Used Vertical Boring Mill for sale (17,649)

Condition: used, Year of construction: 2012, x-travel 635 mm y-travel 510 mm z-travel 460 mm table surface area 790 x 560 mm spindle taper SK 40 spindle turning speed - stepless 20 - 12.000 U/min spindle drive 13 kW max. torque on the spindle 83 Nm feeds x/y/z -stepless bis 20.000 mm/min rapid traverse 30 m/min ATC 20 Pos. tool diameter if 2 vacant positions 130 mm tool diametre at full load 80 mm tool length - max. 300 mm weight of tools max. 6 kg Cgodpfx Aex Nqu Defpon internal coolant system feed 12 bar control HEIDENHAIN, TNC 620 total power requirement 17 kVA weight of the machine ca. 3,9 t dimensions of machine L x W x H 3,0 x 1,92 x 2,35 m Accessories: probe HEIDENHAIN, TS 460; electron. hand panel, chip conveyor, coolant

Condition: used, Year of construction: 1995, x-travel 650 mm y-travel 410 mm z-travel 410 mm Control Mitsubishi Meldas 50 M max. turning speeds 6.000 min/-1 tool taper SK 40 In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Cgodpfx Aex Iwg Refpjn Subject to changes and errors in the technical data and information as well as prior sale!

Condition: used, Year of construction: 2008, x-travel 600 mm y-travel 450 mm z-travel 300 mm spindle tunring speed 42.000 U/min Cgsdpfx Afox Iwg Dopjn In our opinion, the machine is in good used condition and can be inspected under power by appointment. Equipment: - Extraction system, Keller - Pallet system, Röders RC 2 Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: used, Union KCU-130 Table Type Horizontal Boring Machine Year 2001 Condition Used Serial Number 1370022 (2001) X/Y/Z 4000/3000/1500mm Table Size 2000 x 2500 x 20,000kgs Cedoyb Ag Ispfx Afpjgn Spindle Taper BT50 Heidenhain TNC430 Control, B-axis 360 Deg, 60 Position ATC, W-axis, U-axis, Swarf Conveyor, Through Spindle Coolant, Right Angled Milling Att. Guarding Enclosure

Condition: used, Year of construction: 1981, year of last overhaul: 2007, Machine after CNC modernization - control system MEFI CNC 872 - 3 continuously controlled axes. Videos of the machine in operation and an accuracy protocol (very precise) are available. X-axis: 3500 mm Y-axis: 2000 mm Z-axis: 1250 mm W-axis: 800 mm Spindle: 130 mm, ISO 50 Spindle speed: 800/min. Table clamping size: 1600x1800 mm Cgedpfex Rb Rrjx Afpon

Condition: good (used), Year of construction: 1996, Travel X/Y/Z 600/500/450 mm, Control HEIDENHAIN TNC 410 PA, spindle power 9,0 KW, spindle speed 5-6300 rpm, ISO40, table size 530x900 mm, max. table load 400 kg, tool changer 22 places, dimension 2200x2700x2050 mm, ca. 3550 kgs, accessoires Renishaw tool prove, 4th axis TRIAG with clampings, Software updated, flat screen, radio data transfer installed, tool holders, manuals Cedpfxjqagugs Afpegn

Condition: used, Year of construction: 1996, functionality: fully functional, total length: 2,050 mm, total width: 1,020 mm, total height: 2,820 mm, overall weight: 3,050 kg, rotational speed (max.): 1,480 rpm, Offered are two ball mills, model Cobra 751, from manufacturer Bühler. Both machines come together with a pre-mill (model SRK-690) from the same manufacturer. All machines are in used condition but are fully operational. All machines comply with up-to-date safety standards. An inspection of the machines is possible upon request and by appointment. Cgsdjxldumepfx Afpjn We are available for any further questions. The stated price is for one pre-mill and one ball mill together, not for all 4 machines!

