Used Ventilation System for sale (1,607)

Condition: new, Year of construction: 2025, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 Ffedpfsfy T Spex Ag Rjt ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Condition: new, functionality: fully functional, Year of construction: 2025, color: grey, overall weight: 1,000 kg, loading space width: 2,400 mm, loading space length: 6,000 mm, loading space height: 2,700 mm, Equipment: air conditioning, lighting, Dear Sir or Madam, Thank you for your interest in our innovative modular solutions. We are pleased to present our exclusive VASG Elite Series showroom container. This model combines state-of-the-art architecture with maximum functionality and is ideally suited as a prestigious sales office, exhibition space, or exclusive garden office. Ref. Offer: 102292 Product Code: ES-600ST PRODUCT DETAILS & TECHNICAL DATA External Dimensions: 600 cm (L) x 240 cm (W) x 270 cm (H). Ceiling Height: Comfortable net interior height of approximately 250 cm. Construction: Highly stable, galvanized steel frame, painted in anthracite gray. Wall & Roof System: 50 mm PU sandwich panels and 4+3 cm PU insulated roof sandwich panel for maximum thermal efficiency. Ffedpjx N Aupsfx Ag Rot Flooring: Heavy-duty PVC industrial flooring in a modern wood look. FACADE DESIGN & ELECTRICAL ENGINEERING Panoramic Glass Front: Symmetrical design with a central PVC insulated glass sliding door and two fixed panoramic windows. Ventilation: Additional double-leaf PVC sliding window (100 x 110 cm) on the side wall. Electrical Installation: Complete set compliant with CE standards (LED panels, fuse box, 3 x sockets, 32A external connection). Additional Options: Windows, doors, air conditioning, heating, toilet and shower units; custom color and size options are available at an additional cost. PRODUCTION, LOGISTICS & CUSTOMS SERVICE We offer seamless, one-stop service: Direct shipping from the factory: Production takes place at our factory in Turkey, from where delivery is made directly to your destination address. Complete Customs Clearance: We handle all customs formalities and import processing completely. You will incur no administrative burden. Delivery Condition: The container is delivered fully assembled. INDIVIDUAL SHIPPING COSTS & QUOTE Since transport costs vary depending on the destination, we would be happy to provide you with a customized quote including delivery: Please send us your complete delivery address. We will immediately calculate the logistics for you and send you a personalized quote. TIMELINE & WARRANTY Production Time: Stock items are available immediately; custom orders take only 10 to 15 business days. Delivery Time: Austria, Germany, Benelux, Italy, Balkans, Hungary: 7-14 days UK, Baltic States, France, Spain, Portugal: 10-20 days Other countries: On request. Invoicing: Billing is handled by VASG KFT (Hungary). We look forward to realizing your project and are happy to answer any questions you may have. Sincerely, Your VASG Team Innovative Modular Solutions

Year of construction: 2024, condition: new, A part of our machines is available IMMEDIATELTY. Dust collector 7.5 kW DCO-7500-N Overview A dust collector is a part of a ventilation system. It is designed to remove suspended particles. This task is fulfilled with a fan rotor and replaceable filter canisters. Using a dust collector improves air quality, making it easier to keep the connected machine clean, and extending its life. Dust collectors are safe for operators and the environment. Specifications - Input voltage: 400V AC 50hz - Efficiency: 3000-4000 m3 - Nominal power: 7,5kw - Filtration area: 40 m2 - Number of filters: 4 units - Filter size: ⌀325 mm - Filter height: 660 mm - Weight: 400 kg - Height: 1980 mm Ffjdpsium Ipefx Ag Rst - Width: 1000 mm - Depth: 1000 mm

Condition: good (used), Dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower, radial fan, ventilation blower, radial blower, blower, fan Fedjuqq Rxopfx Ag Rsft -Fan: Radial fan -Type: unfortunately no type designation -Engine designation: 1994.12.26 BB61B698H VDO36SB -Total dimensions: Ø 287 x 135 mm -Weight: 4.6 kg

