Used Vertical Banding for sale (10,724)

Condition: excellent (used), Manufacturer: Yamazaki Mazak Corporation Cpodpfxjyha Ivs Afpeu Model: Nexus VCN-510C Machine type: Vertical CNC machining center Control: MAZATROL 640M X-axis travel: 1,050 mm Y-axis travel: 510 mm Z-axis travel: 510 mm Worktable: T-slot table, moving table Tool magazine: Automatic tool changer (ATC) Control cabinet: Yes Additional equipment: Lubrication system Weight: 7,100 kg

Condition: used, Used vertical stainless steel (AISI 304) mixing tank by ZUGIL (Poland) with a working volume 10000 l. Inside dimensions: diameter 2600 mm x length of straight side of wall 2100 mm. Tank has top mounted 2 level paddle type agitator, driven by reducer and el. motor with power 2.2 kW, 380 volt 3/50 Hz. Working rotation of agitator up to 20 rpm. Agitator is supported at bottom. Mixing chamber is equipped with 4 baffles welded to the wall. Top flat, with bolted stainless steel cover, equipped with hinged inspection manway. Bottom, elipsoidal, welded, with central discharge outlet. Tank is mounted on (3) stainless steel legs. Last time used in chemical production. Specifications: Cpedpeygvlbofx Afpeu Capacity: 10,000 L Diameter: 2,600 mm Height: 2,100 mm Type of stainless: AISI 304 Type Of Heads: Top flat, bottom elipsoidal Vertical/Horizontal: Vertical Legs/Lugs/Skirt: 3 legs

Condition: used, Used vertical stainless steel (AISI 304) mixing tank by ZUGIL (Poland) with a working volume 12500 l. Inside dimensions: diameter 2600 mm x length of straight side of wall 2550 mm. Tank has top mounted 2 level paddle type agitator, driven by reducer and el. motor with power 4 kW, 380 volt 3/50 Hz. Working rotation of agitator up to 18 rpm. Agitator is supported at bottom. Mixing chamber is equipped with 4 baffles welded to the wall. Top flat, with bolted stainless steel cover, equipped with hinged inspection manway. Bottom, elipsoidal, welded, with central discharge outlet. Tank is mounted on (3) legs carbon steel legs. Last time used in chemical production. Specifications: Capacity: 12,500 L Diameter: 2,600 mm Height: 2,550 mm Cedpjygvk Djfx Afpepu Type of stainless: AISI 304 Type Of Heads: Top flat, bottom elipsoidal Vertical/Horizontal: Vertical Legs/Lugs/Skirt: 3 legs

Condition: used, Used vertical stainless steel AISI 316L aseptic pressure storage tank with a total capacity of 830 l by Schwarte-Milfor Sp. z o. o. (Poland) type Mieszalnik procesowy. Tank has a working volume of 700 l and is designed to operate at pressures ranging from -1 to 4 bar and temperatures up to 150 C. The heating and cooling jacket made of stainless steel AISI 304 has a capacity of 152 l and is designed to operate at pressures ranging from -1 to 3 bar and temperature up to 150 C. The jacket is insulated with mineral wool and clad with AISI 304 stainless steel sheet. Internal dimensions: diameter 850 mm, length of straight wall line 1,200 mm. The tank has a welded dished top equipped with an inspection manway with an internal diameter of 450 mm and 9 stub pipes with mounted accessories. The tank has a welded dished bottom head equipped with a central outlet with a NovAseptic valve type NA and 2 stub pipes with mounted accessories. The machine is mounted on 3 legs equipped with tensions cells with a display. The equipment includes full technical documentation of the manufacturer and UDT in polish. Cpodpsygvkwofx Afpsu Specifications: Capacity: 207.5 gal Diameter: 850 mm Height: 1,200 mm Type of stainless: Stainless Steel AISI 316L and AISI 304 for The Jacket Type Of Heads: Dished Vertical/Horizontal: Vertical Legs/Lugs/Skirt: 3 legs equipped with tensions cells

