Used Veneer Splicer for sale (547)

Condition: excellent (used), Catalog number: 7551 TECHNICAL DATA veneer thickness: 0.4-2 mm clearance width under the frame: 920 mm foot pedal control tabletop dimensions: 1250x340 mm 2 metal pressure rollers air consumption: 6 bar rubber roller, pulling from below 2 smooth metal pull rollers motor: 0.55 kW Cedpfx Aieztwhpszsri dimensions (L/W/H): 1400x550x1500 mm weight: 205 kg – German-made – unpainted – DTR documentation included – very good condition – used stapler Net price: 6900 PLN Net price: 1605 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to exchange rate fluctuations)

Condition: used, Used Machine Features and Technical Specifications: - Working width: 630 mm Csdpo Af I Nnjfx Aizeri - Veneer thickness: approx. 0.4–2 mm - Feed rate: approx. 7 m/min - Table size: approx. 365 x 720 mm - With foot switch Dimensions: approx. 1050 x 630 x 400 mm

Condition: good (used), functionality: fully functional, The machine consists of: 1. Loading conveyor belt for the sheet to be joined - Dimensions: 3200 x 2000 - Power: 2 kW 2. Lifting table - Dimensions: 3200 x 2000 - Capacity: 5000 kg - Power: 4 kW 3. Conveyor belt for loading empty pallets - Dimensions: 3200 x 2000 - Power: 2 kW 4. Empty loader for the sheet to be optimized VTSA 3800 - Length: 3200 - Feeding speed: 55 m/min - Power: 5 kW 5. Roller feeder VTSM 3800 - Length: 3200 - Power: 1.5 kW 6. Angle transmission with rollers and belts KS4 - 5400 - Length: 3200 - Width: 2000 - Power: 2+2 kW 7. Conveyor belt for aligning sheets on the side edge PKP - Length: 3000 - Power: 4 kW 8. Conveyor belt with chains for pinching the sheet - Length: 2000 - Power: 5.5 kW 9. Camera for reading the material to be optimized OK P - Analyzes the sheet and sends the cutting commands (head cut, tail cut, hole cut, etc., according to the parameters set by the operator) - Sheet thickness control unit 10. Pasta cutting unit - Hydraulic control 11. Group for selecting waste material (it is inserted in a belt below) 12. Splicing group with thermo-fuse wire - Number of splicing wires: 6 13. Cutter for cutting the joined sheets to size - Hydraulic control 14. Stacker for unloading the joined sheets Crodpfx Ajvnri Ioizoi - Length: 3200 - Width: 2000 - Power: 3 kW 15. Lift table - Length: 3200 - Width: 2000 - Load: 5000 kg - Power: 4 kW 16. Conveyor belt for unloading pallets - Length: 3200 - Width: 2000 - Power: 2 kW 17. Conveyor belt for loading empty pallets - Length: 3200 - Width: 2000 - Power: 2 kW 18. Evacuation belt for cutting waste - Power: 4 kW 19. Mechanical cutter for shredding waste

Condition: used, Second-hand machine Second-hand veneer splicing machine from Kuper, model FW 1150 Passage width: 1150 mm Feed speed: approx. 10–30 m/min Veneer thicknesses: 0.3–3 mm excluding tables at the front and rear Availability: at short notice Crsdpfx Aozk Nqqeizji Location: Röllbach

Condition: used, Year of construction: 1993, Second-hand machine Crodpfx Aijzk N D Rezsi Year of manufacture: 1993 Bench-top machine The zigzag thread used as the adhesive medium is applied from below Automatic thickness and tolerance compensation for measured veneers Veneer from approx. 120 mm in length, 35 mm in width and a thickness of 0.3–2 mm Electrical connection: 230 V Column reach 700 mm Material feed rate approx. 6 m/min. Weight approx. 54 kg Availability: at short notice Storage location: Flörsheim

Condition: used, Kuper FW 630 Mini The ideal machine for small quantities of veneer, incorporating the technical advantages of all KUPER zigzag gluing machines: Disc cutters with a tolerance compensation mechanism. A KUPER special adhesive thread is used as the adhesive. Codpfjbi I Apjx Aizjri The adhesive thread, which is applied automatically in a zigzag line, guarantees a dense and firm joint connection. During pressing, the adhesive thread is positioned inwards, eliminating the need for subsequent sanding of the adhesive. Technical data: Standard width: 630 mm Veneer thickness: approx. 0.4 - 2.0 mm Feed rate: approx. 7 m/min Operating voltage: 230 V, 50 Hz/60 Hz Total power consumption: 110 VA Space requirement: 1050 x 905 mm = 0.95 m² Overall height: 475 mm Net weight: 95 kg Gross weight: 110 kg Constantly in stock: 10 units of FW 420, FW 630, FW 920.

