Used Upcut Saw for sale (5,793)

Condition: new, cutting diameter 250 mm capacity 90 degrees: flat 280 x 220 mm capacity 90 degrees: square 220 x 220 mm capacity 45 degrees: round 230 mm capacity 45 degrees: flat 220 x 200 mm capacity 45 degrees: square 200 x 200 mm capacity 60 degrees: flat 140 x 100 mm capacity 60 degrees: square 100 x 100 mm capacity 60 degrees: round 110 mm vice 285 mm turning speed range: 36/72 m/min saw band length 2.950 x 27 x 0,9 mm total power requirement 1,5/1,8 kW Hjdpfx Aboxaarks Ient weight of the machine ca. 440 kg. dimensions of the machine ca. 1620 x 1360 mm Equipment: - robust electro-hydraulic band saw (INDUSTRY) - large bearing-mounted rotary table * for miter cuts from 45° right to 60° left - automatic saw bow lowering * with continuously adjustable feed * limit switch at the end of the cut - manual cutting function selectable - saw band guide made of hard metal plates - 1x saw band - 1x angle stop - moving chip removal brush - control panel - front right - hydraulic pressure box for saw band tension * with analogue pressure display (manometer) - machine base frame with forklift pockets - coolant system - operating instructions in German

Condition: new, cutting diameter 250 mm capacity 90 degrees: flat 280 x 220 mm capacity 90 degrees: square 220 x 220 mm capacity 45 degrees: flat 220 x 200 mm capacity 45 degrees: round 230 mm capacity 45 degrees: square 200 x 200 mm capacity 60 degrees: flat 140 x 100 mm capacity 60 degrees: square 100 x 100 mm Hnsdpfxjxaatbj Ab Iot capacity 60 degrees: round 150 mm vice 285 mm turning speed range: 36/72 m/min dimensions of saw-band 2950x27x0,9 mm total power requirement 1,5 / 1,8 kW weight of the machine ca. 460 kg dimensions of the machine ca. 1150 x 1970 mm Equipment: - robust electro-hydraulic semi-automatic band saw machine (INDUSTRY) - with miter cuts from 45° right to 60° left * Miter adjustment via large turntable - MEP microprocessor control EVO to control all functions * front right, rotatable - optional manual or automatic lowering of the saw bow * stepless adjustment of the saw bow lowering - saw band guide made of hard metal plates - hydraulic saw band tension - including digital value display - 2x saw band speeds - 1x BI-metal saw band - coolant device - 1x angle stop - chip removal brush - machine base frame with forklift pockets - operating instructions in German Functioning of semi-automatic operation: - electro-hydraulic clamping of the vice - electro-hydraulic lowering of the saw bow - electro-hydraulic raising of the saw bow - electro-hydraulic opening of the vice

Condition: new, cutting diameter 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 45 degrees: round 260 mm capacity 45 degrees: square 250 x 250 mm capacity 60 degrees: flat 170 x 170 mm capacity 60 degrees: square 170 x 170 mm capacity 60 degrees: round 180 mm turning speed range: 40 / 80 m/min dimensions of saw-band 3650 x 27 x 0,9 mm Control MEP engine output 1,5 / 1,8 kW weight 670 kg Equipment: - robust electro-hydraulic semi-automatic band saw machine (INDUSTRY) - with miter cuts from 45° right to 60° left * Miter adjustment via large turntable - MEP microprocessor control EVO to control all functions * front right, rotatable - optional manual or automatic lowering of the saw bow * stepless adjustment of the saw bow lowering - saw band guide made of hard metal plates Hnedpfx Aoxaav Ajb Iot - hydraulic saw band tension - including digital value display - 2x saw band speeds - 1x BI-metal saw band - coolant device - 1x angle stop - chip removal brush - machine base frame with forklift pockets - operating instructions in German Functioning of semi-automatic operation: - electro-hydraulic clamping of the vice - electro-hydraulic lowering of the saw bow - electro-hydraulic raising of the saw bow - electro-hydraulic opening of the vice

Condition: new, saw blade diameter 350 x 32 mm capacity 90 degrees: round 115 mm capacity 90 degrees: square 100 mm capacity 90 degrees: flat 1 x 80 mm capacity 45 degrees: round 100 mm links Hnsdpfjxabnmjx Ab Iet capacity 45 degrees: round 75 mm rechts

