Used Vertical Borer for sale (7,626)

Condition: excellent (used), Year of construction: 2012, operating hours: 27,960 h, functionality: fully functional, travel distance X-axis: 1,016 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 27,900 h, number of spindles: 1, number of slots in tool magazine: 41, Haas VF-3SSYT 5 axis Djdoxbifcjpfx Afpsun Technical specifications: travel distance X-axis : 1016 mm travel distance Y-axis : 660 mm travel distance Z-axis : 635 mm • Spindle 12,000RPM • Tool Clamping SK/BT 40 • Tool Magazine – 40 Places +1 • Chip conveyor • ICS included (might be 30 bar) • Process Measurements – Renishaw Kit – OMP+OTS • Production Date –2012 • Spindle time - 27900 • 5 axis on the table Located in Israel 2 hour from international Airport under power and ready for inspection

Condition: ready for operation (used), max. wheel diameter 150 mm gear width 1 - 200 mm max. module 4 min. module 1 control Sinumerik 840 D table diameter 140 mm maximum axial offset 200 mm milling tool taper ISO 40 diameter of hob max. 130 mm cutter length max. 220 mm milling spindle speeds (infinitely variable) 300 - 1200 U/min shifting max. 170 mm milling head -swivable +/- 45 ° feed speeds 1 - 1500 mm/min rapid travel speed 3000 m/min max. workpiece diameter im Magazin: 150 mm total power requirement 50 kW weight of the machine ca. 8,5 t Duodpfjvzhg Nox Afpen dimensions of the machine ca. 4,7 x 3,6 x 2,6 m Used gear hobbing machine, Pfauter, new in 1992 completely overhauled in 2023 by the specialist company SerWeMa, with Siemens Sinumerik 840 D control system and workpiece magazine.

Condition: used, Year of construction: 1998, x-travel 1700 mm y-travel 400 mm Dsdpsxddq Sofx Afpeun z-travel 400 mm table surface area 2x 1100 x 420 mm table load 500 Kg tool taper SK 40 control Sinumerik 810 D Siemens turning speed range - spindle 30 - 6000 U/min tool piece magazine with 20 Plätzen Working speed 1 - 30000 mm/min rapid traverse x / y / z axis 30 / 30 / 30 m/min total power requirement 20 kW weight of the machine ca. 5 t dimensions of the machine ca. 3,8 x 2,8 x 3,1 m

Condition: ready for operation (used), Year of construction: 1999, x-travel 1800 mm y-travel 520 mm z-travel 520 mm control iTNC 426-M spindle speed: 8000 UpM table-size 2300 x 420 mm rapid travel x/y/z 30 m/min tool taper SK 40 table load 3 t tool piece magazine with 30 Plätze Dodexg R Hrjpfx Afpoun spindle drive 22 kW max. torque on the spindle 220 Nm weight of the machine ca. 5,5 t dimensions of the machine ca. 3 x 5 m Hedelius 3-axis vertical machining center, model CB 50-1800, with Heidenhain iTNC 426-M control. Machine dealer with own stock of 1600 m².

Condition: excellent (used), Year of construction: 2012, operating hours: 40,226 h, functionality: fully functional, machine/vehicle number: 221240, screw diameter: 40 mm, injection weight: 172 g, As an injection molding machine dealer, we offer the following well-maintained used injection molding machine. Of course, we also purchase well-maintained injection molding machines, models from 2010 onwards. We have been a wholesaler of injection molding machines for over 25 years. Manufacturer: Arburg Type: 370S 700-290 with vertical injection equipment Serial number: 221240 Year of manufacture: 2012 Operating hours: 40,226 h Control system: Selogica Dimensions (L/W/H): 3.92 x 1.45 x 2.02 m Weight: 3,300 kg Fully functional Condition very well maintained Extras Device for vertical injection 1 core pull circuit Additional heating band connection 5 free, manually controlled cooling circuits Air valve connection controlled via Selogica Equipment packages: Quality assurance, documentation, advanced monitoring, production control, etc. Flexible part chute. - Highly wear-resistant screw - CF drive - Complete documentation and software (on CF card) German language - From first owner - Made in Germany Constant maintenance by the manufacturer and previous owner Injection unit Screw diameter 40 mm Injection weight 172 g/hp Injection pressure 1530 bar Injection volume 188 cc Clamping unit Clamping force 70 t/700 kN Tiebar spacing 370 x 370 mm Clamping platens 510 x 510 mm Mold height 200 mm Duodpfx Afewg Tt Repon Maximum spacing between platens 600 mm Ejector stroke/force 125 mm/30 kN Hydraulic clamping unit Motor power 15 KW Heating power 7.7 KW - 5 zones Total power 23 KW Warranty Warranty until the first Commissioning Loading/Shipping Free loading onto the buyer's truck or free delivery against freight reimbursement Available from our Hanover/Germany warehouse More pictures to follow Information about the machines we offer and our company - We only sell our own machines purchased from ongoing production from our Hanover warehouse - All machines offered are inspected and tested before dismantling - We do NOT sell insolvency goods - We are NOT an agent dealing with third-party property. - All machines offered come from successful companies for whom maintenance and care are a matter of course - All machines offered can be viewed in our warehouse