Condition: used, Year of construction: 2009, spindle diameter 125 mm x-travel 1.500 mm y-travel 1.250 mm z-travel 1.000 mm w-travel 550 mm table surface area 1.000 x 1.250 mm workpiece weight 6.000 kg Cjdpjwdta Eefx Afpegn quill stroke 550 mm tool taper ISO 50 number of spindle speeds 5-3.700 U/min. max. torque 2012 Nm feed speeds 1-6000 (x-Achse) mm/min feed speeds 1-6000 (y-Achse) mm/min feed speeds 1-6000 (z-Achse) mm/min rapid traverse x/y/z 15/ 15/ 15 m/min dimensions of the machine ca. 7,51 x 5,07 x 3,33 m 63 kVA Equipment/ Accessories: - CNC control Siemens 840 D - 60 ATC - Coolant system with high-pressure pump 30 l/min.- 20 bar - documentation

Condition: used, Year of construction: 1998, functionality: fully functional, SECOND-HAND HIGH SPEED VERTICAL MILLING MACHINE CAMAM MOD. FV/1T-1P - Volt. 380/50 Cjdpex Rdhtefx Afpsgn - CE rules - Year 1998

Condition: good (used), travel distance X-axis: 3,500 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,250 mm, spindle diameter: 130 mm, travel distance W-axis: 800 mm, CNC Boring Mill TOS VARNSDORF Technical Specifications Brand: TOS VARNSDORF Model: WHN 130 CNC: Heidenhain ITNC 530 Year: 1999 / Fully Retrofitted 2014 X: 3500 mm Y: 2000 mm Z: 1250 mm W: 800 mm Cjdpfsx Tfngjx Afpegn PRICE AND FURTHER INFORMATION ON REQUEST (CNC, SIEMENS, HAAS, LAGUN, FAGOR, CINCINNATI, HEIDENHAIN, Machining, PINACHO, MORI SEIKI, Milling Machine, Lathe, Grinding Machine, Boring Mill, Press, Laser, Shear, Press Brake)

Condition: used, Year of construction: 2003, travel -x axis 1.200 mm travel -y axis 900 mm travel -z axis 500 mm control HEIDENHAIN tool taper SK 40 milling spindle dia. in forward position 70 mm table surface area 1.400 x 900 mm Milling machining centers - vertical | HERMLE - C 1200 V equipped with tool changer. The machine is in a well-maintained condition. Csdpox E Dr Iefx Afpogn Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: C1200 V | C-1200 V | C 1200-V | C1200V

Condition: used, Year of construction: 2001, Union KCU-130 Table Type Horizontal Boring & Milling Machine with Heidenhain TNC430 Control, X/Y/Z = 4000/3000/1500mm, Table Size 2000 x 2500 x 20,000kgs, B-axis 360 Deg, Spindle Taper BT50, 60 Position ATC, W-axis, U-axis, Swarf Conveyor, Through Spindle Coolant, Guarding Enclosure. S/No. 1370022 (2001) Cgedpfjx T Ddyox Afpen Please Note: Toolholders/Tooling photographed in the toolchanger will not be supplied with this machine. Any available tooling will be a specifically described. Please Note: This Lot is located in Irvine. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: good (used), Table size: 1100 x 1300 mm Cjdpfxoh T T Aqe Afpogn range of movement: 1300x1300mm spindle movement: 500mm

