Used Ultrasonic for sale (259)

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 150 h, functionality: fully functional, total width: 2,920 mm, total length: 5,720 mm, total height: 3,360 mm, maximum load weight: 50 kg, heating capacity: 59 kW (80.22 HP), warranty duration: 6 months, input frequency: 50 Hz, year of last overhaul: 2026, 4-chamber ultrasonic cleaning system with automatic goods transport Maximum loading weight: 50 kg including basket Usable basket dimensions (internal): 426 x 375 x 470h mm Loading station with transport trolley 1. Ultrasonic cleaning with bottom and side sonication (25/45 kHz - switchable) 2. Ultrasonic rinsing with bottom sonication (25/45 kHz - switchable) 3. Ultrasonic rinsing with bottom sonication (25/45 kHz - switchable), including lift-out function 4. Hot air dryer Unloading station - Tank 1 (ultrasonic cleaning) is also equipped with an overflow and a large separate oil separator. - Automatic cover on Tank 1 - Media filtration in all tanks (via cartridge filter) - Complete system enclosed and with exhaust extraction - Control system: Siemens S7-1500 incl. 12" HMI touch panel - Documentation available in German Electrical connected load: 59 kW The system can also be dismantled and re-installed at a new location by our specialist technicians for an additional charge, if required. Lsdpfx Aey H Uzvsckoab Water treatment for Tank 4 (final rinse) can be supplied at extra cost. Test cleaning possible at any time, the system is powered up.

Condition: good (used), Ultrasonic sensor, ultrasonic generator, ultrasonic transducer, ultrasonic plastic welding machine, lowering unit for ultrasonic welding machines, lowering unit - flatbed, lowering column -Manufacturer: Nucleus, Absen column 35 for ultrasonic welding machines Ledpjy A Iftefx Ackeab -Eco FR361101 -Servo motor: Dunkermotoren GR 42x40, voltage 24 V -Receiver: Shaft Ø 20 x 18 mm see photo -Dimensions: 270/230/H85 mm -Weight: 2.5 kg

Year of construction: 2023, condition: used, We offer this used Weber Ultrasonics Saphir Digital Manual Station ultrasonic welding machine, year of manufacture 2023. Approximately 92,500 units have been produced with this machine. Sonotrode TR35Ti Frequency: 35 kHz Power: 1000 W Laodoyimqwspfx Ackjb 230V AC Stroke measurement system: 26.88 mm Minimum force: 34 N Maximum force: 500 N Low Level: 0 N Low Offset: 0 N If you have any questions or require further information, please feel free to send us a message or call us.

Year of construction: 2025, condition: new, Ultrasonic bath UEC 300 is industrial solution for cleaning large and heavy parts that are very dirty. The machines contain a pneumatic elevator capacity of 200 kg. Working frequency is 28kHz with sweep technology. The machine consists of a main ultrasonic bath with three side ultrasonic piezo transducers and second, overhead bath with oil separator. Control is with high quality touch screen HMI with 3D display notifications. Complete bath is made from acid resistance stainless Lsdpfx Aogd Uifjcksab steel AISI304 thickness 2mm. ----- Characteristics : Platform size : 900x570mm Maximum load : 200 kg. Useful height : 400mm Ultrasonic power : 3kW(6kWp-p) Ultrasonic frequency 28 kHz with sweep mode Heater power : 9kW FEATURES : Touch screen 7 " with 3D notification Automatic water filling system. Automatic elevator mode work Level sensor Elevator position sensors Cover sensor Warranty : 2 years. WE HAVE AND OTHER MODELS ON STACK

Year of construction: 2020, condition: good (used), Machine is in excellent condition. Parts shown by hand not come. Lsdpfxoukfico Ackoab

Condition: good (used), Ultrasonic sensor, ultrasonic generator, ultrasonic transducer, ultrasonic plastic welding machine, ultrasonic converter, ultrasonic sonotrode -Manufacturer: Herrmann, Ultrasonic welding transducer, ultrasonic vibration unit -Welding transformer: Type KHS20-IP50-L -Horn/Ultrasonic Sonotrode: Type 4 004 .433 see photos -Quantity: 1x ultrasound transducer available -Dimensions: 450/270/H145 mm Laodpfsyxm R Tex Ackob -Weight: 20.1 kg

