Used Used for sale (46,537)

Year of construction: 2022, condition: used, functionality: fully functional, machine/vehicle number: 10038587, Pasteurizer PA500-RWT-Gas Used Iijdpfxjtpcm Is Agyeh Subject to prior sale!

Year of construction: 2003, condition: used, Mobile cooking station with a ceramic cooktop/griddle and a bain-marie. Iiodpfxoh Euuzs Agysh

Condition: as good as new (ex-display), ATS strapping machine US-2000 AD Sheet size 360x260/30 mm Ijdpfxjhk I Nmo Agysih • Simple, efficient, and compact standard machine • Wide selection of different sheet sizes • High machine safety and easy accessibility • Height-adjustable and powerful • Equipped with digital control DCP 2000 The US-2000 AD is a mobile, compact, and automatic machine. The wide selection of sheet sizes allows for optimal adaptation to your product. To increase efficiency, we offer our customers, upon request, special sheet sizes in addition to the numerous standard dimensions (see back). The switchable, adjustable fixed length or soft tensioning allows for both tight and gentle strapping for soft products. The height adjustment and legroom allow for comfortable operation, even when sitting.

Condition: like new (used), 42 linear meters of galvanized pallet racking for outdoor use, Nedcon Like new, see pictures! A top-quality racking system from the renowned manufacturer NEDCON - this is a subsidiary of Voestalpine AG with its headquarters in the Netherlands. Frame: Height 7.2 m, depth 110 cm, strong profiles, reinforced bracing, wind and snow load taken into account. Frame and base plates are hot-dip galvanized. Beam length 2.7 m, hot-dip galvanized Beam profiles 130/50mm, beams with load capacity per bay: 4000 kg Negotiable price: on request! Offer includes: + 16 units of frames, pre-assembled, depth 110 cm, height 7.2 m + 90 units of beams, length 2.7 m, 4000 kg load capacity per bay + 180 units of locking devices + 32 units of concrete anchors Surcharge for hot-dip galvanized feet including upright protection: €50,- per frame (net) Roof structure available on request! Load capacity signs, documents, etc. are of course included. Further accessories can be found in the accessories catalog. Goods are in stock. Transport and assembly are possible on request. Other configurations available on request. Over 2000 linear meters available. Inspection possible at any time by appointment. Further information on request. Constantly over 5000 linear meters of pallet racking from numerous manufacturers in stock. (Changes and errors in technical data, information and prices, as well as prior sale reserved! See our terms and conditions, all prices excl. VAT, ex warehouse) Lenox Trading – Top warehouse technology & heavy-duty racking, used & new Description: Are you looking for high-quality warehouse racking for sale? With around 100 employees, Lenox Trading is one of the largest dealers in new and used warehouse technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ PROMPTLY AVAILABLE: • Over 10,000 linear meters of racking promptly available • 20,000 m² of storage platforms & steel construction platforms immediately available • 30–50 semi-trailers of goods turnover weekly for maximum selection 📦 OUR ASSORTMENT (BUY CHEAPLY ONLINE): Ijdsfndllopfx Agyeih Whether it's pallet racking, heavy-duty racking, high-bay racking, shelving systems, tire racks, or racking for IBC containers - we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, dismantling, and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / LIQUIDATION: • SSI Schäfer (Schäfer Warehouse Technology, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, Heavy-duty racking Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND PILLAR: ONLINE AUCTIONS & LIQUIDATION For dismantling and clearance orders, we offer a complete worry-free package: 1. Fixed-price purchase: Purchase of merchandise, equipment & complete inventory including thorough clearance. 2. Commission auction: Conducting auctions on behalf of clients. Our full-service through our own employees: cataloging, office preparation, inspection, goods delivery, logistics, dismantling, and thorough handover. Whether you found us through heavy-duty racking or are looking for heavy-duty racking, galvanized / heavy-duty racking system - we guarantee the best conditions. Contact us for a non-binding offer!

