Used Used Transformers for sale (44,211)

Condition: good (used), Year of construction: 2016, functionality: fully functional, cooling capacity: 594.2 kW (807.89 HP), type of input current: three-phase, type of cooling: air, overall weight: 8,005 kg, input voltage: 400 V, total width: 2,250 mm, total length: 7,560 mm, total height: 2,400 mm, warranty duration: 6 months, heating capacity: 675.7 kW (918.70 HP), Aircooled chiller/Heat pump TRANE RTMA170 594.2 kW / 675.7 kW Cooling capacity: 594.2 kW / 168.96 tons (12/7 — 35°C) Heating capacity: 675.7 kW / 192.13 tons (40/45 —7°C) Year of manufacture: 2016 Options: Heat pump Refrigerant circuit: 2 pcs. Heat exchanger: 2 pcs. Shell and tube Condenser: Copper / Aluminum Compressors: 2 pcs. Frascold CXH51-140-538Y (screw) Type of refrigerant: R134а Number of fans: 12 pcs. (Frequency inverter) Dimensions: 7.56x2.25x2.4 m. Weight: 8005 kg Working hours: 11801/2195 h. Cgsdpfx Aexpvztehkew Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: good (used), Year of construction: 2013, functionality: fully functional, cooling capacity: 642 kW (872.88 HP), type of input current: three-phase, type of cooling: air, overall weight: 9,590 kg, input voltage: 400 V, total width: 2,400 mm, total length: 7,000 mm, total height: 2,400 mm, warranty duration: 6 months, Aircooled chiller CLIMAVENETA FX FC NG SL T+ S 2702 642 KW Cooling capacity: 642 kW / 182.5 tons (12/7 — 35°C) Year of manufacture: 2013 Options: Hydraulic module. Freecooling. Heat exchanger for refrigerant subcooling with coolant. Refrigerant circuit: 2 pcs. Heat exchanger: Shell and tube Condenser: Copper / Aluminum Compressors: 2 pcs. Bitzer CSH8583-125CVY-40D (screw) Type of refrigerant: R134A Number of fans: 14 pcs. Hydraulic module: 1 pcs. water pump Grundfoss NB65-125 (Freecooling) + 1 pcs. Grundfoss TY50-120 (Freecooling) +Grundfoss TY50-120 (Heat exchanger for refrigerant subcooling with coolant) 2 pcs.. Expansion vessel. Dimensions: 7x2.4x2.4 m. Weight: 9590 kg. Working hours: 4904/9813 h. Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS Cgsdovzzxxepfx Ahkow - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: good (used), Year of construction: 2016, functionality: fully functional, cooling capacity: 1,055 kW (1,434.40 HP), type of input current: three-phase, type of cooling: water, overall weight: 6,300 kg, input voltage: 400 V, total width: 1,650 mm, total length: 3,300 mm, total height: 2,300 mm, warranty duration: 6 months, Watercooled chiller TRANE RTHD 300 SE 1055 kW Cooling capacity: 1055 kW / 299.98 tons (12/7 - 30/35°C) Year of manufacture: 2016 Refrigerant circuit: 1 pcs. Heat exchanger: Shell and tube Compressors: 1 pcs. Trane CHHC1D1F0N0 (screw) Type of refrigerant: R134a Dimensions: 3.3x1.65x2.3 m. Weight: 6300 kg. Working hours: 8319 h. Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Codpfx Aheyha Naokogw Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: used, Year of construction: 2013, cooling capacity: 1,037.3 kW (1,410.33 HP), type of input current: three-phase, type of cooling: air, input voltage: 400 V, total width: 2,400 mm, total length: 9,900 mm, total height: 2,200 mm, Aircooled chiller RHOSS TCAVSZ21040 1037,3 kW Cooling capacity: 1037,3 kW / 294.9 tons (12/7 — 35°C) Year of manufacture: 2013 Refrigerant circuit: 2 pcs. Heat exchanger: Shell and tube Cedpjxzqpvofx Ahkegw Condenser: Copper / Aluminum Type of refrigerant: R134A Compressors: 2 pcs. BITZER CSH9583-21Y-40D (screw) Number of fans: 18 pcs. Hydraulic module: 2 pcs. LOWARA FCT4150-250 Dimensions: 9,9х2,4х2,2 m Compressors need to be repaired