Condition: good (used), Ultrasonic sensor, ultrasonic generator, ultrasonic transducer, ultrasonic plastic welding machine, ultrasonic converter, ultrasonic sonotrode -Ultrasonic sweat transducer: Ultrasonic vibration unit -Welding transducer/horn: Type R2003474 -Ultrasound sonotrode: Lsdjyxm Rtjpfx Ackoab -Quantity: 1x ultrasound transducer available -Dimensions: 515/160/H115 mm -Weight: 18.9 kg

Condition: good (used), Ultrasonic sensor, ultrasonic generator, ultrasonic transducer, ultrasonic plastic welding machine, ultrasonic converter, ultrasonic sonotrode -Manufacturer: Dukane, Ultrasonic welding transducer, Ultrasonic vibration unit -Welding converter: Type 41B30 92420 353324 -Horn: Type 2.0 -Ultrasonic sonotrode: Ledpfoyxm Raex Ackjab -Quantity: 1x ultrasound transducer available -Dimensions: 450/110/H120 mm -Weight: 6.1 kg

Condition: good (used), Ultrasonic sensor, ultrasonic generator, ultrasonic transducer, ultrasonic plastic welding machine, ultrasonic converter, ultrasonic sonotrode -Manufacturer: Dukane, Ultrasonic welding transducer, Ultrasonic vibration unit -Welding converter: Type 41B30 92420 353324 -Horn: Type CTC205708 -Ultrasonic sonotrode: -Quantity: 1x ultrasound transducer available -Dimensions: 450/110/H83 mm Laodpoyxm Ixjfx Ackjb -Weight: 4.6 kg

Condition: good (used), Ultrasonic sensor, ultrasonic generator, ultrasonic transducer, ultrasonic plastic welding machine, ultrasonic converter, ultrasonic sonotrode -Manufacturer: Herrmann, Ultrasonic welding transducer, ultrasonic vibration unit -Welding transformer: Type KHS20-IP50-L -Horn/Ultrasonic Sonotrode: Type 400 see photos -Number: 3x ultrasound transducer units available Lodpfoyxm Hnex Ackeab -Price: per piece -Dimensions: 450/100/H145 mm -Weight: 15.7 kg

Condition: good (used), Ultrasonic sensor, ultrasonic generator, ultrasonic transducer, ultrasonic plastic welding machine, ultrasonic converter, ultrasonic sonotrode -Manufacturer: Herrmann, Ultrasonic welding transducer, ultrasonic vibration unit -Welding transformer: Type KHS20-IP50-L -Horn/Ultrasonic Sonotrode: Type 400 see photos -Number: 3x ultrasound transducer units available Lasdpfx Asxyw H Eecksb -Price: per piece -Dimensions: 450/100/H70 mm -Weight: 4.8 kg/pc.

Condition: new, Year of construction: 2026, Ultrasonic Cleaning System - Ultrasonic Cleaning Device Purchased from insolvency assets - New, unused device! Manufacturer: Derui Ultrasonic Unit made entirely from stainless steel - Bottom-mounted ultrasonic, multi-frequency: switchable between 25/45 kHz, power (effective/peak): 1,600/3,200 W Ledpfx Ajyz N Exocksab - Heating adjustable up to 80°C; power: 2,500 W - Basket dimensions (LxWxH): 530 x 400 x 300 mm - Tank dimensions (LxWxH): 550 x 420 x 320 mm - External dimensions (LxWxH): 650 x 560 x 830 mm - Weight of device (empty): 115 kg - Unit is mobile on castors - Including insulated cover - Including 1 stainless steel goods basket No warranty, as purchased from insolvency assets

Condition: new, Year of construction: 2026, Ultrasonic Cleaning System - Ultrasonic Cleaning Device Purchased from insolvency assets - unused new device! Manufacturer: Derui Ultrasonic Device made entirely of stainless steel - Bottom-mounted ultrasonic, multi-frequency: switchable between 25/45 kHz, Power (effective/peak): 1,000/2,000 watts - Adjustable heater up to 80°C; Power: 1,500 watts - Basket dimensions (LxWxH): 400 x 350 x 280h mm - Tank dimensions (LxWxH): 420 x 370 x 300h mm - External dimensions (LxWxH): 520 x 510 x 810h mm - Weight of unit (empty): 85 kg - Unit is mobile on castors Lsdpfx Acoyz Nu Tokjab - Includes insulated cover - Includes 1 stainless steel goods basket No warranty, as purchased from insolvency assets.

