Used Vertical Borer for sale (7,512)

Condition: good (used), Year of construction: 2017, Traverses X Y Z: 2134 x 1016 x 762mm, Table 2134 x 914mm, Bwsdpfxe Ahww Dj Aczew table load 1814 kgs, Spindle Speed 8,100 rpm, Spindle taper BT40, Spindle Motor 30Hp, HAAS Control, 24 Station ATC, coolant, low volt light, swarf auger

Condition: used, Year of construction: 2008, operating hours: 3,096 h, functionality: fully functional, machine/vehicle number: 1069140, overall weight: 4,500 kg, spindle motor power: 14,900 W, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, HAAS VF-4BHE Vertical CNC Machining Center – 2008 We offer for sale a used HAAS VF-4BHE vertical CNC machining center, manufactured in 2008. Since its purchase, the machine has been used by a single group of companies, operating on one shift and primarily employed for machining aluminum. The machining center is in full working order, has no history of accidents, and is maintained in good operational condition. Bwodpfxj Afypks Aczjw Technical specifications and equipment: - Manufacturer: HAAS - Model: VF-4BHE - Year of manufacture: 2008 - Type: Vertical CNC machining center - Technical condition: fully operational - Servo drive operating time: 3,096 h - Motion time: 594 h - Spindle operating time: 656 h - Tool measurement: Renishaw tool sensor - Part probing: not available - Control software version: M16.10A Terms of sale: The seller does not provide machine loading services – the organization of loading and transportation is the responsibility of the buyer.

Condition: ready for operation (used), Year of construction: 2012, operating hours: 9,020 h, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, feed rate X-axis: 36 m/min, feed rate Y-axis: 36 m/min, feed rate Z-axis: 24 m/min, controller manufacturer: FANUC, controller model: MXP-200FB, workpiece weight (max.): 800 kg, total height: 2,765 mm, total length: 3,650 mm, total width: 2,950 mm, table width: 600 mm, table length: 1,120 mm, table load: 800 kg, overall weight: 6,500 kg, spindle speed (max.): 8,000 rpm, operating hours of spindle: 9,020 h, spindle motor power: 11,000 W, spindle nose: BT40, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, We acquired this machine in working condition from a production environment, and it has always been well-maintained. The machine is in excellent mechanical and visual condition and is currently set up and operational in our showroom! Additional options & accessories: - Chip conveyor - Internal cooling system (ICS) - 30-position tool changer (standard 20 positions) - Electronic handwheel - Air and coolant gun - All original documentation Bwsdj Abkdwopfx Aczjw - Oil skimmer

Condition: like new (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, 5-AXIS MATSUURA MAM72-25V VMC Category: Vertical Machining Centers (VMC) Reference No.: 3651 Year of Construction: 2004 Technical Specification: SPINDLE Bjdpfx Acsx Anlwozoww Spindle Taper : BT 40 WORKING CAPACITY Travels (XYZ) : 550 x 410 x 450 mm CNC Control : Fanuc 30i

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 19991798, travel distance X-axis: 2,500 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 550 mm, controller manufacturer: Heidenhain, TECHNICAL DETAILS Travel range, X-axis: 2,500 mm Travel range, Y-axis: 800 mm Travel range, Z-axis: 550 mm Spindle mount: SK 50 MACHINE DETAILS CNC control: Heidenhain Voltage: 400 V Frequency: 50 Hz Total connected load: 40 kVA Weight: 2,000 kg Bwodpe Ahm Eyjfx Aczsw EQUIPMENT Siemens motors and servo drives Preparation for 4th axis (4th axis not included) Note: Without tools and clamping devices for the machine table & without mist extraction.

Condition: like new (used), Year of construction: 2000, operating hours: 7,600 h, functionality: fully functional, *FANUC ROBODRILL T14-iBL DRILL TAP VMC (4 Axis)* Category: Vertical Machining Centers (VMC) Bsdpfx Asx Ehi Ieczsww Reference No.: 311119 Capacity: 700 X 400 X 330 MM Year of Construction: 2000 Technical Specification: SPINDLE Spindle Taper : BT 30 Spindle Speeds : 8000 RPM Spindle Motor : 3.7 / 5.8 kW WORKING CAPACITY Travels (XYZ) : 700 X 400 X 330 MM Guideways : LM ATC Tool Change Capacity : 14 Tools CNC Control : Fanuc 16iM Additional Details: With Nikken 170 4th Axis