Condition: refurbished (used), Year of construction: 2008, WFL Millturn M120X/3000 WORKING RANGE centre distance = 3000mm Swing over bed = 1220mm Swing over slide top = 1140mm Longitudinal travel (Z) = 3330mm Face travel (X) = 920mm Distance spindle nose to tailstock tip = 3812mm ROTATING SPINDLE Spindle head DIN 55026 form size A15 spindle bore 165mm MAIN DRIVE AC-drive with 2-stage gearbox Drive power 100% ED 60kW Max. Spindle speed 1600 1min Max. Spindle torque 100% ED 4472 NM C-AXIS. SERVO-CONTROLLED MAIN SPINDLE Smallest programmable increment 0.001°. Max. Speed 20min-1 Max. Torque on spindle 100% ED Nm 3000 Holding torque of disc brake Nm 6000 FEED DRIVE Cross slide, rotary drilling-milling unit: AC servo drive Feed force longitudinal (Z) kN 30.0 Feed force plane (X) kN 31,5 Feed force Y-axis 55kW kN 25.0 Rapid traverse speed: longitudinal (Z) m/min 15.0 plane (X) m/min 15.0 Y-axis m/min 12.5 Rapid traverse B-axis °/s 90 BALL SCREW LENGTH (Z axis) ø x pitch mm 63X20 PLAN (X-axis) ø x pitch mm 63X10 RIDGE STOCK Quill diameter mm 180 Quill stroke mm 200 Quill force (adjustable) N 5400-40000 Quill with built-in bearing MK 6 TOOL CARRIER (single tool carrier, rotary drilling-milling unit) AC drive, drive power 100% ED kW 55 Spindle speed max. min-1 3200 Max. Torque at spindle 100% ED Nm 730 Travel perpendicular to X/Z plane (Y axis) 55kW mm 650(-300/+350) Tilting angle of the milling spindle (B axis) ° -110/+90 Spindle head for tools according to DIN 69893 HSK-A100 Milling spindle diameter in front bearing mm 130 TEMPERATURE STABILISATION through controlled cooling circuit with compressor - cooling unit EXTERNAL TOOL MAGAZINE: Number of Codpfjl Smhlox Afpsgn Storage spaces (space-coded) Size HSK100 pcs 90 Max. Tool length mm 500(800) DIMENSIONS Length(max. tool magazine with chip conveyor) m 13 Height m 4,1

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 30214501, turning length: 2,000 mm, total length: 12,000 mm, WFL Millturn M60/2000 Cgjdpfx Aeu Hl R Tofpjn WORKING RANGE center distance mm 2000 swing over bed, turning diameter mm 690 MAIN DRIVE AC-drive with 2 gear steps drive power 100% duty cycle kW 40 max. speed min-1 3300 max. torque at the spindle 100% duty cycle Nm 1830 TAILSTOCK quill diameter mm 140 quill travel mm 160 quill force (adjustable) N 3500-31000 quill with installed live center MK 5 TOOL HOLDER (single tool holder, turning-boring-milling unit) AC-drive drive power 100% duty cycle kW 30 speed range max. min-1 6000 max. torque at the spindle 100% duty cycle Nm 315 travel vertical to the X/Z-plane (Y-axis) mm 300[-125/+175] pivot capability of the milling spindle (B-axis) ° -110/+90 spindle head acc. DIN 69893 HSK-A100 spindle diameter in front bearing mm 100 DIMENSIONS length (max. tool magazine) m 11 width/height m 3,9/3,3

Condition: good (used), VEB Fritz Heckert FU 250x1000 milling machine Manufacturer: VEB Fritz Heckert Type: FU 250x1000 Codpfotryc Njx Afpjgn X-axis: 900 mm Y-axis: 300 mm Z-axis: 380 mm Speed: 28-2800/min Speed: 10-630 mm/min Dimensions: 1240 x 340 mm Speed: 6 kW, 35 A Load: 1.7 t Dimensions: 1580 x 1420 x 1470 mm

Condition: used, Year of construction: 2017, travel -x axis 1.050 mm travel -y axis 530 mm travel -z axis 510 mm control MAZATROL Smooth G Cgodpjx Avr Eofx Afpsn number of spindle speeds 40 - 12.000 U/min tool taper SK 40 numbers of positions in the tool changer 30 table-size 1.300 x 550 mm Milling machining centers - vertical | VCN-530C - 2017 The machine is in a well-maintained condition and can be inspected under power at any time in the factory location. The machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VCN530C | VCN-530 C | VCN 530C | VCN 530 C