Condition: used, Used vertical, mobile, stainless steel AISI 316L reactor by BOCCARD (France) with a total capacity of 577 l. Reactor has a working volume of 300 l and is designed to operate at pressures ranging from -1 to 0,5 bar and temperatures up to 110 ºC. Internal dimensions: diameter 880 mm, length of straight wall line to inspection manway 800 mm. The heating and cooling jacket made of stainless steel AISI 304 has a capacity of 35 l and is designed to operate at pressures up to 3,5 bar and temperature up to 145 ºC. The jacket is insulated and clad with stainless steel sheet. Reactor has welded dished top equipped with inspection manway, with internal diameter 350 mm. Also in the top head there is a vertically downward installed homogenizing mixer, directly driven by an electric motor with a power of 2.2 kW, 400 V, 960 rpm, 50 Hz. Reactor has welded dished bottom with central discharge outlet and manually operated valve. Machine is mounted on an integrated frame with 4 wheels and an electrical cabinet equipped with an frequency inverter. Codpfx Afsygvgfspjpu Specifications: Capacity: 577 L Type of stainless: AISI 316L and on the jacket AISI 304 Internal Pressure: -10.5 bar Internal Temperature: 110°C Jacket Pressure: 3.5 bar Diameter: 880 mm Straight Side: 800 mm Type Of Heads: Dished top and bottom Legs/Lugs: Legs with wheels Weight: 620 kg

Condition: used, Year of construction: 2019, functionality: fully functional, type of input current: AC, Vertical Packaging Line CAMPAGNOLO C95E-1 + CW14-2.5L (Snacks, Nuts, Cereals, Extruded Products) Complete vertical form-fill-seal packaging line designed for dosing and packing snacks, cereals, or extruded products. The system combines a multihead weigher, vertical bagging machine, and advanced marking and promotional accessories, ensuring high flexibility for different bag types and formats. COMPONENTS Vertical Packaging Machine – Model C95E-1 • For pillow bags and square-bottom bags • Compatible with mono-seal and bi-seal heat-sealable films • Output: up to 60 bags/min (square-bottom) or 80 bags/min (pillow) • Bag width: 50 – 245 mm  Length: up to 390 mm • PLC control with 7-inch color touchscreen (50 recipe memory slots) • Horizontal sealing driven by brushless motor; vertical sealing pneumatic • Encoder for variable bag length adjustment • Automatic film-splicing device and end-of-film alarm • CE-compliant safety protections (EU Machinery Directive 2006/42/EC) • Power consumption: approx. 3 kW  Air consumption: 300 L/min at 7 bar Included accessories • Round forming tube + additional forming set (round and rectangular terminals) • Square-bottom and gusset forming group • Euroslot hole punch unit • Photocell for centered print registration • Stainless-steel product contact parts (AISI 304) • Bag discharge chute and 350 × 2000 mm evacuation conveyor • Stainless-steel rotating table, Ø 1200 mm Multihead Weigher – Model CW14-2.5L • 14 weighing heads with 2.5-liter detachable buckets Cedpfeqbryxsx Afpepu • Stepper-motor operation for precision and quiet running • Accuracy: ± 0.2 – 1.5 g (depending on product) • Speed: up to 75 weighings/min for 40 g packs • 10-inch color touchscreen with 99 recipe capacity • Full stainless-steel frame (AISI 304), IP65 protection rating • Auto-diagnostics and self-test functions • Power requirement: 1.1 kW, 220 V, 3-phase, 50 Hz Included accessories • Synchronization bucket with stepper motors • Buffer feeding belt • Support frame with ladder and safety rails • Product elevator (400 × 5500 mm) • Vibrating feeding hopper (170 L) Additional Integrated Options • Ribbon Printing and Marking • Programmable thermal-transfer ribbon coder, print area 32 × 50 mm, 300 dpi resolution, supplied with software for layout and logo management. • Promotional Ribbon Insertion Unit (Extra-Ribbon Group) • Automatic device for attaching promotional ribbons during bag formation. • Chapelet Group (Chain-of-Bags Formation), for forming continuous strips (chains) of connected bags. • Nitrogen Injection System for modified-atmosphere (MAP) packaging to extend shelf life of products.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 10,00,600 mm, Hartford Pro-1000 Vertical CNC 1000x600 Cedpfxjw Ih Hgj Afpopu

Condition: excellent (used), Year of construction: 2004, Clamping force: 25/35 tons Opening stroke: 200 mm Mould height: 150-300 mm Clamping platen daylight: 350-500 mm Tie bar daylight: 221 mm Mould clamping plattens (b x h) : 342 x 250 mm Ejector stroke: 60 mm Screw diameter: 25 mm Screw stroke: 100 mm Injection volume: 70 cm3 Codpfxjuykh De Afpspu Shot weight: 59 g Injection pressure: 1040 bar Working hours: 34.748