Condition: used, Year of construction: 2015, travel -x axis 620 mm travel -y axis 520 mm travel -z axis 420 mm control HEIDENHAIN - TNC 620 number of spindle speeds 12.000 NC rotary indexing table Ø 650 mm table: swivelling -90 / +110 Grad table load 300 kg numbers of positions in the tool changer 32 tool taper SK40 5-axis simultaneous machining center | SPINNER - U5 - 620 equipped with ITC, NC swivel rotary table, tool changer & chip conveyor. The machine is in a well-maintained condition and can be inspected at any time under power. Please refer to the offer for further technical details. Documentation is available! Bwedpfj Ahzi Eox Aczew - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: U5 620 | U5-620

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 60 h, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 305 mm, total height: 2,704 mm, total length: 1,830 mm, total width: 3,029 mm, overall weight: 3,550 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 60 h, coolant supply: 30 bar, spindle motor power: 26,200 W, number of spindles: 1, number of slots in tool magazine: 40, Equipment: chip conveyor, documentation/manual, Additional features: Lower table BBT30 tool holder CTS 30 BAR 10,000 RPM high-torque spindle 40 tool positions Top cover Manual pulse generator Automatic door Area sensor Hydraulic rotary joint 4P + pneumatic relay box 12P Exio board input 32/output 32 + Profinet slave Spindle overdrive 2 magnetic plates Flaig + integrated control system 400x600 Renishaw T27R (2x) Chip conveyor Cromar 4th axis Kitigawa MR160L + support Corresponding fixtures + bolts (+/-25 pieces) Topsolid 7 post-processor Bwsdpfx Aj Ahhlzsczew

Condition: defective spare-parts repository (used), Year of construction: 2001, travel distance X-axis: 390 mm, travel distance Z-axis: 435 mm, spindle speed (max.): 4,500 rpm, turning diameter: 220 mm, Vertical Turning Machine - Parts Donor Manufacturer: EMAG Model: VL5 Year of manufacture: 2001 Control system: Fanuc 18i The machine has not been tested and is being sold as a source of spare parts. Technical data: - Turning diameter: 220 mm - X-axis travel: 390 mm - Z-axis travel: 435 mm - Tool holder: VDI 40 - Number of tool stations: 12 positions - Spindle speed: 4,500 rpm Accessories, tools, and workholding devices shown in the images are included in the scope of delivery only if specified in the additional information. Bwodpfx Aezz S R Ijczsw Subject to technical changes, errors, and prior sale.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Vertical CNC machining center Chiron Mill 2000 Control system: Heidenhain TNC 640 Year of manufacture: 2023 Internal machine number: 82 Travel ranges: X-axis: 2,000 mm Y-axis: 895 mm Z-axis: 715 mm Clamping area: 2,600 x 910 mm Clearance diameter: approx. 1,150 mm Tool holder: HSK-A63 Tool magazine: 40 positions Spindle speed: 50 - 12,000 rpm Accessories: - NC rotary table with spindle - Water-cooled motor spindle - Integrated rotary table, Ø 500 mm - Measuring probe Blum TC54-10 - Coolant system KNOLL KF 400/900 - Chip conveyor KNOLL 600 K-3/4000 Bwedpfxj Agghdo Aczew - 2 flushing nozzles

Condition: good (used), Year of construction: 2008, Ref. -No.: 10657 Manufacturer: EMAG Type: EMAG VTC 250 Year of construction: 2008 Type of control: CNC Control: Siemens Sinumerik 840D Storage location: Hakberstadt Country of origin: Germany Turning Length: 630 mm Tool Taper: VDI 40 Turret places: 1 Pcs Number of tool stations: 12 pc Turning Speeds: 5000 RPM Chuck diameter: 250 mm Further information: - The machine features an overhead drive spindle with a tailstock at the bottom. - Coolant tank, approx. 1,000 L, including - a paper filter roll. - Clamping devices: Hainbuch clamping top, including various centering tips - Gripping devices on the turrets for feeding and removing raw and finished parts during magazine operation. - Magazine loading Bsdj Ahmv Hopfx Aczoww - Vertical pick-up lathe, which can generally be easily upgraded for automatic loading and unloading. The machine can be viewed while powered on by prior arrangement.

