Used Vertical Plate Saw for sale (24,731)

Condition: excellent (used), Velo Kieselgur filter vertical 10 m2 used in beverage industry, in very good condition. Complete with wiring and control desk. Chjdpfx Asq U A Huebzed

Year of construction: 2021, operating hours: 5 h, condition: new, functionality: fully functional, Vertical packaging machine for packaging smaller goods. Chicken strips, chicken wings, tea, granules and the like. The machine was not used at all. Cjdpfx Abjurry Rozshd

Condition: used, Contactor, semiconductor contactor, contactor -Max. 11 kW 660 V Chsdpfxob A N Ale Abzed -Price: per piece -Number: 180 pieces available -Weight: 0.5 kg

Condition: used, Tilting heads. All with safety lock out switches. 30mm blades. Very strong machine. Comes complete with own saw doctoring equipment. New set of blades. Many spares. This machine is far superior than most other narrow band saw horizontals. Machine has been fitted with all new power feed rollers. Last production was Oak F/E boarding FOM. Codpfovlfk Tsx Abzshd

Condition: used, functionality: fully functional, machine/vehicle number: 7FBMF35-16267, Year of construction: 2013, operating hours: 6,500 h, load capacity: 3,000 kg, lifting height: 4,700 mm, fuel type: electric, mast type: triplex, Electric Forklift Truck – Toyota Year of manufacture: 2013 Technical data: • Model: Toyota 7FBMF30 • Load capacity: 3,000 kg • Drive: Electric (battery powered) • Mast type: Triplex with free lift • Lift height: approx. 4,300 – 4,800 mm • Fork length: 1,070 mm (standard) Chedpfxow Hhwwe Abzsd • Tyres: Solid rubber • Cabin: Open design, optionally with driver protection roof • Condition: Used, serviced and fully functional

Condition: excellent (used), functionality: fully functional, overall weight: 50,000 kg, total height: 5,400 mm, total width: 4,500 mm, total length: 14,000 mm, feed length X-axis: 800 mm, rotational speed (max.): 80 rpm, 80 blade gang saw with top quality of cutting easily reaching C120 surface, so no honing is required. Blade stroke: 800 mm. Blades number: 80 Blade length: 4,350 mm. Motor power: 110 kW Cycles per minute: 85 Voltage: 400v/50hz Csdpfx Ajv D Napebzehd Machine weight: 54,000 Kg. Useful cutting side: 3,200 x 2,000 x h 2,000 mm. Overall dimensions: 13,600 x 4,500 x h 5,400 mm. With n.2 block trolleys. More data or pictures upon request. Machine is fully functioning and in top condition.

Year of construction: 1998, condition: excellent (used), Kap Saw Reinchardt NC 700 automatic Manufacturer Reinchardt Model / machine type NC 700 Year of production 1998 Machine category Kapła Kapowa Location Gorzów Wlkp. Conditions of delivery Cedpfjd H Hmhox Abzohd OWN RECEIPT Cost of delivery Customer cover Start type to be agreed Description Comments CUTTING SAW FOR CUSTOMIZED DIMENSIONS, ACCURACY UP TO 1MM, NEW CONTROLLER, SAW BLADDER BY HYDRAULIC AGREEMENT

Condition: used, Cast iron bed Length: 3300 mm Width: 2000 mm Thickness: 240 mm 8 T-slots T-slots dimensions: 55 x 35 mm Slots spacing: 250 mm Equipped with 20 leveling feet Weight: approx 5,5 T Chodpfjww H Ntjx Abzjd

Condition: used, Year of construction: 2004, functionality: fully functional, cutting width (max.): 400 mm, cutting length (max.): 6,000 mm, total width: 5,400 mm, total length: 13,500 mm, total height: 2,500 mm, saw blade diameter: 800 mm, type of input current: three-phase, rotational speed (max.): 800 rpm, DePauw QCUWSCNC18 Double Cut Cross Saw, manufactured in 2004. Fully functional and well maintained, suitable for immediate use in production. Cutting width: 400 mm Cutting length: 6,000 mm Total machine dimensions: 13,500 mm (length) × 5,400 mm (width) × 2,500 mm (height) Rear saw blades: 800 mm diameter, maximum speed 1,500 rpm Front saw blades: 500 mm diameter, maximum speed 3,000 rpm Saw type: Double Cut Cross Saws Condition: Used, fully operational. Location: Cork, Ireland Delivery available at buyer’s expense. Price: €25,000 Contact for more details or to arrange a viewing. Chodpfsw Nbhmox Abzjd

Condition: used, functionality: fully functional, A homogenizer is the machine that enables the size reduction of globules and fat particles of food products. In other words, it reduces variations in two heterogeneous substances, makes them uniformly consistent and reduces separation after mixing. As a result, we obtain particles of micrometer and nanometer size. This size will always depend on the characteristics of the product in question and the results we seek to achieve. Homogenizers stabilize fat emulsions and disperse solids in aqueous solutions. In this way, we avoid that with the difference in density, some parts of the mixture remain on the surface and others precipitate to the bottom. Chodpfx Aownx H Esbzjd