Condition: excellent (used), CATALOG NUMBER 7617 TECHNICAL DATA Cpodpeyg I Axjfx Afpsu - Wheel diameter: 610 mm - Table dimensions: 670x640 mm - Table tilts, angle adjustable - Motor: 2.2 kW - Brake - Max. cutting height: 380 mm - Throat distance (blade to frame): 550 mm - Extraction port diameter: 100 mm - Dimensions (L/W/H): 1150x800x2200 mm - Weight: 360 kg ADVANTAGES – German-made – Not repainted – In very good condition – Used saw Net price: 7900 PLN Net price: 1880 EUR based on a rate of 4.2 EUR (Prices may fluctuate with significant exchange rate changes)

Condition: new, CATALOG NUMBER HL001 - New machine, in stock – Pre-milling unit – Radial scraper + polishers TECHNICAL DATA - Panel thickness: 45mm - Edge thickness: 0.4 mm – 3 mm - Min panel width: 90mm - Min panel length: 90mm - Feed speed: 7m/min - Pre-milling: 9000 rpm - Top/bottom: 10500 rpm - Front/back: 8800 rpm - Polishing: 2800 rpm - Main motor: 6kW - Feed power: 0.75kW - Pre-milling power: 1.5kW Codpfx Afoyg Ecvjpspu - Glue spindle power: 0.25kW - Top-bottom milling power: 0.18kW - Top milling power: 0.55kW - Top polishing motor: 3-phase 0.12 kW, 1-phase 0.18 kW - Bottom polishing motor: 3-phase 0.12 kW, 1-phase 0.18 kW - Working table height: 856mm, extended support width: 560mm - Extraction connection: 3x100mm - Dimensions (L/W/H): 3200/1200/1200mm, weight: 660kg Net price: 49,900 PLN Net price: 11,880 EUR based on 4.2 EUR exchange rate (Prices may change with significant fluctuations)

Condition: new, band saw according to CE and with the following features strong cast iron work table, inclinable balanced cast iron fly wheels saw blade guide, telescopic saw blade tensioning indication upper and lower saw blade guide cleaning brush for the lower fly wheel sturdy AL fences max saw blade width 16 mm Codpfxodibw Aj Afpspu suction connection under the table micro switches on machine doors work table dimensions 600 x 520 mm working table height 900 mm fly wheel DM 450 mm fly wheel speed 700 U/ min max cutting height 300 mm max cutting width 440 mm min/ max saw blade length 3690/ 3742 mm min/ max saw blade dimension 6 x 0,5 / 25 x 0,5 mm motor 3,0 kW, 3 Ph 50 Hz, 400 V suction connection 120 mm

Condition: excellent (used), Year of construction: 1993, max. edge thickness coils 0.2 - 3 mm max. edge thickness solid strips15 mm feed speed 12/ 18 m/min glue plot heating time approx. 6 min autom. strip magazine coil magazine granulate heating pot flush trimming unit radius trimming unit operating panel extendable work piece support noice cancelation hood machine length 3800 mm Cpjdpfx Asfbr S Rofpsu Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: new, Thin layer from 2 mm thickness Maximum cutting accuracy up to ± 0.15 mm Minimal kerf, cutting thickness from 1.3 mm Ideal for the cutting of dried and wet wood or alternative materials Surface of the thin layer ready for gluing without need of further processing steps Friendly user electronic control Two programmable speeds of the carpet (0-30 m/min) for the best cutting quality and to safeguard the blade life Optical sensor to start cutting cycle and speed change Ground table Cjdpfjdcd Dlex Afpopu “Flexam” belt feeding for the best performance 6 rubber idler rollers adjustable in height, for opening/closing to ensure the best pneumatic pressure on the workpiece during feeding and cutting Oleo-pneumatic tensioning of the blade for better cutting performance Top and bottom ‘’Chaco’’ blade-guides which guarantee the best stability blade during cutting Internal/external lubrication of the blade to remove residues of resins and chips 4 dust extraction to optimize the suction of dust and chips Cutting height of 400 mm (500 mm optional) Cutting width up to 400 mm High quality powerful motor kW 15 (HP 20) Ethernet connection for on line service Carbide or stellite blades for best cutting performance DM of saw wheels mm 800 Max. cutting height mm 400 fixed working table mm 1290 x 800 Max. saw blade width mm 54 x 0,9 Max. & min. saw blade length mm 5530 / 5380 motor Kw 15 (HP 20) suction connection nr 2x Ø 120 & 1 x Ø 100 compressed air requirement bar 6/ 27 ltd machine weight Kg 880 feed speed m/min 0 - 30 height of feeder belt mm 300 length of feeder mm 750 feeder roller DM mm 160 Max. feeder opening mm 200 Max. fence opening mm 200 feeder speed var. mt/ min 0-30