Condition: good (used), Year of construction: 2010, Ref. -No.: 10436 Manufacturer: SCHERER FEINBAU Type: VDZ 120 rechts Year of construction: 2010 Type of control: CNC-Steuerung Control: SIEMENS SINUMERIK 840 Storage location: Halberstadt Country of origin: Germany Machine-No.: 660XX Turning Speeds: 5500 RPM Swing Diameter: 260 mm Rapid Travel Speed X-Axis: 60 m / min Rapid Travel Speed Z-Axis: 30 m / min Travel -X Axis: 626 mm Travel -Z Axis: 250 mm Spindle bearing diameter: 32 mm Rated speed: 1200 1 / min Turret places: 12 Pcs Machine length: 1685 mm Machine width: 2400 mm Machine Height: 2850 mm Weight Of The Machine Ca.: 8 t Further information: Spindle head with short taper DIN 55026: A6 Pallet conveyor WPS KNOLL system (2010) SAUTER turret (12 places) Bsdpfe Ahmuwjx Aczjww Documentation available Tools in the pictures are sold with the machine. Machine can be inspected and demonstrated under power.

Condition: good (used), Year of construction: 2007, HAAS VF-3BHE vertical machining center, 5-axis Year of manufacture: 2007 Specifications: Axis travel: X-1016mm, Y-508mm, Z-635mm Table: 1219 mm x 457mm Table load: 1814 kg Spindle taper: SK40 Spindle speed: 10000 rpm Distance from spindle nose to machine table: 107 - 742 mm Drive power: 22.4 kW Rapid traverse X/Y/Z = 24.5 m/min Tool changer capacity: 40 positions Weight: 6500 kg Dimensions LxWxH = 3400 x 2400 x 2600 mm Accessories/options: - 4/5 axis, TR210 rotary/tilting table Bwsdpfxe Ahn N Ue Aczow - Renishaw OMP40 touch probe - Renishaw TS27 tool measuring unit - Swarf conveyor - Programmable coolant nozzle - Automatic door opening closing PLC possibility - Tool holders with tools, 17 pieces - Coolant tank Run time: 12233 hours Tool changes: 208476 Under power in our warehouse, possible to test it anytime!

Condition: used, Year of construction: 2006, type of input current: three-phase, Equipment: chip conveyor, We offer a used Haas VF-2BHE vertical machining center, manufactured in 2006. Manufacturer: Haas Model: VF-2BHE Machine type: Vertical machining center Beds Agcv Sjpfx Aczsww Serial number: 49679 Date of manufacture: 06/06 Voltage: 360–480 V Phases: 3 Frequency: 50/60 Hz Full-load current: 20 A Largest load: 35 A Short-circuit interrupting capacity: 10000 A Wiring diagram: 96 / 8100 Enclosure rating: NEMA Type 1 If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 016-018271-450, travel distance X-axis: 600 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 580 mm, controller model: FANUC 0i-MD, spindle speed (max.): 8,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 600 mm Travel range, Y-axis: 530 mm Travel range, Z-axis: 580 mm Table area: 840 × 500 mm Maximum table load: 800 kg Drive power: 15 kW Spindle speed: 8,000 rpm Bodpfx Aco Afxygszsww Tool positions: 20 Tool holder: BT 40 MACHINE DETAILS Control system: FANUC 0i-MD EQUIPMENT 20-position tool changer 80 tool holders BT 40

Condition: used, Year of construction: 2020, functionality: fully functional, travel distance X-axis: 3,150 mm, travel distance Y-axis: 2,300 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 6,000 rpm, spindle nose: BT50, WELE SB316YZ YEAR 2020 Bwodpfx Ae Ahfdveczsw BT50 SPINDLE 6000 RMM WITH GEAR BOX TABLE 3100-1450 MOVEMENT 3150-2300-1000+200 DISTANCE BETWEEN COLUMN 1700 X Y AND Z AXIS HAVE OPTIC SCALE X Y AND Z ROLLER TYPE LINEER MANUEL UNIERSAL SPINDLE HEAD TOLL MAGAZINE 32 LOCATION EUROPE SIDE OF ISTANBUL CAN BE CHECKED UNDER POWER