Condition: used, CNC Vertical Machining Center HURCO Type BMC 25/M Serial No: ZB9-001-052 Year of manufacture: approx. 1995 Travel distances X: 610 mm, Y: 410 mm, Z: 560 mm Table size (clamping surface) 845 x 400 mm Table size (with coolant groove) 1050 x 500 mm Spindle taper SK 40 Distance spindle nose - table 155 - 710 mm Table load capacity max. 500 kg Overhang 420 mm Spindle speed max. 10,000 rpm Feed rate 3 to 5080 mm/min Cgjdjw Nklhjpfx Afpon Rapid traverse 10 m/min Spindle drive approx. 5.5 kW Power supply 400 Volt, 50 Hz - CNC path control Ultimax 3 with two TFT monitors - Electronic handwheel - Indirect measuring system with rotary encoders on the ballscrew - Tool changer with 20 tool stations - Full enclosure with sliding door - Swiveling control panel - Yaskawa (Japan) spindle drives - Pneumatic-mechanical tool clamp - Without coolant system – pump included – coolant tray missing Machine width 2400 mm Space requirement for transport L x W x H = 3000 x 2400 x 2650 mm Weight 4200 kg Good condition

Condition: used, CNC Vertical Machining Center HURCO Type BMC 30/M Serial No: B3M92202056AB : 9650234 Year of construction 1996 CNC path control Ultimax 3 Travel X: 760 mm, Y: 460 mm, Z: 610 mm Table size (clamping surface) 1010 x 400 mm Table size (with water groove) 1120 x 500 mm Spindle holder SK 40 Distance spindle nose - table 150 - 760 mm Projection 450 mm Spindle speed 80 to 8000 rpm infinitely variable Feed rate 3 to 16,000 mm/min. Rapid traverse 24 m/min. Spindle drive 7.5 kW at 30 min / 5.5 kW at 100% Mains connection 400 Volt, 50 Hz - CNC path control Ultimax 3 (with hardware update e.g. TFT monitors) - Electronic handwheel - Indirect measuring system with rotary encoders on the ball screw spindle - Tool changer with 24 tool positions - Fully protected cabin with sliding door - Rotating control panel - spindle drives Yaskawa (Japan) - pneum. mechanical tool clamp - Coolant unit adjacent, pushed under from behind - trough rinsing Cgjdpfx Ajtrhq Hsfpen Machine width 2400 mm Space required for transportation L x W x H 3400 x 2400 x 2550 mm Weight approx. 4800 kg good condition

Condition: used, Year of construction: 2019, x-travel 2.000 mm y-travel 820 mm z-travel 720 mm Control Mazatrol Smooth G spindle taper SK 40 spindle turning speed range 35 - 12.000 U/min spindle motor 22 kW distance spindle centre table top edge 140 - 860 mm table load 1700 Kg rapid travel x/y/z 50 m/min table width 820 mm table length 2500 mm table height over floor 870 mm T-slots 7 T-slot - width 18 mm T-slot - distance 100 mm tool change unit 48 tool changing time 4,7 sec wotkpiece diameter with 2 vacant positions 130 mm workpiece diameter at full load 80 mm max. tool weight 8 kg tool length - max. 350 mm air pressure - required 5 - 9 bar Air volume 260 l/min electrics - voltage/frequency 400 / 50 V/Hz coolant tank 450 l high-performance coolant system 25 bar total power requirement 46,7 kW weight of the machine ca. 14,8 t dimensions of the machine ca. 4,3 x 3,6 x 3,1 m STANDARD ACCESSORIES Transformer for the European market USB port (1 port) Mazak standard colour Cgedpfx Aotuggcjfpsn Spindle speed 12,000 min-1 (steep taper 40) Work area lighting SAFETY DEVICES Operator door with locking switch Work area panelling The splash guard encloses the working area from the side. Fully enclosed work area Protection against chips, coolant and access to the work area during automatic machining. Safety precautions in accordance with global standards COOLANT SUPPLY Coolant supply through spindle (pressure at the pump = 5 bar) Complete coolant system includes pumps, valves, pipework and nozzles for the efficient production of quality components. FACTORY AUTOMATION Automatic switch on/off and warm-up function Automatic switch-on of a warm-up cycle via digital timer MEASUREMENT SYSTEM Tool length measurement and tool breakage detection CHIP DISPOSAL Factory preparation for chip conveyor (left) NUMERICAL CONTROL Fixed control/operating unit Relocation Detector Mazatrol SmoothG control unit 19" LCD colour screen (touch screen) Mazak tapping/drilling cycle Tornado (Mazatrol) By drilling and tapping in helical machining mode, a wide range of diameters a wide range of diameters can be machined at high speed with a wide range of diameters can be machined at high speed with just one tool. This function minimises programming and machining times. EIA/ISO input function Tool path check in the background The tool path of a programme can be checked even if another programme number is programme number is called up and processed in automatic mode. 3D coordinate conversion Shape compensation for rotating axes Mazacc 2D software (contour correction) Accuracy is maintained at high feed rates. Mazacc-3D software package for high-speed machining High-speed and high-accuracy machining for contours defined in the finest programme contours defined in the finest programme increments. MAZACC-3D high-speed software package (NO456) is additionally required. Control with high smoothing Interface for LAN SD Memory Card I/F Smooth standard software for M/C - NO443 B) MAZACC-2D software (workpiece shape compensation) - NO444 D) MAZACC-3D high-speed software package - NO445 B) Shape compensation for rotating axes - NO497 D) High accuracy control for finishing operations - Seamless corner point control - Variable acceleration control - Ultra high speed machining mode - NO498 Rapid traverse paths Rounding function Absolute positioning system Machine incl. the f...

