Used Ultrasonic Cleaning Equipment for sale (43,735)

Condition: new, number 10 Stk. clamping range 15 - 50 mm Codpfsvkixlox Aizsri 28 mm weight 10 kg dimensions 0,3 x 0,3 x 0,2 m Basic set 4 / 53 pieces for table top thickness 15mm and 25mm 6 pcs screw clamps 14 pcs. quick clamping bolts 2 pcs. universal stop 100mm 6 pcs. universal stop 150mm 6 pcs. universal stop 225mm 2 pcs. universal stop 300mm 6 stop and clamping angles 175mm 4 stop and clamping angles 275mm 2 pcs. prisms 60mm 1 piece torch holder 1 pc. Eccentric stop 100mm diameter 1 piece perforated brush 30mm 2 pieces separating lotion 500ml, on a natural, biological basis 2 pcs. Welding table cleaner 500ml, on a natural, biological basis

Condition: used, Spirax Sarco Clean Steam Generator Station – 700 kg/h – Year of Manufacture 2019 For sale is a steam-heated clean steam generator station from the manufacturer Spirax Sarco with a clean steam capacity of approximately 700 kg/h. The system consists of a horizontal clean steam generator with an integrated tube bundle heat exchanger, a condensate cooler for feedwater preheating, and a fresh water feed via a control valve. Technical Data Manufacturer: Spirax Sarco GmbH System Type: Clean Steam Generator Station Serial Number: 2019/955 Year of Manufacture: 2019 (according to serial number, to be confirmed) Clean Steam Capacity: approx. 700 kg/h Clean Steam Pressure: 0.8 bar(g) Heating Steam Quantity: approx. 770 kg/h Heating Steam Pressure: approx. 3.5 bar(g) Total Power Output according to Design Data: 531 kW Feedwater Inlet: 15 °C Minimum Feedwater Pressure: 2 bar(g) Feedwater Quality: according to EN 285 Clean Steam Generator Design: horizontal, with pull-out U-tube bundle Design Pressure, Tube Side: 10 bar Design Pressure, Shell Side: 3 bar Design Temperature: 200 °C each Diameter: approx. 711 mm Length: approx. 2,600 mm Height: approx. 1,400 mm Thermal Output: 452 kW Tube Bundle: Stainless steel 1.4571 Insulation: approx. 100 mm mineral wool with galvanized steel sheet cladding Condensate Cooler / Feedwater Preheating Type: Plate heat exchanger Type: Alfa Nova 27-10H Manufacturer: Alfa Laval Capacity: 61 kW Design Pressure: 25 bar Design Temperature: 225 °C Condensate Quantity: approx. 770 kg/h Feedwater Quantity: approx. 700 kg/h Equipment Control cabinet and control system Electropneumatic pressure control valve Safety and shut-off valves Condensate trap and drain group Pressure sensors and manometers Level control with low water alarm Piping and connecting fittings Base frame with support saddles Codpfowgkyhjx Aizsri The system was designed and manufactured in accordance with the European Pressure Equipment Directive applicable at the time of manufacture. Further technical documentation is available upon request. Inspection possible by appointment.

Condition: used, mileage: 3,28,859 km, power: 330 kW (448.67 HP), first registration: 03/2019, fuel type: diesel, number of seats: 47, gearing type: automatic, emission class: euro6, color: other, brakes: retarder, Equipment: ABS, air conditioning, cruise control, = Additional options and equipment = - DVD - Air conditioning - Front refrigerator - Sleeper cab - Toilet - Webasto (auxiliary heater) Cedpfxsx Ebibo Aizjri = Further information = Height: 367 cm Damage: none = Company information = We are an international company based in Belgium, located near Brussels (approx. 20 km). Belgian Bus Sales is your ideal partner for the purchase and sale of used buses and features a large depot serving as a display area. We always have a wide range of buses in stock—of all brands, capacities, models, and price categories. We can find the right coach, school bus, or city bus tailored to your requirements and budget. All information is provided without guarantee. Subject to errors, prior sale, and typographical mistakes. Viewing of used buses is possible during our opening hours: Mon-Fri: 08:30 - 12:00, 12:30 - 17:00. Mówimy po Polsku (Agata). We speak your language: Nederlands, Français, English, Español, Português, Italiano, Русский, Polski and more.