Condition: used, operating hours: 22,327 h, Fiat-Hitachi Fh 220 | Used Tracked Excavator | 22327 hours 📍Location: Germany, Meppen 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 15000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 63 inspection points 37 approved ✅ 19 imperfect ℹ️ 7 issues ⚠️ 📌 Inspector's Comment: Fodpfxex N Havo Ag Rsft Heavily used machine. Air conditioning not available. Windshield wiper is defective. Ventilation of the hydraulic oil is defective. Operating hour meter is defective; no reliable information available. Track shoes can be cut at an additional cost to reduce transport width. The year of construction is unknown and cannot be verified. The operation manual states 1980 or 1990, but this cannot be confirmed. The operating hour meter is from another machine, the displayed hours are incorrect. The machine has possibly between 20,000 and 30,000 hours. The cabin has been replaced and is not original. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39638 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: new, mileage: 100 km, power: 130.18 kW (177.00 HP), first registration: 11/2025, fuel type: diesel, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 4, emission class: euro6, suspension: steel, number of seats: 3, Year of construction: 2025, Equipment: ABS, AdBlue, Bluetooth, USB port, air conditioning, airbag, central locking, crane, cruise control, electronic stability program (ESP), fog lights, full service history, lane keeping assist, navigation system, non-smoking vehicle, onboard computer, power assisted steering, start-stop system, tachograph, trailer coupling, Iveco Daily, Gross Vehicle Weight Rating 7,200 kg, Cab, 3.0 180 HP, Hi-Matic Automatic Transmission 3-Way Tipper + High-Performance FASSI Loader Crane Comfortable remote control of the crane (radio control) Rotator for adapting various attachments. (Chassis year 2024) Special equipment for chassis Connect Hi-Matic Package - Additional, adjustable and switchable speed limiter - 170 cm³ A/C compressor (for Daily models) - Two-way adjustable steering column - Fully padded headrests with memory foam, Daily logo - Comfort-sprung driver’s seat (3-way adjustable, lumbar support, armrest) - Fixed 2-seater passenger bench with folding table, 3-point seatbelts - Daily radiator grille with chrome strips - Cabin ventilation and heating system with automatic climate control - HI-CONNECT digital radio, steering wheel controls, Bluetooth, connectivity + navigation - Leather steering wheel - Active Adaptive Cruise Control ACC with radar sensor + traffic jam assistant - Telematics module Connectivity Box (3G) - Electrically actuated parking brake - Front fog lights - Full LED lighting (daytime running, low and high beam) - Rear multi-leaf spring suspension (semi-elliptical), two-stage, with auxiliary spring - Overhead storage compartment above windshield - 9th generation Electronic Stability Program ESP + Crosswind Assistant Additional specifications: - Increased permitted GVW to 7,200 kg - Extended exterior mirrors, 2,550 mm - Automatic headlights and wipers - In addition: 3-way tipper body by ACORD + FASSI loader crane - Internal dimensions: 4,500 × 2,450 × 500 mm - Reinforced subframe made of high-strength steel - Tipper frame made of high-strength steel (steel grade according to availability), with ball bearings, including two safety bolts - Hot-dip galvanized subframe - Tipper bed blasted and painted in RAL 7024 (dark grey) - Painted steel sideboards, height 500 mm - Sideboards fully fold down - Removable side and rear boards - Rear board opens downward and swings automatically at top when tipping - Front wall for crane protection, approx. 500 mm high, reinforced with welded steel grid for collision-free crane operation - Floor made of high-strength steel plate - Hydraulic tipping via hydraulic pump driven by PTO - Hydraulic cylinder from a renowned manufacturer with increased lifting capacity - Tip angle limiter and additional steel cables as safety against exceeding the tipping angle - Plastic wheel arches above rear axle - Side and rear LED marker lights - Protected combined rear lights - Adjusted rear vehicle overhang - Spare wheel relocated to vehicle side - Tipper cover with roll-up tarpaulin on drum, manual crank operation, latches to hooks on sideboards - 3.5 t tow hitch mounted at rear cross member Hydraulic Loader Crane FASSI M40A.1.13 - FASSI M40A.1.13 loader crane (hydraulic boom up to 4.75 m) - Radio remote control for the crane incl. control panel + emergency cable - Two additional control functions for hydraulic attachments – remote controlled - Rotator incl. adapter, connector and hydraulic hoses - Electro-hydraulic pump for crane supply First registration: 10/2025 FURTHER INFORMATION: Ffodjx Swlzopfx Ag Ret Premium Kfz Outlet GmbH Fichtenhöhe 3 02829 Schöpstal OT Ebersbach Germany ONLINE SALE We speak German We speak English We speak Russian We speak Polish