Condition: new, saw blade diameter 350 x Ø 30/40 mm cutting diameter 135 mm cutting length 430 mm dimensions of saw-blade 350x3,0/2,4x40 mm turning speeds 3800 U/min Hodpfjxabqzjx Ab Ijnt Dust suction hood 100 mm total power requirement 3,0 kW weight of the machine ca. 100 kg dimensions of the machine ca. 1300 x 800 x 1600 mm - Crosscut and miter saws for crosscuts - Miter adjustment on both sides (60° / 45°), with fixed stop - Compound cut on one side up to 45°, with fixed stop - Stable cast iron construction - Precise ball bearing guidance of the tool slide hardened and welded steel shafts - manual saw feed - Saw blade infinitely adjustable in height - socket for opt. suction Cutting data : - Cutting length at 90° = 430 mm - Cutting height at 90° = 135 mm - Cutting length at 45° = 310 mm - Cutting height at 45° = 92 mm Special accessories included: - 1x HM circular saw blade 350 x 3.0/2.4 x 40 mm Z = 108 FTZ neg. for aluminum and plastic - Hydraulic feed brake, continuously adjustable - Pneumatic material clamping from above consisting of: 2x vertical clamping cylinders, adjustable with hand levervalve - 1x machine stand - more powerful drive motor (3.0 kW)

Condition: new, cutting diameter 230 mm capacity 90 degrees: flat 230 x 230 mm capacity 90 degrees: square 230 x 230 mm vice 235 mm turning speed range: 15 - 100 m/min dimensions of saw-band 2950 x 27 x 0.9 mm Control MEP CNC total power requirement 3.18 kW weight of the machine ca. 1175 kg Hnodpfx Ajxabq Usb Ijt dimensions of the machine ca. 1980 x 1105 mm * Automatic two-column band saw with a footprint of only 2.5 square meters * * Highest performance in the smallest space * Features : - powerful CNC automatic band saw in two-column design * for cuts at 0° - with Windows-CE based touch screen control * 5.0 - 180° tiltable control panel * Up to 100 cutting programs, each with different quantities and lengths * Minimizes programming time for frequently executed jobs - 2x operating modes (semi-automatic and automatic) * enable efficient cutting under all conditions - Saw head feed via linear guides driven by hydraulic cylinders . with preloaded recirculating ball bearings * Reduction of mechanical vibrations during cutting - Automatic alignment of the front saw blade guide head * Reduces processing time - feed system with 600 mm stroke is repeatable and cuts all lengths - vertical pair of rollers can cut any type of bar or bundle material - infinitely variable blade speed adjustment from 15 to 100 m/min - robust cast iron structure (G25) to compensate for vibrations - Safety housing in accordance with the latest safety regulations . the Machinery Directive EN 13898/2007

Condition: new, saw blade diameter 355 mm capacity 90 degrees: round 130 mm capacity 90 degrees: square 125 x 125 mm capacity 90 degrees: flat 170 x 110 mm turning speeds 700 / 900 / 1100 / 1300 U/min mitre joint cuts -/+ degrees - 45 / + 0 total power requirement 3.5 kW weight of the machine ca. 25.0 kg Description: - mobile dry metal cutter - for use on a construction site, among other things - with brushless motor - particularly efficient, durable and maintenance-free - for burr-free sawing of profiles and pipes made of steel, iron, copper, brass, aluminum, plastics and composite materials without coolant - use e.g. in metal construction, in carpentry, for interior fitters, etc. - easy to transport - four speeds can be selected at the touch of a button - motor with soft start - digital display showing the selected speed . and current power in watts - angle adjustment 0° - 45° for miter cuts - vice with quick adjustment - large LED work light on the underside of the handle * to illuminate the work area - secure stand thanks to non-slip hard rubber feet Hnjdpsxabypjfx Ab Ijt - with spindle lock for quick saw blade changes - incl. 1x saw blade for steel 355x25.4x2.4mm Z66

Condition: used, machine/vehicle number: 007569, Max. panel width: 2200 mm Max. panel length: 4500 mm Main saw blade projection: 152 mm No of Grippers: 11 Thin sheet loading: yes Hedpjvrrldsfx Ab Ijnt

