Used Universal Sharpening Machine for sale (65,673)

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 475 mm, feed rate X-axis: 42,000 m/min, feed rate Y-axis: 42,000 m/min, feed rate Z-axis: 42,000 m/min, controller manufacturer: Siemens, controller model: 840d, total height: 2,750 mm, total length: 2,850 mm, total width: 2,350 mm, rotational speed (max.): 20,000 rpm, overall weight: 7,500 kg, spindle speed (max.): 20,000 rpm, operating hours of spindle: 13,300 h, coolant supply: 40 bar, number of spindles: 1, number of slots in tool magazine: 30, Equipment: chip conveyor, For sale: a DMU 50 3rd generation. The machine was on display in the DMG showroom from 2019 to October 2021. The following features are included: CELOS with Siemens 840D sl Operate Tool magazine with 30 positions, HSK-A63 Direct path measuring system IKZ/chip conveyor package, IKZ 40 bar, 600 liter belt filter system Coolant/air blow-off switchover Work area flushing Double-layer filter, 25 µm Rotating viewing window Spindle speed: 20,000 rpm Flushing gun for chip removal Oil and emulsion separator Measuring probe, infrared TS649 Laser tool measurement 3D Quick SET MPC Machine Protection Control Signal light, 4-color Cooling unit for control cabinet DXF Reader Operating mode 4 Electronic handwheel DMG Mori Netservice IoT Connector Tsdpfxe Aaz Nne Airjd Service Agent (Celeos) Messenger (Celos)

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, spindle bore: 95 mm, turning diameter: 930 mm, turning diameter over bed slide: 930 mm, turning diameter over top slide: 650 mm, turning length: 4,000 mm, total length: 6,500 mm, total width: 1,800 mm, total height: 1,800 mm, spindle speed (max.): 800 rpm, spindle speed (min.): 8 rpm, overall weight: 6,400 kg, The PORĘBA TPK-90A1/4M universal lathe has been comprehensively rebuilt and modernized, has technical parameters in accordance with the technical and operational documentation DTR of a new machine, WOT technical acceptance conditions and the Polish Standard and also meets EU requirements. The machine is covered by a full 12-month warranty on spare parts and electrical components. Availability: available within 3 to 3,5 months, general overhaul Technical data: - distance between centers/turning length: 4000 mm - turning diameter over bed: 930 mm - turning diameter over support: 650 mm - turning diameter in bridge recess: 1200 mm - power on compound slide - spindle bore diameter: 95 mm - maximum workpiece weight between centers: 6,000 kg - maximum workpiece weight between centers + 1 steady: 7,500 kg - maximum workpiece weight between centers + 2 steadies: 9,000 kg - number of spindle speeds: 21 - range of rotational speeds (rpm): 8 - 800 - number of feeds: 80 - range of feeds (mm/rev): longitudinal: 0.1 – 12,8 transverse: 0.05 – 6,4 - engine power: 16/22 kW (1st gear / 2nd gear) - overall dimensions: total length: 6500 mm width: 1800 mm Tedpfx Aioykzvysred height: 1865 mm total weight: 6400 kg Standard equipment: tailstock, coolant pump, tool post, chuck cover, (no steady rests) Additional equipment available at extra charge: - 3- or 4-jaw chucks, various diameters and variants - Digital readout on 2 axes with assembly and calibration - Steady rest, 40-400 mm, with rollers - Steady rest, 400-700 mm, with rollers - MULTIFIX quick change tool post

Condition: excellent (used), Year of construction: 2020, Traverses X Y Z: 500 x 450 x 400mm, Todpez R Nv Hefx Airsd Table size 500 x 630mm, C axis 360, B Axis -5 / +110°, maximum workpiece diameter 630mm, maximum workpiece height 550mm table load 200kgs, Spindle taper BT40, 19kW Spindle Motor, Spindle Speed 12,000rpm, Heidenhain Control, 30 Station ATC, spindle probe, Swarf conveyor, through spindle coolant