Condition: good (used), Year of construction: 2015, functionality: fully functional, cooling capacity: 61.5 kW (83.62 HP), type of input current: three-phase, type of cooling: air, overall weight: 660 kg, input voltage: 400 V, total width: 1,060 mm, total length: 2,000 mm, total height: 1,750 mm, warranty duration: 6 months, heating capacity: 64.1 kW (87.15 HP), Aircooled chiller/Heat pump CIAT AQUACIAT2 ILDC 240V 61.5 kW/64.1 kW Cooling capacity: 61.5 kW / 17.49 tons (12/7 — 35°C) Heating capacity: 64.1 kW / 18.23 tons (40/45 —7°C) Year of manufacture: 2015 Options: Heat pump. Hydraulic module Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 2 pcs. Copeland ZP137KCE-TFD-455 (scroll) Type of refrigerant: R410a Number of fans: 1 pcs. Hydraulic module: 1 pcs. water pump, expansion vessel. Dimensions: 2x1.06x1.75 m. Weight: 660 kg. Working hours: 6660/6659 h. Condition: Good CONDITION, TESTING & READINESS Codpoy Axr Dofx Ahkegw The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: used, Year of construction: 2011, functionality: fully functional, cooling capacity: 161 kW (218.90 HP), type of input current: three-phase, type of cooling: air, overall weight: 2,500 kg, input voltage: 400 V, total width: 2,300 mm, total length: 3,620 mm, total height: 2,300 mm, warranty duration: 6 months, Aircooled chiller TRANE ECGAN600 161 KW Cooling capacity: 161 kW / 45.78 tons (12/7 — 35°C) Year of manufacture: 2011 Refrigerant circuit: 2 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 4 pcs. Danfoss CSHA150KE (scroll) Type of refrigerant: R407с Number of fans: 6 pcs. (2 pcs. frequency inverter driven) Dimensions: 3.62x2.3x2.3 m. Weight: 2500 kg. Working hours: 18195/18195/14900/14910 h. Condition: Good Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Cgjdpsyzzxqjfx Ahkjw Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, cooling capacity: 159 kW (216.18 HP), type of input current: three-phase, type of cooling: air, overall weight: 2,500 kg, input voltage: 400 V, total width: 1,250 mm, total length: 3,540 mm, total height: 2,200 mm, warranty duration: 6 months, heating capacity: 184 kW (250.17 HP), Aircooled chiller/Heat pump MTA TAEevo TECH 802 159 kW/184 kW Cooling capacity: 159 kW / 45.21 tons (12/7 — 35°C) Heating capacity: 184 kW / 52.32 tons (40/45 —7°C) Year of manufacture: 2016 Options: Heat pump. Hydraulic module. Refrigerant circuit: 2 pcs. Heat exchanger: Finned evaporator immersed in tank Condenser: Copper / Aluminum Compressors: 4 pcs. Copeland ZP182KQE-TFD-477 (scroll) Type of refrigerant: R410a Number of fans: 3 pcs. (Frequency inverter) Hydraulic module: 1 pcs. water pump Lowara PLM112B14S2/355-E, expansion vessel. Dimensions: 3.54x1.25x2.2 m. Weight: 2500 kg. Working hours: 8650/7460 h. Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. Cgsdpfeyzzqtex Ahksw WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, cooling capacity: 77 kW (104.69 HP), type of input current: three-phase, type of cooling: air, overall weight: 1,400 kg, input voltage: 400 V, total width: 2,100 mm, total length: 2,600 mm, total height: 2,350 mm, warranty duration: 6 months, heating capacity: 87 kW (118.29 HP), Aircooled chiller/Heat pump DAIKIN EWYQ080 DAYN 77 kW/87 kW Cooling capacity: 77 kW / 21.9 tons (12/7 — 35°C) Heating capacity: 87 kW / 24.7 tons (40/45 —7°C) Year of manufacture: 2014 Options: Heat pump. Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 2 pcs. Danfoss SJ180B4ABE (scroll) Type of refrigerant: R410a Cgodpfsyymh Ujx Ahkew Number of fans: 4 pcs. Dimensions: 2.6x2.1x2.35 m Weight: 1400 kg Working hours: 11860/11861 h. Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, type of cooling: air, overall weight: 2,310 kg, total width: 1,100 mm, total length: 4,400 mm, total height: 1,800 mm, warranty duration: 6 months, heating capacity: 265.5 kW (360.98 HP), HEAT PUMP KEYTER KWE6270QEP4W 265,5 Kw Heating capacity: 265.5 kW / 75.6 tons (40/45 — 7°C) Year of manufacture: 2019 Options: Hydraulic module Refrigerant circuit: 2 pcs. Codpfsvf Ebxjx Ahkegw Condenser: Copper / Aluminum Heat exchanger: Plate Type of refrigerant: R410A Compressors: 2 pcs. DANFOSS DSH240A4APC + DANFOSS DSH295A4APC (scroll) Number of fans: 3 pcs. EBMPAPST A3G800-AU25-01 Hydraulic module: 2 pcs. water pump EBARA 30/1 50-160/7.4 expansion vessel. Weight: 2310 kg. Dimensions: 4.4 x 1.1 x 1.8 m. Working hours: 1024/1024/1477/1474 h. Condition: Excellent

Condition: new, power: 327 kW (444.60 HP), fuel type: diesel, fuel tank capacity: 610 l, emission class: euro3, Year of construction: 2019, operating hours: 6,630 h, Country of origin: South Korea Displacement: 12,700cc Dimension: 12,260 X 3,340 X 3,790 Bucket size: 2.2 Cubic Meter Cjdpfxey Tyf Hj Ahkogw Arm length: 3.38 m Boom length: 7.06 m Track shoe: 600 Attachments piping: Available Overall Weight: 49.50 Ton Bucket Capacity: 2.20 m3 Boom/Arm/Bucket: STD without Quick Coupler with breaker line = More information = Number of cylinders: 6 GVW: 49.500 kg

Condition: ready for operation (used), Year of construction: 2007, load capacity: 360 kg, arm reach: 2,400 mm, controller manufacturer: KUKA, controller model: KRC2, Compact, extremely fast and with a unique combination of payload and reach: these attributes make KUKA comp series robots are the obvious choice for a wide range of applications – e.g. handling or spot welding. Model: KR360 L240 Payload: 360 kg Reach in mm : 2400 mm Condition: Used & Tested Year: 2007 Included: Manipulator + KRC2 Cabinet + Teachpendant + All Wire Sets PLC MERKEZI Refurbishment Services Include: • Cleaning: The surface of the robot panel and the robot has been cleaned. • Oil Changing: The oils of all axes (6 axes) of the robot have been replaced. • Battery Changing: All batteries have been replaced with the new ones. • Mechanical Maintenance: Gear wheels counter balance are checked and maintained after weight, repeatability tests. • Electronical Maintenance: Includes drivers, electronic boards, teach pendant and PC maintenance. • Polishing and Repainting: After the cleaning the robot gets polished and be painted to its original colour, can be painted to the colour that you desired. Shipment expenses are not included in the price Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands.We also offer custom engineering services and design for your specific production needs. Cjdsw H A Hmepfx Ahkogw (Source: Kuka's Website)

