Used Vertical Router for sale (7,762)

Condition: used, Year of construction: 2004, grinding wheel diameter 660 mm Control Siemens 840D Nwjdpfx Acsxq R Has Ajd work piece width min. 5 / max. 180 mm max. workpiece diameter 200 mm weight of the machine ca. 15,0 t dimensions of the machine ca. L 3,1 x B 4,0 x 2,7 m In our opinion, the machine is in good used condition. The machines were used for the production of connecting rods. Two machines are available. One machine is suitable for pre-grinding and one for regrinding. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, Year of construction: 2010, x-travel 508 mm y-travel 356 mm z-travel 508 mm table dimensions 508 x 324 mm spindle tunring speed 10.000 U/min Tool cone CAT 40 spindle drive 15 kW Nwjdpfxexyafwo Ac Ajd tool magazine 24 Stationen rapid traverse 25,4 m/min feed 18,03 m/min weight 6,5 t In our opinion, the machine is in good used condition and can be inspected condition and can be inspected under power by appointment. Operating hours approx. 20,851 hours Accessories, illustrated tools and clamping devices are only included in the scope of delivery if this is noted in the additional information . Changes and errors in the technical data and information as well as prior sale reserved. subject to prior sale

Condition: used, Year of construction: 2001, x-travel 660 mm y-travel 460 mm z-travel 500 mm table dimensions 940 x 460 mm Control Yasnac J300 spindle tunring speed 12.000 U/min tool taper BT 40 number of tool places 30 Pos. In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved. Nwjdjxxmmrspfx Ac Ajd

Condition: used, Year of construction: 2008, x-travel 600 mm y-travel 450 mm z-travel 300 mm spindle tunring speed 42.000 U/min In our opinion, the machine is in good used condition and can be inspected under power by appointment. Equipment: - Extraction system, Keller - Pallet system, Röders RC 2 Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Nwedpfx Acex Iwg Ds Aod Subject to changes and errors in the technical data and information as well as prior sale!

Condition: used, Year of construction: 1995, x-travel 650 mm y-travel 410 mm z-travel 410 mm Control Mitsubishi Meldas 50 M max. turning speeds 6.000 min/-1 tool taper SK 40 In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Nwsdpfx Acox Iwg Rs Asd Subject to changes and errors in the technical data and information as well as prior sale!

Condition: used, Year of construction: 1996, x-travel 700 mm y-travel 320 mm z-travel 270 mm turning speed range - main spindle 10 - 10.000 min/-1 drive capacity - main spindle 5 kW tool taper ISO 30 / MAS-BT table surface area 800 x 300 mm table load capacity 300 kg distance spindle /table 450 mm rapid traverse ( x / y / z ) 30 m/min Feed ( x / y / z) 5 - 10.000 mm/min number of tool places 14 Pos. tool diameter 80 mm tool length - max. 200 mm weight of tools max. 3 (gesamt 25) kg Overall size 1830 x 2950 x 2410 mm total power requirement 9 kVA The machine is defective and is being sold as a spare parts carrier. Nwedpexddvbefx Ac Aod The extraction system is NOT included in the scope of delivery. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical specifications and information, as well as subject to prior sale!

Condition: used, Year of construction: 2006, x-travel 450 mm y-travel 330 mm z-travel 350 mm control Heidenhain iTNC 530 turning speeds 42.000 U/min tool taper HSK 40 E table surface area 470 x 400 mm T-slots 5 max. table load 500 kg Number of working hours 51993 h spindle hours 13858 h Nwedpfx Aoxrg Ddsc Aod total power requirement 15 kW In our opinion, the machine is in very good condition and can be condition and can be inspected by appointment. Accessories, illustrated tools and clamping devices are only included in the scope of delivery if this is noted in the additional information . Changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, Year of construction: 2001, turning diameter 220 mm Control Fanuc 18i x-travel 390 mm z-travel 435 mm tool taper VDI 40 number of tool places 12 Pos. spindle tunring speed 4.500 U/min The machine is untested and is being sold for spare parts. Accessories, tools, and clamping devices shown are only included if explicitly Nwodpfx Acewth Sze Ajd stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: used, Year of construction: 2001, x-travel 300 mm y-travel 250 mm z-travel 251 mm Control Fanuc 16iMB max. turning speeds 15.000 min/-1 tool taper HSK-A 32 number of tool places 12 Pos. In our opinion, the machine is in good used condition and can be inspected under power by appointment. Nwedjwth Sbspfx Ac Asd Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Year of construction: 2007, condition: used, control Siemens 840D grinding wheel diameter 900 mm Workpiece - grinding width 144 - 152 mm Workpiece - grinding dimension 22 - 25 mm turning speeds 24 m/s: 1.425 U/min peripheral speed max. 25 m/sec capacity 37 kW total power requirement 75 kW weight ca. 18,0 t dimensions of the machine ca. L 4,9 x B 4,9 x H 2,6 m In our opinion, the machine is in good condition used condition. Nwedoxq Hkujpfx Ac Aod Double face side grinders The machine was used for the production of connecting rods. Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Condition: used, Year of construction: 2005, Type Honanlage Control Nagel In our opinion, the machine is in good used condition and can be inspected under power by appointment. Two machines are available. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well Nedpjxwdxiofx Ac Aswd as subject to prior sale!