Condition: used, Feed unit MAKA -used- Iodpou R S R Ujfx Agyeih infinitely variable feed speed ----- Technical data ----- Rollers: 3 pieces

Condition: used, machine/vehicle number: H2X386V04476, Year of construction: 2019, operating hours: 24,655 h, load capacity: 1,800 kg, lifting height: 6,075 mm, mast type: triplex, fork length: 1,200 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,800 kg Lifting height: 6,075 mm Fork length: 1,200 mm Fork spreader: 350–1,000 mm MACHINE DETAILS Mast: Triplex mast with full free lift Drive type: Electric Battery: 48 V, 625 Ah Battery voltage at rest: 50.8 V Dimensions & Weight Iiedpfjz Nv Ewjx Agyjh Dimensions (L x W x H): 3,200 x 1,150 x 2,671 mm Own weight: 3,800 kg Service valid until: UVV 07/2027 UVV inspection valid until: UVV 07/2027 Operating hours: 24,655 h EQUIPMENT Former Linde full-service unit Facelift model Tilt angle indicator Side fall protection White, non-marking tires LED work light, front LED work light, rear Road traffic lighting with turn signals Safety Light, front Safety Light, rear Comfort seat with lumbar support and seat heating Hydraulics: 3rd and 4th valve Side shifter All dimensions are rounded values. No guarantee is given for typographical and measurement errors. Collection conditions: Side loading up to 6 tons is possible using a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If the machine is not collected on time, a storage fee of €20 per machine and day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 131

Condition: used, machine/vehicle number: 516221X00500, Year of construction: 2020, operating hours: 7,736 h, load capacity: 1,600 kg, lifting height: 5,000 mm, mast type: triplex, fork length: 1,200 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,600 kg Lifting height: 5,000 mm Fork carriage adjuster: 300–860 mm Fork length: 1,200 mm MACHINE DETAILS Mast type: Triplex mast with full free lift Drive type: Electric Iedpfx Ajz Nwa Aogyoih Battery voltage: 48 V Battery capacity: 625 Ah Battery idle voltage: 50.9 V Service valid until: 06/2027 UVV inspection valid until: 06/2027 Dimensions & Weight Dimensions (L x W x H): 3,300 x 1,150 x 2,150 mm Machine weight: 3,300 kg Operating hours: 7,736 h EQUIPMENT Semi-cabin Windshield wiper LED work light, front LED work light, rear Orange warning light Safety light, rear Comfort seat Previously a Still full-service unit Hydraulic functions: 3rd + 4th valve Side shifter All dimensions are rounded values. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible using a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine and day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 144

Condition: used, machine/vehicle number: 517388V00095, Year of construction: 2019, operating hours: 6,982 h, load capacity: 3,500 kg, lifting height: 4,500 mm, mast type: triplex, fork length: 1,200 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 3,500 kg Lifting height: 4,500 mm Fork length: 1,200 mm MACHINE DETAILS Mast: Triplex mast with full free lift Drive: LPG Dimensions & Weight Dimensions (L x W x H): 4,000 x 1,200 x 2,250 mm Weight: 5,017 kg Next service due in: 901 hours UVV certificate valid until: 07/2027 Operating hours: 6,982 hours EQUIPMENT Former Still full-service unit Fork positioner with side shifter Semi-cab with windshield wiper LED work light (front) LED work light (rear) Orange warning light Comfort seat LPG gas cylinder with quick-change system Hydraulics: 3rd and 4th auxiliary valve All dimensions are approximate. No guarantee is given for typing or measurement errors. Iiedpoz Nwbtsfx Agysh Collection conditions: Side loading up to 6 tons is possible using a large forklift on site. Loading is at your own risk. Rear loading via ramp possible for truck heights of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receiving payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 148