Condition: good (used), Code: 0493 Brand: KUPER Model: 630 Thread splicer for veneer with base Technical data: Throat depth mm 630 Thickness of veneers 0,4 - 2 mm Feed speed 7 mt/min Crodpfez Ia T Uex Aizoi Volt 220 single-phase Overall dimensions : mm 950 x 500 x 1180 h Weight kg 95

Condition: good (used), Year of construction: 1995, Kuper veneer zig-zag splicer machine, type FW/ 1200-E year of manufacture 1995 S/N 3508 3179 Specific features of the KUPER FW 1200 E: high feed speed of 60 m/min. electronically infinitely variable width of zig-zag pattern glue thread cutting device max. veneer thickness : 3,0 mm min. veneer thickness : 0,3 mm glue thread with hot air heating Compressed air discus for transporting the veneer over the veneer table control via foot pedal feed speed : 35-60m / min Volt: 400 V, 50 Hz Total power 1,35 kW working height 915mm weight approx. : 440 kg Dimension : 2,12m x 0,73m x 1,55m Cedpfehbp Ifex Aizori

Condition: good (used), Code: 0491 Brand: KUPER Cedpfxsz Hw S So Aizsri Model: FW MINI 630 - CE Standard Thread splicer for veneer,for joinery workshops, doors, furniture, veneer, custom-made furniture, panels and various items - CE Standard Technical data Arm mm 630 Veneer thickness mm 0,4 - 2 Feeding 7 mt/min Voltage 220 volts Overall dimensions: mm 850 x 370 x 400 h Weight kg 31

Condition: good (used), Code: 0240 Brand: KUPER Model: FW /J 900 Veneer thread splicer Technical data : Throat depth mm 900 Feed speed mt 15/min Thickness of veneer 0,4 - 2 mm Motor 0,18 Kw Overall dimensions: mm 1350 x 580 x 1600 h Weight kg 300 Codpfx Aeyxmrwoizori

Condition: used, Veneer machine with direct stacking Manufacturer: Fischer & Rückle Type: FZR15 / DAR 12 Year of manufacture: 2006 / 2014 Cross-feeding splicer For highly efficient cross-gluing of parallel-joined veneer strips into endless or component-specific veneer surfaces. The cut or rotary-cut veneers must be pre-glued with PVAc or urea adhesives. This cross-gluer is the most economical alternative to longitudinal gluers for cross-grain applications. Production Approx. 17-20 joining points/min Technical data Veneer strip length (grain direction): 350-1500 mm Veneer strip width (cross-grain direction): 50-500 mm Veneer strip thickness: 0.3-1.5 mm Equipment Feed device for efficient and convenient semi-automatic feeding of veneer strips. Plate automation for component-specific surfaces with pre-sorted components and a pre-selected number of veneer strips. Features - Perfect bonding of cut or rotary-cut veneer of all wood species, even with wavy or rippled veneer - Unique, tried-and-tested horizontal pressing system that results in fully closed, solid glue joints - Solid, robust construction for high durability, reliable and fail-safe operation - Easy operation thanks to screen, clear symbols, separate manometer with direct access, etc. - Liftable pressure bars for quick and easy access to the heating plates for cleaning - Few wear parts, low costs for service and maintenance Cedezuz Hfepfx Aizori Cross cutter For cutting to a pre-set format width (across the grain). The width is determined by two photoelectric cells that are mounted at the required distance from the cutter. Direct stacking device DAR-22 For outputting and stacking the veneer surface directly after splicing. The spliced surfaces are gently outputted and stacked on this compact direct stacking device without mechanical intervention. Min. veneer sheet length (grain direction): 350 mm Veneer sheet width (across the grain): 250 - 1200 mm Max. stack height approx. (small sheets are not perfectly aligned): 500 mm Max. stack width (across the grain) for discharge to the rear end: 1200 mm Note: The technical data and descriptions are a transcript of the original order confirmation. Data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2009, - Veneer strip lengths (fiber direction): 350-1500 mm - Veneer strip widths (cross-fiber direction): 50-500 mm - Veneer surface width (cross-fiber direction): min. 260 mm - Veneer strip thickness: 0.3-1.5 mm Crodpozuz Hlsfx Aizsi Veneer machine with direct stacking Manufacturer: Fischer & Rückle Type: FZR 15 / DAR 22 Year of manufacture: 2009 Cross-feed splicer For the most efficient cross-gluing of parallel-joined veneer strips into endless or component-specific veneer surfaces. The cut or rotary-cut veneers must be pre-glued, using PVAc or urea adhesives. This cross-feed splicer is the most economical alternative to longitudinal splicers for cross-fiber applications. Production Approx. 17-20 joints/min Technical data Veneer strip lengths (fiber direction): 350-1500 mm Veneer strip widths (cross-fiber direction): 50-500 mm Veneer surface width (cross-fiber direction): min. 260 mm Veneer strip thickness: 0.3-1.5 mm Equipment Feeding device for efficient and convenient semi-automatic feeding of veneer strips. Panel automatic for component-specific surfaces with pre-sorted components and a pre-selected number of veneer strips. Features - Perfect bonding of cut or rotary-cut veneer of all wood species, even with wavy or undulating veneer - Unique, tried-and-tested horizontal pressing system that results in completely closed, solid glue joints - Solid, robust construction for a long service life, reliable and fail-safe operation - Easy operation thanks to screen, clear symbols, separate pressure gauge with direct access, etc. - Liftable pressure beams for quick and easy access to the heating plates for cleaning - Few wear parts, low costs for service and maintenance Cross-cutter For cutting to a pre-set format width (across the fiber direction) immediately after splicing. The straight alignment of the veneer must be observed and, if necessary, corrected by pressing a button. When working in endless mode, the required distance to the direct stacking device is set. Direct stacking device DAR-22 For outputting and stacking the veneer surface immediately after splicing or cutting. The spliced surfaces are gently output and stacked without this compact direct stacking device exerting any mechanical forces. Min. veneer sheet lengths (fiber direction): 350* - 1500 mm Veneer sheet widths (across the fiber direction): 260 - 500* - 2200 mm Stack removal from the left, right, or rear Max. stack height: 500 mm *Reliable stack alignment not guaranteed Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: repair required (used), Year of construction: 1969, functionality: limited functionality, machine/vehicle number: 2649, cutting length (max.): 4,200 mm, Equipment: safety light barrier, The machine is largely functional, but the optional “AFTER-CUT” function is impaired. Crodpfxe Agw Hzo Aizoi Service and functional adjustments are required. Includes some replacement blades.

