Used Universal Vertical Milling Machine for sale (67,195)

Condition: used, Year of construction: 2008, x-travel 600 mm y-travel 450 mm z-travel 300 mm Dcodpex Iwg Dsfx Al Aek spindle tunring speed 42.000 U/min In our opinion, the machine is in good used condition and can be inspected under power by appointment. Equipment: - Extraction system, Keller - Pallet system, Röders RC 2 Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: ready for operation (used), Year of construction: 1969, x-travel 700 / 710 mm y-travel 275 mm z-travel 350 mm taper in main spindle ISA 40 table surface area 900 x 250 mm T-slots 3 x 18 x 60 Stk. turning speeds 32.0 - 2000 U/min feed stepless 15 - 750 mm/min voltage 400 V total power requirement 4.0 kW weight of the machine ca. 1400 kg range L-W-H 1000 x 1400 x 1800 mm Dedpfjzkbnzjx Al Aock from a training workshop (vocational school) Features: - Robust, electric-motor-driven universal milling machine - With horizontal and vertical main spindles * Vertical main spindle can be swiveled 360° in two planes - Sturdy T-slot clamping table with 18 mm T-slots - Electric feed control - Stepless speed adjustment - Swiveling machine light - Control cabinet, installed on the right - Original operating instructions Machine data sheet

Condition: used, x-travel 775 mm y-travel 250 mm z-travel 425 mm table-size 1100 x 240 mm control konventionell tool adaptor SK40 turning speed range 40 - 1250 U/min total power requirement 2,2 kW weight of the machine ca. 1,2 t dimensions 1,4 x 21, x 2,0 m Dcodpfxezpzccj Al Aok Equipment: - Heidenhain digital readout - Coolant system - Adjustable chip guard

Condition: used, Year of construction: 2009, machine/vehicle number: A0908/7866, working width: 250 mm, KOCH SBD-B Saw-Mill-Drill - Pass-Through Machine The machine has the following functions - loading magazine Dedpfx Alowd Rlfo Ajck - 2 units with a formatting saw diameter 400/30 mm - 4 milling units with oscillation 4KW 18,000 rpm adjustable pneumatic oscillation - 2 horizontal drilling supports head 7 spindles (2 in the 32 mm module, 5 in the 16 mm module) - 3 vertical drilling supports head 14 spindles (12 in the 32 mm module + 2 extreme angular in the 32 mm module - 3 horizontal drilling supports Y axis 2 heads 16 spindles (14 spindles in the 32 mm module + 2 angular in the 32 mm module + 1 head 8 spindle (7 in the 32 mm module + 1 middle angle 32 mm - Return belt to the operator - Supports for long elements The machine does not have doweling units Dimensions of processed elements L- 350-2500 W- 30-200 Gr- 15-75 Machine configured for processing table elements, sample elements in the attachment

Condition: used, Univ. universal milling machine with active digital display, DECKEL type FP 1 Universal milling machine Machine No. 2102 - 6130 Year of manufacture 1991 Travel distances X: 300 mm, Y: 150 mm, Z: 330 mm Dcedjzinzxepfx Al Aok Table size 600 x 210 mm Spindle mounting SK 40 - S20x2 Spindle speed 40-2000 rpm, 16 steps Feed rate 5 to 500 mm/min Rapid traverse 1200 mm/min Motor power 1.6 and 2 kW, pole-changing Mains connection 380 Volt, 50 Hz - Active digital display for 3 axes, HEIDENHAIN type TNC 113 - Stepless feed in the X, Y and Z axes - Spindle speed controlled via 2 motor speeds and 8 gear stages - Quill travel on the vertical milling head 60 mm - Vertical milling head swiveling and horizontally extendable 100 mm - Fixed tilting table 600 x 210 mm - Coolant system in the machine base - Central lubrication - Adjacent control cabinet - Protective enclosure with hinged doors around the machine table - Original chip tray for mounting on the machine base - Machine lamp - Counter holder with counter bearing - Electrical diagram available Space requirement L x W x H 1600 x 1250 x 1750 mm Weight 900 kg Good condition