Condition: excellent (used), Year of construction: 2014, TOOL SHARPENING MACHINE FOR FULLY-AUTOMATIC SHARPENING OF STRAIGHT KNIVES TECHNICAL DATA MAX. TOOL WIDTH: 330 MM EXTENDED (OPTIONAL): 460 MM WITH POWERLOCK: 322 MM TOOL RADIUS: 100 - 300 MM EXTENDED (OPTIONAL): 140 - 340 MM WITH POWERLOCK: 100 - 250 MM SANDING DISC DIAMETER: 125 - 200 MM SPINDLE RPM: 4600 RPM FREQUENCY CONTROLLED: 1500 - 4600 U/MIN Tjdpo Ad U U Ejfx Airjd

Condition: used, Year of construction: 1979, functionality: fully functional, Ideal for sharpening lathe tools, drills, milling cutters, and other tools – a classic product of German engineering for ambitious hobbyists or workshop use. Technical specifications: Todpo Afp Ensfx Aired • Motor No. 10651 • Power: 0.55 / 0.92 kW • Speed: 1400 / 2800 rpm • 380 V, 50 Hz • Cross slide with handwheels, swivel head with clamping device • Bellows covers for the guides • Incl. work light Please feel free to contact us if you have any questions!

Condition: excellent (used), Year of construction: 1998, Hofmann HT 200 U frame dowel and elongated hole drilling machine with angle adjustment. Special drilling machine for staircase construction, window construction, and universal applications due to pneumatic height adjustment. Angled dowel drilling and picket drilling can be easily realized thanks to the rotatable drilling unit. Motor with pole change, two speeds Motor power 1.5 / 1.8 kW, 1400 / 2800 rpm Motor start with a practical handle switch Precision chuck with two inserts, 16 mm and M10 thread Table size approx. 1100 x 240 mm Linear laser for precise positioning of the workpiece Drilling unit can be rotated 65 degrees to the left and right Pneumatic adjustment of the machining height, dowel drilling on two levels without retooling The desired drilling heights can be set for each drilling level using a handwheel and digital counter; switching is then done pneumatically from the front Cross adjustment approx. 320 mm, stepless or in a 12 mm grid Drilling stroke approx. 200 mm 2 pneumatic workpiece clamps, can be placed on the table at the front and rear 2 swivel workpiece supports 2 side stops, also usable as a front support Undercarriage Dust extraction connection 80 mm 4 used but good drills 9, 12, 16, 19 mm Few paint spots have been touched up, very good condition, see original photos. A used swivel elongated hole drilling machine in this condition is rarely available. CE marking Operating manual Tsdpsyfta Tsfx Aired Dimensions approx. 1200 x 1200 x 1200 mm (L x W x H), weight 310 kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and are in our warehouse, see "other offers from this provider".

Condition: good (used), Year of construction: 2006, operating hours: 14,500 h, functionality: fully functional, FOR SALE MACHINING CENTER DMG DECKEL MAHO DMU 50 (5-Axis) Key feature: Only 14,690 actual spindle hours (PGM operation) for a 2006 machine. Mechanics are in very good condition. Main specifications: • Control: HEIDENHAIN iTNC 530 (with separate 3D screen) • Machining travels: X = 500 mm | Y = 450 mm | Z = 400 mm • Tilting rotary table: Ø 630 x 500 mm (B-axis: -5°/+110° | C-axis: 360°) • Max. table load: 200 kg • Tool magazine: 16 positions • Power supply: 400 V / Three-phase (Low consumption: 17 kVA) Included equipment: • Industrial precision vise (already installed and adjusted) • Separate electronic handwheel • Coolant system with adjustable nozzles Conditions: Tjdpfs Af Ap Hjx Airjd • Used machine, available for inspection in working order. • Removal and transport are the responsibility of the buyer. • Professional sale with invoice (VAT recoverable).

