Used V-Tines for sale (33,336)

Condition: ready for operation (used), Heidenhain / Grundig VIC30 AES 2 / IN0853694 control board SN:7171033 Grundig No. 0.881.952-0 VIC30 from Gildemeister CTX 600, used, minor signs of wear, 100% fully functional, delivery as per photos. Fedpfx Aox Dwqxefpefu

Condition: excellent (used), flowmeter Endress-Hauser Pulsmag V + Variomag measuring range:0,0420 m3/sec Power 0 - 20 mA Temperature max. 80 °C lining material: HG Connections DN 150 /PN16 Voltage 220 V measuring range Frequency 50 Hz Length 220 mm Fsdpfxjfcb Nbe Afpofu Width 260 mm Height 350 mm Weight 13 kg

Condition: not inspected (used), Year of construction: 1985, functionality: fully functional, pressing force: 50 t, bale length: 1,000 mm, bale width: 750 mm, bale height: 75,07,50,750 mm, bale weight: 500 kg, input voltage: 400 V, overall weight: 7,500 kg, oil tank capacity: 500 l, power: 30 kW (40.79 HP), empty load weight: 7,500 kg, input frequency: 50 Hz, Manufacturer: Paal Typ: Pacomat V Year of construction: 1985 Press power main press: 50 t Fjdpfxjic Rl De Afpofu Specific press capacity: 5 kg/cm² Feed channel: 1.000 x 720mm (l x w) Theoretic throughput rate: 200 cbm/h Bale size: 700 x 1.000 mm (w x h) length adjustable Driving motor: 30 kW Bale weight: approx. 500 kg Machine weight: approx. 8t The hydraulic unit is functional, the drive motor is in the removed state.

Condition: new, Year of construction: 2023, 50 mm 1250 mm Ffjdpfx Afewp S U Sspou 1345 - MK 5 bore depth 270 mm spindle turning speed range 56-1450 U/min

Condition: used, first registration: 10/2011, Year of construction: 2011, M&V 902 Container Chassis High Cube Extendable ● ABS ● Air suspension ● Lift axle ● Raise/lower system ● 3 x SAF axles with disc brakes ● Tyres: 385/55 R 22.5 ● Container mounts: 20 ft / 2 x 20 ft / 1 x 30 ft / 1 x 40 ft ● Gross weight: 39,000 kg ● Unladen weight: 6,300 kg ● Payload: 32,700 kg Fedjx Nc D Dspfx Afpefu !! Extendable at rear and in the middle !! - German semi-trailer - TÜV / MOT: New on request and at extra cost! Subject to errors and prior sale! = Further information = Please contact Joannis Arpantzanis or Kai Bühler for further details.

Condition: ready for operation (used), empty load weight: 1,300 kg, x als gemotoriseerd Max longitudinal travel X-axe: 815 mm Max cross-travel Y-axe: 400 mm Max travel Z-axe: 420 mm Power on spindle: 2 HP Admission in millinghead: ISO 40 Max quill travel Z': 130 mm Spindlespeeds: 57 > 2275 rpm Table size: 1120 x 255 mm Ffjdpfx Aoxpgfiefpeu

Condition: new, Year of construction: 2021, V-hold 4-sided, 5-spindle planer, model VH-M 521 - width from 25 to 230 mm - height from 8 to 160 mm 1st from the bottom - 7.5 kW 2nd from the right -7.5 kW 3rd from the left -7.5 kW 4. from the top -11 kW 5. from the bottom - 7.5 kW - 5.5 kW feed from 6 to 36 m / min - revolutions 6500 / min - diameter of the spindles 40 mm - feed for short, opposite the right spindle - pressure in front of and behind the upper spindle. - manual table lubrication pump Fsdpfx Ajhq Rp Hjfpofu - machine weight 3100 kg In stock

Condition: used, functionality: fully functional, empty load weight: 6,920 kg, overall weight: 24,000 kg, axle configuration: 3 axles, first registration: 12/2008, loading space length: 6,400 mm, loading space width: 2,500 mm, loading space height: 3,170 mm, total length: 9,000 mm, total width: 3,250 mm, total height: 4,000 mm, suspension: air, tire condition: 60 %, color: yellow, trailer brake: trailer braked, Year of construction: 2008, Equipment: ABS, Truck trailer with Edscha sliding roof Ffjdpjx Ati Uofx Afpeu First registration: 05.12.2008 L/W/H: 9000/2550-3250/4000 mm Internal length: 6400 mm Unladen weight: 6,920 kg Gross vehicle weight: 24,000 kg Inspection valid until: 11/2025 Equipment: - Loading ramps, 14 t load capacity + supports - Hydraulically extendable rear portal - Lifting roof - Oversized width up to 3.25 m under tarpaulin - Interior height 3.17 m