Condition: ready for operation (used), functionality: fully functional, screw diameter: 200 mm, Granulation of temperature- and shear-sensitive plastics Suitable for soft PVC Suitable for rigid PVC Suitable for HFFR formulations Suitable for elastomer compounds for low-, medium-, and high-voltage cables Isdsz Ngaxepfx Agyoih TECHNICAL DETAILS Screw diameter: 200 mm Length from feed inlet to end: approx. 1,100 mm L/D ratio: approx. 5.5 : 1 MACHINE DETAILS Drive power: 72.5 kW Overall machine length: approx. 2,500 mm Feed inlet height: approx. 1,000 mm EQUIPMENT Eccentric granulation EGR Degassing zone Can be used as a single-screw extruder for various processing applications

Condition: used, Year of construction: 2021, Working area 3000 x 1500 mm Max. laser capacity 4 Kw (TruDisk 4001) Isdpfxoxr U U Rj Agyeih Max. thickness 25/20 mm (Mild steel/Stainless steel) Integrated camera for process surveillance (with monitor interface) Control: Siemens Sinumerik 840 D SL with 18” touch screen Automatic speed regulation Programmerbel automatic shut down of the machine Kobber cutting package Brass cutting package Equipped with: Automatic pallet changer Price when bought in 2021: Euro. 365.000

Condition: excellent (used), - Model: Cristal FM1 Electric - External dimensions (WxDxH): 1250x1575x2280 mm - Door opening: 600x1650 mm - Trolley: 400x800 - 250g baguette capacity: 90 baguettes - 400g bread capacity: 60 loaves - Control panel - Temperature control - Electric power: 43.5 kW Iedpfx Aowxmgzsgyoih - Weight: 825 kg - Refurbished equipment: The equipment is prepared upon order; collection and return times are agreed upon at that moment (please request the price after refurbishment)

Condition: used, - Model: Cristal FM1 Electric - External dimensions (WxDxH): 1250x1575x2280 mm - Door passage: 600x1650 mm - Trolley: 400x800 - Baguette capacity 250G: 90 baguettes - Bread capacity 400G: 60 loaves -Control panel - Temperature regulation Iodpewxmg Iofx Agyeih - Electric power: 43.5 kW - Weight: 825 kg

Condition: used, - External dimensions: 1750x3210x2300 mm - Model: ET123/L - Internal dimensions: 1230x2500 mm - 3 chambers, 6 openings - Baking chamber height: 4x200 mm - Last baking chamber height: 2x240 mm Iisdpfx Agjwxmpcsyeh - Loading space: 3060 mm - With scissor loader - Usable surface: 9.2 m² - Power consumption during baking: 16.20 kW/h - Installed power: 27.00 kW - Frequency: 50 Hz - Voltage: 400 V

Condition: excellent (used), - Four dimensions (LxWxH): 2800x3310x2660 mm - 3 decks - 3 levels - Deck width: 700 mm - Deck depth: 2220 mm - Front width: 2120 mm - Baking surface: 13.99 m2 - Production capacity: * 140 loaves of 400 g * 196 baguettes of 250 g * 1343 croissants - Hood dimensions: 200 mm - Power: 52 kW - Voltage: 400 V - Weight: 5600 kg - With scissor loader elevator Iedpowxmpiofx Agysih - Refurbished equipment: The equipment is prepared upon order; handover and return dates are agreed at that time (please request price after refurbishment).