Condition: used, Year of construction: 1975, Vertical Turret Lathe 1512 Swing diameter over bed, mm: 1250 Maximum workpiece mass, kg: 6000 Maximum workpiece height, mm: 1000 Spindle speed range, min/max, rpm: 1.25 / 250 Dsdpfx Afeya U Tqjpeun Main drive motor power, kW: 30 Machine dimensions: 2920 x 2705 x 4100 Machine weight, kg: 14800

Condition: used, machine/vehicle number: 007361, X axis working area: 3050 mm Y axis working area: 850 mm Main Electrospindle power: 9 KW Number of controlled axes: 3 axes Total number of drilling spindles: 19 Dedpfsx A Tibex Afpsun Total number of tool changer positions: 3

Condition: used, machine/vehicle number: 008200, X axis working area: 3200 mm Y axis working area: 900 mm Main Electrospindle power: 4.5 KW Number of controlled axes: 3 axes Total number of drilling spindles: 21 Dujdox A Ti Uspfx Afpon Total number of tool changer positions: 5

Condition: used, machine/vehicle number: 008322, X axis working area: 3050 mm Dusdpfx Ajx A Tmyefpen Y axis working area: 1250 mm Main Electrospindle power: 10 KW Number of controlled axes: 3 axes Total number of drilling spindles: 28 Total number of tool changer positions: 4

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Control: SIEMENS Sinumerik 840D Solution Line Working area: Maximum workpiece height: 200 mm Maximum workpiece diameter: 250 mm Maximum swing diameter: 390 mm Maximum distance spindle stop to turret: 580 mm Minimum distance spindle stop to turret: 240 mm Spindles Maximum spindle speed: 5,500 rpm Spindle power per spindle: 37.7 kW Maximum spindle torque per spindle: 300 Nm Spindle nose with short taper (DIN 55026): A6 Axis travel X-axis travel (within working area with closed covers): 365 mm X-axis total travel: 886 mm X-axis travel (over turret center): -20 mm Y-axis travel: +100/-80 mm Z-axis travel: 250 mm 12-position disc turret Capto C5 Dusdpfx Afex Rwv Dopsn

Condition: good (used), Year of construction: 1981, roll diameter 315 mm throat 295 mm workpiece height 190 mm Motor Capacity 0,37/0,8 kW table-size 470 x 450 mm saw band length 2220 mm cutting speeds 450 + 900 m/min weight of the machine ca. 110 kg Dedpfx Asyatycofpsun dimensions of the machine ca. 640 x 510 x 1600 mm

Condition: good (used), Year of construction: 1999, saw blade diameter 450 mm cutting diameter 150 mm Dedpfx Aoxqrdmofpjun saw blade diameter möglich: 400 + 370 mm Saw blade 50 mm saw blade feed stepless ca. 0 - 1000 mm/min rapid return speed 3300 mm/min table rotating + / - 90 Grad cutting speed 7 - 43 m/min total power requirement 4 kW weight of the machine ca. 1050 kg Overall size 1020 x 1350 x 2000 mm Semi-automatic cold circular saw, made by Kaltenbach, type KKS450H, with Siemens S7 PLC control for cutting speed and sawing height, feed roller conveyor, discharge roller conveyors with hand crank, remote control and digital display. Machine dealer with own stock of 1600 m².