Condition: good (used), - Mitre cut length (mm): 100 - Adhesive medium: hot melt adhesive - Automatic composition: of frame parts Fodpfx Ajm Sfnjfpofu

Condition: excellent (used), Year of construction: 2013, functionality: unexamined, machine/vehicle number: 1803007, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, mount diameter: 40 mm, total height: 2,000 mm, total width: 1,300 mm, total length: 2,100 mm, table width: 400 mm, table length: 800 mm, rotational speed (max.): 2,000 rpm, rotational speed (min.): 40 rpm, overall weight: 1,500 kg, input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, Connected load: 3 kW Ffedswdn Anjpfx Afpeu EQUIPMENT: Three-axis digital display (SINO)

Year of construction: 1989, condition: reconditioned (used), *originally pre-evacuation filler *converted to double pre-evacuation *with 30 filling valves and 10 head crown corker *including vacuum pump *In this filler 1,800 working hours were invested, that means everything was overhauled including a new ball bearing slewing ring. So the filler is in a really perfect top condition. *equipped for one bottle type (250ml) can be converted to up to 500ml *max 265mm heigh/85mm diameter Fjdpfjni U Rusx Afpefu *bottle conveyors and bottle lifter + corrugated box preparation unit Lantech can be discussed for additional cost.

Condition: good (used), axle configuration: 3 axles, first registration: 09/2008, suspension: air, color: black, Year of construction: 2008, Equipment: ABS, = Additional Options and Equipment = - Air suspension = Notes = M&V Euro 902K 3-axle trailer, container chassis, extendable for 2x 20ft/30ft/40ft, German registration!!! = Further Information = Axle configuration Axle brand: SAF Suspension: Air suspension Rear axle 1: Tire tread left: 30%; Tire tread right: 30% Rear axle 2: Tire tread left: 50%; Tire tread right: 50% Rear axle 3: Tire tread left: 30%; Tire tread right: 30% Weights Unladen weight: 5,690 kg Payload: 33,310 kg Gross vehicle weight: 39,000 kg Functional Extendable body: Yes Fjdpfx Aoxyubyofpsfu Condition Technical condition: good Visual condition: good Further information Please contact Gerrit Haverhoek for more information.

Condition: good (used), For fully automatic assembly of frame parts. Outer frame dimensions: min. 120 x 120 mm max. 700 x 2.500 mm Ffedpfx Afjdhdg Ispou

Condition: used, Year of construction: 2000, To the fully automatic Assembly of frame parts. Frame dimensions: min. 120 x 120 mm 1050 x 2,500 mm 2 heating Rails Ffsdpfx Afjd H Irfjpou

Condition: used, 2 Cast iron V supports Fsdsxx T Amjpfx Afpofu Width: 1400 mm Height: 1370 mm Base depth: 750 mm Slot width: 200 mm V width: 940 mm V depth: 430 mm Total height under sole: 1470 mm Weight: 2,3 T / unit Ideal for positioning large rotors

Condition: new, TC 165 x 750V Illustration shows MIOTAL® TC 180 x 1000 Center distance: 750 mm Center height: 165 mm Swing diameter over bed: Ø 330 mm Bed width: 190 mm Fedoir Igwopfx Afpsfu Cross slide travel: 160 mm Top slide travel: 90 mm Spindle connection: DIN 55029 (Camlock) D 1 - 4 Spindle bore: Ø 40 mm Max. Chuck diameter: Ø 200 mm Spindle speed, infinitely variable: 30 - 2000 1/min Mechanical feed stages: 3 Motor power: 2.2 kW Longitudinal feeds Z: (40) 0.044 - 1.96 mm/rev Face feeds X: (40) 0.022 - 0.98 mm/rev Metric thread: (32) 0.4 - 7.0 mm Thread inch: (32) 4 - 56 Gg/inch Thread module: (32) 0.4 - 7.0 Diametral thread: (32) 7.5 - 112 Quill diameter tailstock: Ø 40 mm Inner taper of quill tailstock: MK 3 Quill stroke: 100 mm Lateral adjustment: ± 10 mm Weight, approx.: 650 kg Features: - Acceptance protocol according to DIN - Precise, hardened and ground guides - Robust headstock with recirculating oil lubrication, precision bearing-mounted spindle, hardened and ground gears for long-lasting quality - Electromagnetic spindle brake (TC), frequency converter with electric braking device (V models) - Torsion-resistant machine beds made of MEEHANITE quality casting, stress-free annealed and multi-ribbed for extremely smooth running - Electrical equipment from SIEMENS/SCHNEIDER - Overload protection for feed gearbox - Pulse button for main spindle - CE / IEC as well as German documentation and German service Basic equipment (standard accessories): - Machine stand with splash guard rear panel - 3-jaw lathe chuck - 4-fold steel holder - Foot pedal with mech. brake device - Coolant device - Chuck guard and spindle cover in accordance with European safety standards CE - 1 Fixed center point for main spindle - 1 Fixed center point MK3 - 1 Test report - Safety devices and electrical equipment according to CE - Reducing sleeve for main spindle Operating tool Available options for this lathe: - 3-axis digital readout - Quick-change holder system Multifix also available as a gearbox version

