfxsxy Ibms Af Nett

Condition: not inspected (used), functionality: unexamined, Used screen changer with 11-hole strand nozzle untested Gjdpew Nf Rxefx Af Nott As-is

Condition: used, This mobile stacking rack is an efficient and versatile solution for storing various materials. Gsdpjv U Au Ijfx Af Nett Measuring 2000 x 1410 x 2470 mm, the rack offers sufficient capacity for vertical loading. The construction is made of steel and finished with a green paint, ensuring protection against wear and corrosion. Thanks to its stackable and

Condition: good (used), Tool changer chain, chain magazine, tool changing system, tool magazine Gedpfsb A Nu Tjx Af Njtt -comes from a MAHO CNC machining center, type: MC 600 -for: max. 48 recordings -Recording: SK40 -Dimensions: 1630/H450 mm -Empty weight: 325 kg

Year of construction: 2025, condition: new, functionality: fully functional, pallet changer: semi-automatic, Samzon Pallet-Changer is a stationary machine for exchanging pallets without manual handling of the pallets. The pallet is fed into the machine using a pallet truck or pallet jack. The machine rotates back 120-degrees with the product and the bottom plate is lowered back down to the ground with the existing pallet to be exchanged with the new pallet. The bottom plate then lifts the new pallet back up under the product and the product is lowered back down, standing on top of the new pallet. The pallet Changer can be delivered with a variety of extra equipment and surface treatments. Gjdpfxew Udqho Af Nett Surface treatment is powder coated but can also be delivered in galvanized treatment.

Condition: excellent (used), Year of construction: 2022, operating hours: 8,500 h, functionality: fully functional, travel distance X-axis: 640 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 680 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, feed rate Y-axis: 6 m/min, nominal power (apparent): 40 kVA, controller manufacturer: Fanuc, controller model: OiMF, table load: 500 kg, rotational speed (min.): 40 rpm, rotational speed (max.): 15,000 rpm, overall weight: 11,000 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 22,000 W, number of spindles: 1, number of slots in tool magazine: 60, tool length: 400 mm, input voltage: 220 V, pallet changer: automatic, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Very well-maintained Wele HMC500 for sale. The machine was professionally inspected and dismantled by JKET/Wele factory service in week 48. The machine is securely packaged and ready for collection; commissioning by JKET/Wele can be arranged at extra cost. Control powered on: approx. 25,000 hours Machine powered on: approx. 25,000 hours Program run: approx. 8,500 hours Spindle powered on: approx. 8,500 hours Drive powered on: approx. 8,500 hours Axes in motion: approx. 8,500 hours Including: - Touch probe - 4x SK40 tool holders (1x touch probe, 3x tool holders) The machine was used exclusively for machining aluminium. Gsdpfx Afjxyuvqo Nott Scope of delivery includes: - 2 pallets with pallet changer (500 x 500 mm) - Table rotation: 0.001 degrees - 2 pallet towers, each with 4 sides and 3 Lang Quick-Point longitudinal clamps per side - Chip conveyor and chip bin included - Coolant tank (500 liters) and oil skimmer included Feeds: 20/60 m/min Spindle speed: 40–15,000 rpm Motor power: 18.5/22 kW Frequency converter included 500 l coolant tank Oil cooler Only aluminium machining performed on this machine All manuals available

Year of construction: 2025, condition: new, NEW MACHINES We have a large selection of new pallet inverters and pallet changers, both mobile and stationary models. We have machines for all types of products that need to be turned or replaced pallets. Semi-automatic or fully automatic. Gtsdpohmfctjfx Af Nst We deliver and install throughout the EU.

Year of construction: 2003, condition: excellent (used), functionality: fully functional, Leistritz 4/140 – Double piston screen changer for continuous operation. Especially suitable for heavily contaminated material. Gtjdjw Ea Irepfx Af Nst Materials that can be filtered: LDPE, HDPE, PP, PS, ABS Year of manufacture: 2003 Capacity: 800–1000 kg/h 4 screens – two per piston. Diameter of each screen: 140mm (two are always in use, total 280mm) Hydraulic unit: 1.5 kW Heater: 16 kW

Condition: excellent (used), I am offering furniture roll containers / storage trolleys with the following dimensions: Width x Depth x Height: 2800 x 1110mm ✅ Current stock: approx. 300 units Gsdpfexmt H Ujx Af Nett ✅ Additional sizes of furniture trolleys available on request. ✅ Each furniture roll container is completely refurbished (panel replacement, bolts). ✅ We provide a 1-year warranty on used furniture trolleys. • Carts without load can be folded and nested together. The furniture roll container is ideal for in-house transport and storage of almost all types of goods. All trolleys are in very good condition. Invoice provided, of course. Transport possible throughout Europe. KAM-KUB Logistic&Trolleys Europe – Your specialist for the sale and service of furniture roll containers in Europe.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: C24V5177, type of input current: three-phase, input voltage: 400 V, overall weight: 1,400 kg, Machine in perfect condition, very little used. It turns over the pallet with load and returns empty pallet allowing you to change it easily. For example for changing plastic to wooden pallets for replacing broken pallets with new ones. 2 pcs available, price / pc. Gtsdovahymspfx Af Njt You can find manufacturer's video attached but we can also make a recording for you. Pallet changer, pallet turner, pallet inverter.

Year of construction: 2013, operating hours: 100 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 234810, Pallet Changer Mobile sidepress Gedow Udiwspfx Af Nott

Condition: ready for operation (used), Year of construction: 2012, operating hours: 21,109 h, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 500 mm, controller manufacturer: Fanuc, spindle speed (max.): 20,000 rpm, number of slots in tool magazine: 80, TECHNICAL DETAILS Travel X-axis travel: 550 mm Y-axis travel: 1,000 mm Z-axis travel: 500 mm Axes A-axis: +300° / -120° C-axis: 360° C-axis resolution: 0.0001° Clamping Table Table dimension: Ø 500 mm Table dimension with zero-point system: 356 mm x 356 mm Max. table load: 350 kg T-slots: 18H8 x 4 Workpiece size: 650 x 500 mm Spindle Gtjdjw Stpuopfx Af Net Spindle speed range: 50 – 20,000 rpm Spindle power: 18.5 kW (S6) Spindle torque: 95 Nm (S6) Tool holder: HSK63 Control Control manufacturer: Fanuc Automatic Tool Changer Tool holder: HSK63 Number of tool positions: 80 Indunorm Pallet Changer Pallet size 1 for automation: 6 pcs 398 mm x 398 mm Preset pallet for Erowa IST: 1 pc 398 mm x 398 mm Pallet size 2 for automation: 15 pcs Erowa ITS115 mm Pallet size 3 for automation: 32 pcs Erowa ITS50 mm Transfer weight incl. pallet: 300 kg Rapid Traverse Rapid traverse X-axis: 48 m/min Rapid traverse Y-axis: 50 m/min Rapid traverse Z-axis: 50 m/min Rapid traverse A/C-axis: 18,000°/min (equivalent to 50 rpm) Feed Rate Feed X-axis: 32 m/min Feed Y-axis: 40 m/min Feed Z-axis: 40 m/min Feed A/C-axis: 12,000°/min (equals 33.3 rpm at max. 500 kg) Feed A/C-axis: 18,000°/min (equals 50 rpm) MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3,550 x 3,200 x 2,900 mm Machine weight: 16,000 kg Operating Hours (as of 30.04.2025) Power-on hours: 41,624 h Operating hours: 21,877 h Machining hours: 16,829 h Spindle hours: 21,109 h EQUIPMENT - Chip conveyor - Paper band filter - Bed flushing - Electronic handwheel - 6 Parotec pallets 398 mm x 398 mm - 1 Pre-pallet Parotec for Erowa ITS 398 mm x 398 mm - Extensive Fanuc control options - Machine documentation - Marposs infrared probe - Preparation for oil mist extraction - Blum laser tool measurement - Work area flushing - Hand rinsing gun - External coolant with 3 nozzles, 7 bar - Internal coolant 15 bar - Coolant temperature control - Internal & external air supply

Condition: new, Year of construction: 2025, Experience Palletisers & Toppy's fully automatic pallet changer systems, tailored to seamlessly integrate into your production lines, high-bay warehouses, and specific applications. Palletiser & Toppy work closely with system integrators to create customized pallet changer solutions that address your company’s unique requirements. Toppy "Four Press" is one of the safest solutions in our range. It is specially designed for fragile and unstable loads and features four walls (two front and two side) along with optional 'special mats' to secure products during pallet exchange and eliminate any risk of falling. Gtjdpfxoxd Eyhj Af Not The entire pallet change process is fully automated, ensuring efficiency and safety in your operations. Our in-house R&D team specializes in designing and adapting fully automatic pallet changer systems that fit your workflow, range of products, and specific needs. Whether you operate in logistics, manufacturing, or another industry, Toppy’s solutions provide the ultimate in safety, efficiency, and system integration. A fast and simple method to switch between wooden and plastic pallets, or vice versa.

Condition: used, Horizontal machining center with pallet changer STEINEL type BZ 24 FFZ with CNC control SIEMENS Sinumerik 850 M serial no. 77 year of construction 1990 Travel X: 630 mm, Y: 500 mm, Z: 500 mm Table size per pallet 400 x 400 mm Pallet rotation B-axis Spindle speed max. 7100 rpm infinitely variable Tool holder ISO 40 Mains connection 380 Volt, 50 Hz, 80 Amp. - Tool changer with 60 tool positions and double arm gripper - Pallet changer with 4 pallets - Horizontal pallet position for machining, axis movement = X-axis Gsdedzqmrepfx Af Nott - Pallet rotation = B-axis - Spindle ram as Z-axis - Spindle ram with transverse movement as Y-axis - KSS spray nozzles on the spindle ram and in the work area - Coolant device with chip conveyor under the work area - CNC control SIEMENS Sinumerik 850 M - Interface for data transfer Space requirement L x W x H 9000 x 3100 x 3200 mm Weight 13.5 tons Transport dimensions on truck: Machine with tool magazine L x W x H 9000 x 3000 x 3000 mm Chip conveyor L x W x H 4700 x 1000 x 1450 mm Container loading into a 40" OT HC is possible. good condition

Condition: not inspected (used), Please see technical details on photo. Gtedpehvzxzefx Af Njt

Condition: ready for operation (used), Year of construction: 2010, Hänel Stationary Pneumatic Pallet Changer / Pallet Turner Maximum pallet size: 1250mm x 850mm x 2030mm (L x W x H) Press closed: 76.5mm (width) Press opened: 85.5mm (width) Machine dimensions: 1550mm x 2120mm x 2150mm (D x W x H) Fully pneumatic operation. Year of manufacture: 2010 You are welcome to arrange a viewing. We can organize cost-effective shipping for you! You will receive a proper invoice. For customers from abroad, a net invoice can also be issued, provided you have a valid VAT ID number. Subject to prior sale. Gjdoxly Ivjpfx Af Nstt Visit our shop to see our other offers as well. The specified company names and trademarks are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical data and errors in the description of the item may occur and are subject to change.

Condition: used, Tool changer chain, chain magazine, tool changing system, tool magazine -Manufacturer: Seco, tool changing system tool arm -Drive unit: TP type MRC-S28-1V-210 -Dimensions: 780/420 / H300 mm -Weight: 66 kg Gedpfx Afjg U A I Ho Njtt

Condition: new, Year of construction: 2025, functionality: fully functional, LTS - Semi or fully automatic pallet changer system. Gtedpfxjxd Erqo Af Net A quick and simple way to switch from wooden to plastic pallets, or vice versa.

Condition: used, Horizontal machining center with 2-fold shuttle table STEINEL type BFZ 5 with CNC control SIEMENS Sinumerik 810 M serial no. 34 year of construction 1988 Godpfeutuyiox Af Nstt Travel X: 500 mm, Y: 400 mm, Z: 320 mm Clamping surface, table surface 500 x 400 mm Tool holder ISO 40 Spindle speed max. 6300 rpm infinitely variable Main spindle drive 12 kW Mains connection 380 Volt, 50 Hz, 30 kVA - Tool changer with 24 tool positions - Changing table with 2 stations - Interface for data transfer - Coolant unit with chip conveyor Space requirement L x W x H 4100 x 2500 x 2650 mm Weight approx. 8 tons good condition Transport dimensions: Machine L x W x H 3200 x 2500 x 2650 mm, approx. 7.5 tons. Chip conveyor L x W x H 3500 x 1100 x 2100 mm, approx. 600 kg

Condition: used, Tool changer for lathe, upper support, upper slide, dovetail guide -with four tool holders -Dimension: see photos -Dimensions: 400/260/H200 mm -Weight: 25.2 kg Gsdpfx Afsb Uhq Te Nstt

Condition: used, Machine not operational, control system does not start Horizontal Machining Center with Pallet Changer STEINEL Type BZ 24 FFZ with CNC Control SIEMENS Sinumerik 850 M Serial No. 58 Year of manufacture 1990 Travels X: 630 mm, Y: 500 mm, Z: 500 mm Table size per pallet 400 x 400 mm Pallet rotation B-axis Spindle speed max. 7100 rpm, infinitely variable Tool holder ISO 40 Power supply 380 Volt, 50 Hz, 80 Amp. - Tool changer with 60 tool positions and double-arm gripper - Pallet changer with 4 pallets - Horizontally positioned pallet station for machining, axis movement = X-axis - Pallet rotation = B-axis - Ram spindle as Z-axis - Ram spindle with cross movement as Y-axis - Coolant spray nozzles on the ram spindle and in the work area Gtodpfx Afsdzqmfs Njt - Coolant system with chip conveyor beneath the work area - CNC Control SIEMENS Sinumerik 850 M with TFT monitor - Interface for data transfer Space requirement (L x W x H) 9000 x 3100 x 3200 mm Weight 13.5 tons Machine not operational, control system does not start – otherwise in good condition Transport dimensions: Machine with tool magazine L x W x H 9000 x 3000 x 3000 mm Chip conveyor L x W x H 4700 x 1000 x 1450 mm

Condition: used, Tool changer for lathe, tool disk turret, top support, top slide, dovetail guide -for: max. 6 tools -Changer comes from a Gildemeister CNC lathe type: NEF 560 - Tip height: 105 mm -Turning chisel holders: 25 x 25 x 100 mm -Quantity: 2 pieces available -Price per piece -Dimensions: 315/315 / H380 mm Gtsdpfodkx Tbsx Af Net -Weight: 87 kg