Used V-Tines for sale (35,023)

Condition: new, Year of construction: 2021, functionality: fully functional, V-motion classic vacuum lifting device with slewing jibLoad capacity: 250 kg Overall height: 3.8 m Lower edge of jib: approx. 3 m Reach / Outreach: 4 m Slewing range: 250° Suitable for horizontal and vertical material handling. Excellent for commercially available flat sheets and panels (MDF from 8 mm thickness). Dcsdpfxoy R D Hio Aptel A pneumatic tilting device supports the operation of the unit. The tilting range is within 90°. The vacuum is generated by an ejector using pneumatics. Details: - Lifting speed: chain hoist, 0–10 m/min - Lifting height: 2 m - Chain length: 3.5 m - Operating pressure: 7 bar (filtered compressed air required) - Air consumption: 11 Nl/s

Year of construction: 1994, condition: good (used), Sheetmetalworking tooling Multi V Lower tooling 75 x 75 x 3100 mm MACH-ID 4131 Type: Multi V Lower tooling 75 x 75 x 3100 mm Dcjdozc Iztepfx Aptol Year: 1994 Total length:3100mm Total hight:75mm Length: 3100mm Width: 75mm Height: 75mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Sheetmetalworking tooling Multi V Lower tooling 140 x 140 x 6000 mm Total length:6000mm Total hight:140 x 140mm V-size: 8 - 10 - 16 - 20 - 24 - 30 - 40mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Dodpszc Izgofx Aptecl

Condition: good (used), Sheetmetalworking tooling Multi V Lower tooling 100 x 100 x 5400 mm Total length:3100mm Total hight:75mm V-size: 10 - 20 - 24 - 30 - 40mm Dcsdpfjzc Iypox Aptsl Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Manufacturer: Bosch Rexroth Product series: IndraControl V Type: VDP40.3BIN-D1-NN-MX Part number: R911171444 Device type: Operator panel / HMI Display size: 15 inch TFT Resolution: 1024 × 768 pixels Membrane keypad: Integrated USB interfaces: Available Dsdpfxjzcgv No Aptocl Supply voltage: 24 V DC Degree of protection (front): IP65 Degree of protection (device): IP20 Bosch Rexroth IndraControl V operator panel VDP40.3BIN-D1-NN-MX – R911171444 Used, functionality not tested.

Condition: ready for operation (used), Heidenhain / Grundig VIC30 AES 2 / IN0853694 control board SN:7171033 Grundig No. 0.881.952-0 VIC30 from Gildemeister CTX 600, used, minor signs of wear, 100% fully functional, delivery as per photos. Dcsdjx Dwqxspfx Aptel

Condition: ready for operation (used), Motorola M68VECPU CPU - board Serial number: G662, used, in good condition, 100% functional, scope of delivery as per photos. Dcjdpex Et Niofx Aptol

Condition: ready for operation (used), Heidenhain / Gildemeister VAP4 AES 2 / IN9853603 control board SN:6135032 from Gildemeister CXT 600, used, minor signs of wear, 100% functional, scope of delivery as shown in the photos. Dodpfsx Erriox Aptscl

Condition: ready for operation (used), Year of construction: 2010, RHV-C&V GmbH & Co. KG glass jar capper type: LW560 Djdpfx Apeyxgxwstjcl serial number: 10172/4184 year of construction: 09/2010 stainless steel conveyor belt, belt width: 120 mm

Year of construction: 2007, condition: ready for operation (used), functionality: fully functional, Professional BELIMED MST-V 6-6-12 VS2 steam sterilizer from an ongoing food production facility for sale. The unit was originally developed for medical applications and is now successfully used for sterilizing beverage bottles in a smoothie production facility. Up to 350 bottles are sterilized per batch on specially adapted trolleys. The autoclave features a modern Siemens control system with a touchscreen, programmable sterilization cycles, and stored programs for sterilizations above 121 °C. Programs are programmable, and the display language can be selected. A recent test report from an independent food institute with FDA-compliant temperature penetration measurement in the product is particularly noteworthy. The unit is in very good technical condition. In recent years, the sterilization door, pumps, and motors have been replaced. The autoclave is currently in daily use and can be inspected under real production conditions until August 2026. Further details: Pass-through design with door at the front and rear Siemens control system with color touchscreen Display currently set to Polish; other languages possible Programmable sterilization cycles Stored programs > 121 °C FDA-compliant temperature penetration measurement available Test report from an independent food institute available New sterilization door Pumps replaced Motors replaced Regularly maintained 1 transport trolley included Additional transport trolleys available Currently used in a food production facility Inspection possible during ongoing operation Available from September 1, 2026 Location: 58-508 Siedlęcin, Poland Price: €39,900 (negotiable) Dcsdpfjzccqiex Aptjl