Condition: reconditioned (used), reinforced gray cast iron table, tiltable balanced cast iron wheels precise upper & lower blade guide Work table dimensions approx. 680 x 580 mm Cast iron wheel diameter 600 mm Max. cutting height 340 mm Max. cutting width approx. 540 mm Csdpfx Afev Dg A Ujpepu Three-phase motor approx. 2.2 kW, 50 Hz, 400 V

Condition: excellent (used), Year of construction: 2002, edge seize 0,2 - 12 mm work piece dimension width min. 70 mm height min. / max. 8 / 42 mm length min 160 mm (strips) length min 60 mm from roll Durchlaufgeschwindigkeit: 12 m/ min glue coating with roller working height : 880 mm compressed air 6 bar,1/4 Zoll suction connection, DM 160 mm dimensions: L x W x H = 5600 x 950 x 1300 mm weight: ca. 2200 kg Cedohy Tlrspfx Afpopu total conection: ca. 11,5 kW, 400 V, 50 Hz machine equipped with: - double top roll pressure with electric height adjustment - autom. roll magazine for rolls up to 800 mm DM, pneumatic cutting up to 3 mm - autom. infeed fence - no adjustment of edge seize premilling aggregate with 2 HF-motors 1,5 kW, 12000 n double end trim unit - 2 HF-motors 0,2 kW, 12.000 n 2 autom. positions = 0 + 3 deg. flush trimming aggregate with 2 HF-motors 0,7 kW, 12.000 n radius trimming unit - with2 HF-motors 0, 3 kW, 12.000 n, radius scraping unit, autom. set in flat scraping unit Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: new, The model ME 40TR is SCM’s ‘bestseller and in this category offering unrivaled price / performance ratio. We can offer the following new machine SCM me 40tr, CE Volt 400 EU, frequency 50 Hz edge thickness coils 0,4 - 3 mm Cpedpfec S Di Rex Afpju max. edge thickness strips 5 mm min. – max. work piece thickness 8 - 50 mm feed speed 9 m/ min glue pot unit 0,18 kW, capacity 0,8 kg premiling aggregate 2,2 kW, 9000 U/ min end-cutting unit with "Radius" allows you to make a radius on the corners of the edged panel trimming unit 2 x 0,35 kW, 12.000 U/ min OPTIONAL device for panel preheating edge scraping unit flat scraping unit grooving unit 1,1 kW, 12.000 U/ min, notch width 4 mm brushing unit with 2 independent motors magazine for strip edges kid for quick exchange of glue unit ...

Condition: new, Hebrock Model F 2 next Offer type: New machine, SALE ONLY IN AUSTRIA! Immediately available new machine with special offer price and full manufacturer warranty. The 3.3 m long F 2 is not only inexpensive and space-saving. It also has the equipment you need to process perfect edges right from the start: diamond-tipped jointing cutters guarantee excellently prepared workpieces for edging. The equipment includes a jointing unit (up to 2 mm milling depth), the top-mounted fast heating glue container, cross-cut saw and combination router. Optionally, the F 2 can also be equipped with a surface scraper. max. edge thickness: 3 mm max. workpiece thickness: 50 mm Ready for operation in 3.5 min Feed rate approx. 10 m/min Equipment: Edge banding machine F2 next With PLC control (incl. touch screen) Hot melt glue application to the workpiece for edgebanding material up to 3 mm jointing cutter (incl. slide - tool) up to 2 mm milling depth maintenance-free glue basin with change basin pre-equipment incl. glue discharge device HF crosscut saw station (approx. 12000 rpm) HF milling station (approx. 12000 rpm) with separate pneumatic milling adjustment and interchangeable plate milling cutter (combination version) robust chain drive ball bearing mounted double roller top pressure viewing window from rear side of machine extractable workpiece support Including special equipment: F2/12 surface scraper (incl. pneum. lift) F2/30 pneumatic 3-point adjustment (radius- ,chamfer-, flush milling) Csdel D Rp Espfx Afpepu F2/27 Nesting for milling stations