Condition: good (used), Year of construction: 2016, operating hours: 17,000 h, functionality: fully functional, FOR SALE 5-Axis Machining Center – DMG MORI DMU 95 monoBLOCK® YEAR 2016 Description: Selling a DMG MORI vertical 5-axis simultaneous machining center (Deckel Maho Pfronten GmbH), year 2015. A versatile, highly rigid, and well-equipped professional machine. Suitable for complex and high-precision machining operations. Can be viewed powered on and in operation on site. Main Features: • Numerical Control: HEIDENHAIN TNC 640 (ERGOline® interface) • Spindle speed max: 20,000 rpm • Hour counters: Power on: 48,878 h | Actual machining: 17,030 h • Machine weight: ~14,000 kg (14 tons) Capabilities & Machining Envelope: Bodpfxe Af Aias Aczoww • Travels: X = 950 mm | Y = 850 mm | Z = 650 mm • Max. workpiece dimensions: Ø 1,040 mm x Height 590 mm • Tilting rotary table: Ø 850 x 750 mm (Max. load 1,000 kg) • Tool magazine: 60 positions Equipment & Included Options: • HEIDENHAIN TS 649 infrared workpiece probe • BLUM laser tool measurement system • quickSET 3D geometric control kit • Remote electronic handwheel • Nozzle ring for coolant around the spindle • Safe operating mode: Mode 4 • Automatic chip conveyor & Original transformer • 3D STEP digital model of the machine included (for simulation/CAM) Conditions: • Removal, lifting, and transport are the sole responsibility of the buyer. PRICE €173,000

Condition: not inspected (used), Year of construction: 1995, travel distance X-axis: 650 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 410 mm, controller manufacturer: Mitsubishi, controller model: Meldas 50 M, overall weight: 4,200 kg, spindle speed (max.): 6,000 rpm, spindle nose: SK 40, Vertical Machining Center Manufacturer: LEADWELL Model: VMC 25 Year of manufacture: 1995 Control: Mitsubishi Meldas 50 M Technical specifications: - X-axis travel: 650 mm - Y-axis travel: 410 mm - Z-axis travel: 410 mm - Max. spindle speed: 6,000 rpm - Tool holder: SK 40 - Machine weight: approx. 4,200 kg - Dimensions (L x W x H): approx. 2,400 x 2,400 x 2,500 mm Condition: used, untested In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are included in the scope of delivery only if noted in the additional information. Bwedpjzz S R Uofx Aczow Subject to technical changes, errors, and prior sale.

Condition: good (used), Year of construction: 2011, Haas VF-3YT/50 vertical machining center, manufactured in 2011. Bwodpj Ahxqyjfx Aczew

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, workpiece length (max.): 2,800 mm, workpiece width (max.): 850 mm, number of slots in tool magazine: 13, actuation type: electric, total height: 1,895 mm, total length: 2,920 mm, total width: 1,890 mm, overall weight: 1,580 kg, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, The Drillteq V-200 is in continuous use, which means the number of parts being processed is increasing. The machine is in good condition and is regularly serviced. For more information, please call 601 548 875. Bwsdpfx Ace Afm Itjzjw

Condition: used, Year of construction: 2009, This DECKEL vertical CNC machining center, type: Maho DMC 635 V, will be auctioned off in our industrial auction / machine auction, which includes liquidation of industrial machinery – injection molding machines, CNC machining centers, universal lathes, and more – online. Bjdpfe Agku Hjx Aczeww You can find this and many other items on our platform.

Condition: excellent (used), Year of construction: 2016, operating hours: 6,900 h, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 760 mm, workpiece weight (max.): 1,350 kg, operating hours of spindle: 5,500 h, Equipment: chip conveyor, DEPO/ZPS MCV 1060 | 3-axis Heidenhain TNC 640 SK40 (white spindle) External coolant (water). Bodpfsu Db Hxjx Aczjww Air through the spindle. 30-position tool changer. Very good condition! Flexible payment terms. Available immediately!