Condition: new, Year of construction: 2021, V-hold 4-sided, 5-spindle planer, model VH-M 521 - width from 25 to 230 mm - height from 8 to 160 mm Djdpfxshq Rp Hs Aptjcl 1st from the bottom - 7.5 kW 2nd from the right -7.5 kW 3rd from the left -7.5 kW 4. from the top -11 kW 5. from the bottom - 7.5 kW - 5.5 kW feed from 6 to 36 m / min - revolutions 6500 / min - diameter of the spindles 40 mm - feed for short, opposite the right spindle - pressure in front of and behind the upper spindle. - manual table lubrication pump - machine weight 3100 kg In stock

Condition: refurbished (used), battery capacity: 930 Ah, battery voltage: 48 V, total height: 784 mm, total length: 835 mm, total width: 742 mm, Tested forklift battery for your truck – 48V 6PZS 930AH – DIN A + 1 year warranty + incl. Aquamatic system + incl. end discharge lead & REMA 320 connector (other connectors available upon request) Dcedoy Rntyjpfx Aptsl + Capacity: min. 90–100% (C5 capacity protocol is included upon delivery) + Year of manufacture: 2024 Dimensions: Length 984 mm Width 630 mm Height 650 mm Weight: approx. 1,050 kg Suitable for the following models and more: Linde E 18 – 322-00 Linde E 18 – 386-02 – side battery change Linde E 18 Z – 322-00 Linde E 20 PHL – 335-00 Linde E 20 PHL – 386-00 Linde E 20 PHL – 386-02 Linde V – 5213-00 Linde V – 5213-01 Linde V MODULAR – 5213-00 Linde V MODULAR – 5214-00 Toyota/BT RR-B 8 Common battery sizes available on request. Transport possible.

Condition: refurbished (used), battery capacity: 465 Ah, battery voltage: 48 V, total height: 627 mm, total length: 1,030 mm, total width: 349 mm, Tested forklift battery for your truck – 48V 3PZS 465Ah – DIN A + 1-year warranty + Including Aquamatik (central water filling system) + Including end discharge cable & REMA 320 connector (other connectors can be fitted on request) + Capacity: min. 90–100% (C5 capacity report provided upon delivery) + Year of delivery: 2024 Dimensions: Length: 835 mm Dedpfx Asy Rnlpoptscl Width: 413 mm Height: 784 mm Weight: approx. 760 kg Suitable for the following models and others: Linde E 18 Z - 322-00 Linde V MODULAR - 5213-00 Still EK 11 Jungheinrich EKS 210 Jungheinrich KMS 100 Toyota 6FBRE14 Paletrans PR17 Common battery sizes available, enquiries welcome. Transport available.

Condition: refurbished (used), battery capacity: 620 Ah, battery voltage: 48 V, total height: 784 mm, total length: 1,035 mm, total width: 443 mm, Tested forklift battery for your forklift – 48V 4PZS 620Ah – DIN B + 1 year warranty + Includes Aquamatic system + Includes end discharge cables & REMA 320 connector (other connectors can be fitted on request) + Capacity: min. 90–100% (C5 capacity protocol will be provided upon delivery) + Year of delivery: 2024 Dimensions: Length: 1,035 mm Width: 443 mm Height: 784 mm Weight: approx. 960 kg Suitable for the following models and others: Linde A (1120) - 52-00 Linde K - 5231-00 Linde K - 5231-00 - side extraction Linde K 10 Linde K 10 - vertical extraction Linde K 12 Linde R 10 N - 1120-00 Linde R 10 N - 1120-00 - front extraction Linde R 12 N - 1120-00 Linde R 12 N - 1120-00 - front extraction Linde R 12 N - 136-00 Linde R 14 - 1120-00 Linde R 14 - 376-00 Linde R 14 N - 1120-00 - front extraction Linde R 14 N - 1120-00 - vertical extraction Linde R 14 S N ACTIVE - 115-12 Linde R 14 SN - 115-08 Linde R 14 SN - 115-08 - vertical extraction Linde R 16 AS 1140 - 1120-00 Linde R 16 N - 1120-00 Linde R 16 N - 1120-00 - front extraction Linde R 16 N - 113-00 Linde R 16 N - 115-00 Linde R 16 N - 115- - vertical extraction Linde R 16 N HD - 1120-00 - front extraction Linde R 16 SN - 115-08 Linde R 20 - 1120-00 Dodoy Rnizepfx Aptscl Linde R 20 N - 1120-00 - front extraction Linde R 20 N - 113-00 Linde R 20 SN - 115-08 Linde V 10 E - 14 - vertical extraction Linde V 10 E Linde V 12 E - vertical extraction Linde V 12 E - vertical extraction Still EK 11 Still FM 14 N Jungheinrich EKS 312 Jungheinrich ET 214 Jungheinrich ET 216 Jungheinrich ETM 214 Jungheinrich ETV Jungheinrich ETV 112 Jungheinrich ETV 216 Jungheinrich ETV Q Jungheinrich ETV Q 20 Jungheinrich ETV Q 25 Crown ESR 5220 Crown ESR 5220-1.4 Crown ESR 5220-1.6 Caterpillar NR16N2C Hyster K1.0H Steinbock-Boss WR 16 Other common battery sizes available on request. Transport possible.

