Used Universal Sharpening Machine for sale (65,527)

Condition: used, Year of construction: 1982, x-travel 300 mm y-travel 160 mm z-travel 340 mm feeds -stepless- 5-500 mm/min rapid traverse 1200 mm/min spindle turning speed range 40 - 2000 U/min tool taper Normkegel 40 table length 600 mm table width 120 mm voltage 380 V frequency 50 Hz rated current 13 A weight of the machine ca. 0,750 t dimensions of the machine ca. 1,8 x 1,5 x 1,8 m Lodpfx Abjvvnfuocshd DESCRIPTION Machine incl: active three-axis digital readout HEIDENHAIN documentation various tool holders Machine vice etc.

Condition: used, Year of construction: 2011, Technical details: x-travel: 8500 mm y-travel: 2000 mm z-travel: 1500 mm rapid travel x/y/z: 25 m/min table-size: 10.000 x 1.350 mm table load: max. 5 t/qm universal head: orthogonal 1° x 1° tool taper: SK 50 milling head speed: 4.000 1/min power capacity: 37 kW max. torque on the spindle: 900 Nm internal coolant system feed: 15 bar control: HEIDENHAIN iTNC 530 Tool changer: 60 Pos. total power requirement: 75 KW dimensions of the machine ca.: 12,7 x 5,2 x 4,6 m weight of the machine ca.: 35 t universal travelling column - universal machining center, orthogonal milling head, water-cooled, with 1° indexing in 2 axis (360 pos. in rear layer, 270 pos. in front layer) 3D touch probe M&H 20.41, dividing wall for 2 table machining, internal air blast, 15bar high pressure pump, prepared for HSC milling heads incl. torque support, moveable operator-cabin/panel, chipconveyor, handwheel HR 410, controlled security fence, Ljdpfx Aoytrw Tsbcjhd miscellaneous accessories (angle milling heads, vices...) on request approx. 39.000h "machine on", approx. 16.000h "spindle on" still under power in closed factory *

Condition: used, Year of construction: 1983, Technical details: Lhjdpfjwgdz Esx Abcjd x-travel: 560 mm y-travel: 500 mm z-travel: 450 mm

Condition: used, Year of construction: 1992, x-travel 1200 mm y-travel 300 mm z-travel 420 mm Table dimensions 360 x 1600 mm Year 1992 ja ja spindle turning speed range 32-1600 U/min vertical stroke 300 mm total power requirement 7,5 kW Lhodpfxeyt R R Es Abcsd weight of the machine ca. 3,400 t dimensions of the machine ca. ca. 2,38 x 1,79 x 1,94 m

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1400x1300x1800 mm Weight 0 kg Ledpfx Aov A Hgkobcshd Total power requirement 2,2 kw

Condition: ready for operation (used), Year of construction: 2026, operating hours: 16 h, functionality: fully functional, machine/vehicle number: 2026 / 508, coolant pump power: 1,100 W, grinding wheel diameter: 250 mm, workpiece weight (max.): 1,200 kg, warranty duration: 12 months, spindle speed (max.): 4,800 rpm, disc diameter: 250 mm, grinding spindle motor power: 800 W, grinding wheel bore: 32 mm, CNC Band Saw Blades Grinder NBS 300 is ideal for the sharpening of stellite, CV, bimetal and carbide-tipped band saw blades up to 300 mm wide. It operates with ceramic, CBN or diamond grinding wheels using water cooling. Driven diamond dressing wheel with automatic cycle is installed in order to keep the shape of ceramic stone clean and consistent. Thanks to this, the stable and consistent tooth shape of the sharpened blade is ensured. The grinding cycle is controlled via CNC servo motors; with the result that the saw tooth dynamics remain consistent. CNC Band Saw Blades Grinder NBS 300 incorporates a coolant reservoir and spray system which helps to keep the saw blades cool during grinding. Lodpsyv D N Isfx Abcohd Why are our sharpeners unique ? 1. Adjustment time savings 2. Grinding stones savings 3. Perfect, precise cutting edge and improved the quality of wood cutting 4. Extended life of your tools 5. Issues with professional staff or machine operators ? No need to worry 6. The flexibility of automatic sharpener