Condition: new, functionality: fully functional, gearing type: hydrostat, color: green, overall weight: 1,200 kg, Year of construction: 2026, Equipment: additional headlights, adjustable boom, adjustable chassis, hydraulics, traction control, SUNLITE SL240- SL340- SL440- SL510- SL640 Mazaka Sunlite solar panel cleaning brush is a professional cleaning solution designed to ensure photovoltaic modules operate at maximum performance. Credpfxox Thn Nj Aizoi Equipped with high-quality, non-abrasive soft bristles, it safely removes dust, dirt, bird droppings, and other environmental residues without damaging the panel surfaces. With its ergonomic design and durable construction, it delivers high efficiency even during long-term use.

Condition: used, mileage: 5,96,702 km, power: 320 kW (435.08 HP), first registration: 07/2015, fuel type: diesel, number of seats: 57, gearing type: automatic, emission class: euro6, color: other, brakes: retarder, Equipment: ABS, air conditioning, cruise control, disability-friendly, navigation system, onboard kitchen, trailer coupling, = Additional options and equipment = - DVD - Air conditioning - Front refrigerator - Wheelchair lift - Sleeper cabin - Toilet Cjdpfxjyvqrpo Aizjri - Webasto heating = Further information = Height: 380 cm Damage: none = Company information = We are an international company based in Belgium, near Brussels (+/- 20 km). Belgian Bus Sales is your ideal partner for the purchase and sale of used buses, with a large lot serving as our showroom. We always have numerous vehicles in stock across all brands, capacities, models, and price ranges. We can find the right coach, school bus, or city bus tailored to your needs and budget. All information is provided without guarantee. Subject to errors, prior sale, and typographical mistakes. Viewing hours for used buses: Mon-Fri: 08:30 - 12:00, 12:30 - 17:00. Mowimy po Polsku (Agata) We speak your language: Nederlands, Français, English, Español, Português, Italiano, Русский, Polski and more.

Condition: used, mileage: 1,64,118 km, power: 84 kW (114.21 HP), first registration: 01/2019, fuel type: diesel, axle configuration: 4x2, wheelbase: 3,660 mm, fuel: diesel, CO₂ emissions: 213 g/km, color: white, gearing type: mechanical, number of gears: 6, emission class: euro6, Equipment: ABS, air conditioning, central locking, electric window regulation, onboard computer, power mirror, sliding door, start-stop system, tire pressure monitoring, = Additional Options and Equipment = - Attention Assist - Automatic Dipped Headlights - Heated Exterior Mirrors - Front Electric Windows - Electrically Folding Exterior Mirrors - Driver Airbag - Remote Central Locking - Height-Adjustable Driver's Seat - Height-Adjustable Front Seats - Keyless Start - Comfort Seats - Front Centre Armrest - Multifunction Steering Wheel - Rain Sensor - Reversing Camera - Right-Side Sliding Door - Immobiliser - Thermal Glass - Blind Spot Monitoring - Adjustable Steering Wheel - Partition Wall = Further Information = General Information Number of doors: 5 Technical Data Number of cylinders: 4 Engine displacement: 2,143 cc Weights Unladen weight: 2,100 kg Crsdpfx Asyuquasizei Payload: 1,400 kg Gross vehicle weight: 3,500 kg Interior Interior colour: Black Fuel Consumption Average fuel consumption: 8.1 l/100km Urban fuel consumption: 9.4 l/100km Extra-urban fuel consumption: 7.4 l/100km Maintenance, History, and Condition MOT (General Inspection): Valid until 01/2027 Number of keys: 1 (1 remote control)

Year of construction: 2007, condition: used, functionality: fully functional, The ELDAN FG952 is an industrial, high-speed, single-shaft granulator designed to further reduce the size of materials after primary shredding, down to a specified granule size. The material is fed into the cutting chamber, where a rotating rotor with moving blades interacts with stationary blades. The granulated material passes through a replaceable screen, allowing for the selection of the desired final fraction size. The unit features an adjustable blade gap, multiple blade sharpening options, easy blade replacement, and a hydraulic opening for the feed hopper, which facilitates access to the cutting chamber during maintenance. Replaceable wear parts and screens with different hole sizes are used. Electric motor power: 75 kW / approximately 100 HP Rotor length: 950 mm Rotor speed: 475 rpm Moving ("flying") blades: 12 pcs. Stationary blades: 4 pcs. Capacity up to 3,500 kg/h Approximate weight 4,400 kg Length: 1,940 mm Codjz Dgrvopfx Aizori Width: 1,960 mm Height: 2,800 mm Motor rated speed: 1,480 rpm Standard electrical grid: 3 phases, 400 V, 50 Hz The FG952 can be used to granulate various materials, including: tires and rubber; electrical and other cables; aluminum scrap; plastics; various secondary raw materials after primary shredding.