Condition: used, Year of construction: 2017, machine/vehicle number: LC623, Used Thermoforming Packing water cup line - 11500 BPHTechnical Specifications & Performance DataThis used bottling line is a complete cup filling and packaging solution engineered for beverage production in water applications. The centerpiece is the TR-ALP 10 cup form-fill-seal machine, designed to thermoform, fill, seal, and cut PET cups with high efficiency. With a 5x2 format (10 cavities per cycle) and a working capacity of 17–20 cycles/min, the system achieves up to 12,000 cups/hour, ideal for second hand industrial packaging lines seeking reliable output. The integrated end-of-line equipment includes a robot cartoner, a case erector, a case sealer, and conveyors for smooth downstream handling.Production speed: up to 12,000 cups/hour (10,200–12,000 cups/hour typical)Cycle rate: 17–20 cycles/minCavity configuration: 5x2 (10 cavities per cycle)Punch size: 71 x 71 mmSupported cup formats: 100 ml and 200 mlBase material: PET film, 500–700 micronLid materials: Aluminum 40 µm or 12 µm / APET + 12 µm / HSL heat-sealable, peelableProduct contact parts: Stainless steel AISI 316Maximum film width: 390 mm (base), 375 mm (upper)Reel diameters: lower 800 mm, upper 300 mmMain machine weight: approx. 2,500 kgCase sealer model: GEM F470Case erector model: F2000Advanced Automation & Control SystemsThe line features robust automation for consistent cup forming, accurate dosing, and reliable sealing. The TR-ALP 10 employs a time-controlled gravimetric dosing system with 10 control valves for uniform fill volumes. Electrical architecture is industrial-grade with clear protection ratings and safety circuitry.Power supply: 3 x 380 V ACInstalled power: 25 kWCurrent: 40 AFrequency: 50 HzControl voltage: 24 V DCDosing system: time-controlled gravimetric, 10 valvesFilling temperature: 15–25 °CSafety hardware: integrated emergency and safety switching (industrial components)Production Line Integration CapabilitiesEngineered for seamless industrial packaging, the line integrates cup production with end-of-line case handling. A vacuum pick-and-place robot cartoner manages multiple cup sizes, with packing recipes for both 100 ml and 200 ml formats. Automatic case erecting, sealing, and three conveyors enable inline or modular operation in diverse layouts.End-of-line: robot cartoner, case erector F2000, case sealer GEM F470, conveyorsPacking configuration: 30 cups/carton (200 ml: 2 layers 15x2; 100 ml: 3 layers)Format flexibility: 100 ml and 200 ml tooling setsContainers: PET cups; secondary packaging in cartonsMachine Condition & Maint... Cjdpfxjy Icp Dj Ahkogw

Condition: used, Year of construction: 2003, machine/vehicle number: LC632, Used KRONES spirits filling line, roud glass 36.000 BPH - year 2003Technical Specifications & Performance DataThis complete round glass bottling line delivers high-speed performance for industrial packaging and beverage production. Built around Krones engineering, the line is configured for glass bottles in 0.7L, 0.75L, and 1.0L formats. With an output of 500–600 BPM (up to 36,000 bottles per hour), it is a robust second hand solution for producers seeking reliable throughput and consistent product quality.Production speed: 500–600 BPM (up to 36,000 bph)Filling type: vacuum filingBottle formats: Compatible with 0.7L, 0.75L, 1.0L bottle formatsContainers: Designed for Glass bottle handlingCore components (models): Krones Variojet (72-head rinser), Krones Isofill (108-head isobaric filler), Krones Topmatic/Zalkin (18-head capper), Cold glue front & back labeling, Logics & Control Logilook label inspection (2015), Krones Kettner Wrapapac W60 (wraparound case packer), Krones/Kettner Robogrip robot, Krones Multidivider laner, Amberflex spiral case elevator, Linx 7900 bottle coder (2017), Orwak 9020 waste compactor (2006)Case formats: Wraparound boxes, 6 & 12 pack configurationsMain build year: 2003 (with upgrades in 2006, 2015, and 2017)Electrical supply: 415 V, 50 Hz (most main equipment); auxiliary devices at 240 V, 50 HzAdvanced Automation & Control SystemsThe line integrates automated material handling and inspection to ensure stable operation and quality assurance. The Krones Multidivider laner and Robogrip robotic handling enhance flow balance and downstream palletizing, while the Logilook system provides label presence and position verification. Changeovers between compatible glass formats are supported by standardized Krones change parts and adjustable guide-rails for efficient setup.Automated depalletizing, lane division, and robotic case handlingInline label inspection for consistent presentationOperator HMI terminals at key stations (typical Krones layout)Rapid format adjustments for 0.7L, 0.75L, and 1.0LStable 50 Hz operation; widely supported industrial componentsProduction Line Integration CapabilitiesThis used bottling line is designed for seamless in-line operation from bottle depalletizing to case packing. It accommodates round glass bottles and integrates labeling, coding, and inspection for end-to-end quality control. The wraparound case packer enables efficient secondary packaging for 6- and 12-pack configurations, ensuring compatibility with standard palletizing patterns.End-to-end flow: depalletizer → rinser → isobaric filler → capper → cold glue labeller → label check → coder → laner → case packer → spiral case elevator → palletizing robotSuitable for beverage production requiring glass bottle processingModular stations allow standalone testing or full inline operationMachine Condition & Maintenance HistoryManufactured in 2003 with subsequent upgrades in 2006 (waste handling), 2015 (label inspecti... Cgedpfxsy Ud Ale Ahkow