Condition: ready for operation (used), Year of construction: 1969, x-travel 700 / 710 mm y-travel 275 mm z-travel 350 mm taper in main spindle ISA 40 table surface area 900 x 250 mm T-slots 3 x 18 x 60 Stk. turning speeds 32.0 - 2000 U/min feed stepless 15 - 750 mm/min voltage 400 V total power requirement 4.0 kW weight of the machine ca. 1400 kg range L-W-H 1000 x 1400 x 1800 mm from a training workshop (vocational school) - in checked conditions - machinevideo - ?v=fKENsjnLZxY Tedpfszkbnzox Airod Features: - Robust, electric-motor-driven universal milling machine - With horizontal and vertical main spindles * Vertical main spindle can be swiveled 360° in two planes - Sturdy T-slot clamping table with 18 mm T-slots - Electric feed control - Stepless speed adjustment - Swiveling machine light - Control cabinet, installed on the right - Original operating instructions Machine data sheet

Condition: used, Year of construction: 2026, Universal cylindrical grinding machine Manufacturer: Fortuna Type: AFC 1500 A 45 Year of manufacture: unknown Grinding length: 1,500 mm Grinding wheel diameter: 500 mm Tsdpfxs Ady Drj Airod Largest workpiece diameter: 350 mm Largest grinding diameter: 350 mm Maximum workpiece weight between centers: approx. 300 kg 231026ä

Condition: used, Year of construction: 1969, functionality: fully functional, overall weight: 5,500 kg, arm length 1600 mm Tjdsx H Txtepfx Airjd taper MK 5 Würfel

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, machine/vehicle number: 137, total width: 2,800 mm, total length: 700 mm, total height: 1,700 mm, type of input current: three-phase, Band saw blade grinding machine Risstaler riv Rivo 200 GA Tsdpfx Ajz Uq E Asirod Year of manufacture 1984 Various tooth shapes can be selected Operating manual available Feed rate: 30 or 60 teeth per minute.

Condition: like new (used), Year of construction: 2015, operating hours: 1,000 h, functionality: fully functional, Equipment: documentation/manual, DMG MORI / SAUER GmbH ULTRASONIC 20 Tjdpfoz Tc Tvox Airjd Machine Data Control system Heidenhain Axes 5 (X / Y / Z / A / C) Travel ranges X / Y / Z 200 / 200 / 280 mm Spindle speed max. 42,000 rpm Tool holder HSK-E32 Tool magazine 24 Rotary table Ø 190 mm Table load capacity, center 10 kg A-axis -5° / +130° C-axis 360° Rapid traverse 40 m/min Footprint L × W × H 2,020 × 2,196 × 2,385 mm Fuse rating 63 A Feed drive X / Y / Z Synchronous linear motors Feed rate max. 40,000 mm/min Input resolution 0.001 mm C-axis speed max. 150 rpm Table clamping Pneumatic / mechanical Tool length max., from spindle nose 200 mm Tool diameter max., automatic tool changer 40 mm Compressed air supply 6–10 bar Air consumption without tool blowing 12 m³/h Additional consumption with continuous tool blowing 25 m³/h Connection, weight, and dimensions Electrical connection 400 V / 50–60 Hz Machine weight 3,900 kg Tool weight max., automatic tool changer 1 kg Total weight of magazine tools max. 24 kg Compressed air connection min. Ø 12 mm Equipment and scope of supply 15 tool holders and other related accessories as shown in the offer photos are included. Technical data is subject to change without notice. Errors and prior sale are reserved. The specifications and scope of supply agreed upon in the purchase contract shall be the basis.

Condition: excellent (used), Carbide saw double side grinder VOLLMER model MULTI DUO 2200 Tjdewdyg Sepfx Airsd