Condition: new, Year of construction: 2025, operating hours: 1 h, Technical information Chassis type: articulated Make of engine: Electrisch Top speed: 20 km/h Functional Lifting capacity: 1.100 kg CE mark: yes Fjdpfx Afspitbbspofu Condition General condition: very good Technical condition: very good Visual appearance: very good Other information Front tyres / undercarriage remaining: 100 Rear tyres remaining : 100 Delivery terms: EXW Additional information Please contact Robert Vijn for more information

Condition: new, Year of construction: 2025, operating hours: 1 h, Chassis type: articulated Fsdpfx Afokhml Ijpsfu Make of engine: Electric Lifting capacity: 400 kg Bucket capacity: 0,2 m³ Top speed: 18 km/h Front tyres / undercarriage remaining: 100 Rear tyres remaining : 100 Transport dimensions (LxWxH): 326x109x2185 Please contact Robert Vijn for more information

Condition: new, Year of construction: 2021, 585/600 mm 465/480 mm 385/400 mm 900x500 mm Fjdpfx Afewp Tiwspsfu 1200x250 mm 40-2000 U/min SK 40

Condition: new, Year of construction: 2023, 600 mm Fjdpfowp Tm Aex Afpefu 500 mm 400 mm 1000x500 mm 1200x250 mm 40-3200 U/min DIN 2080 ISO 40

Year of construction: 1997, condition: repair required (used), Mortising machines Maka Db-6 v Second hand 1977 Make: Maka Model: Ffodpfxefd Rxqo Afpsu Db-6 v Description: VERTICAL MORTISER MAKA DB-6 V Year of construction: 1977 Machine condition: very good afer repairs capital Offertype: used machine offer Location: Poland Technical data: AFTER REPARIRS VERY IMPORTENT VERTICAL Year: 1977

Year of construction: 2025, condition: new, lifter boy for loading sheet metal on laser machines easy operation ( vacuum pump are in the control unit) no cable by loading laser machine vacuum pomp work on battery and they are in operation unit 300, 600 and 800 kg save operation 1 spare Battery include battery loader include monting manual. Ffodpjm E Im Eofx Afpeu CE complete pack in wooden transport box we can deliver till 6 meter long scheetmetal.

Condition: new, Year of construction: 2024, lifter boy for loading sheet metal on laser machines easy operation ( vacuum pump are in the control unit) no cable by loading laser machine vacuum pomp work on battery and they are in operation unit battery loader included. 300, 600 and 800 kg save operation include battery loader include mounting manual. Fsdpfelcd Sdex Afpsfu CE complete pack in wooden transport box we can deliver till 6 meter long scheetmetal.

Condition: new, Year of construction: 2025, functionality: fully functional, lifter boy for loading sheet metal on laser machines easy operation ( vacuum pump are in the control unit) Fjdpfxovc U Shs Afpefu no cable by loading laser machine continu vacuum protection vacuum pomp work on battery and they are in operation unit battery loader included. 300, 600 and 800 kg save operation include battery loader ( buster type ) include mounting manual. CE complete pack in wooden transport box we can deliver till 6 meter long scheetmetal.

Condition: used, bore capacity in steel (diameter) 35 mm throat 320 mm bore stroke 160 mm spindle turning speed range 65 - 460 / 460 - 3250 U/min no. of turning speeds stufenlos Stufen feeds 0,1 - 0,2 - 0,3 mm/U spindle taper MK 4 table surface area 500 x 420 mm base plate 650 x 450 mm Distance spindle/table max. 500 mm column diameter 120 mm distance spindle/base plate 1100 mm Total height 2200 mm voltage 400 V / 50 Hz drive motor 1,5 kW coolant pump drive 0,2 kW total power requirement 1,7 kW weight of the machine ca. 0,550 t dimensions of the machine ca. 0,6 x 0,8 x 2,2 m Industrial, gear-driven drilling machine, with coolant device, adjustable drilling depth, left-hand and right-hand rotation of the spindle, motor with 2 speeds, work light, table can be rotated and tilted, Ffedpfxswyd Sks Afpsu