Condition: used, Vertical milling head, milling head, angle milling head MAHO suitable for MH300 or MH400. Year of manufacture approx. 1990. Tool holder: SK 40. Quill stroke: 60 mm. Centering diameter on the flange plate: 102 mm. Outer diameter of flange: 180 mm. Bolt circle on flange plate: Ø 150 mm. Mounting holes on flange plate: 4x Ø 11 mm. - Quill feed: 0.015 / 0.03 / 0.06 / 0.12 mm/rev. - Head drive via shaft Ø 32 with 10 mm keyway. - Knurled wheel with scale for quill stroke. - Angle scale on angle milling head 2x 90°. Dimensions L x W x H: 300 x 280 x 300 mm. Total weight: 31.4 kg. In good condition. Cjdpfxexf Ur No Afpsgn

Condition: new, Year of construction: 2025, functionality: fully functional, travel distance X-axis: 375 mm, travel distance Y-axis: 230 mm, spindle speed (max.): 1,700 rpm, spindle speed (min.): 115 rpm, type of input current: three-phase, overall weight: 200 kg, table length: 700 mm, table width: 190 mm, power: 0.75 kW (1.02 HP), distance table to spindle center: 405 mm, WMD32G - ROGI Gear-Driven Milling and Drilling Machine Drilling Capacity ----- 32 mm Face Milling Capacity ----- 63 mm End Milling Capacity ----- 16 mm Work Table Dimensions ----- 700 x 190 mm T-Slot Dimensions ----- 12 mm Spindle Taper ----- ISO30 Csdpfx Aex N Ndqofpegn Max. Distance Spindle - Table ----- 405 mm Spindle Travel ----- 75 mm Head Tilting ----- Left / Right 45 Degrees Table Longitudinal Travel ----- 375 mm Table Cross Travel ----- 230 mm Speed Range 115 - 1700 rpm Weight ----- 200 KG Motor ----- 750W AC Voltage ----- 230V (INVERTER) INCLUDES * 3-axis digital readout SINO * Floor stand * Digital depth stop * ISO30 milling arbor including 6 collets * Drill chuck with shank DIN2080 / ISO30 * Left / Right switch * Spindle guard * Drift key

Condition: good (used), Manufacturer: WMW VEB Tip: FW 200×630 x-y-z: 380 - 140 - 230 mm. Table size: 200x630mm Cedpeik Hcuefx Afpogn

Condition: used, Year of construction: 2017, x-travel 550 mm y-travel 400 mm z-travel 400 mm Cgsdpfx Afexzk N Ajpjn weight of the machine ca. 9000 kg

Condition: used, Year of construction: 2006, x-travel 760 mm y-travel 610 mm z-travel 610 mm control Heidenhain 530 Cgedpfx Afoxbtnbspon weight of the machine ca. 6700 t