Condition: new, Year of construction: 2026, functionality: fully functional, feed length X-axis: 1,300 mm, feed length Y-axis: 320 mm, feed length Z-axis: 450 mm, total height: 2,000 mm, total width: 2,100 mm, total length: 2,520 mm, table width: 360 mm, table length: 1,600 mm, type of input current: three-phase, table load: 500 kg, overall weight: 2,800 kg, input voltage: 400 V, warranty duration: 12 months, Equipment: documentation/manual, Vertical Milling Machine Vertical milling machines are characterized by the ability to move the entire spindle head along the column guideways. This machine is ideally suited for machining tools, fixtures, and engine components. Features Vibration-damping cast iron construction reducing vibrations and oscillations Protective guards compliant with current safety standards Automatic feed on all three axes Rapid feed on all three axes Digital display (DRO) Infinitely variable feed rate Servo drives ensuring precise and safe operation Large worktable with high load capacity Hardened and ground gears significantly reducing noise Central lubrication system Functional control panel for intuitive operation Adjustable head angle allowing various machining positions Table guard available as optional equipment. Technical Specifications Parameter Specification Table size 1600 × 360 mm Lhsdpfx Abjyuculeced Maximum table load 500 kg Table swivel angle -45° / +45° X/Y/Z travel 1300 / 320 / 450 mm X-axis feed rate 30–750 mm/min Y-axis feed rate 20–500 mm/min Z-axis feed rate 15–375 mm/min Rapid feed X/Y/Z 1200 / 800 / 600 mm/min T-slots 3 / 18 / 80 mm Spindle taper Horizontal ISO50 / Vertical ISO50 Upper ram travel 550 mm Distance between vertical spindle and table 196–646 mm Distance between horizontal spindle and table 20–470 mm Vertical spindle speed (12) 60–1750 rpm Horizontal spindle speed (12) 60–1800 rpm Vertical spindle motor 4.0 kW Horizontal spindle motor 5.5 kW Feed motor power X/Y/Z 1.5 / 1.5 / 1.5 kW Servo drive 10 Nm Dimensions (L × W × H) 2520 × 2100 × 2000 mm Weight 2800 kg

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, saw blade diameter: 850 mm, saw blade bore: 10 mm, TECHNICAL DETAILS Saw Blade Diameter (without loader): 80 – 850 mm Saw Blade Diameter (with loader): 250 – 450 mm Ledpfxoypbx Ej Abcohd Bore Diameter (from): 10 mm Saw Blade Magazine: Up to 40 pieces Control and Software Control: Industrial PC with Siemens standard PLC Software: For all tooth geometries, including special profiles Grinding Process Sequence 1st Step: After starting, the vacuum gripper picks the top saw blade from magazine 1 and transfers it to the Woodtronic NC4; the cover opens. 2nd Step: Loader returns. The Woodtronic NC4 closes and the grinding program starts. The loader removes the intermediate ring from magazine 1 and loads it into magazine 2. Wait position. 3rd Step: After grinding and opening of the Woodtronic, the loader takes the sharpened saw blade and transfers it to magazine 2. Process Repetition Steps 1 to 3 are repeated until the grinding cycle is complete. Pre-programming possible: The grinding operation continues without interruption, even while programming the next magazine. The Woodtronic NC4 can be preprogrammed during the day and will grind automatically overnight. Measurable with WALTER Saw Check: Rake angles, clearance angles, diameter, number of teeth Tooth geometry: manual input required MACHINE DETAILS Operating hours: 4,197 h (according to previous operator, information unverified) FEATURES - Automatic loader - Walter Saw Check - Measuring device for carbide-tipped circular saw blades