Condition: used, Year of construction: 1998, x-travel 480 mm y-travel 360 mm z-travel 270 mm Control Brother turning speed range - main spindle 6 - 6.000 min/-1 drive capacity - main spindle 5 / 7 kW tool taper SK 30 table surface area 600 x 300 mm rapid traverse ( x / y / z ) 36 / 36 / 30 m/min number of tool places 14 Pos. The machine is defective and is being sold as a spare parts carrier. Nwodpfsxddvhjx Ac Ajd The extraction system is NOT included in the scope of delivery. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical specifications and information, as well as subject to prior sale!

Condition: used, Year of construction: 1998, control Siemens Sinumerik grinding wheel diameter 900 mm grinding wheel width 20-80 mm Nwodjxuv Udjpfx Ac Asd In our opinion, the machine is in good condition used condition. Double face side grinders The machine was used for the production of connecting rods. Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Condition: used, Year of construction: 2006, x-travel 1.100 mm y-travel 600 mm z-travel 560 mm Control Heidenhain iTNC 530 spindle tunring speed 12.000 U/min tool taper SK 40 Nwjdoytybyjpfx Ac Aed number of tool places 40 Pos. weight of the machine ca. 7,4 t In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Chip conveyor - 4th axis preparation - Internal coolant supply Accessories, tools, and clamping devices shown are only included if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: new, Sale exclusively within Switzerland. X-axis travel: approx. 1500 mm Njdpsywtpaofx Ac Aewd Y-axis travel: 740 mm Z-axis travel: 610 mm Distance from spindle nose to table center: 125 ~ 735 mm Table size (X-direction): approx. 1600 mm Table size (Y-direction): approx. 700 mm Table load capacity: approx. 1450 kg Spindle taper: BT 40 / BT 50 (optional) Spindle speed: Belt drive 10,000 rpm.

Condition: new, Sale exclusively within Switzerland. X-axis travel: 1400 mm Y-axis travel: 650 mm Z-axis travel: 610 mm Distance from spindle nose to table center: 125 ~ 735 mm Table size (X direction): approx. 1500 mm Table size (Y direction): 650 mm Njdpfsywtncsx Ac Aswd Table load capacity: 1000 kg Spindle taper: BT40 (BT50 optional) Spindle speed: Belt drive 10,000 rpm.

Condition: used, Year of construction: 2002, total length: 5,510 mm, total width: 1,720 mm, total height: 2,920 mm, Weight: 950 kg - Year: 2002 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Max. cutting height vertical [mm]: 2150 Nsdpfx Acjx Agv Us Aswd - Max. cutting height horizontal [mm]: 2070 - Max. cutting width [mm]: 5300 - Max. cutting depth [mm]: 80 - Min. saw blade diameter [mm]: 300 - Max. saw blade diameter [mm]: 300 - Horizontal cutting: Yes - Vertical cutting: Yes - Voltage [V]: 400 - Power [kW]: 4.0 - Transport dimensions: 5510mm x 1720mm x 2920mm (l x w x h) - Transport weight [kg]: 950kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: good (used), Year of construction: 2007, IKZ, direct path measuring system, 3D probe preparation (without probe), chip conveyor, approx. 18,500 power-on hours, approx. 500 spindle hours Technical details Travel - x 1000 mm Travel - y 500 mm Travel - z 610 mm Speed range 8000 rpm Weight 5.5 t Control HEIDENHAIN iTNC 530 Tool changer 24 positions Tool holder SK 40 Table size 1,200 x 500 mm Max. table load 850 kg Total connected load 37 kW Space requirement approx. LxWxH 2.65 x 2.1 x 2.9 Nwedpfx Aow U N Uroc Asd

