Used Varnish Dryer for sale (1,855)

Condition: excellent (used), Year of construction: 2012, operating hours: 350 h, functionality: fully functional, machine/vehicle number: R-3176, overall weight: 5,500 kg, total width: 1,400 mm, total length: 7,000 mm, temperature: 200 °C, power: 6 kW (8.16 HP), type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, Equipment: documentation/manual, For sale is a Binder DRYON DRVF 1400×7 fluidized bed/vibrating dryer for wood chips, compost, biomass, wood shavings, and comparable bulk materials. The system was used exclusively for testing purposes and has only approximately 300–400 operating hours. It is in good condition and fully functional. Key data: (The system has previously been used for steam drying with superheated steam at approximately 200 °C. Conversion to other drying media, such as air or flue gas, is possible in principle with appropriate modifications.) - Dryer width: approx. 1,400 mm - Overall length: approx. 7,000 mm - Input capacity: approx. 2,000 kg/h wet (designed for green waste) - Output capacity: approx. 1,200 kg/h dry (designed for green waste) - Water evaporation: approx. 667 kg/h (designed for green waste) - Output moisture content: ≤ 10% (designed for green waste) - Installed electrical power: approx. 6 kW - Weight: approx. 5,500 kg Upon request, additional components for a complete drying unit can be purchased. These include a filter system, a high-performance radial fan, and the associated drive motor. (see planning drawing) Filter system: NESTRO Lufttechnik GmbH, Type Jet 9525, year of manufacture 2013, factory number FA169096, filter area 282.6 m², max. compressed air 6.0 bar, category EK004182, weight approx. 8,000 kg. Fan / drive motor: Hodpfozg Dx Usx Airew High-performance radial fan Type HRV28-450 with drive motor VEM motors GmbH, Type IE2-W21R 315MX2, year of manufacture 02/2013, motor number 180022/0001 H, power 160 kW / 218 HP, voltage 400 V, current 274 A, speed 2,973 min⁻¹, frequency 50 Hz, protection class IP55, insulation class 155, weight approx. 955 kg.

Year of construction: 2006, condition: good (used), Configuration • Unwinder • Register Control System • Flexo Unit (Ink / Varnish application) • Laminating / Cold Foil Unit • Die Cutting Unit • GEW UV Dryer • Slitting Unit • Rewinder _____ Machine Description The ABG Digicon 1 is designed as a modular finishing solution for digital and flexographic label production. The installed flexo unit allows varnish or spot colour application. The laminating / cold foil module enables added-value embellishment. The die-cutting and slitting units ensure precise finishing and roll conversion. The semi-rotary functionality provides cost-efficient short-run flexibility, while full-rotary mode enables higher productivity. _____ Hodsynkwnepfx Airow

Condition: excellent (used), Year of construction: 2014, PROD. PARKER HIROSS TYPE ATT260 S/N 398616590001 YEAR 2014 POWER (kW) 13.5 Hjdpfx Aiey Twahsrjw CAPACITY (m3/min) 26 PRESSURE (bar) 16 HOURS (RUNNING/TOTAL) INVERTER BUILT-IN DRYER EXCHANGER COOLED (AIR/WATER) ON TANK DOCUMENTS YES CONNECTION NEW/USED USED

Condition: used, Technical specifications: Capacity: 3 m3 Integrated pump Shelf length: 3000 mm Shelf width: 1100 mm Dimensions: Hodpfxjzabk As Airjw Height: 2700 mm Width: 2500 mm Length: 4700 mm

Condition: good (used), Year of construction: 2017, ESC Screen Printing System 1100-2C/IR with IR Dryer Manufacturer: ESC – Europa-Siebdruck-Centrum GmbH & Co. KG Hedpfsyrm Hyex Airjw Model designation according to nameplates: PAJD 1100-2C/IR and Perfection 1100 2C/IR Year of manufacture according to nameplates: 2016 and 2017 Machine/Factory numbers: 9960-14-1065 / 11661 Electrical connection: 400 V, 50 Hz Rated current: 120 A (nameplate PAJD) Rated power: 76 kW (nameplate Perfection) Protection class: IP40 Belt type: IR temperature tunnel with conveyor belt (width as per series: 1100 mm) Assembly: IR drying unit for screen printing or coating processes Design: Enclosed safety housing with access doors Application area: Drying/cure of printed or coated components Location: Schierling Inspection possible by appointment.