Condition: excellent (used), - Deck dimensions: 1875x2340x220mm - Baking surface: 6.3 m² Iisdpfx Agowxmpvjysh - Integrated loader elevator - 3 decks, width 124 cm (6 openings, length 62 cm) - Baking depth: 170 cm - Deck height: H200 +200+250 mm - Refurbished equipment: the equipment is prepared upon ordering; pickup and return deadlines are agreed at that time (please request the price after refurbishment)

Operating hours: 6,836 h, condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 2,000 kg Lifting height: 4,620 mm Free lift: Full free lift Mast: Triplex mast Fork length: 1,200 mm Fuel: LPG Operating hours: 6,836 h UVV valid until: 09/2027 Next service due in: 204 operating hours MACHINE DETAILS Manufacturer: Linde Type: H20T Year of manufacture: 2016 Own weight: 3,290 kg Overall length: 3,400 mm Overall width: 1,150 mm Overall height: 2,200 mm EQUIPMENT Side shifter 3rd hydraulic valve 4th additional hydraulic valve, free for fork positioner Half cab Windshield wiper Non-marking white tires LED work light (front) LED work light (rear) Orange warning light Safety light (front) Safety light (rear) Comfort seat with lumbar support Seat heating Ijdpfxoz R D Ayj Agyoih LPG gas exchange bottle Previously a Linde full-service unit All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Lateral loading up to 6 tons is possible using a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receiving payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out within the specified period, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 213

Year of construction: 2018, condition: new, functionality: fully functional, machine/vehicle number: 36817, Vulcan 24" OD × 20" Sonic Loop Turret Coiler Winder with Automatic Cut & Transfer – BRAND NEW The Sonic Loop Turret Coiler is a two-spindle turret-type winding system designed for continuous, virtually tensionless coiling of extruded profiles. Isdpfx Agozz N Evjyjih The extrudate is fed to the coiler through an ultrasonic sensing dancer system, which monitors the position of the extrudate loop and automatically adjusts the speed of the servo-driven winding spindles. This provides smooth, controlled winding while minimizing tension on the extruded product. The unit is equipped with an automatic cut-and-transfer system, allowing the product to be rapidly transferred from the full reel to a new empty reel without interrupting the coiling process. Technical Specifications Winder Type: Two-spindle turret coiler Maximum Reel OD: 24" Reel Width: 20" Centerline Height: 42" Line Speed: Up to 200 FPM on 8" diameter core Drive: Servo-driven spindles Loop Control: Ultrasonic sensing dancer Cut & Transfer: Automatic Electrical Supply: 380 VAC, 50/60 Hz, 3-phase Condition: Brand New / Never Used The equipment was manufactured and underwent final assembly/testing at the Vulcan facility before shipment. It has never been placed into production and is currently stored and ready for shipment. Original documentation is available where applicable. Available for immediate sale. Inspection and shipping arrangements can be coordinated with the buyer.

Condition: new, Year of construction: 2018, New R&B Plastics Machinery MAX 5-Extruder System Heavy-duty, purpose-engineered multi-extruder system manufactured by R&B Plastics Machinery, consisting of four MAX 1-1/4" × 30:1 extruders mounted over one MAX 2" × 24:1 main extruder, complete with specialty mounting structure, material loaders, heated adapters/hoses and centralized Allen-Bradley PLC controls. The system was fully assembled, integrated, inspected and pre-shipment tested at R&B's Saline, Michigan facility and has never been placed into production. Extruders (4) R&B MAX 1-1/4" × 30:1 X102 or equivalent bimetallic barrel liners Interchangeable standard-output screws Rossi gearboxes with high-temperature Viton seals 5 HP Marathon AC motors Four heat/cool barrel zones Heaters, high-speed blowers & dual thermocouples Rupture discs & pressure transducers Watlow melt-temperature probes & mica band heaters Stainless-steel hoppers Adjustable 45° feed-throat/carrier assemblies (1) R&B MAX 2" × 24:1 Main Extruder Non-vented, air-cooled configuration MAX IMPACT high-output screw Colmonoy 56 flight lands X102 or equivalent bimetallic-lined barrel 25-30 HP Marathon Blue Max TEFC motor Rossi helical gear reducer Maximum screw speed: 100 RPM Three individually controlled heat/cool zones Melt-temperature & pressure transducers Stainless-steel hopper and water-cooled feed section Multi-Extruder Mounting System Engineered for 4 × 1-1/4" extruders over 1 × 2" main extruder Heavy-duty welded mounting frame Individual adjustment posts & safety stops Specialty extended main base Material Handling & Transfer (5) Foremost B-6-2 self-contained vacuum loaders (4) R&B heated adapter assemblies (4) heated hose assemblies, up to 12 ft R&B MAX PLC Control System Allen-Bradley CompactLogix PLC 15" Allen-Bradley operator control screen (4) 5 HP + (1) 25-30 HP Allen-Bradley VFDs PLC-controlled extruder heating/cooling Air-conditioned main electrical cabinet EWON remote-access system Integrated wire trays and electrical distribution Designed for 380 V / 3 Phase / 50 Hz Open-architecture electrical drawings, machine logic and documentation Condition: NEW / Never Used Complete documentation and operating manuals available. Important Scope Information Profile/die tooling and water bath are not included. Proprietary zipper/profile tooling and associated proprietary components are not included. The control cabinet contains provisions for additional downstream equipment, including water-bath and winder connections; these provisions should not be interpreted as inclusion of that downstream equipment in this R&B system listing. Equipment is stored and ready for shipment. Inspection available. Iiodpfx Agjzz Thboyoh