Condition: new, Year of construction: 2026, functionality: fully functional, turning height: 2,300 mm, workpiece weight (max.): 12,000 kg, turning diameter over cross slide: 2,650 mm, turning diameter: 2,700 mm, faceplate diameter: 2,000 mm, total height: 7,100 mm, total width: 5,500 mm, total length: 8,500 mm, rotary table diameter: 2,000 mm, rotational speed (max.): 250 rpm, rotational speed (min.): 1 rpm, spindle speed (min.): 5 rpm, spindle speed (max.): 2,500 rpm, table load: 12,000 kg, table diameter: 2,000 mm, warranty duration: 24 months, overall weight: 63,000 kg, faceplate torque: 43,000 Nm, repeat accuracy: 0.015 mm, REM SCR 27 1SF — CNC Vertical Turning & Milling/Drilling Center 🔴 MACHINE CURRENTLY UNDER ASSEMBLY — DELIVERY MAX 3 MONTHS 🔴 24-MONTH WARRANTY — LONGEST IN ITS CLASS 🔴 UNBEATABLE PRICE FOR EUROPEAN CNC QUALITY ━━━━━ MACHINE HIGHLIGHTS ━━━━━ ✓ Complete turning + milling + drilling in ONE setup ✓ 12-Station ATC — bi-directional, 30 sec tool change ✓ Live spindle ISO 50 — 5 to 2,500 RPM | 37 kW ✓ C-Axis for full contour milling ✓ FANUC 0i-TF PLUS CNC — global support ✓ Heidenhain absolute measuring system (X: LC 195F) ✓ CE certified, full enclosure 3,300mm height ✓ Heavy-duty Meehanite cast iron structure Bsdpfxezb Ufvo Aczsww ━━━━━ TECHNICAL SPECIFICATIONS ━━━━━ • Max Machining Diameter: 2,650 mm | Swing: 2,700 mm • Max Machining Height: 2,300 mm • Table Diameter: 2,000 mm (8 T-slots + 4 clamping jaws) • Max Workpiece Weight: 12,000 kg • Table Speed (turning): 1–250 RPM • Main Motor: 100 kW FANUC servo | Torque: 43,000 Nm • Ram Cross Section: 250×250 mm • X/Z Rapid Feed: 10,000 mm/min | Feed: 0.02–6,000 mm/min • X/Z Thrust Force: 35,000 N • ATC: 12-station disc | Max tool Ø 300mm | L 400mm • Coolant: 2,000 L tank | External 10 bar | Through-spindle 40 bar • Chip Conveyor: SARIGÖL hinged, 500mm wide • Accuracy: ±0.020 mm/m | Repeatability: ±0.015 mm • Electrical: 400V/50Hz | 140 KVA | Fanuc 0i-TF PLUS • Weight: 63,000 kg | 8,500×5,500×7,100 mm ━━━━━ IDEAL APPLICATIONS ━━━━━ Large gear blanks | Ring gears | Wind energy hubs & rings Heavy castings & forgings | Oil & gas flanges Mining equipment components | Aerospace large parts ━━━━━ COMMERCIAL TERMS ━━━━━ Delivery: MAX 3 MONTHS from order Warranty: 24 MONTHS parts + labor Incoterms: EXW Bacău, Romania Payment: 50% advance + 50% before shipment Installation & commissioning: included Manufacturer: REM Bacău, Romania

Condition: not inspected (used), Year of construction: 1992, travel distance X-axis: 1,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 700 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 60 m/min, feed rate X-axis: 3 m/min, feed rate Y-axis: 3 m/min, feed rate Z-axis: 3 m/min, table width: 700 mm, table length: 1,250 mm, spindle speed (min.): 20 rpm, spindle speed (max.): 3,200 rpm, Vertical Machining Center Manufacturer: MAHO Model: MH 1000 E Year of manufacture: 1992 Bwsdszz S Rhepfx Aczjw Technical details: X-travel: 1000 mm Y-travel: 500 mm Z-travel: 700 mm Table clamping surface: 1250 x 700 mm Spindle speed: 20 – 3,200 rpm Main drive motor: 22 kW Quill stroke: 100 mm Distance spindle head to table (min./max.): 138/600 mm Feed rate (X / Y / Z): 3,000 mm/min Rapid traverse (X / Y / Z): 60/50/60 m/min Total power requirement: 27 kW Used; sold without warranty Machine transport dimensions (LxWxH) approx.: 3900x2560x2550 mm Transport dimensions pallet/sheets (LxWxH) approx.: 1500x12000x600 mm Accessories, tools, and clamping devices shown are included in the scope of delivery only if noted in the additional information. Subject to technical changes, errors, and prior sale.

Condition: used, Year of construction: 2014, We offer this used Hartford LG-500 vertical machining center, built in 2014. Manufacturer: Hartford Model: LG-500 Machine type: Vertical machining center Year of manufacture: 2014 System: O.T.-MD System number: T14701342 Bsdpfx As Agcwpoczoww If you have any questions or need more information, feel free to send us a message or give us a call.