Condition: good (used), Year of construction: 1969, For sale is a veneer press from Ott. The machine is in perfect working condition and can be inspected on site. Crjdpfx Aisymmgiszei Sale is on behalf of a customer. Machine location: Friedeburg area. Machine details: Pressing area: 225 cm x 120 cm Year of manufacture: 1969 Motor power: 12 kW Includes heating Emergency stop cable The machine has been repainted at some point

Condition: ready for operation (used), Year of construction: 2026, functionality: fully functional, pressing force: 70 t, stroke length: 400 mm, workpiece length (max.): 3,000 mm, workpiece width (max.): 1,300 mm, cylinder diameter: 70 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Press drive: Hydraulic Total pressure: 70 t Working pressure: 2 kg/cm² Total stroke: 400 mm Number of working stations: 1 Crsds Af Hn Hopfx Aizei Number of levels: 1 Plate material: Mounted plate Number of cylinders: 6 Cylinder diameter: 70 mm Workpiece length: max. 3,000 mm Workpiece width: max. 1,300 mm Workpiece height: max. 400 mm Heating type: Oil-heated Temperature: max. 120 °C MACHINE DETAILS Main motor power: 2.1 kW Dimensions & Weight Dimensions (L x W x H): 4,000 x 2,100 x 2,050 mm Unladen weight: 4,020 kg Number of transport packages: 1 EQUIPMENT Documentation Heating boiler CE marking CE certificate

Condition: like new (used), Year of construction: 2019, functionality: fully functional, Like-new, very well-maintained veneer saw with planing unit. Maximum cutting length: 3050 mm. Cedj Ahy H Hjpfx Aizjri Equipped with rear support and finger stop.

Condition: good (used), Year of construction: 1980, functionality: fully functional, total length: 2,980 mm, total width: 1,530 mm, total height: 2,100 mm, Equipment: documentation/manual, We are offering this used Joos HP 90 veneer press, manufactured in 1980. Joos HP 90 hydraulic veneer press with electric combination heating plates. For sale is a well-maintained veneer press with the following specifications: - Press area: 2.55m x 1.35m - Height of press chamber: 0.4m - Operating pressure: 355 bar - Overall dimensions: 2.98m x 1.53m x 2.1m - Manufacturer: Joos - Model: HP 90 - Year of manufacture: 1980 - Machine type: Veneer press Csdpfe Agb Nbsx Aizeri - Press area: 255 x 135 If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: ready for operation (used), Year of construction: 1980, Höfer H65S heating plate press Credpfxo Ahyycs Aizji Disassemblable design Heating power with energy-saving mode: 7.8 kW, normal: 15.6 kW Pressing area: 2500 x 1300 mm Operating pressure: max. 65 tons 4 cylinders Space requirement: 2890 x 1460 x 1650 mm Year of manufacture: 1980