Condition: good (used), • Miter cut length (mm): 100 • Adhesive: Hot melt adhesive • Automatic assembly: of frame components Dcjdpfx Asm Sfneptsl

Condition: used, Year of construction: 2000, For fully automated assembly of frame components. Frame outer dimensions: min. 120 x 120 mm max. 1050 x 2,500 mm Dcodpod H Irfjfx Aptjl 2 heating rails

Condition: good (used), For fully automatic assembly of frame components. Dcjdpfx Asdhdg Ieptol Frame outer dimensions: min. 120 x 120 mm max. 700 x 2,500 mm

Condition: new, Year of construction: 2026, functionality: fully functional, lifter boy for loading sheet metal on laser machines easy operation ( vacuum pump are in the control unit) no cable around the vacuum lifter by loading laser machine continu vacuum protection vacuum pomp work on battery and they are in operation unit battery loader included. 300, 600 and 800 kg save operation include battery loader ( buster type ) include mounting manual. CE complete pack in wooden transport box we can deliver till 6 meter long scheetmetal. price is for 300 kg lifter 600 kg lifter plus 300 euro 800 kg lifter plus 600 euro =>direct from stock. Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Dcjdpsytcnvjfx Aptjl Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 17405, travel distance X-axis: 550 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 10,000 kg, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 240, No minimum price – guaranteed sale to the highest bidder! Bidding obligates the winner to pick up the machine between September 21st and October 1st! TECHNICAL DETAILS Travel range, X-axis: 550 mm Travel range, Y-axis: 410 mm Travel range, Z-axis: 450 mm Travel range, B-axis: -110 to +110° Travel range, C-axis: 360° Distance from pallet surface to spindle center: -20 to 430 mm Distance from B-axis center to spindle center: -40 to 410 mm Distance from B-axis center to spindle center: -20 mm Distance from pallet center to Z zero point: 265 mm Distance from pallet center to Y zero point: 180 mm Pallet Work area on the pallet: Ø 130 mm Pallet load capacity: 40 kg Max. workpiece size: Ø 250 × 250 mm Pallet mounting surface: 4 × M12 × 1.75 Distance from pallet bottom to pallet surface: 970 mm Pallet indexing, B/C-axis: 0.001° / 0.001° Pallet change time, B-axis: 1.2 s/90° Pallet change time, C-axis: 0.9 s/90° Dcodpfx Apszqunhjtel Pallet change time, C-axis: 1.2 s/180° Pallet change time, C-axis: 1.4 s/270° Pallet torque, B-axis: 1,070 Nm Pallet torque, C-axis: 192 Nm Pallet braking torque, B-axis: 1,112 Nm Pallet braking torque, C-axis: 500 Nm Spindle Spindle speed: 50 to 15,000 rpm Spindle speed change: 5-digit direct S-command Tool interface: SK 40 Spindle taper: 7/24, Taper No. 40 Spindle bearing inner diameter: 70 mm Max. spindle torque: 65.1 Nm at 1,100 min⁻¹ Spindle air blow: Standard Spindle orientation: Standard Tool clamping force: 7.0 kN Tool Changer Tool magazine capacity: 240 positions Tool shank: JIS B 6339, tool shank 40T Pull stud type: JIS B 6339, pull stud 40P Max. tool diameter: 80 mm Max. tool diameter with free auxiliary stations: 150 mm Max. tool length: 300 mm Max. tool weight: 10 kg Tool selection: Fixed address system Tool change arm: W-gripper type Feed Rates Rapid traverse rate, X/Y/Z-axis: 50 m/min Rapid traverse rate, B-axis: 30 min⁻¹ Rapid traverse rate, C-axis: 50 min⁻¹ Feed rate, X/Y/Z-axis: 1 to 50 m/min Feed rate, B-axis: 30 min⁻¹ Feed rate, C-axis: 50 min⁻¹ Rapid traverse acceleration, X/Y/Z-axis: 0.6 G Rapid traverse acceleration, B/C-axis: 2,500 / 2,000 °/s² Max. acceleration during cutting feed, X/Y/Z-axis: 0.4 G Max. acceleration during cutting feed, B/C-axis: 2,000 / 4,000 °/s² Tipping feed rate, X/Y/Z-axis: 0 to 4000 mm/min Tipping feed rate, B/C-axis: 0 to 11.11 min⁻¹ Min. movement increment, X/Y/Z-axis: 0.001 mm Min. movement increment, B/C-axis: 0.001° MACHINE DETAILS Control: MATSUURA G-TECH 840 DI Serial number: 350536 Electrical Connection Values Rated apparent power: 36 kVA Input voltage: 415 V Input frequency: 50 Hz Input current: 50 A Dimensions and Weight Overall length: 6,000 mm Overall width: 5,000 mm Overall height: 3,500 mm Overall weight: 15,000 kg EQUIPMENT - Chip conveyor - Coolant system - Tool holders on the tool changer External Reference: Hanon - Lot 1