Condition: used, Year of construction: 2008, Fabricant : WAM Model : WAMFLO FNXB 4 J21 Type: Round filters for potentially explosive atmospheres Year: 2008 Type: Dust collector ATEX: ExII3D135°C(T4) Suction ventilation: 4 KW Separation type: Filter bags Separation surface area: 21 m2 Cyclone diameter: Ø 1000 mm Ffedsx R D E Sjpfx Ag Rjt Cleaning solenoid valve: 6 units Documentation available: digital version   Filters not included with the machine. -> Supply of new consumables: this service may be subject to an additional quote.

Year of construction: 1999, condition: good (used), Radial fan, high-pressure radial fan, pressure blower, vacuum blower, ventilation blower, blower, radial blower, side channel blower -Manufacturer: Reitz, Radialventilator -Type: MXE 100Engine power: 22 kW / 3000 rpm -Volume flow: 100 m³/min -Pressure increase: 1000 daPa Fodpjvy Hu Asfx Ag Rsft -Connection input: Ø 275 mm -Connection: Ø 220 mm -Dimensions: 870/1220/H1210 mm -Weight: 370 kg

Condition: used, Year of construction: 2003, Manufacturer : Martin Christ Gefriertrocknungsanlagen GmbH Model: EPSILON 2-6D Year: 2003 Type : Laboratory and pilot freeze-dryer Applications: Dry or liquid drying in vials, bottles, ampoules, flanges, trays, etc. Examples of products: Biological products: bacteria, viruses, tissues, plant extracts / Pharmaceutical products: plasma, serum, antibodies, vaccines / Biochemical tests / Food products: ferments, vitamins General data : Pre-freezing, freeze-drying (sublimation) and final drying Vacuum application, < -10°C 3 + 1 shelves Shelf surface area: 0.3 m². Distance between shelves: 68 mm Software: SCADA Software Cleaning flange Sample extraction system Manual stopper for vials Ice condenser : Capacity: 8.0 kg Performance: 6.0 kg / 24 h Temperature: -75°C Dimensions : Width: 800 mm Depth: 840 mm Height: 1640 mm Weight: ~650 kg Energy data : Power supply: 3-phase, 400 V / 50 Hz Power consumption: max. 5.0 kVA Max. ambient temperature: +25°C Refrigerant : Types : R404A, R508, Isceon 89 Heat transfer fluid: Syltherm XLT Technical connections Warm water inlet: ½" hose connection Defrost water drain: ½" hose connection Vacuum exhaust: DN 25 stainless steel pipe Fjdjx R Dlfspfx Ag Rsft Ventilation: DN 6 connection Others : Documentation and qualifications available Sold with LPC plus computer for data analysis. Spare parts

Year of construction: 1972, condition: good (used), Radial fan, high-pressure radial fan, pressure blower, vacuum blower, ventilation blower, blower, radial blower, side channel blower -Manufacturer: Piller, radial fan pressure blower -Type: R08 800 Ffodpfx Aovcyw Njg Rot -Engine power: 5.5 kW / 2880 rpm -Volume flow: 12 m³/min -Connection input: Ø 140 mm -Connection output: Ø 75 mm -Protection class: -Dimensions: 1290/470/H1040 mm -Weight: 150 kg