Condition: excellent (used), Year of construction: 2014, operating hours: 40,000 h, functionality: fully functional, I am pleased to offer you a very well-maintained, nearly new AXA VPC 45 U. The machine is available immediately. An on-site inspection under power and in operation is possible at any time, and video footage is available. Machine hours (ON): approx. 40,000 Spindle hours (ON): approx. 25,000 Travel ranges (linear axes): X-axis: 2,940 mm Y-axis: 1,400 mm Z-axis: 900 mm 5-axis simultaneous machining: This machine is a true 5-axis machining center, enabling simultaneous 5-axis milling with X/Y/Z + B-axis (stepless swivel head) + C-axis (NC rotary table). This allows workpieces to be machined in a single setup with continuous movement from various spatial orientations. Machine (basic data) Machine type: Vertical gantry machining center Manufacturer: AXA Entwicklungs- und Maschinenbau GmbH Dodpfx Afeyh Nrzepsun Model: VPC 45 U Year of manufacture: 2014 General technical data Overall length: 6,800 mm Overall width: 3,600 mm Overall height: 4,100 mm Total weight: 29 t Electrical data Connection voltage: 3×400 V / 230 V / N / PE, 50 Hz Connected load: 69 kVA Main fuse: max. 125 A Control voltage: 24 V Spindle Spindle design: Hollow shaft motor, water-cooled Speed range: 30–10,000 rpm Tool holder: SK40 Drive motor: DME 112 AL-4FGS (Kessler) Max. power at 40% duty cycle: 40.0 kW Max. power at 100% duty cycle: 26.6 kW Max. torque at 40% duty cycle: 191.0 Nm Max. torque at 100% duty cycle: 127.0 Nm NC rotary table Rotary table: RTA 6S-1500 Table diameter: Ø 1,500 mm Weight: 2,700 kg Max. payload (vertical rotary axis): 10,000 kg Tool changer Tool changer: Type M Number of tools: 100

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, CNC HASS VF-2SS 2011 Dujdpfjyh Rwxjx Afpjn

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, CNC HAAS VF-1 2015 Djdeyh Rwrepfx Afpjun

Condition: like new (used), Year of construction: 1998, functionality: not functional, turning height: 1,900 mm, workpiece weight (max.): 15,000 kg, turning diameter: 2,630 mm, faceplate diameter: 2,500 mm, total height: 5,000 mm, total width: 4,800 mm, total length: 4,800 mm, rotary table diameter: 2,500 mm, table load: 15,000 kg, table diameter: 2,500 mm, year of last overhaul: 2025, warranty duration: 12 months, overall weight: 38,850 kg, table speed: 2,500 mm/min, SC2700 Vertical Turning Lathe 2700 with 2 Work Heads - Retrofit Completed Specifications: Retrofit status: recently upgraded (mechanical, electrical, hydraulic systems), in course to be put under power. Electric cabinet: new electric equipment, cables, portcables, covers. Main motor: original 55 kW, revised. Condition: mechanically like-new, low working hours. Inspection: available any time. At request, it can be overhightened for a higher workpiece, or receive an CNC upgrade. Price, install and transport on request. Dusdpfx Aeygldgsfpon More technical specifications on request.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, nominal power (apparent): 16 kVA, number of spindles: 4, number of slots in tool magazine: 21, CNC BROTHER model TC-32B QT 2006 Dujdpfeyh Rbdsx Afpen

Condition: like new (used), Year of construction: 2018, Clamping force: 25 ton Version: Shuttle table Opening force/stroke min.- max. : 100/225 mm Mould height variable min.- max. : 122-222 mm Shuttle table stroke: 500 mm Wight on shuttle table. max. :120 kg Ejector force/stroke max. : 16/40 kN/mm Screw: 22 mm Effective screw length L/D : 20 Screw stroke max. : 90 mm Stroke volume: 34 cm3 Shot weight: 31 g Injection pressure: 2.000 bar Dedpfx Ajyfg D Sjfpsun Working hours: 15.571 h

Condition: good (used), Year of construction: 2006, Ultimax control 24-position tool changer internal coolant supply (IKZ) chip conveyor travel X 610 mm travel Y 510 mm travel Z 610 mm table size 760x510 mm SK40 15,000 rpm electronic handwheel Djdpfxeyh Nrns Afpsun Machine weight approx. 4700 kg

Condition: ready for operation (used), Year of construction: 2014, operating hours: 10,423 h, functionality: fully functional, travel distance X-axis: 740 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 4,500 rpm, turning diameter: 200 mm, three-jaw chuck diameter: 260 mm, TECHNICAL DETAILS Djdpfx Aoyhmfbefpsun X-axis travel: 740 mm Y-axis travel: 30 mm (optional) Z-axis travel: 400 mm Chuck diameter: 260 mm Max. turning diameter: 200 mm Spindle speed: 4,500 rpm Tool speed: 6,000 rpm Rapid traverses Z-axis rapid traverse: 15 m/min X-axis rapid traverse: 60 m/min MACHINE DETAILS Machine weight: 9,000 kg Coolant high pressure: 25 bar Operating hours: 10,423 h EQUIPMENT 3-jaw chuck 4x straight AGW 2x angled AGW 15 fixed tool holders Note: Maintenance work such as battery replacement and function tests have already been carried out.