Year of construction: 1997, condition: repair required (used), Mortising machines Maka Db-6 v Second hand 1977 Make: Maka Model: Db-6 v Description: VERTICAL MORTISER MAKA DB-6 V Year of construction: 1977 Machine condition: very good afer repairs capital Offertype: used machine offer Location: Poland Technical data: AFTER REPARIRS VERY IMPORTENT VERTICAL Year: 1977 Chedpfefd Rxqox Abzjd

Condition: good (used), Marble plate Length: 3500 mm Width: 1500 mm Thickness: 300 mm Height on feet: 930 mm Number of feet: 5 feet 1 small failure on the top (L 150 mm x W 20 mm) - see photo Weight: approx 3 T Chedoig Hu Nepfx Abzed

Year of construction: 2005, condition: as good as new (ex-display), ACCEPTANCE OF SELF feed head is held on the guides of hardened cylindrical surface and additionally treated grinding. Three-phase motor power 3HP 2800 rpm / min. Output frontal saw blades with cutting heads. Feed discs cost of delivery cover customer Startup type negotiated Description Notes Chedsb Rnv Sjpfx Abzsd Saw 2 a head for precision cutting of aluminum profiles GAMMA. Precise double miter saw for serial production of blanks at an angle of 90 ° and 45 °. Convenient and safe execution of multiple cutting operations. Automatic positioning of the moving cutting head. Automatic positioning of the moving cutting head. Adjustable stroke discs. The angles of inclination of the cutting head 45 °, 90 °, easy pneumatically. Intermediate angles are adjusted manually using the bumper and angular scale. LENGTH OF CUT = 4000 5220 x 1390 x 1460 mm Weight 1200 kg.

Condition: used, Cast iron bed Length: 2300 mm Width: 1900 mm Thickness: 200 mm Height on feet: 980 mm 5 T-slots horizontal and vertical T-slots dimensions: 60 x 35 mm Cjdpfx Abswtc Hgozohd Square dimensions: 365 x 365 mm Crack at a longitudinal T (see photo) Weight: approx 3 T

Condition: used, Cast bed Length: 2410 mm Width: 1500 mm Thickness: 550 mm 8 T-slots 50 x 27 mm with 2 opening (possibility to close them) 1 opening L 560 x W 500 mm Codpfxjwnfz Nj Abzjhd 1 opening L 480 x W 360 mm Weight: approx 5 T

Condition: used, Cast iron bed 2600 x 2000 x 350 mm Length: 2600 mm Width: 2000 mm Chsdewlhfljpfx Abzod Thickness: 350 mm 8 T-slots T-slots dimensions: 55 x 35 mm Slots spacing: 250 mm Equipped with 12 leveling feet Weight: approx 4,5 T

Condition: used, Cast iron bed 2600 x 2000 x 350 mm Length: 2600 mm Width: 2000 mm Thickness: 350 mm 8 T-slots T-slots dimensions: 55 x 35 mm Slots spacing: 250 mm Equipped with 12 leveling feet Chodpfx Aowlhd Usbzsd Weight: approx 4,5 T

Condition: ready for operation (used), Year of construction: 2015, The StyleShoots Vertical is a product photography rig with built-in lighting, tablet-based control, and a Canon EOS 5D Mark III. Length: 4100mm, width: 2050mm, height: 4100mm, very little documentation available, an inspection is possible. Chodpfeqpgg Tjx Abzjd

Condition: excellent (used), Year of construction: 2001, Type: Horizontal / Vertical Chodpfettzfcsx Abzjd Serial number: 61937 / 61938 Year of construction: 2001 Diameter: 250 mm Pitch: 190 mm Infeed height: 1000 mm Outfeed height: 2150 mm Power: 3 x 400V, 50Hz, 15kW Dimensions: 3800 x 1200 x 3200 mm Screw conveyor with turnable outfeed shute

Condition: ready for operation (used), Year of construction: 2008, operating hours: 792 h, functionality: fully functional, travel distance X-axis: 1,400 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 700 mm, table width: 800 mm, table length: 1,500 mm, TECHNICAL DETAILS X-axis travel: 1,400 mm Y-axis travel: 800 mm Z-axis travel: 700 mm Table length: 1,500 mm Table width: 800 mm Tool holder: ISO50 Tool magazine capacity: 32 tools Max. spindle speed: 12,000 rpm Maximum tool weight: 8 kg Maximum tool length: 300 mm Maximum tool diameter: 90 / 125 mm Tool change time: 2.5 s Chip-to-chip time according to ISO 10791-9: 4.5 s Rapid traverse X + Y axis: 15 m/min Rapid traverse Z axis: 12 m/min Working feed rate: 1 – 8,000 mm/min Feed motor X + Y axis: 3.0 kW Feed motor Z axis: 4.0 kW Ball screw X + Y + Z axis: 45 mm MACHINE DETAILS Control model: Fanuc 18i-MB Power: 15 kW Number of axes: 3 Dimensions & Weight Chodpfxjxrbuqe Abzod Dimensions (L x W x H): 4,700 x 2,900 x 2,800 mm Weight: 12,000 kg Operating hours: 792 h EQUIPMENT Chip conveyor Documentation CE marking Internal cooling