Condition: excellent (used), Year of construction: 1995, Heidenhain TNC 407 SK 40 Luft Wasser Kühlung Werkzeugwechsler 22 Plätze Nwodpfogydn Iex Ac Aod Verfahrwege 600x500x450 mm Spindeldrehzahlen 5-5000 U/min Vorschubgeschwindigkeit 0-10000 mm/min Antriebsleistung Hauptspindel 6 kW

Condition: good (used), Year of construction: 2008, Table size, pallet size: 500 x 500 mm Pallet quantity: 2 Maximum workpiece size: 730 x 500 mm Maximum table load: 500 kg Travel paths: Nwjdjr Drcmopfx Ac Aod X-axis: 630 mm Y-axis: 765 mm Z-axis: 510 mm C-axis: 360° (turntable) A-axis: +30°/-120° (swivel table) Speed range: 12 000 rpm Tool holder: SK 40 Tool positions: 80 Internal tool cooling: 20 bar Main drive power: 26 KW Machine weight: 17 000 kg Space requirement (LxWxH): 5 500 x 4 000 x 3 400 mm Control system: Mazatrol Matrix Accessories: Chip conveyor, complete documentation for the machine.

Condition: good (used), Year of construction: 2003, x-Weg 1270 mm y-Weg 660 mm z-Weg 610 mm Steuerung Ultimax 4 Tischbelastung 1300 kg Drehzahl 10.000 U/min Nwedpfx Aoiv R Hljc Aed Werkzeugwechseleinrichtung 24-fach Werkzeugaufnahme SK 40 Antrieb 15 kW Tischgröße 1500x660 mm Gesamtleistungsbedarf kW Maschinengewicht ca. 9 t Raumbedarf ca. 4,8x4,5x2,95 m

Condition: good (used), Year of construction: 1979, Single column vertical turning lathe BERTHIEZ TM500 SP, as follows: Manufacturer: Berthiez (France) Model: TM500 SP Year of manufacture: 1979 Main technical data: Table diameter: 6300 mm Njdpfx Aox A U Rasc Aewd Maximum turning diameter: 15000 mm Maximum usable height: 4000 mm Arm travel: 3600 mm Main motor power: 100 kW Maximum allowable load on faceplate: 80 t Ram size: 360x360 mm Machine weight approx. 230 tons The machine can perform both turning and milling operations. Do not hesitate to contact us for any additional information.

Condition: good (used), Year of construction: 2003, functionality: fully functional, For sale used Mori Seiki VL-25A1 in excellent condition. Nwjdsuf Tb Uepfx Ac Asd Year: 2003 Mori Siki Mori Siki Mori Siki Mori Siki, 2003. Delivery parity: EXW Székesfehérvár. We can assist in disassembling and assembling the machine on request.

Condition: like new (used), functionality: fully functional, type of input current: three-phase, total length: 1,945 mm, total height: 1,375 mm, total width: 1,206 mm, input voltage: 400 V, overall weight: 600 kg, year of last overhaul: 2026, roll width: 580 mm, air pressure: 6 bar, film width: 580 mm, Equipment: CE marking, Vertical Packaging Machine Ilapak Vegatronic 500 VT500 Nwsdpsyw Ud Sjfx Ac Asd The machine is in very good condition and ready for operation. - Maximum package width: 270 mm - Minimum package width: 50 mm - Maximum package length: 350 mm - Maximum film width: 580 mm - Sealing jaw width: 300 mm - Sealing jaw type: constant heat - Control: PLC, HMI Omron - Memory: 40 programs - Power supply voltage: 400V AC - Output up to 100 pcs/min - Machine dimensions: 1206x1945x1375 mm - Machine weight: 600 kg - Possible integration with weigher, printer

Year of construction: 1995, condition: ready for operation (used), machine/vehicle number: 20910, table mounting size: 1000 x 490 mm movements x/y/z: 800/510/500 mm spindle taper: ISO 40 ISA min./max. distance table/spindle: 120/620 mm spindle turning speed range: 40 - 6000 rpm number of tool positions: 22 pieces carriages: x/y 1 - 3200 / z 1 - 2000 mm/min Nwodpfx Acjdt Ttks Asd rapid move: x/y 1 - 3,2, z 1 - 2 m/min electrical connection: 380 V, 19 kW space needed: 2850 x 2150 x 2600 mm weight: 3800 kg