Condition: excellent (used), Year of construction: 2013, operating hours: 34,000 h, functionality: fully functional, WEISSER VERTOR C-1 L (2013) – Vertical Turning Center with Automation, C-Axis & Live Tooling – SINUMERIK 840D Solution Line For sale is a powerful WEISSER VERTOR C-1 L vertical turning center (year 2013) in excellent, ready-to-run condition. The machine is fully functional and equipped with automation plus a strong configuration for efficient production. The system has been used in an industrial environment for machining shaft/gearbox-related components, including pre-turning and functional turning operations. Thanks to the vertical design, the machine offers very good chip evacuation and high process reliability. Machining capabilities & spindle function (clear explanation) This machine is more than a standard lathe: with C-axis and live tooling, you can perform not only turning operations but also indexed/positioned machining. This enables drilling, cross operations and light milling tasks in one setup—ideal for reduced cycle times and stable part quality. Main spindle / C-axis allows: Duedpfxsyhzgds Afpjn precise positioning for machining at defined angular locations combined turning + live-tool operations spindle speed up to 6,000 rpm for flexible process setup (depending on part and operation) Technical data (extract) Machine Manufacturer: WEISSER Model: VERTOR C-1 L Year: 2013 Condition: used, ready for operation Functionality: fully functional Machine No.: 1580196 Control: SINUMERIK 840D Solution Line Table / Working area Table diameter: 420 mm Swing diameter: 620 mm Center height: 420 mm Spindle bore: 50 mm Axes / travel ranges X1: 320 mm Z1: 844 mm C1 (spindle): up to 6,000 rpm W1 (tailstock): 1,400 mm X3: 1,500 mm Z3: 509 mm Feed rates Max. axis feed: 24,000 mm/min X3 feed: 60,000 mm/min Z3 feed: 30,000 mm/min Tool interface Tool system: CAPTO C5 Electrical data Supply voltage: 400 V AC / 50 Hz Control voltage: 24 V DC Magnet voltage: 24 V DC Rated machine current: 53 A Main fuse: 100 A slow-blow Dimensions & weights Machine (L x W x H): 2,800 x 2,450 x 2,800 mm Machine weight: 7,500 kg Conveyor/belt unit (L x W x H): 2,150 x 3,200 x 1,900 mm, weight 2,500 kg Chip conveyor (L x W x H): 3,500 x 800 x 1,600 mm, weight 500 kg Safety fences (stacked): 2,200 x 1,400 x 800 mm, weight 250 kg Loader (L x W x H): 2,000 x 1,200 x 3,000 mm, weight 250 kg Measuring unit (L x W x H): 700 x 900 x 1,700 mm, weight 500 kg Hours Spindle hours: 13,000 h Operating hours: 20,000 h Power-on hours: 34,900 h Equipment Automation / loading system Programmable tailstock Live tooling Tool measuring station Chip conveyor and peripherals (see technical data) Inspection / delivery Inspection under power possible by appointment. Machine offered ex-works / self-collection. Availability and handover details on request.

Condition: used, machine/vehicle number: 007734, X axis working area: 3050 mm Y axis working area: 850 mm Main Electrospindle power: 5 KW Dujdpfx Afjw Idb Hjpjn Total number of drilling spindles: 19

Condition: used, machine/vehicle number: 006639, X axis working area: 2600 mm Y axis working area: 900 mm Total number of drilling spindles: 22 Duedpfxowuz Hhe Afpen

Condition: used, machine/vehicle number: 007565, X axis working area: 3200 mm Y axis working area: 900 mm Main Electrospindle power: 4.5 KW Number of controlled axes: 3 axes Total number of drilling spindles: 16 Duodpfxewuclls Afpjn

Condition: used, machine/vehicle number: 007468, X axis working area: 3200 mm Y axis working area: 1300 mm Main Electrospindle power: 11 KW Number of controlled axes: 3 axes Total number of drilling spindles: 36 Total number of tool changer positions: 10 Dusdpjwuz Tusfx Afpjn