Condition: used, Year of construction: 2004, total length: 21,000 mm, total height: 2,750 mm, total width: 2,550 mm, Colour: Blue Weight: 8.000 kg Price: On request - Details: - └ Description: Available by 05-2026 (depending on delivery of new machine) - Year: 2004 - Documentation available: Yes Hodpsyy Nnqefx Ab Iont - CE marking present: Yes - CE certificate present: Yes - Serial number: 9076 - Main motor power: 15 - Control system: Windows 10 - Max. saw width: 450 - Max. saw height: 160 - Infeed table length: 8200 - Outfeed table length: 8900 - Max. infeed length: 8000 - Opstellengte [mm]: 23000 - Opstelbreedte [mm]: 5200 - Opstelhoogte [mm]: 2700 - Veiligheidsvoorziening: Safety light curtain, Enclosed fence - Options: Waste conveyor belt, Label printer, Marking pen - Voltage [V]: 400 - Fuse [A]: 63 - Power [kW]: 15.0 - Transport dimensions: 21000mm x 2550mm x 2750mm (l x w x h) - Transport weight [kg]: 8000kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: new, Available from stock! Comparable to Behringer, Kaltenbach, Kasto, Jaespa, etc. Semi-automatic bandsaw with dual-sided mitre adjustment from 90° to 30°, stepless via scale with 0.5° accuracy. Includes the optional micro-spraying system! Hydraulic lifting/lowering of the saw frame Hodpfxswcwggo Ab Ijnt Semi-automatic sawing cycle Hydraulic material clamping / short-stroke cylinder Rapid downfeed to material top edge 30° left Ø 130 or 120x120 45° left Ø 200 or 180x180 90° Ø 260 or 300x260 45° right Ø 200 or 180x180 30° right Ø 130 or 120x120 Remnant length 25 mm

Condition: excellent (used), Year of construction: 2007, Complete saw line consisting of loading unit, fully automatic circular saw, and unloading unit. Suitable for a wide range of applications, especially in the photovoltaic and automotive industries. Loading Unit: - Horizontal loading magazine model HLM - 4-strand timing belt conveyor - 6 compartments, each 285mm wide, for profile feeding - Maximum material height according to the saw cutting area; round material up to max. diameter 130mm - 3 sliding strips between timing belts as additional support - Profile length min. 2,700mm, max. 6,500mm Saw: - Fully automatic circular saw Pressta-Eisele model PROFILMA 510 E-SA - Saw blade diameter max. 500mm - Continuously variable speed adjustment - Hydro-pneumatic saw blade feed, infinitely adjustable, from rear to front - Siemens S7-300 control system with touchscreen - Reversing device with five-fold stroke up to max. 5,000mm - Electric material feed 3 – 1,000mm (single stroke) - Cutting gap extension on both sides - Pneumatic unloading slide - Scrap flap after saw for offcuts / remains Hodsxvbvvjpfx Ab Ient - Cut length depending on profile, from 8mm - Menzel minimum quantity lubrication system - Clamping pressure regulation - Two extraction nozzles for chip extraction Unloading: - Table size 1,500mm x 2,500mm - Pneumatic cross pusher

Condition: good (used), Year of construction: 2013, Double mitre saw for aluminium The saw blades can be swiveled and tilted. Control system: E355 Includes circular saw blades and extraction unit Technical data: Hnjdpfxjyw R Rzo Ab Iot Smallest cutting length at 90°: 375 mm Largest cutting length: 4500 mm Swivel angle inwards pneumatic: 90° - 45° (Manual up to 22.5° inwards and up to 140° outwards with digital display) Tilting angle inwards pneumatic: 90° - 45° (Intermediate angles manually adjustable with digital display and turret stop) Saw blade diameter: 550 mm Saw blade speed: 2250 rpm Power output per motor: 4 kW Dimensions: approx. 5790 / 1840 / 1985 mm Weight approx.: 2110 kg

Condition: new, Comparable to Behringer, Kaltenbach, Kasto, Jaespa, etc. Cutting range: 90° round: 260mm flat: 300x260mm smallest diameter: 5mm NC-controlled, automatic material feed with hydraulic material clamping Easy operation via NC control with plain text display Material feed function without reclamping the material for short sections Hnsdpfxsh Tnd Aj Ab Iot Stable, linearly guided feed clamp with servo positioning for maximum accuracy Automatic adjustment of the blade guide to material width Recommended options: powered chip brush, synchronized with blade speed separately positioned control panel 7" CE panel, network-enabled, capable of storing 1000 data sets, history storage for various functions and data, etc.