Condition: used, Univ. universal milling machine with active digital display, DECKEL Type FP 1 Machine No. 2101 - 7088, Year of manufacture 1993 Travel distances X: 300 mm, Y: 150 mm, Z: 330 mm Table size 600 x 200 mm Spindle mounting SK 40 - S20x2 Spindle speed 40-2000 rpm, 16 steps Feed rate X and Y axis 5 to 500 mm/min. Rapid traverse 1200 mm/min. Motor power 1.6 and 2 kW, pole-changing Power connection 380 Volt, 50 Hz - Active control and digital display for 3 axes, HEIDENHAIN Type TNC 123 - Stepless feed rate via servo motor in the X, Y, and Z axes - Spindle speed via 2 motor speeds and 8 gear stages Dodpfxjziny Is Al Ajck - Quill travel on the vertical milling head 60 mm - Vertical milling head swiveling and horizontally extendable by 100 mm - Swivel, rotary, and tilting angle table DECKEL, Type 2114 - Coolant system in the machine base - Central lubrication - Adjacent control cabinet - Hinged protective shield with safety switch - Original chip tray for mounting on the machine base - Electrical diagram available Space requirement L x W x H 1600 x 1200 x 1770 mm Weight 900 kg Good condition

Condition: used, x-travel 300 mm y-travel 160 mm z-travel 330 mm table surface area 600 x 200 mm table load capacity 200 kg Spindle Speed 40-2.000 U/min. tool taper SK40 Djdpjy Sbkbjfx Al Aeck dimensions 1200 x 1160 x 1800 mm machine weight ab. 800 kg

Condition: used, Year of construction: 1987, x-travel 720 mm y-travel 220 mm z-travel 450 mm Dcjdsyv N Hxspfx Al Ajk table surface area 1000x310 mm weight of the machine ca. 1.500 kg dimensions of the machine ca. 2000x1200x1800 mm

Condition: used, Year of construction: 2018, Technical details: x-travel: 3500 mm y-travel: 1300 mm z-travel: 1600 mm table-size: 3860 x 1200 mm mm turning speeds: 4.000 1/min max. torque on the spindle: 900 Nm Djdpfjzipkbjx Al Aock tool change unit: 40 taper ISO: 50 rapid traverse: 35 m/min milling spindle drive: 43 kW control: TNC 640 HEIDENHAIN weight of the machine ca.: 24 t Universal- CNC-bed-milling machine with toolchanger, • H200 universal milling head 2,5° x 2,5 ° • 40-ATC • 5-axis-interpolation • DCM collission control • Interpolation turning • M&H 3D-touchprobe • ICS 20 bar • paper filter + magnetic separator • cabin • 3 chipconveyor accessories: toolholder (approx. 40 pcs.) approx. 12.000 h "machine on", approx 5.000h "spindle on", still under power in closed factory *

Condition: used, Year of construction: 1985, x-travel 710 mm y-travel 500 mm z-travel 460 mm table surface area 1000 x 500 mm spindle taper SK 40 control HEIDENHAIN TNC 155 spindle turning speed range 31,5 - 3150 U/min feeds longditudinal/cross/vertical 1 - 3000 mm/min rapid traverse longitudinal and cross 6 m/min rapid traverse vertical 4 m/min quill stroke 110 mm distance spindle nose and table max. 559 mm table load capacity max. 500 kg total power requirement 14 kW weight of the machine ca. 3,3 t dimensions of machine L x W x H 2,20 x 2,30 x 2,15 m Dcodpfxjzip His Al Aok Accessories: vertical head with hydr. tool clamping and quill retraction, solid table, electron. handwheel, coolant