Condition: good (used), Year of construction: 2007, Universal machining center Machine type: Hermle C 50 U dynamic Control: Heidenhain iTNC 530 Year: 2007 SPECIFICATIONS X-Axis: 1.000 mm Y-Axis: 1.100 mm Z-Axis: 750 mm Rapid motion: (X/Y/Z): 60 / 60 / 55 m/min. B-Axes: ° Max. revolution: 10.000 rpm Todps Afxlqjfx Aired Spindle power: 12 / 23 kW Torque: 157 / 298 Nm Tool: HSK A 63 Tool capacity: 60 Table size: 1.150 mm SRT1150 mit V&B 20-fach 20 x Vischer & Bolli Flanschkassette 10kN, Art. Nr.: 750 160L Stichmaß 200 nach Freigabezeichnung. Absoluttoleranz über alle Flanschkassetten: +/- 0,01 mm Equipment Chip conveyor Internal cooling: 80 bar Electronical handwheel Tool measurement: Blum Oil mist separator: vorbereitet Chip rinsing pistol Caliper: Heidenhain TS 642 Genauigkeitspaket

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, 5-AXIS CNC MACHINING CENTER WEMAS VZG 72-5A (YEAR OF MANUFACTURE 2019) Travel ranges: X = 720 mm, Y = 600 mm, Z = 520 mm. 5-axis milling and drilling. Multi-sided machining in conjunction with a rotary table, ø 720 mm. 60-position tool changer, automatic workpiece measuring probe. Glass scales in all axes. SK 40 with 12,000 rpm and 80 bar internal coolant. Todpfx Aisz Ri Stjrjd

Condition: excellent (used), functionality: fully functional, 1x Universal milling machine Deckel FP4 NC Dialog 3 1x Universal milling machine Deckel FP4 NC Dialog 4 Manufacturer: Deckel Type: FP4 Condition: used, good ----- Travel ranges: X-axis: approx. 500 mm Todpe Acd Tbefx Aired Y-axis: approx. 400 mm Z-axis: approx. 400 mm Table clamping surface: approx. 700 x 400 mm Speed range: approx. 50 – 2500 rpm Tool holder: ISO 40 ----- Tool clamping: hydraulic Drive power: approx. 6.0 kW Feeds and rapid traverses: in all 3 axes Feed range: approx. 8 – 630 mm/min Rapid traverses: approx. 3.0 m/min ----- L x W x H: approx. 2300 x 1800 x 1800 mm Weight: approx. 1750 kg *Machine light *Spindle guard Scope of delivery: * 5x tool holders * Allmatic vise * Walter dividing head * Documentation * Spindle guard

Condition: as good as new (ex-display), Year of construction: 2025, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,400 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, workpiece weight (max.): 6,000 kg, rotational speed (max.): 10,000 rpm, tool length: 800 mm, New machine HDC3000 with 6 axes • Travel ranges: X=3000 mm, Y=1500 mm, Z=1400 mm • Heidenhain iTNC 640 with handwheel • NC rotary table for 5-sided machining 1250 mm x 1600 mm • 2-axis NC universal drilling and milling head, fully simultaneous and positioning operation • Spindle 10,000 rpm HSK100, S1=220 Nm spindle torque • Tool change system HSK100 / 60 stations – 800 mm tool length • Chip conveyor • Optimized for 5-sided machining including deep hole drilling • Coolant supply system • Internal/external air blow-off device • ICS 60 bar for deep hole machining • Fully enclosed Tsdpe Af Ultofx Airsd • Large interference circle 2300 mm • Including mounts • Including wash gun • Including warranty • Short delivery time, subject to prior sale

Condition: not inspected (used), travel distance X-axis: 400 mm, travel distance Y-axis: 315 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 3,150 rpm, Universal Tool Room Milling Machine Manufacturer: DECKEL Model: FP3NC Control System: Dialog 4 Technical Specifications: - X-axis travel: 400 mm Tedpfx Aiszz S Rnsrjd - Y-axis travel: 315 mm - Z-axis travel: 400 mm - Spindle speed: 3,150 rpm Condition: used, untested In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and work-holding devices shown are included in the scope of delivery only if specified in the additional information. Subject to technical changes, errors, and prior sale.