Condition: good (used), Year of construction: 2014, Cutting range examples: at 90° 260mm round 300x260mm rectangle at 45° left or right 200mm round 180x180mm rectangle at 30° left or right 130mm round 120x120mm rectangle Quick miter adjustment from 30° to 150° in stepless increments of 0.5° as indicated on the scale. The miter pivot point is the intersection between the saw blade and the material support, thus preventing any change in the length dimension. End stops at 30° + 45° left and 30° + 45° right Manual material clamping. In every angle position of the saw frame, the material is clamped parallel at 90°. Cutting pressure is reduced by the self-weight of the heavy, torsion-resistant saw frame and fine adjustment depending on the material cross-section via a hydraulic damping cylinder. MEBA Micro-Dosing System complete with spray head. Machine stand with chip collection tray. Hnodpfxszrmk Rj Ab Iot with the option of hydraulic lifting of the saw frame.

Condition: new, The cutting angle can be continuously adjusted manually within a range of 90° to 45°. Highly precise material feed, even with multiple feed cycles when cutting longer workpieces. Individual feed length: 500 mm. High feed rate possible while maintaining maximum accuracy. The 7.5-inch color touchscreen enables simple and intuitive control of all machine functions. The control unit allows programming of up to 60 programs for quick adjustment of the feed length. The machine can be controlled fully automatically, semi-automatically, or manually. The standard equipment includes control of the feed pressure, a stationary clamping device, and the feed rate. A frequency converter enables continuous adjustment of the saw blade speed within a range of 15-90 m/min. Hjdpfxjztva Dj Ab Isnt Cutting range examples: 90° round: 260 mm 90° square: 245 mm 90° rectangle: 245 x 250 mm +45° round: 180 mm +45° square: 170 mm +45° rectangle: 180 x 120 mm Including: Coolant system Pressure gauge for saw blade tension Mechanical saw brush Material slide

Condition: good (used), Year of construction: 1997, Max. cutting width: 310 mm Chain width: 340 mm with spikes Max. cutting height without rake: 90 mm Max. cutting height with rake: 75 mm Hnodszzrckopfx Ab Iot Engine power: 30 kW

Condition: excellent (used), CATALOGUE NUMBER: 8029 TECHNICAL DATA - track width: 300mm Hnedpfx Absztv Sas Ijt - working width of the roller: 300mm - max. blade diameter: 350mm - blade bore diameter: 70mm - max. cutting height: 120mm - table width with extension: 760mm - table length: 1540mm * from above: - deflectors (barrier to prevent material from recoiling) - metal feed roller, with pressure - deflectors/pawls - metal feed roller, with pressure - saw arbor - 2 smooth, metal feed rollers * from below: - guide strip - deflectors/pawls - track - central track lubrication - stepless feed speed adjustment - feed motor: 1.1kW - main motor: 18.5kW - diameter of dust extraction nozzle: 180mm - overall dimensions (L/W/H): 2250x1450x1600mm - weight: 1570kg ADVANTAGES - Made in Italy - Very good condition - Used multi-blade saw Net price: 36900 PLN Net price: 8786 EUR, depending on the exchange rate of 4.20 EUR (Prices may change due to significant exchange rate fluctuations)

Condition: excellent (used), Catalog number: 8082 TECHNICAL DATA - max. main blade diameter 400mm - main blade adjustable up/down and at an angle - spindle diameter 30mm Hnodpfx Aszwf Rasb Iot - spindle locking - with a crosscut fence - crosscut fence length 3200mm - cutting width with fence 1300mm - with a side fence - with a scoring saw - max. scoring saw diameter 120mm - scoring saw motor 0.75kW - main motor 5.5kW - 4 speed settings 2500/3250/5000/6500 rpm - table dimensions 1300x710mm - table extension 2130x1350mm - blade guard - dust extraction port diameter 80mm, 120mm - dimensions (L/W/H) 3500x3700x1500mm - weight 1193kg ADVANTAGES - Made in Poland - with a scoring saw - unpainted - used saw, very good condition Net price: 11900 PLN Net price: 2833 EUR, depending on the exchange rate of 4.20 EUR (Prices may vary due to significant fluctuations)

Condition: excellent (used), Catalog number: 8056 TECHNICAL DATA - max. disc diameter: 350 mm - disc bore diameter: 30 mm - disc guard - cutting height for a 300 mm disc: 90 mm - max. cutting width: 640 mm - ability to cut at an angle in the vertical plane, by adjusting the arm or the disc - arm rotation: right/left Hnsdpjznkz Esfx Ab Iet - motor: 400 V, 3 kW - table dimensions: 1000 x 800 mm - dust extraction port diameter: 50 mm - dimensions (L/W/H): 1800 x 1100 x 1510 mm - weight: 185 kg ADVANTAGES - Made in Italy - DTR documentation included - Very good condition - Used saw Net price: 7500 PLN Net price: 1786 EUR, depending on the exchange rate of 4.20 EUR (Prices may vary due to larger fluctuations)