Year of construction: 2000, condition: used, Manufacturer : Dumoulin Model : TD 1500 Year: 2000 Type: coating machine Classification: ATEX motorisation and sensors Operating unit: from 4 to 15 kg of mass to be impregnated. Coater type: solid drum for impregnation Turbine diameter: Ø 600 mm Turbine depth: 400 mm Removable mixing blades Materials: 304 L stainless steel Unloading: automatic by reversing the rotation of the cylinder Driven by 0.37 kW geared motor, electronic variable speed drive from 2 to 25 rpm. T°C recorder Ffsdpfxox R A Rgo Ag Ret Timer Rotor speed indicator Ventilation unit integrated into the frame : 1 x EU 13 air filter (absolute filter) 1 x 0.37 kW electric fan 1 x ADF electric heater (heating element) 1500 W with temperature regulator (sensor) 1 x stainless steel nozzle and blower in the drum      

Condition: good (used), Fan, blower, electric motor, blower, radial fan, emergency ventilation fan, flue gas fan, axial fan, axial ventilator, axial fan -Manufacturer: Ziehl-Abegg, axial fan -Type: FE050-4EK.41.V7 -Power: 0.78 kW / 1250 rpm -Fan: Ø 585 mm Fsdpfx Aoizxq Asg Roft -Number: 1x fan included -Price: per piece -Dimensions: 585/585/H185 mm -Weight: 13 kg/pc.

Year of construction: 1990, condition: used, Manufacturer : Dumoulin Model: 5X Year: 1990 Fsdpjx R A Rajfx Ag Rsft Type : Tablet coater / Drum coater Drum diameter : Ø 50 cm Total volume : 65 L Emptying / removal : frontal Spraying and cleaning nozzles Light for inside Temperature sensor Watson Marlow 313S peristaltic pump Gerbhardt and Ebmpapst ventilation and suction Mobile chasis: 4 wheels  

Condition: good (used), Fan, ventilator, electric motor, blower, electric motor, blower, radial fan, emergency ventilation fan, flue gas fan, ventilation fan, exhaust gas extraction -Manufacturer: Ziehl-Abegg, radial fan type DKHR 310-4-4 -Speed: 1330/1050 rpm -Power: 0.12 kW -Protection class: IP 44 -Dimensions: Ø 310 x 165 mm Fedpfx Aeqpl Rusg Rsft -Weight: 5.5kg -Quantity: 1 piece available

Year of construction: 1991, condition: used, Equipment used for coating of food or pharmaceutical products. Non-tilting stainless steel turbine 2 liquid spraying ramps / 2 powder spraying ramps Complete installation with : – 2 x interchangeable spraying / coating arms including each: 1 liquid spraying ramp with double heating jacket + 1 powder spraying ramp. – Accurate unit dosing powder (screw system) – Galvanised steel frame / mobility rail for the 2 spray arms (easy switching) – Lateral unloading trolley – Ventilation / air treatment unit – 8 weights / scales on the feet – Electrical cabinet – 500 litre melting tank skid Max. load 3000 kg One-sided loading, Central unloading with reverse rotation Ffsdpfex Rz H Hox Ag Rjt Length 8 m x diam. 2.2 m + Documentation and drawings available

Condition: good (used), fan, ventilator, electric motor, blower, electric motor, blower, radial fan, emergency ventilation fan, flue gas fan, axial fan, axial fan, axial fan, fan motor Fedpouqq N Iofx Ag Roft -Manufacturer: VEB ILKA, axial fan axial fan -Type: S4D350-AF10-17 -Motor: 25 W 1380 rpm -Voltage: 220/380 V -Dimensions: Ø 380 x 140 mm -Weight: 4.0 kg

Condition: excellent (used), Fan, blower, electric motor, blower, radial fan, emergency ventilation fan, flue gas fan, axial fan, axial ventilator, axial fan -Manufacturer: Ziehl-Abegg, axial fan -Type: EA 420/4 -Power: 0.45 kW / 1300 rpm -Voltage: 220 V -Bolt circle: 115 mm -Number: 4 fans available Price: per piece -Dimensions: Ø 420 x 135 mm Fedpjuqq Nujfx Ag Roft -Weight: 6.2 kg/pc.