Condition: excellent (used), Year of construction: 2003, Tool holder, vertical + horizontal SK 40 Table size, L x W 710 x 315 mm Speed range, vertical spindle 63 – 2500 rpm Speed range, horizontal spindle 45 – 1800 rpm Dcedpfxsziutzj Al Ask Travel ranges: X-axis, longitudinal adjustment, automatic / manual 400 / 420 mm Y-axis, transverse adjustment, automatic / manual 220 / 228 mm + cross slide 375 mm Z-axis, vertical adjustment, automatic / manual 350 / 380 mm Adjustment of the quill, vertical, manual 80 mm Machine dimensions, approx. 1550 x 1620 x 1850 mm Machine weight, approx. 1300 kg Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, Year of construction: 2012, x-travel 800 mm y-travel 800 mm z-travel 600 mm Control Heidenhain iTNC 530 spindle tunring speed 30 - 8.000 U/min spindle drive 25 kW torque 244 Nm tool taper SK 40 number of tool places 30+190 Pos. A-axis ° Dcjdpfjyzt Dljx Al Aek C-Axis 360 ° table surface area 800 x 630 mm table load 600 kg rapid traverse ( x / y / z ) 40 m/min auto power on hours ca. 79.968 h spindle hours ca. 800 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. The spindle has been overhauled. Technical Features & Accessories: - Additional magazine - Chip conveyor - Infinitely variable speed control - 5-axis simultaneous machining - 70 bar internal coolant supply - Flushing nozzle - Workpiece measuring probe - Blum laser tool control - Heidenhain 410 electronic handwheel Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: new, Year of construction: 2022, CNC Vertical Machining Center VOC-1000 BASIC TECHNICAL DATA: - Travels in X/Y/Z axes: 1040 / 580 / 620 mm - Spindle speed 12,000 rpm; BT-40 - Work table 1120x560 mm; load capacity 750 kg - Distance from spindle center to table 125-745 mm Dodsiwtnaspfx Al Ajck - Distance between spindle axis and column 666 mm - Working feed rates up to 10 m/min - Rapid traverse rates 36/36/30 m/min - Positioning accuracy +-0.008 mm; repeatability +-0.005 mm - Machine dimensions (W x D x H) 2671 x 2800 x 2760 mm - Machine weight 7000 kg STANDARD MACHINE EQUIPMENT: - FANUC 0I-MF Plus control system (5); 10.4˝ LCD display - Spindle motor Fanuc Beta 11/15 kW - Servo motors for axes Fanuc Beta 1.8/1.8/3.0 kW - AICC program pre-reading of 40 blocks - MPG handwheel - Spindle oil cooler - Air blow gun and emulsion flushing gun - Chip conveyor (screw type) with container - 24-position tool magazine A.T.C - PMI ball screws and linear guides on all axes - Through-spindle coolant for tool changing - Chip flushing system - Heat exchanger for electrical cabinet - Automatic lubrication system - Signal light & work LED lamp - Fully enclosed work area with cabin - Tool kit - Leveling screws and pads - CE standards ADDITIONAL MACHINE EQUIPMENT: - Through-spindle coolant at 20 bar with additional 600l tank (5,000 EUR + VAT)

Condition: used, Year of construction: 2012, x-travel 1600 mm Dcodpsyyqgujfx Al Ajk y-travel 710 mm z-travel 700 mm Control HEIDENHAIN, TNC 124 table surface area 2200 x 550 mm spindle taper SK 50 DIN 69871 spindle turning speed - stepless 40 - 1600 U/min spindle drive 11 kW feed X/Y/Z-axis 2000/2000/1000 mm/min. rapid traverse X/Y/Z axis 5000/5000/2500 mm/min feed motor 3 kW distance table / vertical spindle 50 - 750 mm distance table/horizontal spindle 60 - 760 mm table load max. 3000 kg total power requirement 15 kW weight of the machine ca. 8 t dimensions of machine L x W x H 3,15 x 2,75 x 2,70 m Accessories: Univ.-milling head with hydr. tool clamping, electron. handwheel, table housing, coolant