Condition: excellent (used), Year of construction: 2007, Edge thickness 0.2 - 12 mm Workpiece thickness 8 - 52 mm Workpiece width min. 70 mm Workpiece length min. 150 mm Automatic edge magazine milling unit 2 x 1.5 kW, application-controlled Cut-off unit 2 x 0.3 kW Flush trimming unit 2 x 0.7 kW, scanning on one side Fine trimming unit 2 x 0.35 kW, tiltable 15/ 30/ 45 degrees Fine trimming unit 2 x 0.3 kW, R=2, scanning on both sides Corner copying unit 2 x 0.3 kW Scraper unit, autom. in/ out Flat scraper unit Buffing unit 2 x 0.2 kW, oscillating 5 x spray device (2 x release agent, 1 x lubricant, 2 x cleaning agent) Color touch screen control OTT C3 Motorized height adjustment Feed 10 - 14 m/min COMBI MELT gluing part for EVA/ PUR, volume 1.5 l Codpfx Ajlc Ewijfpjpu CE mark Total connection 12.6 kW Dimensions L x W x H approx. = 6120 x 840 x 1500 mm Weight approx. 2,900 kg

Condition: used, Year of construction: 1985, edge thickness 0,4 - 12 mm work piece thickness 10 - 55 mm work piece length min 160 mm work piece width min 65 mm feed speed 13 m/ min Cedpfx Afoc Tmygjpspu compressed air 7 bar machine length 5420 mm weight 1950 kg glue pot with quick melt system glue application roller wit left and right turning edge magazine for PVC and strips motor height adjustment for pressure beam pneumatic pressure rollers for edge magazine control panel, rotatable all aggregates in-line controlled cutting milling combination with 2 aggregates, 1st aggregate straight, 2nd aggregate radius and phase milling tool draw blade buffing unit central lubrication for transport chain quick change system edge control system with error msg IR heater CE Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: ready for operation (used), machine/vehicle number: 532-96103, Half automatic band saw with a cutting range upto 280 mm diameter. Cjdpfsiwlmcsx Afpjpu Saw length 4318 mm

Year of construction: 1994, condition: defective spare-parts repository (used), machine/vehicle number: VM40027E, Selling for spare parts 2 CNC milling machines Hitachi Seiki VM40II and VM50. Cpsdpfx Ajd Tf Npsfpou

Condition: excellent (used), AGAZZIANI 900 resaw band saw Wheel diameter: 900 mm Pneumatic pressure on the feed roller Feed speed adjustable Cjdpsyfmx Nofx Afpepu Motor power: 11 kW Dimensions: 180x100x270 cm (H)

Condition: excellent (used), Year of construction: 2012, operating hours: 27,960 h, functionality: fully functional, travel distance X-axis: 1,016 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 27,900 h, number of spindles: 1, number of slots in tool magazine: 41, Haas VF-3SSYT 5 axis Technical specifications: travel distance X-axis : 1016 mm travel distance Y-axis : 660 mm travel distance Z-axis : 635 mm • Spindle 12,000RPM • Tool Clamping SK/BT 40 • Tool Magazine – 40 Places +1 • Chip conveyor • ICS included (might be 30 bar) • Process Measurements – Renishaw Kit – OMP+OTS • Production Date –2012 Cedpfsxbifcjx Afpjpu • Spindle time - 27900 • 5 axis on the table Located in Israel 2 hour from international Airport under power and ready for inspection

Condition: used, Year of construction: 1975, Vertical Turret Lathe 1512 Swing diameter over bed, mm: 1250 Maximum workpiece mass, kg: 6000 Maximum workpiece height, mm: 1000 Spindle speed range, min/max, rpm: 1.25 / 250 Main drive motor power, kW: 30 Machine dimensions: 2920 x 2705 x 4100 Cpodpfxjya U Tqo Afpsu Machine weight, kg: 14800

Condition: used, machine/vehicle number: 007361, X axis working area: 3050 mm Y axis working area: 850 mm Main Electrospindle power: 9 KW Number of controlled axes: 3 axes Cpodpfx Asx A Tibofpeu Total number of drilling spindles: 19 Total number of tool changer positions: 3