Condition: excellent (used), Year of construction: 1978, functionality: fully functional, For sale is a robust Braun Canali band saw / resaw, type 1100, manufactured in 1978. The machine is in very good used condition and is designed for professional use in sawmills or for solid wood processing. The machine is particularly suitable for cutting and resawing boards and planks and features stepless feed and cutting depth control. Technical data: Hnjdpfx Abszxrtqj Ist Manufacturer: Braun Canali Type: 1100 Year of manufacture: 1978 Machine no.: 6234 Motor power: 15 kW Saw band length: 6,800 mm Saw band width: 60–100 mm Roller diameter: approx. 1,100 mm Stepless feed Weight: approx. 3,800 kg Can cut logs up to approx. 3,000 mm length × 600 mm diameter Equipment: Resawing device for cutting boards and planks programmable cutting depth control ELGO Electric Type 87P pneumatic lifting unit Cutting depth programmable – programming function currently defective Cutting depth can be adjusted manually on the control panel: 15–85 mm heavy-duty industrial design Condition and scope of supply as shown in the photos Important note regarding the control system: The programmable cutting depth control is currently not functional. However, the cutting depths can be adjusted manually via the control panel from 15 to 85 mm. Overall, the machine is in very good used condition. Inspection and demonstration possible by appointment. The machine is currently still at the customer's site, but would be available shortly! Transport possible for an extra charge! The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Subject to errors, prior sale and changes. All information without guarantee.

Condition: ready for operation (used), Year of construction: 1990, Available immediately, ex works: Like-new double miter saw EISELE EMMIGI Type FUTURA 2 TU / 6 Year of manufacture 1990 (only a few hours of operation) Saw blade diameter 450 mm Programming device Digital display Min. cutting length 240 mm Hodpfxozzvv Is Ab Isnt Max. cutting length 6000 mm 2 saw carriages Drive per saw 2.5 kW Weight 3 tons Price: Euro 4,000.---- plus VAT, ex works.

Condition: good (used), Year of construction: 1969, functionality: fully functional, power: 25 kW (33.99 HP), control voltage: 380 V, Completely refurbished, it is in very good condition and features adjustable feed. It comes with 4 new bandsaw blades, each 100 mm wide. Hnjdpsy U H Hajfx Ab Iet

Condition: new, Comparable with Behringer, Kaltenbach, Kasto, Jaespa, etc. 2-column guided bandsaw, semi-automatic model with stepless mitre adjustment on both sides, 30° - 45° - 90° - 135°. With patented mitre system (ERP No. 0491120). Particularly suitable for universal applications with various cross-sections, materials, and frequent mitre changes. The pivot point remains unchanged at any angle setting, allowing precise length measurement at 90° and in the mitre range. MEBA Eco-Saw-Innovation 2000 The universally applicable mitre bandsaw MEBA 335 DG is ergonomically advanced and offers an optimal price-performance ratio. Easy, centralised operation. The machine controls comply with CE standard 89/289. Hsdpfxst Dpw Rs Ab Ient Technical Data: Cutting range: round/flat 90° 335/500x335 mm 45° right 330/305x335 mm 30° right 180/170x335 mm 45° left 305/305x335 mm Cutting speed: AC frequency-controlled drive 15-150 m/min, steplessly adjustable via operator panel Drive - Saw band: 3 kW; 400 V, 50 Hz - Hydraulic: 0.55 kW - Coolant pump: 0.11 kW Saw frame feed: Stepless up to 300 mm/min, hydraulically controlled Saw band tension: Mechanical with torque wrench Saw band dimensions: 4400 x 34 x 1.1 mm Working height: 750 mm (without base elements) Weight: 1320 kg Bfpzm8E9K3 Dimensions (LxWxH): 1450 x 2350 x 1900 mm Technical modifications reserved. Standard equipment of the MEBA 335 DG-500 Semi-automatic sawing cycle with workpiece clamping - sawing - frame returns to preset height after completed cut MEBA High-Performance Package: Stepless hydraulic cutting pressure and feed monitoring at the blade back. This ensures optimal conditions for any sawing task, i.e., constant pressure for solid material and constant feed for thin-walled sections. Manual mitre adjustment with digital readout, accuracy to 0.1° Rapid lowering of the saw frame to the material edge via pushbutton Patented double mitre system (ERP No. 0491120) Unique double mitre bandsaw where mitres on both sides can be quickly and economically set by swiveling the saw frame and material support. Automatic movement of the clamping vices and digital mitre setting. The material vice automatically moves in the cutting direction to suit the desired mitre, ensuring the workpiece is always clamped square and close to the saw blade. The pivot point for mitre is at the intersection of the saw blade and fixed vice, so length measurements remain accurate regardless of angle. Hydraulic full-stroke workpiece clamping. Quick-clamping for material. At every saw frame angle, the material is clamped parallel at 90°. Rigid two-column linear guided saw frame Saw blade inclined 3° to the material support surface. Centralised machine control Saw frame clearance height adjustment Adjustable moveable blade guide arm for material width Carbide blade guide for band deflection wheels Synchronised chip cleaning brush Saw band tension with torque wrench Operating manual and spare parts list CETOP hydraulic system Coolant system (approx. 100 ltr.).