Condition: used, functionality: unexamined, Used BARMAG / EMS-Inventa AG extrusion and spinning-related industrial equipment available in Thailand. The equipment is currently installed at an existing industrial facility in Thailand. The available equipment includes BARMAG and EMS-Inventa AG machinery together with various auxiliary and process equipment, including: - Extrusion-related machinery - Spinning-related production equipment - Process vessels and tanks - Feeding / dosing equipment - Pumps and auxiliary equipment - Motors and gearboxes - Heating and cooling systems - Electrical control cabinets - Process piping and auxiliary systems The equipment is offered as used machinery. The exact models, manufacturing years, technical specifications, completeness and current operating condition are subject to verification. The equipment may be available as a complete production line, individual machines or selected components, depending on the buyer's requirements. Additional photographs, nameplate information and technical details can be provided to interested buyers. Iodpfjz Hzuqex Agyjih The equipment is located in Thailand and can be inspected by appointment. Dismantling and transportation are to be arranged with the buyer.

Year of construction: 2024, condition: new, We are offering this new Machine Wala Enterprise MSA-2 double-die semi-automatic paper plate making machine, manufactured in 2024. Manufacturer: Machine Wala Enterprise Model: MSA-2 Year of Manufacture: 2024 Condition: New Category ID: 691 Type: Double-die semi-automatic paper plate making machine Iodez E Damopfx Agysih If you have any questions or require further information, please send us a message or call us.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: KUKA KR 6 R900-2 SEL, load capacity: 6 kg, arm reach: 900 mm, controller manufacturer: Kuka, controller model: KR C5, Equipment: documentation/manual, For sale: KUKA KR 6 R900-2 / SEL industrial robot from the AGILUS-2 series. This compact, fast, and highly accurate six-axis industrial robot is ideally suited for machine tending, assembly, material handling, pick-and-place tasks, quality control, and other automation applications. Isdpfx Aoz D Twfjgyoih Technical specifications: • Manufacturer: KUKA Deutschland GmbH • Type: KR 6 R900-2 / SEL • Series: AGILUS-2 • Year of manufacture: November 2021 • Number of axes: 6 • Nominal payload: 6 kg • Maximum reach: 901 mm • Robot weight: 57 kg • Serial number: 4554837 • Item number: 0010028422 • Country of origin: Germany The KR AGILUS series is designed for space-saving, high-speed, and precise industrial applications. It can be mounted on the floor, wall, or ceiling. The robot can be viewed in person. Additional photos and technical information are available upon request.