Condition: used, Year of construction: 2014, operating hours: 53,000 h, machine/vehicle number: APF 194907, pressure (max.): 7.5 bar, rotational speed (max.): 1,485 rpm, TECHNICAL DETAILS Hedpsy Ia R Sofx Airew Maximum operating pressure: 7.5 bar Input power: 355 kW Shaft speed: 1,485 rpm MACHINE DETAILS Operating hours: 53,000 h EQUIPMENT Atlas Copco air dryer, model: MD1000 W CE Maximum operating pressure: 10.5 bar Year of manufacture: 2014

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, power: 50 kW (67.98 HP), input voltage: 400 V, inner dimension length: 9,300 mm, inner dimension width: 220 mm, inner dimension height: 220 mm, overall weight: 11,000 kg, control type: NC control, fuel type: electric, Equipment: CE marking, documentation/manual, in zeer goede staat hoogfrequent vacuüm droger capaciteit 12,5 tot 13 m3 vermogen HF output 50 kw bij een input van 70 Eva door te drogen onder vacuüm verlaagt het kookpunt van water vanaf 60 graden Hodpoy Dr N Sofx Airjw wat sneller drogen op lagere temperaturen mogelijk maakt

Condition: good (used), functionality: fully functional, working width: 500 mm, total width: 1,100 mm, total length: 2,250 mm, total height: 1,400 mm, Water-cooled LED-UV dryer in operation; the machine is equipped with a control system allowing speed adjustment. It features two powerful water-cooled LED lamps for immediate surface drying. Hedpfsy Exz Rox Airew

Condition: like new (used), Year of construction: 2018, Refrigerated Dryer AIRPRESS APX 24 Capacity: 2.4 m³/min, Year of manufacture: 2018 Hsdpfxoyy Ulzs Airjw The dryer is fully operational.

Condition: new, Year of construction: 2026, With the ERBA Granulate Dryer EVK 500, workpieces can be easily separated from the granulate using the integrated screening unit. The dryer features outstanding drying performance, a direct heating system, and digital temperature control. The working container is fully coated internally with polyurethane. The EVK 500 can be integrated into production lines with other machines. Technical specifications: - Gross volume: 500 L - Vibration motor power: 4.0 kW - Heating power: 4.8 kW - Speed: 1,400 rpm - Inner drum diameter: 1,440 mm As an experienced partner, we offer comprehensive expertise in the field of vibratory finishing. Together with you, we develop efficient solutions for optimal process results. All prices are net plus applicable VAT and shipping costs. The images displayed may show the machine with optional accessories, which are available at additional cost. Hsdpfx Ajyq N Dfoirow If you are interested, we look forward to your inquiry. We will be happy to provide you with non-binding advice. The European Commission provides a platform for online dispute resolution (ODR platform). This listing is for informational purposes as an online representation of our products. All contract negotiations are conducted via telecommunication (e-mail, telephone, messaging portal). In the first step, we will provide you with a non-binding offer, which will also include our general terms and conditions (with legal notice) and information on your right of withdrawal, prior to any purchase or contract conclusion.

Condition: good (used), Drying oven, drying cabinet, electrode oven, chamber dryer oven, preheating oven, electrode re-drying, electrode cabinet, electrode heat container Hedpfxsyuut He Airow -Drying oven: with isolation transformer -Type: ES 2 -Technical data: unfortunately no longer legible -Usable space: Ø 100 x 430 mm -Transport dimensions: 520/230/H560 mm -Weight: 14 kg

Condition: used, Year of construction: 2006, functionality: fully functional, power: 6 kW (8.16 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, inner dimension length: 9,150 mm, inner dimension width: 1,900 mm, inner dimension height: 3,000 mm, number of chambers: 2, Drying chamber with trolleys on rails 2 trolleys dimensions: 2x 1900*3000*9150 Hjdpfx Aoy Sbuteirsw 2x 3kW fans Automatically controlled with adjustable drying programs

Condition: excellent (used), Year of construction: 2008, Refrigerated dryer Manufacturer: Kaeser Hodpfoy Sgh Eex Airow Model: TE 121 Year of manufacture: 2008 Volume flow: max. 12.7 m³/h