Condition: new, V13.5mm for 1-2.5mm bending V38mm for 3-6mm bending Dedpfx Apjldc U Rjtocl

Condition: new, press brake die Multi-V dies Dodpfx Apoip Dayjtecl

Condition: used, Year of construction: 2014, CNC lathe, 2 axes, Victor V-turn A20 (SV), Taiwan Year of manufacture: 2014 Control system: Fanuc OiTD with Manual Guide Chuck diameter: 210mm Spindle bore: 52mm Tool turret: 12 positions, VDI30 Turning length: 600mm Dsdpfxozhk Uxo Aptecl Turning diameter: 390mm Maximum spindle speed: 5000 rpm Measuring probe: Renishaw Tailstock: MT4 Interface for bar feeder Chip conveyor Coolant tank with pumps Documentation

Condition: used, Year of construction: 1997, functionality: fully functional, Weima WL10/45 V-ROTOR shredder Dedpfxozxpyho Aptscl Rotor length: 1000 mm Number of knives: 24 Rotor speed: approx. 90 rpm Rotor diameter: 368 mm Number of screens with 20 mm diameter holes Main motor power: 45 kW Hydraulic pump motor power: 0.75 kW Technical documentation and CE certificate included Machine dimensions: 240 x 178 x 173 cm (H) Year of manufacture: 1997

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, travel distance X-axis: 1,050 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 460 mm, feed length X-axis: 1,050 mm, feed length Y-axis: 560 mm, feed length Z-axis: 460 mm, feed rate X-axis: 32 m/min, feed rate Y-axis: 32 m/min, feed rate Z-axis: 32 m/min, total height: 2,746 mm, total length: 2,510 mm, total width: 3,100 mm, table width: 560 mm, table length: 1,300 mm, overall weight: 7,500 kg, Equipment: chip conveyor, documentation/manual, OKUMA GENOS 560R-V 4-axis vertical machining center, CNC OSP-P300M-R, Series 0712-100478, including machining tools, vise, collet set, and programming software. The equipment was purchased new in Romania from the manufacturer's representative. It has been used very little in the last 2 years, probably 25-50 hours. Dcedezy Etmepfx Aptel

Condition: used, Refrigerant Condenser, Liquid Cooler, Güntner Cooler, V-block Cooler, Industrial Radiator, Used Machine Manufacturer: Güntner Model / Type: GFD 080.1D/2x4-MS1D/4P.E Overall dimensions: 5404 x 2400 x 2850 mm Coolant: Ethylene glycol 35 Vol. % Weight: 2694 kg Cooling capacity: 331.7 kW Number of fans: 8 pcs Fan diameter: 800 mm Dsdpfezkynyex Aptecl