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Battery Manufacturer: Still Type: 24 V 4 PzS 620 Ah Battery voltage: 24 V Capacity: 620 Ah Year of manufacture: 2022 MACHINE DETAILS Dimensions and weight Overall length: 800 mm Overall width: 300 mm Overall height: 800 mm Net weight: 500 kg All dimensions are approximate values. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible using a large forklift on site. Loading is done at your own risk. Rear loading via ramp is possible with a truck bed height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Iijdpfoz R Rhqox Agyjh Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. A storage fee of €20 per machine per day will be charged for late collection. Any outstanding storage fees must be paid in full before collection. Lot number: 1171

Condition: used, Year of construction: 2005, operating hours: 1,40,000 h, functionality: limited functionality, Name: Used CHP Unit Manufacturer: Köhler / Ziegler Type: SY 53 GSM Year built: 2005 Ijdpfx Aswyax Tjgyjih Generator: Leroy Somer Generator Type: LSA 44.27/4 Generator kW: 132 kVA Fuel type: Sewage gas Electrical power: 53 kW Thermal power: 87 kW Driving force: MAN E0836 E302, 6 Zylinder, 56 kW Dimensions: L 3600 x W 950 x H 1750 mm Empty weight: 2200 kg Technical doc.: Yes Message: The Engine was changad in 2013 Condition: Used Price: On demand

Condition: reconditioned (used), Year of construction: 2022, functionality: fully functional, power: 1,143 kW (1,554.05 HP), warranty duration: 12 months, # NorthGlass BU1E60 Glass Tempering Furnace – Fully Refurbished – 12-Month Warranty We offer for sale a NorthGlass BU1E60 horizontal glass tempering furnace equipped with a forced convection heating system. The furnace is pre-owned and has undergone a comprehensive refurbishment, including the replacement of major mechanical, electrical, and electronic components. Refurbishment work includes the replacement of: - Heating elements - Ceramic rollers - Electric motors - Automation and control systems - Electronic components The furnace has been fully refurbished and prepared for further industrial operation. Warranty: 12 months. ### Main Technical Specifications - Manufacturer: NorthGlass (China) - Model: BU1E60 - Condition: Used, fully refurbished - Maximum glass size: 2,850 × 6,000 mm - Minimum glass size: 300 × 300 mm - Glass thickness: 5–22 mm - Heating system: Forced convection - Convection system: 6 high-temperature upper convection fans with variable frequency control - Production capacity: 16–18 batches/hour (5 mm clear glass) - Heating power: 1,143 kW - Quenching fan power: 2 × 220 kW - Rated electrical capacity: 1,100 kVA - Minimum Low-E emissivity: ε = 0.04 - Quality standard: GB15763.2-2005 ### Supported Glass Types - Clear float glass - Low-E coated glass - Patterned glass - Body-tinted glass ### Equipment Configuration The furnace includes: - Loading table - Heating section - Flat glass quenching section - Unloading table - Electrical control system - Frequency converters - Air circulation system - Quenching fans with vibration isolation frames ### Key Advantages - Fully refurbished with replacement of major components - Advanced forced convection heating technology - Suitable for processing Low-E glass - Large processing capacity of up to 2,850 × 6,000 mm - High productivity of up to 18 batches per hour - 12-month warranty - Cost-effective alternative to purchasing a new glass tempering furnace ### Price and Delivery Iodpfx Ajz Rv Dpogyeih Price: Upon request Delivery terms and additional technical information are available upon request. Contact us for a detailed quotation, additional photographs, videos, and technical documentation.

Condition: excellent (used), Year of construction: 2020, operating hours: 626 h, functionality: fully functional, machine/vehicle number: 41304029, USED CUMMINS GENERATOR SET C/W STAMFORD ALTERNATOR MODEL : KTA50-G3 ENGINE SERIAL : 41304029 ALTERNATOR MAKE : STAMFORD Ijdez Sidaepfx Agyjih ALTERNATOR MODEL : HC1634J1 ALERNATOR SERIAL NO : X18D18472 HOUR : 626 YEAR : 2020