Condition: good (used), Year of construction: 1995, functionality: fully functional, SHW UF 31, year of manufacture 1995, Heidenhain TNC 415 B control, travel X/Y/Z 1000/700/625 mm, feed rate X/Y/Z 2,000 mm/min, rapid traverse X/Y 4,000 mm/min, rapid traverse Z 2,000 mm/min, rotary table feed up to 4 rpm, main drive 20 kW, tool holder SK 50, programmable milling head, swivel time horizontal/vertical 6 sec, NC rotary table, spindle speed stepless up to 2,500 rpm, spur gearing, milling head swivels +/- 90°, quill manual 115 mm, quill motorized 100 mm, electronic handwheel, connected load 35 kW, milling spindle bearings replaced in 2025. Tedoyx Un Tepfx Aired

Condition: used, Year of construction: 1974, Technical details: total power requirement: 1,65 kW weight of the machine approx.: 620 kg Saw Blade Sharpening Machine Machine not complete - grinding spindle motor missing! Todjwqplkepfx Airsd for sale as spare part dispenser! *

Condition: good (used), Year of construction: 1990, 1 used, well-maintained CNC tool milling machine, traveling column design, with CNC path control GRUNDIG Dialog 11 Table size 1600 x 675 mm Tool holder SK / ISO 40 Travel distances X-axis, longitudinal 1200 mm Tjdpjhhuf Hofx Aired Y-axis, transverse 600 mm Z-axis, vertical 500 mm Table load 2000 kg Spindle speed range 20 – 6300 rpm Feed rate range, stepless 2 – 10,000 mm/min Rapid traverse in all axes 10 m/min Quill stroke 80 mm Drive power 100% ED 7.5 kW 40% ED 12 kW Machine dimensions L x W x H 3600 x 3000 x 2300 mm Machine weight 6800 kg Control cabinet dimensions L x W x H 1700 x 900 x 1750 mm Control cabinet weight 470 kg Accessories / Special features: • CNC tool milling machine suitable for tool and fixture manufacturing, training, and mold making • CNC path control GRUNDIG Dialog 11 • Screen graphics, dialog-guided input, 3D linear interpolation, circular interpolation, helical interpolation, polar coordinate input, numerous drilling and milling cycles, cycle input graphically supported, milling cycles "contour pocket" for automatic free milling of irregular pockets, even with islands, shifting and rotation of the coordinate system • Electronic handwheel • RS 232 interface • Swiveling vertical milling head +/- 90° • Hydraulic tool clamping, DIN 2080 with clamping groove, Ott system • Quill adjustment 80 mm • Horizontal milling attachment • Full protection enclosure • Ball screw spindles in all 3 axes • Coolant system • Lighting Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: used, Year of construction: 2018, x-travel 620 mm y-travel 350 mm z-travel 400 mm table surface area 820 x 420 mm Maximum weight on the table 300 kg milling head -swivable +/- 90 ° Speed range - 2 levels 0 - 4.500 U/min feed speeds 0 - 2.000 mm/min rapid traverse 5.000 m/min total power requirement 7 kW weight of the machine ca. 1,65 t Tsdpfx Aijz St Nrjred dimensions of the machine ca. 2,25 x 1,9 x 2 m

Condition: excellent (used), Year of construction: 2005, Description to follow! Todpfxe Afztdj Aired

Condition: excellent (used), Year of construction: 2010, operating hours: 25,540 h, 1 used 5-axis machining center DECKEL MAHO DMU 50 with SIEMENS control Siegfried Volz Werkzeugmaschinen Tjdpfx Aij Afbv Sersd Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: good (used), Year of construction: 2001, functionality: fully functional, FMB MBZ 75 - 80, 5-axis FMB multi-machining center, Type MBZ - 2 / 72-80 / 5, Year of manufacture 2001, PC control with TFT color display, Travel range X/Y/Z 7000/1000/370 mm, Milling head with high-frequency spindle for aluminum, Spindle speed up to 18,000 rpm - 7.5 KW, Tool changer, 12-position, Tool holder HSK 40, 2-axis NC dovetail milling head, 8 pneumatic clamping elements, Swivel machining possible, Program generator, FMB programming software, Pneumatic material stop, Measuring / probing device. Tjdezhuitopfx Airsd