Condition: used, Year of construction: 1996, machine/vehicle number: LC633, Used STORK minature line for glass & PET 200 BPMTechnical Specifications & Performance DataThis used bottling line is engineered for miniature formats and optimized for high-efficiency beverage production. Configured specifically for 50 ml bottles, it handles both PET and Glass containers and supports multiple shapes including flask, oval, and round. The core of the line is a Stork rinser–filler–capper monoblock with a 36-head rinsing/filling carousel and a 9-head capping turret. Downstream operations include a Krones Autocol 3-station self-adhesive labeling machine for front and back labels, integrated inspection and rejection systems, and complete case packing, sealing, coding, and conveying.Production speed: 12.000 BPH (miniature 0.05L bottles)Filling type: vacuum fillingBottle formats: Compatible with 0.05L bottle formatContainers: Designed for PET and Glass bottle handlingSupported shapes: Flask, oval, roundMonoblock configuration: 36-head rinser/filler, 9-head capperClosures: ROPP, cap sizes 18×12 and 20×12Labeling: Krones Autocol, 3 stations, self-adhesive front and backInspection: Level control with case reject, checkweigher, scale checkEnd-of-line: Case packer, case sealer, case coder with reject, case erectorElectrical: 415 V / 50 Hz (main equipment), 240 V / 50 Hz (auxiliaries)Key model references: Logilevel HF1400, Logiweight LS, Autocol, U375, C890, 800AF-E, Spiralveyor SVManufactured by: Stork (core monoblock); major components by Krones, Garvens, Linx, 3M, Kettner, AmbaflexAdvanced Automation & Control SystemsThe line features modernized automation with a new PLC/HMI installed in 2021 on the Stork monoblock for improved diagnostics, recipe management, and process stability. Integrated inspection modules provide level control and automatic reject functionality, while the checkweigher and scale check ensure consistent fill accuracy for 50 ml packaging. Electrical distribution supports mixed voltages with 415 V / 50 Hz for primary machines and 240 V / 50 Hz for auxiliary systems. Change parts and synchronized conveyors support quick transitions among miniature flask, oval, and round formats.Production Line Integration CapabilitiesThe system is designed as a complete packaging solution from bottle infeed through case handling. Stainless-steel header tank and bottle conveyors stabilize upstream product and container flow. The Krones Autocol labeler integrates seamlessly with miniature bottle handling for precise self-adhesive label placement. Downstream, a coordinated end-of-line section provides case packing, sealing, coding with reject, case erection, and a spiral conveyor for efficient elevation and accumulation management. The line’s configuration is ideal for second hand industrial packaging upgrades or integration into existing beverage production environments focused on miniature formats.Machine Condition & Maintenance HistoryThe core monoblock and labeler date to 1996, with significant ... Cgedoy Uduuepfx Ahkew

Condition: used, Year of construction: 2013, machine/vehicle number: LC634, Used BERTOLASO Epica filling line for spirits, glass & PET - 12000 bphTechnical Specifications & Performance DataThis complete used bottling line is centered on a Bertolaso Epica 32/32/8 rinsing, filling, and capping monoblock. Designed for mixed container handling, it supports both flask-shaped and round bottles in Glass and PET. The line operates up to 200 bpm (approximately 12,000 bph depending on format) and is equipped with a wet glue labeling system for front and back labels. Components span key packaging stages from depalletizing through case packing and sealing, with integrated print and inspection.Production speed: up to 200 bpm (format-dependent)Filling type: Vacuum fillingBottle formats: Compatible with 0.1L, 0.2L, 0.3L, 0.375L, 0.5L bottlesContainers: Designed for PET and Glass bottle handling; flask and round shapesCore monoblock: Bertolaso Epica 32/32/8 (rinsing/filling/capping)Labeling: Wet glue, front and back application (Cavagnino & Gatti C4810)Inspection: Fill level check (Logilevel plus)End-of-line: Case packer, case sealer, case coder, spiral elevatorsElectrical supply: 415 V / 50 Hz primary (with 240 V / 50 Hz devices where indicated)Key models/years: 1994–2022 across sub-systemsAdvanced Automation & Control SystemsThe line integrates automated handling and quality control to ensure consistent beverage production. The Bertolaso monoblock provides synchronized rinsing, filling, and capping with centralized controls for format management. The Logilevel plus inspection system supports automated fill-level verification to maintain product quality. Conveyors, case handling equipment, and the labeling station operate with coordinated start/stop logic, enabling smooth, continuous flow across the production line. Electrical architecture is standardized around 415 V / 50 Hz, with auxiliary devices at 240 V / 50 Hz, facilitating straightforward integration with typical industrial power systems. Operator access points and changeover settings are designed to support efficient adjustments between formats.Production Line Integration CapabilitiesThis second hand industrial packaging solution offers full in-line operation from bottle depalletizing to finished case handling. It is configured for both PET and Glass containers, including flask-shaped and round bottles, and is suitable for multiple small bottle formats from 0.1L to 0.5L. Integrated conveyors connect every module, while the case erector, case packer, sealer, and printing functions ensure complete end-of-line packaging. The wet glue labeller supports dual-panel (front/back) applications to meet brand presentation requirements. The Spiralveyor equipment assists with elevation changes and compact layouts.Machine Condition & Maintenance HistoryThis used bottling line comprises components manufactured between 1994 and 2022, with the core filling monoblock from 2013 and subsequent upgrades at inspection (2017) and end-of-line elevation (2022). The balanced mix of modern and proven machinery delivers reliable performance for beverage pr.. Cjdpfx Aoy Szcwohkegw