Year of construction: 2003, condition: good (used), functionality: fully functional, HEGA Apparatebau Ultrasonic Cleaning Machine: - Very high cleaning performance thanks to 7 tanks - The control system and the drives for goods movement were renewed a few years ago. Laodpfxoyl Rp Ee Ackeb - Tank size (L x W x D total): 80 x 40 x 100 (107) cm - With return conveyor belt - Base washing baskets made of stainless steel - Length approx. 7 m, width approx. 1.6 m without return conveyor - Siemens HMI and Siemens control - Documentation: circuit diagram available The system must be dismantled and transported by the buyer.

Condition: refurbished (used), Year of construction: 2002, operating hours: 38,650 h, functionality: fully functional, Solvent system Completely overhauled. 3 tanks. Ultrasonic immersion/spraying/vapor degreasing/vacuum drying. Integrated distiller with automatic oil discharge. Automatic loading 5+5. Shopping cart dimensions 4x T520xW320xH200. Fill volume 1000L Laodpfx Aewndu Uockob

Condition: like new (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: DZ-202409012, heating capacity: 3 kW (4.08 HP), power: 1.5 kW (2.04 HP), operating temperature: 95 °C, usable tank capacity: 99 l, Equipment: documentation/manual, The machine was purchased new from the manufacturer in 2024, has only been used briefly, and is therefore in like-new condition! The system consists of four independent chambers and enables a complete cleaning process, including washing, rinsing, and drying. TECHNICAL DETAILS Number of units: 4 Housing material: Stainless steel AISI 304 Wall thickness: 2 mm Units: Ultrasonic washing chamber and ultrasonic rinsing chamber Ultrasonic power: 1,500 W (30 transducers) Frequency: 40 kHz Heating power: 3 kW Maximum operating temperature: 95 °C Circulation and filtration system Dynamic lifter system (“up & down” technique) for enhanced cleaning performance Final rinse chamber Laodpjyx Annefx Ackob Tank capacity: approx. 99 l Heating power: 3 kW Hot air drying chamber Heating power: 3 kW High-performance blower Temperature control MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,880 x 1,350 x 1,180 mm Machine weight: approx. 480 kg EQUIPMENT Separate fluid supply and discharge for each chamber Suitable for use with industrial cleaning chemicals Stainless steel wire baskets Drain valves and level sensors Electronic control system Complete technical documentation and certificates The washing system is designed for precision cleaning of machined metal parts, particularly for the removal of machining oils, chips, and fine particles following turning, milling, or grinding operations.

Condition: new, Year of construction: 2026, total width: 680 mm, total length: 780 mm, total height: 670 mm, maximum load weight: 15 kg, tank capacity: 105 l, warranty duration: 12 months, inner dimension height: 400 mm, inner dimension length: 600 mm, inner dimension width: 500 mm, Tank dimension: (lxwxh) 900 x 600 x 500mm Total dimension: (lxwxh) 1.080 x 780 x 750mm Wash tray outside dimension: (lxw) 840 x 540mm Loading cap. 60kg Filling volume cap. 240 Liters Ultrasonic Power: 12KW two ultrasonic activators, sidewards mounted heating power: 6KW, 30-70°C Electrical power 400V/50Hz Drainage valve, overflow valve, electrical heating, Ledpfx Acox E S H Tjkoab Generator with booster function, Frequency 40kHz, niveau control, incl. manual cover, incl. tray without optional lifter function

Condition: new, Year of construction: 2026, Tank dimension: (lxwxh) 900 x 600 x 500mm Total dimension: (lxwxh) 1.080 x 780 x 750mm Wash tray outside dimension: (lxw) 840 x 540mm Loading cap. 60kg Filling volume cap. 240 Liters Ultrasonic Power: 12KW two ultrasonic activators, sidewards mounted heating power: 6KW, 30-70°C Electrical power 400V/50Hz Drainage valve, overflow valve, electrical heating, Generator with booster function, Frequency 40kHz, niveau control, Laodpjc Riycefx Ackeb incl. manual cover, incl. tray without optional lifter function

Condition: used, functionality: fully functional, Ultrasonic washing system, make Branson Type: EVD Power: 400 V / 30 A Functionality: The vacuum chamber is loaded with workpiece carriers measuring 50 × 30 × 20 cm. Laedpfx Ajw Evnzocksb The chamber is then flooded with detergent and ultrasonic cleaning takes place. After the cleaning phase, the chamber is evacuated. The next step involves steam treatment, followed by another vacuum process. The result is grease-free and dry products.