Condition: good (used), Year of construction: 2002, machine/vehicle number: 2344, functionality: fully functional, power: 6 kW (8.16 HP), input voltage: 400 V, total length: 800 mm, total width: 600 mm, total height: 1,400 mm, overall weight: 100 kg, For sale is a hot air container dryer, model CKT 70, from the renowned manufacturer Werner Koch Maschinentechnik. This unit is specifically designed for the efficient drying of plastic granulates, and with a heating capacity of 6 kW, it delivers consistent performance to meet industrial requirements. Transport and loading can be arranged across Europe upon request and at an additional cost. All prices are subject to VAT. Inspection is possible by appointment. Please contact us—our team will be happy to assist you. Trade-ins or exchanges are welcome! Machinery Trade PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, AND MORE. Are you in need of a high-quality yet affordable metalworking machine for your production? Or are you looking to sell your equipment? Hedpfoy I Rpfex Airjw For more information or to get in touch, please visit our website.

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 250 h, functionality: fully functional, As-new drying chamber, fully functional, immediately available Hjdjy Ny U Topfx Airow

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, Display model. Like-new condition. We are selling a drying chamber powered by a high-efficiency gas burner, featuring an indirect system (no open flames) for heat exchange. Suitable for all types of wood, including softwood and hardwood, as well as pallets or firewood. Used only occasionally for demonstrations and drying cycle tests, and is 100% functional. TECHNICAL DATA Size: 50 m3 Power supply: Fraccaro 200 kW gas burner Intended use: Pallets Firewood Hardwood Softwood Condition: Like-new Special features: Indirect flame burner for maximum safety Structure materials: Aluminum Steel Rock/GLASS wool Control system: Fully customizable Remote control Hodeyyb Nyspfx Airow Number of fans: 4 Temperature range: 20-75°C

Condition: like new (used), Year of construction: 2024, functionality: fully functional, operating hours: 150 h, power: 90 kW (122.37 HP), fuel type: electric, Equipment: CE marking, documentation/manual, Industrial Heat Treatment Furnace – 17 m³ | 400°C | Siemens PLC | Like New Price: €104,100 (approx. 38M HUF) Location: Hungary High-performance industrial heat treatment furnace in excellent condition, designed for precise and reliable thermal processing across multiple industries. Commissioned in April 2024 – only 150 operating hours. Key Specifications • Chamber volume: 17 m³ • Max temperature: 400°C • Temperature uniformity: ±5°C • Heating power: 90 kW (electric) • Control: Siemens PLC with touchscreen • PID temperature control • Recipe storage & data logging • 8 temperature sensors • Fresh air & exhaust system • Frequency-controlled fans • CO₂ fire suppression system • Dual-side door access Applications • Wood heat treatment (thermowood) • Furniture and parquet production • Composite curing • Coating / paint baking • R&D applications Advantages • Industrial-grade performance • Excellent temperature precision • Energy-efficient insulation Hedpfx Aisy Izkmsrsw • Fully automated operation • High safety standards ✔ Available immediately ✔ Inspection under power possible ✔ Dismantling and loading support available

Condition: used, Year of construction: 2001, Manufacturer : Forberg Model : FT20 Year: 2001 Hedpfezbypyex Airew Type: Paddle dryer Description: The product is dried by blowing hot air through the mechanically suspended (fluidised) product. The humid air and suspended particles rise towards the primary filter. A fan blows the humid air into a three-stage water-cooled coil cooler. The condensate from the dehumidified air is drained from beneath the chamber. An electric heater reheats the cold, dry air, and the air returns to the mixing chamber. Material : stainless steel Nominal capacity: 20 litres Mechanical mixing: two counter-rotating blade shafts Variable speed: yes (see control panel) Forced-air ventilation: 1 cold-air fan and 1 hot-air fan Cooling unit: tube heat exchanger, external source fluid connection, condensate drain. Heating system: 20 kW Temperature and humidity sensor Product sampling Infastaub AJN 024 air filter / dust collector: surface area 2 m² Cleaning filters with compressed air PLC + HMI: Siemens These options are available and are subject to an additional quote Lump breaker for wet granulation. Liquid spraying Dimension : 326 x 97 x 230 cm Operating manual and wiring diagrams Video available when powered on  

Condition: used, Year of construction: 2010, Motan MDE 40 For sale is a compact mobile dry air granule dryer Motan MDE 40. Ideal for side-by-side or on-machine drying of hygroscopic plastic materials. Standard single-phase 230 V power connection makes it easy to install anywhere in the production hall. Manufacturer: Motan Model: MDE 40 Power Supply: 230 V / 50 Hz (1 N PE) Power Consumption: 1.3 kW (6 A) Protection Fuse: 10 A Hjdpfx Aijz Ruw Usrjw