Condition: used, Year of construction: 1996, machine/vehicle number: LC635, Used STORK glass filling line for spirits 12000 BPH - shaped, taperedTechnical Specifications & Performance DataThis complete used bottling line for glass bottles is engineered around a Stork rinser–filler–capper monoblock with vacuum filling, complemented by wet-glue front, back, and neck labeling. It is a second hand industrial packaging solution designed for efficient beverage production on round, shaped, and tapered glass containers.Line type: Complete glass bottling lineProduction speed: 200 BPM (approximately 12,000 bottles per hour)Bottle shapes: Round, shaped, taperedFormats: Compatible with 0.35L, 0.7L, 0.75L, 1.14L bottle formatsContainers: Designed for Glass bottle handlingFilling principle: Vacuum fillingLabeling: Wet glue labeller for front, back, and neck labelsElectrical supply: 415 V / 50 Hz on most equipment; select components 240 V / 50 HzKey equipment and model references:Depalletizer: Osmeka VAE (1996)Rinser-Filler-Capper Monoblock: Stork RVR30/146-36-9 LW (1996)Labeller: Cavagnino & Gatti CG84CL3/18 (wet glue)Laner: Stork SIE1500PB3 (1996)Case packer: Stork (1996)Case sealer: 3M 800 Afe (1998)Carton erector: Bortolinkemo with Nordson hot glue applicator (2013)Checkweigher: Logics & Control Logiweight LS (2016)Spiral carton elevators: AmbaFlex SpiralVeyor SV (2022 and 2013)Advanced Automation & Control SystemsThe line integrates automated bottle handling, synchronized conveying, and coordinated controls across depalletizing, rinsing, filling, capping, labeling, and end-of-line packaging. The monoblock provides precise vacuum filling for consistent fill levels on glass containers. The wet-glue labeling station applies front, back, and neck labels at line speed. Ancillary equipment such as the Nordson hot melt system on the case/carton erector and the Logiweight checkweigher support reliable, data-driven quality and packaging integrity. Electrical configurations are standardized at 415 V / 50 Hz for heavy equipment and 240 V / 50 Hz for the checkweigher.Production Line Integration CapabilitiesDesigned for seamless inline operation, this used bottling line includes a laner for flow management and spiral carton elevators for vertical transport, optimizing footprint and maintaining throughput. Format changeovers cover 0.35L to 1.14L glass bottles, handling round, shaped, and tapered geometries. The system integrates upstream depalletizing through to case erecting, packing, sealing, and weight inspection, providing end-to-end industrial packaging capability for beverage production.Machine Condition & Maintenance HistoryThis second hand bottling equipment set comprises components manufactured between 1996 and 2022, reflecting a maintained and progressively updated line. It is presented as a complete used bottling line suitable for recommissioning into beverage production. Component ages vary, with the core Stork monoblock originating in 1996 and end-of-line elements ... Cedpfx Ahey Szb Hjkogw

Condition: used, Year of construction: 2018, operating hours: 3,500 h, machine/vehicle number: LC636, Used filling KHS Innofill can line 16000 CPH - year 2018Technical Specifications & Performance DataThis complete used bottling line is a second hand beverage canning system engineered around a KHS can filler block, integrated with high-quality upstream and downstream packaging machinery. Designed for industrial packaging and beverage production, it delivers reliable performance for aluminum cans.Production speed: up to 16000 cph (cans per hour)Primary filler: KHS Innofill Can C (2018)Can seamer: Ferrum FC03 (2018)Depalletizer: SKA Fabricating Can-I-BusInspector: Heuft fill level detectorRinser: AV-C500 can air rinserDryer: Air Control Industries can dryerLabeller: Pack Leader (Advanced Dynamics system)Case packer: Atlanta Rafaello 726Case coding: SATO S86-EX printerConveyors: KHS and AE Conveyors, plus KBR outfeed belt conveyor with PCUtilities/auxiliaries: Conveyor lubricator (Loewados)Container type: Aluminum cansDocumentation: Hard‑copy manuals includedAdvanced Automation & Control SystemsThe line is equipped with dedicated control cabinets for conveyors and labeling, supporting coordinated start/stop logic and smooth product handling. The KHS Innofill Can C filler block provides modern automation architecture with line-friendly integration, recipe handling, and synchronized drives for consistent filling and seaming operations. Safety interlocks and guarding are present across key stations for operator protection and process reliability.Production Line Integration CapabilitiesThis packaging line offers end-to-end integration from depalletizing to case packing, enabling seamless flow of cans through rinsing, filling, seaming, inspection, drying, labeling, and secondary packaging. Modular conveyors by KHS, AE Conveyors, and KBR facilitate balanced accumulation and stable transfer, helping maintain throughput at rated speeds. The configuration is suitable for a wide range of beverage production scenarios and can be adapted to different aluminum can sizes with appropriate change parts and guides.Machine Condition & Maintenance HistoryAs a second hand used bottling line, the core process equipment includes 2018-generation KHS Innofill Can C filler and Ferrum FC03 seamer. The asset list indicates a complete, coherent set of stations with hard‑copy manuals available, supporting efficient commissioning, maintenance, and spare parts management. The line is presented in working condition and ready for operation, subject to standard site preparation and utilities.Operational Performance & VersatilityDesigned for high-efficiency can handling, the line features a SKA Fabricating depalletizer for automated infeed, an air rinser for internal container preparation, precise isometric filling via KHS Innofill Can C, and robust double seaming with the Ferrum FC03. Quality assurance is enhanced by a Heuft fill level detector. Downstream, an Air Control Industries dryer pre... Csdpfxjy Szbyo Ahkogw