Condition: ready for operation (used), Year of construction: 2006, General Data Machine weight 18000 kg Main Drive Lodsx D D Uqopfx Abcshd Spindle speed range 17500 Number of axis 5 Movement X-Axis Movement 600 mm X-Axis Rapid Traverse 45 m/min Y-Axis Movement 600 (975) mm Y-Axis Rapid Traverse 45 m/min Z-Axis Movement 500 mm Z-Axis Rapid Traverse 45 m/min Tools Type of tool holder HSK A63 Media Chip conveyor Yes Additional Equipment Double Tool Change Table 2 NC-Controlled Swivel Units 4 NC-Controlled Rotary Tables KNOLL Coolant System 70 Bar High-Pressure Pump Chip Conveyor 2 Swivel Units for Clamping Bridge This 5-axis EMAG BAW 06-22 double-spindle machining center in 5-axis design (on both sides) was manufactured in 2006. It features double spindle machining, a 600 mm spindle distance, and X/Y/Z travels of 600/975/500 mm. The machine includes a high-speed milling spindle at 17,500 rpm, dual 72-unit tool magazines, and a robust HSK A63 tool holder. Additional features include a KNOLL coolant system, 70 bar high-pressure pump, and a chip conveyor. If you are looking to get high-quality milling capabilities consider the EMAG BAW 06-22 machine we have for sale. Contact us for more information. Application Types Milling

Condition: like new (used), Year of construction: 2025, operating hours: 100 h, functionality: fully functional, travel distance X-axis: 620 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 460 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 36 m/min, nominal power (apparent): 45 kVA, torque: 180 Nm, controller manufacturer: Heidenhain, controller model: TNC640, workpiece height (max.): 430 mm, workpiece diameter (max.): 580 mm, workpiece weight (max.): 300 kg, total height: 3,300 mm, total length: 3,225 mm, total width: 2,256 mm, table load: 300 kg, rotary table diameter: 500 mm, overall weight: 8,500 kg, spindle speed (min.): 5 rpm, spindle speed (max.): 15,000 rpm, operating hours of spindle: 40 h, coolant supply: 42 bar, distance table center to spindle nose: 150 mm, spindle motor power: 3,400 W, number of spindles: 1, number of slots in tool magazine: 60, tool length: 250 mm, tool diameter: 127 mm, tool weight: 7,000 g, coolant supply through spindle: 42 bar, swivel angle B-axis (min.): -50 °, swivel angle B-axis (max.): 110 °, swivel angle C-axis (max.): 360 °, number of axes: 5, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Demonstration machine Equipment of Axon LU 620 - Heidenhain TNC640 - 5-axis simultaneous machining - Heidenhain glass scales on all 5 axes - Kinematic Optimizer - 15,000 rpm Direct Drive spindle with 34KW and max. 180Nm (25% duty cycle) - Production package I with 42 bar ICS (internal coolant supply) - Air through the spindle - Media supply through the center of the table Ledpfxeywyrbo Abcohd - Automatic workpiece measurement Renishaw OMP 40 - Laser tool breakage control Blum NT A-3 Split - Paper band filter system - Ring flushing system at the spindle - Automatic side door - 90 magazine stations - HSK63 - Scraper belt chip conveyor - Chip flushing - Extraction system

Condition: like new (used), Year of construction: 2024, operating hours: 100 h, functionality: fully functional, travel distance X-axis: 620 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 460 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 36 m/min, nominal power (apparent): 45 kVA, torque: 180 Nm, controller manufacturer: Heidenhain, controller model: TNC640, workpiece height (max.): 430 mm, workpiece diameter (max.): 580 mm, workpiece weight (max.): 300 kg, total height: 3,300 mm, total length: 3,225 mm, total width: 2,256 mm, table load: 300 kg, rotary table diameter: 500 mm, overall weight: 8,500 kg, spindle speed (min.): 5 rpm, spindle speed (max.): 15,000 rpm, operating hours of spindle: 40 h, coolant supply: 42 bar, distance table center to spindle nose: 150 mm, spindle motor power: 3,400 W, number of spindles: 1, number of slots in tool magazine: 60, tool length: 250 mm, tool diameter: 127 mm, tool weight: 7,000 g, coolant supply through spindle: 42 bar, swivel angle B-axis (min.): -50 °, swivel angle B-axis (max.): 110 °, swivel angle C-axis (max.): 360 °, number of axes: 5, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Demonstration machine Equipment of the Axon LU 620 Lhedpfxoywyqke Abcjd - Heidenhain TNC640 - 5-axis simultaneous - Heidenhain glass scales on all 5 axes - Kinematic Optimizer - 15,000 rpm Direct Drive spindle with 34 kW and max. 180 Nm (25% duty cycle) - Production package I with 42 bar through-coolant (IKZ) - Air through the spindle - Media feed through the center of the table - Automatic workpiece measurement Renishaw OMP 40 - Laser tool breakage control Blum NT A-3 Split - Paper band filter system - Spindle ring flushing system - Automatic side door - 60 magazine positions - SK40 - Scraper-type chip conveyor - Chip flushing - Extraction system

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, We offer you the following: Manufacturer: DMG Mori Model: CMX 50 U Year of manufacture: 2019 Control unit: Slimline Siemens Operate Travel distances: X-axis: 500 mm Y-axis: 450 mm Z-axis: 400 mm B-axis: -5 to +110 ° C-axis: 360 ° Main spindle: Tool holder: SK 40 Spindle speed range: 20 - 12,000 rpm Main spindle drive power (100/40%): 13 / 9 kW Lhodpfoywlkcox Abced Working table: Table size: D 630 x 500 mm Tool changer: Number of tool pockets: 30 positions Rapid traverse rates: Rapid traverse (X/Y/Z): 30 m/min Operating hours: approx. 7,070 h Spindle hours: approx. 2,800 h Technical features & accessories: - Direct linear measuring system in x, y, and z axes, including air purge - Air blow switching via M function - Production package, consisting of: - Internal coolant supply 12 bar - Chip conveyor, 250 l tank - Bed flushing via M function - Coolant spray gun - Machine enclosure roof - 4-color signal lamp - Renishaw measuring kit, consisting of: - Touch probe PP40 - Tool measurement TS27R - Tool breakage monitoring - Calibration tool - Preparation for 3DquickSET Accessories, tools, and clamping devices shown are only included in the scope of delivery if specified in the additional information. Technical data and specifications are subject to change and errors. Prior sale reserved!

Condition: used, Technical details: grinding diameter: 600 mm grinding length: 2600 mm centre height: 180 mm workpiece diameter - max.: 360 mm swing diameter: 600 mm grinding wheel diameter: 600 x 305 x 160 mm total power requirement: 17,6 kW coolant device: 90 l/min work piece spindle speed: 12,5-250 U/min feed continuous: 0,05 - 6,0 mm weight of the machine ca.: 8,2 t dimension machine xH: 6,4 x 2,2 x 1,9 mm Final balance balancing device Tailstock with cylinder error correction Digital display X=0.001 - Z=0.01 Radius device 2-10 mm Lsdjw Rktbopfx Abcohd *

Condition: excellent (used), Year of construction: 2014, operating hours: 11,440 h, DMG 5 axis Simultaneous HSC 30 Linear Year 2014 Heidenhian TNC640 Control Travel X320 / Y 300 / Z280mm B axis +/- 120 degree C axis 360 x 0.001 degree HSK-E40, 40,000rpm Swivel rotary table Touch Probe BLUM Tool Measuring system 3D Quick Set Application Tuning Cycle Air Blast through spindle Super Fine filter system Lhsdpfxew Hxiwe Abcjd c/w tooling ----- Clearance Sales -----

Condition: used, CNC Universal Tool Grinding Machine SCHÜTTE Type BU 400 CNC 4 Machine - defective - without control system Machine not operational - electrically non-functional - without CNC controller Serial No.: Year of manufacture: 1990 4 axes (X, Y, Z, and R) Table clamping surface 1300 x 250 mm Distance between centers 700 mm Center height 155 mm Grinding length (X-axis) max. 400 mm Grinding width (Y-axis) max. 260 mm Grinding spindle speed max. 6000 rpm Ljdpfx Abjd Rmcmecshd Grinding spindle drive 3 kW Power supply 380 Volt, 50 Hz, 25 Amp. - CNC control system removed Required space L x W x H 3800 x 2400 x 2300 mm Weight 3000 kg Machine not functional, CNC control is missing. Mechanically in good condition, ideal for control retrofit Suitable as a spare parts donor or for rebuild with new control system

Condition: used, Universal Tool Milling Machine DECKEL Type FP 1 Machine No. 51265 Year of manufacture: approx. 1967 Travel paths X: 300 mm Y: 150 mm Z: 340 mm Table size 600 x 200 mm Spindle taper SK 40 - S20 x 2 Spindle speed 40–2000 rpm, 16 steps Motor power 1.0 and 1.6 kW, pole-changing Lhodpoghtvaofx Abcsd Power supply 380 Volt, 50 Hz - Feed on X and Z axes - Spindle speed via 2 motor speeds and 8 gear steps - Quill movement at vertical milling head 60 mm - Swiveling, rotating, and tilting angle table - Coolant pump in machine base - Separate control cabinet Space requirements L x W x H 1100 x 1100 x 1600 mm Weight 690 kg In good condition

Condition: excellent (used), Year of construction: 1998, Heidenhain TNC 426 control Ljdeyrirrepfx Abcohd Travel X/Y/Z: 600/450/450 mm Spindle speed 10,000 rpm Tool magazine for 30 tools, SK 40

Condition: used, Year of construction: 2004, grinding diameter 250 mm grinding length 650 mm centre height 125 mm Maschine wird mit Wartung und neuer Geometrie verkauft Betriebsstunden bisher 12260 Lhjdpjywntyjfx Abced Reitstock mit Feinverstellung Schleifspindelstock schwenkbar mit 5° Hirtverzahnung Papierbandfilter Marposs Messeinrichtung Innenschleifeinrichtung

Condition: excellent (used), Year of construction: 1998, Frame Dowel and Slot Mortising Machine by Hofmann HT 200 U with angle adjustment Specialized drilling machine for staircase construction, window manufacturing, and universal applications, featuring pneumatic height adjustment. Angled doweling and spindle boring for balusters can be easily performed thanks to the rotatable drilling unit. Motor with pole-changing capability, two speeds Motor power 1.5 / 1.8 kW, 1400 / 2800 rpm Motor start via convenient handle switch Ledpfjyfta Tex Abcohd Precision chuck with two inserts: 16mm and M10 thread Table size approx. 1100 x 240mm Linear laser for precise positioning of the workpiece Drilling unit can swivel 65° to the left and right Pneumatic adjustment of the working height, doweling on two levels without repositioning Desired drilling heights can be set for each level using a handwheel and digital counter; switchover is then performed pneumatically from the front Cross adjustment approx. 320mm, stepless or in 12mm increments Drilling stroke approx. 200mm 2 pneumatic workpiece clamps, positionable at the front and rear of the table 2 swivel workpiece supports 2 side stops, also usable as front supports Mobile base Extraction port 80mm 4 used but good drill bits: 9, 12, 16, 19mm Minor paint touch-ups; excellent condition—see original photos A used swivel slot mortising machine in this condition is very rarely available. CE mark User manual Dimensions approx. 1200 x 1200 x 1200mm (LxWxH), weight 310kg. The machine can be demonstrated by appointment at our premises. We only offer machines that are ready for demonstration in our warehouse—see "other offers from this seller."

Condition: new, functionality: fully functional, feed length X-axis: 1,200 mm, feed length Y-axis: 700 mm, feed length Z-axis: 500 mm, table length: 1,600 mm, table width: 500 mm, Fully operational, heavy-duty FU series milling machines equipped with infinitely variable feed speed control on all 3 axes, including rapid traverse mode, and a 3-axis digital display. The FU line features a multi-universal milling head with 360-degree rotation. Electrical components supplied by the renowned Schneider Electric. ISO 50 spindle taper, table size 1600x500 mm. Equipped with a class-leading SERVO axis feed drive. Key Features: - Infinitely variable feed speed adjustment on all 3 axes, with rapid traverse in all axes - Universal milling head with patented "HURON" system, adjustable at any angle - Swiveling control panel with ergonomically arranged switches - Heavy-duty, solid cast iron construction ensuring vibration-free operation - All guideways are hardened and ground - Precision ball screws on all axes for enhanced machining accuracy - Centralized lubrication system - Automatic table feed for X, Y, Z axes, including rapid feed for all axes - Large, robust T-slotted table designed for maximum loads - 3-axis digital display ensures maximum work efficiency - Safety guards complying with the latest CE standards - Quiet operation due to ground and hardened gears in the oil-bath gearbox - State-of-the-art axis feed technology - High performance maintained even under heavy load - Precision and dynamics on par with modern CNC machines - Greatly reduced backlash for exceptional accuracy - Integral actuator characteristics, delivering a theoretically zero static error - Thanks to feedback, the servo drive can detect overload or positional errors. Upon such detection, the controller immediately halts all machine axes. Technical Specifications: - Table size (width): 1600 mm - Table size (depth): 500 mm - Spindle taper: ISO 50 - Spindle speed range: 30 – 2050 rpm - Number of spindle speeds / Infinitely variable: 27 - Travel X-axis: 1200 mm - Travel Y-axis: 700 mm - Travel Z-axis: 500 mm - Spindle to table distance: 50 – 550 mm - Spindle to column min.: 28 mm - Spindle to column max.: 728 mm - Max. table load: 1800 kg - Automatic feed X-axis: 10 – 1000 mm/min - Automatic feed Y-axis: 10 – 1000 mm/min - Automatic feed Z-axis: 5 – 500 mm/min Lhedpoytffqjfx Abcsd - Rapid traverse X, Y, Z: 2200 / 2200 / 1100 mm/min - T-slots (quantity, size, spacing): 5 / 18 / 80 mm - Motor power: 7.5 kW - Dimensions (width): 2200 mm - Dimensions (depth): 2285 mm - Dimensions (height): 2100 mm - Weight approx.: 4500 kg Scope of Delivery: - LED work lighting - Cooling system - Centralized lubrication - Table feed for X, Y, Z axes - Coolant tray - 3-axis digital display - Adjustable guards with modern safety features - Service tools - Servo drive - Legally required safety guards - Complete DTR technical documentation (Polish) - CE certificate - 24-month comprehensive warranty at no additional cost

Condition: new, functionality: fully functional, feed length X-axis: 590 mm, feed length Y-axis: 180 mm, feed length Z-axis: 320 mm, Powerful universal milling machine UWF 80 E designed for professional craftsmen and specialists. Equipped with two spindles – horizontal and vertical. Large clamping table surface of 1000 x 240 mm, additionally tiltable within a range of +/-45°. Automatic feed for X and Y axes. Swiveling head +/-90°. 3-axis digital display. Schneider Electric electrical system. ISO 40 taper. Features: - Capability for both vertical and horizontal milling – extends the application range - Milling table tiltable by 45° to the right and left - Quiet operation with ball bearings ensures excellent concentricity - Easy spindle speed adjustment - Swiveling milling head from -90° to +90° - Large clamping table area: 1000 x 240 mm - Automatic feed for X and Y axes, including rapid traverse for X axis - Milling: spindle feed set via handwheel - Drilling: spindle feed set via feed lever - Quick-switching clutch between automatic and manual spindle feed - Right and left spindle rotation for thread cutting - Dovetail guides - Precision cross table with T-slots - 3-axis digital display included Technical specifications: - Table size (width): 1000 mm - Table size (depth): 240 mm - Spindle taper: ISO 40 - Spindle speed min: 115 rpm - Spindle speed max: 1750 rpm - Horizontal spindle speed min: 60 rpm - Horizontal spindle speed max: 1350 rpm - Speed change – number of steps/stepless: vertical – 8, horizontal – 9 - Quill stroke: 125 mm - Travel in X axis: 590 mm - Travel in Y axis: 180 mm - Travel in Z axis: 320 mm - Spindle to table distance: 0 – 375 mm - Spindle to column min. distance: 230 mm - Spindle to column max. distance: 685 mm - Table swivel: -45° to +45° - Milling head tilt: -90° to +90° - Automatic feed X axis: (8) 32 – 700 mm/min - Automatic feed Y axis: stepless mm/min - Number/size/spacing of T-slots: 16 mm - Motor power: 1.5 kW - Motor power S1 100%: 0.85 kW - Second spindle motor power: 1.5 kW - Dimensions (width): 1500 mm - Dimensions (depth): 1430 mm - Dimensions (height): 2100 mm - Weight approx.: 980 kg Scope of delivery: - 3-axis digital display ES 12H - M16 drawbar - LED lighting - Coolant system - Automatic table feed for X axis - Automatic table feed for Y axis - Reducing sleeve ISO 40 / MT3 - Reducing sleeve ISO 40 / MT2 - Reducing sleeve ISO 40 / B18 Lhodpfxsytfcvs Abcsd - Long milling arbor 27 mm - Horizontal support - Legally required safety covers - Full technical documentation (DTR) in Polish - CE certificate - 24-month warranty for all components at no extra charge

Condition: ready for operation (used), functionality: fully functional, Specifications Manufacturer: Deckel Model: SOE Condition: Used Stock number: 00662 Lodjytfbxjpfx Abcshd

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,250 mm, rapid traverse X-axis: 70 m/min, rapid traverse Y-axis: 70 m/min, rapid traverse Z-axis: 40 m/min, feed rate X-axis: 70 m/min, feed rate Y-axis: 70 m/min, feed rate Z-axis: 40 m/min, torque: 12 Nm, controller manufacturer: Heidenhain, controller model: iTNC 640, table width: 3,000 mm, table height: 80 mm, table length: 2,000 mm, spindle speed (max.): 24,000 rpm, spindle motor power: 15,000 W, Initial commissioning: 2019 Control system: Heidenhain iTNC 640 incl. handwheel X-axis: approx. 3,000 mm Y-axis: approx. 2,000 mm Z-axis: approx. 1,250 mm A-axis: ± 96° C-axis: ± 270° Clamping table: 3,000 x 2,000 x 80 mm, T-slots 18H12 / 250 mm 2-axis milling head Spindle power: 15 kW Spindle speed: max. 24,000 rpm Torque: max. 12 Nm Tool holder: HSK 63F Drive linear axes Feed rate for X, Y, and Z-axes: up to 70 m/min / 40 m/min Connection data Voltage: 400 V Frequency: 50 Hz Main fuse: 63 A Power requirement: 35 kW Dimensions, weights Total weight: approx. 15,000 kg Additional equipment Lhodpeyrdnnefx Abcod - Minimum quantity lubrication - 2x 12-position tool changers - Enclosure of working area Optional at extra cost: - Blum laser tool measurement - Extraction system Machine condition Fully functional, in very good condition. Can be inspected under power.

Condition: used, Year of construction: 2006, x-travel 1.000 mm y-travel 1.000 mm z-travel 1.200 mm C-axis 360 x 0,001 ° A - axis ° Lhodpfx Absw E Nnnocsd Control SINUMERIK 840D Powerline SIEMENS Size of table plate 900 x 700 mm milling spindle - taper HSK - A100 spindle turning speed - stepless 12000 U/min toolpiece magazine: chain magazine 180 Stück total power requirement 85 kW weight of the machine ca. 20,5 t dimensions of the machine ca. 6,5 x 6,1 x 3,5 m 5-axis machining center with horizontal milling spindle arrangement SIEMENS SINUMERIK 840D Powerline control system Electronic handwheel NC swivel rotary table Rotoclear window Measuring probe ready Blum laser tool measurement Vibration sensor Tool taper cleaning 4th operating mode Internal coolant system with 2 pumps, 40 bar and 80 bar Chip conveyor Belt filter system Mist and smoke separator Cooling/heating unit

Condition: good (used), Year of construction: 2001, operating hours: 54,057 h, Manufacturer: HERMLE | Model: U 1000 T | Year of manufacture: 2001 | Operating hours: approx. 54,057 | Universal milling and drilling machine | CNC control (TNC 426) | Automated tool clamping | Precision motion guidance | Dimensions: approx. 3,600 mm x 2,450 mm x 2,800 mm (W x H x L) | The stated dimensions are approximate values. All other information provided without guarantee. | Grey | Steel Lhodpjyic R Tsfx Abcsd