Year of construction: 2023, condition: new, Ultrasonic cleaning tank with special dimensions. We can produce giant ultrasonic tanks according to your needs. Laodpfx Acjd Tnt Dskeb This tank has 4.000 kgs liquid capacity and produced from stainless steel. Ideal for maintenance purpose cleaning applications. ultrasonic tank, ship maintenance, cooler washing, heat exchanger washing, engine parts washing ultrasonic, ultrasonic cleaning for big parts,

Year of construction: 2023, operating hours: 1 h, condition: new, Ultrasonic cleaning machine with automatic basket transfer mechanism. Operation Principle : Automatic transfer mechanism, transfer the basket between tanks. Machine has 6 station, 2 for washing, 2 for rinsing , 1 drying and 1 vakuum drying. Lodpjd I A Sgofx Ackjab Machine body is fully jacketed and operation can be observed via the glass panel. Tanks dimensions : 275 x 420 x 260 (mm) Basket dimensions : 180 x 280 x 150 (mm) Machine external dimensions : 1285 x 3465 x 2150 (mm) Ideal for dental implant manufacturers ultrasonic cleaner, precise ultrasonic cleaner, precise washing, precise cleaning, implant washing machine, robot ultrasonic cleaner, fully automatic ultrasonic cleaner Please feel free to contact with us for other details.

Year of construction: 2023, condition: new, EVYESONIC is an embedded ultrasonic cleaner which can be used in any kitchen. It is very easy to use and safe. It has 3 predetermined operating modes and can be set easily. You can use EVYESONIK for fruit, vegetable cleaning as well as baby products like nursery bottles. Please watch our video and do not hesitate to contact with us for other details. Ljdpfsd N S Eksx Ackoab

Year of construction: 2023, condition: new, Ultrasonic filter cleaning machine, provides perfect cleaning for any type of filters. Easiest, safest and quickest method for cleaning your filters. Tailor made design for tank capacity and basket size. Constructed with AISI 304 stainless steel (AISI 316 is also available on demand) Timer for ultrasonic power. Automatic or manual liquid fill / discharge Laodpfx Aod Izzzjckob Electrical heating with resistances. 28 Khz ultrasonic power. A lot of extras and options are available. Ultrasonic filter cleaning machine Please feel free to contact with us for other details.

Year of construction: 2023, condition: new, INTERSONIK is established in 1988 and since then manufacturing industrial cleaning machines both ultrasonic type and sprayed type. INTERSONIK always has high standards and aims to provide solid and durable products to its customers. Ultrasonic washing machines are designed and manufactured with the 30 year of experience and engineering that belongs to INTERSONIK from A to Z. K model ultrasonic cleaning devices are perfect parts washing systems for degreasing and precise cleaning. Laodpfx Aod Iz Dnecksb Some Details About Ultrasonic Machines: -28 Khz ultrasonic frequency -AISI 304 or AISI 316 Stainless Steel -Automatic fill valve -Liquid level control -Pump filter -Unlimited basket options -Unlimited size and number of tanks -Many other options and extras ultrasonic washing machine, ultrasonic cleaner, ultrasonic degreaser, ultrasonic for automotive, ultrasonic for coating industry, 28 Khz ultrasonic cleaner Please feel free to contact us for details and other choices.

Year of construction: 2023, condition: new, Ultrasonic cleaner with PLC, specially designed for medical needs. Capacity: 50 Liter Automatic filling: Available Automatic dosing: Available Lid: Pneumatic piston Lodpfx Ajfg Eqwocksab Programmable: Yes with PLC Liquid level control: Available ultrasonic cleaner, ultrasonic degreasing machine, ultrasonic washer, small ultrasonic washing machine, medical ultrasonic cleaner, automative