Condition: used, Year of construction: 1991, machine/vehicle number: R58, Used isobaric filler Machine Bertolaso 11000 bph year of the remark of isobaric filler 2021 suitable for bottling sparkling and semi-sparkling wines entrance on the left completely overhauled isobaric filler in all its parts with original Bertolaso spare parts (documentable) bottle sizes 85, 88, 90, 112 Codpfx Ahsvguv Uekogw 6 sets of channels with isobaric filler to make the levels the electrical panel of the Used Isobaric Filling Machine according to CE standards use and maintenance manual, spare parts manual available for this isobaric filler the production speed of isobaric filler is 9000 BPH with the sparkling wine the production speed is 7000 BPH with spumante. This isobaric filler is immediately available and delivered in case of purchase. We can assist the buyer in each step of the commissioning and testing operation of the Used Isobaric Filling Machine. How to build one isobaric triblock: The isobaric filler can be connected either to an automatic rinsing machine or to one or more cappers. We have 40 Bertolaso SBR grippers and two series of Bertolaso mushroom and satin cappers. One has 6 heads and reaches 9.000b / h, and one has 10 heads and reaches 14.000 BPH We can introduce all the machines in a sterile clean room with a filtration system. You can have the performance of an isobaric triblock with a Used Isobaric Filling Machine for natural cork and mushroom. Productivity can be from 11,000 to 14,000 BPH. It is possible to foresee a periodic maintenance program for isobaric filler to always have excellent efficiency. This involves both having spare parts in stock and foreseeing machine stops for a week/10 days. In case of purchase of the isobaric filler triblock, at least 9.00 meters by 2.50 meters, H 4.00 meters are required. The creation of a clean room guarantees the absence of contamination in the bottling phase.

Condition: excellent (used), ABB IRC5 Controller USED,20% discount at order more then 1 unit DEVELOPMENT OF GSG ROBOTICS Cedpfsxq Tvdox Ahkjgw GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc.

Condition: used, Year of construction: 2011, machine/vehicle number: M337, Used RAVECCO MORAVEC filling triblock 12-12-1C for waterTechnical Specifications & Performance DataThis second hand Filling Monoblock by Raveco Moravec combines rinsing, filling, and capping in a compact rotary platform designed for efficient beverage production and industrial packaging. Engineered for glass bottles, it is a reliable choice for a used bottling line seeking flexible closure options and straightforward integration.Manufacturer: Raveco MoravecModel: 12-12-1C MonoblockSpeed: 2.500 BPH ( Bottle per hour)Configuration: 12 rinsing grippers, 12 filling valves, 1 capping headContainer types: Glass bottlesBottle formats: Compatible with 0.33L, 0.5L, 0.75L, 1.0L bottle formatsNeck finish: Long neckClosures: crown capsConstruction year range: 2009–2011Machine type: Rinser–Filler–Capper monoblockAdvanced Automation & Control SystemsThe machine utilizes a Moravec control platform with manual operation, providing straightforward and dependable control for operators. Core functions for rinsing, filling, and capping are synchronized within the monoblock to maintain consistent bottle handling and process timing. Operator access is designed for quick intervention and basic parameter adjustments, supporting reliable changeovers between closure types.Moravec control system with manual operationSynchronized monoblock timing for rinse–fill–cap sequenceOperator-friendly controls for format adjustmentsStandard emergency stop and interlocked guarding typical of industrial packaging machineryProduction Line Integration CapabilitiesThis Filling Monoblock is configured for a straight-line conveyor layout, enabling smooth integration within a used bottling line or operation as a standalone module. It accepts a range of glass bottle formats and supports quick format and closure changeovers, making it suitable for flexible beverage production environments.Inline integration on straight conveyor layoutsStandalone or in-line operation within broader bottling equipmentFormat flexibility from 0.33L to 1.0L glass bottlesChangeover capability crown closuresMachine Condition & Maintenance HistoryThe equipment is currently in occasional operation and has been in service approximately 25 hours per week during recent use, with remaining time on standby. It has been serviced regularly over the past year of ownership. Testing is available, including both dry run and production tests, to verify operational performance before integration into a second hand production line.Operational status: Occasional operationTesting availability: Dry run and production test possibleService status: Regularly serviced during recent useDocumentation: Technical manuals and schematics not on handSpare parts: Not includedOperational Performance & VersatilityDesigned for glass bottles with a long-neck fi... Cgjdpsy Uvhmofx Ahkjw