Condition: good (used), Fan, ventilator, blower, emergency ventilation fan, flue gas fan, axial fan, axial ventilator, axial fan, suction fan, axial high-performance fan, duct fan -Manufacturer: Sunon, axial fan type SF 23080AT -Voltage: 220/240 VAC -Number: 1x fan available -Dimensions: 80/80/H25 mm -Weight: 0.3 kg Fodeun Du Ejpfx Ag Reft

Condition: good (used), Fan, ventilator, blower, emergency ventilation fan, flue gas fan, axial fan, axial ventilator, axial fan, suction fan, axial high-performance fan, duct fan Ffodpfx Ageun Duxs Rst -Manufacturer: Sunon, axial fan type DP209WR -Voltage: 220/240 VAC -Number: 1x fan available -Dimensions: 120/120/H40 mm -Weight: 0.5 kg

Condition: good (used), Electric motor, three-phase motor, fan motor, external rotor motor for fan, fan, electric motor, blower, electric motor, blower, radial fan, emergency ventilation fan, flue gas fan, axial fan, axial fan, axial fan, axial fan -Manufacturer: Ziehl-Abegg, electric motor fan motor external rotor motor -Type: MK 115-GDK.12.N -Power: 0.35 KW / 380 V -Speed: 1400/1020/710 rpm -Protection class: IP 54 Fodpfx Agjv Ibb Hj Rjft -Dimensions: Ø 190 x 170 mm -Weight: 11.1 kg

Condition: good (used), fan, ventilator, electric motor, blower, electric motor, blower, radial fan, emergency ventilation fan, flue gas fan, axial fan, axial fan, axial fan, fan motor -Fan: axial fan axial fan -Motor: Type D 564 0.11 kW / 1350 rpm -Total dimensions: Ø 440 x 200 mm Fsdpfxeuqq Nzo Ag Reft -Weight: 3.5 kg

Condition: good (used), fan, ventilator, electric motor, blower, emergency ventilation fan, smoke gas fan, axial fan, axial ventilator, axial fan, suction fan, axial high-performance fan Ffsdpfx Aotra Uxjg Rot -Manufacturer: Güntner, axial fan, axial fan, suction fan -Power: 2.79/1.36 kW 890/700 rpm -Fan: Ø 1000 mm -Quantity: 1 piece available -Dimensions: Ø 1000 x 330 mm -Weight: 56 kg/piece

Condition: good (used), Ventilation duct, ventilation flap, ventilation system, filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings, louver damper -Ventilation duct inlet with: filter Fedpfx Agjfff Nio Roft -Outlet: Ø 390 mm -Dimensions: 1340/1100/H600 mm -Weight: 114 kg

Condition: good (used), Extraction slides, ventilation duct slides, slides for filter systems, chip extraction, dust extraction, extraction systems, ventilation ducts and fittings -Length: 470 mm -Connection: Ø 500 mm -mechanical: flap -Material: Steel sheet -Quantity: 1x slider available -Price: per piece -Dimensions: 550/470 mm -Weight: 22 kg Fedpfx Aecba Txsg Rsft

Condition: good (used), Fan, ventilator, electric motor, blower, emergency ventilation fan, flue gas fan, axial fan, axial ventilator, axial fan, suction fan, axial high-performance fan, stable fan -Manufacturer: Multifan, built-in fan suction fan type 6E63 Ffodpjuncx Asfx Ag Rot -Engine: 0.60 kW 900 rpm -Conveying volume: 12020 m³/h -Fan: Ø 630 mm / Ø 640 mm -Protection class: IP 54 -Number: 2x fan available -Price: per piece -Dimensions: Ø 630 x 340 mm / Ø 640 x 340 mm -Weight: 13.1kg / 13kg