Condition: used, total length: 3,500 mm, total width: 1,500 mm, total height: 1,800 mm, Year of manufacture: 2008 Colour: White Empty weight: 1.400 kg - Year: 2008 - CE marking present: Yes Cedpfx Aie Ahyp Eozjri - Serial number: 0040108 - Main motor power [kW]: 1.5 - Press drive: Hydraulic - Max. workpiece length [mm]: 3000 - Max. workpiece width [mm]: 1300 - Total stroke [mm]: 500 - Number of work zones [pcs]: 1500 - Number of levels [pcs]: 1 - Plate material: Steel - Number of cylinders [pcs]: 6 - Cylinder diameter [mm]: 55 - Total pressure [Ton]: 30 - Voltage [V]: 400 - Current consumption [A]: 3.6 - Fuse [A]: 16 - Power [kW]: 75.0 - Transport dimensions: 3500mm x 1500mm x 1800mm (l x w x h) - Transport weight [kg]: 1400kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1961, Used Machine Features and Technical Specifications: Platen size: 2500 x 1300 mm Machine is designed for disassembly Total pressing force: 60 metric tons With 6 pistons, each 60 mm Specific pressing force: 1.85 kg/cm² Plate spacing: 350 mm Crjdpfxezyy Aps Aizsi L x W x H approx. 3230 x 1340 x 1775 mm Availability: immediately Location: Rhineland-Palatinate

Condition: ready for operation (used), Year of construction: 1990, Ott 2513, Heavy-duty Veneer Press 4 cylinders Pressing area: 2500 x 1300 mm Heating: electric Opening and closing: electric Pressing force: 90 tons Year of manufacture: 1990 Price: 6,500.- Csdpfe Ahx Ucex Aizjri

Condition: ready for operation (used), OTT Model JU 2510 Hydraulic veneer press with electric heating plates Under-plunger design Crodpfx Aio Ahytljzsi Central control panel with all operating elements Analog temperature display for both heating plates Press pressure can be adjusted continuously by means of a pressure switch Main switch Two-stage hydraulic pump with automatic switching valve from low to high pressure Safety pull cord Rack-and-pinion compensation Pressing area 2500 x 1100 mm Number of press cylinders 4 Total pressing force 70 t Operating voltage: 3 x 400 V + N, 50 Hz. Total connected load approx. 20.3 kW Space requirement (L x W x H) approx.: 2960 x 1240 mm Weight: approx. 2900 kg

Condition: used, Year of construction: 1970, Used Machine Year of manufacture: 1970 Features and Technical Specifications: - Equipped with gold-anodized ELKOM energy-saving plates - Platen size: 2550 x 1350 mm Crjdpfo Ahr A Ijx Aizji - Total pressing force: 100 metric tons - 4 pressure cylinders, 100 mm in diameter - Opening width: 400 mm - Weight: approx. 4,700 kg The machine does not have a safety pull cord; this can be retrofitted upon request

Condition: ready for operation (used), Year of construction: 1990, Langzauner LZT 90 Pressing area: 2500 x 1300 mm Opening width: 400 mm Number of press cylinders: 6 Total pressing force: 90 t Operating voltage: 3 x 400 V + N, 50 Hz Total connected load: approx. 20.0 kW Space requirement (L x W x H): approx. 3000 x 1500 x 1950 mm Weight: approx. 3800 kg Hydraulic heating plate press with bottom cylinder design Pressing pressure can be continuously adjusted by means of a pressure control unit Two-stage hydraulic pump with automatic changeover valve from low to high pressure Central control panel at the front Crodpfxj Ahyvvj Aizji Rack-and-pinion compensation for uniform closing Safety pull cord Opening automation Stroke limitation

Condition: used, Year of construction: 2019, LANGZAUNER LZT 70 – hydraulic veneer press, manufactured in November 2019. Csdpfx Ae Ahzqwoizsri - Four press cylinders - Pressing force: 70 t according to the manufacturer's brochure - Press plate size: 2,500 × 1,300 mm according to the manufacturer's brochure for LZT 70 - Electric plate heating - Connection: 3 × 400 V + N + PE, 50 Hz - Connected load: 19.3 kW according to the nameplate Collection possible from December 15, 2026, at the latest by February 28, 2027. Inspection by appointment. Disassembly, loading, and transport upon agreement. Price upon request.