Condition: used, Year of construction: 2006, operating hours: 67,130 h, machine/vehicle number: R77, Used Filling Machine A3 Flex 100V 1000 Edge 7000 bph Upgrade in 2024, excellent condition and warranty on the replaced spare part Overview of the Used Filling Machine A3 Flex Cgjdpfx Aswbhdajhkjw The Used Filling Machine A3 Flex 100V 1000 Edge 7000 bph delivers advanced aseptic filling performance for dairy-based beverages and fruit juices. Originally, Tetra Pak manufactured this A3 FLEX 100V model in 2006. However, in 2024, the company upgraded it to the 100V version. As a result, the machine now complies with modern standards for process control, performance, and operational safety. Therefore, it remains a highly relevant and reliable option for current production needs. Packaging Format and Technical Configuration The Used Filling Machine A3 Flex supports the 1000 ml Edge format, a version of the Tetra Brik package that features an inclined top edge. Consequently, the design improves ergonomic handling and simplifies the application of screw caps. Furthermore, the system uses a single filling valve, which aligns with the standard architecture of A3 Flex machines. These machines perform the filling process vertically under aseptic conditions. In addition, the setup preserves a sterile environment throughout all stages: forming, filling, and sealing. Output Capacity and Operational Hours The Used Filling Machine A3 Flex 100V 1000 Edge 7000 bph delivers a nominal output of 7000 packs per hour. Hence, it ranks among mid-to-high performance solutions in the aseptic filling sector for non-carbonated beverages. Over time, the machine has logged 67,130 working hours, which technicians can use as a key metric for technical assessment. Despite the machine’s age, its solid maintenance history and the 2024 upgrade ensure that it can continue operating effectively in demanding production environments. Product Applications and Hygienic Design The Used Filling Machine A3 Flex handles dairy and juice products with ease. Moreover, it meets all aseptic packaging requirements, including sterilization and hermetic sealing. The manufacturer built the internal circuits and filling chamber with stainless steel. As a result, the design enables efficient sanitation and ensures compatibility with clean-in-place (CIP) procedures. Additionally, the hygienic design aligns with current food safety standards for the beverage industry, thus making it suitable for sensitive applications. Integration and Control System of the Used Filling Machine A3 Flex The Used Filling Machine A3 Flex offers a compact footprint and a modular structure. Therefore, technicians can integrate it seamlessly into existing bottling lines. Alongside its structure, the machine includes a centralized HMI control panel. Operators use this interface to manage daily activities. Not only does it simplify the workflow, but it also allows for quick adjustments to production parameters or packaging formats. Conse...

Condition: used, Year of construction: 1994, operating hours: 34,000 h, machine/vehicle number: LC613, Used line tetra pak TBA 8 - 1L slim 6000 PPHTechnical Specifications & Performance DataThis second hand complete bottling line is engineered for industrial packaging of aseptic carton containers, centered on the renowned Tetra Brik Aseptic platform. Designed for beverage production environments that demand hygiene and reliability, it provides end-to-end handling from aseptic filling through cap application to final case packing. As a used bottling line, it offers a cost-effective route to expand capacity while maintaining quality standards.Main filler: Tetra Brik Packaging Systems AB TBA 8 / 1000 SLIMConstruction year (main filler): 1994Package format: 1.0L Slim cartonSpeed: 6000 Packs/hour (PPH) Auxiliary equipment: Tetra Pak Cap Applicator 21; Tetra Pak Cardboard Packer 70Line application: Aseptic carton filling with downstream capping and case packingCompliance: CE markedAdvanced Automation & Control SystemsThe line leverages factory-integrated automation from the Tetra Brik Aseptic platform, designed for consistent performance and operator-friendly control. Safety interlocks and guarded access points support secure operation during beverage production. Standardized control architecture streamlines start-up, shutdown, and recipe management for the 1.0L Slim carton format.Centralized operator interface for coordinated filler, capper, and packer functionsAutomated sequences for aseptic filling and downstream handlingSafety circuits and emergency-stop devices for protected operationDesigned to support quick diagnostics and routine maintenance tasksProduction Line Integration CapabilitiesThis used bottling line integrates aseptic filling with cap application and case packing to create a cohesive industrial packaging solution. It is suitable for beverage production environments requiring carton handling and end-of-line packing. The cap applicator 21 and cardboard packer 70 are configured to work inline with the TBA 8 / 1000 SLIM, minimizing transfers and ensuring stable throughput.Inline configuration from filler to cap applicator to case packerOptimized for 1.0L Slim carton containersCompatible with standard conveyor and accumulation layoutsDesigned for inline operation; can be adapted to existing conveyor systemsMachine Condition & Maintenance HistoryOffered as a second hand, complete bottling line in working condition and ready for operation. It presents an efficient option for facilities seeking a pre-owned aseptic carton solution without the lead times typical of new equipment. Routine recommissioning and line integration services are recommended according to site standards.Operational status: Ready for operationCommercial status: Used/second hand industrial packaging lineOperational Performance & VersatilityThe TBA 8 / 1000 SLIM is a proven aseptic filler for carton containers, engineered for stable, hygienic beverage production. Downstream, the cap applicator 21 ensures accurate closure application, while the ... Cgedsyvpt Espfx Ahksw

Condition: used, functionality: fully functional, inner diameter: 900 mm, Used steady rest for conventional POREBA TR-115 lathes – Ø 450 mm, roller type Csdpfx Ahoy E Nxmjkogw For sale: used steady rest designed for conventional POREBA TR-115 series lathes. Equipped with rollers to ensure stable support of the workpiece during machining. Technical data: Diameter range: 450 mm Type: roller steady rest Condition: Used Description: Perfect for machining long and heavy workpieces. Improves machining accuracy and reduces vibrations.