Year of construction: 2020, condition: new, 7 "Touch Panel The large color touch panel looks aesthetically and is comfortable and intuitive to use. You will set all important parameters on it. Hsdpfx Aiofz U Hvsrjw Memory of 20 programs with 10 events It is possible to save up to 20 programs and activate up to 10 consecutive time-temperature events arranged in the heating curve. This is especially needed for more demanding processes. Information on gas / oil consumption The consumption is calculated based on the burner settings. This feature will allow you to estimate the cost of a given cycle, plan consumption and check personnel. Dual-channel recorder of USB cycle parameters Each furnace is equipped with a recorder that records all firing parameters, including two temperature channels - like in an airplane black box, on a USB flash drive. The system also enables the analysis of monthly / daily statements, including media consumption and performance. Each start of heating, opening the door, can be recreated, a few years back. Such a dedicated option is not offered by any manufacturer. It is a system developed from scratch by our programmers Automatic smoke exhaust chimney The chimney can be programmed to open a few minutes before the end of the firing in order to smoke the chamber. It can be remotely controlled from the panel, it does not need to be done mechanically as in most structures. Minute forecast until the end The cycle has started, how long will it end? calculating the heating dynamics, we will count it and show on the display how much longer it will take. To open it, just pull the door. The lock has adjustable pressure of the door, to close it just push it, the lock will catch the door and automatically pull it back. In order to minimize the effect of heating the hall when opening the door, a hood is installed above the door to remove some of the heat to other places. The MTS system was created to provide a real reading of the temperature of the furnace chamber. Standard measurement is based on one temperature measurement which is often wrong.MTS is a system of many sensors located in the outermost places of the chamber. The multi-zone heating system ensures a firing quality that has been so far unique. Each normal oven has only one heating zone and only one temperature measurement! The multi zone heat system supports up to 8 independent heating zones in one oven. Each heating zone has as many as 3 temperature sensors! When there are temperature differences between zones, they are automatically equalized! The system helps to combat the problem when elements of different material thicknesses enter the furnace.

Condition: used, The VJ-2638X printer is versatile, suitable for producing a wide range of outdoor and indoor prints such as long-term outdoor posters, billboards, building announcements, signs, banners, backlit signage, POS displays, vehicle graphics, fine art reproduction, and posters. The VJ-2638X is a robust printer featuring proven technology from Japan. It includes a staggered dual head setup with the latest generation 1440 nozzle piezo heads, ensuring extreme print quality and sharpness at all production speeds. The printer incorporates Mutoh Intelligent Interweaving (i²) and DropMaster technology, achieving super high-resolution prints at 22 m²/h (720 x 1080 dpi) and production speeds of 33 and 39 m²/h at 720 x 720 dpi. It produces durable prints on both coated and uncoated substrates with exterior durability up to 3 years. Technical Key Specifications Print Technology: Drop-on-demand Micro Piezo Inkjet Technology Print Heads: 2 (staggered setup) Nozzle Configuration: 180 nozzles x 8 lines Drop Mass Range: 3.6 to 35.2 pl Hodpfx Aioz Sr D Iersw Head Heights: Low: 1.5 mm, Middle: 2.5 mm, High: 4.0 mm Max. Media Width: 2600 mm (102.36”) Max. Print Width: 2590 mm (101.97”) Max. Media Thickness: 0.3 / 1.3 / 2.8 mm Media Drying System: Individually controlled pre-heater, fixer, and dryer (30 - 50 °C) Performance The printer offers various quality and speed settings, with print resolutions ranging from 720 x 1440 dpi to 360 x 720 dpi, and speeds from 12 m²/h to 48 m²/h. Ink Specifications Ink Types: Eco Ultra / UMS Ink Volume: 220 ml, 440 ml & 1000 ml (optional adapter required for 1000 ml pack) Ink Colours: CMYK Ink Consumption: 8 ml/m² (average at 720 dpi, 67% coverage) UV Durability: 3 years outdoor without lamination (lamination required for heavy-duty applications)