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 035-110235, saw blade diameter: 650 mm, cutting height (max.): 245 mm, rotational speed (max.): 2,800 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Saw blade diameter: 650 mm Maximum cutting height: 245 mm Speed: 2,800 rpm Bore diameter: 30 mm Riving knife thickness: 5.4 mm Kerf width: 13 mm Saw blade height at 90 degrees: 245 mm Saw blade height at 45 degrees: 164 mm Saw blade height at 30 degrees: 113 mm Type of input power: Three-phase MACHINE DETAILS Motor power: 10 kW Motor speed: 3,000 rpm Electric saw blade tilt: 90° - 30°, with digital display Rotary table range: 30° - 150° Electrical Data Phases: 3 + N + PE Voltage: 400 V Frequency: 50 Hz Current consumption: 17 A Chodexpvtispfx Abzjd EQUIPMENT Automatic guarding hood Pneumatic cross feed Laser for length cutting

Condition: not inspected (used), Year of construction: 2000, operating hours: 6,191 h, functionality: unexamined, machine/vehicle number: 7158, travel distance X-axis: 1,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 46, No minimum price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20.11.2025! Bidding obligates you to timely collection between 01.12.2025 and 05.12.2025! TECHNICAL DETAILS Spindle Spindle speed: max. 15,000 rpm Tool data Tool magazine: 46 positions Tool holder: ISO-B40 Travel distances X-axis travel: 1,000 mm Y-axis travel: 600 mm Z-axis travel: 600 mm Table Csdpfx Asxm Txkobzshd NC rotary tilting table diameter: 800 mm Rotary axis Nominal speed: 3,000 rpm Holding torque (100K): 27 Nm Permissible load during transport (with clamped tilting axis): 10,000 N Rotary axis speed: 12 rpm Tilting axis Nominal speed: 3,000 rpm Holding torque (100K): 27 Nm Permissible load (5-axis operation): 5,000 N Maximum rotary axis speed: 4 rpm Control: HEIDENHAIN TNC 426 MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 5,200 x 2,900 x 3,000 mm Weight: 7,500 kg Spindle hours: 6,191 h Power-on hours: 26,997 h EQUIPMENT Technical documentation SK 40 holders ATORN 3D probe Note: The tool holders shown in the pictures are included in the sale and delivery. The tools clamped in the holders, such as drills, reamers, end mills, etc., are not included in the sale and delivery. The drive for the head tilting axis is missing.

Condition: ready for operation (used), Year of construction: 2014, operating hours: 14,076 h, functionality: fully functional, machine/vehicle number: M7759850937, travel distance X-axis: 1,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 630 mm, table width: 600 mm, table length: 1,150 mm, TECHNICAL SPECIFICATIONS Chodpfxexq A Ays Abzod X-axis travel: 1,000 mm Y-axis travel: 600 mm Z-axis travel: 630 mm Table length: 1,150 mm Table width: 600 mm Maximum spindle speed: 8,000 rpm Tool holder: BT40 Main spindle power: 12.5 kW Tool magazine: 24 positions MACHINE DETAILS Number of axes: 3 Control: HARTROL-M70 Dimensions & Weight Dimensions (L x W x H): 4,200 x 2,300 x 2,500 mm Net weight: 5,500 kg Operating hours: 14,076 h EQUIPMENT Chip conveyor Documentation CE marking

Condition: not inspected (used), Year of construction: 2000, operating hours: 8,523 h, functionality: unexamined, travel distance X-axis: 1,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 22, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20/11/2025! Bidding entails the obligation to collect the machine on time between 01/12/2025 and 05/12/2025! TECHNICAL DETAILS X-axis travel: 1,000 mm Y-axis travel: 500 mm Z-axis travel: 500 mm Table dimensions: 1,150 x 490 mm Number of tool slots in magazine: 22 Spindle taper: SK 40 (DIN 69871-A40) Max. spindle speed: 10,000 rpm MACHINE DETAILS Control: HEIDENHAIN TNC 426 Codsxn Ikwopfx Abzshd Dimensions (L x W x H): 4,500 x 3,500 x 2,700 mm Weight: 4,200 kg EQUIPMENT Technical documentation Spare parts (as shown in the photos) Note: Only a 7.5t truck can turn around on the premises. It is advisable to send a smaller truck for collection.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 260105, saw blade diameter: 800 mm, overall weight: 2,960 kg, table length: 700 mm, Equipment: CE marking, TECHNICAL DETAILS Min. saw blade diameter: 790 mm Max. saw blade diameter: 800 mm Spindle saw blade diameter: 40 mm Infeed table length: 700 mm Outfeed table length: 700 mm MACHINE DETAILS Main motor power: 15.0 kW Dimensions & Weight Dimensions (L x W x H): 3,600 x 2,550 x 2,100 mm Weight: 2,960 kg EQUIPMENT CE marking Chedpsxq Au Ajfx Abzod