Condition: used, machine/vehicle number: LC650, Used Sidel bottling line for still - sparking water - 14400 BPHTechnical Specifications & Performance DataThis used bottling line is configured for PET bottle handling and optimized for water production, covering both carbonated and still products. The system combines isobaric filling technology with robust end-of-line packaging, offering reliable performance for medium-speed beverage production.Production speed (maximum): 14,400 bph with 0.5LAdditional speeds: 9,000 bph with 1.5L still water; 7,000 bph with 1.5L carbonated waterBottle formats: Compatible with 0.5L, 1.0L, 1.5L bottlesContainers: Designed for PET bottles with air conveyors for empty bottle transportFiller technology: Isobaric; neck 26 mmLabeling: KHS Innoket 21 N (2002) and SACMI OPERA (2011)Shrink wrapper: SMI LSK45 T (2001)Pallet wrapper: TOSA 125 (1995)Chiller: M.T.A. TAEevo TECH 121 (2025)Ancillary equipment: SIAD Macchine Impianti unit (1999)Electrical highlights (components): SMI LSK45 T: 400 V, 50 Hz, 22 kW, 37 A; M.T.A. chiller: 400 V, 50 Hz, 20 kW, 35 A, IP54Advanced Automation & Control SystemsThe line benefits from upgraded controls to ensure repeatable operation and ease of use. Air conveyors for empty bottles and belt conveyors up to the shrink wrapper have been overhauled and equipped with new electrical panels. The capper has also been overhauled with a new electrical panel, supporting stable operation and format reliability.Overhauled conveyor controls with new electrical panelsCapper overhauled in 2012 with new electrical panelCE-marked components across key stationsFormat pre-sets on the labeler for multiple bottle sizesProduction Line Integration CapabilitiesEngineered for smooth in-line operation, this second hand bottling line integrates air conveyors for lightweight PET handling, precision labeling, and robust end-of-line packaging. Quick changeovers are supported by pre-configured labeling formats, enabling efficient switches between common water bottle sizes.Inline configuration from bottle handling through packagingAir conveyors for empty bottles and belt conveyors up to shrink-wrapperLabeling line-up: KHS Innoket 21 N and SACMI OPERA for multi-format flexibilityEnd-of-line shrink wrapping with SMI LSK45 T and pallet stabilization by TOSA 125Bottle size range: 0.5L, 1.0L, 1.5LSuitable for water production (still and carbonated)Machine Condition & Maintenance HistoryThe line includes several components that have undergone maintenance and overhauls aimed at improving reliability and uptime. Air and belt conveyors up to the shrink-wrapper have been revised, with new chains and new electrical panels installed. The capper was overhauled in 2012 and fitted with a new electrical panel. The KHS Innoket 21 N labeler is set up for multiple formats, streamlining changeovers.Conveyors overhauled; new chai... Cgedpfx Aezg In Tehkow

Condition: new, Year of construction: 2021, machine/vehicle number: LC645, Used KRONES Aseptic filling line for PET 54000 BPH - 2021Technical Specifications & Performance DataThis Krones aseptic PET complete bottling line delivers high-speed performance and sterile processing for sensitive, high-acid beverages. Engineered for efficiency and reliability, it combines advanced stretch-blow molding, dry aseptic filling, capping, inspection, labeling, and end-of-line handling to ensure consistent quality at scale.Production speed: 54000 bphContainer types: Designed for PET bottle handlingBottle formats: Compatible with 0.15L, 0.23L, 0.5L bottle formatsNeck and cap: 38mm neck finish with double-layer 38mm capAseptic method: Dry Aseptic (high-acid product capability with gas unit)Blow molder: CONTIFORM 324 SPEED, 24 cavitiesFiller-Capper bloc: CONTIPURE ASEPTBLOC DA VFJ 4.320-132-103, 132 filling valves and 44 capping nozzlesInspector: CHECKMAT 731 FM-X+LYear of manufacture: 2021Operating hours: 0 (never used)Documentation: All manuals availableAdvanced Automation & Control SystemsThe line integrates Krones SitePilot Line Diagnostics for real-time performance monitoring, data analysis, and process optimization. Coordinated controls across blow molding, aseptic filling, capping, inspection, labeling, and conveying enable stable, repeatable operations and efficient ramp-up to nominal speed. Dry aseptic technology minimizes media consumption while maintaining sterile conditions for high-acid beverages.Production Line Integration CapabilitiesEngineered as a complete system, this bottling line includes cap sorting and feeding, preform handling, container conveying, coding, multiple labeling technologies, drying, and quality inspection. It supports smooth inline operation and rapid format changes within the 150 ml to 500 ml range.Cap sorting and feeding systemPreform feed unit and PREFORMCHECK RT preform inspectorContainer conveyor systemLaser and inkjet coding unitsSleeve labelers with tunnel, neck labelers, and anti-counterfeit labelersFull-bottle X-ray inspection and Krones CHECKMAT inspectionDrying system and extraction hood for the blow molderHigh-pressure compressor and pure steam generatorMachine Condition & Maintenance HistoryBrand new, never used, and still in original packaging with 0 working hours. Manuals are included to support commissioning and operation. Equipment has not been in production and presents as factory-new.Operational Performance & VersatilityThis aseptic PET bottling line is optimized for high-acid beverage production, combining Krones dry aseptic technology with precise stretch-blow molding and hygienic filling. Multiple labeling stations (sleeve, neck, anti-counterfeit) and integrated coding provide strong brand presentation and traceability. Inline inspection with X-ray and CHECKMAT enhances quality control for fill level, closure, and packaging integrity.Installat... Cgodozg D Tlspfx Ahkow