Condition: excellent (used), Year of construction: 2008, x-travel 800 mm y-travel 400 mm z-travel 500 mm Control Siemens table surface area 1270 x 320 mm spindle turning speed - stepless 0 - 6000 U/min distance spindle /table 100 - 600 mm Dedpfxsymqwxe Al Aock throat 510 mm tool taper SK 40 weight of the machine ca. 2,7 t dimensions of the machine ca. 2,2 x 2,0 x 2,5 m

Condition: reconditioned (used), functionality: fully functional, The Aciera F3 is a compact, precision bench milling machine renowned for its robust construction and excellent surface finish. Widely used in toolrooms and prototyping workshops, it provides precise control for machining small to medium-sized parts. Dcjdpeznh Ehsfx Al Ajk

Condition: excellent (used), Year of construction: 2007, CNC control: Heidenhain TNC 124 Travel ranges: X-axis travel: 620 mm Y-axis travel: 420 mm Z-axis travel: 400 mm Dcjdjzh Effjpfx Al Ajk Main spindle speed range: 50 - 4000 rpm Gear stages: 2 Main spindle drive power: 6 kW Tool holder: ISO 40 Clamping force: 10 kN Spindle head: manually swiveling ±45° Max. tool diameter: 125 mm Max. tool weight: 6 kg Table clamping surface: 400 x 800 mm T-slots: 5 x 14 x 80 mm Max. table load: 400 kg Feed rate X / Y: 0 – 6000 mm/min Feed rate Z: 0 – 4000 mm/min Rapid traverse X / Y: 6000 mm/min Rapid traverse Z: 4000 mm/min Total connected load: 10 kW Footprint L x W x H: 2850 x 3350 x 2000 mm Machine weight: 2100 kg

Condition: used, machine/vehicle number: 2810 - 4271, x-travel:500 mm y-travel:400 mm z-travel:450 (390) mm surface of table:710 x 430 mm spindle speed max.:40 - 4000 U/min feed range:10-2000 mm/min rapid traverse:4,0 m/min spindle drive motor:4,0 kW tool taper:SK40 control:CNC Contour 3 power capacity:9 kW weight of the machine ca.:2 t dimensions of the machine ca.:2,4 x 2,3 x 2,3 m Deckel FP4 NC Machine for Medium - Heavy range use. - Spindle Head can be swiveled 90° (left or right) - Universal Work Table ( 710 x 430 mm ) - Hydralic Tool clamping system SK40 with Pull studs DIN 2080 or DIN 69872. - Deckel Contour 3 CNC control Systems. - Portable Electronic handwheel and Handheld operating unit for easy Setting and control. - Powerful 2.2 kw Siemens Axis Servo motors and 4.0 kw Motor for Main Spindle. Djdpfx Alsh Ra Izj Aeck The machine has Central Lubricant system, Seperate Power cabinet, Enclosed Chip tray and Splash cabin

Condition: used, Year of construction: 1998, x-travel 0500 mm y-travel 400 mm Dodezhxi Djpfx Al Aeck z-travel 400 mm table surface area 700 x 500 mm tool taper 40 SK/ISO spindle turning speed range 20- 4500 U/min feeds 5000 mm/min spindle motor 12 kW total power requirement 13 kW weight of the machine ca. 2,8 t dimensions of the machine ca. 3 x 2 x 2 m Table could be rotated and swiveled manually with digital readout in C- and B- axe over control panel. Control: Heidenhain TNC 124.