Condition: excellent (used), For sale is a Ponndorf PX 15 peristaltic pump equipped with a Lenze geared motor with smooth speed control. This pump is designed for the precise transfer and dosing of liquids, where the medium only comes into contact with the flexible working hose. This solution ensures the safe pumping of aggressive, viscous, and solid-containing substances. The unit is mounted on a sturdy steel base and is sold as a complete set with the geared motor. The visual condition is as shown in the photos – normal signs of use. Hodpfsz Snbcjx Airjw Technical data: Pump manufacturer: Ponndorf Handelsgesellschaft mbH Model: PX 15 Serial number: 3284 Pump type: peristaltic (hose) Geared motor manufacturer: Lenze Gearbox type: 11 712 02 10 Gear ratio: 10:1 Output speed range: 30–166 rpm Torque: 18–32 Nm Motor manufacturer: Hanning Elektro-Werke Motor power: 0.37 kW Supply voltage: 220/380 V Frequency: 50 Hz Protection class: IP54 Country of manufacture: Germany (West Germany) Application: The pump is designed for the transfer and dosing of: adhesives, paints and varnishes, resins, chemicals, detergents, syrups, sludges and sediments, lime milk, suspensions and liquids with fine solid particles. Key advantages: the medium only comes into contact with the working hose, dry running capability, self-priming, gentle pumping without damaging the medium, smooth performance adjustment thanks to the Lenze drive, robust construction made in Germany, easy operation and replacement of the working hose.

Condition: used, Year of construction: 2006, operating hours: 22,000 h, functionality: fully functional, EQUIPMENT FOR TRANSPORT AND MANIPULATION OF RAW MATERIALS The equipment consists of:  Mercedes Actros container truck  Two containers with a volume of 10 to 20 m3 for sawdust Hsdez I Tm Uepfx Airjw  Liebherr bulk loader Equipment condition:  In good condition EQUIPMENT FOR THE PREPARATION OF RAW MATERIALS The equipment consists of:  Waste bin with movable floor - volume approx. 10 m3  Pneumatic transport systems with filter  Conveyor belts and augers  Sawdust dryer with biomass burner  Hammer mill for chopping wood chips with associated equipment  Control cabinets for each piece of equipment Capacity of the complete plant:  About 2 t/h of dried sawdust Equipment condition:  Completely overhauled BRIQUETTING PRESS WITH SAW AND PACKING UNIT Full capacity is 3,5T/h A complete briquetting line consisting of the following:  Briquetting press BP6000 CFN consisting of: o Silos for raw materials o Dosing screw o Oil and press head cooling system o Original press head and cooling line for briquettes with a diameter of 90 mm for hardwood o Manual and automatic control system o Current condition: the press has been 100% serviced and all vital parts of the press have been changed so that it is like new ones o Large quantity of spare parts in stock including spare axle and eccentric  Saw for cutting briquettes BRIDGE o Current condition: the equipment has been fully serviced  Automatic packaging machine for briquettes ROSMAN o Current condition: the equipment has been completely serviced and a new control cabinet has been made

Condition: new, performance: 984 l/min main engine power: 7.5 kW tank capacity: 500 l Hjdozx Sr Hspfx Airjw maximum operating pressure: 10.0 atm integrated refrigerant dryer electronic adjustment of compressor operating parameters soundproofed cabin (only 67 dB) complies with CE standards manufactured in 2025, NEW

Condition: used, Year of construction: 2018, operating hours: 300 h, functionality: fully functional, machine/vehicle number: 3016, film width: 780 mm, filling weight (max.): 20,000 g, filling weight (min.): 1,000 g, product height (min.): 100 mm, RADPAK RM-55AI bulk product packaging line – a complete installation For sale, a complete and fully functional bulk product packaging line for products such as: - pellets, - anthracite coal, - granulated fertilizers, - aggregates, - and other bulk materials. The machine enables the packaging of products into plastic bags weighing from 1 to 20 kg. It supports: - simple bags, - bags with a gusset, - bags with a top handle. The line consists of: - RADPAK RM-55AI packaging machine, - RW-04 weighing dispenser, - RC-50 take-off conveyor, - frame with an operating platform, Hedpfxoz T Ahms Airow - filling hopper with a bucket elevator, - dust extraction system (2 filters), - screw compressor, - compressed air storage tank, - compressed air dryer. Technical data Manufacturer: RADPAK Sp. z o.o., Włocławek Year of manufacture: 2018 Electrical power supply: 3 × 400 V AC + N + PE, 50 Hz Pneumatic power supply: 0.55–0.60 MPa Factory serial numbers: Packaging machine RM-55AI – no. 3016 Weighing dispenser RW-04 – no. 2093 Take-off conveyor RC-50 – no. 3018