Condition: new, Year of construction: 2026, functionality: fully functional, New Cursal log splitting line for firewood – available IMMEDIATELY, instead of a 6-month lead time. A new TRV 1600L 700 ordered today directly from Cursal s.r.l. currently has a manufacturing lead time of 5 and a half to 6 months. This specific line, ordered in February 2026, is nearing completion and will be available immediately, ex-works from the Cursal factory in San Fior, Italy. Same price as a new order from the factory: €59,590, but without the 6-month wait. For a firewood producer, this means the line can be operational before the next winter season, rather than after. We ordered this line for our own production, but a change in our manufacturing process means it no longer fits our needs. It has never been delivered, installed, or operated outside the factory. * Full 12-month manufacturer's warranty from the date of delivery * CE certification * Collection directly ex-works in Italy, avoiding double transport * User manual and video tutorial included – over 90% of these machines are installed by the customers themselves * Optional installation by a Cursal technician available for approximately €2,250 ### Scope of supply Cursal order confirmation no. 2-01407/26 #### 1 × CURSAL TRV 1600L 700 Log splitting saw for bulk-loaded firewood of varying lengths * 15 HP blade motor with automatic braking and computer-controlled cutting * Adjustable cutting time from 0.6 to 2 seconds * Pneumatic blade movement * Piece length at entry: from 500 to 6,000 mm * Programmable cutting length: from 100 to 750 mm * Maximum cutting height at the blade center: 200 mm * Maximum width at the base: 520 mm * Feed speed up to 50 m/min * Variable speed motor * Pneumatic press with 6 independent toothed elements * Press stroke: 250 mm * 2 sawdust extraction ducts of Ø 100 to 140 mm * Complete side guards * Dimensions: 2,500 × 1,200 × 2,050 mm #### 1 × RAMM 4000 × 710 Motorized roller feed conveyor * 0.75 HP motor * Variable speed from 5 to 50 m/min * Galvanized rollers Ø 76 mm * Roller pitch: 125/250 mm * Capacity: 420 kg per roller * Lateral retaining barriers * Length: 4,000 mm #### 1 × HM 700-40-80 Widia® blade * Diameter: 700 mm * Bore: 40 mm * Number of teeth: Z 80/84 Hnodozm Twyjpfx Ab Ist ### Power supply * Electrical power supply: 400 V three-phase / 50 Hz * Protection rating: IP54 * Compressed air: 7 bar Ideal machine for firewood producers, sawmills, and biomass plants. With the winter demand approaching, this is the only opportunity to have a new, operational Cursal line available this season. Location: ex-works Cursal, San Fior (TV), Italy. Delivery can be arranged.

Condition: excellent (used), REMA DCKLW Band Saw Manufacturer: REMA Model/Machine Type: DCKLW Hedpfx Aezz Ilzeb Iont Year of Manufacture: 1984 Machine Category: Band Saw Location: Gorzów Wielkopolski Delivery Terms: SELF-COLLECTION Delivery Costs: Borne by the Customer Startup Type: To be agreed Description: Notes: MACHINE WITH HYDRAULIC SYSTEM, ACTIVATED BY A PEDAL. INDUSTRIAL, ARTICULATED BAND SAW WITH A CUTTING WIDTH OF 800 mm. Overhauled, 4 kW motor.