Condition: used, Universal Milling Machine MAHO MH 800 Travel X: 700 mm Travel Y: 450 mm Travel Z: 450 mm Spindle SA 40 Spindle exit : 125 mm Spindle speed: from 32 to 1600 RPM Table size: Length 1050 mm x Width 620 mm Manual table travel: 225 mm Table rotation at 360° Swivel table at +/- 30° Scale 3 axes ACU-RITE Sensory drilling Djdpfx Aezm Sqfsl Ajck Feeds spindle not working Clutch speed used Lubricant pump Voltage: 380 V Width: 2000 mm Depth: 2100 mm Height: 2500 mm Weight: 3 T

Condition: used, Year of construction: 1989, Universal CNC Milling Machine MAHO MH 600 E2 Travel X: 600 mm Travel Y: 400 mm Travel Z: 450 mm Numerical Command CNC PHILIPS 432 Cone SA40 Spindle speed: from 20 to 4000 RPM Table size: 900 x 480 mm TravelSpindle sleeve travel: 80 mm Year of construction: 1989 1 lubricant tank Voltage: 380 V Width: 2500 mm Depth: 2400 mm Dedpfx Aszm Sp Ujl Aock Total height: 2000 mm Weight: approx 3,5 T

Condition: used, Year of construction: 1987, Universal CNC Milling Machine CNC MAHO MH 400 E Travel X: 400 mm Travel Y: 375 mm Travel Z: 250 mm Numerical Command CNC PHILIPS 432 Djdezm Spzjpfx Al Aock Table: 700 x 270 mm Cone: SA40 Spindle speed: from 80 to 4000 RPM Year of construction: 1987 Central lubrication Manually swivel head Supplied with doc + machine parameters Voltage: 380 V Width: 2200 mm Depth: 2000 mm Total height: 2000 mm Weight: approx 1,5 T

Condition: good (used), functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, Heidenhain TNC 310 cnc control C and B-axis manual with display swivel rotary table electronical hand wheel coolant device Technische Daten: Dodpoy E Iztofx Al Aock Längsweg (X-Achse) / X-travel longitudinal 500 mm Querweg (Y-Achse) / Y-travel cross 400 mm Senkrechtweg (Z-Achse) / Z-travel vertical 400 mm Werkzeugaufnahme / spindle taper SK40 Drehzahlbereich / spindle speed range 20-4500 UpM Vorschub / feed 5000 mm/min. Gewicht ca. / weight ca. 2800 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: used, Year of construction: 2017, x-travel 800 mm y-travel 500 mm z-travel 600 mm control Fanuc Series Oi-MF spindle tunring speed 15.000 U/min table-size 800x560 mm gleichmäßig verteilt bis zu 600 kg tool taper SK40 tool changer: 32-fach output 35 KVA Number of working hours ca. 19.960 h weight of the machine ca. ca.11t + Wechsler ca.8t In our assessment, the machine is in good used condition and can be inspected under power by appointment. Robust vertical moving-column machining center with a fixed table, designed for precision and stability when machining heavy workpieces. Technical features & accessories: - Tool changer - Through-spindle coolant (TSC) - Swiveling pallet changer / 2-pallet machining system - Coolant system Dsdpfszgxggjx Al Asck - Chip conveyor Accessories, tools, and work-holding devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data/specifications, and prior sale.

Condition: used, Year of construction: 2015, x-travel 1200 mm y-travel 600 mm z-travel 600 mm control Dahlih-FANUC Solution C spindle tunring speed 15.000 U/min tool changer: 40-fach tool taper SK40 table-size 1.300 x 640 mm output 35 KVA Number of working hours ca. 18.263 h weight of the machine ca. ca. 7.500 kg In our assessment, the machine is in good used condition and can be inspected under power by appointment. A robust vertical CNC machining center designed for the precision machining of steel, cast iron, and molds. It is characterized by high rigidity and flexibility. Djdpfx Aezgxgasl Asck Technical features & accessories: - Lehmann 4th axis with tilting bridge and grid clamping table / tilting rotary table - 2x machine vises - Handwheel - Tool changer - Through-spindle coolant (TSC) - Coolant system - Chip conveyor Accessories, tools, and workholding devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale.