Used Unscrambler for sale (40)

Condition: like new (used), Year of construction: 2004, COMPLETE PET BOTTLING LINE | 13,000 BPH Speed: 13,000 BPH at 0.5L 12,000 BPH at 1.5L Working hours: approximately 2,500 per year Blower SIPA 2004 Model: SFR12 Number of cavities: 12 Preform tipper. Air recovery Compressor NOT PRESENT Chiller NOT PRESENT Piping NOT PRESENT Included formats: 0.5 L – 1.5 L – 2 L – 0.66 L Air conveyor LANFRANCHI 2002 Saturator ALCIAMPIANTI 2006 Ozone generator PROCOMAC 1997 Filling monoblock PROCOMAC 1997 Rinser with 36 clamps Model: GRIPSTAR Isobaric filler, 48 valves Model: FILLSTAR PET 48.12 Functions: Sanitization De-gassing Capper AROL 12 heads – 2018 Model: TS EURO PK Cap types: Alaska Sport cap Hopper, elevator and unscrambler included Bottle inspector OMRON 2008 Level control Cap presence check Expulsion in case of defects Labeller P.E. 1997 Model: FUTURA 15T Number of heads: 15 Label type: wraparound Type of glue: glue Gluing system Nordson 2010 Conveyor belts PROCOMAC 1997 Shrink wrapper SMI 1997 Model: APET 143/D Type: film launch Packable formats: 3x2 Lsdpfjtqfg Hex Aaaohp 4x3 6x4 Handler SMI 1997 Model: MAB 60 Number of lines: single Double reel magazine Palletizer TMG 1997 Model: SIRIO 2S1C Type: push system Interlayer system Pallet storage Pallet wrapper TOSA 1997 Model: 121 Type: rotating arm Functions: Pre-stretch Top sheet application Machinery has been serviced regularly, about once per year Last maintenance: April 2024

Condition: new, Year of construction: 2025, Samples System to fill small bottles with small volume of liquid: Typical use is filling of eye drops. The system includes an container unscrambler, which sets the small bottles into an infeed line. Module to clean the bottles (water/gas) and inside/outside tucks (cap parts), filling and labelling the bottles. The system is PLC controlled. The total 3 cleaning processes with water plus the 3 cleaning processes with gas assures a very high cleaning standard without any water remaining. All liquid touching parts are made of stainless steel SS316 completely. - Specifications: Filling precision: < +/- 0.5%; max. speed of the machine in neutral: 120 bottles/minute; filling capacity: 5-30ml; 380V, 3.8kW; 6bar. All these specifications only are sample specifications. Depending on the final working process they will vary. - Please give us your detailed inquiry (container shape and size, speed , product to fill, working steps) to give you a full quotation. Lodpfx Aasv Nlbtoaohp That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: ready for operation (used), Year of construction: 2019, A complete can erecting, counting and seaming system including labeling and cartoning is available. 1) Can unscrambler IMA Swiftpack UN 800S, year of manufacture: 2007, unscrambling capacity: 60 cans/min, formats diameter/height: 45mm/51.5mm, 45mm/84mm, 45mm/96mm, 60mm/80mm, 60mm/122mm. 2) Counting machine Cremer CF 1220, year of construction: 2002, counting capacity: 1000 products/min, counting heads: 1, channels: 12, formats: Capsules (HGK & WGK) and tablets (round & oblong), including one cylinder for storage flaps as spare part. 3) 2x rotary plate Höflinger & Karg S1, plate diameter: 1000mm. 4) CBV Servo lid closing machine (screw capper), year of manufacture: 2019, closing capacity: 40 closing operations/min, lid diameter range: 23mm-100mm. 5) Rudolf Deckert AVM 738 can seamer (crimper), year of manufacture: 2003, seaming capacity: 50 cans/min, can diameter: 45mm/60mm, lid formats diameter/height: 42.4mm/17.15mm, 50mm/12mm. 6) Can and bottle labeler IMA Sensitive 350, year of construction: 2009, labeling capacity: 350 labels/min, can and bottle diameter range: 15mm-78mm, max. product height: 220mm, label length range: 15mm-220mm, label height range: 10mm-140mm, equipped with hot stamping Allen Coding Set S-Compact 50/30 and camera Keyence IV 500 CA. 7) Can and bottle cartoner Uhlmann C100, year of construction: 1988, cartoning capacity: 70 cans/min, max. Can/bottle diameter and height: 60mm/120mm, folding carton length range: 30mm-113mm, folding carton width range: 15mm-85mm, folding carton height range: 70mm-130mm, the machine was converted to cans and bottles in 2017 and equipped with a Mitsubishi D700-SC control system, including GUK Cartonac 91 folder, 3x code reader and luminescence control. 8) Wipotec TQS-HC-A coding and inspection device for serialization, temper evident and weighing, year of manufacture: 2017, inspection capacity: 300 products/min, including 2x Herma 400 label dispenser, dual print head (2 cartridges), camera for print inspection, load cell with weighing belt and hand scanner. 9) Christ FilmTeq 3030 banding machine, year of manufacture: 2011, infeed capacity: 50-200 folding boxes/min, outfeed capacity: 7-50 packs/min, folding box length range: 15mm-400mm, folding box width range: 15mm-90mm, folding box height range: 60mm-150mm, bundle length range: 60mm-400mm, bundle width range: 60mm-150mm, bundle height range: 30mm-230mm. Documentation available. On-site inspection is possible. Ljdpfswa Tixjx Aaajhp

Condition: used, Year of construction: 2015, Overview The machine built in 2015 by Lithuanian manufacturer FlexBlow. The machine has been overhauled and new dumper, hopper and unscrambler will be built. The machine is already disassembled. Please note that the picture of the advertisement is for reference only.  Techn. Details  Capacity: 5.500 bph (at 1,0l)  Number of cavities: 4  Max. bottle neck: 48 mm Max. bottle size: 2,0l  Previously used neck size: 38 mm  Spare parts, blow molds and new set of neck specific parts can be purchased additionally Siemens controller and English operational language Lhedpfx Ael Hx H Esaasp

Condition: ready for operation (used), Packing and stacking machine for sawn wood. Roller conveyor system to handle the ready made packages are also included in the delivery. The unit can be feeded with a belt conveyor also included Lhjdpek T Aqwofx Aaaop or unscrambler ( not included )

Condition: like new (used), Year of construction: 2021, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, total width: 7,000 mm, total length: 27,000 mm, total height: 2,500 mm, compressed air connection: 6 bar, filling weight (min.): 200 g, filling weight (max.): 2,500 g, pressure: 6 bar, Complete Filling Line for Liquid Soaps. We are installing a new type of filling machine, which is why we are now selling our largest unit. The machine operates flawlessly and is fully functional. It has been in continuous production and is well-maintained. Ideal for high-volume liquid filling, this machine represents a reliable and cost-effective solution for businesses looking to scale up their operations. This is a fully integrated, high-capacity filling line designed for the efficient and precise handling of liquid soaps and similar viscous or semi-viscous products. The line includes all necessary components for a seamless production process—from product feeding to final palletizing. The machine includes the following. It is possible to buy from 7-11 the packing part. ask for price. 1.Automatic Bottle Unscrambler 2. Automatic Flow Meter Filling Machine, 14 nozzles 4. Anticorrosive Pneumatic Diaphragm Pump 5. Automatic Spindle Capping Machine Lhsdpfx Aewladteaasp 6. Two Sides Stick Labeling Machine 7. Automatic carton forming machine 8. Automatic packing machine 9. Automatic folding and sealing machine 10. Automatic Servo Palletizer System 11. Conveyor lines 12. a lot of spare parts.

Condition: used, Year of construction: 2004, Bottling Blower, PET Blowing Machine KRONES Lhsdpfjwuyt Tjx Aaajp Including (preform tipper, preform hopper, preform unscrambler, chiller, air conveyors for bottle transport, year 2004) Model: Contiform S8 Year: 2004 Speed: 13,600 BPH Number of cavities: 8 Machine dimensions: Carousel 2000 mm x 2000 mm x 3000 mm (h) Oven 4000 mm x 2000 mm x 3000 mm Safety protections

Condition: new, Year of construction: 2025, Sample system for filling liquids into bottles, closing them with a twist-off cap and then bottles labelling. Complete system consisting of: Bottle unscrambler; Filling machine with 4 filling heads for liquids with high or low viscosity; Lid closing machine for different sizes and shapes of lids including lid unscrambler; Labelling machine for bottles/cans/containers made of glass or plastic; Collecting table. The individual machines of the packaging line are connected to each other via conveyor belts, which gives the installation of the line high flexibility. -Specifications: Number of filling nozzles: 4; filling range: 100-1000ml; dosing method: by piston pump; accuracy: +/- 1%; bottle height: 15-400mm; bottle diameter: 25-200mm; speed: max. 1000 bottles/hour; label size: L25-300mm, W20-180mm, product contact parts are made from 304 stainless steel. Dimensions and total weight of the line depend on the actual layout. Please note: This is only an example system. Final specifications may vary. The machine photo just shows the 4-head filling machine. Lsdpfx Aasv Nlbajajhp Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: used, Year of construction: 1999, - PET-Blow moulding machine, make Sidel, type: SBO 16 with preform tipper, preform feed, unscrambler, preform transport, built 1999, already dismantled, ex location for sale. - PET-Blow moulding machine, make Sidel, type: SBO 20, with preform tipper, preform feed, unscrambler, preform transport, built 1999, already dismantled, ex location for sale. Lhedpforazwrsx Aaaep

Condition: used, Year of construction: 2021, Overview  The bottle unscrambler was manufactured in 2021 by the German company ALWID. It is part of a new filling line and can fill chemical products into plastic containers. The machine has ATEX certification, which allows it to handle explosive products. The machine can be purchased with warranty.  Technical data  Capacity  12.000 bph at 50 ml HDPE, oval 43 x 23 x 95 mm  14.000 bph at 250 ml HDPE, Ø60 mm x 126 mm Incl. 2 format sets for processing the above mentioned bottle sizes. Bottle sizes Fully enclosed cabin, machine frame and wall panels in stainless steel Floor frame in mild steel, painted (similar to RAL 9006 silver gray) Quick access due to large doors as well as quickly removable panels Rejection of defective bottles  Easy format changeover due to quick-change system without tools Siemens S7 control system  Bottle loading system with hopper 1000 l, in stainless steel, chassis and supports in mild steel, painted Positronic control system for optimum adaptation to downstream filler Lhodpfx Aaemk I Dwsasp

Condition: used, Year of construction: 2018, Speed: 5,300 bph – 500 ml PET Kosme Preform Tilter – year 2018 Kosme Preform Elevator – year 2018 Kosme Preform Unscrambler – year 2018 Kosme Blower – year 2018 ATS Chiller Air Belts Mixer – year 2016 Kosme Filler – year 2017 Lhodpfxov Sb N Ej Aaasp AVE Capping Machine – year 1999 Kosme Labeler – year 2018 Belts SMI Shrink Wrapper – year 2001 SMI Tunnel Suitable for 6 / 12 / 24 packs Videojet Date Coder Logopak Carton Labeler – year 2012 Code: NP 668

Condition: new, Year of construction: 2025, Sample filling system for low viscosity products (ketchup, jam, sauces, etc.) into bottles, glasses, cans. Including container unscrambler, rolling bottle/container rinser, viscosity filler (hot filling, steam filling), vacuumize jar capper. - Specifications: filling volume 20-1000ml; bottle size range: diameter 20-150mm, cap diameter: 20-70mm; 4-12 filling nozzles allowing speed s of up to 6000 bottles/containers per hour; tolerance of filling quantity: +/- 1%; yield of capping: < 99%; 380V, 3.5kW, 0.6m³, 6bar. - Please note: These are specifications for a sample system only. The final specifications will vary. Please give us your packaging details (container size, shape, filling product, required speed , etc.) to prepare a full quotation for you. Lsdpfxev Nlbmj Aaajhp Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: used, Year of construction: 1999, Overview This SIDEL blow moulder and KHS filling monobloc were both manufactured in 1999. They are still in production until the end of October and can be viewed in person. The special feature of the filler is that it can process carbonated or still mineral water with natural flavors using a micro-dosing unit. The filler (KHS Innofill monobloc) and accumulation table (Sidel AQ) are also available without the blow molder (Sidel SBO 18 Series 2), price on request.  Technical Details Blow moulder | SIDEL | SBO 18 Series 2 | 1999 Current capacity: 23.400 bph in 1.25L Working hours: 40.000            Number of moulds: 18      Moulds type: Shell type quick change Formats produced: 1.25L Bottles: Cylindrical petaloid base Oven type: Sidel Neck personalization: PCO 1881  Type of preforms: with recycled PET resin Machine was regularly maintained     Machine equipped with:            Sidel preform tipper Sidel hopper with cover & feeder Sidel preforms unscrambler Sidel preforms infeed rail Blowing station for 18 moulds Sidel electrical cabinet with Siemens Sidel PCC drive & control Lanfranchi bottles buffer storage silo            Unscrambler and air conveyor system with drive to the entry KHS monobloc Supplied with all format & spare parts available Rinser, Isobarometric Filler, Capper Monobloc | KHS, Zalkin | VK-E 40/50/10/S PET | 1999 (low working hours) Filling carbonated mineral water and also carbonated mineral water with natural flavours Processing: PET bottles 1,25L & 0.50L cylindrical petaloid base Bottle neck: PCO28 1881 Current capacity: 23.400 bph Number of rinsing nozzles (KHS Innoclean): 40 Number of filling valves (KHS Innofill): 50 Number of capping stations (Zalkin): 16 Including also micro-dosing unit Perrier for natural flavours With caps magazine & elevator Accumulation table Gebo Sidel type AQ file Dynamic accumulation and buffer between the filler outlet and the labeller inlet, avoids untimely stops upstream (filler, blow-moulder) due to the labeller Ljdpfxorqar Sj Aaashp

Condition: new, Year of construction: 2025, Samples System to fill small bottles with small volume of liquid: Typical use is filling of eye drops, nail polish and other. Infeed by infeed line; possibly from an sorting system upstream (which is not included in this system). The system includes a container unscrambler, which sets the small bottles after the filling into an outfeed line. The system is PLC controlled. - Specifications: max. speed of the machine in neutral: 50 bottles/Minute; filling capacity: 20-60ml; 1.75kW; 6-8bar. All theses specifications are just examples. The final system will be custom-built. - Please give us your detailed inquiry (container shape and size, speed , product to fill, working steps) to give you a full quotation. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Ljdsv Nlbyjpfx Aaajhp

Condition: used, Year of construction: 1998, Overview This machine was built in 1998 by French manufacturer Sidel. The machine is in very good working condition, is already professionally dismantled and stored in a warehouse. Techn. Details Capacity: 7.200 bph in 1,5L Number of moulds:  6 (molds not included) Equipped with quick change for shell molds Number of heating modules: 10 modules Neck personalization: 29/25      Working hours: 47.000 only         Machine was regularily maintained       Machine equipped with:            Sidel preforms elevator to unscrambler Sidel preforms unscrambler & feeder Sidel oven & blowing wheel for 6 molds Sidel electrical cabinet Sidel PCC drive & control panel Big set of spare parts list upon request Lhsdpfxerkgy Uj Aaaep