Year of construction: 2001, condition: used, Water consumption per cycle: 35/40l, electrical connection: 36A, connected load: 22.5kW, length: 640mm, width: 640mm, height: 640/1000mm, an on-site inspection is possible. Cedpfx Aez S Ivtsizeri

Year of construction: 1999, condition: used, Loading height: 850mm, basket dimensions: 670x480x300mm, max. batch weight: 150kg, exhaust air volume: 200m³/h, throughput: approx. 8-10 batches/h, rinsing temperature: 70-80°C, max. drying temperature: 130°C, number of immersion tanks: 2, power supply: 3x400V/50Hz, connected load: 58kW, system height: 2300mm, height of side structure: approx. 2200mm, left system section: approx. 1000mm, main system section: approx. 2800mm, right overhang: approx. 400mm, length: 3200-4200mm, width: 1800mm, height: 2300mm, operating hours: 43,294h, components: working chamber, immersion tank I, immersion tank II, oil separator, drying unit, filter. An on-site inspection is possible. Crjdpfxj Adt Ike Aizei

Condition: used, Five Demag cranes are offered. Load capacity: 125kg-2000kg. Including trolley and controls. Inspection possible by arrangement. Cjdjz Irmaepfx Aizeri

Condition: refurbished (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 523570, total width: 2,000 mm, total length: 3,500 mm, total height: 800 mm, protection type (IP code): IP42, overall weight: 4,830 kg, input voltage: 151 V, STEINERT Overband Magnet DMS 4 Z 130 180/151 S – 4,830 kg – Year of Manufacture 1995 For sale is a used STEINERT overband magnet for the magnetic separation of ferrous metals from bulk materials and material flows. The overband magnet from the renowned manufacturer STEINERT is particularly suitable for use in recycling and processing plants, construction waste processing, and in the scrap and waste management industries. It offers an interesting option for supplementing existing conveying and sorting systems. - Duty cycle: 100% Cjdpfo Afubnox Aizsri - Weight: approx. 4,830 kg The overband magnet is offered as a used item. Information on complete functionality cannot be conclusively confirmed at this time. An inspection is possible after prior arrangement. If you are interested or have any questions, please do not hesitate to contact us.

Condition: used, mileage: 5,55,466 km, power: 353 kW (479.95 HP), first registration: 03/2012, fuel type: diesel, number of seats: 93, gearing type: automatic, color: other, brakes: retarder, Equipment: ABS, air conditioning, cruise control, = Additional options and equipment = - DVD player - Air conditioning - Front refrigerator - Sleeper cabin - Toilet - Webasto auxiliary heater = Further information = Height: 400 cm Csdpez Hbl Njfx Aizsri Damage: none = Company information = We are an international company based in Belgium, located in the Brussels area (+/-20 km). Belgian Bus Sales is your ideal partner for the purchase and sale of used buses, offering a spacious parking lot used as a showroom. We always have a wide selection of buses from all brands, capacities, models, and at every price level in stock. We can find the right coach, school, or city bus tailored to your needs and budget. All information provided without guarantee. Subject to error, prior sale and typographical mistakes. Viewing hours for used buses: Mon.-Fri.: 08:30 - 12:00, 12:30 - 17:00. Mowimy po Polsku (Agata). We speak your language: Nederlands, Français, English, Español, Português, Italiano, Русский, Polski and more.

Condition: used, mileage: 6,83,107 km, power: 294 kW (399.73 HP), first registration: 11/2015, fuel type: diesel, number of seats: 55, gearing type: automatic, emission class: euro6, color: other, brakes: retarder, Equipment: ABS, air conditioning, cruise control, disability-friendly, = Additional Options and Equipment = - DVD - Front refrigerator - Wheelchair lift - Sleeper cabin - Toilet - Webasto heater Crsdpfx Aijx Hhlnozoi = Additional Information = Height: 370 cm Damage: none = Company Information = We are an international company based in Belgium, near Brussels (+/-20 km). Belgian Bus Sales is your ideal partner for the purchase and sale of used buses and offers a large yard serving as a showroom. We always have a wide selection of buses in stock from all brands, with varying capacities, models, and in every price range. We can find the right coach, school, or city bus tailored to your needs and budget. All information provided without guarantee. Errors, prior sale, and typing mistakes excepted. Opening hours for viewing used buses: Mon-Fri: 08:30 - 12:00, 12:30 - 17:00 Mowimy po Polsku (Agata). We speak your language: Nederlands, Français, English, Español, Português, Italiano, Русский, Polski, and more.

Condition: new, Year of construction: 2026, functionality: fully functional, The CITY BEETLE is a professional electric street cleaning trolley designed for the efficient and effortless collection and sorting of litter gathered from pedestrian streets, pavements, alleys, parks and the surrounding areas of various sites. It ensures many hours of uninterrupted work without physical strain, even during long shifts. Features • The trolley holds up to 20 litres of liquid and is equipped with special mounts for securing cleaning equipment. • It easily passes through turnstiles at bus and train stations. • The battery can be charged anywhere using a standard 230 V socket. • Special mounts allow tools to be easily attached to the trolley. Key benefits of the CITY BEETLE street cleaning trolley: Mobility: speed of up to 6 km/h for quick cleaning of large areas Environmental friendliness: safe for people and the environment Versatility: collects and sorts waste, washes away dirt with water Cost-effectiveness: low energy consumption and minimal maintenance Safe operation: electromagnetic brakes, optimal tyre pressure, IP54 protection Technical specifications: • Dimensions: 2300 × 1500 × 1200 mm • Weight: 410 kg (empty) • Main waste container: 1 × 240 l • Additional waste containers: 2 × 120 l • Water tanks: 2 × 10 l • Spray angle adjustment: Available • Motor power: 1.2 kW • Battery runtime: Up to 8 hours without recharging • Charging time: 10–12 hours • Wet cleaning function • Noise level: 65 dB • Wheel size: Ø320/Ø400 mm, with electromagnetic brakes for safe operation • Tilt angle: up to 10° • Protection class: IP54 (dust- and water-resistant) • Pump capacity: 3.6 l/min • Maximum pressure: 0.6 MPa ‘CITY ANT AQUA’ STREET VACUUM CLEANER Equipment for cleaning urban areas, streets, pavements, parks, stadiums, railway stations, airports, car parks and industrial zones of various types of waste. The City Ant street vacuum cleaner runs on rechargeable batteries, providing 9 hours of autonomous operation. It can be charged overnight from a 220 V mains supply. Easy to use, the vacuum cleaner can be operated with one hand and is quiet. Replacing the dust bag takes just 2–3 minutes. It does not pollute the air. It can collect all types of waste: wood, steel, plastic, paper, pieces of cardboard, textile waste, leaves, cigarette butts, cans and bottles (glass, plastic and metal), etc. The City Ant is suitable for various surfaces: concrete, asphalt, paving stones, grass, sand, etc. Crodpfjt If A Dex Aizei Technical specifications: - Electric motor - 48 V / 1200 W - 48 V / 1200 W electric drive - provides forward and reverse movement - Waste collection type - hopper; - Vacuum cleaner power 1.2 kW; - Maximum speed 6 km/h; - Hopper capacity 240 l; - Vacuum hose Ø 125 mm; - Vacuum hose length 2.5 m; Lrs Drt Hajvriluezoi - Operating time 8 hours; - Charging time 10–12 hours; - Wheels Ø 320 mm; - Dual spray nozzles; - Dust filter area 16 m²; - Climbing ability up to 25% - Capable of clearing kerbs up to 15 cm high. - Spray nozzles: 2 – one external and one internal. - Indicator light

Condition: new, ASCO C500 Parts. We have various parts for these machines, both new and used. Worldwide Shipping. Cold Jet dry ice machine for sale, dry ice blasting machine for sale, dry ice blaster for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, second-hand dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning without disassembly, dry ice paint removal, dry ice coating removal, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high-pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice. Cedpjzv Idmsfx Aizeri

Condition: new, functionality: fully functional, power: 147 kW (199.86 HP), fuel type: electric, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE FABO MCC-100 is small efficient model of CC series, those are a mobile type & closed circuit crushing and screening plants that is used for processing of hard materials such as basalt, granite, gabbro, dolomite and other types of hard stones. TECHNICAL SPECIFICATIONS: -Bunker: 7m3 -Production Capacity: 80-100 Tons Per Hour -Crusher Type: Cone Crusher Codpezv Tbwofx Aizori -Maximum Feeding Size: 130mm -Vibrating Screen Size and Deck: 1300x4000mm 3-4 decks -Total Motor Power: 147 kW MCC-100 is a combination of: • Bunker(Hopper) • Vibrating Feeder • Cone Crusher • High Stroke Type Vibrating Screen • Folding type feeding, feedback, bypass and stock conveyor belts • Hydraulic feet • Mobile Chassis with axles and tires • Fully Automation System • Dust Suppression System • Easy walking platforms for maintenance Diesel Generator (Optional) FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: new, Year of construction: 2026, CORMAK DI329 – Compact Dry Ice Cleaning Machine The CORMAK DI329 is a compact and modern dry ice cleaning machine designed for effective removal of dirt from machinery, molds, tools, production components, and technical surfaces. It is an ideal solution for companies looking for an efficient, clean, and safe cleaning method without the use of chemicals, water, or abrasive materials. The main advantage of the DI329 is its compact design and high mobility, which clearly distinguish it from many larger and less convenient machines available on the market. This makes the machine suitable not only for production facilities, but also for servicing, maintenance, field work, and any application where convenient transportation and quick setup are important. The machine uses dry ice pellets with a diameter of 3.0–5.0 mm and allows precise adjustment of operating parameters to suit the type of surface being cleaned and the level of contamination. Adjustable operating pressure and dry ice feed rate enable effective cleaning of both delicate components and more demanding industrial surfaces. Key Advantages Compact design for easy transportation and use in different locations, high mobility and convenient operation, effective cleaning without chemicals or water, non-abrasive cleaning that does not damage the treated surface, adjustable operating pressure, adjustable dry ice feed rate, quick setup and preparation for operation, ideal for industrial, service, and technical applications. Applications The CORMAK DI329 is suitable for applications including: cleaning machinery and production equipment, Crsdpfx Aezwfu Seizoi removing dirt from molds, tools, and components, cleaning metal and technical components, service and maintenance work, cleaning surfaces without the need to dismantle multiple components, removing deposits, grease, process contamination, and production residues. Included Equipment You receive a brand-new CORMAK DI329 dry ice cleaning machine, ready for operation with dry ice pellets, equipped with: CORMAK DI329 machine, a set of nozzles in various shapes and sizes, accessories required for operation according to the selected configuration. Different nozzle shapes and sizes allow the working stream to be adapted to the type of component being cleaned and the specific working environment, increasing the machine's versatility in everyday use. Technical Specifications Technical specification Value Power < 1100 W Power supply 230 V AC, 50 Hz Air consumption 1.0–3.0 m³/min Pneumatic supply pressure 0.4–1.0 MPa (4–10 bar, adjustable) Dry ice feed rate 0–3.2 kg/min (adjustable) Dry ice hopper capacity 7.5 kg Weight 65 kg Dry ice pellet size 3.0–5.0 mm Drive system Direct drive Machine dimensions (L × W × H) 670 × 460 × 900 mm

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, Manufacturer: Kallfass GmbH Type: Compact shrinking machine KC 5040/450 Universal Year of manufacture: 2006 Technical data: Welding frame dimensions: 500 x 400 mm Film roll width: max. 550 mm Working height: 870 - 970 mm Power connection: 380 V three-phase Easy-to-operate angle welding machine, combined with a shrinking tunnel. Particularly robust design for industrial use. Welding frame dimensions 500 x 400 mm. Proven impulse sealing technology with Teflon-coated separating wire for an absolutely odorless operation. Equipped with a sealing mechanism as a clamping system to ensure accurate adherence to the set sealing time and for problem-free separation welding, even with thick films. Codszlrqpspfx Aizori Inspection and demonstrations are possible by arrangement in our premises. Functional guarantee, no warranty.

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2020, operating hours: 200 h, machine/vehicle number: 31015, control type: PLC-controlled, degree of automation: manual, actuation type: manual, controller manufacturer: 4JET, overall weight: 350 kg, total length: 1,310 mm, total width: 525 mm, total height: 1,454 mm, power: 200 kW (271.92 HP), laser hours: 200 h, compressed air connection: 5 bar, laser power: 200 W, laser wavelength: 1,064 nm, type of cooling: water, laser type: fiber laser, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, emergency stop, We offer a non-contact, mobile laser cleaning system, model 4JET M200, which was used solely for demonstration and testing purposes. We also offer a wide range of accessories, including: fiber extension cables (3m to 10m), 5 pieces; laser safety goggles; and a mobile laser protection curtain with frame. Codpfx Ajzlrzzjizeri

Condition: used, Year of construction: 1998, working width 1000 mm battery 24 V Cedpfxjzlukfo Aizsri weight of the machine ca. 0,75 t dimensions of the machine ca. 1,7 x 1,0 x 1,4 m Ride-on sweeper - incl. charger

Condition: good (used), machine/vehicle number: 3495, total length: 7,900 mm, total width: 2,810 mm, Year of construction: 2010, operation weight: 8,200 kg, load capacity: 1,20,000 kg, Novatech NOVATECH RT20-120T from Uniktruck Crsdpfezvzh Esx Aizji

Condition: like new (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 837180, total width: 1,710 mm, total length: 2,860 mm, total height: 2,040 mm, outer diameter of label roll: 300 mm, inside diameter of label roll: 76 mm, input voltage: 400 V, All-round labeling machine 352C Machine running direction from left to right, viewed from the operator side - Machine frame made of aluminum profiles and table top made of stainless steel - Machine is mobile - Equipped with 2x HERMA Eco labeling heads - Labeling speed 30 m/min - Product separation using side belts - Printer integration possible after technical evaluation - All-round labeling in the running direction to the right is possible Crsdpfx Aez I Tp Aoizoi - Product diameter after technical evaluation from 30-100 mm (for all-round labeling) - Design of the all-round labeling station with feed belt and counter-pressure plate - Conveyor belt length approx. 2,160 mm, width 105 mm Further information on request Additional demonstration machines are regularly available in our standard range. We would also be pleased to invite you to our showroom to get to know the machines during a visit or live demonstration. Please bring your own products with you so that we can demonstrate the application in a practical way under your individual conditions.

Year of construction: 2005, condition: used, Chamber spray cleaning system Basket usable dimensions, loading basket: L x W x H 842 x 659 x 512 mm Maximum loading weight: 100 kg; loading unit in front of the system included 2-tank design: Cleaning (1,200 liters) Rinsing (1,200 liters) System with electric heating - Cleaning process: Spraying - Basket remains stationary, swings, or rotates during the cleaning, rinsing, and drying process (freely selectable in the program) - Vacuum drying - Full filtration of the cleaning solution (Tank 1), 2x bag filters, filter fineness freely selectable - Automatic water refill for each tank - Coalescence oil separator External dimensions: 4,300 x 4,360 x 4,020 mm System weight: 5 tons Connection power: 110 kVA Fuse: 250A Control: Siemens S7 The system is fully functional, but with the limitation that operation via the panel is only partially functional. Crsdpfoz E I Syox Aizei This is a consignment sale; the system must be dismantled and collected on-site by the buyer.

Condition: excellent (used), functionality: fully functional, axle configuration: 3 axles, suspension: steel, DE ANGELIS 3R3201, manufactured in December 1999, with spring-loaded ramps, and a useful load capacity of 26,400 kg. Codpfx Aiez N Hb Nszsri

Year of construction: 2013, operating hours: 2,000 h, condition: used, functionality: fully functional, The Branson 2000XDT Ultrasonic Welder is a unit providing up to 2500W of power. It is designed for precision and efficiency in various plastic processing industries. With the reputable Branson brand backing it, this ultrasonic welder is perfect for sealing and welding plastic products with ease. Credpjz Rm Tzefx Aizji This equipment offers reliable and high-quality results for a wide range of plastic materials. Trust in the Branson 2000XDT Ultrasonic Welder for all your plastic welding needs. We have added sound sound proof housing (white box on photos with internal sound absorbing foam), so workers are not exposed to high frequencies and high sound levels. They can work without hearing protection. Access to work area is possible through transparent Plexiglass door. Dimensions of sonotrode are 200 x 125 x 115 mm L x W x H and allow for large product welding. Sonotrode is flat on the bottom. Number of nests are also part of the offer. Included sound proof housing for quiet operation. No need for additional hearing protection.